Merge branch 'pm-avs'

* pm-avs:
  MAINTAINERS: update entry for drivers/power/avs
  PM / AVS: rockchip-io: add driver handling Rockchip io domains
  regulator: core: Add REGULATOR_EVENT_PRE_VOLTAGE_CHANGE (and ABORT)

Documentation/devicetree/bindings/power/rockchip-io-domain.txt

@@ -0,0 +1,83 @@
+Rockchip SRAM for IO Voltage Domains:
+-------------------------------------
+
+IO domain voltages on some Rockchip SoCs are variable but need to be
+kept in sync between the regulators and the SoC using a special
+register.
+
+A specific example using rk3288:
+- If the regulator hooked up to a pin like SDMMC0_VDD is 3.3V then
+  bit 7 of GRF_IO_VSEL needs to be 0.  If the regulator hooked up to
+  that same pin is 1.8V then bit 7 of GRF_IO_VSEL needs to be 1.
+
+Said another way, this driver simply handles keeping bits in the SoC's
+general register file (GRF) in sync with the actual value of a voltage
+hooked up to the pins.
+
+Note that this driver specifically doesn't include:
+- any logic for deciding what voltage we should set regulators to
+- any logic for deciding whether regulators (or internal SoC blocks)
+  should have power or not have power
+
+If there were some other software that had the smarts of making
+decisions about regulators, it would work in conjunction with this
+driver.  When that other software adjusted a regulator's voltage then
+this driver would handle telling the SoC about it.  A good example is
+vqmmc for SD.  In that case the dw_mmc driver simply is told about a
+regulator.  It changes the regulator between 3.3V and 1.8V at the
+right time.  This driver notices the change and makes sure that the
+SoC is on the same page.
+
+
+Required properties:
+- compatible: should be one of:
+  - "rockchip,rk3188-io-voltage-domain" for rk3188
+  - "rockchip,rk3288-io-voltage-domain" for rk3288
+- rockchip,grf: phandle to the syscon managing the "general register files"
+
+
+You specify supplies using the standard regulator bindings by including
+a phandle the the relevant regulator.  All specified supplies must be able
+to report their voltage.  The IO Voltage Domain for any non-specified
+supplies will be not be touched.
+
+Possible supplies for rk3188:
+- ap0-supply:    The supply connected to AP0_VCC.
+- ap1-supply:    The supply connected to AP1_VCC.
+- cif-supply:    The supply connected to CIF_VCC.
+- flash-supply:  The supply connected to FLASH_VCC.
+- lcdc0-supply:  The supply connected to LCD0_VCC.
+- lcdc1-supply:  The supply connected to LCD1_VCC.
+- vccio0-supply: The supply connected to VCCIO0.
+- vccio1-supply: The supply connected to VCCIO1.
+                 Sometimes also labeled VCCIO1 and VCCIO2.
+
+Possible supplies for rk3288:
+- audio-supply:  The supply connected to APIO4_VDD.
+- bb-supply:     The supply connected to APIO5_VDD.
+- dvp-supply:    The supply connected to DVPIO_VDD.
+- flash0-supply: The supply connected to FLASH0_VDD.  Typically for eMMC
+- flash1-supply: The supply connected to FLASH1_VDD.  Also known as SDIO1.
+- gpio30-supply: The supply connected to APIO1_VDD.
+- gpio1830       The supply connected to APIO2_VDD.
+- lcdc-supply:   The supply connected to LCDC_VDD.
+- sdcard-supply: The supply connected to SDMMC0_VDD.
+- wifi-supply:   The supply connected to APIO3_VDD.  Also known as SDIO0.
+
+
+Example:
+
+	io-domains {
+		compatible = "rockchip,rk3288-io-voltage-domain";
+		rockchip,grf = <&grf>;
+
+		audio-supply = <&vcc18_codec>;
+		bb-supply = <&vcc33_io>;
+		dvp-supply = <&vcc_18>;
+		flash0-supply = <&vcc18_flashio>;
+		gpio1830-supply = <&vcc33_io>;
+		gpio30-supply = <&vcc33_pmuio>;
+		lcdc-supply = <&vcc33_lcd>;
+		sdcard-supply = <&vccio_sd>;
+		wifi-supply = <&vcc18_wl>;
+	};

