From 5e549a0c18fc0321c18e7b6842cb7afc90aab396 Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:49 +0200 Subject: [PATCH 001/224] ASoC: tas571x: wait 50ms after oscillator trim Wait extra 50ms after writing the oscillator trim register in probe(), as recommended by the TAS5721 and TAS5711 datasheets. Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index df5e5cb33baa..de65ecf534af 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -754,6 +754,7 @@ static int tas571x_i2c_probe(struct i2c_client *client, if (ret) return ret; + usleep_range(50000, 60000); memcpy(&priv->codec_driver, &tas571x_codec, sizeof(priv->codec_driver)); priv->codec_driver.component_driver.controls = priv->chip->controls; From 960695670502afa153c2294e15ca790dbe086f4d Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:50 +0200 Subject: [PATCH 002/224] ASoC: tas571x: move mixer volume controls from TAS5711 to TAS5717 Channel 1 and 2 Mixer Volume controls (registers 0x72/0x73 and 0x76/0x77) were wrongly assigned to tas5711_controls in commit f252d2346022 ("ASoC: tas571x: add input channel mixer for TAS5717/19") Therefore move them to tas5717_controls. Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index de65ecf534af..34e4ce6f23d8 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -401,16 +401,6 @@ static const struct snd_kcontrol_new tas5711_controls[] = { TAS571X_SOFT_MUTE_REG, TAS571X_SOFT_MUTE_CH1_SHIFT, TAS571X_SOFT_MUTE_CH2_SHIFT, 1, 1), - - SOC_DOUBLE_R_RANGE("CH1 Mixer Volume", - TAS5717_CH1_LEFT_CH_MIX_REG, - TAS5717_CH1_RIGHT_CH_MIX_REG, - 16, 0, 0x80, 0), - - SOC_DOUBLE_R_RANGE("CH2 Mixer Volume", - TAS5717_CH2_LEFT_CH_MIX_REG, - TAS5717_CH2_RIGHT_CH_MIX_REG, - 16, 0, 0x80, 0), }; static const struct regmap_range tas571x_readonly_regs_range[] = { @@ -488,6 +478,16 @@ static const struct snd_kcontrol_new tas5717_controls[] = { TAS571X_SOFT_MUTE_CH1_SHIFT, TAS571X_SOFT_MUTE_CH2_SHIFT, 1, 1), + SOC_DOUBLE_R_RANGE("CH1 Mixer Volume", + TAS5717_CH1_LEFT_CH_MIX_REG, + TAS5717_CH1_RIGHT_CH_MIX_REG, + 16, 0, 0x80, 0), + + SOC_DOUBLE_R_RANGE("CH2 Mixer Volume", + TAS5717_CH2_LEFT_CH_MIX_REG, + TAS5717_CH2_RIGHT_CH_MIX_REG, + 16, 0, 0x80, 0), + /* * The biquads are named according to the register names. * Please note that TI's TAS57xx Graphical Development Environment From e54de7f555970915c3856e7709a7ff74d352f315 Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:47 +0200 Subject: [PATCH 003/224] ASoC: tas571x: extend the t_i2c time to comply with TAS5721 TAS5721 datasheet recommends to wait at least 13.5ms after deasserting the RESET signal. For TAS5717 this time is only 12ms, which was the original value in the code. Extend the wait time after deasserting RESET from 12 to 13.5ms to comply with the TAS5721 specification. Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index 34e4ce6f23d8..512b9e663e89 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -747,7 +747,7 @@ static int tas571x_i2c_probe(struct i2c_client *client, /* pulse the active low reset line for ~100us */ usleep_range(100, 200); gpiod_set_value(priv->reset_gpio, 0); - usleep_range(12000, 20000); + usleep_range(13500, 20000); } ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0); From 8b0678dc914271e9ad4317fe82555ead92ce1cb9 Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:48 +0200 Subject: [PATCH 004/224] ASoC: tas571x: remove improper PDN signal usage in set_bias_level The set_bias_level toggles the PDN signal when entering SND_SOC_BIAS_STANDBY and SND_SOC_BIAS_OFF. However this has no effect and actually breaks things down (tested with TAS5717) due to the following reasons: 1) holding down PDN does not save power but holding down RST does 2) now hard mute via register 0x5 is implemented and therefore it is no longer needed to toggle PDN to enter all channel shut down 3) in order to leave PDN it is required to toggle the RST signal (see TAS5721 datasheet), which was not implemented 4) toggling PDN as implemented actually mutes PWMs and there is no audio output (tested on TAS5717) For these reasons remove the PDN signal toggling and just initialize it to inactive in probe(). Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index 512b9e663e89..810369f687d7 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -341,20 +341,9 @@ static int tas571x_set_bias_level(struct snd_soc_codec *codec, return ret; } } - - gpiod_set_value(priv->pdn_gpio, 0); - usleep_range(5000, 6000); - - regcache_cache_only(priv->regmap, false); - ret = regcache_sync(priv->regmap); - if (ret) - return ret; } break; case SND_SOC_BIAS_OFF: - regcache_cache_only(priv->regmap, true); - gpiod_set_value(priv->pdn_gpio, 1); - if (!IS_ERR(priv->mclk)) clk_disable_unprepare(priv->mclk); break; @@ -771,9 +760,6 @@ static int tas571x_i2c_probe(struct i2c_client *client, return ret; } - regcache_cache_only(priv->regmap, true); - gpiod_set_value(priv->pdn_gpio, 1); - return snd_soc_register_codec(&client->dev, &priv->codec_driver, &tas571x_dai, 1); } From 0dcfc487e521ab2d7da5c512d74337c6e706855e Mon Sep 17 00:00:00 2001 From: Sathyanarayana Nujella Date: Tue, 4 Oct 2016 10:33:20 -0700 Subject: [PATCH 005/224] ASoC: Intel: report JACK_LINEOUT event This patch updates Jack type bitmask to include SND_JACK_LINEOUT while creating a new jack, so that LINEOUT events are reported properly. Signed-off-by: Sathyanarayana Nujella Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/boards/bxt_da7219_max98357a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c index 3774b117d365..2c93fa26e13b 100644 --- a/sound/soc/intel/boards/bxt_da7219_max98357a.c +++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c @@ -129,8 +129,8 @@ static int broxton_da7219_codec_init(struct snd_soc_pcm_runtime *rtd) */ ret = snd_soc_card_jack_new(rtd->card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3, &broxton_headset, - NULL, 0); + SND_JACK_BTN_2 | SND_JACK_BTN_3 | SND_JACK_LINEOUT, + &broxton_headset, NULL, 0); if (ret) { dev_err(rtd->dev, "Headset Jack creation failed: %d\n", ret); return ret; From 7c45e3cc6a59fb00edea65dfb6d3ae60403e4539 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 26 Oct 2015 12:35:02 +0900 Subject: [PATCH 006/224] ASoC: topology: Reenable use from userspace We had inserted a #error into the topology UAPI code to ensure that the ABI was not adopted by userspace while final review and testing was ongoing. The idea was that some finishing touches would be made to the ABI before declaring it stable and suitable for use in production but this has not yet happened as more than a year later revisions to the ABI are still onging. The reality however is that people are shipping topology files in production and these ABI changes are causing practical issues for users and we can't break userspace. This makes this error pointless so we should remove it. Signed-off-by: Mark Brown Acked-by: Vinod Koul --- include/uapi/sound/asoc.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/include/uapi/sound/asoc.h b/include/uapi/sound/asoc.h index 33d00a4ce656..819d895edfdc 100644 --- a/include/uapi/sound/asoc.h +++ b/include/uapi/sound/asoc.h @@ -18,12 +18,6 @@ #include #include -#ifndef __KERNEL__ -#error This API is an early revision and not enabled in the current -#error kernel release, it will be enabled in a future kernel version -#error with incompatible changes to what is here. -#endif - /* * Maximum number of channels topology kcontrol can represent. */ From c3474e211576fc88ddd1f3e8ce3b06a2051438e7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 10 Oct 2016 14:33:20 +0200 Subject: [PATCH 007/224] ASoC: Intel: haswell depends on sst-firmware The Intel Haswell audio support fails to link if CONFIG_SND_SOC_INTEL_SST_FIRMWARE is disabled: sst-haswell-dsp.c: undefined reference to `sst_mem_block_register' sst-haswell-dsp.c: undefined reference to `sst_mem_block_unregister_all' sst-haswell-dsp.c: undefined reference to `sst_module_alloc_blocks' sst-haswell-dsp.c: undefined reference to `sst_module_free' sst-haswell-dsp.c: undefined reference to `sst_module_new' sst-haswell-pcm.c: undefined reference to `sst_module_get_from_id' sst-haswell-pcm.c: undefined reference to `sst_module_runtime_restore' sst-haswell-pcm.c: undefined reference to `sst_module_runtime_save' ERROR: "sst_block_alloc_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_block_free_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_copyfrom" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_copyto" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_get_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_put_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_free" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_get_offset" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_free_all" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_reload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_unload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_alloc_blocks" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_get_from_id" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! This moves the 'select' statement from two of the three haswell based users into the line that is used by all of them, so make it harder to get wrong and to fix the existing randconfig regressions. Fixes: 2d995e5dc283 ("ASoC: Intel: boards: Add bdw-rt5677 machine driver") Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown --- sound/soc/intel/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index a20c3dfbcb5d..54dec9161cef 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -46,6 +46,7 @@ config SND_SOC_INTEL_SST_MATCH config SND_SOC_INTEL_HASWELL tristate + select SND_SOC_INTEL_SST_FIRMWARE config SND_SOC_INTEL_BAYTRAIL tristate @@ -55,7 +56,6 @@ config SND_SOC_INTEL_HASWELL_MACH depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM depends on DW_DMAC_CORE select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SST_FIRMWARE select SND_SOC_INTEL_HASWELL select SND_SOC_RT5640 help @@ -126,7 +126,6 @@ config SND_SOC_INTEL_BROADWELL_MACH I2C_DESIGNWARE_PLATFORM depends on DW_DMAC_CORE select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SST_FIRMWARE select SND_SOC_INTEL_HASWELL select SND_SOC_RT286 help From aa5f920993bda2095952177eea79bc8e58ae6065 Mon Sep 17 00:00:00 2001 From: murray foster Date: Sun, 9 Oct 2016 13:28:45 -0700 Subject: [PATCH 008/224] ASoC: cs4270: fix DAPM stream name mismatch Mismatching stream names in DAPM route and widget definitions are causing compilation errors. Fixing these names allows the cs4270 driver to compile and function. [Errors must be at probe time not compile time -- broonie] Signed-off-by: Murray Foster Acked-by: Paul Handrigan Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/cs4270.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 18baea2f7d65..84f86745c30e 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -148,11 +148,11 @@ SND_SOC_DAPM_OUTPUT("AOUTR"), }; static const struct snd_soc_dapm_route cs4270_dapm_routes[] = { - { "Capture", NULL, "AINA" }, - { "Capture", NULL, "AINB" }, + { "Capture", NULL, "AINL" }, + { "Capture", NULL, "AINR" }, - { "AOUTA", NULL, "Playback" }, - { "AOUTB", NULL, "Playback" }, + { "AOUTL", NULL, "Playback" }, + { "AOUTR", NULL, "Playback" }, }; /** From c975e39ccadf6dc047356c60773a043a2293b8cd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 13 Oct 2016 11:47:13 +0300 Subject: [PATCH 009/224] ASoC: rt5663: fix a debug statement We increment "i" before printing the debug statement. That makes it the wrong sleep_time[] information and Smatch complains that the last increment could be beyond the end of the array. Signed-off-by: Dan Carpenter Acked-by: Bard Liao Signed-off-by: Mark Brown --- sound/soc/codecs/rt5663.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c index 01a18d88f1eb..00ff2788879e 100644 --- a/sound/soc/codecs/rt5663.c +++ b/sound/soc/codecs/rt5663.c @@ -1547,11 +1547,11 @@ static int rt5663_jack_detect(struct snd_soc_codec *codec, int jack_insert) msleep(sleep_time[i]); val = snd_soc_read(codec, RT5663_EM_JACK_TYPE_2) & 0x0003; + dev_dbg(codec->dev, "%s: MX-00e7 val=%x sleep %d\n", + __func__, val, sleep_time[i]); i++; if (val == 0x1 || val == 0x2 || val == 0x3) break; - dev_dbg(codec->dev, "%s: MX-00e7 val=%x sleep %d\n", - __func__, val, sleep_time[i]); } dev_dbg(codec->dev, "%s val = %d\n", __func__, val); switch (val) { From 4a262b14c57d6ec88982d40273e742f7b9151560 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Wed, 12 Oct 2016 20:31:41 +0800 Subject: [PATCH 010/224] clk: rockchip: don't return NULL when failing to register ddrclk branch rockchip_clk_register_ddrclk should not return NULL when failing to call clk_register, otherwise rockchip_clk_register_branches prints "unknown clock type". The actual case is that it's a known clock type but we fail to register it, which may makes user confuse the reason of failure. And the pr_err here is pointless as rockchip_clk_register_branches will also print the similar message. Signed-off-by: Shawn Lin Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-ddr.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/clk/rockchip/clk-ddr.c b/drivers/clk/rockchip/clk-ddr.c index 8feba93672c5..e8075359366b 100644 --- a/drivers/clk/rockchip/clk-ddr.c +++ b/drivers/clk/rockchip/clk-ddr.c @@ -144,11 +144,8 @@ struct clk *rockchip_clk_register_ddrclk(const char *name, int flags, ddrclk->ddr_flag = ddr_flag; clk = clk_register(NULL, &ddrclk->hw); - if (IS_ERR(clk)) { - pr_err("%s: could not register ddrclk %s\n", __func__, name); + if (IS_ERR(clk)) kfree(ddrclk); - return NULL; - } return clk; } From 446647d4b9b90335f29a06ec21a05b508e269866 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 19 Oct 2016 13:27:40 +0300 Subject: [PATCH 011/224] ideapad-laptop: Add another DMI entry for Yoga 900 This particular laptop has its motherboard replaced and after that, even with the latest BIOS, some DMI identification strings have become "INVALID". This includes DMI_PRODUCT_VERSION which results Wifi being blocked. It seems that DMI_BOARD_NAME is still valid so use that as an alternative for Lenovo Yoga 900. Signed-off-by: Mika Westerberg Signed-off-by: Darren Hart --- drivers/platform/x86/ideapad-laptop.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index a2323941e677..a7614fc542b5 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -933,6 +933,13 @@ static const struct dmi_system_id no_hw_rfkill_list[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 900"), }, }, + { + .ident = "Lenovo Yoga 900", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BOARD_NAME, "VIUU4"), + }, + }, { .ident = "Lenovo YOGA 910-13IKB", .matches = { From 1c80e9603fe8341ed5bea696747d07083d5e0476 Mon Sep 17 00:00:00 2001 From: Azael Avalos Date: Thu, 25 Aug 2016 12:50:55 -0600 Subject: [PATCH 012/224] toshiba-wmi: Fix loading the driver on non Toshiba laptops Bug 150611 uncovered that the WMI ID used by the toshiba-wmi driver is not Toshiba specific, and as such, the driver was being loaded on non Toshiba laptops too. This patch adds a DMI matching list checking for TOSHIBA as the vendor, refusing to load if it is not. Also the WMI GUID was renamed, dropping the TOSHIBA_ prefix, to better reflect that such GUID is not a Toshiba specific one. Cc: # 4.4+ Signed-off-by: Azael Avalos Signed-off-by: Darren Hart --- drivers/platform/x86/toshiba-wmi.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/drivers/platform/x86/toshiba-wmi.c b/drivers/platform/x86/toshiba-wmi.c index feac4576b837..2df07ee8f3c3 100644 --- a/drivers/platform/x86/toshiba-wmi.c +++ b/drivers/platform/x86/toshiba-wmi.c @@ -24,14 +24,15 @@ #include #include #include +#include MODULE_AUTHOR("Azael Avalos"); MODULE_DESCRIPTION("Toshiba WMI Hotkey Driver"); MODULE_LICENSE("GPL"); -#define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100" +#define WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100" -MODULE_ALIAS("wmi:"TOSHIBA_WMI_EVENT_GUID); +MODULE_ALIAS("wmi:"WMI_EVENT_GUID); static struct input_dev *toshiba_wmi_input_dev; @@ -63,6 +64,16 @@ static void toshiba_wmi_notify(u32 value, void *context) kfree(response.pointer); } +static struct dmi_system_id toshiba_wmi_dmi_table[] __initdata = { + { + .ident = "Toshiba laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + }, + }, + {} +}; + static int __init toshiba_wmi_input_setup(void) { acpi_status status; @@ -81,7 +92,7 @@ static int __init toshiba_wmi_input_setup(void) if (err) goto err_free_dev; - status = wmi_install_notify_handler(TOSHIBA_WMI_EVENT_GUID, + status = wmi_install_notify_handler(WMI_EVENT_GUID, toshiba_wmi_notify, NULL); if (ACPI_FAILURE(status)) { err = -EIO; @@ -95,7 +106,7 @@ static int __init toshiba_wmi_input_setup(void) return 0; err_remove_notifier: - wmi_remove_notify_handler(TOSHIBA_WMI_EVENT_GUID); + wmi_remove_notify_handler(WMI_EVENT_GUID); err_free_keymap: sparse_keymap_free(toshiba_wmi_input_dev); err_free_dev: @@ -105,7 +116,7 @@ static int __init toshiba_wmi_input_setup(void) static void toshiba_wmi_input_destroy(void) { - wmi_remove_notify_handler(TOSHIBA_WMI_EVENT_GUID); + wmi_remove_notify_handler(WMI_EVENT_GUID); sparse_keymap_free(toshiba_wmi_input_dev); input_unregister_device(toshiba_wmi_input_dev); } @@ -114,7 +125,8 @@ static int __init toshiba_wmi_init(void) { int ret; - if (!wmi_has_guid(TOSHIBA_WMI_EVENT_GUID)) + if (!wmi_has_guid(WMI_EVENT_GUID) || + !dmi_check_system(toshiba_wmi_dmi_table)) return -ENODEV; ret = toshiba_wmi_input_setup(); @@ -130,7 +142,7 @@ static int __init toshiba_wmi_init(void) static void __exit toshiba_wmi_exit(void) { - if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID)) + if (wmi_has_guid(WMI_EVENT_GUID)) toshiba_wmi_input_destroy(); } From b77428b12b55437b28deae738d9ce8b2e0663b55 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Mon, 24 Oct 2016 14:21:18 +1100 Subject: [PATCH 013/224] xfs: defer should abort intent items if the trans roll fails If the deferred ops transaction roll fails, we need to abort the intent items if we haven't already logged a done item for it, regardless of whether or not the deferred ops has had a transaction committed. Dave found this while running generic/388. Move the tracepoint to make it easier to track object lifetimes. Reported-by: Dave Chinner Signed-off-by: Darrick J. Wong Reviewed-by: Dave Chinner Signed-off-by: Dave Chinner --- fs/xfs/libxfs/xfs_defer.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/fs/xfs/libxfs/xfs_defer.c b/fs/xfs/libxfs/xfs_defer.c index 613c5cf19436..5c2929f94bd3 100644 --- a/fs/xfs/libxfs/xfs_defer.c +++ b/fs/xfs/libxfs/xfs_defer.c @@ -199,9 +199,9 @@ xfs_defer_intake_work( struct xfs_defer_pending *dfp; list_for_each_entry(dfp, &dop->dop_intake, dfp_list) { - trace_xfs_defer_intake_work(tp->t_mountp, dfp); dfp->dfp_intent = dfp->dfp_type->create_intent(tp, dfp->dfp_count); + trace_xfs_defer_intake_work(tp->t_mountp, dfp); list_sort(tp->t_mountp, &dfp->dfp_work, dfp->dfp_type->diff_items); list_for_each(li, &dfp->dfp_work) @@ -221,21 +221,14 @@ xfs_defer_trans_abort( struct xfs_defer_pending *dfp; trace_xfs_defer_trans_abort(tp->t_mountp, dop); - /* - * If the transaction was committed, drop the intent reference - * since we're bailing out of here. The other reference is - * dropped when the intent hits the AIL. If the transaction - * was not committed, the intent is freed by the intent item - * unlock handler on abort. - */ - if (!dop->dop_committed) - return; - /* Abort intent items. */ + /* Abort intent items that don't have a done item. */ list_for_each_entry(dfp, &dop->dop_pending, dfp_list) { trace_xfs_defer_pending_abort(tp->t_mountp, dfp); - if (!dfp->dfp_done) + if (dfp->dfp_intent && !dfp->dfp_done) { dfp->dfp_type->abort_intent(dfp->dfp_intent); + dfp->dfp_intent = NULL; + } } /* Shut down FS. */ From 38d8ed65092ed22f52a95f397855cace0260e110 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sun, 23 Oct 2016 21:56:08 +0100 Subject: [PATCH 014/224] hwmon: (core) fix resource leak on devm_kcalloc failure If dev_kcalloc fails to allocate hw_dev->groups then the current exit path is a direct return, causing a leak of resources such as hwdev and ida is not removed. Fix this by exiting via the free_hwmon exit path that performs the necessary resource cleanup. Signed-off-by: Colin Ian King Signed-off-by: Guenter Roeck --- drivers/hwmon/hwmon.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index adae6848ffb2..a74c075a30ec 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -536,8 +536,10 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata, hwdev->groups = devm_kcalloc(dev, ngroups, sizeof(*groups), GFP_KERNEL); - if (!hwdev->groups) - return ERR_PTR(-ENOMEM); + if (!hwdev->groups) { + err = -ENOMEM; + goto free_hwmon; + } attrs = __hwmon_create_attrs(dev, drvdata, chip); if (IS_ERR(attrs)) { From f515c3834a4adf8b33f0e7215d434410b1687164 Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Mon, 24 Oct 2016 18:32:18 +0800 Subject: [PATCH 015/224] ASoC: rt298: fix jack type detect error rt298_jack_detect may be called before card is instantiated. And snd_soc_dapm_force_enable_pin will not work in that case. So, update bit manually by regmap_update_bits. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- sound/soc/codecs/rt298.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/rt298.c b/sound/soc/codecs/rt298.c index 55558643166f..2db8179047ae 100644 --- a/sound/soc/codecs/rt298.c +++ b/sound/soc/codecs/rt298.c @@ -249,6 +249,11 @@ static int rt298_jack_detect(struct rt298_priv *rt298, bool *hp, bool *mic) snd_soc_dapm_force_enable_pin(dapm, "LDO1"); snd_soc_dapm_sync(dapm); + regmap_update_bits(rt298->regmap, + RT298_POWER_CTRL1, 0x1001, 0); + regmap_update_bits(rt298->regmap, + RT298_POWER_CTRL2, 0x4, 0x4); + regmap_write(rt298->regmap, RT298_SET_MIC1, 0x24); msleep(50); From 4690481060f3c6b557b01f18319c6382f0fd63ab Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 23 Oct 2016 11:41:09 +0000 Subject: [PATCH 016/224] ASoC: Intel: Atom: add terminate entry for dmi_system_id tables Make sure dmi_system_id tables are NULL terminated. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- sound/soc/intel/atom/sst/sst_acpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index 4d3184971227..748a0f68fc6c 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -343,6 +343,7 @@ static const struct dmi_system_id cht_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"), }, }, + { } }; From 86a6c211d676add579a75b7e172a72bb3e2c21f8 Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Wed, 15 Jun 2016 15:02:55 -0400 Subject: [PATCH 017/224] NFS: Trim extra slash in v4 nfs_path A NFSv4 mount of a subdirectory will show an extra slash (as in 'server://path') in proc's mountinfo which will not match the device name and path. This can cause problems for programs searching for the mount. Fix this by checking for a leading slash in the dentry path, if so trim away any trailing slashes in the device name. Signed-off-by: Benjamin Coddington Signed-off-by: Anna Schumaker --- fs/nfs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index c8162c660c44..5551e8ef67fd 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -98,7 +98,7 @@ char *nfs_path(char **p, struct dentry *dentry, char *buffer, ssize_t buflen, return end; } namelen = strlen(base); - if (flags & NFS_PATH_CANONICAL) { + if (*end == '/') { /* Strip off excess slashes in base string */ while (namelen > 0 && base[namelen - 1] == '/') namelen--; From 6d13f62d931ba638e54ba56f3a7dd3080ffb485a Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Thu, 20 Oct 2016 12:26:16 +0200 Subject: [PATCH 018/224] ASoC: Intel: Skylake: Always acquire runtime pm ref on unload skl_probe() releases a runtime pm ref unconditionally wheras skl_remove() acquires one only if the device is wakeup capable. Thus if the device is not wakeup capable, unloading and reloading the module will result in the refcount being decreased below 0. Fix it. Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver") Signed-off-by: Lukas Wunner Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index e3e764167765..7b7a380b1245 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -785,8 +785,7 @@ static void skl_remove(struct pci_dev *pci) release_firmware(skl->tplg); - if (pci_dev_run_wake(pci)) - pm_runtime_get_noresume(&pci->dev); + pm_runtime_get_noresume(&pci->dev); /* codec removal, invoke bus_device_remove */ snd_hdac_ext_bus_device_remove(ebus); From 5229f1f4a4585f503a0683575bf38d9a1d2c1982 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 18 Oct 2016 17:18:58 +0200 Subject: [PATCH 019/224] ASoC: PXA: Brownstone needs I2C I rand into a new build error with SND_MMP_SOC_BROWNSTONE: warning: (SND_MMP_SOC_BROWNSTONE && SND_SOC_SAMSUNG_SMDK_WM8994 && SND_SOC_SMDK_WM8994_PCM && SND_SOC_LITTLEMILL) selects MFD_WM8994 which has unmet direct dependencies (HAS_IOMEM && I2C) drivers/mfd/wm8994-core.c:688:1: error: data definition has no type or storage class [-Werror] drivers/mfd/wm8994-core.c:688:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] I don't see why this never showed up before, as the dependency seems to have been missing since the symbol was first introduced several years ago. This adds a dependency like the other drivers have. Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown --- sound/soc/pxa/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index f2bf8661dd21..823b5a236d8d 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -208,7 +208,7 @@ config SND_PXA2XX_SOC_IMOTE2 config SND_MMP_SOC_BROWNSTONE tristate "SoC Audio support for Marvell Brownstone" - depends on SND_MMP_SOC && MACH_BROWNSTONE + depends on SND_MMP_SOC && MACH_BROWNSTONE && I2C select SND_MMP_SOC_SSPA select MFD_WM8994 select SND_SOC_WM8994 From 68a564006a21ae59c7c51b4359e2e8efa42ae4af Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 18 Oct 2016 00:05:35 +0200 Subject: [PATCH 020/224] NFSv4.1: work around -Wmaybe-uninitialized warning A bugfix introduced a harmless gcc warning in nfs4_slot_seqid_in_use if we enable -Wmaybe-uninitialized again: fs/nfs/nfs4session.c:203:54: error: 'cur_seq' may be used uninitialized in this function [-Werror=maybe-uninitialized] gcc is not smart enough to conclude that the IS_ERR/PTR_ERR pair results in a nonzero return value here. Using PTR_ERR_OR_ZERO() instead makes this clear to the compiler. The warning originally did not appear in v4.8 as it was globally disabled, but the bugfix that introduced the warning got backported to stable kernels which again enable it, and this is now the only warning in the v4.7 builds. Fixes: e09c978aae5b ("NFSv4.1: Fix Oopsable condition in server callback races") Signed-off-by: Arnd Bergmann Cc: Trond Myklebust Signed-off-by: Anna Schumaker --- fs/nfs/nfs4session.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index b62973045a3e..150c5a1879bf 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -178,12 +178,14 @@ static int nfs4_slot_get_seqid(struct nfs4_slot_table *tbl, u32 slotid, __must_hold(&tbl->slot_tbl_lock) { struct nfs4_slot *slot; + int ret; slot = nfs4_lookup_slot(tbl, slotid); - if (IS_ERR(slot)) - return PTR_ERR(slot); - *seq_nr = slot->seq_nr; - return 0; + ret = PTR_ERR_OR_ZERO(slot); + if (!ret) + *seq_nr = slot->seq_nr; + + return ret; } /* From 34eee70a7b82b09dbda4cb453e0e21d460dae226 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 24 Oct 2016 17:22:01 +0200 Subject: [PATCH 021/224] staging: iio: ad5933: avoid uninitialized variable in error case The ad5933_i2c_read function returns an error code to indicate whether it could read data or not. However ad5933_work() ignores this return code and just accesses the data unconditionally, which gets detected by gcc as a possible bug: drivers/staging/iio/impedance-analyzer/ad5933.c: In function 'ad5933_work': drivers/staging/iio/impedance-analyzer/ad5933.c:649:16: warning: 'status' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds minimal error handling so we only evaluate the data if it was correctly read. Link: https://patchwork.kernel.org/patch/8110281/ Signed-off-by: Arnd Bergmann Acked-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron --- drivers/staging/iio/impedance-analyzer/ad5933.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 5eecf1cb1028..3892a7470410 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -655,6 +655,7 @@ static void ad5933_work(struct work_struct *work) __be16 buf[2]; int val[2]; unsigned char status; + int ret; mutex_lock(&indio_dev->mlock); if (st->state == AD5933_CTRL_INIT_START_FREQ) { @@ -662,19 +663,22 @@ static void ad5933_work(struct work_struct *work) ad5933_cmd(st, AD5933_CTRL_START_SWEEP); st->state = AD5933_CTRL_START_SWEEP; schedule_delayed_work(&st->work, st->poll_time_jiffies); - mutex_unlock(&indio_dev->mlock); - return; + goto out; } - ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status); + ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status); + if (ret) + goto out; if (status & AD5933_STAT_DATA_VALID) { int scan_count = bitmap_weight(indio_dev->active_scan_mask, indio_dev->masklength); - ad5933_i2c_read(st->client, + ret = ad5933_i2c_read(st->client, test_bit(1, indio_dev->active_scan_mask) ? AD5933_REG_REAL_DATA : AD5933_REG_IMAG_DATA, scan_count * 2, (u8 *)buf); + if (ret) + goto out; if (scan_count == 2) { val[0] = be16_to_cpu(buf[0]); @@ -686,8 +690,7 @@ static void ad5933_work(struct work_struct *work) } else { /* no data available - try again later */ schedule_delayed_work(&st->work, st->poll_time_jiffies); - mutex_unlock(&indio_dev->mlock); - return; + goto out; } if (status & AD5933_STAT_SWEEP_DONE) { @@ -700,7 +703,7 @@ static void ad5933_work(struct work_struct *work) ad5933_cmd(st, AD5933_CTRL_INC_FREQ); schedule_delayed_work(&st->work, st->poll_time_jiffies); } - +out: mutex_unlock(&indio_dev->mlock); } From 1e6d304431958929b601b013687b73293ba27b88 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Mon, 24 Oct 2016 16:42:52 +0200 Subject: [PATCH 022/224] ASoC: sti: fix channel status update after playback start If 'IEC958 Playback Default' control is updated during playback, Channel status needs to be set according to the runtime structure. Signed-off-by: Arnaud Pouliquen Signed-off-by: Mark Brown --- sound/soc/sti/uniperif_player.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/soc/sti/uniperif_player.c b/sound/soc/sti/uniperif_player.c index 1bc8ebc2528e..ad54d4cf58ad 100644 --- a/sound/soc/sti/uniperif_player.c +++ b/sound/soc/sti/uniperif_player.c @@ -614,7 +614,11 @@ static int uni_player_ctl_iec958_put(struct snd_kcontrol *kcontrol, iec958->status[3] = ucontrol->value.iec958.status[3]; mutex_unlock(&player->ctrl_lock); - uni_player_set_channel_status(player, NULL); + if (player->substream && player->substream->runtime) + uni_player_set_channel_status(player, + player->substream->runtime); + else + uni_player_set_channel_status(player, NULL); return 0; } From 7e235deb69dc7b1c4b5e1ac63a3157ef98ceeff3 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Mon, 24 Oct 2016 16:42:57 +0200 Subject: [PATCH 023/224] ASoC: sti-sas: enable fast io for regmap Some registers accesses are done in atomic context. Enable fast io to use spinlock instead of mutex to protect access. Signed-off-by: Arnaud Pouliquen Signed-off-by: Mark Brown --- sound/soc/codecs/sti-sas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/sti-sas.c b/sound/soc/codecs/sti-sas.c index 7b31ee9b82bc..d6e00c77edcd 100644 --- a/sound/soc/codecs/sti-sas.c +++ b/sound/soc/codecs/sti-sas.c @@ -424,7 +424,7 @@ static const struct snd_soc_dai_ops stih407_dac_ops = { static const struct regmap_config stih407_sas_regmap = { .reg_bits = 32, .val_bits = 32, - + .fast_io = true, .max_register = STIH407_AUDIO_DAC_CTRL, .reg_defaults = stih407_sas_reg_defaults, .num_reg_defaults = ARRAY_SIZE(stih407_sas_reg_defaults), From 5c4a9129b81027eca12aeaf2fa9defb45150f533 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 26 Oct 2016 08:12:20 +0200 Subject: [PATCH 024/224] clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT The Exynos PMU node is an interrupt, clock and PMU (Power Management Unit) controller, and these functionalities are supported by different drivers that matches the same compatible strings. Since commit 989eafd0b609 ("clk: core: Avoid double initialization of clocks") the OF core flags clock controllers registered with the CLK_OF_DECLARE() macro as OF_POPULATED, so platform devices with the same compatible string will not be registered. This prevents the PMU platform device to be created, so the Exynos PMU driver is never probed. This breaks (among other things) Suspend-to-RAM. Fix this by changing CLKOUT driver initialization method to CLK_OF_DECLARE_DRIVER(), which doesn't clear the OF_POPULATED flag, so later a platform device is created and the Exynos PMU platform driver can be be probed properly. Fixes: 989eafd0b609 ("clk: core: Avoid double initialization of clocks") Signed-off-by: Marek Szyprowski Reviewed-by: Javier Martinez Canillas Reviewed-by: Chanwoo Choi Signed-off-by: Stephen Boyd --- drivers/clk/samsung/clk-exynos-clkout.