openkylin
/
platform_kernel-5.15
mirror of https://gitee.com/openkylin/platform_kernel-5.15.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity

i.MX fixes for 5.13: 

- Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform
   pm code.
 - A couple of patches from Fabio Estevam to fix 'tuning-step' property
   in imx7d-meerkat96 and imx7d-pico DT.
 - Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT.
 - A couple of patches from Lucas Stach to fix regulator and voltage for
   imx8mq-zii-ultra board.
 - Add missing regulators for imx6q-dhcom to avoid possible instability
   issues.
 - Fix memory-controller settings for fsl-ls1028a DT.
 - Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28
   boards.
 - Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmCu8p4UHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM7k+Qf9Ek/atJBjaaVzhbGFQ8HRnDOk4U5J
 dR0GbXKSN1zXjDLSBOBRyNcVn2T6lp4LwwYoleC2qG6MNoe6+y7fk1oRdvjkGjRO
 ZYfZT/JJl187IN6JsxR8VhRmmcI5/C3bihMbpKoLdHcPGbwC4relfSy99Io94Xfk
 CVn3PTxBA4KfoDq/+EiA9HkQ/HwQh/y7KD5yVd6OtLkt9awT1hYW1ttVefp95nAK
 5+zTm0Z14U8aGm+wo8jywvSyeXiuMeWDUrweo05XcaHWfcv3T0Wni7tgS2pluxqa
 lCMsNQBsZDTk6fUWxqPjjAEl6ks8N1H9L7YIGpq1dOCSYFUqI3jCmkhrFQ==
 =5vQk
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.13:

- Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform
  pm code.
- A couple of patches from Fabio Estevam to fix 'tuning-step' property
  in imx7d-meerkat96 and imx7d-pico DT.
- Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT.
- A couple of patches from Lucas Stach to fix regulator and voltage for
  imx8mq-zii-ultra board.
- Add missing regulators for imx6q-dhcom to avoid possible instability
  issues.
- Fix memory-controller settings for fsl-ls1028a DT.
- Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28
  boards.
- Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board.

* tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
  ARM: dts: imx7d-pico: Fix the 'tuning-step' property
  ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
  arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
  arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
  ARM: imx: pm-imx27: Include "common.h"
  arm64: dts: zii-ultra: fix 12V_MAIN voltage
  arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
  arm64: dts: ls1028a: fix memory node
  ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
  ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch

Link: https://lore.kernel.org/r/20210527011758.GD8194@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2021-06-05 15:24:10 -07:00
parent c4681547bc b73eb6b3b9
commit 3a2d3ae067
11 changed files with 39 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
View File

@ -105,9 +105,13 @@ &fec {
phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
phy-reset-duration = <20>;
phy-supply = <&sw2_reg>;
phy-handle = <&ethphy0>;
status = "okay";
fixed-link {
speed = <1000>;
full-duplex;
};
mdio {
#address-cells = <1>;
#size-cells = <0>;

12
arch/arm/boot/dts/imx6q-dhcom-som.dtsi
View File

@ -406,6 +406,18 @@ &reg_soc {
vin-supply = <&sw1_reg>;
};
&reg_pu {
vin-supply = <&sw1_reg>;
};
&reg_vdd1p1 {
vin-supply = <&sw2_reg>;
};
&reg_vdd2p5 {
vin-supply = <&sw2_reg>;
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;

2
arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
View File

@ -126,7 +126,7 @@ boardid: gpio@3a {
compatible = "nxp,pca8574";
reg = <0x3a>;
gpio-controller;
#gpio-cells = <1>;
#gpio-cells = <2>;
};
};

2
arch/arm/boot/dts/imx7d-meerkat96.dts
View File

@ -193,7 +193,7 @@ &usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
keep-power-in-suspend;
tuning-step = <2>;
fsl,tuning-step = <2>;
vmmc-supply = <&reg_3p3v>;
no-1-8-v;
broken-cd;

2
arch/arm/boot/dts/imx7d-pico.dtsi
View File

@ -351,7 +351,7 @@ &usdhc1 {
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
bus-width = <4>;
tuning-step = <2>;
fsl,tuning-step = <2>;
vmmc-supply = <&reg_3p3v>;
wakeup-source;
no-1-8-v;

1
arch/arm/mach-imx/pm-imx27.c
View File

@ -12,6 +12,7 @@
#include <linux/suspend.h>
#include <linux/io.h>
#include "common.h"
#include "hardware.h"
static int mx27_suspend_enter(suspend_state_t state)

3
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
View File

@ -46,7 +46,8 @@ phy0: ethernet-phy@4 {
eee-broken-100tx;
qca,clk-out-frequency = <125000000>;
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
vddio-supply = <&vddh>;
qca,keep-pll-enabled;
vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-name = "VDDIO";

5
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
View File

@ -31,11 +31,10 @@ phy1: ethernet-phy@4 {
reg = <0x4>;
eee-broken-1000t;
eee-broken-100tx;
qca,clk-out-frequency = <125000000>;
qca,clk-out-strength = <AR803X_STRENGTH_FULL>;
vddio-supply = <&vddh>;
qca,keep-pll-enabled;
vddio-supply = <&vddio>;
vddio: vddio-regulator {
regulator-name = "VDDIO";

4
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
View File

@ -197,8 +197,8 @@ soc: soc {
ddr: memory-controller@1080000 {
compatible = "fsl,qoriq-memory-controller";
reg = <0x0 0x1080000 0x0 0x1000>;
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
big-endian;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
little-endian;
};
dcfg: syscon@1e00000 {

10
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dts
View File

@ -88,11 +88,11 @@ codec2: codec@18 {
pinctrl-0 = <&pinctrl_codec2>;
reg = <0x18>;
#sound-dai-cells = <0>;
HPVDD-supply = <&reg_3p3v>;
SPRVDD-supply = <&reg_3p3v>;
SPLVDD-supply = <&reg_3p3v>;
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
HPVDD-supply = <&reg_gen_3p3>;
SPRVDD-supply = <&reg_gen_3p3>;
SPLVDD-supply = <&reg_gen_3p3>;
AVDD-supply = <&reg_gen_3p3>;
IOVDD-supply = <&reg_gen_3p3>;
DVDD-supply = <&vgen4_reg>;
reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
};

23
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
View File

@ -45,8 +45,8 @@ pcie1_refclk: clock-pcie1-refclk {
reg_12p0_main: regulator-12p0-main {
compatible = "regulator-fixed";
regulator-name = "12V_MAIN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
};
@ -77,15 +77,6 @@ reg_gen_3p3: regulator-gen-3p3 {
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
vin-supply = <&reg_3p3_main>;
regulator-name = "GEN_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usdhc2_vmmc: regulator-vsd-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2>;
@ -415,11 +406,11 @@ codec1: codec@18 {
pinctrl-0 = <&pinctrl_codec1>;
reg = <0x18>;
#sound-dai-cells = <0>;
HPVDD-supply = <&reg_3p3v>;
SPRVDD-supply = <&reg_3p3v>;
SPLVDD-supply = <&reg_3p3v>;
AVDD-supply = <&reg_3p3v>;
IOVDD-supply = <&reg_3p3v>;
HPVDD-supply = <&reg_gen_3p3>;
SPRVDD-supply = <&reg_gen_3p3>;
SPLVDD-supply = <&reg_gen_3p3>;
AVDD-supply = <&reg_gen_3p3>;
IOVDD-supply = <&reg_gen_3p3>;
DVDD-supply = <&vgen4_reg>;
reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
};