MAINTAINERS

@@ -8414,11 +8414,11 @@ S:	Maintained
 F:	Documentation/security/Smack.txt
 F:	security/smack/
 
-SMARTREFLEX DRIVERS FOR ADAPTIVE VOLTAGE SCALING (AVS)
+DRIVERS FOR ADAPTIVE VOLTAGE SCALING (AVS)
 M:	Kevin Hilman <khilman@kernel.org>
 M:	Nishanth Menon <nm@ti.com>
 S:	Maintained
-F:	drivers/power/avs/smartreflex.c
+F:	drivers/power/avs/
 F:	include/linux/power/smartreflex.h
 L:	linux-pm@vger.kernel.org
 

drivers/power/avs/Kconfig

@@ -10,3 +10,11 @@ menuconfig POWER_AVS
 	  AVS is also called SmartReflex on OMAP devices.
 
 	  Say Y here to enable Adaptive Voltage Scaling class support.
+
+config ROCKCHIP_IODOMAIN
+        tristate "Rockchip IO domain support"
+        depends on ARCH_ROCKCHIP && OF
+        help
+          Say y here to enable support io domains on Rockchip SoCs. It is
+          necessary for the io domain setting of the SoC to match the
+          voltage supplied by the regulators.

drivers/power/avs/Makefile

@@ -1 +1,2 @@
 obj-$(CONFIG_POWER_AVS_OMAP)		+= smartreflex.o
+obj-$(CONFIG_ROCKCHIP_IODOMAIN)		+= rockchip-io-domain.o