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos-clkout.c b/drivers/clk/samsung/clk-exynos-clkout.c index 96fab6cfb202..6c6afb87b4ce 100644 --- a/drivers/clk/samsung/clk-exynos-clkout.c +++ b/drivers/clk/samsung/clk-exynos-clkout.c @@ -132,28 +132,34 @@ static void __init exynos_clkout_init(struct device_node *node, u32 mux_mask) pr_err("%s: failed to register clkout clock\n", __func__); } +/* + * We use CLK_OF_DECLARE_DRIVER initialization method to avoid setting + * the OF_POPULATED flag on the pmu device tree node, so later the + * Exynos PMU platform device can be properly probed with PMU driver. + */ + static void __init exynos4_clkout_init(struct device_node *node) { exynos_clkout_init(node, EXYNOS4_CLKOUT_MUX_MASK); } -CLK_OF_DECLARE(exynos4210_clkout, "samsung,exynos4210-pmu", +CLK_OF_DECLARE_DRIVER(exynos4210_clkout, "samsung,exynos4210-pmu", exynos4_clkout_init); -CLK_OF_DECLARE(exynos4212_clkout, "samsung,exynos4212-pmu", +CLK_OF_DECLARE_DRIVER(exynos4212_clkout, "samsung,exynos4212-pmu", exynos4_clkout_init); -CLK_OF_DECLARE(exynos4412_clkout, "samsung,exynos4412-pmu", +CLK_OF_DECLARE_DRIVER(exynos4412_clkout, "samsung,exynos4412-pmu", exynos4_clkout_init); -CLK_OF_DECLARE(exynos3250_clkout, "samsung,exynos3250-pmu", +CLK_OF_DECLARE_DRIVER(exynos3250_clkout, "samsung,exynos3250-pmu", exynos4_clkout_init); static void __init exynos5_clkout_init(struct device_node *node) { exynos_clkout_init(node, EXYNOS5_CLKOUT_MUX_MASK); } -CLK_OF_DECLARE(exynos5250_clkout, "samsung,exynos5250-pmu", +CLK_OF_DECLARE_DRIVER(exynos5250_clkout, "samsung,exynos5250-pmu", exynos5_clkout_init); -CLK_OF_DECLARE(exynos5410_clkout, "samsung,exynos5410-pmu", +CLK_OF_DECLARE_DRIVER(exynos5410_clkout, "samsung,exynos5410-pmu", exynos5_clkout_init); -CLK_OF_DECLARE(exynos5420_clkout, "samsung,exynos5420-pmu", +CLK_OF_DECLARE_DRIVER(exynos5420_clkout, "samsung,exynos5420-pmu", exynos5_clkout_init); -CLK_OF_DECLARE(exynos5433_clkout, "samsung,exynos5433-pmu", +CLK_OF_DECLARE_DRIVER(exynos5433_clkout, "samsung,exynos5433-pmu", exynos5_clkout_init); From 237d6e6884136923b6bd26d5141ebe1d065960c9 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Tue, 25 Oct 2016 16:24:28 +0200 Subject: [PATCH 025/224] s390/hypfs: Use get_free_page() instead of kmalloc to ensure page alignment Since commit d86bd1bece6f ("mm/slub: support left redzone") it is no longer guaranteed that kmalloc(PAGE_SIZE) returns page aligned memory. After the above commit we get an error for diag224 because aligned memory is required. This leads to the following user visible error: # mount none -t s390_hypfs /sys/hypervisor/ mount: unknown filesystem type 's390_hypfs' # dmesg | grep hypfs hypfs.cccfb8: The hardware system does not provide all functions required by hypfs hypfs.7a79f0: Initialization of hypfs failed with rc=-61 Fix this problem and use get_free_page() instead of kmalloc() to get correctly aligned memory. Cc: stable@vger.kernel.org # v3.6+ Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/hypfs/hypfs_diag.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c index 28f03ca60100..794bebb43d23 100644 --- a/arch/s390/hypfs/hypfs_diag.c +++ b/arch/s390/hypfs/hypfs_diag.c @@ -363,11 +363,11 @@ static void *diag204_store(void) static int diag224_get_name_table(void) { /* memory must be below 2GB */ - diag224_cpu_names = kmalloc(PAGE_SIZE, GFP_KERNEL | GFP_DMA); + diag224_cpu_names = (char *) __get_free_page(GFP_KERNEL | GFP_DMA); if (!diag224_cpu_names) return -ENOMEM; if (diag224(diag224_cpu_names)) { - kfree(diag224_cpu_names); + free_page((unsigned long) diag224_cpu_names); return -EOPNOTSUPP; } EBCASC(diag224_cpu_names + 16, (*diag224_cpu_names + 1) * 16); @@ -376,7 +376,7 @@ static int diag224_get_name_table(void) static void diag224_delete_name_table(void) { - kfree(diag224_cpu_names); + free_page((unsigned long) diag224_cpu_names); } static int diag224_idx2name(int index, char *name) From 7a5857c3c282c12a8bd0cfd2dd4a17a9252c2b4d Mon Sep 17 00:00:00 2001 From: "Sodhi, VunnyX" Date: Fri, 28 Oct 2016 16:59:41 +0530 Subject: [PATCH 026/224] ASoC: Intel: Skylake: Fix to turn off hdmi power on probe failure HDMI codec is required to be powered up before controller initialization for successful enumeration of codec. If the probe fails it needs to be powered off to balance the power state of HDMI codec. This fix balances the reference count in the error path before turning off the codec. Reported-by: Takashi Sakamoto Signed-off-by: Sodhi, VunnyX Signed-off-by: Subhransu S. Prusty Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 7b7a380b1245..3fc30cbe83c1 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -674,7 +674,7 @@ static int skl_probe(struct pci_dev *pci, if (skl->nhlt == NULL) { err = -ENODEV; - goto out_free; + goto out_display_power_off; } skl_nhlt_update_topology_bin(skl); @@ -746,6 +746,9 @@ static int skl_probe(struct pci_dev *pci, skl_machine_device_unregister(skl); out_nhlt_free: skl_nhlt_free(skl->nhlt); +out_display_power_off: + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) + snd_hdac_display_power(bus, false); out_free: skl->init_failed = 1; skl_free(ebus); From d64b5bf5b10ad95fd4a2684e1fc39eb7b00d9d0c Mon Sep 17 00:00:00 2001 From: Stephen Barber Date: Thu, 27 Oct 2016 18:02:27 -0700 Subject: [PATCH 027/224] ASoC: da7219: Connect output enable register to DAIOUT da7219 output (for headset capture) should be set to high-impedance when not in use, since it will otherwise interfere with output from other codecs attached to the same DAI. Signed-off-by: Stephen Barber Acked-by: Adam Thomson Signed-off-by: Mark Brown --- sound/soc/codecs/da7219.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c index 1152aa5e7c39..cf37936bfe3a 100644 --- a/sound/soc/codecs/da7219.c +++ b/sound/soc/codecs/da7219.c @@ -880,7 +880,8 @@ static const struct snd_soc_dapm_widget da7219_dapm_widgets[] = { SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), /* DAI */ - SND_SOC_DAPM_AIF_OUT("DAIOUT", "Capture", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("DAIOUT", "Capture", 0, DA7219_DAI_TDM_CTRL, + DA7219_DAI_OE_SHIFT, DA7219_NO_INVERT), SND_SOC_DAPM_AIF_IN("DAIIN", "Playback", 0, SND_SOC_NOPM, 0, 0), /* Output Muxes */ From 73f5dfc68316bef2ab7062ecdefd4b0ca941b4c1 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 27 Oct 2016 12:34:02 +0200 Subject: [PATCH 028/224] ASoC: samsung: get access to DMA engine early to defer probe properly ASoC Samsung sub-drivers tried to get access to their DMA engine controllers as a last step in driver probe. If a DMA engine was not available yet, samsung_asoc_dma_platform_register() function ended in -EPROBE_DEFER, but the driver already registered its component to ASoC core. This patch moves samsung_asoc_dma_platform_register() call before registering any components, to the common place, where driver was gathering all needed resources. In case of Samsung Exynos i2s driver the issue was even worse. The driver managed already to register its secondary DAI platform device before even getting the DMA engine access. That together with -EPROBE_DEFER error code from samsung_i2s_probe() immediately triggered another round of deferred probe retry and in turn endless loop of driver probing. This patch fixes broken boot on Odroid XU3 and other Exynos5422-based boards. Signed-off-by: Marek Szyprowski Reviewed-by: Javier Martinez Canillas Reviewed-by: Sylwester Nawrocki Signed-off-by: Mark Brown --- sound/soc/samsung/ac97.c | 10 +++++----- sound/soc/samsung/i2s.c | 19 ++++++++++--------- sound/soc/samsung/pcm.c | 21 +++++++++++---------- sound/soc/samsung/s3c2412-i2s.c | 18 +++++++++--------- sound/soc/samsung/s3c24xx-i2s.c | 16 ++++++++-------- sound/soc/samsung/spdif.c | 14 +++++++------- 6 files changed, 50 insertions(+), 48 deletions(-) diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c index 97d6700b1009..cbc0023c2bc8 100644 --- a/sound/soc/samsung/ac97.c +++ b/sound/soc/samsung/ac97.c @@ -383,11 +383,6 @@ static int s3c_ac97_probe(struct platform_device *pdev) goto err4; } - ret = devm_snd_soc_register_component(&pdev->dev, &s3c_ac97_component, - s3c_ac97_dai, ARRAY_SIZE(s3c_ac97_dai)); - if (ret) - goto err5; - ret = samsung_asoc_dma_platform_register(&pdev->dev, ac97_pdata->dma_filter, NULL, NULL); @@ -396,6 +391,11 @@ static int s3c_ac97_probe(struct platform_device *pdev) goto err5; } + ret = devm_snd_soc_register_component(&pdev->dev, &s3c_ac97_component, + s3c_ac97_dai, ARRAY_SIZE(s3c_ac97_dai)); + if (ret) + goto err5; + return 0; err5: free_irq(irq_res->start, NULL); diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index 7e32cf4581f8..7825bff45ae3 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -1237,14 +1237,14 @@ static int samsung_i2s_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Unable to get drvdata\n"); return -EFAULT; } - ret = devm_snd_soc_register_component(&sec_dai->pdev->dev, - &samsung_i2s_component, - &sec_dai->i2s_dai_drv, 1); + ret = samsung_asoc_dma_platform_register(&pdev->dev, + sec_dai->filter, "tx-sec", NULL); if (ret != 0) return ret; - return samsung_asoc_dma_platform_register(&pdev->dev, - sec_dai->filter, "tx-sec", NULL); + return devm_snd_soc_register_component(&sec_dai->pdev->dev, + &samsung_i2s_component, + &sec_dai->i2s_dai_drv, 1); } pri_dai = i2s_alloc_dai(pdev, false); @@ -1314,6 +1314,11 @@ static int samsung_i2s_probe(struct platform_device *pdev) if (quirks & QUIRK_PRI_6CHAN) pri_dai->i2s_dai_drv.playback.channels_max = 6; + ret = samsung_asoc_dma_platform_register(&pdev->dev, pri_dai->filter, + NULL, NULL); + if (ret < 0) + goto err_disable_clk; + if (quirks & QUIRK_SEC_DAI) { sec_dai = i2s_alloc_dai(pdev, true); if (!sec_dai) { @@ -1353,10 +1358,6 @@ static int samsung_i2s_probe(struct platform_device *pdev) if (ret < 0) goto err_free_dai; - ret = samsung_asoc_dma_platform_register(&pdev->dev, pri_dai->filter, - NULL, NULL); - if (ret < 0) - goto err_free_dai; pm_runtime_enable(&pdev->dev); diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c index 43e367a9acc3..c484985812ed 100644 --- a/sound/soc/samsung/pcm.c +++ b/sound/soc/samsung/pcm.c @@ -565,15 +565,6 @@ static int s3c_pcm_dev_probe(struct platform_device *pdev) pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id]; pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id]; - pm_runtime_enable(&pdev->dev); - - ret = devm_snd_soc_register_component(&pdev->dev, &s3c_pcm_component, - &s3c_pcm_dai[pdev->id], 1); - if (ret != 0) { - dev_err(&pdev->dev, "failed to get register DAI: %d\n", ret); - goto err5; - } - ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, NULL, NULL); if (ret) { @@ -581,8 +572,18 @@ static int s3c_pcm_dev_probe(struct platform_device *pdev) goto err5; } - return 0; + pm_runtime_enable(&pdev->dev); + ret = devm_snd_soc_register_component(&pdev->dev, &s3c_pcm_component, + &s3c_pcm_dai[pdev->id], 1); + if (ret != 0) { + dev_err(&pdev->dev, "failed to get register DAI: %d\n", ret); + goto err6; + } + + return 0; +err6: + pm_runtime_disable(&pdev->dev); err5: clk_disable_unprepare(pcm->pclk); err4: diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c index 3e89fbc0c51d..0a4718207e6e 100644 --- a/sound/soc/samsung/s3c2412-i2s.c +++ b/sound/soc/samsung/s3c2412-i2s.c @@ -168,19 +168,19 @@ static int s3c2412_iis_dev_probe(struct platform_device *pdev) s3c2412_i2s_pcm_stereo_in.addr = res->start + S3C2412_IISRXD; s3c2412_i2s_pcm_stereo_in.filter_data = pdata->dma_capture; - ret = s3c_i2sv2_register_component(&pdev->dev, -1, - &s3c2412_i2s_component, - &s3c2412_i2s_dai); - if (ret) { - pr_err("failed to register the dai\n"); - return ret; - } - ret = samsung_asoc_dma_platform_register(&pdev->dev, pdata->dma_filter, NULL, NULL); - if (ret) + if (ret) { pr_err("failed to register the DMA: %d\n", ret); + return ret; + } + + ret = s3c_i2sv2_register_component(&pdev->dev, -1, + &s3c2412_i2s_component, + &s3c2412_i2s_dai); + if (ret) + pr_err("failed to register the dai\n"); return ret; } diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c index c78a936a3099..9052f6a7073e 100644 --- a/sound/soc/samsung/s3c24xx-i2s.c +++ b/sound/soc/samsung/s3c24xx-i2s.c @@ -474,18 +474,18 @@ static int s3c24xx_iis_dev_probe(struct platform_device *pdev) s3c24xx_i2s_pcm_stereo_in.addr = res->start + S3C2410_IISFIFO; s3c24xx_i2s_pcm_stereo_in.filter_data = pdata->dma_capture; - ret = devm_snd_soc_register_component(&pdev->dev, - &s3c24xx_i2s_component, &s3c24xx_i2s_dai, 1); - if (ret) { - pr_err("failed to register the dai\n"); - return ret; - } - ret = samsung_asoc_dma_platform_register(&pdev->dev, pdata->dma_filter, NULL, NULL); - if (ret) + if (ret) { pr_err("failed to register the dma: %d\n", ret); + return ret; + } + + ret = devm_snd_soc_register_component(&pdev->dev, + &s3c24xx_i2s_component, &s3c24xx_i2s_dai, 1); + if (ret) + pr_err("failed to register the dai\n"); return ret; } diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c index 26c1fbed4d35..704b7b12bf8b 100644 --- a/sound/soc/samsung/spdif.c +++ b/sound/soc/samsung/spdif.c @@ -416,6 +416,13 @@ static int spdif_probe(struct platform_device *pdev) goto err3; } + ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, + NULL, NULL); + if (ret) { + dev_err(&pdev->dev, "failed to register DMA: %d\n", ret); + goto err4; + } + dev_set_drvdata(&pdev->dev, spdif); ret = devm_snd_soc_register_component(&pdev->dev, @@ -435,13 +442,6 @@ static int spdif_probe(struct platform_device *pdev) spdif->dma_playback = &spdif_stereo_out; - ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, - NULL, NULL); - if (ret) { - dev_err(&pdev->dev, "failed to register DMA: %d\n", ret); - goto err4; - } - return 0; err4: iounmap(spdif->regs); From 340327a62c4a145e098fd6c1116f12062eeec707 Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Fri, 28 Oct 2016 09:18:24 +0100 Subject: [PATCH 029/224] ASoC: hdmi-codec: Fix hdmi_of_xlate_dai_name when #sound-dai-cells = <0> If a DAI specifies "#sound-dai-cells = <0>" in device-tree then hdmi_of_xlate_dai_name() will be called with zero args, which it isn't implemented to cope with. The resulting use of an uninitialised variable for the id will usually result in an error like: asoc-simple-card sound: parse error -11 asoc-simple-card: probe of sound failed with error -11 Fix this by using and id of zero if no arg is provided. Fixes: 9731f82d6016 ("ASoC: hdmi-codec: enable multi probe for same device") Signed-off-by: Jon Medhurst Signed-off-by: Mark Brown --- sound/soc/codecs/hdmi-codec.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c index b904492d7744..90b5948e0ff3 100644 --- a/sound/soc/codecs/hdmi-codec.c +++ b/sound/soc/codecs/hdmi-codec.c @@ -364,7 +364,12 @@ static int hdmi_of_xlate_dai_name(struct snd_soc_component *component, struct of_phandle_args *args, const char **dai_name) { - int id = args->args[0]; + int id; + + if (args->args_count) + id = args->args[0]; + else + id = 0; if (id < ARRAY_SIZE(hdmi_dai_name)) { *dai_name = hdmi_dai_name[id]; From 06b113e9f28f8657715919087a3f54b77d1634ed Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Fri, 28 Oct 2016 09:59:38 -0700 Subject: [PATCH 030/224] clk: xgene: Don't call __pa on ioremaped address ioremaped addresses are not linearly mapped so the physical address can not be figured out via __pa. More generally, there is no guarantee that backing value of an ioremapped address is a physical address at all. The value here is only used for debugging so just drop the call to __pa on the ioremapped address. Fixes: 6ae5fd381251 ("clk: xgene: Silence sparse warnings") Signed-off-by: Laura Abbott Acked-by: Loc Ho Signed-off-by: Stephen Boyd --- drivers/clk/clk-xgene.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/clk/clk-xgene.c b/drivers/clk/clk-xgene.c index 5daddf5ecc4b..bc37030e38ba 100644 --- a/drivers/clk/clk-xgene.c +++ b/drivers/clk/clk-xgene.c @@ -463,22 +463,20 @@ static int xgene_clk_enable(struct clk_hw *hw) struct xgene_clk *pclk = to_xgene_clk(hw); unsigned long flags = 0; u32 data; - phys_addr_t reg; if (pclk->lock) spin_lock_irqsave(pclk->lock, flags); if (pclk->param.csr_reg != NULL) { pr_debug("%s clock enabled\n", clk_hw_get_name(hw)); - reg = __pa(pclk->param.csr_reg); /* First enable the clock */ data = xgene_clk_read(pclk->param.csr_reg + pclk->param.reg_clk_offset); data |= pclk->param.reg_clk_mask; xgene_clk_write(data, pclk->param.csr_reg + pclk->param.reg_clk_offset); - pr_debug("%s clock PADDR base %pa clk offset 0x%08X mask 0x%08X value 0x%08X\n", - clk_hw_get_name(hw), ®, + pr_debug("%s clk offset 0x%08X mask 0x%08X value 0x%08X\n", + clk_hw_get_name(hw), pclk->param.reg_clk_offset, pclk->param.reg_clk_mask, data); @@ -488,8 +486,8 @@ static int xgene_clk_enable(struct clk_hw *hw) data &= ~pclk->param.reg_csr_mask; xgene_clk_write(data, pclk->param.csr_reg + pclk->param.reg_csr_offset); - pr_debug("%s CSR RESET PADDR base %pa csr offset 0x%08X mask 0x%08X value 0x%08X\n", - clk_hw_get_name(hw), ®, + pr_debug("%s csr offset 0x%08X mask 0x%08X value 0x%08X\n", + clk_hw_get_name(hw), pclk->param.reg_csr_offset, pclk->param.reg_csr_mask, data); } From 646cccb55b26b95b981ea9a63512260d0c21cac3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 26 Oct 2016 16:41:39 -0400 Subject: [PATCH 031/224] drm/amdgpu: add support for new smc firmware on tonga Newer tonga parts require new smc firmware. Reviewed-by: Huang Rui Reviewed-by: Eric Huang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 6 +++++- drivers/gpu/drm/amd/amdgpu/vi.c | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index 7a8bfa34682f..d1267ea1d631 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -798,7 +798,11 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, strcpy(fw_name, "amdgpu/topaz_smc.bin"); break; case CHIP_TONGA: - strcpy(fw_name, "amdgpu/tonga_smc.bin"); + if (((adev->pdev->device == 0x6939) && (adev->pdev->revision == 0xf1)) || + ((adev->pdev->device == 0x6938) && (adev->pdev->revision == 0xf1))) + strcpy(fw_name, "amdgpu/tonga_k_smc.bin"); + else + strcpy(fw_name, "amdgpu/tonga_smc.bin"); break; case CHIP_FIJI: strcpy(fw_name, "amdgpu/fiji_smc.bin"); diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index 7c13090df7c0..12404fc47520 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -81,6 +81,7 @@ MODULE_FIRMWARE("amdgpu/topaz_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_smc.bin"); +MODULE_FIRMWARE("amdgpu/tonga_k_smc.bin"); MODULE_FIRMWARE("amdgpu/fiji_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_smc_sk.bin"); From 3b496626ee8f07919256a4e99cddf42ecd4ba891 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 27 Oct 2016 18:33:00 -0400 Subject: [PATCH 032/224] drm/amdgpu: add support for new smc firmware on iceland Newer iceland parts require new smc firmware. Reviewed-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 7 ++++++- drivers/gpu/drm/amd/amdgpu/vi.c | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index d1267ea1d631..662976292535 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -795,7 +795,12 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, if (!adev->pm.fw) { switch (adev->asic_type) { case CHIP_TOPAZ: - strcpy(fw_name, "amdgpu/topaz_smc.bin"); + if (((adev->pdev->device == 0x6900) && (adev->pdev->revision == 0x81)) || + ((adev->pdev->device == 0x6900) && (adev->pdev->revision == 0x83)) || + ((adev->pdev->device == 0x6907) && (adev->pdev->revision == 0x87))) + strcpy(fw_name, "amdgpu/topaz_k_smc.bin"); + else + strcpy(fw_name, "amdgpu/topaz_smc.bin"); break; case CHIP_TONGA: if (((adev->pdev->device == 0x6939) && (adev->pdev->revision == 0xf1)) || diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index 12404fc47520..f62f1a74f890 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -80,6 +80,7 @@ #include "dce_virtual.h" MODULE_FIRMWARE("amdgpu/topaz_smc.bin"); +MODULE_FIRMWARE("amdgpu/topaz_k_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_k_smc.bin"); MODULE_FIRMWARE("amdgpu/fiji_smc.bin"); From d304286abbbe7ed6228a553a56ba054e900907eb Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 25 Oct 2016 23:07:38 +0200 Subject: [PATCH 033/224] iio: st_sensors: fix scale configuration for h3lis331dl fix scale configuration/parsing for h3lis331dl accel driver when sensitivity is higher than 1(m/s^2)/digit Signed-off-by: Lorenzo Bianconi Fixes: 1e52fefc9b0c ("iio: accel: Add support for the h3lis331dl accelerometer") Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_core.c | 12 ++++++++---- drivers/iio/common/st_sensors/st_sensors_core.c | 8 +++++--- 2 files changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index da3fb069ec5c..ce69048c88e9 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -743,8 +743,8 @@ static int st_accel_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - *val = 0; - *val2 = adata->current_fullscale->gain; + *val = adata->current_fullscale->gain / 1000000; + *val2 = adata->current_fullscale->gain % 1000000; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SAMP_FREQ: *val = adata->odr; @@ -763,9 +763,13 @@ static int st_accel_write_raw(struct iio_dev *indio_dev, int err; switch (mask) { - case IIO_CHAN_INFO_SCALE: - err = st_sensors_set_fullscale_by_gain(indio_dev, val2); + case IIO_CHAN_INFO_SCALE: { + int gain; + + gain = val * 1000000 + val2; + err = st_sensors_set_fullscale_by_gain(indio_dev, gain); break; + } case IIO_CHAN_INFO_SAMP_FREQ: if (val2) return -EINVAL; diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 285a64a589d7..975a1f19f747 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -612,7 +612,7 @@ EXPORT_SYMBOL(st_sensors_sysfs_sampling_frequency_avail); ssize_t st_sensors_sysfs_scale_avail(struct device *dev, struct device_attribute *attr, char *buf) { - int i, len = 0; + int i, len = 0, q, r; struct iio_dev *indio_dev = dev_get_drvdata(dev); struct st_sensor_data *sdata = iio_priv(indio_dev); @@ -621,8 +621,10 @@ ssize_t st_sensors_sysfs_scale_avail(struct device *dev, if (sdata->sensor_settings->fs.fs_avl[i].num == 0) break; - len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", - sdata->sensor_settings->fs.fs_avl[i].gain); + q = sdata->sensor_settings->fs.fs_avl[i].gain / 1000000; + r = sdata->sensor_settings->fs.fs_avl[i].gain % 1000000; + + len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ", q, r); } mutex_unlock(&indio_dev->mlock); buf[len - 1] = '\n'; From 0b944d3a4bba6b25f43aed530f4fa85c04d162a6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 30 Oct 2016 11:42:01 -0500 Subject: [PATCH 034/224] aio: hold an extra file reference over AIO read/write operations Otherwise we might dereference an already freed file and/or inode when aio_complete is called before we return from the read_iter or write_iter method. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/aio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/aio.c b/fs/aio.c index 1157e13a36d6..0aa71d338c04 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1460,6 +1460,7 @@ static ssize_t aio_run_iocb(struct kiocb *req, unsigned opcode, return ret; } + get_file(file); if (rw == WRITE) file_start_write(file); @@ -1467,6 +1468,7 @@ static ssize_t aio_run_iocb(struct kiocb *req, unsigned opcode, if (rw == WRITE) file_end_write(file); + fput(file); kfree(iovec); break; From 723c038475b78edc9327eb952f95f9881cc9d79d Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 30 Oct 2016 11:42:02 -0500 Subject: [PATCH 035/224] fs: remove the never implemented aio_fsync file operation Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- Documentation/filesystems/Locking | 1 - Documentation/filesystems/vfs.txt | 1 - fs/aio.c | 14 -------------- fs/ntfs/dir.c | 2 -- include/linux/fs.h | 1 - 5 files changed, 19 deletions(-) diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 14cdc101d165..1b5f15653b1b 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -447,7 +447,6 @@ prototypes: int (*flush) (struct file *); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, loff_t start, loff_t end, int datasync); - int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*readv) (struct file *, const struct iovec *, unsigned long, diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index d619c8d71966..b5039a00caaf 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -828,7 +828,6 @@ struct file_operations { int (*flush) (struct file *, fl_owner_t id); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, loff_t, loff_t, int datasync); - int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); diff --git a/fs/aio.c b/fs/aio.c index 0aa71d338c04..2a6030af6ba5 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1472,20 +1472,6 @@ static ssize_t aio_run_iocb(struct kiocb *req, unsigned opcode, kfree(iovec); break; - case IOCB_CMD_FDSYNC: - if (!file->f_op->aio_fsync) - return -EINVAL; - - ret = file->f_op->aio_fsync(req, 1); - break; - - case IOCB_CMD_FSYNC: - if (!file->f_op->aio_fsync) - return -EINVAL; - - ret = file->f_op->aio_fsync(req, 0); - break; - default: pr_debug("EINVAL: no operation provided\n"); return -EINVAL; diff --git a/fs/ntfs/dir.c b/fs/ntfs/dir.c index a18613579001..0ee19ecc982d 100644 --- a/fs/ntfs/dir.c +++ b/fs/ntfs/dir.c @@ -1544,8 +1544,6 @@ const struct file_operations ntfs_dir_ops = { .iterate = ntfs_readdir, /* Read directory contents. */ #ifdef NTFS_RW .fsync = ntfs_dir_fsync, /* Sync a directory to disk. */ - /*.aio_fsync = ,*/ /* Sync all outstanding async - i/o operations on a kiocb. */ #endif /* NTFS_RW */ /*.ioctl = ,*/ /* Perform function on the mounted filesystem. */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 16d2b6e874d6..ff7bcd9e8398 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1709,7 +1709,6 @@ struct file_operations { int (*flush) (struct file *, fl_owner_t id); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, loff_t, loff_t, int datasync); - int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); From 89319d31d2d097da8e27fb0e0ae9d532f4f16827 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 30 Oct 2016 11:42:03 -0500 Subject: [PATCH 036/224] fs: remove aio_run_iocb Pass the ABI iocb structure to aio_setup_rw and let it handle the non-vectored I/O case as well. With that and a new helper for the AIO return value handling we can now define new aio_read and aio_write helpers that implement reads and writes in a self-contained way without duplicating too much code. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/aio.c | 188 ++++++++++++++++++++++++++++--------------------------- 1 file changed, 97 insertions(+), 91 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index 2a6030af6ba5..c19755187ca5 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1392,110 +1392,100 @@ SYSCALL_DEFINE1(io_destroy, aio_context_t, ctx) return -EINVAL; } -typedef ssize_t (rw_iter_op)(struct kiocb *, struct iov_iter *); - -static int aio_setup_vectored_rw(int rw, char __user *buf, size_t len, - struct iovec **iovec, - bool compat, - struct iov_iter *iter) +static int aio_setup_rw(int rw, struct iocb *iocb, struct iovec **iovec, + bool vectored, bool compat, struct iov_iter *iter) { + void __user *buf = (void __user *)(uintptr_t)iocb->aio_buf; + size_t len = iocb->aio_nbytes; + + if (!vectored) { + ssize_t ret = import_single_range(rw, buf, len, *iovec, iter); + *iovec = NULL; + return ret; + } #ifdef CONFIG_COMPAT if (compat) - return compat_import_iovec(rw, - (struct compat_iovec __user *)buf, - len, UIO_FASTIOV, iovec, iter); + return compat_import_iovec(rw, buf, len, UIO_FASTIOV, iovec, + iter); #endif - return import_iovec(rw, (struct iovec __user *)buf, - len, UIO_FASTIOV, iovec, iter); + return import_iovec(rw, buf, len, UIO_FASTIOV, iovec, iter); } -/* - * aio_run_iocb: - * Performs the initial checks and io submission. - */ -static ssize_t aio_run_iocb(struct kiocb *req, unsigned opcode, - char __user *buf, size_t len, bool compat) +static inline ssize_t aio_ret(struct kiocb *req, ssize_t ret) { - struct file *file = req->ki_filp; - ssize_t ret; - int rw; - fmode_t mode; - rw_iter_op *iter_op; - struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs; - struct iov_iter iter; - - switch (opcode) { - case IOCB_CMD_PREAD: - case IOCB_CMD_PREADV: - mode = FMODE_READ; - rw = READ; - iter_op = file->f_op->read_iter; - goto rw_common; - - case IOCB_CMD_PWRITE: - case IOCB_CMD_PWRITEV: - mode = FMODE_WRITE; - rw = WRITE; - iter_op = file->f_op->write_iter; - goto rw_common; -rw_common: - if (unlikely(!(file->f_mode & mode))) - return -EBADF; - - if (!iter_op) - return -EINVAL; - - if (opcode == IOCB_CMD_PREADV || opcode == IOCB_CMD_PWRITEV) - ret = aio_setup_vectored_rw(rw, buf, len, - &iovec, compat, &iter); - else { - ret = import_single_range(rw, buf, len, iovec, &iter); - iovec = NULL; - } - if (!ret) - ret = rw_verify_area(rw, file, &req->ki_pos, - iov_iter_count(&iter)); - if (ret < 0) { - kfree(iovec); - return ret; - } - - get_file(file); - if (rw == WRITE) - file_start_write(file); - - ret = iter_op(req, &iter); - - if (rw == WRITE) - file_end_write(file); - fput(file); - kfree(iovec); - break; - - default: - pr_debug("EINVAL: no operation provided\n"); - return -EINVAL; - } - - if (ret != -EIOCBQUEUED) { + switch (ret) { + case -EIOCBQUEUED: + return ret; + case -ERESTARTSYS: + case -ERESTARTNOINTR: + case -ERESTARTNOHAND: + case -ERESTART_RESTARTBLOCK: /* * There's no easy way to restart the syscall since other AIO's * may be already running. Just fail this IO with EINTR. */ - if (unlikely(ret == -ERESTARTSYS || ret == -ERESTARTNOINTR || - ret == -ERESTARTNOHAND || - ret == -ERESTART_RESTARTBLOCK)) - ret = -EINTR; + ret = -EINTR; + /*FALLTHRU*/ + default: aio_complete(req, ret, 0); + return 0; } +} - return 0; +static ssize_t aio_read(struct kiocb *req, struct iocb *iocb, bool vectored, + bool compat) +{ + struct file *file = req->ki_filp; + struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs; + struct iov_iter iter; + ssize_t ret; + + if (unlikely(!(file->f_mode & FMODE_READ))) + return -EBADF; + if (unlikely(!file->f_op->read_iter)) + return -EINVAL; + + ret = aio_setup_rw(READ, iocb, &iovec, vectored, compat, &iter); + if (ret) + return ret; + ret = rw_verify_area(READ, file, &req->ki_pos, iov_iter_count(&iter)); + if (!ret) + ret = aio_ret(req, file->f_op->read_iter(req, &iter)); + kfree(iovec); + return ret; +} + +static ssize_t aio_write(struct kiocb *req, struct iocb *iocb, bool vectored, + bool compat) +{ + struct file *file = req->ki_filp; + struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs; + struct iov_iter iter; + ssize_t ret; + + if (unlikely(!