drivers/power/avs/rockchip-io-domain.c

@@ -0,0 +1,351 @@
+/*
+ * Rockchip IO Voltage Domain driver
+ *
+ * Copyright 2014 MundoReader S.L.
+ * Copyright 2014 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#define MAX_SUPPLIES		16
+
+/*
+ * The max voltage for 1.8V and 3.3V come from the Rockchip datasheet under
+ * "Recommended Operating Conditions" for "Digital GPIO".   When the typical
+ * is 3.3V the max is 3.6V.  When the typical is 1.8V the max is 1.98V.
+ *
+ * They are used like this:
+ * - If the voltage on a rail is above the "1.8" voltage (1.98V) we'll tell the
+ *   SoC we're at 3.3.
+ * - If the voltage on a rail is above the "3.3" voltage (3.6V) we'll consider
+ *   that to be an error.
+ */
+#define MAX_VOLTAGE_1_8		1980000
+#define MAX_VOLTAGE_3_3		3600000
+
+#define RK3288_SOC_CON2			0x24c
+#define RK3288_SOC_CON2_FLASH0		BIT(7)
+#define RK3288_SOC_FLASH_SUPPLY_NUM	2
+
+struct rockchip_iodomain;
+
+/**
+ * @supplies: voltage settings matching the register bits.
+ */
+struct rockchip_iodomain_soc_data {
+	int grf_offset;
+	const char *supply_names[MAX_SUPPLIES];
+	void (*init)(struct rockchip_iodomain *iod);
+};
+
+struct rockchip_iodomain_supply {
+	struct rockchip_iodomain *iod;
+	struct regulator *reg;
+	struct notifier_block nb;
+	int idx;
+};
+
+struct rockchip_iodomain {
+	struct device *dev;
+	struct regmap *grf;
+	struct rockchip_iodomain_soc_data *soc_data;
+	struct rockchip_iodomain_supply supplies[MAX_SUPPLIES];
+};
+
+static int rockchip_iodomain_write(struct rockchip_iodomain_supply *supply,
+				   int uV)
+{
+	struct rockchip_iodomain *iod = supply->iod;
+	u32 val;
+	int ret;
+
+	/* set value bit */
+	val = (uV > MAX_VOLTAGE_1_8) ? 0 : 1;
+	val <<= supply->idx;
+
+	/* apply hiword-mask */
+	val |= (BIT(supply->idx) << 16);
+
+	ret = regmap_write(iod->grf, iod->soc_data->grf_offset, val);
+	if (ret)
+		dev_err(iod->dev, "Couldn't write to GRF\n");
+
+	return ret;
+}
+
+static int rockchip_iodomain_notify(struct notifier_block *nb,
+				    unsigned long event,
+				    void *data)
+{
+	struct rockchip_iodomain_supply *supply =
+			container_of(nb, struct rockchip_iodomain_supply, nb);
+	int uV;
+	int ret;
+
+	/*
+	 * According to Rockchip it's important to keep the SoC IO domain
+	 * higher than (or equal to) the external voltage.  That means we need
+	 * to change it before external voltage changes happen in the case
+	 * of an increase.
+	 *
+	 * Note that in the "pre" change we pick the max possible voltage that
+	 * the regulator might end up at (the client requests a range and we
+	 * don't know for certain the exact voltage).  Right now we rely on the
+	 * slop in MAX_VOLTAGE_1_8 and MAX_VOLTAGE_3_3 to save us if clients
+	 * request something like a max of 3.6V when they really want 3.3V.
+	 * We could attempt to come up with better rules if this fails.
+	 */
+	if (event & REGULATOR_EVENT_PRE_VOLTAGE_CHANGE) {
+		struct pre_voltage_change_data *pvc_data = data;
+
+		uV = max_t(unsigned long, pvc_data->old_uV, pvc_data->max_uV);
+	} else if (event & (REGULATOR_EVENT_VOLTAGE_CHANGE |
+			    REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE)) {
+		uV = (unsigned long)data;
+	} else {
+		return NOTIFY_OK;
+	}
+
+	dev_dbg(supply->iod->dev, "Setting to %d\n", uV);
+
+	if (uV > MAX_VOLTAGE_3_3) {
+		dev_err(supply->iod->dev, "Voltage too high: %d\n", uV);
+
+		if (event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
+			return NOTIFY_BAD;
+	}
+
+	ret = rockchip_iodomain_write(supply, uV);
+	if (ret && event == REGULATOR_EVENT_PRE_VOLTAGE_CHANGE)
+		return NOTIFY_BAD;
+
+	dev_info(supply->iod->dev, "Setting to %d done\n", uV);
+	return NOTIFY_OK;
+}
+
+static void rk3288_iodomain_init(struct rockchip_iodomain *iod)
+{
+	int ret;
+	u32 val;
+
+	/* if no flash supply we should leave things alone */
+	if (!iod->supplies[RK3288_SOC_FLASH_SUPPLY_NUM].reg)
+		return;
+
+	/*
+	 * set flash0 iodomain to also use this framework
+	 * instead of a special gpio.
+	 */
+	val = RK3288_SOC_CON2_FLASH0 | (RK3288_SOC_CON2_FLASH0 << 16);
+	ret = regmap_write(iod->grf, RK3288_SOC_CON2, val);
+	if (ret < 0)
+		dev_warn(iod->dev, "couldn't update flash0 ctrl\n");
+}
+
+/*
+ * On the rk3188 the io-domains are handled by a shared register with the
+ * lower 8 bits being still being continuing drive-strength settings.
+ */