(file->f_mode & FMODE_WRITE))) + return -EBADF; + if (unlikely(!file->f_op->write_iter)) + return -EINVAL; + + ret = aio_setup_rw(WRITE, iocb, &iovec, vectored, compat, &iter); + if (ret) + return ret; + ret = rw_verify_area(WRITE, file, &req->ki_pos, iov_iter_count(&iter)); + if (!ret) { + file_start_write(file); + ret = aio_ret(req, file->f_op->write_iter(req, &iter)); + file_end_write(file); + } + kfree(iovec); + return ret; } static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, struct iocb *iocb, bool compat) { struct aio_kiocb *req; + struct file *file; ssize_t ret; /* enforce forwards compatibility on users */ @@ -1518,7 +1508,7 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, if (unlikely(!req)) return -EAGAIN; - req->common.ki_filp = fget(iocb->aio_fildes); + req->common.ki_filp = file = fget(iocb->aio_fildes); if (unlikely(!req->common.ki_filp)) { ret = -EBADF; goto out_put_req; @@ -1553,13 +1543,29 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, req->ki_user_iocb = user_iocb; req->ki_user_data = iocb->aio_data; - ret = aio_run_iocb(&req->common, iocb->aio_lio_opcode, - (char __user *)(unsigned long)iocb->aio_buf, - iocb->aio_nbytes, - compat); - if (ret) - goto out_put_req; + get_file(file); + switch (iocb->aio_lio_opcode) { + case IOCB_CMD_PREAD: + ret = aio_read(&req->common, iocb, false, compat); + break; + case IOCB_CMD_PWRITE: + ret = aio_write(&req->common, iocb, false, compat); + break; + case IOCB_CMD_PREADV: + ret = aio_read(&req->common, iocb, true, compat); + break; + case IOCB_CMD_PWRITEV: + ret = aio_write(&req->common, iocb, true, compat); + break; + default: + pr_debug("invalid aio operation %d\n", iocb->aio_lio_opcode); + ret = -EINVAL; + break; + } + fput(file); + if (ret && ret != -EIOCBQUEUED) + goto out_put_req; return 0; out_put_req: put_reqs_available(ctx, 1); From 70fe2f48152e60664809e2fed76bbb50c9fa2aa3 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Sun, 30 Oct 2016 11:42:04 -0500 Subject: [PATCH 037/224] aio: fix freeze protection of aio writes Currently we dropped freeze protection of aio writes just after IO was submitted. Thus aio write could be in flight while the filesystem was frozen and that could result in unexpected situation like aio completion wanting to convert extent type on frozen filesystem. Testcase from Dmitry triggering this is like: for ((i=0;i<60;i++));do fsfreeze -f /mnt ;sleep 1;fsfreeze -u /mnt;done & fio --bs=4k --ioengine=libaio --iodepth=128 --size=1g --direct=1 \ --runtime=60 --filename=/mnt/file --name=rand-write --rw=randwrite Fix the problem by dropping freeze protection only once IO is completed in aio_complete(). Reported-by: Dmitry Monakhov Signed-off-by: Jan Kara [hch: forward ported on top of various VFS and aio changes] Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/aio.c | 19 ++++++++++++++++++- include/linux/fs.h | 1 + 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/fs/aio.c b/fs/aio.c index c19755187ca5..428484f2f841 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1078,6 +1078,17 @@ static void aio_complete(struct kiocb *kiocb, long res, long res2) unsigned tail, pos, head; unsigned long flags; + if (kiocb->ki_flags & IOCB_WRITE) { + struct file *file = kiocb->ki_filp; + + /* + * Tell lockdep we inherited freeze protection from submission + * thread. + */ + __sb_writers_acquired(file_inode(file)->i_sb, SB_FREEZE_WRITE); + file_end_write(file); + } + /* * Special case handling for sync iocbs: * - events go directly into the iocb for fast handling @@ -1473,9 +1484,15 @@ static ssize_t aio_write(struct kiocb *req, struct iocb *iocb, bool vectored, return ret; ret = rw_verify_area(WRITE, file, &req->ki_pos, iov_iter_count(&iter)); if (!ret) { + req->ki_flags |= IOCB_WRITE; file_start_write(file); ret = aio_ret(req, file->f_op->write_iter(req, &iter)); - file_end_write(file); + /* + * We release freeze protection in aio_complete(). Fool lockdep + * by telling it the lock got released so that it doesn't + * complain about held lock when we return to userspace. + */ + __sb_writers_release(file_inode(file)->i_sb, SB_FREEZE_WRITE); } kfree(iovec); return ret; diff --git a/include/linux/fs.h b/include/linux/fs.h index ff7bcd9e8398..dc0478c07b2a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -321,6 +321,7 @@ struct writeback_control; #define IOCB_HIPRI (1 << 3) #define IOCB_DSYNC (1 << 4) #define IOCB_SYNC (1 << 5) +#define IOCB_WRITE (1 << 6) struct kiocb { struct file *ki_filp; From 9b9d7cdd0a20a8c26a022604580f93516ad69c36 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Fri, 21 Oct 2016 16:21:07 +0530 Subject: [PATCH 038/224] usb: dwc3: Fix error handling for core init Fixing the sequence of events in dwc3_core_init() error exit path. dwc3_core_exit() call is also removed from the error path since, whatever it's doing is already done. Fixes: c499ff7 usb: dwc3: core: re-factor init and exit paths Cc: Felipe Balbi Cc: Greg KH Cc: Stable # 4.8+ Signed-off-by: Vivek Gautam Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 7287a763cd0c..fea446900cad 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -769,15 +769,14 @@ static int dwc3_core_init(struct dwc3 *dwc) return 0; err4: - phy_power_off(dwc->usb2_generic_phy); + phy_power_off(dwc->usb3_generic_phy); err3: - phy_power_off(dwc->usb3_generic_phy); + phy_power_off(dwc->usb2_generic_phy); err2: usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); - dwc3_core_exit(dwc); err1: usb_phy_shutdown(dwc->usb2_phy); From 4accb8a1ee7d82f02bcbacba0e50995c531918d4 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 21 Oct 2016 15:23:59 +0300 Subject: [PATCH 039/224] usb: dwc3: st: add missing include dwc3-st uses pinctrl_pm_select_*_state() however it doesn't include the necessary header. Fix the build break caused by that, by simply including the missing header. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-st.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 89a2f712fdfe..aaaf256f71dd 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include "core.h" From c5f0627488be996e833038bdba01e45698ddaa26 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 11 Oct 2016 13:41:02 -0500 Subject: [PATCH 040/224] driver core: skip removal test for non-removable drivers Some drivers do not support removal/unbinding. These drivers should have drv->suppress_bind_attrs set to true, so use that to skip the removal test. This doesn't fix anything reported so far, but should prevent some other cases. Some drivers will need fixes to set suppress_bind_attrs to avoid this test. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=177021 Fixes: bea5b158ff0d ("driver core: add test of driver remove calls during probe") Reported-by: Laszlo Ersek Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index d22a7260f42b..8937a7ad7165 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -324,7 +324,8 @@ static int really_probe(struct device *dev, struct device_driver *drv) { int ret = -EPROBE_DEFER; int local_trigger_count = atomic_read(&deferred_trigger_count); - bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE); + bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE) && + !drv->suppress_bind_attrs; if (defer_all_probes) { /* From bdacd1b426db83ac8ecf21aef1848120ffe53c07 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 11 Oct 2016 13:41:03 -0500 Subject: [PATCH 041/224] driver core: fix smatch warning on dev->bus check Commit d42a09802174 (driver core: skip removal test for non-removable drivers) introduced a smatch warning: drivers/base/dd.c:386 really_probe() warn: variable dereferenced before check 'dev->bus' (see line 373) Fix the warning by removing the dev->bus NULL check. dev->bus will never be NULL, so the check was unnecessary. Reported-by: Dan Carpenter Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 8937a7ad7165..d76cd97a98b6 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -384,7 +384,7 @@ static int really_probe(struct device *dev, struct device_driver *drv) if (test_remove) { test_remove = false; - if (dev->bus && dev->bus->remove) + if (dev->bus->remove) dev->bus->remove(dev); else if (drv->remove) drv->remove(dev); From 85915b63ad8b796848f431b66c9ba5e356e722e5 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 31 Oct 2016 14:42:09 +0800 Subject: [PATCH 042/224] ASoC: sun4i-codec: return error code instead of NULL when create_card fails When sun4i_codec_create_card fails, we do not assign a proper error code to the return value. The return value would be 0 from the previous function call, or we would have bailed out sooner. This would confuse the driver core into thinking the device probe succeeded, when in fact it didn't, leaving various devres based resources lingering. Make the create_card function pass back a meaningful error code, and assign it to the return value. Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs") Signed-off-by: Chen-Yu Tsai Signed-off-by: Mark Brown --- sound/soc/sunxi/sun4i-codec.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index e047ec06d538..a60707761abf 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -765,11 +765,11 @@ static struct snd_soc_card *sun4i_codec_create_card(struct device *dev) card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL); if (!card) - return NULL; + return ERR_PTR(-ENOMEM); card->dai_link = sun4i_codec_create_link(dev, &card->num_links); if (!card->dai_link) - return NULL; + return ERR_PTR(-ENOMEM); card->dev = dev; card->name = "sun4i-codec"; @@ -876,7 +876,8 @@ static int sun4i_codec_probe(struct platform_device *pdev) } card = sun4i_codec_create_card(&pdev->dev); - if (!card) { + if (IS_ERR(card)) { + ret = PTR_ERR(card); dev_err(&pdev->dev, "Failed to create our card\n"); goto err_unregister_codec; } From 066f1f0b4719eb4573ef09bfc63c2bbb6f7676ca Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 10:41:49 -0400 Subject: [PATCH 043/224] drm/radeon: disable runtime pm in certain cases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the platform does not support hybrid graphics or ATPX dGPU power control. bug: https://bugzilla.kernel.org/show_bug.cgi?id=51381 Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_device.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index eb92aef46e3c..621af069a3d2 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -104,6 +104,14 @@ static const char radeon_family_name[][16] = { "LAST", }; +#if defined(CONFIG_VGA_SWITCHEROO) +bool radeon_has_atpx_dgpu_power_cntl(void); +bool radeon_is_atpx_hybrid(void); +#else +static inline bool radeon_has_atpx_dgpu_power_cntl(void) { return false; } +static inline bool radeon_is_atpx_hybrid(void) { return false; } +#endif + #define RADEON_PX_QUIRK_DISABLE_PX (1 << 0) #define RADEON_PX_QUIRK_LONG_WAKEUP (1 << 1) @@ -160,6 +168,11 @@ static void radeon_device_handle_px_quirks(struct radeon_device *rdev) if (rdev->px_quirk_flags & RADEON_PX_QUIRK_DISABLE_PX) rdev->flags &= ~RADEON_IS_PX; + + /* disable PX is the system doesn't support dGPU power control or hybrid gfx */ + if (!radeon_is_atpx_hybrid() && + !radeon_has_atpx_dgpu_power_cntl()) + rdev->flags &= ~RADEON_IS_PX; } /** From 84b1528e8cef55274f0df20e93513b3060ce495a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 11:02:31 -0400 Subject: [PATCH 044/224] drm/amdgpu: disable runtime pm in certain cases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the platform does not support hybrid graphics or ATPX dGPU power control. Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 203d98b00555..3938fca1ea8e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -99,6 +99,8 @@ int amdgpu_driver_load_kms(struct drm_device *dev, unsigned long flags) if ((amdgpu_runtime_pm != 0) && amdgpu_has_atpx() && + (amdgpu_is_atpx_hybrid() || + amdgpu_has_atpx_dgpu_power_cntl()) && ((flags & AMD_IS_APU) == 0)) flags |= AMD_IS_PX; From 0a6e21056eaa859353945c4b164f3ef574d84271 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 31 Oct 2016 12:19:39 -0400 Subject: [PATCH 045/224] drm/radeon: Fix kernel panic on shutdown Since commit a481daa88fd4 ("drm/radeon: always apply pci shutdown callbacks"), a Dell Latitude D600 laptop has crashed on shutdown. The PCI Identification of the graphics adapter is "VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] [1002:4c66] (rev 01)". Prior to commit b0c80bd5d2e3 ("drm/radeon: fix up dp aux tear down (v2)"), I have no idea where the panic happened as the screen was blanked before the crash. Since that more recent change, the panic has been in routine radeon_connector_unregister(), and has been shown to be due to a NULL value in the ddc_bus member of struct drm_connector. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=178421 Fixes: a481daa88fd4 ("drm/radeon: always apply pci shutdown callbacks") Signed-off-by: Larry Finger Cc: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index e18839d52e3e..27affbde058c 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -931,7 +931,7 @@ static void radeon_connector_unregister(struct drm_connector *connector) { struct radeon_connector *radeon_connector = to_radeon_connector(connector); - if (radeon_connector->ddc_bus->has_aux) { + if (radeon_connector->ddc_bus && radeon_connector->ddc_bus->has_aux) { drm_dp_aux_unregister(&radeon_connector->ddc_bus->aux); radeon_connector->ddc_bus->has_aux = false; } From 582ab27a063a506ccb55fc48afcc325342a2deba Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Mon, 31 Oct 2016 19:02:39 +0200 Subject: [PATCH 046/224] mei: bus: fix received data size check in NFC fixup NFC version reply size checked against only header size, not against full message size. That may lead potentially to uninitialized memory access in version data. That leads to warnings when version data is accessed: drivers/misc/mei/bus-fixup.c: warning: '*((void *)&ver+11)' may be used uninitialized in this function [-Wuninitialized]: => 212:2 Reported in Build regressions/improvements in v4.9-rc3 https://lkml.org/lkml/2016/10/30/57 Fixes: 59fcd7c63abf (mei: nfc: Initial nfc implementation) Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus-fixup.c | 2 +- drivers/nfc/mei_phy.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index e9e6ea3ab73c..75b9d4ac8b1e 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -178,7 +178,7 @@ static int mei_nfc_if_version(struct mei_cl *cl, ret = 0; bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length); - if (bytes_recv < 0 || bytes_recv < sizeof(struct mei_nfc_reply)) { + if (bytes_recv < if_version_length) { dev_err(bus->dev, "Could not read IF version\n"); ret = -EIO; goto err; diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c index 83deda4bb4d6..6f9563a96488 100644 --- a/drivers/nfc/mei_phy.c +++ b/drivers/nfc/mei_phy.c @@ -133,7 +133,7 @@ static int mei_nfc_if_version(struct nfc_mei_phy *phy) return -ENOMEM; bytes_recv = mei_cldev_recv(phy->cldev, (u8 *)reply, if_version_length); - if (bytes_recv < 0 || bytes_recv < sizeof(struct mei_nfc_reply)) { + if (bytes_recv < 0 || bytes_recv < if_version_length) { pr_err("Could not read IF version\n"); r = -EIO; goto err; From eef2b41122425dbddd16d70371bd000f601161d6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 12:27:52 -0400 Subject: [PATCH 047/224] drm/amdgpu: make sure ddc_bus is valid in connector unregister This should only happen on boards TV connectors which do not have a ddc bus for those connectors. None of the asics supported by amdgpu support tv, so we shouldn't hit this, but check to be on the safe side (e.g., bios bug for example). Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c index e3281d4e3e41..086aa5c9c634 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c @@ -769,7 +769,7 @@ static void amdgpu_connector_unregister(struct drm_connector *connector) { struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(connector); - if (amdgpu_connector->ddc_bus->has_aux) { + if (amdgpu_connector->ddc_bus && amdgpu_connector->ddc_bus->has_aux) { drm_dp_aux_unregister(&amdgpu_connector->ddc_bus->aux); amdgpu_connector->ddc_bus->has_aux = false; } From 91efdb2718e0c5ff014f0cf98cac99f088a9a4d2 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 29 Oct 2016 23:32:44 +0300 Subject: [PATCH 048/224] drm/amd/powerplay: don't succeed in getters if fan is missing Otherwise callers end up using uninitialized data. Reviewed-by: Edward O'Callaghan Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c index fb6c6f6106d5..29d0319b22e6 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c @@ -30,7 +30,7 @@ int smu7_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info) { if (hwmgr->thermal_controller.fanInfo.bNoFan) - return 0; + return -ENODEV; fan_speed_info->supports_percent_read = true; fan_speed_info->supports_percent_write = true; @@ -60,7 +60,7 @@ int smu7_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint64_t tmp64; if (hwmgr->thermal_controller.fanInfo.bNoFan) - return 0; + return -ENODEV; duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100); @@ -89,7 +89,7 @@ int smu7_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed) if (hwmgr->thermal_controller.fanInfo.bNoFan || (hwmgr->thermal_controller.fanInfo. ucTachometerPulsesPerRevolution == 0)) - return 0; + return -ENODEV; tach_period = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_TACH_STATUS, TACH_PERIOD); From c24784f01549ecdf23fc00d0588423bcf8956714 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Fri, 28 Oct 2016 17:04:07 +0200 Subject: [PATCH 049/224] drm/amd: fix scheduler fence teardown order v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some fences might be alive even after we have stopped the scheduler leading to warnings about leaked objects from the SLUB allocator. Fix this by allocating/freeing the SLUB allocator from the module init/fini functions just like we do it for hw fences. v2: make variable static, add link to bug Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=97500 Reported-by: Grazvydas Ignotas Signed-off-by: Christian König Reviewed-by: Alex Deucher (v1) Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 ++ drivers/gpu/drm/amd/scheduler/gpu_scheduler.c | 13 ------------- drivers/gpu/drm/amd/scheduler/gpu_scheduler.h | 6 +++--- drivers/gpu/drm/amd/scheduler/sched_fence.c | 19 +++++++++++++++++++ 4 files changed, 24 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 71ed27eb3dde..73f2415630f8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -737,6 +737,7 @@ static int __init amdgpu_init(void) { amdgpu_sync_init(); amdgpu_fence_slab_init(); + amd_sched_fence_slab_init(); if (vgacon_text_force()) { DRM_ERROR("VGACON disables amdgpu kernel modesetting.\n"); return -EINVAL; @@ -756,6 +757,7 @@ static void __exit amdgpu_exit(void) drm_pci_exit(driver, pdriver); amdgpu_unregister_atpx_handler(); amdgpu_sync_fini(); + amd_sched_fence_slab_fini(); amdgpu_fence_slab_fini(); } diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c index 910b8d5b21c5..ffe1f85ce300 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c @@ -34,9 +34,6 @@ static bool amd_sched_entity_is_ready(struct amd_sched_entity *entity); static void amd_sched_wakeup(struct amd_gpu_scheduler *sched); static void amd_sched_process_job(struct fence *f, struct fence_cb *cb); -struct kmem_cache *sched_fence_slab; -atomic_t sched_fence_slab_ref = ATOMIC_INIT(0); - /* Initialize a given run queue struct */ static void amd_sched_rq_init(struct amd_sched_rq *rq) { @@ -618,13 +615,6 @@ int amd_sched_init(struct amd_gpu_scheduler *sched, INIT_LIST_HEAD(&sched->ring_mirror_list); spin_lock_init(&sched->job_list_lock); atomic_set(&sched->hw_rq_count, 0); - if (atomic_inc_return(&sched_fence_slab_ref) == 1) { - sched_fence_slab = kmem_cache_create( - "amd_sched_fence", sizeof(struct amd_sched_fence), 0, - SLAB_HWCACHE_ALIGN, NULL); - if (!sched_fence_slab) - return -ENOMEM; - } /* Each scheduler will run on a seperate kernel thread */ sched->thread = kthread_run(amd_sched_main, sched, sched->name); @@ -645,7 +635,4 @@ void amd_sched_fini(struct amd_gpu_scheduler *sched) { if (sched->thread) kthread_stop(sched->thread); - rcu_barrier(); - if (atomic_dec_and_test(&sched_fence_slab_ref)) - kmem_cache_destroy(sched_fence_slab); } diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h index 7cbbbfb502ef..51068e6c3d9a 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h @@ -30,9 +30,6 @@ struct amd_gpu_scheduler; struct amd_sched_rq; -extern struct kmem_cache *sched_fence_slab; -extern atomic_t sched_fence_slab_ref; - /** * A scheduler entity is a wrapper around a job queue or a group * of other entities. Entities take turns emitting jobs from their @@ -145,6 +142,9 @@ void amd_sched_entity_fini(struct amd_gpu_scheduler *sched, struct amd_sched_entity *entity); void amd_sched_entity_push_job(struct amd_sched_job *sched_job); +int amd_sched_fence_slab_init(void); +void amd_sched_fence_slab_fini(void); + struct amd_sched_fence *amd_sched_fence_create( struct amd_sched_entity *s_entity, void *owner); void amd_sched_fence_scheduled(struct amd_sched_fence *fence); diff --git a/drivers/gpu/drm/amd/scheduler/sched_fence.c b/drivers/gpu/drm/amd/scheduler/sched_fence.c index 3653b5a40494..88fc2d662579 100644 --- a/drivers/gpu/drm/amd/scheduler/sched_fence.c +++ b/drivers/gpu/drm/amd/scheduler/sched_fence.c @@ -27,6 +27,25 @@ #include #include "gpu_scheduler.h" +static struct kmem_cache *sched_fence_slab; + +int amd_sched_fence_slab_init(void) +{ + sched_fence_slab = kmem_cache_create( + "amd_sched_fence", sizeof(struct amd_sched_fence), 0, + SLAB_HWCACHE_ALIGN, NULL); + if (!sched_fence_slab) + return -ENOMEM; + + return 0; +} + +void amd_sched_fence_slab_fini(void) +{ + rcu_barrier(); + kmem_cache_destroy(sched_fence_slab); +} + struct amd_sched_fence *amd_sched_fence_create(struct amd_sched_entity *entity, void *owner) { From 245ae5e915853ced749eb47a343749cf0a9c4109 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Fri, 28 Oct 2016 17:39:08 +0200 Subject: [PATCH 050/224] drm/amdgpu: add some error handling to amdgpu_init v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Just to be clean should we ever run into -ENOMEM during module init. v2: fix typo in commit message Signed-off-by: Christian König Reviewed-by: Alex Deucher (v1) Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 26 ++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 73f2415630f8..02ff0747197c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -735,9 +735,20 @@ static struct pci_driver amdgpu_kms_pci_driver = { static int __init amdgpu_init(void) { - amdgpu_sync_init(); - amdgpu_fence_slab_init(); - amd_sched_fence_slab_init(); + int r; + + r = amdgpu_sync_init(); + if (r) + goto error_sync; + + r = amdgpu_fence_slab_init(); + if (r) + goto error_fence; + + r = amd_sched_fence_slab_init(); + if (r) + goto error_sched; + if (vgacon_text_force()) { DRM_ERROR("VGACON disables amdgpu kernel modesetting.\n"); return -EINVAL; @@ -749,6 +760,15 @@ static int __init amdgpu_init(void) amdgpu_register_atpx_handler(); /* let modprobe override vga console setting */ return drm_pci_init(driver, pdriver); + +error_sched: + amdgpu_fence_slab_fini(); + +error_fence: + amdgpu_sync_fini(); + +error_sync: + return r; } static void __exit amdgpu_exit(void) From 022d00ee0b55e6cd49048acadb9bf76c37e538d8 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 31 Oct 2016 11:25:43 +0000 Subject: [PATCH 051/224] ASoC: lpass-platform: Fix broken pcm data usage This patch fixes lpass-platform driver which was broken in v4.9-rc1. lpass_pcm_data data structure holds information specific to stream. Holding a single private pointer to it in global lpass_data will not work, because it would be overwritten by for each pcm instance. This code was breaking playback when we have both playback and capture pcm streams, as playback settings are over written by capture settings. Fix this by moving channel allocation logic out of pcm_new to pcm_open so that we can store the stream specific information in private_data of snd_pcm_runtime. Fixes: 6adcbdcd4b6e ("ASoC: lpass-platform: don't use snd_soc_pcm_set_drvdata()") Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/lpass-platform.c | 165 +++++++++++++++----------------- sound/soc/qcom/lpass.h | 1 - 2 files changed, 79 insertions(+), 87 deletions(-) diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index e2ff538a8aa5..07000f53db44 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -61,7 +61,40 @@ static int lpass_platform_pcmops_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; - int ret; + struct snd_soc_dai *cpu_dai = soc_runtime->cpu_dai; + struct lpass_data *drvdata = + snd_soc_platform_get_drvdata(soc_runtime->platform); + struct lpass_variant *v = drvdata->variant; + int ret, dma_ch, dir = substream->stream; + struct lpass_pcm_data *data; + + data = devm_kzalloc(soc_runtime->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->i2s_port = cpu_dai->driver->id; + runtime->private_data = data; + + if (v->alloc_dma_channel) + dma_ch = v->alloc_dma_channel(drvdata, dir); + if (dma_ch < 0) + return dma_ch; + + drvdata->substream[dma_ch] = substream; + + ret = regmap_write(drvdata->lpaif_map, + LPAIF_DMACTL_REG(v, dma_ch, dir), 0); + if (ret) { + dev_err(soc_runtime->dev, + "%s() error writing to rdmactl reg: %d\n", + __func__, ret); + return ret; + } + + if (dir == SNDRV_PCM_STREAM_PLAYBACK) + data->rdma_ch = dma_ch; + else + data->wrdma_ch = dma_ch; snd_soc_set_runtime_hwparams(substream, &lpass_platform_pcm_hardware); @@ -80,13 +113,40 @@ static int lpass_platform_pcmops_open(struct snd_pcm_substream *substream) return 0; } +static int lpass_platform_pcmops_close(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + struct lpass_data *drvdata = + snd_soc_platform_get_drvdata(soc_runtime->platform); + struct lpass_variant *v = drvdata->variant; + struct lpass_pcm_data *data; + int dma_ch, dir = substream->stream; + + data = runtime->private_data; + v = drvdata->variant; + + if (dir == SNDRV_PCM_STREAM_PLAYBACK) + dma_ch = data->rdma_ch; + else + dma_ch = data->wrdma_ch; + + drvdata->substream[dma_ch] = NULL; + + if (v->free_dma_channel) + v->free_dma_channel(drvdata, dma_ch); + + return 0; +} + static int lpass_platform_pcmops_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; snd_pcm_format_t format = params_format(params); unsigned int channels = params_channels(params); @@ -179,7 +239,8 @@ static int lpass_platform_pcmops_hw_free(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; unsigned int reg; int ret; @@ -203,7 +264,8 @@ static int lpass_platform_pcmops_prepare(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; int ret, ch, dir = substream->stream; @@ -257,7 +319,8 @@ static int lpass_platform_pcmops_trigger(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; int ret, ch, dir = substream->stream; @@ -333,7 +396,8 @@ static snd_pcm_uframes_t lpass_platform_pcmops_pointer( struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; unsigned int base_addr, curr_addr; int ret, ch, dir = substream->stream; @@ -374,6 +438,7 @@ static int lpass_platform_pcmops_mmap(struct snd_pcm_substream *substream, static const struct snd_pcm_ops lpass_platform_pcm_ops = { .open = lpass_platform_pcmops_open, + .close = lpass_platform_pcmops_close, .ioctl = snd_pcm_lib_ioctl, .hw_params = lpass_platform_pcmops_hw_params, .hw_free = lpass_platform_pcmops_hw_free, @@ -470,117 +535,45 @@ static int lpass_platform_pcm_new(struct snd_soc_pcm_runtime *soc_runtime) { struct snd_pcm *pcm = soc_runtime->pcm; struct snd_pcm_substream *psubstream, *csubstream; - struct snd_soc_dai *cpu_dai = soc_runtime->cpu_dai; - struct lpass_data *drvdata = - snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_variant *v = drvdata->variant; int ret = -EINVAL; - struct lpass_pcm_data *data; size_t size = lpass_platform_pcm_hardware.buffer_bytes_max; - data = devm_kzalloc(soc_runtime->dev, sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->i2s_port = cpu_dai->driver->id; - drvdata->private_data = data; - psubstream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; if (psubstream) { - if (v->alloc_dma_channel) - data->rdma_ch = v->alloc_dma_channel(drvdata, - SNDRV_PCM_STREAM_PLAYBACK); - - if (data->rdma_ch < 0) - return data->rdma_ch; - - drvdata->substream[data->rdma_ch] = psubstream; - ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, soc_runtime->platform->dev, size, &psubstream->dma_buffer); - if (ret) - goto playback_alloc_err; - - ret = regmap_write(drvdata->lpaif_map, - LPAIF_RDMACTL_REG(v, data->rdma_ch), 0); if (ret) { - dev_err(soc_runtime->dev, - "%s() error writing to rdmactl reg: %d\n", - __func__, ret); - goto capture_alloc_err; + dev_err(soc_runtime->dev, "Cannot allocate buffer(s)\n"); + return ret; } } csubstream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream; if (csubstream) { - if (v->alloc_dma_channel) - data->wrdma_ch = v->alloc_dma_channel(drvdata, - SNDRV_PCM_STREAM_CAPTURE); - - if (data->wrdma_ch < 0) { - ret = data->wrdma_ch; - goto capture_alloc_err; - } - - drvdata->substream[data->wrdma_ch] = csubstream; - ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, soc_runtime->platform->dev, size, &csubstream->dma_buffer); - if (ret) - goto capture_alloc_err; - - ret = regmap_write(drvdata->lpaif_map, - LPAIF_WRDMACTL_REG(v, data->wrdma_ch), 0); if (ret) { - dev_err(soc_runtime->dev, - "%s() error writing to wrdmactl reg: %d\n", - __func__, ret); - goto capture_reg_err; + dev_err(soc_runtime->dev, "Cannot allocate buffer(s)\n"); + if (psubstream) + snd_dma_free_pages(&psubstream->dma_buffer); + return ret; } + } return 0; - -capture_reg_err: - if (csubstream) - snd_dma_free_pages(&csubstream->dma_buffer); - -capture_alloc_err: - if (psubstream) - snd_dma_free_pages(&psubstream->dma_buffer); - - playback_alloc_err: - dev_err(soc_runtime->dev, "Cannot allocate buffer(s)\n"); - - return ret; } static void lpass_platform_pcm_free(struct snd_pcm *pcm) { - struct snd_soc_pcm_runtime *rt; - struct lpass_data *drvdata; - struct lpass_pcm_data *data; - struct lpass_variant *v; struct snd_pcm_substream *substream; - int ch, i; + int i; for (i = 0; i < ARRAY_SIZE(pcm->streams); i++) { substream = pcm->streams[i].substream; if (substream) { - rt = substream->private_data; - drvdata = snd_soc_platform_get_drvdata(rt->platform); - data = drvdata->private_data; - - ch = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - ? data->rdma_ch - : data->wrdma_ch; - v = drvdata->variant; - drvdata->substream[ch] = NULL; - if (v->free_dma_channel) - v->free_dma_channel(drvdata, ch); - snd_dma_free_pages(&substream->dma_buffer); substream->dma_buffer.area = NULL; substream->dma_buffer.addr = 0; diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h index 35b3cea8207d..924971b6ded5 100644 --- a/sound/soc/qcom/lpass.h +++ b/sound/soc/qcom/lpass.h @@ -59,7 +59,6 @@ struct lpass_data { struct clk *pcnoc_mport_clk; struct clk *pcnoc_sway_clk; - void *private_data; }; /* Vairant data per each SOC */ From 94201798dbce1cfd242407f1f422819a735c838f Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 31 Oct 2016 11:25:45 +0000 Subject: [PATCH 052/224] ASoC: lpass-cpu: add module licence and description This patch adds module licence to lpass-cpu driver, without this patch lpass-cpu module would taint with below error: snd_soc_lpass_cpu: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint snd_soc_lpass_cpu: Unknown symbol regmap_write (err 0) snd_soc_lpass_cpu: Unknown symbol devm_kmalloc (err 0) ... Signed-off-by: Srinivas Kandagatla Acked-by: Kenneth Westfield Signed-off-by: Mark Brown --- sound/soc/qcom/lpass-cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c index 3cde9fb977fa..eff3f9a8b685 100644 --- a/sound/soc/qcom/lpass-cpu.c +++ b/sound/soc/qcom/lpass-cpu.c @@ -586,3 +586,6 @@ int asoc_qcom_lpass_cpu_platform_remove(struct platform_device *pdev) return 0; } EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_platform_remove); + +MODULE_DESCRIPTION("QTi LPASS CPU Driver"); +MODULE_LICENSE("GPL v2"); From 091c531b09c151c2d712a8f347009ca3698a2467 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 17 Oct 2016 18:41:41 -0700 Subject: [PATCH 053/224] pinctrl: iproc: Fix iProc and NSP GPIO support Since commit 44a7185c2ae6 ("of/platform: Add common method to populate default bus"), ARM64 platform devices are populated at the arch_initcall_sync level; as a result, the platform_driver_probe calls in both the iProc and NSP GPIO drivers fail with -ENODEV since by that time the platform device was not yet registered. Replace platform_driver_probe with platform_driver_register, that allow the device to be register later Fixes: 44a7185c2ae6 ("of/platform: Add common method to populate default bus") Signed-off-by: Ray Jui Tested-by: Eric Anholt Signed-off-by: Linus Walleij --- drivers/pinctrl/bcm/pinctrl-iproc-gpio.c | 2 +- drivers/pinctrl/bcm/pinctrl-nsp-gpio.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c index 7f7700716398..5d1e505c3c63 100644 --- a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c +++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c @@ -844,6 +844,6 @@ static struct platform_driver iproc_gpio_driver = { static int __init iproc_gpio_init(void) { - return platform_driver_probe(&iproc_gpio_driver, iproc_gpio_probe); + return platform_driver_register(&iproc_gpio_driver); } arch_initcall_sync(iproc_gpio_init); diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c index 35783db1c10b..c8deb8be1da7 100644 --- a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c +++ b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c @@ -741,6 +741,6 @@ static struct platform_driver nsp_gpio_driver = { static int __init nsp_gpio_init(void) { - return platform_driver_probe(&nsp_gpio_driver, nsp_gpio_probe); + return platform_driver_register(&nsp_gpio_driver); } arch_initcall_sync(nsp_gpio_init); From c35e7790dcbe74b0c85f4c26bbe7e15510422684 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Tue, 18 Oct 2016 09:16:28 +0200 Subject: [PATCH 054/224] pinctrl: st: don't specify default interrupt trigger Thanks to 332e99d5ae4 which now alerts of default trigger usage when configuring interrupts. Signed-off-by: Patrice Chotard Acked-by: Peter Griffin Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-st.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c index 99da4cf91031..b7bb37167969 100644 --- a/drivers/pinctrl/pinctrl-st.c +++ b/drivers/pinctrl/pinctrl-st.c @@ -1512,7 +1512,7 @@ static int st_gpiolib_register_bank(struct st_pinctrl *info, if (info->irqmux_base || gpio_irq > 0) { err = gpiochip_irqchip_add(&bank->gpio_chip, &st_gpio_irqchip, 0, handle_simple_irq, - IRQ_TYPE_LEVEL_LOW); + IRQ_TYPE_NONE); if (err) { gpiochip_remove(&bank->gpio_chip); dev_info(dev, "could not add irqchip\n"); From 1064a2b41579d77af16164f5dd7bc6948ba1d5be Mon Sep 17 00:00:00 2001 From: Alexandre TORGUE Date: Thu, 20 Oct 2016 15:26:51 +0200 Subject: [PATCH 055/224] pinctrl: stm32: remove dependency with interrupt controller This patch allows to probe stm32 pinctrl driver even if no interrupt controller is defined to manage gpio irqs. Signed-off-by: Alexandre TORGUE Signed-off-by: Linus Walleij --- drivers/pinctrl/stm32/pinctrl-stm32.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index 200667f08c37..efc43711ff5c 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -1092,9 +1092,11 @@ int stm32_pctl_probe(struct platform_device *pdev) return -EINVAL; } - ret = stm32_pctrl_dt_setup_irq(pdev, pctl); - if (ret) - return ret; + if (of_find_property(np, "interrupt-parent", NULL)) { + ret = stm32_pctrl_dt_setup_irq(pdev, pctl); + if (ret) + return ret; + } for_each_child_of_node(np, child) if (of_property_read_bool(child, "gpio-controller")) From 0553d8d0b03ad58f9917460c40a2e2b680f5bfdb Mon Sep 17 00:00:00 2001 From: Alexandre TORGUE Date: Thu, 20 Oct 2016 15:26:52 +0200 Subject: [PATCH 056/224] pinctrl: stm32: move gpio irqs binding to optional stm32 pinctrl driver could be probed even if no interrupt controller is defined to manage gpio irqs. Entries related to gpio irq management are moved to optional. Signed-off-by: Alexandre TORGUE Signed-off-by: Linus Walleij --- .../devicetree/bindings/pinctrl/st,stm32-pinctrl.