+static const struct rockchip_iodomain_soc_data soc_data_rk3188 = {
+	.grf_offset = 0x104,
+	.supply_names = {
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		NULL,
+		"ap0",
+		"ap1",
+		"cif",
+		"flash",
+		"vccio0",
+		"vccio1",
+		"lcdc0",
+		"lcdc1",
+	},
+};
+
+static const struct rockchip_iodomain_soc_data soc_data_rk3288 = {
+	.grf_offset = 0x380,
+	.supply_names = {
+		"lcdc",		/* LCDC_VDD */
+		"dvp",		/* DVPIO_VDD */
+		"flash0",	/* FLASH0_VDD (emmc) */
+		"flash1",	/* FLASH1_VDD (sdio1) */
+		"wifi",		/* APIO3_VDD  (sdio0) */
+		"bb",		/* APIO5_VDD */
+		"audio",	/* APIO4_VDD */
+		"sdcard",	/* SDMMC0_VDD (sdmmc) */
+		"gpio30",	/* APIO1_VDD */
+		"gpio1830",	/* APIO2_VDD */
+	},
+	.init = rk3288_iodomain_init,
+};
+
+static const struct of_device_id rockchip_iodomain_match[] = {
+	{
+		.compatible = "rockchip,rk3188-io-voltage-domain",
+		.data = (void *)&soc_data_rk3188
+	},
+	{
+		.compatible = "rockchip,rk3288-io-voltage-domain",
+		.data = (void *)&soc_data_rk3288
+	},
+	{ /* sentinel */ },
+};
+
+static int rockchip_iodomain_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct rockchip_iodomain *iod;
+	int i, ret = 0;
+
+	if (!np)
+		return -ENODEV;
+
+	iod = devm_kzalloc(&pdev->dev, sizeof(*iod), GFP_KERNEL);
+	if (!iod)
+		return -ENOMEM;
+
+	iod->dev = &pdev->dev;
+	platform_set_drvdata(pdev, iod);
+
+	match = of_match_node(rockchip_iodomain_match, np);
+	iod->soc_data = (struct rockchip_iodomain_soc_data *)match->data;
+
+	iod->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
+	if (IS_ERR(iod->grf)) {
+		dev_err(&pdev->dev, "couldn't find grf regmap\n");
+		return PTR_ERR(iod->grf);
+	}
+
+	for (i = 0; i < MAX_SUPPLIES; i++) {
+		const char *supply_name = iod->soc_data->supply_names[i];
+		struct rockchip_iodomain_supply *supply = &iod->supplies[i];
+		struct regulator *reg;
+		int uV;
+
+		if (!supply_name)
+			continue;
+
+		reg = devm_regulator_get_optional(iod->dev, supply_name);
+		if (IS_ERR(reg)) {
+			ret = PTR_ERR(reg);
+
+			/* If a supply wasn't specified, that's OK */
+			if (ret == -ENODEV)
+				continue;
+			else if (ret != -EPROBE_DEFER)
+				dev_err(iod->dev, "couldn't get regulator %s\n",
+					supply_name);
+			goto unreg_notify;
+		}
+
+		/* set initial correct value */
+		uV = regulator_get_voltage(reg);
+
+		/* must be a regulator we can get the voltage of */
+		if (uV < 0) {
+			dev_err(iod->dev, "Can't determine voltage: %s\n",
+				supply_name);
+			goto unreg_notify;
+		}
+
+		if (uV > MAX_VOLTAGE_3_3) {
+			dev_crit(iod->dev,
+				 "%d uV is too high. May damage SoC!\n",
+				 uV);
+			ret = -EINVAL;
+			goto unreg_notify;
+		}
+
+		/* setup our supply */
+		supply->idx = i;
+		supply->iod = iod;
+		supply->reg = reg;
+		supply->nb.notifier_call = rockchip_iodomain_notify;
+
+		ret = rockchip_iodomain_write(supply, uV);
+		if (ret) {
+			supply->reg = NULL;
+			goto unreg_notify;
+		}
+
+		/* register regulator notifier */
+		ret = regulator_register_notifier(reg, &supply->nb);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"regulator notifier request failed\n");
+			supply->reg = NULL;
+			goto unreg_notify;
+		}
+	}
+
+	if (iod->soc_data->init)
+		iod->soc_data->init(iod);
+
+	return 0;
+
+unreg_notify:
+	for (i = MAX_SUPPLIES - 1; i >= 0; i--) {
+		struct rockchip_iodomain_supply *io_supply = &iod->supplies[i];
+
+		if (io_supply->reg)
+			regulator_unregister_notifier(io_supply->reg,
+						      &io_supply->nb);
+	}
+
+	return ret;
+}
+
+static int rockchip_iodomain_remove(struct platform_device *pdev)
+{
+	struct rockchip_iodomain *iod = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = MAX_SUPPLIES - 1; i >= 0; i--) {
+		struct rockchip_iodomain_supply *io_supply = &iod->supplies[i];
+
+		if (io_supply->reg)
+			regulator_unregister_notifier(io_supply->reg,
+						      &io_supply->nb);
+	}
+
+	return 0;
+}
+
+static struct platform_driver rockchip_iodomain_driver = {
+	.probe   = rockchip_iodomain_probe,
+	.remove  = rockchip_iodomain_remove,
+	.driver  = {
+		.name  = "rockchip-iodomain",
+		.of_match_table = rockchip_iodomain_match,
+	},
+};
+
+module_platform_driver(rockchip_iodomain_driver);
+
+MODULE_DESCRIPTION("Rockchip IO-domain driver");
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_AUTHOR("Doug Anderson <dianders@chromium.org>");
+MODULE_LICENSE("GPL v2");