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index f9753c416974..b24583aa34c3 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -14,11 +14,6 @@ Required properies: - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to gpio-bank node (children). - - interrupt-parent: phandle of the interrupt parent to which the external - GPIO interrupts are forwarded to. - - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node - which includes IRQ mux selection register, and the offset of the IRQ mux - selection register. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins. @@ -37,6 +32,11 @@ Required properties: Optional properties: - reset: : Reference to the reset controller + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node + which includes IRQ mux selection register, and the offset of the IRQ mux + selection register. Example: #include From 9999fe5df58773489b9564467b5c8cfb364e0b80 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 18 Oct 2016 14:09:15 -0700 Subject: [PATCH 057/224] pinctrl: imx: reset group index on probe Group index is incremented on every new group parsed. Since the field is part of struct imx_pinctrl_soc_info, which is typically a global variable passed by the individual pinctrl-imx.c based driver, it does not get cleared automatically when re-probing the driver. This lead imx_pinctrl_parse_functions passing a group pointer which is outside of the allocated group space on second probe and onwards. Typically this ended up in a NULL pointer dereference when accessing the name field like this: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... PC is at strcmp+0x18/0x44 LR is at imx_dt_node_to_map+0xc4/0x290 Avoid this by setting group_index to 0 on probe. This has been observed when using DEBUG_TEST_DRIVER_REMOVE. Signed-off-by: Stefan Agner Signed-off-by: Linus Walleij --- drivers/pinctrl/freescale/pinctrl-imx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index 47613201269a..79c4e14a5a75 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -687,6 +687,7 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev, if (!info->functions) return -ENOMEM; + info->group_index = 0; if (flat_funcs) { info->ngroups = of_get_child_count(np); } else { From 6227e9f0e9ee988e2cfb425b02ef17f233b1d8d7 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 31 Oct 2016 15:59:11 +0300 Subject: [PATCH 058/224] ARC: Enable PERF_EVENTS in nSIM driven platforms Now when we have properly working performance counters in nSIM even with interrupt support (fix should be a part of upcoming nSIM engineering build 2016.12-005) we may enable perf support by default for all platforms that use nSIM for ARC cores simulation. Note 1: PCT node was missing for some reason in nsimosci.dts while all other nSIM-related .dts files already had PCT node for quite some time, so adding it now. Note 2: All defconfigs were regenerated with "make savedefconfig" which led to some clean-ups in nsimosci_hs_smp_defconfig: CONFIG_FRAMEBUFFER_CONSOLE=y was removed because it is automatically selected now by DRM. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/axc001.dtsi | 2 +- arch/arc/boot/dts/nsim_700.dts | 2 +- arch/arc/boot/dts/nsimosci.dts | 4 ++++ arch/arc/configs/nsim_700_defconfig | 1 + arch/arc/configs/nsim_hs_defconfig | 1 + arch/arc/configs/nsim_hs_smp_defconfig | 1 + arch/arc/configs/nsimosci_defconfig | 1 + arch/arc/configs/nsimosci_hs_defconfig | 1 + arch/arc/configs/nsimosci_hs_smp_defconfig | 3 +-- 9 files changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi index 6ae2c476ad82..53ce226f77a5 100644 --- a/arch/arc/boot/dts/axc001.dtsi +++ b/arch/arc/boot/dts/axc001.dtsi @@ -71,7 +71,7 @@ debug_uart: dw-apb-uart@0x5000 { reg-io-width = <4>; }; - arcpmu0: pmu { + arcpct0: pct { compatible = "snps,arc700-pct"; }; }; diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts index ce0ccd20b5bf..5ee96b067c08 100644 --- a/arch/arc/boot/dts/nsim_700.dts +++ b/arch/arc/boot/dts/nsim_700.dts @@ -69,7 +69,7 @@ phy0: ethernet-phy@0 { }; }; - arcpmu0: pmu { + arcpct0: pct { compatible = "snps,arc700-pct"; }; }; diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts index bcf603142a33..3c391ba565ed 100644 --- a/arch/arc/boot/dts/nsimosci.dts +++ b/arch/arc/boot/dts/nsimosci.dts @@ -83,5 +83,9 @@ eth0: ethernet@f0003000 { reg = <0xf0003000 0x44>; interrupts = <7>; }; + + arcpct0: pct { + compatible = "snps,arc700-pct"; + }; }; }; diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig index 7314f538847b..b0066a749d4c 100644 --- a/arch/arc/configs/nsim_700_defconfig +++ b/arch/arc/configs/nsim_700_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig index 65ab9fbf83f2..ebe9ebb92933 100644 --- a/arch/arc/configs/nsim_hs_defconfig +++ b/arch/arc/configs/nsim_hs_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig index 3b3990cddbe1..4bde43278be6 100644 --- a/arch/arc/configs/nsim_hs_smp_defconfig +++ b/arch/arc/configs/nsim_hs_smp_defconfig @@ -12,6 +12,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig index 98cf20933bbb..f6fb3d26557e 100644 --- a/arch/arc/configs/nsimosci_defconfig +++ b/arch/arc/configs/nsimosci_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig index ddf8b96d494e..b9f0fe00044b 100644 --- a/arch/arc/configs/nsimosci_hs_defconfig +++ b/arch/arc/configs/nsimosci_hs_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig index ceb90745326e..6da71ba253a9 100644 --- a/arch/arc/configs/nsimosci_hs_smp_defconfig +++ b/arch/arc/configs/nsimosci_hs_smp_defconfig @@ -10,6 +10,7 @@ CONFIG_IKCONFIG_PROC=y # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" +CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y CONFIG_MODULES=y @@ -34,7 +35,6 @@ CONFIG_INET=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y @@ -72,7 +72,6 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HWMON is not set CONFIG_DRM=y CONFIG_DRM_ARCPGU=y -CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set From 8f6d9eb2a3f38f1acd04efa0aeb8b81f5373c923 Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Sun, 30 Oct 2016 09:48:42 +0200 Subject: [PATCH 059/224] ARC: [SMP] avoid overriding present cpumask At smp_prepare_cpus() we set present cpu mask as part of init for all CPUs at range [0-max_cpus]. This is done without checking if this mask is already being set. At platform of eznps this mask is already being initialized at smp_init_cpus() by using hook plat_smp_ops.init_early_smp(). So to avoid overriding of present cpu mask we check the number of bits which are set in this mask. At the begin only bit for boot CPU is set so if number of bits already set is no more than one we can be assure that there is no overriding of this mask. Signed-off-by: Noam Camus Signed-off-by: Vineet Gupta --- arch/arc/kernel/smp.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index f183cc648851..f00029e9cbe4 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -67,11 +67,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus) int i; /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. + * if platform didn't set the present map already, do it now + * boot cpu is set to present already by init/main.c */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); + if (num_present_cpus() <= 1) { + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + } } void __init smp_cpus_done(unsigned int max_cpus) From c25badc9ceb612c6cc227a6fc4b0aaf678e3bcf9 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Wed, 19 Oct 2016 15:53:52 -0700 Subject: [PATCH 060/224] cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set When converting to a shared library in ac5a181d065d ("cpupower: Add cpuidle parts into library"), cpu_freq_cpu_exists() was converted to cpupower_is_cpu_online(). cpu_req_cpu_exists() returned 0 on success and -ENOSYS on failure whereas cpupower_is_cpu_online returns 1 on success. Check for the correct return value in cpufreq-set. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1374212 Fixes: ac5a181d065d (cpupower: Add cpuidle parts into library) Reported-by: Julian Seward Signed-off-by: Laura Abbott Acked-by: Thomas Renninger Cc: 4.7+ # 4.7+ Signed-off-by: Rafael J. Wysocki --- tools/power/cpupower/utils/cpufreq-set.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c index b4bf76971dc9..1eef0aed6423 100644 --- a/tools/power/cpupower/utils/cpufreq-set.c +++ b/tools/power/cpupower/utils/cpufreq-set.c @@ -296,7 +296,7 @@ int cmd_freq_set(int argc, char **argv) struct cpufreq_affected_cpus *cpus; if (!bitmask_isbitset(cpus_chosen, cpu) || - cpupower_is_cpu_online(cpu)) + cpupower_is_cpu_online(cpu) != 1) continue; cpus = cpufreq_get_related_cpus(cpu); @@ -316,10 +316,7 @@ int cmd_freq_set(int argc, char **argv) cpu <= bitmask_last(cpus_chosen); cpu++) { if (!bitmask_isbitset(cpus_chosen, cpu) || - cpupower_is_cpu_online(cpu)) - continue; - - if (cpupower_is_cpu_online(cpu) != 1) + cpupower_is_cpu_online(cpu) != 1) continue; printf(_("Setting cpu: %d\n"), cpu); From fd9afd3cbe404998d732be6cc798f749597c5114 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 1 Nov 2016 13:20:22 +0200 Subject: [PATCH 061/224] usb: gadget: u_ether: remove interrupt throttling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to Dave Miller "the networking stack has a hard requirement that all SKBs which are transmitted must have their completion signalled in a fininte amount of time. This is because, until the SKB is freed by the driver, it holds onto socket, netfilter, and other subsystem resources." In summary, this means that using TX IRQ throttling for the networking gadgets is, at least, complex and we should avoid it for the time being. Cc: Reported-by: Ville Syrjälä Tested-by: Ville Syrjälä Suggested-by: David Miller Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_ether.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index fe1811650dbc..5d1bd13a56c1 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -588,14 +588,6 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, req->length = length; - /* throttle high/super speed IRQ rate back slightly */ - if (gadget_is_dualspeed(dev->gadget)) - req->no_interrupt = (((dev->gadget->speed == USB_SPEED_HIGH || - dev->gadget->speed == USB_SPEED_SUPER)) && - !list_empty(&dev->tx_reqs)) - ? ((atomic_read(&dev->tx_qlen) % dev->qmult) != 0) - : 0; - retval = usb_ep_queue(in, req, GFP_ATOMIC); switch (retval) { default: From d6124b409ca33c100170ffde51cd8dff761454a1 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 1 Nov 2016 12:13:31 +0100 Subject: [PATCH 062/224] uwb: fix device reference leaks This subsystem consistently fails to drop the device reference taken by class_find_device(). Note that some of these lookup functions already take a reference to the returned data, while others claim no reference is needed (or does not seem need one). Fixes: 183b9b592a62 ("uwb: add the UWB stack (core files)") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/lc-rc.c | 16 +++++++++++++--- drivers/uwb/pal.c | 2 ++ 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c index d059ad4d0dbd..97ee1b46db69 100644 --- a/drivers/uwb/lc-rc.c +++ b/drivers/uwb/lc-rc.c @@ -56,8 +56,11 @@ static struct uwb_rc *uwb_rc_find_by_index(int index) struct uwb_rc *rc = NULL; dev = class_find_device(&uwb_rc_class, NULL, &index, uwb_rc_index_match); - if (dev) + if (dev) { rc = dev_get_drvdata(dev); + put_device(dev); + } + return rc; } @@ -467,7 +470,9 @@ struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *target_rc) if (dev) { rc = dev_get_drvdata(dev); __uwb_rc_get(rc); + put_device(dev); } + return rc; } EXPORT_SYMBOL_GPL(__uwb_rc_try_get); @@ -520,8 +525,11 @@ struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *grandpa_dev) dev = class_find_device(&uwb_rc_class, NULL, grandpa_dev, find_rc_grandpa); - if (dev) + if (dev) { rc = dev_get_drvdata(dev); + put_device(dev); + } + return rc; } EXPORT_SYMBOL_GPL(uwb_rc_get_by_grandpa); @@ -553,8 +561,10 @@ struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *addr) struct uwb_rc *rc = NULL; dev = class_find_device(&uwb_rc_class, NULL, addr, find_rc_dev); - if (dev) + if (dev) { rc = dev_get_drvdata(dev); + put_device(dev); + } return rc; } diff --git a/drivers/uwb/pal.c b/drivers/uwb/pal.c index c1304b8d4985..678e93741ae1 100644 --- a/drivers/uwb/pal.c +++ b/drivers/uwb/pal.c @@ -97,6 +97,8 @@ static bool uwb_rc_class_device_exists(struct uwb_rc *target_rc) dev = class_find_device(&uwb_rc_class, NULL, target_rc, find_rc); + put_device(dev); + return (dev != NULL); } From f6b2db084b65b9dc0f910bc48d5f77c0e5166dc6 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 1 Nov 2016 00:01:59 -0700 Subject: [PATCH 063/224] vmbus: make sysfs names consistent with PCI In commit 9a56e5d6a0ba ("Drivers: hv: make VMBus bus ids persistent") the name of vmbus devices in sysfs changed to be (in 4.9-rc1): /sys/bus/vmbus/vmbus-6aebe374-9ba0-11e6-933c-00259086b36b The prefix ("vmbus-") is redundant and differs from how PCI is represented in sysfs. Therefore simplify to: /sys/bus/vmbus/6aebe374-9ba0-11e6-933c-00259086b36b Please merge this before 4.9 is released and the old format has to live forever. Signed-off-by: Stephen Hemminger Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/vmbus_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index a259e18d22d5..0276d2ef06ee 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -961,7 +961,7 @@ int vmbus_device_register(struct hv_device *child_device_obj) { int ret = 0; - dev_set_name(&child_device_obj->device, "vmbus-%pUl", + dev_set_name(&child_device_obj->device, "%pUl", child_device_obj->channel->offermsg.offer.if_instance.b); child_device_obj->device.bus = &hv_bus; From 8ec4b736d709562193566156c0dd40e327df2cbb Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 29 Oct 2016 08:10:03 -0200 Subject: [PATCH 064/224] Documentation/ABI: ibm_rtl: The "What:" fields are incomplete The "What:" field at the ABI should describe the location of the ABI, e. g. the position under a mounted sysfs. However, this file has only the basename without the path. Fix it. Cc: Vernon Mauery Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Darren Hart --- Documentation/ABI/testing/sysfs-devices-system-ibm-rtl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl index b82deeaec314..470def06ab0a 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl +++ b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl @@ -1,4 +1,4 @@ -What: state +What: /sys/devices/system/ibm_rtl/state Date: Sep 2010 KernelVersion: 2.6.37 Contact: Vernon Mauery @@ -10,7 +10,7 @@ Description: The state file allows a means by which to change in and Users: The ibm-prtm userspace daemon uses this interface. -What: version +What: /sys/devices/system/ibm_rtl/version Date: Sep 2010 KernelVersion: 2.6.37 Contact: Vernon Mauery From 1fdd14279eab2e9f79745631379f0c53cb8f9a5a Mon Sep 17 00:00:00 2001 From: "tang.junhui" Date: Fri, 28 Oct 2016 15:54:07 +0800 Subject: [PATCH 065/224] scsi: scsi_dh_alua: fix missing kref_put() in alua_rtpg_work() Reference count of pg leaks in alua_rtpg_work() since kref_put() is not called to decrease the reference count of pg when the condition pg->rtpg_sdev==NULL satisfied (actually it is easy to satisfy), it would cause memory of pg leakage. Signed-off-by: tang.junhui Cc: Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/device_handler/scsi_dh_alua.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 241829e59668..f375167f16ea 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -793,6 +793,7 @@ static void alua_rtpg_work(struct work_struct *work) WARN_ON(pg->flags & ALUA_PG_RUN_RTPG); WARN_ON(pg->flags & ALUA_PG_RUN_STPG); spin_unlock_irqrestore(&pg->lock, flags); + kref_put(&pg->kref, release_port_group); return; } if (pg->flags & ALUA_SYNC_STPG) From 6d3a56ed098566bc83d6c2afa74b4199c12ea074 Mon Sep 17 00:00:00 2001 From: Sreekanth Reddy Date: Fri, 28 Oct 2016 10:09:12 +0530 Subject: [PATCH 066/224] scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk While merging mpt3sas & mpt2sas code, we added the is_warpdrive check condition on the wrong line --------------------------------------------------------------------------- scsih_target_alloc(struct scsi_target *starget) sas_target_priv_data->handle = raid_device->handle; sas_target_priv_data->sas_address = raid_device->wwid; sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; - raid_device->starget = starget; + sas_target_priv_data->raid_device = raid_device; + if (ioc->is_warpdrive) + raid_device->starget = starget; } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); return 0; ------------------------------------------------------------------------------ That check should be for the line sas_target_priv_data->raid_device = raid_device; Due to above hunk, we are not initializing raid_device's starget for raid volumes, and so during raid disk deletion driver is not calling scsi_remove_target() API as driver observes starget field of raid_device's structure as NULL. Signed-off-by: Sreekanth Reddy Cc: # v4.4+ Fixes: 7786ab6aff9 ("mpt3sas: Ported WarpDrive product SSS6200 support") Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 209a969a979d..8aa769a2d919 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -1273,9 +1273,9 @@ scsih_target_alloc(struct scsi_target *starget) sas_target_priv_data->handle = raid_device->handle; sas_target_priv_data->sas_address = raid_device->wwid; sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; - sas_target_priv_data->raid_device = raid_device; if (ioc->is_warpdrive) - raid_device->starget = starget; + sas_target_priv_data->raid_device = raid_device; + raid_device->starget = starget; } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); return 0; From aac173e9618faadf8f92af6cc05e64f7acc64d79 Mon Sep 17 00:00:00 2001 From: David Jeffery Date: Fri, 28 Oct 2016 12:27:26 -0400 Subject: [PATCH 067/224] scsi: vmw_pvscsi: return SUCCESS for successful command aborts The vmw_pvscsi driver reports most successful aborts as FAILED to the scsi error handler. This is do to a misunderstanding of how completion_done() works and its interaction with a successful wait using wait_for_completion_timeout(). The vmw_pvscsi driver is expecting completion_done() to always return true if complete() has been called on the completion structure. But completion_done() returns true after complete() has been called only if no function like wait_for_completion_timeout() has seen the completion and cleared it as part of successfully waiting for the completion. Instead of using completion_done(), vmw_pvscsi should just use the return value from wait_for_completion_timeout() to know if the wait timed out or not. [mkp: bumped driver version per request] Signed-off-by: David Jeffery Reviewed-by: Laurence Oberman Reviewed-by: Ewan D. Milne Acked-by: Jim Gill Signed-off-by: Martin K. Petersen --- drivers/scsi/vmw_pvscsi.c | 5 +++-- drivers/scsi/vmw_pvscsi.h | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index 4a0d3cdc607c..15ca09cd16f3 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -793,6 +793,7 @@ static int pvscsi_abort(struct scsi_cmnd *cmd) unsigned long flags; int result = SUCCESS; DECLARE_COMPLETION_ONSTACK(abort_cmp); + int done; scmd_printk(KERN_DEBUG, cmd, "task abort on host %u, %p\n", adapter->host->host_no, cmd); @@ -824,10 +825,10 @@ static int pvscsi_abort(struct scsi_cmnd *cmd) pvscsi_abort_cmd(adapter, ctx); spin_unlock_irqrestore(&adapter->hw_lock, flags); /* Wait for 2 secs for the completion. */ - wait_for_completion_timeout(&abort_cmp, msecs_to_jiffies(2000)); + done = wait_for_completion_timeout(&abort_cmp, msecs_to_jiffies(2000)); spin_lock_irqsave(&adapter->hw_lock, flags); - if (!completion_done(&abort_cmp)) { + if (!done) { /* * Failed to abort the command, unmark the fact that it * was requested to be aborted. diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h index c097d2ccbde3..d41292ef85f2 100644 --- a/drivers/scsi/vmw_pvscsi.h +++ b/drivers/scsi/vmw_pvscsi.h @@ -26,7 +26,7 @@ #include -#define PVSCSI_DRIVER_VERSION_STRING "1.0.6.0-k" +#define PVSCSI_DRIVER_VERSION_STRING "1.0.7.0-k" #define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128 From df3d422cbac685da882e4c239dfda07de33d431b Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 1 Nov 2016 08:19:57 -0600 Subject: [PATCH 068/224] scsi: scsi_dh_alua: Fix a reference counting bug The code at the end of alua_rtpg_work() is as follows: scsi_device_put(sdev); kref_put(&pg->kref, release_port_group); In other words, alua_rtpg_queue() must hold an sdev reference and a pg reference before queueing rtpg work. If no rtpg work is queued no additional references should be held when alua_rtpg_queue() returns. If no rtpg work is queued, ensure that alua_rtpg_queue() only gives up the sdev reference if that reference was obtained by the same alua_rtpg_queue() call. Signed-off-by: Bart Van Assche Reported-by: Tang Junhui Cc: Hannes Reinecke Cc: Tang Junhui Cc: Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/device_handler/scsi_dh_alua.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index f375167f16ea..7bb20684e9fa 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -891,6 +891,7 @@ static void alua_rtpg_queue(struct alua_port_group *pg, /* Do not queue if the worker is already running */ if (!(pg->flags & ALUA_PG_RUNNING)) { kref_get(&pg->kref); + sdev = NULL; start_queue = 1; } } @@ -902,7 +903,8 @@ static void alua_rtpg_queue(struct alua_port_group *pg, if (start_queue && !queue_delayed_work(alua_wq, &pg->rtpg_work, msecs_to_jiffies(ALUA_RTPG_DELAY_MSECS))) { - scsi_device_put(sdev); + if (sdev) + scsi_device_put(sdev); kref_put(&pg->kref, release_port_group); } } From 3716a891d65cc04217da1af5f2bccb7eaf6092c2 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 1 Nov 2016 14:31:55 +0800 Subject: [PATCH 069/224] ASoC: sun4i-codec: Enable bus clock after getting GPIO In the current probe function the GPIO is acquired after the codec's bus clock is enabled. However if it fails to acquire the GPIO due to a deferred probe, it does not disable the bus clock before bailing out. This would result in the clock being enabled multiple times. Move the code that enables the bus clock after the part that gets the GPIO, maintaining a separation between resource acquisition and device enablement in the probe function. Signed-off-by: Chen-Yu Tsai Signed-off-by: Mark Brown --- sound/soc/sunxi/sun4i-codec.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index a60707761abf..56ed9472e89f 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -829,12 +829,6 @@ static int sun4i_codec_probe(struct platform_device *pdev) return PTR_ERR(scodec->clk_module); } - /* Enable the bus clock */ - if (clk_prepare_enable(scodec->clk_apb)) { - dev_err(&pdev->dev, "Failed to enable the APB clock\n"); - return -EINVAL; - } - scodec->gpio_pa = devm_gpiod_get_optional(&pdev->dev, "allwinner,pa", GPIOD_OUT_LOW); if (IS_ERR(scodec->gpio_pa)) { @@ -844,6 +838,12 @@ static int sun4i_codec_probe(struct platform_device *pdev) return ret; } + /* Enable the bus clock */ + if (clk_prepare_enable(scodec->clk_apb)) { + dev_err(&pdev->dev, "Failed to enable the APB clock\n"); + return -EINVAL; + } + /* DMA configuration for TX FIFO */ scodec->playback_dma_data.addr = res->start + SUN4I_CODEC_DAC_TXDATA; scodec->playback_dma_data.maxburst = 4; From a5dd506e1584e91f3e7500ab9a165aa1b49eabd4 Mon Sep 17 00:00:00 2001 From: Bill Kuzeja Date: Fri, 21 Oct 2016 16:45:27 -0400 Subject: [PATCH 070/224] scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init A system can get hung task timeouts if a qlogic board fails during initialization (if the board breaks again or fails the init). The hang involves the scsi scan. In a nutshell, since commit beb9e315e6e0 ("qla2xxx: Prevent removal and board_disable race"): ...it is possible to have freed ha (base_vha->hw) early by a call to qla2x00_remove_one when pdev->enable_cnt equals zero: if (!atomic_read(&pdev->enable_cnt)) { scsi_host_put(base_vha->host); kfree(ha); pci_set_drvdata(pdev, NULL); return; Almost always, the scsi_host_put above frees the vha structure (attached to the end of the Scsi_Host we're putting) since it's the last put, and life is good. However, if we are entering this routine because the adapter has broken sometime during initialization AND a scsi scan is already in progress (and has done its own scsi_host_get), vha will not be freed. What's worse, the scsi scan will access the freed ha structure through qla2xxx_scan_finished: if (time > vha->hw->loop_reset_delay * HZ) return 1; The scsi scan keeps checking to see if a scan is complete by calling qla2xxx_scan_finished. There is a timeout value that limits the length of time a scan can take (hw->loop_reset_delay, usually set to 5 seconds), but this definition is in the data structure (hw) that can get freed early. This can yield unpredictable results, the worst of which is that the scsi scan can hang indefinitely. This happens when the freed structure gets reused and loop_reset_delay gets overwritten with garbage, which the scan obliviously uses as its timeout value. The fix for this is simple: at the top of qla2xxx_scan_finished, check for the UNLOADING bit in the vha structure (_vha is not freed at this point). If UNLOADING is set, we exit the scan for this adapter immediately. After this last reference to the ha structure, we'll exit the scan for this adapter, and continue on. This problem is hard to hit, but I have run into it doing negative testing many times now (with a test specifically designed to bring it out), so I can verify that this fix works. My testing has been against a RHEL7 driver variant, but the bug and patch are equally relevant to to the upstream driver. Fixes: beb9e315e6e0 ("qla2xxx: Prevent removal and board_disable race") Cc: # v3.18+ Signed-off-by: Bill Kuzeja Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index ace65db1d2a2..4d99c3b37687 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2341,6 +2341,8 @@ qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time) { scsi_qla_host_t *vha = shost_priv(shost); + if (test_bit(UNLOADING, &vha->dpc_flags)) + return 1; if (!vha->host) return 1; if (time > vha->hw->loop_reset_delay * HZ) From 5c2f117a22e46a4afee6ddee29b653a7a2a6b41f Mon Sep 17 00:00:00 2001 From: Emil Lundmark Date: Wed, 12 Oct 2016 12:31:40 +0200 Subject: [PATCH 071/224] clk: imx: fix integer overflow in AV PLL round rate Since 'parent_rate * mfn' may overflow 32 bits, the result should be stored using 64 bits. The problem was discovered when trying to set the rate of the audio PLL (pll4_post_div) on an i.MX6Q. The desired rate was 196.608 MHz, but the actual rate returned was 192.000570 MHz. The round rate function should have been able to return 196.608 MHz, i.e., the desired rate. Fixes: ba7f4f557eb6 ("clk: imx: correct AV PLL rate formula") Cc: Anson Huang Signed-off-by: Emil Lundmark Reviewed-by: Fabio Estevam Acked-by: Shawn Guo Signed-off-by: Stephen Boyd --- drivers/clk/imx/clk-pllv3.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c index 19f9b622981a..7a6acc3e4a92 100644 --- a/drivers/clk/imx/clk-pllv3.c +++ b/drivers/clk/imx/clk-pllv3.c @@ -223,7 +223,7 @@ static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw, temp64 *= mfn; do_div(temp64, mfd); - return (parent_rate * div) + (u32)temp64; + return parent_rate * div + (unsigned long)temp64; } static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate, @@ -247,7 +247,11 @@ static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate, do_div(temp64, parent_rate); mfn = temp64; - return parent_rate * div + parent_rate * mfn / mfd; + temp64 = (u64)parent_rate; + temp64 *= mfn; + do_div(temp64, mfd); + + return parent_rate * div + (unsigned long)temp64; } static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate, From 7c1c5413a7bdf1c9adc8d979521f1b8286366aef Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 17 Oct 2016 13:42:23 -0500 Subject: [PATCH 072/224] clk: qoriq: Don't allow CPU clocks higher than starting value The boot-time frequency of a CPU is considered its rated maximum, as we have no other source of such information. However, this was previously only used for chips with 80% restrictions on secondary PLLs. This usually wasn't a problem because most chips/configs boot with a divider of /1, with other dividers being used only for dynamic frequency reduction. However, at least one config (LS1021A at less than 1 GHz) uses a different divider for top speed. This was causing cpufreq to set a frequency beyond the chip's rated speed. This is fixed by applying a 100%-of-initial-speed limit to all CPU PLLs, similar to the existing 80% limit that only applied to some. Signed-off-by: Scott Wood Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd --- drivers/clk/clk-qoriq.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c index 20b105584f82..80ae2a51452d 100644 --- a/drivers/clk/clk-qoriq.c +++ b/drivers/clk/clk-qoriq.c @@ -700,6 +700,7 @@ static struct clk * __init create_mux_common(struct clockgen *cg, struct mux_hwclock *hwc, const struct clk_ops *ops, unsigned long min_rate, + unsigned long max_rate, unsigned long pct80_rate, const char *fmt, int idx) { @@ -728,6 +729,8 @@ static struct clk * __init create_mux_common(struct clockgen *cg, continue; if (rate < min_rate) continue; + if (rate > max_rate) + continue; parent_names[j] = div->name; hwc->parent_to_clksel[j] = i; @@ -759,7 +762,7 @@ static struct clk * __init create_one_cmux(struct clockgen *cg, int idx) struct mux_hwclock *hwc; const struct clockgen_pll_div *div; unsigned long plat_rate, min_rate; - u64 pct80_rate; + u64 max_rate, pct80_rate; u32 clksel; hwc = kzalloc(sizeof(*hwc), GFP_KERNEL); @@ -787,8 +790,8 @@ static struct clk * __init create_one_cmux(struct clockgen *cg, int idx) return NULL; } - pct80_rate = clk_get_rate(div->clk); - pct80_rate *= 8; + max_rate = clk_get_rate(div->clk); + pct80_rate = max_rate * 8; do_div(pct80_rate, 10); plat_rate = clk_get_rate(cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk); @@ -798,7 +801,7 @@ static struct clk * __init create_one_cmux(struct clockgen *cg, int idx) else min_rate = plat_rate / 2; - return create_mux_common(cg, hwc, &cmux_ops, min_rate, + return create_mux_common(cg, hwc, &cmux_ops, min_rate, max_rate, pct80_rate, "cg-cmux%d", idx); } @@ -813,7 +816,7 @@ static struct clk * __init create_one_hwaccel(struct clockgen *cg, int idx) hwc->reg = cg->regs + 0x20 * idx + 0x10; hwc->info = cg->info.hwaccel[idx]; - return create_mux_common(cg, hwc, &hwaccel_ops, 0, 0, + return create_mux_common(cg, hwc, &hwaccel_ops, 0, ULONG_MAX, 0, "cg-hwaccel%d", idx); } From a29e52a6e66f4c0c895e7083e4bad2e7957f1fb5 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 17 Sep 2016 15:54:13 +0000 Subject: [PATCH 073/224] clk: mmp: mmp2: fix return value check in mmp2_clk_init() Fix the retrn value check which testing the wrong variable in mmp2_clk_init(). Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver") Signed-off-by: Wei Yongjun Signed-off-by: Stephen Boyd --- drivers/clk/mmp/clk-of-mmp2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c index 3a51fff1b0e7..9adaf48aea23 100644 --- a/drivers/clk/mmp/clk-of-mmp2.c +++ b/drivers/clk/mmp/clk-of-mmp2.c @@ -313,7 +313,7 @@ static void __init mmp2_clk_init(struct device_node *np) } pxa_unit->apmu_base = of_iomap(np, 1); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apmu_base) { pr_err("failed to map apmu registers\n"); return; } From deab07261d54b4db7b627d38e0efac97f176c6d6 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 17 Sep 2016 15:54:28 +0000 Subject: [PATCH 074/224] clk: mmp: pxa168: fix return value check in pxa168_clk_init() Fix the retrn value check which testing the wrong variable in pxa168_clk_init(). Fixes: ab08aefcd12d ("clk: mmp: add pxa168 DT support for clock driver") Signed-off-by: Wei Yongjun Signed-off-by: Stephen Boyd --- drivers/clk/mmp/clk-of-pxa168.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/mmp/clk-of-pxa168.c b/drivers/clk/mmp/clk-of-pxa168.c index 87f2317b2a00..f110c02e83cb 100644 --- a/drivers/clk/mmp/clk-of-pxa168.c +++ b/drivers/clk/mmp/clk-of-pxa168.c @@ -262,7 +262,7 @@ static void __init pxa168_clk_init(struct device_node *np) } pxa_unit->apmu_base = of_iomap(np, 1); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apmu_base) { pr_err("failed to map apmu registers\n"); return; } From 10f2bfb092e3b49000526c02cfe8b2abbbdbb752 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 17 Sep 2016 15:55:56 +0000 Subject: [PATCH 075/224] clk: mmp: pxa910: fix return value check in pxa910_clk_init() Fix the retrn value check which testing the wrong variable in pxa910_clk_init(). Fixes: 2bc61da9f7ff ("clk: mmp: add pxa910 DT support for clock driver") Signed-off-by: Wei Yongjun Signed-off-by: Stephen Boyd --- drivers/clk/mmp/clk-of-pxa910.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/mmp/clk-of-pxa910.c b/drivers/clk/mmp/clk-of-pxa910.c index e22a67f76d93..64d1ef49caeb 100644 --- a/drivers/clk/mmp/clk-of-pxa910.c +++ b/drivers/clk/mmp/clk-of-pxa910.c @@ -282,7 +282,7 @@ static void __init pxa910_clk_init(struct device_node *np) } pxa_unit->apmu_base = of_iomap(np, 1); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apmu_base) { pr_err("failed to map apmu registers\n"); return; } @@ -294,7 +294,7 @@ static void __init pxa910_clk_init(struct device_node *np) } pxa_unit->apbcp_base = of_iomap(np, 3); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apbcp_base) { pr_err("failed to map apbcp registers\n"); return; } From ceb75787bc75d0a7b88519ab8a68067ac690f55a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 1 Nov 2016 11:49:56 +0100 Subject: [PATCH 076/224] PM / sleep: fix device reference leak in test_suspend Make sure to drop the reference taken by class_find_device() after opening the RTC device. Fixes: 77437fd4e61f (pm: boot time suspend selftest) Signed-off-by: Johan Hovold Signed-off-by: Rafael J. Wysocki --- kernel/power/suspend_test.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/power/suspend_test.c b/kernel/power/suspend_test.c index 084452e34a12..bdff5ed57f10 100644 --- a/kernel/power/suspend_test.c +++ b/kernel/power/suspend_test.c @@ -203,8 +203,10 @@ static int __init test_suspend(void) /* RTCs have initialized by now too ... can we use one? */ dev = class_find_device(rtc_class, NULL, NULL, has_wakealarm); - if (dev) + if (dev) { rtc = rtc_class_open(dev_name(dev)); + put_device(dev); + } if (!rtc) { printk(warn_no_rtc); return 0; From 8d23ea403044efe97553dd64228b172c8ffca047 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Tue, 25 Oct 2016 12:17:59 +0530 Subject: [PATCH 077/224] drm/msm/dsi: Queue HPD helper work in attach/detach callbacks The msm/dsi host drivers calls drm_helper_hpd_irq_event in the mipi_dsi_host attach/detatch callbacks. mipi_dsi_attach()/mipi_dsi_detach() from a panel/bridge driver could be called from a context where the drm_device's mode_config.mutex is already held, resulting in a deadlock. Queue it as work instead. Signed-off-by: Archit Taneja Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi_host.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index f05ed0e1f3d6..6f240021705b 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -139,6 +139,7 @@ struct msm_dsi_host { u32 err_work_state; struct work_struct err_work; + struct work_struct hpd_work; struct workqueue_struct *workqueue; /* DSI 6G TX buffer*/ @@ -1294,6 +1295,14 @@ static void dsi_sw_reset_restore(struct msm_dsi_host *msm_host) wmb(); /* make sure dsi controller enabled again */ } +static void dsi_hpd_worker(struct work_struct *work) +{ + struct msm_dsi_host *msm_host = + container_of(work, struct msm_dsi_host, hpd_work); + + drm_helper_hpd_irq_event(msm_host->dev); +} + static void dsi_err_worker(struct work_struct *work) { struct msm_dsi_host *msm_host = @@ -1480,7 +1489,7 @@ static int dsi_host_attach(struct mipi_dsi_host *host, DBG("id=%d", msm_host->id); if (msm_host->dev) - drm_helper_hpd_irq_event(msm_host->dev); + queue_work(msm_host->workqueue, &msm_host->hpd_work); return 0; } @@ -1494,7 +1503,7 @@ static int dsi_host_detach(struct mipi_dsi_host *host, DBG("id=%d", msm_host->id); if (msm_host->dev) - drm_helper_hpd_irq_event(msm_host->dev); + queue_work(msm_host->workqueue, &msm_host->hpd_work); return 0; } @@ -1748,6 +1757,7 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi) /* setup workqueue */ msm_host->workqueue = alloc_ordered_workqueue("dsi_drm_work", 0); INIT_WORK(&msm_host->err_work, dsi_err_worker); + INIT_WORK(&msm_host->hpd_work, dsi_hpd_worker); msm_dsi->host = &msm_host->base; msm_dsi->id = msm_host->id; From 73b65b197024f3f9ef16a28cc9533c011e0a3f6d Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 27 Oct 2016 11:57:15 +0530 Subject: [PATCH 078/224] drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks The DSI/HDMI PLLs in MSM require resources like interface clocks, power domains to be enabled before we can access their registers. The clock framework doesn't have a mechanism at the moment where we can tie such resources to a clock, so we make sure that the KMS driver enables these resources whenever a PLL is expected to be in use. One place where we can't ensure the resource dependencies are met is when the clock framework tries to disable unused clocks. The KMS driver doesn't know when the clock framework calls the is_enabled clk_op, and hence can't enable interface clocks/power domains beforehand. We set the CLK_IGNORE_UNUSED flag for PLL clocks for now. This needs to be revisited, since bootloaders can enable display, and we would want to disable the PLL clocks if there isn't a display driver using them. Cc: Stephen Boyd Signed-off-by: Archit Taneja Acked-by: Stephen Boyd Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 1 + drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 1 + drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c | 1 + drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c | 1 + 4 files changed, 4 insertions(+) diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c index 598fdaff0a41..26e3a01a99c2 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c @@ -521,6 +521,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) .parent_names = (const char *[]){ "xo" }, .num_parents = 1, .name = vco_name, + .flags = CLK_IGNORE_UNUSED, .ops = &clk_ops_dsi_pll_28nm_vco, }; struct device *dev = &pll_28nm->pdev->dev; diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c index 38c90e1eb002..49008451085b 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c @@ -412,6 +412,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) struct clk_init_data vco_init = { .parent_names = (const char *[]){ "pxo" }, .num_parents = 1, + .flags = CLK_IGNORE_UNUSED, .ops = &clk_ops_dsi_pll_28nm_vco, }; struct device *dev = &pll_28nm->pdev->dev; diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c index aa94a553794f..143eab46ba68 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c @@ -702,6 +702,7 @@ static struct clk_init_data pll_init = { .ops = &hdmi_8996_pll_ops, .parent_names = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), + .flags = CLK_IGNORE_UNUSED, }; int msm_hdmi_pll_8996_init(struct platform_device *pdev) diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c index 92da69aa6187..99590758c68b 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c @@ -424,6 +424,7 @@ static struct clk_init_data pll_init = { .ops = &hdmi_pll_ops, .parent_names = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), + .flags = CLK_IGNORE_UNUSED, }; int msm_hdmi_pll_8960_init(struct platform_device *pdev) From 31e4801aa2e59d4b42dc0fd42846a3aa7a6361af Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 13 Oct 2016 12:43:17 -0400 Subject: [PATCH 079/224] drm/msm/mdp5: handle non-fullscreen base plane case If the bottom-most layer is not fullscreen, we need to use the BASE mixer stage for solid fill (ie. MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT). The blend_setup() code pretty much handled this already, we just had to figure this out in _atomic_check() and assign the stages appropriately. Also fix the case where there are zero enabled planes, where we also need to enable BORDER_OUT. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 46 ++++++++++++++---------- 1 file changed, 28 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c index fa2be7ce9468..c205c360e16d 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c @@ -223,12 +223,7 @@ static void blend_setup(struct drm_crtc *crtc) plane_cnt++; } - /* - * If there is no base layer, enable border color. - * Although it's not possbile in current blend logic, - * put it here as a reminder. - */ - if (!pstates[STAGE_BASE] && plane_cnt) { + if (!pstates[STAGE_BASE]) { ctl_blend_flags |= MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT; DBG("Border Color is enabled"); } @@ -365,6 +360,15 @@ static int pstate_cmp(const void *a, const void *b) return pa->state->zpos - pb->state->zpos; } +/* is there a helper for this? */ +static bool is_fullscreen(struct drm_crtc_state *cstate, + struct drm_plane_state *pstate) +{ + return (pstate->crtc_x <= 0) && (pstate->crtc_y <= 0) && + ((pstate->crtc_x + pstate->crtc_w) >= cstate->mode.hdisplay) && + ((pstate->crtc_y + pstate->crtc_h) >= cstate->mode.vdisplay); +} + static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, struct drm_crtc_state *state) { @@ -375,21 +379,11 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, struct plane_state pstates[STAGE_MAX + 1]; const struct mdp5_cfg_hw *hw_cfg; const struct drm_plane_state *pstate; - int cnt = 0, i; + int cnt = 0, base = 0, i; DBG("%s: check", mdp5_crtc->name); - /* verify that there are not too many planes attached to crtc - * and that we don't have conflicting mixer stages: - */ - hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) { - if (cnt >= (hw_cfg->lm.nb_stages)) { - dev_err(dev->dev, "too many planes!\n"); - return -EINVAL; - } - - pstates[cnt].plane = plane; pstates[cnt].state = to_mdp5_plane_state(pstate); @@ -399,8 +393,24 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, /* assign a stage based on sorted zpos property */ sort(pstates, cnt, sizeof(pstates[0]), pstate_cmp, NULL); + /* if the bottom-most layer is not fullscreen, we need to use + * it for solid-color: + */ + if ((cnt > 0) && !is_fullscreen(state, &pstates[0].state->base)) + base++; + + /* verify that there are not too many planes attached to crtc + * and that we don't have conflicting mixer stages: + */ + hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); + + if ((cnt + base) >= hw_cfg->lm.nb_stages) { + dev_err(dev->dev, "too many planes!\n"); + return -EINVAL; + } + for (i = 0; i < cnt; i++) { - pstates[i].state->stage = STAGE_BASE + i; + pstates[i].state->stage = STAGE_BASE + i + base; DBG("%s: assign pipe %s on stage=%d", mdp5_crtc->name, pipe2name(mdp5_plane_pipe(pstates[i].plane)), pstates[i].state->stage); From 07cd2e36263af34f7f0b48e36eff5d4b77d5756a Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 17 Oct 2016 12:00:21 -0400 Subject: [PATCH 080/224] drm/msm/mdp5: no scaling support on RGBn pipes for 8x16 Looks like cut/paste error from the other device cfgs (which do support scaling on RGBn pipes). Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 2 +- drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 9 +++------ 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index ac9e4cde1380..0e2bc5636c81 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -272,7 +272,7 @@ const struct mdp5_cfg_hw msm8x16_config = { .count = 2, .base = { 0x14000, 0x16000 }, .caps = MDP_PIPE_CAP_HFLIP | MDP_PIPE_CAP_VFLIP | - MDP_PIPE_CAP_SCALE | MDP_PIPE_CAP_DECIMATION, + MDP_PIPE_CAP_DECIMATION, }, .pipe_dma = { .count = 1, diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c index 951c002b05df..83bf997dda03 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c @@ -292,8 +292,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, format = to_mdp_format(msm_framebuffer_format(state->fb)); if (MDP_FORMAT_IS_YUV(format) && !pipe_supports_yuv(mdp5_plane->caps)) { - dev_err(plane->dev->dev, - "Pipe doesn't support YUV\n"); + DBG("Pipe doesn't support YUV\n"); return -EINVAL; } @@ -301,8 +300,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, if (!(mdp5_plane->caps & MDP_PIPE_CAP_SCALE) && (((state->src_w >> 16) != state->crtc_w) || ((state->src_h >> 16) != state->crtc_h))) { - dev_err(plane->dev->dev, - "Pipe doesn't support scaling (%dx%d -> %dx%d)\n", + DBG("Pipe doesn't support scaling (%dx%d -> %dx%d)\n", state->src_w >> 16, state->src_h >> 16, state->crtc_w, state->crtc_h); @@ -313,8 +311,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, vflip = !!(state->rotation & DRM_REFLECT_Y); if ((vflip && !(mdp5_plane->caps & MDP_PIPE_CAP_VFLIP)) || (hflip && !(mdp5_plane->caps & MDP_PIPE_CAP_HFLIP))) { - dev_err(plane->dev->dev, - "Pipe doesn't support flip\n"); + DBG("Pipe doesn't support flip\n"); return -EINVAL; } From 67cba0fbb484bbc1af42f2804662a80008ba61e9 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 24 Oct 2016 11:46:44 -0400 Subject: [PATCH 081/224] drm/msm/mdp5: 8x16 actually has 8 mixer stages Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index 0e2bc5636c81..8b4e3004f451 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -282,7 +282,7 @@ const struct mdp5_cfg_hw msm8x16_config = { .lm = { .count = 2, /* LM0 and LM3 */ .base = { 0x44000, 0x47000 }, - .nb_stages = 5, + .nb_stages = 8, .max_width = 2048, .max_height = 0xFFFF, }, From a4513320423a388ed55eb0754353f46b10d05a99 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 2 Nov 2016 12:03:03 +0100 Subject: [PATCH 082/224] ASoC: samsung: spdif: Fix DMA filter initialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes issues introduced in commit 73f5dfc68316bef2ab7062ec "ASoC: samsung: get access to DMA engine early to defer probe properly" and indicated by a following compilation warning: CC [M] sound/soc/samsung/spdif.o sound/soc/samsung/spdif.c: In function ‘spdif_probe’: sound/soc/samsung/spdif.c:419:6: warning: ‘filter’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Sylwester Nawrocki Signed-off-by: Mark Brown --- sound/soc/samsung/spdif.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c index 704b7b12bf8b..779504f54bc0 100644 --- a/sound/soc/samsung/spdif.c +++ b/sound/soc/samsung/spdif.c @@ -416,6 +416,15 @@ static int spdif_probe(struct platform_device *pdev) goto err3; } + spdif_stereo_out.addr_width = 2; + spdif_stereo_out.addr = mem_res->start + DATA_OUTBUF; + filter = NULL; + if (spdif_pdata) { + spdif_stereo_out.filter_data = spdif_pdata->dma_playback; + filter = spdif_pdata->dma_filter; + } + spdif->dma_playback = &spdif_stereo_out; + ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, NULL, NULL); if (ret) { @@ -432,16 +441,6 @@ static int spdif_probe(struct platform_device *pdev) goto err4; } - spdif_stereo_out.addr_width = 2; - spdif_stereo_out.addr = mem_res->start + DATA_OUTBUF; - filter = NULL; - if (spdif_pdata) { - spdif_stereo_out.filter_data = spdif_pdata->dma_playback; - filter = spdif_pdata->dma_filter; - } - - spdif->dma_playback = &spdif_stereo_out; - return 0; err4: iounmap(spdif->regs); From a79a812131b07254c09cf325ec68c0d05aaed0b5 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Thu, 3 Nov 2016 18:06:13 +0300 Subject: [PATCH 083/224] arc: Implement arch-specific dma_map_ops.mmap We used to use generic implementation of dma_map_ops.mmap which is dma_common_mmap() but that only worked for simpler cached mappings when vaddr = paddr. If a driver requests uncached DMA buffer kernel maps it to virtual address so that MMU gets involved and page uncached status takes into account. In that case usage of dma_common_mmap() lead to mapping of vaddr to vaddr for user-space which is obviously wrong. For more detals please refer to verbose explanation here [1]. So here we implement our own version of mmap() which always deals with dma_addr and maps underlying memory to user-space properly (note that DMA buffer mapped to user-space is always uncached because there's no way to properly manage cache from user-space). [1] https://lkml.org/lkml/2016/10/26/973 Reviewed-by: Catalin Marinas Cc: Marek Szyprowski Cc: #4.5+ Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/mm/dma.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c index 60aab5a7522b..cd8aad8226dd 100644 --- a/arch/arc/mm/dma.c +++ b/arch/arc/mm/dma.c @@ -105,6 +105,31 @@ static void arc_dma_free(struct device *dev, size_t size, void *vaddr, __free_pages(page, get_order(size)); } +static int arc_dma_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size, + unsigned long attrs) +{ + unsigned long user_count = vma_pages(vma); + unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT; + unsigned long pfn = __phys_to_pfn(plat_dma_to_phys(dev, dma_addr)); + unsigned long off = vma->vm_pgoff; + int ret = -ENXIO; + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret)) + return ret; + + if (off < count && user_count <= (count - off)) { + ret = remap_pfn_range(vma, vma->vm_start, + pfn + off, + user_count << PAGE_SHIFT, + vma->vm_page_prot); + } + + return ret; +} + /* * streaming DMA Mapping API... * CPU accesses page via normal paddr, thus needs to explicitly made @@ -193,6 +218,7 @@ static int arc_dma_supported(struct device *dev, u64 dma_mask) struct dma_map_ops arc_dma_ops = { .alloc = arc_dma_alloc, .free = arc_dma_free, + .mmap = arc_dma_mmap, .map_page = arc_dma_map_page, .map_sg = arc_dma_map_sg, .sync_single_for_device = arc_dma_sync_single_for_device, From 5459ada2b3cd69e6bf1b0c034feb810975d0072b Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Thu, 27 Oct 2016 16:49:20 -0700 Subject: [PATCH 084/224] HID: sensor-hub: Fix packing of result buffer for feature report When report count is more than one and report size is not 4 bytes, then we need some packing into result buffer from the caller of function sensor_hub_get_feature. By default the value extracted from a field is 4 bytes from hid core (using hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT)), even if report size if less than 4 byte. So when we copy data to user buffer in sensor_hub_get_feature, we need to only copy report size bytes even when report count is more than 1. This is not an issue for most of the sensor hub fields as report count will be 1 where we already copy only report size bytes, but some string fields like description, it is a problem as the report count will be more than 1. For example: Field(6) Physical(Sensor.OtherCustom) Application(Sensor.Sensor) Usage(11) Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Report Size(16) Report Count(11) Here since the report size is 2 bytes, we will have 2 additional bytes of 0s copied into user buffer, if we directly copy to user buffer from report->field[]->value This change will copy report size bytes into the buffer of caller for each usage report->field[]->value. So for example without this change, the data displayed for a custom sensor field "sensor-model": 76 00 101 00 110 00 111 00 118 00 111 (truncated to report count of 11) With change 76 101 110 111 118 111 32 89 111 103 97 ("Lenovo Yoga" in ASCII ) Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-hub.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index 658a607dc6d9..c5c3d6111729 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -251,6 +251,9 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev); int report_size; int ret = 0; + u8 *val_ptr; + int buffer_index = 0; + int i; mutex_lock(&data->mutex); report = sensor_hub_report(report_id, hsdev->hdev, HID_FEATURE_REPORT); @@ -271,7 +274,17 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, goto done_proc; } ret = min(report_size, buffer_size); - memcpy(buffer, report->field[field_index]->value, ret); + + val_ptr = (u8 *)report->field[field_index]->value; + for (i = 0; i < report->field[field_index]->report_count; ++i) { + if (buffer_index >= ret) + break; + + memcpy(&((u8 *)buffer)[buffer_index], val_ptr, + report->field[field_index]->report_size / 8); + val_ptr += sizeof(__s32); + buffer_index += (report->field[field_index]->report_size / 8); + } done_proc: mutex_unlock(&data->mutex); From 1793e1c5217c2dc447d79720399a1d4e60c47761 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 29 Oct 2016 13:17:40 +0200 Subject: [PATCH 085/224] HID: intel-ish-hid: Fix !CONFIG_PM build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix drivers/hid/intel-ish-hid/ipc/pci-ish.c:247:12: warning: ‘ish_suspend’ defined but not used [-Wunused-function] static int ish_suspend(struct device *device) ^ drivers/hid/intel-ish-hid/ipc/pci-ish.c:282:12: warning: ‘ish_resume’ defined but not used [-Wunused-function] static int ish_resume(struct device *device) ^ by sticking them in the CONFIG_PM range too. Signed-off-by: Borislav Petkov Cc: Srinivas Pandruvada Cc: Jiri Kosina Cc: Benjamin Tissoires Cc: Wei Yongjun Cc: linux-input@vger.kernel.org Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/pci-ish.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 42f0beeb09fd..7e3622a724aa 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -202,6 +202,7 @@ static void ish_remove(struct pci_dev *pdev) kfree(ishtp_dev); } +#ifdef CONFIG_PM static struct device *ish_resume_device; /** @@ -293,7 +294,6 @@ static int ish_resume(struct device *device) return 0; } -#ifdef CONFIG_PM static const struct dev_pm_ops ish_pm_ops = { .suspend = ish_suspend, .resume = ish_resume, @@ -301,7 +301,7 @@ static const struct dev_pm_ops ish_pm_ops = { #define ISHTP_ISH_PM_OPS (&ish_pm_ops) #else #define ISHTP_ISH_PM_OPS NULL -#endif +#endif /* CONFIG_PM */ static struct pci_driver ish_driver = { .name = KBUILD_MODNAME, From cf0ea4da4c7df11f7a508b2f37518e0f117f3791 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 3 Nov 2016 12:31:41 +0100 Subject: [PATCH 086/224] HID: usbhid: add ATEN CS962 to list of quirky devices Like many similar devices it needs a quirk to work. Issuing the request gets the device into an irrecoverable state. Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 6cfb5cacc253..575aa65436d1 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -179,6 +179,7 @@ #define USB_DEVICE_ID_ATEN_4PORTKVM 0x2205 #define USB_DEVICE_ID_ATEN_4PORTKVMC 0x2208 #define USB_DEVICE_ID_ATEN_CS682 0x2213 +#define USB_DEVICE_ID_ATEN_CS692 0x8021 #define USB_VENDOR_ID_ATMEL 0x03eb #define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 354d49ea36dd..e6cfd323babc 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -63,6 +63,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS682, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS692, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FIGHTERSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET }, From 16976085a114ae293c6fa7a463d74600ffcfeb4b Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 3 Nov 2016 17:36:18 +0530 Subject: [PATCH 087/224] drm/msm: Fix error handling crashes seen when VRAM allocation fails If VRAM allocation fails, the error handling path crashes in msm_drm_uninit(). The following changes are made to fix this: msm_gem_shrinker_cleanup() is fixed to unregister the shrinker only if it was init-ed in the first place. Before calling kms->funcs->destroy(), we check if kms->funcs is also non-NULL. This is needed for MDP5, since during msm_drm_int(), priv->kms becomes non-NULL early, but msm_kms_init() is called on it only later in mdp5_kms_init(). Signed-off-by: Archit Taneja Signed-off-by: Rob Clark Reviewed-by: Andy Gross --- drivers/gpu/drm/msm/msm_drv.c | 2 +- drivers/gpu/drm/msm/msm_gem_shrinker.c | 7 +++++-- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index fb5c0b0a7594..46568fc80848 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -228,7 +228,7 @@ static int msm_drm_uninit(struct device *dev) flush_workqueue(priv->atomic_wq); destroy_workqueue(priv->atomic_wq); - if (kms) + if (kms && kms->funcs) kms->funcs->destroy(kms); if (gpu) { diff --git a/drivers/gpu/drm/msm/msm_gem_shrinker.c b/drivers/gpu/drm/msm/msm_gem_shrinker.c index 283d2841ba58..192b2d3a79cb 100644 --- a/drivers/gpu/drm/msm/msm_gem_shrinker.c +++ b/drivers/gpu/drm/msm/msm_gem_shrinker.c @@ -163,6 +163,9 @@ void msm_gem_shrinker_init(struct drm_device *dev) void msm_gem_shrinker_cleanup(struct drm_device *dev) { struct msm_drm_private *priv = dev->dev_private; - WARN_ON(unregister_vmap_purge_notifier(&priv->vmap_notifier)); - unregister_shrinker(&priv->shrinker); + + if (priv->shrinker.nr_deferred) { + WARN_ON(unregister_vmap_purge_notifier(&priv->vmap_notifier)); + unregister_shrinker(&priv->shrinker); + } } From 94d0e5980d6791b9f98a9b6c586c1f7cb76b2178 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 18 Oct 2016 18:37:49 +0100 Subject: [PATCH 088/224] arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU Architecturally, TLBs are private to the (physical) CPU they're associated with. But when multiple vcpus from the same VM are being multiplexed on the same CPU, the TLBs are not private to the vcpus (and are actually shared across the VMID). Let's consider the following scenario: - vcpu-0 maps PA to VA - vcpu-1 maps PA' to VA If run on the same physical CPU, vcpu-1 can hit TLB entries generated by vcpu-0 accesses, and access the wrong physical page. The solution to this is to keep a per-VM map of which vcpu ran last on each given physical CPU, and invalidate local TLBs when switching to a different vcpu from the same VM. Reviewed-by: Christoffer Dall Signed-off-by: Marc Zyngier --- arch/arm/include/asm/kvm_asm.h | 1 + arch/arm/include/asm/kvm_host.h | 3 +++ arch/arm/include/asm/kvm_hyp.h | 1 + arch/arm/kvm/arm.c | 27 ++++++++++++++++++++++++++- arch/arm/kvm/hyp/tlb.c | 15 +++++++++++++++ arch/arm64/include/asm/kvm_asm.h | 1 + arch/arm64/include/asm/kvm_host.h | 3 +++ arch/arm64/include/asm/kvm_mmu.h | 2 +- arch/arm64/kvm/hyp/tlb.c | 15 +++++++++++++++ 9 files changed, 66 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index d7ea6bcb29bf..8ef05381984b 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -66,6 +66,7 @@ extern char __kvm_hyp_vector[]; extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); +extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 2d19e02d03fd..d5423ab15ed5 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -57,6 +57,9 @@ struct kvm_arch { /* VTTBR value associated with below pgd and vmid */ u64 vttbr; + /* The last vcpu id that ran on each physical CPU */ + int __percpu *last_vcpu_ran; + /* Timer */ struct arch_timer_kvm timer; diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h index 343135ede5fa..58508900c4bb 100644 --- a/arch/arm/include/asm/kvm_hyp.h +++ b/arch/arm/include/asm/kvm_hyp.h @@ -71,6 +71,7 @@ #define ICIALLUIS __ACCESS_CP15(c7, 0, c1, 0) #define ATS1CPR __ACCESS_CP15(c7, 0, c8, 0) #define TLBIALLIS __ACCESS_CP15(c8, 0, c3, 0) +#define TLBIALL __ACCESS_CP15(c8, 0, c7, 0) #define TLBIALLNSNHIS __ACCESS_CP15(c8, 4, c3, 4) #define PRRR __ACCESS_CP15(c10, 0, c2, 0) #define NMRR __ACCESS_CP15(c10, 0, c2, 1) diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 08bb84f2ad58..19b5f5c1c0ff 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -114,11 +114,18 @@ void kvm_arch_check_processor_compat(void *rtn) */ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) { - int ret = 0; + int ret, cpu; if (type) return -EINVAL; + kvm->arch.last_vcpu_ran = alloc_percpu(typeof(*kvm->arch.last_vcpu_ran)); + if (!kvm->arch.last_vcpu_ran) + return -ENOMEM; + + for_each_possible_cpu(cpu) + *per_cpu_ptr(kvm->arch.last_vcpu_ran, cpu) = -1; + ret = kvm_alloc_stage2_pgd(kvm); if (ret) goto out_fail_alloc; @@ -141,6 +148,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) out_free_stage2_pgd: kvm_free_stage2_pgd(kvm); out_fail_alloc: + free_percpu(kvm->arch.last_vcpu_ran); + kvm->arch.last_vcpu_ran = NULL; return ret; } @@ -168,6 +177,9 @@ void kvm_arch_destroy_vm(struct kvm *kvm) { int i; + free_percpu(kvm->arch.last_vcpu_ran); + kvm->arch.last_vcpu_ran = NULL; + for (i = 0; i < KVM_MAX_VCPUS; ++i) { if (kvm->vcpus[i]) { kvm_arch_vcpu_free(kvm->vcpus[i]); @@ -312,6 +324,19 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) { + int *last_ran; + + last_ran = this_cpu_ptr(vcpu->kvm->arch.last_vcpu_ran); + + /* + * We might get preempted before the vCPU actually runs, but + * over-invalidation doesn't affect correctness. + */ + if (*last_ran != vcpu->vcpu_id) { + kvm_call_hyp(__kvm_tlb_flush_local_vmid, vcpu); + *last_ran = vcpu->vcpu_id; + } + vcpu->cpu = cpu; vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state); diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c index 729652854f90..6d810af2d9fd 100644 --- a/arch/arm/kvm/hyp/tlb.c +++ b/arch/arm/kvm/hyp/tlb.c @@ -55,6 +55,21 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) __kvm_tlb_flush_vmid(kvm); } +void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) +{ + struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm); + + /* Switch to requested VMID */ + write_sysreg(kvm->arch.vttbr, VTTBR); + isb(); + + write_sysreg(0, TLBIALL); + dsb(nsh); + isb(); + + write_sysreg(0, VTTBR); +} + void __hyp_text __kvm_flush_vm_context(void) { write_sysreg(0, TLBIALLNSNHIS); diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index 18f746551bf6..ec3553eb9349 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -54,6 +54,7 @@ extern char __kvm_hyp_vector[]; extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); +extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index bd94e6766759..e5050388e062 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -62,6 +62,9 @@ struct kvm_arch { /* VTTBR value associated with above pgd and vmid */ u64 vttbr; + /* The last vcpu id that ran on each physical CPU */ + int __percpu *last_vcpu_ran; + /* The maximum number of vCPUs depends on the used GIC model */ int max_vcpus; diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index a79b969c26fc..6f72fe8b0e3e 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -128,7 +128,7 @@ static inline unsigned long __kern_hyp_va(unsigned long v) return v; } -#define kern_hyp_va(v) (typeof(v))(__kern_hyp_va((unsigned long)(v))) +#define kern_hyp_va(v) ((typeof(v))(__kern_hyp_va((unsigned long)(v)))) /* * We currently only support a 40bit IPA. diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c index 9cc0ea784ae6..88e2f2b938f0 100644 --- a/arch/arm64/kvm/hyp/tlb.c +++ b/arch/arm64/kvm/hyp/tlb.c @@ -64,6 +64,21 @@ void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm) write_sysreg(0, vttbr_el2); } +void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) +{ + struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm); + + /* Switch to requested VMID */ + write_sysreg(kvm->arch.vttbr, vttbr_el2); + isb(); + + asm volatile("tlbi vmalle1" : : ); + dsb(nsh); + isb(); + + write_sysreg(0, vttbr_el2); +} + void __hyp_text __kvm_flush_vm_context(void) { dsb(ishst); From 112b0b8f8f6e18d4695d21457961c0e1b322a1d7 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 1 Nov 2016 18:00:08 +0000 Subject: [PATCH 089/224] KVM: arm/arm64: vgic: Prevent access to invalid SPIs In our VGIC implementation we limit the number of SPIs to a number that the userland application told us. Accordingly we limit the allocation of memory for virtual IRQs to that number. However in our MMIO dispatcher we didn't check if we ever access an IRQ beyond that limit, leading to out-of-bound accesses. Add a test against the number of allocated SPIs in check_region(). Adjust the VGIC_ADDR_TO_INT macro to avoid an actual division, which is not implemented on ARM(32). [maz: cleaned-up original patch] Cc: stable@vger.kernel.org Reviewed-by: Christoffer Dall Signed-off-by: Andre Przywara Signed-off-by: Marc Zyngier --- virt/kvm/arm/vgic/vgic-mmio.c | 41 +++++++++++++++++++++++------------ virt/kvm/arm/vgic/vgic-mmio.h | 14 ++++++------ 2 files changed, 34 insertions(+), 21 deletions(-) diff --git a/virt/kvm/arm/vgic/vgic-mmio.c b/virt/kvm/arm/vgic/vgic-mmio.c index e18b30ddcdce..ebe1b9fa3c4d 100644 --- a/virt/kvm/arm/vgic/vgic-mmio.c +++ b/virt/kvm/arm/vgic/vgic-mmio.c @@ -453,17 +453,33 @@ struct vgic_io_device *kvm_to_vgic_iodev(const struct kvm_io_device *dev) return container_of(dev, struct vgic_io_device, dev); } -static bool check_region(const struct vgic_register_region *region, +static bool check_region(const struct kvm *kvm, + const struct vgic_register_region *region, gpa_t addr, int len) { - if ((region->access_flags & VGIC_ACCESS_8bit) && len == 1) - return true; - if ((region->access_flags & VGIC_ACCESS_32bit) && - len == sizeof(u32) && !(addr & 3)) - return true; - if ((region->access_flags & VGIC_ACCESS_64bit) && - len == sizeof(u64) && !