drivers/regulator/core.c

@@ -102,7 +102,7 @@ static int _regulator_disable(struct regulator_dev *rdev);
 static int _regulator_get_voltage(struct regulator_dev *rdev);
 static int _regulator_get_current_limit(struct regulator_dev *rdev);
 static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
-static void _notifier_call_chain(struct regulator_dev *rdev,
+static int _notifier_call_chain(struct regulator_dev *rdev,
 				  unsigned long event, void *data);
 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 				     int min_uV, int max_uV);
@@ -2369,6 +2369,55 @@ int regulator_is_supported_voltage(struct regulator *regulator,
 }
 EXPORT_SYMBOL_GPL(regulator_is_supported_voltage);
 
+static int _regulator_call_set_voltage(struct regulator_dev *rdev,
+				       int min_uV, int max_uV,
+				       unsigned *selector)
+{
+	struct pre_voltage_change_data data;
+	int ret;
+
+	data.old_uV = _regulator_get_voltage(rdev);
+	data.min_uV = min_uV;
+	data.max_uV = max_uV;
+	ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE,
+				   &data);
+	if (ret & NOTIFY_STOP_MASK)
+		return -EINVAL;
+
+	ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV, selector);
+	if (ret >= 0)
+		return ret;
+
+	_notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE,
+			     (void *)data.old_uV);
+
+	return ret;
+}
+
+static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev,
+					   int uV, unsigned selector)
+{
+	struct pre_voltage_change_data data;
+	int ret;
+
+	data.old_uV = _regulator_get_voltage(rdev);
+	data.min_uV = uV;
+	data.max_uV = uV;
+	ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE,
+				   &data);
+	if (ret & NOTIFY_STOP_MASK)
+		return -EINVAL;
+
+	ret = rdev->desc->ops->set_voltage_sel(rdev, selector);
+	if (ret >= 0)
+		return ret;
+
+	_notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE,
+			     (void *)data.old_uV);
+
+	return ret;
+}
+
 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 				     int min_uV, int max_uV)
 {
@@ -2396,8 +2445,8 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	}
 
 	if (rdev->desc->ops->set_voltage) {
-		ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV,
+		ret = _regulator_call_set_voltage(rdev, min_uV, max_uV,
-						   &selector);
+						  &selector);
 
 		if (ret >= 0) {
 			if (rdev->desc->ops->list_voltage)
@@ -2432,8 +2481,8 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 				if (old_selector == selector)
 					ret = 0;
 				else
-					ret = rdev->desc->ops->set_voltage_sel(
+					ret = _regulator_call_set_voltage_sel(
-								rdev, ret);
+						rdev, best_val, selector);
 			} else {
 				ret = -EINVAL;
 			}
@@ -3079,11 +3128,11 @@ EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
 /* notify regulator consumers and downstream regulator consumers.
  * Note mutex must be held by caller.
  */
-static void _notifier_call_chain(struct regulator_dev *rdev,
+static int _notifier_call_chain(struct regulator_dev *rdev,
 				  unsigned long event, void *data)
 {
 	/* call rdev chain first */
-	blocking_notifier_call_chain(&rdev->notifier, event, data);
+	return blocking_notifier_call_chain(&rdev->notifier, event, data);
 }
 
 /**

include/linux/regulator/consumer.h

@@ -93,7 +93,12 @@ struct regmap;
  * OVER_TEMP      Regulator over temp.
  * FORCE_DISABLE  Regulator forcibly shut down by software.
  * VOLTAGE_CHANGE Regulator voltage changed.
+ *                Data passed is old voltage cast to (void *).
  * DISABLE        Regulator was disabled.
+ * PRE_VOLTAGE_CHANGE   Regulator is about to have voltage changed.
+ *                      Data passed is "struct pre_voltage_change_data"
+ * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
+ *                      Data passed is old voltage cast to (void *).
  *
  * NOTE: These events can be OR'ed together when passed into handler.
  */
@@ -106,6 +111,21 @@ struct regmap;
 #define REGULATOR_EVENT_FORCE_DISABLE		0x20
 #define REGULATOR_EVENT_VOLTAGE_CHANGE		0x40
 #define REGULATOR_EVENT_DISABLE 		0x80
+#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE	0x100
+#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE	0x200
+
+/**
+ * struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event
+ *
+ * @old_uV: Current voltage before change.
+ * @min_uV: Min voltage we'll change to.
+ * @max_uV: Max voltage we'll change to.
+ */
+struct pre_voltage_change_data {
+	unsigned long old_uV;
+	unsigned long min_uV;
+	unsigned long max_uV;
+};
 
 struct regulator;