(addr & 7)) - return true; + int flags, nr_irqs = kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS; + + switch (len) { + case sizeof(u8): + flags = VGIC_ACCESS_8bit; + break; + case sizeof(u32): + flags = VGIC_ACCESS_32bit; + break; + case sizeof(u64): + flags = VGIC_ACCESS_64bit; + break; + default: + return false; + } + + if ((region->access_flags & flags) && IS_ALIGNED(addr, len)) { + if (!region->bits_per_irq) + return true; + + /* Do we access a non-allocated IRQ? */ + return VGIC_ADDR_TO_INTID(addr, region->bits_per_irq) < nr_irqs; + } return false; } @@ -477,7 +493,7 @@ static int dispatch_mmio_read(struct kvm_vcpu *vcpu, struct kvm_io_device *dev, region = vgic_find_mmio_region(iodev->regions, iodev->nr_regions, addr - iodev->base_addr); - if (!region || !check_region(region, addr, len)) { + if (!region || !check_region(vcpu->kvm, region, addr, len)) { memset(val, 0, len); return 0; } @@ -510,10 +526,7 @@ static int dispatch_mmio_write(struct kvm_vcpu *vcpu, struct kvm_io_device *dev, region = vgic_find_mmio_region(iodev->regions, iodev->nr_regions, addr - iodev->base_addr); - if (!region) - return 0; - - if (!check_region(region, addr, len)) + if (!region || !check_region(vcpu->kvm, region, addr, len)) return 0; switch (iodev->iodev_type) { diff --git a/virt/kvm/arm/vgic/vgic-mmio.h b/virt/kvm/arm/vgic/vgic-mmio.h index 4c34d39d44a0..84961b4e4422 100644 --- a/virt/kvm/arm/vgic/vgic-mmio.h +++ b/virt/kvm/arm/vgic/vgic-mmio.h @@ -50,15 +50,15 @@ extern struct kvm_io_device_ops kvm_io_gic_ops; #define VGIC_ADDR_IRQ_MASK(bits) (((bits) * 1024 / 8) - 1) /* - * (addr & mask) gives us the byte offset for the INT ID, so we want to - * divide this with 'bytes per irq' to get the INT ID, which is given - * by '(bits) / 8'. But we do this with fixed-point-arithmetic and - * take advantage of the fact that division by a fraction equals - * multiplication with the inverted fraction, and scale up both the - * numerator and denominator with 8 to support at most 64 bits per IRQ: + * (addr & mask) gives us the _byte_ offset for the INT ID. + * We multiply this by 8 the get the _bit_ offset, then divide this by + * the number of bits to learn the actual INT ID. + * But instead of a division (which requires a "long long div" implementation), + * we shift by the binary logarithm of . + * This assumes that is a power of two. */ #define VGIC_ADDR_TO_INTID(addr, bits) (((addr) & VGIC_ADDR_IRQ_MASK(bits)) * \ - 64 / (bits) / 8) + 8 >> ilog2(bits)) /* * Some VGIC registers store per-IRQ information, with a different number From d42c79701a3ee5c38fbbc82f98a140420bd40134 Mon Sep 17 00:00:00 2001 From: Shih-Wei Li Date: Thu, 27 Oct 2016 15:08:13 +0000 Subject: [PATCH 090/224] KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs In cases like IPI, we could be queueing an interrupt for a VCPU that is already running and is not about to exit, because the VCPU has entered the VM with the interrupt pending and would not trap on EOI'ing that interrupt. This could result to delays in interrupt deliveries or even loss of interrupts. To guarantee prompt interrupt injection, here we have to try to kick the VCPU. Signed-off-by: Shih-Wei Li Reviewed-by: Christoffer Dall Signed-off-by: Marc Zyngier --- virt/kvm/arm/vgic/vgic.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c index 2893d5ba523a..6440b56ec90e 100644 --- a/virt/kvm/arm/vgic/vgic.c +++ b/virt/kvm/arm/vgic/vgic.c @@ -273,6 +273,18 @@ bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq) * no more work for us to do. */ spin_unlock(&irq->irq_lock); + + /* + * We have to kick the VCPU here, because we could be + * queueing an edge-triggered interrupt for which we + * get no EOI maintenance interrupt. In that case, + * while the IRQ is already on the VCPU's AP list, the + * VCPU could have EOI'ed the original interrupt and + * won't see this one until it exits for some other + * reason. + */ + if (vcpu) + kvm_vcpu_kick(vcpu); return false; } From 56211121c0825cd188caad05574fdc518d5cac6f Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 31 Oct 2016 16:57:32 +0200 Subject: [PATCH 091/224] pinctrl: cherryview: Serialize register access in suspend/resume If async suspend is enabled, the driver may access registers concurrently with another instance which may fail because of the bug in Cherryview GPIO hardware. Prevent this by taking the shared lock while accessing the hardware in suspend and resume hooks. Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cherryview.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index 30389f4ccab4..097d835b3a50 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -1656,8 +1656,11 @@ static int chv_pinctrl_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); + unsigned long flags; int i; + raw_spin_lock_irqsave(&chv_lock, flags); + pctrl->saved_intmask = readl(pctrl->regs + CHV_INTMASK); for (i = 0; i < pctrl->community->npins; i++) { @@ -1678,6 +1681,8 @@ static int chv_pinctrl_suspend(struct device *dev) ctx->padctrl1 = readl(reg); } + raw_spin_unlock_irqrestore(&chv_lock, flags); + return 0; } @@ -1685,8 +1690,11 @@ static int chv_pinctrl_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); + unsigned long flags; int i; + raw_spin_lock_irqsave(&chv_lock, flags); + /* * Mask all interrupts before restoring per-pin configuration * registers because we don't know in which state BIOS left them @@ -1731,6 +1739,8 @@ static int chv_pinctrl_resume(struct device *dev) chv_writel(0xffff, pctrl->regs + CHV_INTSTAT); chv_writel(pctrl->saved_intmask, pctrl->regs + CHV_INTMASK); + raw_spin_unlock_irqrestore(&chv_lock, flags); + return 0; } #endif From d2cdf5dc58f6970e9d9d26e47974c21fe87983f3 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 31 Oct 2016 16:57:33 +0200 Subject: [PATCH 092/224] pinctrl: cherryview: Prevent possible interrupt storm on resume When the system is suspended to S3 the BIOS might re-initialize certain GPIO pins back to their original state or it may re-program interrupt mask of others. For example Acer TravelMate B116-M had BIOS bug where certain GPIO pin (MF_ISH_GPIO_5) was programmed to trigger on high level, and the pin state was high once the BIOS gave control to the OS on resume. This triggers lots of messages like: irq 117, desc: ffff88017a61e600, depth: 1, count: 0, unhandled: 0 ->handle_irq(): ffffffff8109b613, handle_bad_irq+0x0/0x1e0 ->irq_data.chip(): ffffffffa0020180, chv_pinctrl_exit+0x2d84/0x12 [pinctrl_cherryview] ->action(): (null) IRQ_NOPROBE set We reset the mask back to known state in chv_pinctrl_resume() but that is called only after device interrupts have already been enabled. Now, this particular issue was fixed by upgrading the BIOS to the latest (v1.23) but not everybody upgrades their BIOSes so we fix it up in the driver as well. Prevent the possible interrupt storm by moving suspend and resume hooks to be called at _noirq time instead. Since device interrupts are still disabled we can restore the mask back to known state before interrupt storm happens. Cc: stable@vger.kernel.org Reported-by: Christian Steiner Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cherryview.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index 097d835b3a50..c43b1e9a06af 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -1652,7 +1652,7 @@ static int chv_pinctrl_probe(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP -static int chv_pinctrl_suspend(struct device *dev) +static int chv_pinctrl_suspend_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); @@ -1686,7 +1686,7 @@ static int chv_pinctrl_suspend(struct device *dev) return 0; } -static int chv_pinctrl_resume(struct device *dev) +static int chv_pinctrl_resume_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); @@ -1746,7 +1746,8 @@ static int chv_pinctrl_resume(struct device *dev) #endif static const struct dev_pm_ops chv_pinctrl_pm_ops = { - SET_LATE_SYSTEM_SLEEP_PM_OPS(chv_pinctrl_suspend, chv_pinctrl_resume) + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(chv_pinctrl_suspend_noirq, + chv_pinctrl_resume_noirq) }; static const struct acpi_device_id chv_pinctrl_acpi_match[] = { From 98430c7aad6a3fdedcc78a0d6780dabb6580dc38 Mon Sep 17 00:00:00 2001 From: Randy Li Date: Tue, 25 Oct 2016 22:15:34 +0800 Subject: [PATCH 093/224] phy: Add reset callback for not generic phy Add a dummy function for phy_reset in case the CONFIG_GENERIC_PHY is disabled. Signed-off-by: Randy Li Signed-off-by: Kishon Vijay Abraham I --- include/linux/phy/phy.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index ee1bed7dbfc6..78bb0d7f6b11 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -253,6 +253,13 @@ static inline int phy_set_mode(struct phy *phy, enum phy_mode mode) return -ENOSYS; } +static inline int phy_reset(struct phy *phy) +{ + if (!phy) + return 0; + return -ENOSYS; +} + static inline int phy_get_bus_width(struct phy *phy) { return -ENOSYS; From 766325427fdb2a6816778b39331637761bccf13a Mon Sep 17 00:00:00 2001 From: Axel Haslam Date: Thu, 3 Nov 2016 17:03:07 +0100 Subject: [PATCH 094/224] phy: da8xx-usb: rename the ohci device to ohci-da8xx The ohci device name has changed in the board configuraion files, hence, change the phy lookup table to match the new name. Signed-off-by: Axel Haslam Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-da8xx-usb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c index 32ae78c8ca17..c85fb0b59729 100644 --- a/drivers/phy/phy-da8xx-usb.c +++ b/drivers/phy/phy-da8xx-usb.c @@ -198,7 +198,8 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev) } else { int ret; - ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0"); + ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", + "ohci-da8xx"); if (ret) dev_warn(dev, "Failed to create usb11 phy lookup\n"); ret = phy_create_lookup(d_phy->usb20_phy, "usb-phy", @@ -216,7 +217,7 @@ static int da8xx_usb_phy_remove(struct platform_device *pdev) if (!pdev->dev.of_node) { phy_remove_lookup(d_phy->usb20_phy, "usb-phy", "musb-da8xx"); - phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0"); + phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci-da8xx"); } return 0; From 232c260982ab0100cbb29055933e45b928252687 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Thu, 13 Oct 2016 12:42:13 +0800 Subject: [PATCH 095/224] phy-rockchip-pcie: remove deassert of phy_rst from exit callback The deassert of phy_rst from exit callback is incorrect as when doing phy_exit, we expect the phy_rst is on asserted state which was done by power_off callback, but not deasserted state. Meanwhile when disabling clk_pciephy_ref, the assert/deassert signal can't actually take effect on the phy. So let's fix it anyway. Signed-off-by: Shawn Lin Reviewed-by: Heiko Stuebner Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-rockchip-pcie.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/phy/phy-rockchip-pcie.c b/drivers/phy/phy-rockchip-pcie.c index a2b4c6b58aea..6904633cad68 100644 --- a/drivers/phy/phy-rockchip-pcie.c +++ b/drivers/phy/phy-rockchip-pcie.c @@ -249,21 +249,10 @@ static int rockchip_pcie_phy_init(struct phy *phy) static int rockchip_pcie_phy_exit(struct phy *phy) { struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy); - int err = 0; clk_disable_unprepare(rk_phy->clk_pciephy_ref); - err = reset_control_deassert(rk_phy->phy_rst); - if (err) { - dev_err(&phy->dev, "deassert phy_rst err %d\n", err); - goto err_reset; - } - - return err; - -err_reset: - clk_prepare_enable(rk_phy->clk_pciephy_ref); - return err; + return 0; } static const struct phy_ops ops = { From 4320f9d4c1831fd4d244a9de8f81bc27ea67699c Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Sat, 29 Oct 2016 00:27:01 +0800 Subject: [PATCH 096/224] phy: sun4i: check PMU presence when poking unknown bit of pmu Allwinner SoC's PHY 0, when used as OTG controller, have no pmu part. The code that poke some unknown bit of PMU for H3/A64 didn't check the PHY, and will cause kernel oops when PHY 0 is used. This patch will check whether the pmu is not NULL before poking. Fixes: b3e0d141ca9f (phy: sun4i: add support for A64 usb phy) Signed-off-by: Icenowy Zheng Acked-by: Maxime Ripard Reviewed-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index b9342a2af7b3..fec34f5213c4 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -264,7 +264,7 @@ static int sun4i_usb_phy_init(struct phy *_phy) return ret; } - if (data->cfg->enable_pmu_unk1) { + if (phy->pmu && data->cfg->enable_pmu_unk1) { val = readl(phy->pmu + REG_PMU_UNK1); writel(val & ~2, phy->pmu + REG_PMU_UNK1); } From c2ed83f5426624beda0ecfcb17df033fe4bff7f7 Mon Sep 17 00:00:00 2001 From: Even Xu Date: Fri, 21 Oct 2016 15:48:38 -0700 Subject: [PATCH 097/224] HID: intel-ish-hid: consolidate ish wake up operation Same operations are done in ish_hw_start() and _ish_hw_reset() to wakeup ISH device. Consolidate them by introducing a new function ish_wakeup() and move the code there. Signed-off-by: Even Xu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/ipc.c | 45 +++++++++++++++++------------ 1 file changed, 26 insertions(+), 19 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c index e2517c11e0ee..d4c57214ba6c 100644 --- a/drivers/hid/intel-ish-hid/ipc/ipc.c +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c @@ -637,6 +637,28 @@ irqreturn_t ish_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } +/** + * ish_wakeup() - wakeup ishfw from waiting-for-host state + * @dev: ishtp device pointer + * + * Set the dma enable bit and send a void message to FW, + * it wil wakeup FW from waiting-for-host state. + */ +static void ish_wakeup(struct ishtp_device *dev) +{ + /* Set dma enable bit */ + ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED); + + /* + * Send 0 IPC message so that ISH FW wakes up if it was already + * asleep. + */ + ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT); + + /* Flush writes to doorbell and REMAP2 */ + ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS); +} + /** * _ish_hw_reset() - HW reset * @dev: ishtp device pointer @@ -690,16 +712,8 @@ static int _ish_hw_reset(struct ishtp_device *dev) csr |= PCI_D0; pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr); - ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED); - - /* - * Send 0 IPC message so that ISH FW wakes up if it was already - * asleep - */ - ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT); - - /* Flush writes to doorbell and REMAP2 */ - ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS); + /* Now we can enable ISH DMA operation and wakeup ISHFW */ + ish_wakeup(dev); return 0; } @@ -758,16 +772,9 @@ static int _ish_ipc_reset(struct ishtp_device *dev) int ish_hw_start(struct ishtp_device *dev) { ish_set_host_rdy(dev); - /* After that we can enable ISH DMA operation */ - ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED); - /* - * Send 0 IPC message so that ISH FW wakes up if it was already - * asleep - */ - ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT); - /* Flush write to doorbell */ - ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS); + /* After that we can enable ISH DMA operation and wakeup ISHFW */ + ish_wakeup(dev); set_host_ready(dev); From 8b2979febc134f038f3c8396cb04893f96e03b4f Mon Sep 17 00:00:00 2001 From: Even Xu Date: Fri, 21 Oct 2016 15:48:39 -0700 Subject: [PATCH 098/224] HID: intel-ish-hid: Move DMA disable code to new function Add a new function ish_disable_dma() and move DMA disable operations here, so that this functionality can be reused. Signed-off-by: Even Xu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/ipc.c | 42 ++++++++++++++++++++++------- 1 file changed, 32 insertions(+), 10 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c index d4c57214ba6c..0e0dfa616fab 100644 --- a/drivers/hid/intel-ish-hid/ipc/ipc.c +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c @@ -637,6 +637,36 @@ irqreturn_t ish_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } +/** + * ish_disable_dma() - disable dma communication between host and ISHFW + * @dev: ishtp device pointer + * + * Clear the dma enable bit and wait for dma inactive. + * + * Return: 0 for success else error code. + */ +static int ish_disable_dma(struct ishtp_device *dev) +{ + unsigned int dma_delay; + + /* Clear the dma enable bit */ + ish_reg_write(dev, IPC_REG_ISH_RMP2, 0); + + /* wait for dma inactive */ + for (dma_delay = 0; dma_delay < MAX_DMA_DELAY && + _ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA); + dma_delay += 5) + mdelay(5); + + if (dma_delay >= MAX_DMA_DELAY) { + dev_err(dev->devc, + "Wait for DMA inactive timeout\n"); + return -EBUSY; + } + + return 0; +} + /** * ish_wakeup() - wakeup ishfw from waiting-for-host state * @dev: ishtp device pointer @@ -671,7 +701,6 @@ static int _ish_hw_reset(struct ishtp_device *dev) { struct pci_dev *pdev = dev->pdev; int rv; - unsigned int dma_delay; uint16_t csr; if (!pdev) @@ -686,15 +715,8 @@ static int _ish_hw_reset(struct ishtp_device *dev) return -EINVAL; } - /* Now trigger reset to FW */ - ish_reg_write(dev, IPC_REG_ISH_RMP2, 0); - - for (dma_delay = 0; dma_delay < MAX_DMA_DELAY && - _ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA); - dma_delay += 5) - mdelay(5); - - if (dma_delay >= MAX_DMA_DELAY) { + /* Disable dma communication between FW and host */ + if (ish_disable_dma(dev)) { dev_err(&pdev->dev, "Can't reset - stuck with DMA in-progress\n"); return -EBUSY; From 2a1e3b932c5606e2b3671b82eb63929937eb1e0b Mon Sep 17 00:00:00 2001 From: Even Xu Date: Fri, 21 Oct 2016 15:48:40 -0700 Subject: [PATCH 099/224] HID: intel-ish-hid: Fix driver reinit failure When built as a module, modprobe followed by rmmod can fail because DMA was still active. So to fix this, DMA needs to be disabled during module exit. This change disables DMA during modules exit and change the ISH PCI device status to D3. Signed-off-by: Even Xu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/ipc.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c index 0e0dfa616fab..0c9ac4d5d850 100644 --- a/drivers/hid/intel-ish-hid/ipc/ipc.c +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c @@ -905,6 +905,21 @@ struct ishtp_device *ish_dev_init(struct pci_dev *pdev) */ void ish_device_disable(struct ishtp_device *dev) { + struct pci_dev *pdev = dev->pdev; + + if (!pdev) + return; + + /* Disable dma communication between FW and host */ + if (ish_disable_dma(dev)) { + dev_err(&pdev->dev, + "Can't reset - stuck with DMA in-progress\n"); + return; + } + + /* Put ISH to D3hot state for power saving */ + pci_set_power_state(pdev, PCI_D3hot); + dev->dev_state = ISHTP_DEV_DISABLED; ish_clr_host_rdy(dev); } From 021afd55e2191248b471b29b9d0a96c267939a4d Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 21 Oct 2016 15:48:41 -0700 Subject: [PATCH 100/224] HID: intel-ish-hid: request_irq failure On some platforms ISH interrupt is shared, which causes request_irq to fail. This requires IRQF_SHARED irq flag. But IRQF_NO_SUSPEND and IRQF_SHARED should not be used together, so removed IRQF_NO_SUSPEND flag. Anyway this driver doesn't require IRQF_NO_SUSPEND, as this interrupt is not required during "noirq" phases of suspending and resuming devices as well as during the time when nonboot CPUs are taken offline and brought back online. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/pci-ish.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 7e3622a724aa..20d647d2dd2c 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -146,7 +146,7 @@ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; /* request and enable interrupt */ - ret = request_irq(pdev->irq, ish_irq_handler, IRQF_NO_SUSPEND, + ret = request_irq(pdev->irq, ish_irq_handler, IRQF_SHARED, KBUILD_MODNAME, dev); if (ret) { dev_err(&pdev->dev, "ISH: request IRQ failure (%d)\n", From 4c4480aad0d8eaf0d52b6f2c8c5dfbe0531cbbea Mon Sep 17 00:00:00 2001 From: "Ooi, Joyce" Date: Thu, 3 Nov 2016 18:55:15 +0800 Subject: [PATCH 101/224] HID: sensor: fix attributes in HID sensor interface User is unable to access to input-X-yyy and feature-X-yyy where X is a hex value and more than 9 (e.g. input-a-yyy, feature-b-yyy) in HID sensor custom sysfs interface. This is because when creating the attribute, the attribute index is written to using %x (hex). However, when reading and writing values into the attribute, the attribute index is scanned using %d (decimal). Hence, user is unable to access to attributes with index in hex values (e.g. 'a', 'b', 'c') but able to access to attributes with index in decimal values (e.g. 1, 2, 3,..). This fix will change input-%d-%x-%s and feature-%d-%x-%s to input-%x-%x-%s and feature-%x-%x-%s in show_values() and store_values() accordingly. Signed-off-by: Ooi, Joyce Reviewed-by: Benjamin Tissoires Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-custom.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hid/hid-sensor-custom.c b/drivers/hid/hid-sensor-custom.c index 5614fee82347..3a84aaf1418b 100644 --- a/drivers/hid/hid-sensor-custom.c +++ b/drivers/hid/hid-sensor-custom.c @@ -292,11 +292,11 @@ static ssize_t show_value(struct device *dev, struct device_attribute *attr, bool input = false; int value = 0; - if (sscanf(attr->attr.name, "feature-%d-%x-%s", &index, &usage, + if (sscanf(attr->attr.name, "feature-%x-%x-%s", &index, &usage, name) == 3) { feature = true; field_index = index + sensor_inst->input_field_count; - } else if (sscanf(attr->attr.name, "input-%d-%x-%s", &index, &usage, + } else if (sscanf(attr->attr.name, "input-%x-%x-%s", &index, &usage, name) == 3) { input = true; field_index = index; @@ -398,7 +398,7 @@ static ssize_t store_value(struct device *dev, struct device_attribute *attr, char name[HID_CUSTOM_NAME_LENGTH]; int value; - if (sscanf(attr->attr.name, "feature-%d-%x-%s", &index, &usage, + if (sscanf(attr->attr.name, "feature-%x-%x-%s", &index, &usage, name) == 3) { field_index = index + sensor_inst->input_field_count; } else From 8af644a7d6846f48d6b72be5d4a3c6eb16bd33c8 Mon Sep 17 00:00:00 2001 From: Song Hongyan Date: Tue, 25 Oct 2016 01:06:03 +0000 Subject: [PATCH 102/224] iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver) This fix makes newer ISH hubs work. Previous ones worked by lucky coincidence. Rotation sensor function does not work due to miss PM function. Add common hid sensor iio pm function for rotation sensor. Further clarification from Srinivas: If CONFIG_PM is not defined, then this prevents this sensor to function. So above commit caused this. This sensor was supposed to be always on to trigger wake up in prior external hubs. But with the new ISH hub this is not the case. Signed-off-by: Song Hongyan Fixes: 2b89635e9a9e ("iio: hid_sensor_hub: Common PM functions") Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/orientation/hid-sensor-rotation.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/orientation/hid-sensor-rotation.c b/drivers/iio/orientation/hid-sensor-rotation.c index b98b9d94d184..a97e802ca523 100644 --- a/drivers/iio/orientation/hid-sensor-rotation.c +++ b/drivers/iio/orientation/hid-sensor-rotation.c @@ -335,6 +335,7 @@ static struct platform_driver hid_dev_rot_platform_driver = { .id_table = hid_dev_rot_ids, .driver = { .name = KBUILD_MODNAME, + .pm = &hid_sensor_pm_ops, }, .probe = hid_dev_rot_probe, .remove = hid_dev_rot_remove, From 6f77199e9e4b84340c751c585691d7642a47d226 Mon Sep 17 00:00:00 2001 From: Song Hongyan Date: Tue, 25 Oct 2016 01:30:07 +0000 Subject: [PATCH 103/224] iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation. While testing, it was observed that on some platforms the scale value from iio sysfs for gyroscope is always 0 (E.g. Yoga 260). This results in the final angular velocity component values to be zeros. This is caused by insufficient precision of scale value displayed in sysfs. If the precision is changed to nano from current micro, then this is sufficient to display the scale value on this platform. Since this can be a problem for all other HID sensors, increase scale precision of all HID sensors to nano from current micro. Results on Yoga 260: name scale before scale now -------------------------------------------- gyro_3d 0.000000 0.000000174 als 0.001000 0.001000000 magn_3d 0.000001 0.000001000 accel_3d 0.000009 0.000009806 Signed-off-by: Song Hongyan Acked-by: Srinivas Pandruvada Cc: Signed-off-by: Jonathan Cameron --- .../hid-sensors/hid-sensor-attributes.c | 56 +++++++++---------- 1 file changed, 28 insertions(+), 28 deletions(-) diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c index dc33c1dd5191..b5beea53d6f6 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c @@ -30,26 +30,26 @@ static struct { u32 usage_id; int unit; /* 0 for default others from HID sensor spec */ int scale_val0; /* scale, whole number */ - int scale_val1; /* scale, fraction in micros */ + int scale_val1; /* scale, fraction in nanos */ } unit_conversion[] = { - {HID_USAGE_SENSOR_ACCEL_3D, 0, 9, 806650}, + {HID_USAGE_SENSOR_ACCEL_3D, 0, 9, 806650000}, {HID_USAGE_SENSOR_ACCEL_3D, HID_USAGE_SENSOR_UNITS_METERS_PER_SEC_SQRD, 1, 0}, {HID_USAGE_SENSOR_ACCEL_3D, - HID_USAGE_SENSOR_UNITS_G, 9, 806650}, + HID_USAGE_SENSOR_UNITS_G, 9, 806650000}, - {HID_USAGE_SENSOR_GYRO_3D, 0, 0, 17453}, + {HID_USAGE_SENSOR_GYRO_3D, 0, 0, 17453293}, {HID_USAGE_SENSOR_GYRO_3D, HID_USAGE_SENSOR_UNITS_RADIANS_PER_SECOND, 1, 0}, {HID_USAGE_SENSOR_GYRO_3D, - HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND, 0, 17453}, + HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND, 0, 17453293}, - {HID_USAGE_SENSOR_COMPASS_3D, 0, 0, 1000}, + {HID_USAGE_SENSOR_COMPASS_3D, 0, 0, 1000000}, {HID_USAGE_SENSOR_COMPASS_3D, HID_USAGE_SENSOR_UNITS_GAUSS, 1, 0}, - {HID_USAGE_SENSOR_INCLINOMETER_3D, 0, 0, 17453}, + {HID_USAGE_SENSOR_INCLINOMETER_3D, 0, 0, 17453293}, {HID_USAGE_SENSOR_INCLINOMETER_3D, - HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453}, + HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453293}, {HID_USAGE_SENSOR_INCLINOMETER_3D, HID_USAGE_SENSOR_UNITS_RADIANS, 1, 0}, @@ -57,7 +57,7 @@ static struct { {HID_USAGE_SENSOR_ALS, HID_USAGE_SENSOR_UNITS_LUX, 1, 0}, {HID_USAGE_SENSOR_PRESSURE, 0, 100, 0}, - {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000}, + {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000000}, }; static int pow_10(unsigned power) @@ -266,15 +266,15 @@ EXPORT_SYMBOL(hid_sensor_write_raw_hyst_value); /* * This fuction applies the unit exponent to the scale. * For example: - * 9.806650 ->exp:2-> val0[980]val1[665000] - * 9.000806 ->exp:2-> val0[900]val1[80600] - * 0.174535 ->exp:2-> val0[17]val1[453500] - * 1.001745 ->exp:0-> val0[1]val1[1745] - * 1.001745 ->exp:2-> val0[100]val1[174500] - * 1.001745 ->exp:4-> val0[10017]val1[450000] - * 9.806650 ->exp:-2-> val0[0]val1[98066] + * 9.806650000 ->exp:2-> val0[980]val1[665000000] + * 9.000806000 ->exp:2-> val0[900]val1[80600000] + * 0.174535293 ->exp:2-> val0[17]val1[453529300] + * 1.001745329 ->exp:0-> val0[1]val1[1745329] + * 1.001745329 ->exp:2-> val0[100]val1[174532900] + * 1.001745329 ->exp:4-> val0[10017]val1[453290000] + * 9.806650000 ->exp:-2-> val0[0]val1[98066500] */ -static void adjust_exponent_micro(int *val0, int *val1, int scale0, +static void adjust_exponent_nano(int *val0, int *val1, int scale0, int scale1, int exp) { int i; @@ -285,32 +285,32 @@ static void adjust_exponent_micro(int *val0, int *val1, int scale0, if (exp > 0) { *val0 = scale0 * pow_10(exp); res = 0; - if (exp > 6) { + if (exp > 9) { *val1 = 0; return; } for (i = 0; i < exp; ++i) { - x = scale1 / pow_10(5 - i); + x = scale1 / pow_10(8 - i); res += (pow_10(exp - 1 - i) * x); - scale1 = scale1 % pow_10(5 - i); + scale1 = scale1 % pow_10(8 - i); } *val0 += res; *val1 = scale1 * pow_10(exp); } else if (exp < 0) { exp = abs(exp); - if (exp > 6) { + if (exp > 9) { *val0 = *val1 = 0; return; } *val0 = scale0 / pow_10(exp); rem = scale0 % pow_10(exp); res = 0; - for (i = 0; i < (6 - exp); ++i) { - x = scale1 / pow_10(5 - i); - res += (pow_10(5 - exp - i) * x); - scale1 = scale1 % pow_10(5 - i); + for (i = 0; i < (9 - exp); ++i) { + x = scale1 / pow_10(8 - i); + res += (pow_10(8 - exp - i) * x); + scale1 = scale1 % pow_10(8 - i); } - *val1 = rem * pow_10(6 - exp) + res; + *val1 = rem * pow_10(9 - exp) + res; } else { *val0 = scale0; *val1 = scale1; @@ -332,14 +332,14 @@ int hid_sensor_format_scale(u32 usage_id, unit_conversion[i].unit == attr_info->units) { exp = hid_sensor_convert_exponent( attr_info->unit_expo); - adjust_exponent_micro(val0, val1, + adjust_exponent_nano(val0, val1, unit_conversion[i].scale_val0, unit_conversion[i].scale_val1, exp); break; } } - return IIO_VAL_INT_PLUS_MICRO; + return IIO_VAL_INT_PLUS_NANO; } EXPORT_SYMBOL(hid_sensor_format_scale); From 272d01bd790fdf3f1b16372fe28136e27756756f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 3 Nov 2016 18:34:34 +0000 Subject: [PATCH 104/224] arm64: Fix circular include of asm/lse.h through linux/jump_label.h Commit efd9e03facd0 ("arm64: Use static keys for CPU features") introduced support for static keys in asm/cpufeature.h, including linux/jump_label.h. When CC_HAVE_ASM_GOTO is not defined, this causes a circular dependency via linux/atomic.h, asm/lse.h and asm/cpufeature.h. This patch moves the capability macros out out of asm/cpufeature.h into a separate asm/cpucaps.h and modifies some of the #includes accordingly. Fixes: efd9e03facd0 ("arm64: Use static keys for CPU features") Reported-by: Artem Savkov Tested-by: Artem Savkov Signed-off-by: Catalin Marinas Signed-off-by: Will Deacon --- arch/arm64/include/asm/alternative.h | 2 +- arch/arm64/include/asm/cpucaps.h | 40 ++++++++++++++++++++++++++++ arch/arm64/include/asm/cpufeature.h | 20 +------------- arch/arm64/include/asm/lse.h | 1 - 4 files changed, 42 insertions(+), 21 deletions(-) create mode 100644 arch/arm64/include/asm/cpucaps.h diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h index 39feb85a6931..6e1cb8c5af4d 100644 --- a/arch/arm64/include/asm/alternative.h +++ b/arch/arm64/include/asm/alternative.h @@ -1,7 +1,7 @@ #ifndef __ASM_ALTERNATIVE_H #define __ASM_ALTERNATIVE_H -#include +#include #include #ifndef __ASSEMBLY__ diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h new file mode 100644 index 000000000000..87b446535185 --- /dev/null +++ b/arch/arm64/include/asm/cpucaps.h @@ -0,0 +1,40 @@ +/* + * arch/arm64/include/asm/cpucaps.h + * + * Copyright (C) 2016 ARM Ltd. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef __ASM_CPUCAPS_H +#define __ASM_CPUCAPS_H + +#define ARM64_WORKAROUND_CLEAN_CACHE 0 +#define ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE 1 +#define ARM64_WORKAROUND_845719 2 +#define ARM64_HAS_SYSREG_GIC_CPUIF 3 +#define ARM64_HAS_PAN 4 +#define ARM64_HAS_LSE_ATOMICS 5 +#define ARM64_WORKAROUND_CAVIUM_23154 6 +#define ARM64_WORKAROUND_834220 7 +#define ARM64_HAS_NO_HW_PREFETCH 8 +#define ARM64_HAS_UAO 9 +#define ARM64_ALT_PAN_NOT_UAO 10 +#define ARM64_HAS_VIRT_HOST_EXTN 11 +#define ARM64_WORKAROUND_CAVIUM_27456 12 +#define ARM64_HAS_32BIT_EL0 13 +#define ARM64_HYP_OFFSET_LOW 14 +#define ARM64_MISMATCHED_CACHE_LINE_SIZE 15 + +#define ARM64_NCAPS 16 + +#endif /* __ASM_CPUCAPS_H */ diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index a27c3245ba21..0bc0b1de90c4 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -11,6 +11,7 @@ #include +#include #include #include @@ -24,25 +25,6 @@ #define MAX_CPU_FEATURES (8 * sizeof(elf_hwcap)) #define cpu_feature(x) ilog2(HWCAP_ ## x) -#define ARM64_WORKAROUND_CLEAN_CACHE 0 -#define ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE 1 -#define ARM64_WORKAROUND_845719 2 -#define ARM64_HAS_SYSREG_GIC_CPUIF 3 -#define ARM64_HAS_PAN 4 -#define ARM64_HAS_LSE_ATOMICS 5 -#define ARM64_WORKAROUND_CAVIUM_23154 6 -#define ARM64_WORKAROUND_834220 7 -#define ARM64_HAS_NO_HW_PREFETCH 8 -#define ARM64_HAS_UAO 9 -#define ARM64_ALT_PAN_NOT_UAO 10 -#define ARM64_HAS_VIRT_HOST_EXTN 11 -#define ARM64_WORKAROUND_CAVIUM_27456 12 -#define ARM64_HAS_32BIT_EL0 13 -#define ARM64_HYP_OFFSET_LOW 14 -#define ARM64_MISMATCHED_CACHE_LINE_SIZE 15 - -#define ARM64_NCAPS 16 - #ifndef __ASSEMBLY__ #include diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h index 23acc00be32d..fc756e22c84c 100644 --- a/arch/arm64/include/asm/lse.h +++ b/arch/arm64/include/asm/lse.h @@ -5,7 +5,6 @@ #include #include -#include #ifdef __ASSEMBLER__ From 2c7a5c5c48d97ce3105f3258a259f67b7b9d7eb1 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 24 Sep 2016 07:15:02 -0700 Subject: [PATCH 105/224] openrisc: Define __ro_after_init to avoid crash openrisc qemu tests fail with the following crash. Unable to handle kernel access at virtual address 0xc0300c34 Oops#: 0001 CPU #: 0 PC: c016c710 SR: 0000ae67 SP: c1017e04 GPR00: 00000000 GPR01: c1017e04 GPR02: c0300c34 GPR03: c0300c34 GPR04: 00000000 GPR05: c0300cb0 GPR06: c0300c34 GPR07: 000000ff GPR08: c107f074 GPR09: c0199ef4 GPR10: c1016000 GPR11: 00000000 GPR12: 00000000 GPR13: c107f044 GPR14: c0473774 GPR15: 07ce0000 GPR16: 00000000 GPR17: c107ed8a GPR18: 00009600 GPR19: c107f044 GPR20: c107ee74 GPR21: 00000003 GPR22: c0473770 GPR23: 00000033 GPR24: 000000bf GPR25: 00000019 GPR26: c046400c GPR27: 00000001 GPR28: c0464028 GPR29: c1018000 GPR30: 00000006 GPR31: ccf37483 RES: 00000000 oGPR11: ffffffff Process swapper (pid: 1, stackpage=c1001960) Stack: Stack dump [0xc1017cf8]: sp + 00: 0xc1017e04 sp + 04: 0xc0300c34 sp + 08: 0xc0300c34 sp + 12: 0x00000000 ... Bisect points to commit d2ec3f77de8e ("pty: make ptmx file ops read-only after init"). Fix by defining __ro_after_init for the openrisc architecture, similar to parisc. Fixes: d2ec3f77de8e ("pty: make ptmx file ops read-only after init") Cc: Kees Cook Signed-off-by: Guenter Roeck Acked-by: Stafford Horne --- arch/openrisc/include/asm/cache.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/openrisc/include/asm/cache.h b/arch/openrisc/include/asm/cache.h index 4ce7a01a252d..5f55da9cbfd5 100644 --- a/arch/openrisc/include/asm/cache.h +++ b/arch/openrisc/include/asm/cache.h @@ -23,6 +23,8 @@ * they shouldn't be hard-coded! */ +#define __ro_after_init __read_mostly + #define L1_CACHE_BYTES 16 #define L1_CACHE_SHIFT 4 From 6d6d36bc6e77f8b1f86d81884ad5149931bb4acd Mon Sep 17 00:00:00 2001 From: Eryu Guan Date: Tue, 1 Nov 2016 15:43:07 +0800 Subject: [PATCH 106/224] mm/filemap: don't allow partially uptodate page for pipes Starting from 4.9-rc1 kernel, I started noticing some test failures of sendfile(2) and splice(2) (sendfile0N and splice01 from LTP) when testing on sub-page block size filesystems (tested both XFS and ext4), these syscalls start to return EIO in the tests. e.g. sendfile02 1 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 26, got: -1 sendfile02 2 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 24, got: -1 sendfile02 3 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 22, got: -1 sendfile02 4 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 20, got: -1 This is because that in sub-page block size cases, we don't need the whole page to be uptodate, only the part we care about is uptodate is OK (if fs has ->is_partially_uptodate defined). But page_cache_pipe_buf_confirm() doesn't have the ability to check the partially-uptodate case, it needs the whole page to be uptodate. So it returns EIO in this case. This is a regression introduced by commit 82c156f85384 ("switch generic_file_splice_read() to use of ->read_iter()"). Prior to the change, generic_file_splice_read() doesn't allow partially-uptodate page either, so it worked fine. Fix it by skipping the partially-uptodate check if we're working on a pipe in do_generic_file_read(), so we read the whole page from disk as long as the page is not uptodate. Signed-off-by: Eryu Guan Signed-off-by: Al Viro --- mm/filemap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/filemap.c b/mm/filemap.c index c7fe2f16503f..50b52fe51937 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1732,6 +1732,9 @@ static ssize_t do_generic_file_read(struct file *filp, loff_t *ppos, if (inode->i_blkbits == PAGE_SHIFT || !mapping->a_ops->is_partially_uptodate) goto page_not_up_to_date; + /* pipes can't handle partially uptodate pages */ + if (unlikely(iter->type & ITER_PIPE)) + goto page_not_up_to_date; if (!trylock_page(page)) goto page_not_up_to_date; /* Did it get truncated before we got the lock? */ From 772918524dfb8c8869120728c1b1109a2d49493c Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 30 Oct 2016 05:28:27 +0100 Subject: [PATCH 107/224] nbd: Fix error handling 'blk_mq_alloc_request()' returns an error pointer in case of error, not NULL. So test it with IS_ERR. Fixes: fd8383fd88a2 ("nbd: convert to blkmq") Signed-off-by: Christophe JAILLET Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 19a16b2dbb91..7a1048755914 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -599,7 +599,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, return -EINVAL; sreq = blk_mq_alloc_request(bdev_get_queue(bdev), WRITE, 0); - if (!sreq) + if (IS_ERR(sreq)) return -ENOMEM; mutex_unlock(&nbd->tx_lock); From 9a76a3ac3b9b6326a317c59126cdf9e758f85375 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 31 Oct 2016 11:49:41 +0900 Subject: [PATCH 108/224] Documentation: synopsys-dw-mshc: add binding for reset-names Add reset-names property for binding dw-mmc controller. It might be used together with "reset" property. - Note: It must be "reset" as name. Fixes: d6786fefe816 ("mmc: dw_mmc: add reset support to dwmmc host controller") Signed-off-by: Jaehoon Chung Acked-by: John Stultz Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 4e00e859e885..bfa461aaac99 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -43,6 +43,9 @@ Optional properties: reset signal present internally in some host controller IC designs. See Documentation/devicetree/bindings/reset/reset.txt for details. +* reset-names: request name for using "resets" property. Must be "reset". + (It will be used together with "resets" property.) + * clocks: from common clock binding: handle to biu and ciu clocks for the bus interface unit clock and the card interface unit clock. @@ -103,6 +106,8 @@ board specific portions as listed below. interrupts = <0 75 0>; #address-cells = <1>; #size-cells = <0>; + resets = <&rst 20>; + reset-names = "reset"; }; [board specific internal DMA resources] From 3a667e3ff78ae81afc49343c753864cc1ede2f77 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 31 Oct 2016 11:49:42 +0900 Subject: [PATCH 109/224] mmc: dw_mmc: add the "reset" as name of reset controller Add the "reset" as name of reset controller. This is for preventing the wrong operation. Even if some SoC has reset controller, doesn't define "resets" in device-tree. Then it might be waiting for reset controller and it should be stuck. Fixes: d6786fefe816 ("mmc: dw_mmc: add reset support to dwmmc host controller") Signed-off-by: Jaehoon Chung Acked-by: John Stultz Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 4fcbc4012ed0..50a674be6655 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2940,7 +2940,7 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) return ERR_PTR(-ENOMEM); /* find reset controller when exist */ - pdata->rstc = devm_reset_control_get_optional(dev, NULL); + pdata->rstc = devm_reset_control_get_optional(dev, "reset"); if (IS_ERR(pdata->rstc)) { if (PTR_ERR(pdata->rstc) == -EPROBE_DEFER) return ERR_PTR(-EPROBE_DEFER); From 355f1a39183467d48f20d90adce3b4aa75c6b260 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Tue, 1 Nov 2016 15:47:04 -0500 Subject: [PATCH 110/224] usb: musb: da8xx: Don't print phy error on -EPROBE_DEFER This suppresses printing the error message "failed to get phy" in the kernel log when the error is -EPROBE_DEFER. This prevents usless noise in the kernel log. Signed-off-by: David Lechner Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/da8xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 210b7e43a6fd..2440f88e07a3 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -479,7 +479,8 @@ static int da8xx_probe(struct platform_device *pdev) glue->phy = devm_phy_get(&pdev->dev, "usb-phy"); if (IS_ERR(glue->phy)) { - dev_err(&pdev->dev, "failed to get phy\n"); + if (PTR_ERR(glue->phy) != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to get phy\n"); return PTR_ERR(glue->phy); } From 2e52ec2394fb9486fd496737a84d629b2c992db2 Mon Sep 17 00:00:00 2001 From: Kirill Esipov Date: Tue, 1 Nov 2016 15:47:05 -0500 Subject: [PATCH 111/224] usb: musb: remove duplicated actions Removing unnecessary duplicated actions that we've got while merging: Commit 19915e623458 ("Merge 4.1-rc7 into usb-next") [ b-liu@ti.com: added 'Commit' in the commit message ] Signed-off-by: Kirill Esipov Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 27dadc0d9114..e01116e4c067 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2114,11 +2114,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->io.ep_offset = musb_flat_ep_offset; musb->io.ep_select = musb_flat_ep_select; } - /* And override them with platform specific ops if specified. */ - if (musb->ops->ep_offset) - musb->io.ep_offset = musb->ops->ep_offset; - if (musb->ops->ep_select) - musb->io.ep_select = musb->ops->ep_select; /* At least tusb6010 has its own offsets */ if (musb->ops->ep_offset) From c289d0eff3d5a594c577c0dc162412a2cad075a4 Mon Sep 17 00:00:00 2001 From: Babu Moger Date: Fri, 21 Oct 2016 15:25:05 -0700 Subject: [PATCH 112/224] drivers/usb: Skip auto handoff for TI and RENESAS usb controllers Never seen XHCI auto handoff working on TI and RENESAS cards. Eventually, we force handoff. This code forces the handoff unconditionally. It saves 5 seconds boot time for each card. Signed-off-by: Babu Moger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index d793f548dfe2..a9a1e4c40480 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -995,6 +995,14 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) } val = readl(base + ext_cap_offset); + /* Auto handoff never worked for these devices. Force it and continue */ + if ((pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) || + (pdev->vendor == PCI_VENDOR_ID_RENESAS + && pdev->device == 0x0014)) { + val = (val | XHCI_HC_OS_OWNED) & ~XHCI_HC_BIOS_OWNED; + writel(val, base + ext_cap_offset); + } + /* If the BIOS owns the HC, signal that the OS wants it, and wait */ if (val & XHCI_HC_BIOS_OWNED) { writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset); From 7309aa847ead3fa561663b16779a0dde8c64cc7c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 2 Nov 2016 14:42:52 +0100 Subject: [PATCH 113/224] cdc-acm: fix uninitialized variable variable struct usb_cdc_parsed_header h may be used uninitialized in acm_probe. In kernel 4.8. /* handle quirks deadly to normal probing*/ if (quirks == NO_UNION_NORMAL) ... goto skip_normal_probe; } we bypass call to cdc_parse_cdc_header(&h, intf, buffer, buflen); but later use h in if (h.usb_cdc_country_functional_desc) { /* export the country data */ Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Reported-by: Victor Sologoubov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 78f0f85bebdc..4ad4ca44058b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1161,6 +1161,8 @@ static int acm_probe(struct usb_interface *intf, if (quirks == IGNORE_DEVICE) return -ENODEV; + memset(&h, 0x00, sizeof(struct usb_cdc_parsed_header)); + num_rx_buf = (quirks == SINGLE_RX_URB) ? 1 : ACM_NR; /* handle quirks deadly to normal probing*/ From 33c027ae3cfd8fefb6cccccc5c6b2c07d80891ce Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Thu, 3 Nov 2016 12:48:43 +0800 Subject: [PATCH 114/224] staging: sm750fb: Fix bugs introduced by early commits Early commit 30ca5cb63c56965 ("staging: sm750fb: change definition of PANEL_PLANE_TL fields") and 27b047bbe1ee9c0 ("staging: sm750fb: change definition of PANEL_PLANE_BR fields") modify the register bit fields definitions. But the modifications are wrong, because the bit mask of "bit field 10:0" is not 0xeff, but 0x7ff. The wrong definition bugs makes display very strange. Signed-off-by: Huacai Chen Cc: stable # 4.6+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sm750fb/ddk750_reg.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h index 955247979aaa..4ed6d8d7712a 100644 --- a/drivers/staging/sm750fb/ddk750_reg.h +++ b/drivers/staging/sm750fb/ddk750_reg.h @@ -601,13 +601,13 @@ #define PANEL_PLANE_TL 0x08001C #define PANEL_PLANE_TL_TOP_SHIFT 16 -#define PANEL_PLANE_TL_TOP_MASK (0xeff << 16) -#define PANEL_PLANE_TL_LEFT_MASK 0xeff +#define PANEL_PLANE_TL_TOP_MASK (0x7ff << 16) +#define PANEL_PLANE_TL_LEFT_MASK 0x7ff #define PANEL_PLANE_BR 0x080020 #define PANEL_PLANE_BR_BOTTOM_SHIFT 16 -#define PANEL_PLANE_BR_BOTTOM_MASK (0xeff << 16) -#define PANEL_PLANE_BR_RIGHT_MASK 0xeff +#define PANEL_PLANE_BR_BOTTOM_MASK (0x7ff << 16) +#define PANEL_PLANE_BR_RIGHT_MASK 0x7ff #define PANEL_HORIZONTAL_TOTAL 0x080024 #define PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT 16 From a33547cc764ca994d27a8fcc5fc61fbf4b2f7361 Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Thu, 3 Nov 2016 01:07:56 +1030 Subject: [PATCH 115/224] pinctrl-aspeed-g5: Never set SCU90[6] MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If a pin depending on bit 6 in SCU90 is requested for GPIO, the export will succeed but changes to the GPIO's value will not be accepted by the hardware. This is because the pinmux driver has misconfigured the SCU by writing 1 to the reserved bit. The description of SCU90[6] from the datasheet is 'Reserved, must keep at value ”0”'. The fix is to switch pinmux from the bit-flipping macro to explicitly configuring the .enable and .disable values to zero. The patch has been tested on an AST2500 EVB. Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver) Reported-by: Uma Yadlapati Signed-off-by: Andrew Jeffery Reviewed-by: Joel Stanley Signed-off-by: Linus Walleij --- drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c index c8c72e8259d3..87b46390b695 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c @@ -26,7 +26,7 @@ #define ASPEED_G5_NR_PINS 228 -#define COND1 SIG_DESC_BIT(SCU90, 6, 0) +#define COND1 { SCU90, BIT(6), 0, 0 } #define COND2 { SCU94, GENMASK(1, 0), 0, 0 } #define B14 0 From 55abe8165f31ffb83ce8b24da959b61362dca4c4 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 27 Oct 2016 20:28:36 +0100 Subject: [PATCH 116/224] staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value `ni_tio_clock_period_ps()` used to return the clock period in picoseconds, and had a `BUG()` call for invalid cases. It was changed to pass the clock period back via a pointer parameter and return an error for the invalid cases. Unfortunately the code to handle user-specified clock sources with user-specified clock period is still returning the clock period the old way, which can lead to the caller not getting the clock period, or seeing an unexpected error. Fix it by passing the clock period via the pointer parameter and returning `0`. Fixes: b42ca86ad605 ("staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_clock_src()") Signed-off-by: Ian Abbott Cc: # 4.7+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_tio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/ni_tio.c b/drivers/staging/comedi/drivers/ni_tio.c index 7043eb0543f6..5ab49a798164 100644 --- a/drivers/staging/comedi/drivers/ni_tio.c +++ b/drivers/staging/comedi/drivers/ni_tio.c @@ -207,7 +207,8 @@ static int ni_tio_clock_period_ps(const struct ni_gpct *counter, * clock period is specified by user with prescaling * already taken into account. */ - return counter->clock_period_ps; + *period_ps = counter->clock_period_ps; + return 0; } switch (generic_clock_source & NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK) { From d9966f1de990577b49903061cfcea2d1e85353fb Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 1 Nov 2016 11:55:02 +0100 Subject: [PATCH 117/224] staging: greybus: arche-platform: fix device reference leak Make sure to drop the device reference taken by of_find_device_by_node() before returning from arche_platform_change_state(). Note that this code is expected to be removed, but let's fix up the leak nonetheless. Fixes: 886aba558b9e ("greybus: arche-platform: Export fn to allow...") Signed-off-by: Johan Hovold Acked-by: Viresh Kumar Reviewed-by: Vaibhav Hiremath Signed-off-by: Greg Kroah-Hartman --- drivers/staging/greybus/arche-platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/greybus/arche-platform.c b/drivers/staging/greybus/arche-platform.c index 34307ac3f255..d33d6fe078ad 100644 --- a/drivers/staging/greybus/arche-platform.c +++ b/drivers/staging/greybus/arche-platform.c @@ -186,6 +186,7 @@ int arche_platform_change_state(enum arche_platform_state state, exit: spin_unlock_irqrestore(&arche_pdata->wake_lock, flags); mutex_unlock(&arche_pdata->platform_state_mutex); + put_device(&pdev->dev); of_node_put(np); return ret; } From d8f8a74d5fece355d2234e1731231d1aebc66b38 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 27 Oct 2016 17:22:08 +0300 Subject: [PATCH 118/224] drivers: staging: nvec: remove bogus reset command for PS/2 interface This command was sent behind serio's back and the answer to it was confusing atkbd probe function which lead to the elantech touchpad getting detected as a keyboard. To prevent this from happening just let every party do its part of the job. Signed-off-by: Paul Fertser Acked-by: Marc Dietrich Cc: stable # 3.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec_ps2.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index a324322ee0ad..d63c4efa8074 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -106,7 +106,6 @@ static int nvec_mouse_probe(struct platform_device *pdev) { struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent); struct serio *ser_dev; - char mouse_reset[] = { NVEC_PS2, SEND_COMMAND, PSMOUSE_RST, 3 }; ser_dev = devm_kzalloc(&pdev->dev, sizeof(struct serio), GFP_KERNEL); if (!ser_dev) @@ -127,9 +126,6 @@ static int nvec_mouse_probe(struct platform_device *pdev) serio_register_port(ser_dev); - /* mouse reset */ - nvec_write_async(nvec, mouse_reset, sizeof(mouse_reset)); - return 0; } From 17c1c9ba15b238ef79b51cf40d855c05b58d5934 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 27 Oct 2016 17:22:09 +0300 Subject: [PATCH 119/224] Revert "staging: nvec: ps2: change serio type to passthrough" This reverts commit 36b30d6138f4677514aca35ab76c20c1604baaad. This is necessary to detect paz00 (ac100) touchpad properly as one speaking ETPS/2 protocol. Without it X.org's synaptics driver doesn't work as the touchpad is detected as an ImPS/2 mouse instead. Commit ec6184b1c717b8768122e25fe6d312f609cc1bb4 changed the way auto-detection is performed on ports marked as pass through and made the issue apparent. A pass through port is an additional PS/2 port used to connect a slave device to a master device that is using PS/2 to communicate with the host (so slave's PS/2 communication is tunneled over master's PS/2 link). "Synaptics PS/2 TouchPad Interfacing Guide" describes such a setup (PS/2 PASS-THROUGH OPTION section). Since paz00's embedded controller is not connected to a PS/2 port itself, the PS/2 interface it exposes is not a pass-through one. Signed-off-by: Paul Fertser Acked-by: Marc Dietrich Fixes: 36b30d6138f4 ("staging: nvec: ps2: change serio type to passthrough") Cc: stable # 3.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec_ps2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index d63c4efa8074..910e87b761e7 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -111,7 +111,7 @@ static int nvec_mouse_probe(struct platform_device *pdev) if (!ser_dev) return -ENOMEM; - ser_dev->id.type = SERIO_PS_PSTHRU; + ser_dev->id.type = SERIO_8042; ser_dev->write = ps2_sendcommand; ser_dev->start = ps2_startstreaming; ser_dev->stop = ps2_stopstreaming; From 68fae2f3df455f53d0dfe33483a49020b3b758f3 Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Tue, 1 Nov 2016 13:59:40 +0100 Subject: [PATCH 120/224] staging: nvec: remove managed resource from PS2 driver This basicly reverts commit e534f3e9 (staging:nvec: Introduce the use of the managed version of kzalloc). Serio struct should never by managed because it is refcounted. Doing so will lead to a double free oops on module remove. Signed-off-by: Marc Dietrich Fixes: e534f3e9429f ("staging:nvec: Introduce the use of the managed version of kzalloc") Cc: stable # 3.15+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec_ps2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index 910e87b761e7..499952c8ef39 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -107,7 +107,7 @@ static int nvec_mouse_probe(struct platform_device *pdev) struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent); struct serio *ser_dev; - ser_dev = devm_kzalloc(&pdev->dev, sizeof(struct serio), GFP_KERNEL); + ser_dev = kzalloc(sizeof(struct serio), GFP_KERNEL); if (!ser_dev) return -ENOMEM; From 6ebebeab5185f50d55c6a24d0abe47e5dac1b191 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:08 +0200 Subject: [PATCH 121/224] mmc: sdhci: Fix CMD line reset interfering with ongoing data transfer CMD line reset during an ongoing data transfer can cause the data transfer to hang. Fix by delaying the reset until the data transfer is finished. Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 71654b90227f..fd0f24cddad4 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2286,10 +2286,8 @@ static bool sdhci_request_done(struct sdhci_host *host) for (i = 0; i < SDHCI_MAX_MRQS; i++) { mrq = host->mrqs_done[i]; - if (mrq) { - host->mrqs_done[i] = NULL; + if (mrq) break; - } } if (!mrq) { @@ -2320,6 +2318,17 @@ static bool sdhci_request_done(struct sdhci_host *host) * upon error conditions. */ if (sdhci_needs_reset(host, mrq)) { + /* + * Do not finish until command and data lines are available for + * reset. Note there can only be one other mrq, so it cannot + * also be in mrqs_done, otherwise host->cmd and host->data_cmd + * would both be null. + */ + if (host->cmd || host->data_cmd) { + spin_unlock_irqrestore(&host->lock, flags); + return true; + } + /* Some controllers need this kick or reset won't work here */ if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) /* This is to force an update */ @@ -2327,10 +2336,8 @@ static bool sdhci_request_done(struct sdhci_host *host) /* Spec says we should do both at the same time, but Ricoh controllers do not like that. */ - if (!host->cmd) - sdhci_do_reset(host, SDHCI_RESET_CMD); - if (!host->data_cmd) - sdhci_do_reset(host, SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); host->pending_reset = false; } @@ -2338,6 +2345,8 @@ static bool sdhci_request_done(struct sdhci_host *host) if (!sdhci_has_requests(host)) sdhci_led_deactivate(host); + host->mrqs_done[i] = NULL; + mmiowb(); spin_unlock_irqrestore(&host->lock, flags); From 69b962a65a547690a356f9f76bc4f53db538ac49 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:09 +0200 Subject: [PATCH 122/224] mmc: sdhci: Fix unexpected data interrupt handling In the busy response case (i.e. !host->data), an unexpected data interrupt would result in clearing the data command as though it had completed but without informing the upper layers and thus resulting in a hang. Fix by only clearing the data command for data interrupts that are expected. Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index fd0f24cddad4..0dd3c31e23bb 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2521,9 +2521,6 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) if (!host->data) { struct mmc_command *data_cmd = host->data_cmd; - if (data_cmd) - host->data_cmd = NULL; - /* * The "data complete" interrupt is also used to * indicate that a busy state has ended. See comment @@ -2531,11 +2528,13 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) */ if (data_cmd && (data_cmd->flags & MMC_RSP_BUSY)) { if (intmask & SDHCI_INT_DATA_TIMEOUT) { + host->data_cmd = NULL; data_cmd->error = -ETIMEDOUT; sdhci_finish_mrq(host, data_cmd->mrq); return; } if (intmask & SDHCI_INT_DATA_END) { + host->data_cmd = NULL; /* * Some cards handle busy-end interrupt * before the command completed, so make From fe5fb2e3b58f866f82a80fe7c7866ea6d0b306b9 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:10 +0200 Subject: [PATCH 123/224] mmc: sdhci: Reset cmd and data circuits after tuning failure To prevent subsequent commands failing, ensure the cmd and data circuits are reset after a tuning timeout. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 0dd3c31e23bb..542aabc48032 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2086,6 +2086,10 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) if (!host->tuning_done) { pr_info(DRIVER_NAME ": Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n"); + + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); ctrl &= ~SDHCI_CTRL_TUNED_CLK; ctrl &= ~SDHCI_CTRL_EXEC_TUNING; From 086b0ddbeff5317026417c29752129d28a216c66 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:11 +0200 Subject: [PATCH 124/224] mmc: sdhci: Fix missing enhanced strobe setting during runtime resume Restore enhanced strobe setting during runtime resume. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 542aabc48032..42ef3ebb1d8c 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2924,6 +2924,10 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) spin_unlock_irqrestore(&host->lock, flags); } + if ((mmc->caps2 & MMC_CAP2_HS400_ES) && + mmc->ops->hs400_enhanced_strobe) + mmc->ops->hs400_enhanced_strobe(mmc, &mmc->ios); + spin_lock_irqsave(&host->lock, flags); host->runtime_suspended = false; From be55f7bee39ed019713c5a1e930214e6d744fe0f Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 4 Nov 2016 13:41:05 +0200 Subject: [PATCH 125/224] mmc: mmc_test: Fix "Commands during non-blocking write" tests mmc_test_check_result_async() requires that struct mmc_async_req is contained within struct mmc_test_async_req. Fix the "Commands during non-blocking write" tests so that is the case. Fixes: 4bbb9aac9a9a ("mmc: mmc_test: Add tests for sending commands during transfer") Signed-off-by: Adrian Hunter Tested-by: Ritesh Harjani Signed-off-by: Ulf Hansson --- drivers/mmc/card/mmc_test.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index 5a8dc5a76e0d..3678220964fe 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -2347,7 +2347,7 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test, struct mmc_test_req *rq = mmc_test_req_alloc(); struct mmc_host *host = test->card->host; struct mmc_test_area *t = &test->area; - struct mmc_async_req areq; + struct mmc_test_async_req test_areq = { .test = test }; struct mmc_request *mrq; unsigned long timeout; bool expired = false; @@ -2363,8 +2363,8 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test, mrq->sbc = &rq->sbc; mrq->cap_cmd_during_tfr = true; - areq.mrq = mrq; - areq.err_check = mmc_test_check_result_async; + test_areq.areq.mrq = mrq; + test_areq.areq.err_check = mmc_test_check_result_async; mmc_test_prepare_mrq(test, mrq, t->sg, t->sg_len, dev_addr, t->blocks, 512, write); @@ -2378,7 +2378,7 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test, /* Start ongoing data request */ if (use_areq) { - mmc_start_req(host, &areq, &ret); + mmc_start_req(host, &test_areq.areq, &ret); if (ret) goto out_free; } else { From fe1b5700c70faac6e027982d59667bc6020de5a8 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Fri, 4 Nov 2016 18:32:33 +0100 Subject: [PATCH 126/224] mmc: mmc: Use 500ms as the default generic CMD6 timeout In the eMMC 4.51 version of the spec, an EXT_CSD field called GENERIC_CMD6_TIME[248] was added. This allows cards to specify the maximum time it may need to move out from its busy state, when a CMD6 command has been sent. In cases when the card is compliant to versions < 4.51 of the eMMC spec, obviously the core needs to use a fall-back value for this timeout, which currently is set to 10 minutes. This value is completely in the wrong range and importantly in some cases it causes a card initialization to take more than 10 minute to complete. Earlier this scenario was avoided as the mmc core used CMD13 to poll the card, to find out when it stopped signaling busy. Commit 08573eaf1a70 ("mmc: mmc: do not use CMD13 to get status after speed mode switch") changed this behavior. Instead of reverting that commit, which would cause other issues, let's instead start by picking a simple solution for the problem, by using a 500ms default generic CMD6 timeout. The reason for using exactly 500ms, comes from observations that shows it's quite common for cards to specify 250ms. 500ms is two times that value so likely it should be enough for most cards. Cc: # v4.8+ Fixes: 08573eaf1a70 ("mmc: mmc: do not use CMD13 to get status after speed mode switch") Signed-off-by: Ulf Hansson Tested-by: Stephen Boyd Tested-by: Linus Walleij --- drivers/mmc/core/mmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 39fc5b2b96c5..df19777068a6 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -26,6 +26,8 @@ #include "mmc_ops.h" #include "sd_ops.h" +#define DEFAULT_CMD6_TIMEOUT_MS 500 + static const unsigned int tran_exp[] = { 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 @@ -571,6 +573,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) card->erased_byte = 0x0; /* eMMC v4.5 or later */ + card->ext_csd.generic_cmd6_time = DEFAULT_CMD6_TIMEOUT_MS; if (card->ext_csd.rev >= 6) { card->ext_csd.feature_support |= MMC_DISCARD_FEATURE; From f91346e8b5f46aaf12f1df26e87140584ffd1b3f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 5 Nov 2016 17:45:07 -0200 Subject: [PATCH 127/224] mmc: mxs: Initialize the spinlock prior to using it An interrupt may occur right after devm_request_irq() is called and prior to the spinlock initialization, leading to a kernel oops, as the interrupt handler uses the spinlock. In order to prevent this problem, move the spinlock initialization prior to requesting the interrupts. Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28) Signed-off-by: Fabio Estevam Reviewed-by: Marek Vasut Signed-off-by: Ulf Hansson --- drivers/mmc/host/mxs-mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index d839147e591d..44ecebd1ea8c 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -661,13 +661,13 @@ static int mxs_mmc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mmc); + spin_lock_init(&host->lock); + ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0, dev_name(&pdev->dev), host); if (ret) goto out_free_dma; - spin_lock_init(&host->lock); - ret = mmc_add_host(mmc); if (ret) goto out_free_dma; From dc0336214eb07ee9de2a41dd4c81c744ffa419ac Mon Sep 17 00:00:00 2001 From: Mike Marshall Date: Fri, 4 Nov 2016 16:32:25 -0400 Subject: [PATCH 128/224] orangefs: clean up debugfs We recently refactored the Orangefs debugfs code. The refactor seemed to trigger dan.carpenter@oracle.com's static tester to find a possible double-free in the code. While designing the fix we saw a condition under which the buffer being freed could also be overflowed. We also realized how to rebuild the related debugfs file's "contents" (a string) without deleting and re-creating the file. This fix should eliminate the possible double-free, the potential overflow and improve code readability. Signed-off-by: Mike Marshall Signed-off-by: Martin Brandenburg --- fs/orangefs/orangefs-debugfs.c | 147 ++++++++++++++------------------- fs/orangefs/orangefs-mod.c | 6 +- 2 files changed, 68 insertions(+), 85 deletions(-) diff --git a/fs/orangefs/orangefs-debugfs.c b/fs/orangefs/orangefs-debugfs.c index eb09aa026723..d484068ca716 100644 --- a/fs/orangefs/orangefs-debugfs.c +++ b/fs/orangefs/orangefs-debugfs.c @@ -141,6 +141,9 @@ static struct client_debug_mask client_debug_mask; */ static DEFINE_MUTEX(orangefs_debug_lock); +/* Used to protect data in ORANGEFS_KMOD_DEBUG_HELP_FILE */ +static DEFINE_MUTEX(orangefs_help_file_lock); + /* * initialize kmod debug operations, create orangefs debugfs dir and * ORANGEFS_KMOD_DEBUG_HELP_FILE. @@ -289,6 +292,8 @@ static void *help_start(struct seq_file *m, loff_t *pos) gossip_debug(GOSSIP_DEBUGFS_DEBUG, "help_start: start\n"); + mutex_lock(&orangefs_help_file_lock); + if (*pos == 0) payload = m->private; @@ -305,6 +310,7 @@ static void *help_next(struct seq_file *m, void *v, loff_t *pos) static void help_stop(struct seq_file *m, void *p) { gossip_debug(GOSSIP_DEBUGFS_DEBUG, "help_stop: start\n"); + mutex_unlock(&orangefs_help_file_lock); } static int help_show(struct seq_file *m, void *v) @@ -610,32 +616,54 @@ static int orangefs_prepare_cdm_array(char *debug_array_string) * /sys/kernel/debug/orangefs/debug-help can be catted to * see all the available kernel and client debug keywords. * - * When the kernel boots, we have no idea what keywords the + * When orangefs.ko initializes, we have no idea what keywords the * client supports, nor their associated masks. * - * We pass through this function once at boot and stamp a + * We pass through this function once at module-load and stamp a * boilerplate "we don't know" message for the client in the * debug-help file. We pass through here again when the client * starts and then we can fill out the debug-help file fully. * * The client might be restarted any number of times between - * reboots, we only build the debug-help file the first time. + * module reloads, we only build the debug-help file the first time. */ int orangefs_prepare_debugfs_help_string(int at_boot) { - int rc = -EINVAL; - int i; - int byte_count = 0; char *client_title = "Client Debug Keywords:\n"; char *kernel_title = "Kernel Debug Keywords:\n"; + size_t string_size = DEBUG_HELP_STRING_SIZE; + size_t result_size; + size_t i; + char *new; + int rc = -EINVAL; gossip_debug(GOSSIP_UTILS_DEBUG, "%s: start\n", __func__); - if (at_boot) { - byte_count += strlen(HELP_STRING_UNINITIALIZED); + if (at_boot) client_title = HELP_STRING_UNINITIALIZED; - } else { - /* + + /* build a new debug_help_string. */ + new = kzalloc(DEBUG_HELP_STRING_SIZE, GFP_KERNEL); + if (!new) { + rc = -ENOMEM; + goto out; + } + + /* + * strlcat(dst, src, size) will append at most + * "size - strlen(dst) - 1" bytes of src onto dst, + * null terminating the result, and return the total + * length of the string it tried to create. + * + * We'll just plow through here building our new debug + * help string and let strlcat take care of assuring that + * dst doesn't overflow. + */ + strlcat(new, client_title, string_size); + + if (!at_boot) { + + /* * fill the client keyword/mask array and remember * how many elements there were. */ @@ -644,64 +672,40 @@ int orangefs_prepare_debugfs_help_string(int at_boot) if (cdm_element_count <= 0) goto out; - /* Count the bytes destined for debug_help_string. */ - byte_count += strlen(client_title); - for (i = 0; i < cdm_element_count; i++) { - byte_count += strlen(cdm_array[i].keyword + 2); - if (byte_count >= DEBUG_HELP_STRING_SIZE) { - pr_info("%s: overflow 1!\n", __func__); - goto out; - } + strlcat(new, "\t", string_size); + strlcat(new, cdm_array[i].keyword, string_size); + strlcat(new, "\n", string_size); } - - gossip_debug(GOSSIP_UTILS_DEBUG, - "%s: cdm_element_count:%d:\n", - __func__, - cdm_element_count); } - byte_count += strlen(kernel_title); + strlcat(new, "\n", string_size); + strlcat(new, kernel_title, string_size); + for (i = 0; i < num_kmod_keyword_mask_map; i++) { - byte_count += - strlen(s_kmod_keyword_mask_map[i].keyword + 2); - if (byte_count >= DEBUG_HELP_STRING_SIZE) { - pr_info("%s: overflow 2!\n", __func__); - goto out; - } + strlcat(new, "\t", string_size); + strlcat(new, s_kmod_keyword_mask_map[i].keyword, string_size); + result_size = strlcat(new, "\n", string_size); } - /* build debug_help_string. */ - debug_help_string = kzalloc(DEBUG_HELP_STRING_SIZE, GFP_KERNEL); - if (!debug_help_string) { - rc = -ENOMEM; + /* See if we tried to put too many bytes into "new"... */ + if (result_size >= string_size) { + kfree(new); goto out; } - strcat(debug_help_string, client_title); - - if (!at_boot) { - for (i = 0; i < cdm_element_count; i++) { - strcat(debug_help_string, "\t"); - strcat(debug_help_string, cdm_array[i].keyword); - strcat(debug_help_string, "\n"); - } - } - - strcat(debug_help_string, "\n"); - strcat(debug_help_string, kernel_title); - - for (i = 0; i < num_kmod_keyword_mask_map; i++) { - strcat(debug_help_string, "\t"); - strcat(debug_help_string, s_kmod_keyword_mask_map[i].keyword); - strcat(debug_help_string, "\n"); + if (at_boot) { + debug_help_string = new; + } else { + mutex_lock(&orangefs_help_file_lock); + memset(debug_help_string, 0, DEBUG_HELP_STRING_SIZE); + strlcat(debug_help_string, new, string_size); + mutex_unlock(&orangefs_help_file_lock); } rc = 0; -out: - - return rc; +out: return rc; } @@ -959,8 +963,12 @@ int orangefs_debugfs_new_client_string(void __user *arg) ret = copy_from_user(&client_debug_array_string, (void __user *)arg, ORANGEFS_MAX_DEBUG_STRING_LEN); - if (ret != 0) + + if (ret != 0) { + pr_info("%s: CLIENT_STRING: copy_from_user failed\n", + __func__); return -EIO; + } /* * The real client-core makes an effort to ensure @@ -975,45 +983,18 @@ int orangefs_debugfs_new_client_string(void __user *arg) client_debug_array_string[ORANGEFS_MAX_DEBUG_STRING_LEN - 1] = '\0'; - if (ret != 0) { - pr_info("%s: CLIENT_STRING: copy_from_user failed\n", - __func__); - return -EIO; - } - pr_info("%s: client debug array string has been received.\n", __func__); if (!help_string_initialized) { - /* Free the "we don't know yet" default string... */ - kfree(debug_help_string); - - /* build a proper debug help string */ + /* Build a proper debug help string. */ if (orangefs_prepare_debugfs_help_string(0)) { gossip_err("%s: no debug help string \n", __func__); return -EIO; } - /* Replace the boilerplate boot-time debug-help file. */ - debugfs_remove(help_file_dentry); - - help_file_dentry = - debugfs_create_file( - ORANGEFS_KMOD_DEBUG_HELP_FILE, - 0444, - debug_dir, - debug_help_string, - &debug_help_fops); - - if (!help_file_dentry) { - gossip_err("%s: debugfs_create_file failed for" - " :%s:!\n", - __func__, - ORANGEFS_KMOD_DEBUG_HELP_FILE); - return -EIO; - } } debug_mask_to_string(&client_debug_mask, 1); diff --git a/fs/orangefs/orangefs-mod.c b/fs/orangefs/orangefs-mod.c index 2e5b03065f34..4113eb0495bf 100644 --- a/fs/orangefs/orangefs-mod.c +++ b/fs/orangefs/orangefs-mod.c @@ -124,7 +124,7 @@ static int __init orangefs_init(void) * unknown at boot time. * * orangefs_prepare_debugfs_help_string will be used again - * later to rebuild the debug-help file after the client starts + * later to rebuild the debug-help-string after the client starts * and passes along the needed info. The argument signifies * which time orangefs_prepare_debugfs_help_string is being * called. @@ -152,7 +152,9 @@ static int __init orangefs_init(void) ret = register_filesystem(&orangefs_fs_type); if (ret == 0) { - pr_info("orangefs: module version %s loaded\n", ORANGEFS_VERSION); + pr_info("%s: module version %s loaded\n", + __func__, + ORANGEFS_VERSION); ret = 0; goto out; } From 8d83bc22b259e5526625b6d298f637786c71129f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 11 Oct 2016 20:52:46 +0300 Subject: [PATCH 129/224] drm/i915: Respect alternate_ddc_pin for all DDI ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VBT provides the platform a way to mix and match the DDI ports vs. GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose has no standard GMBUS pin assignment. However, there are machines out there that use a non-standard mapping for the other ports as well. Let's start trusting the VBT on this one for all ports on DDI platforms. I've structured the code such that other platforms could easily start using this as well, by simply filling in the ddi_port_info. IIRC there may be CHV system that might actually need this. v2: Include a commit message, include a debug message during init Cc: stable@vger.kernel.org Cc: Maarten Maathuis Tested-by: Maarten Maathuis Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride (cherry picked from commit e4ab73a13291fc844c9e24d5c347bd95818544d2) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_hdmi.c | 84 ++++++++++++++++++------------- 1 file changed, 48 insertions(+), 36 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index f40a35f2913a..13c306173f27 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1799,6 +1799,50 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *c intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_NONE; } +static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + u8 ddc_pin; + + if (info->alternate_ddc_pin) { + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (VBT)\n", + info->alternate_ddc_pin, port_name(port)); + return info->alternate_ddc_pin; + } + + switch (port) { + case PORT_B: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_1_BXT; + else + ddc_pin = GMBUS_PIN_DPB; + break; + case PORT_C: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_2_BXT; + else + ddc_pin = GMBUS_PIN_DPC; + break; + case PORT_D: + if (IS_CHERRYVIEW(dev_priv)) + ddc_pin = GMBUS_PIN_DPD_CHV; + else + ddc_pin = GMBUS_PIN_DPD; + break; + default: + MISSING_CASE(port); + ddc_pin = GMBUS_PIN_DPB; + break; + } + + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (platform default)\n", + ddc_pin, port_name(port)); + + return ddc_pin; +} + void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, struct intel_connector *intel_connector) { @@ -1808,7 +1852,6 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = to_i915(dev); enum port port = intel_dig_port->port; - uint8_t alternate_ddc_pin; DRM_DEBUG_KMS("Adding HDMI connector on port %c\n", port_name(port)); @@ -1826,12 +1869,10 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, connector->doublescan_allowed = 0; connector->stereo_allowed = 1; + intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port); + switch (port) { case PORT_B: - if (IS_BROXTON(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_1_BXT; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; /* * On BXT A0/A1, sw needs to activate DDIA HPD logic and * interrupts to check the external panel connection. @@ -1842,46 +1883,17 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, intel_encoder->hpd_pin = HPD_PORT_B; break; case PORT_C: - if (IS_BROXTON(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_2_BXT; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; intel_encoder->hpd_pin = HPD_PORT_C; break; case PORT_D: - if (WARN_ON(IS_BROXTON(dev_priv))) - intel_hdmi->ddc_bus = GMBUS_PIN_DISABLED; - else if (IS_CHERRYVIEW(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_DPD_CHV; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; intel_encoder->hpd_pin = HPD_PORT_D; break; case PORT_E: - /* On SKL PORT E doesn't have seperate GMBUS pin - * We rely on VBT to set a proper alternate GMBUS pin. */ - alternate_ddc_pin = - dev_priv->vbt.ddi_port_info[PORT_E].alternate_ddc_pin; - switch (alternate_ddc_pin) { - case DDC_PIN_B: - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; - break; - case DDC_PIN_C: - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; - break; - case DDC_PIN_D: - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; - break; - default: - MISSING_CASE(alternate_ddc_pin); - } intel_encoder->hpd_pin = HPD_PORT_E; break; - case PORT_A: - intel_encoder->hpd_pin = HPD_PORT_A; - /* Internal port only for eDP. */ default: - BUG(); + MISSING_CASE(port); + return; } if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { From cdffe3e252bb55e82ee89bbdfe8d2f18b6157c28 Mon Sep 17 00:00:00 2001 From: Lyude Date: Wed, 26 Oct 2016 12:36:09 -0400 Subject: [PATCH 130/224] drm/i915/vlv: Prevent enabling hpd polling in late suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit One of the CI machines began to run into issues with the hpd poller suddenly waking up in the midst of the late suspend phase. It looks like this is getting caused by the fact we now deinitialize power wells in late suspend, which means that intel_hpd_poll_init() gets called in late suspend causing polling to get re-enabled. So, when deinitializing power wells on valleyview we now refrain from enabling polling in the midst of suspend. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040 Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd") Signed-off-by: Lyude Cc: Ville Syrjälä Cc: Jani Saarinen Cc: Petry Latvala Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com (cherry picked from commit b64b540931483cca3200d98756bed6ad0e01d75c) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_runtime_pm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index 6c11168facd6..a38c2fefe85a 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -1139,7 +1139,9 @@ static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv) intel_power_sequencer_reset(dev_priv); - intel_hpd_poll_init(dev_priv); + /* Prevent us from re-enabling polling on accident in late suspend */ + if (!dev_priv->drm.dev->power.is_suspended) + intel_hpd_poll_init(dev_priv); } static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, From fbb21c5202ae7f1e71e832b1af59fb047da6383e Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Tue, 1 Nov 2016 11:47:59 -0700 Subject: [PATCH 131/224] drm/i915/dp: BDW cdclk fix for DP audio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. From BSpec: "Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)] Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may be audio corruption or screen corruption." Since, some DP configurations (e.g., MST) use port width x4 and HBR2 link rate, let's increase the cdclk to >= 432 MHz to enable audio for those cases. v4: Changed commit message v3: Combine BDW pixel rate adjustments into a function (Jani) v2: Restrict fix to BDW Retain the set cdclk across modesets (Ville) Cc: stable@vger.kernel.org Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Ville Syrjälä Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com (cherry picked from commit b30ce9e0552aa017ac6f2243f3c2d8e36fe52e69) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0ad1879bfd9d..4f57f8c6074e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10243,6 +10243,27 @@ static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) bxt_set_cdclk(to_i915(dev), req_cdclk); } +static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, + int pixel_rate) +{ + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ + if (crtc_state->ips_enabled) + pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + + /* BSpec says "Do not use DisplayPort with CDCLK less than + * 432 MHz, audio enabled, port width x4, and link rate + * HBR2 (5.4 GHz), or else there may be audio corruption or + * screen corruption." + */ + if (intel_crtc_has_dp_encoder(crtc_state) && + crtc_state->has_audio && + crtc_state->port_clock >= 540000 && + crtc_state->lane_count == 4) + pixel_rate = max(432000, pixel_rate); + + return pixel_rate; +} + /* compute the max rate for new configuration */ static int ilk_max_pixel_rate(struct drm_atomic_state *state) { @@ -10268,9 +10289,9 @@ static int ilk_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = ilk_pipe_pixel_rate(crtc_state); - /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ - if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) - pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + if (IS_BROADWELL(dev_priv)) + pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state, + pixel_rate); intel_state->min_pixclk[i] = pixel_rate; } From 61e0c5438866d0e737937fc35d752538960e1e9f Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Wed, 2 Nov 2016 13:13:21 -0700 Subject: [PATCH 132/224] drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. Let's apply this work around to GEN9 platforms too, as it fixes the same issue. v2: Move drm_device to drm_i915_private conversion Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907 Cc: stable@vger.kernel.org Cc: Libin Yang Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com (cherry picked from commit 9c7540241885838cfc7fa58c4a8bd75be0303ed1) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4f57f8c6074e..81c11499bcf0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10246,8 +10246,10 @@ static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, int pixel_rate) { + struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev); + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ - if (crtc_state->ips_enabled) + if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); /* BSpec says "Do not use DisplayPort with CDCLK less than @@ -10289,7 +10291,7 @@ static int ilk_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = ilk_pipe_pixel_rate(crtc_state); - if (IS_BROADWELL(dev_priv)) + if (IS_BROADWELL(dev_priv) || IS_GEN9(dev_priv)) pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state, pixel_rate); From c4b8c570447a7bc171829532269878345b3ea9d0 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 10:54:43 +0000 Subject: [PATCH 133/224] drm/i915: Round tile chunks up for constructing partial VMAs When we split a large object up into chunks for GTT faulting (because we can't fit the whole object into the aperture) we have to align our cuts with the fence registers. Each partial VMA must cover a complete set of tile rows or the offset into each partial VMA is not aligned with the whole image. Currently we enforce a minimum size on each partial VMA, but this minimum size itself was not aligned to the tile row causing distortion. Reported-by: Andreas Reis Reported-by: Chris Clayton Reported-by: Norbert Preining Tested-by: Norbert Preining Tested-by: Chris Clayton Fixes: 03af84fe7f48 ("drm/i915: Choose partial chunksize based on tile row size") Fixes: a61007a83a46 ("drm/i915: Fix partial GGTT faulting") # enabling patch Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402 Testcase: igt/gem_mmap_gtt/medium-copy-odd Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Jani Nikula Cc: # v4.9-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit 0ef723cbceb6dce8116e75d44c5b8679b2eba69a) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 23960de81b57..44b3f01faed3 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1806,7 +1806,7 @@ int i915_gem_fault(struct vm_area_struct *area, struct vm_fault *vmf) /* Use a partial view if it is bigger than available space */ chunk_size = MIN_CHUNK_PAGES; if (i915_gem_object_is_tiled(obj)) - chunk_size = max(chunk_size, tile_row_pages(obj)); + chunk_size = roundup(chunk_size, tile_row_pages(obj)); memset(&view, 0, sizeof(view)); view.type = I915_GGTT_VIEW_PARTIAL; From 54905ab5fe7aa453610e31cec640e528aaedb2e2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 11:01:28 +0000 Subject: [PATCH 134/224] drm/i915: Limit Valleyview and earlier to only using mappable scanout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Valleyview appears to be limited to only scanning out from the first 512MiB of the Global GTT. Lets presume that this behaviour was inherited from the display block copied from g4x (not Ironlake) and all earlier generations are similarly affected, though testing suggests different symptoms. For simplicity, impose that these platforms must scanout from the mappable region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this catches Cherryview which does not appear to be limited to the low aperture for its scanout.) v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about limiting this workaround to the old style of display engine. v3: Update changelog to reflect testing by Ville Syrjälä v4: Include the changes to the comments as well Reported-by: Luis Botello Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036 Fixes: 2efb813d5388 ("drm/i915: Fallback to using unmappable memory for scanout") Signed-off-by: Chris Wilson Cc: Akash Goel Cc: Joonas Lahtinen Cc: Ville Syrjälä Cc: # v4.9-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk Reviewed-by: Ville Syrjälä (cherry picked from commit 767a222e47cc13239d38018887f911fec06169ea) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 44b3f01faed3..91ab7e9d6d2e 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3543,8 +3543,22 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, if (view->type == I915_GGTT_VIEW_NORMAL) vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, PIN_MAPPABLE | PIN_NONBLOCK); - if (IS_ERR(vma)) - vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, 0); + if (IS_ERR(vma)) { + struct drm_i915_private *i915 = to_i915(obj->base.dev); + unsigned int flags; + + /* Valleyview is definitely limited to scanning out the first + * 512MiB. Lets presume this behaviour was inherited from the + * g4x display engine and that all earlier gen are similarly + * limited. Testing suggests that it is a little more + * complicated than this. For example, Cherryview appears quite + * happy to scanout from anywhere within its global aperture. + */ + flags = 0; + if (HAS_GMCH_DISPLAY(i915)) + flags = PIN_MAPPABLE; + vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, flags); + } if (IS_ERR(vma)) goto err_unpin_display; From 757124d95c42bb579d67df51e51789849929ee31 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 3 Nov 2016 17:47:51 -0400 Subject: [PATCH 135/224] drm/amdgpu: fix crash in acp_hw_fini On CZ/ST systems with AZ rather than ACP audio, we need to bail early in hw_fini since there is nothing to do. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98276 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c index 892d60fb225b..2057683f7b59 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c @@ -395,9 +395,12 @@ static int acp_hw_fini(void *handle) { int i, ret; struct device *dev; - struct amdgpu_device *adev = (struct amdgpu_device *)handle; + /* return early if no ACP */ + if (!adev->acp.acp_genpd) + return 0; + for (i = 0; i < ACP_DEVS ; i++) { dev = get_mfd_cell_dev(adev->acp.acp_cell[i].name, i); ret = pm_genpd_remove_device(&adev->acp.acp_genpd->gpd, dev); From e6e335bf3a400bc3b5a65322a891318a25749769 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 7 Nov 2016 10:36:46 -0800 Subject: [PATCH 136/224] ARC: change return value of userspace cmpxchg assist syscall The original syscall only used to return errno to indicate if cmpxchg succeeded. It was not returning the "previous" value which typical cmpxchg callers are interested in to build their slowpaths or retry loops. Given user preemption in syscall return path etc, it is not wise to check this in userspace afterwards, but should be what kernel actually observed in the syscall. So change the syscall interface to always return the previous value and additionally set Z flag to indicate whether operation succeeded or not (just like ARM implementation when they used to have this syscall) The flag approach avoids having to put_user errno which is nice given the use case for this syscall cares mostly about the "previous" value. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/arcregs.h | 2 ++ arch/arc/kernel/process.c | 20 +++++++++++--------- 2 files changed, 13 insertions(+), 9 deletions(-) diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index 7f3f9f63708c..1bd24ec3e350 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -43,12 +43,14 @@ #define STATUS_AE_BIT 5 /* Exception active */ #define STATUS_DE_BIT 6 /* PC is in delay slot */ #define STATUS_U_BIT 7 /* User/Kernel mode */ +#define STATUS_Z_BIT 11 #define STATUS_L_BIT 12 /* Loop inhibit */ /* These masks correspond to the status word(STATUS_32) bits */ #define STATUS_AE_MASK (1<status32 &= ~STATUS_Z_MASK; + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) return -EFAULT; preempt_disable(); - ret = __get_user(uval, uaddr); - if (ret) + if (__get_user(uval, uaddr)) goto done; - if (uval != expected) - ret = -EAGAIN; - else - ret = __put_user(new, uaddr); + if (uval == expected) { + if (!__put_user(new, uaddr)) + regs->status32 |= STATUS_Z_MASK; + } done: preempt_enable(); - return ret; + return uval; } void arch_cpu_idle(void) From 922cc171998ac3dbe74d57011ef7ed57e9b0d7df Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 31 Oct 2016 14:09:52 -0700 Subject: [PATCH 137/224] ARC: timer: rtc: implement read loop in "C" vs. inline asm The current code doesn't even compile as somehow the inline assembly can't see the register names defined as ARC_RTC_* I'm pretty sure It worked when I first got it merged, but the tools were definitely different then. So better to write this in "C" anyways. CC: stable@vger.kernel.org #4.2+ Acked-by: Daniel Lezcano Signed-off-by: Vineet Gupta --- arch/arc/kernel/time.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index f927b8dc6edd..c10390d1ddb6 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -152,14 +152,17 @@ static cycle_t arc_read_rtc(struct clocksource *cs) cycle_t full; } stamp; - - __asm__ __volatile( - "1: \n" - " lr %0, [AUX_RTC_LOW] \n" - " lr %1, [AUX_RTC_HIGH] \n" - " lr %2, [AUX_RTC_CTRL] \n" - " bbit0.nt %2, 31, 1b \n" - : "=r" (stamp.low), "=r" (stamp.high), "=r" (status)); + /* + * hardware has an internal state machine which tracks readout of + * low/high and updates the CTRL.status if + * - interrupt/exception taken between the two reads + * - high increments after low has been read + */ + do { + stamp.low = read_aux_reg(AUX_RTC_LOW); + stamp.high = read_aux_reg(AUX_RTC_HIGH); + status = read_aux_reg(AUX_RTC_CTRL); + } while (!(status & _BITUL(31))); return stamp.full; } From bb29dd84333a96f309c6d0f88b285b5b78927058 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 26 Oct 2016 10:33:31 -0400 Subject: [PATCH 138/224] SUNRPC: Fix suspicious RCU usage We need to hold the rcu_read_lock() when calling rcu_dereference(), otherwise we can't guarantee that the object being dereferenced still exists. Fixes: 39e5d2df ("SUNRPC search xprt switch for sockaddr") Signed-off-by: Anna Schumaker --- net/sunrpc/clnt.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 34dd7b26ee5f..62a482790937 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -2753,14 +2753,18 @@ EXPORT_SYMBOL_GPL(rpc_cap_max_reconnect_timeout); void rpc_clnt_xprt_switch_put(struct rpc_clnt *clnt) { + rcu_read_lock(); xprt_switch_put(rcu_dereference(clnt->cl_xpi.xpi_xpswitch)); + rcu_read_unlock(); } EXPORT_SYMBOL_GPL(rpc_clnt_xprt_switch_put); void rpc_clnt_xprt_switch_add_xprt(struct rpc_clnt *clnt, struct rpc_xprt *xprt) { + rcu_read_lock(); rpc_xprt_switch_add_xprt(rcu_dereference(clnt->cl_xpi.xpi_xpswitch), xprt); + rcu_read_unlock(); } EXPORT_SYMBOL_GPL(rpc_clnt_xprt_switch_add_xprt); @@ -2770,9 +2774,8 @@ bool rpc_clnt_xprt_switch_has_addr(struct rpc_clnt *clnt, struct rpc_xprt_switch *xps; bool ret; - xps = rcu_dereference(clnt->cl_xpi.xpi_xpswitch); - rcu_read_lock(); + xps = rcu_dereference(clnt->cl_xpi.xpi_xpswitch); ret = rpc_xprt_switch_has_addr(xps, sap); rcu_read_unlock(); return ret; From 8ef3295530ddc969ea9a3f307d94df97fcbc0629 Mon Sep 17 00:00:00 2001 From: Petr Vandrovec Date: Mon, 7 Nov 2016 12:11:29 -0800 Subject: [PATCH 139/224] NFS: Ignore connections that have cl_rpcclient uninitialized cl_rpcclient starts as ERR_PTR(-EINVAL), and connections like that are floating freely through the system. Most places check whether pointer is valid before dereferencing it, but newly added code in nfs_match_client does not. Which causes crashes when more than one NFS mount point is present. Signed-off-by: Petr Vandrovec Signed-off-by: Anna Schumaker --- fs/nfs/client.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 7555ba889d1f..ebecfb8fba06 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -314,7 +314,8 @@ static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *dat /* Match the full socket address */ if (!rpc_cmp_addr_port(sap, clap)) /* Match all xprt_switch full socket addresses */ - if (!rpc_clnt_xprt_switch_has_addr(clp->cl_rpcclient, + if (IS_ERR(clp->cl_rpcclient) || + !rpc_clnt_xprt_switch_has_addr(clp->cl_rpcclient, sap)) continue; From 192747166a468dd8fb5d47ad9d5048c138c1fc25 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 26 Oct 2016 15:54:31 -0400 Subject: [PATCH 140/224] NFS: Don't print a pNFS error if we aren't using pNFS We used to check for a valid layout type id before verifying pNFS flags as an indicator for if we are using pNFS. This changed in 3132e49ece with the introduction of multiple layout types, since now we are passing an array of ids instead of just one. Since then, users have been seeing a KERN_ERR printk show up whenever mounting NFS v4 without pNFS. This patch restores the original behavior of exiting set_pnfs_layoutdriver() early if we aren't using pNFS. Fixes 3132e49ece ("pnfs: track multiple layout types in fsinfo structure") Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker --- fs/nfs/pnfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 56b2d96f9103..259ef85f435a 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -146,6 +146,8 @@ set_pnfs_layoutdriver(struct nfs_server *server, const struct nfs_fh *mntfh, u32 id; int i; + if (fsinfo->nlayouttypes == 0) + goto out_no_driver; if (!(server->nfs_client->cl_exchange_flags & (EXCHGID4_FLAG_USE_NON_PNFS | EXCHGID4_FLAG_USE_PNFS_MDS))) { printk(KERN_ERR "NFS: %s: cl_exchange_flags 0x%x\n", From 0ac84b72c0ed96ace1d8973a06f0120a3b905177 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 7 Nov 2016 10:48:16 -0700 Subject: [PATCH 141/224] fs/nfs: Fix used uninitialized warn in nfs4_slot_seqid_in_use() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following warn: fs/nfs/nfs4session.c: In function ‘nfs4_slot_seqid_in_use’: fs/nfs/nfs4session.c:203:54: warning: ‘cur_seq’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (nfs4_slot_get_seqid(tbl, slotid, &cur_seq) == 0 && ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~ cur_seq == seq_nr && test_bit(slotid, tbl->used_slots)) ~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Signed-off-by: Anna Schumaker --- fs/nfs/nfs4session.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index 150c5a1879bf..a61350f75c74 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -198,7 +198,7 @@ static int nfs4_slot_get_seqid(struct nfs4_slot_table *tbl, u32 slotid, static bool nfs4_slot_seqid_in_use(struct nfs4_slot_table *tbl, u32 slotid, u32 seq_nr) { - u32 cur_seq; + u32 cur_seq = 0; bool ret = false; spin_lock(&tbl->slot_tbl_lock); From 7f8d61f005228fc48e6e2ca3c9af3302cd4870af Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 3 Nov 2016 13:09:24 +0100 Subject: [PATCH 142/224] percpu: use notrace variant of preempt_disable/preempt_enable Commit 345ddcc882d8 ("ftrace: Have set_ftrace_pid use the bitmap like events do") added a couple of this_cpu_read calls to the ftrace code. On x86 this is not a problem, since it has single instructions to read percpu data. Other architectures which use the generic variant now have additional preempt_disable and preempt_enable calls in the core ftrace code. This may lead to recursive calls and in result to a dead machine, e.g. if preemption and debugging options are enabled. To fix this use the notrace variant of preempt_disable and preempt_enable within the generic percpu code. Reported-and-bisected-by: Sebastian Ott Tested-by: Sebastian Ott Fixes: 345ddcc882d8 ("ftrace: Have set_ftrace_pid use the bitmap like events do") Signed-off-by: Heiko Carstens Acked-by: Steven Rostedt Signed-off-by: Martin Schwidefsky --- include/asm-generic/percpu.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h index 40e887068da2..0504ef8f3aa3 100644 --- a/include/asm-generic/percpu.h +++ b/include/asm-generic/percpu.h @@ -118,9 +118,9 @@ do { \ #define this_cpu_generic_read(pcp) \ ({ \ typeof(pcp) __ret; \ - preempt_disable(); \ + preempt_disable_notrace(); \ __ret = raw_cpu_generic_read(pcp); \ - preempt_enable(); \ + preempt_enable_notrace(); \ __ret; \ }) From 027a9fe6835620422b6713892175716f3613dd9d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 30 Oct 2016 22:18:45 +0100 Subject: [PATCH 143/224] ALSA: info: Limit the proc text input size The ALSA proc handler allows currently the write in the unlimited size until kmalloc() fails. But basically the write is supposed to be only for small inputs, mostly for one line inputs, and we don't have to handle too large sizes at all. Since the kmalloc error results in the kernel warning, it's better to limit the size beforehand. This patch adds the limit of 16kB, which must be large enough for the currently existing code. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Takashi Iwai --- sound/core/info.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/core/info.c b/sound/core/info.c index 895362a696c9..291d6ed80d80 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -329,6 +329,9 @@ static ssize_t snd_info_text_entry_write(struct file *file, if (!valid_pos(pos, count)) return -EIO; next = pos + count; + /* don't handle too large text inputs */ + if (next > 16 * 1024) + return -EIO; mutex_lock(&entry->access); buf = data->wbuffer; if (!buf) { From 6809cd682b82dfff47943850d1a8c714f971b5ca Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 30 Oct 2016 22:13:19 +0100 Subject: [PATCH 144/224] ALSA: info: Return error for invalid read/write Currently the ALSA proc handler allows read or write even if the proc file were write-only or read-only. It's mostly harmless, does thing but allocating memory and ignores the input/output. But it doesn't tell user about the invalid use, and it's confusing and inconsistent in comparison with other proc files. This patch adds some sanity checks and let the proc handler returning an -EIO error when the invalid read/write is performed. Cc: # v4.2+ Signed-off-by: Takashi Iwai --- sound/core/info.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/core/info.c b/sound/core/info.c index 291d6ed80d80..8ab72e0f5932 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -325,6 +325,8 @@ static ssize_t snd_info_text_entry_write(struct file *file, size_t next; int err = 0; + if (!entry->c.text.write) + return -EIO; pos = *offset; if (!valid_pos(pos, count)) return -EIO; @@ -369,7 +371,9 @@ static int snd_info_seq_show(struct seq_file *seq, void *p) struct snd_info_private_data *data = seq->private; struct snd_info_entry *entry = data->entry; - if (entry->c.text.read) { + if (!entry->c.text.read) { + return -EIO; + } else { data->rbuffer->buffer = (char *)seq; /* XXX hack! */ entry->c.text.read(entry, data->rbuffer); } From fba4f8e5c49443ddb1511f8f548ac801a693d7b7 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Mon, 17 Oct 2016 12:06:21 +0100 Subject: [PATCH 145/224] iommu/arm-smmu: Work around ARM DMA configuration The 32-bit ARM DMA configuration code predates the IOMMU core's default domain functionality, and instead relies on allocating its own domains and attaching any devices using the generic IOMMU binding to them. Unfortunately, it does this relatively early on in the creation of the device, before we've seen our add_device callback, which leads us to attempt to operate on a half-configured master. To avoid a crash, check for this situation on attach, but refuse to play, as there's nothing we can do. This at least allows VFIO to keep working for people who update their 32-bit DTs to the generic binding, albeit with a few (innocuous) warnings from the DMA layer on boot. Signed-off-by: Robin Murphy Signed-off-by: Will Deacon Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index c841eb7a1a74..3af7f8f62d0a 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1228,6 +1228,16 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev) return -ENXIO; } + /* + * FIXME: The arch/arm DMA API code tries to attach devices to its own + * domains between of_xlate() and add_device() - we have no way to cope + * with that, so until ARM gets converted to rely on groups and default + * domains, just say no (but more politely than by dereferencing NULL). + * This should be at least a WARN_ON once that's sorted. + */ + if (!fwspec->iommu_priv) + return -ENODEV; + smmu = fwspec_smmu(fwspec); /* Ensure that the domain is finalised */ ret = arm_smmu_init_domain_context(domain, smmu); From ec615f43d3b61edcfdc4d8d1f672be1059573d1b Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Thu, 3 Nov 2016 17:39:07 +0000 Subject: [PATCH 146/224] iommu/arm-smmu: Don't inadvertently reject multiple SMMUv3s We now delay installing our per-bus iommu_ops until we know an SMMU has successfully probed, as they don't serve much purpose beforehand, and doing so also avoids fights between multiple IOMMU drivers in a single kernel. However, the upshot of passing the return value of bus_set_iommu() back from our probe function is that if there happens to be more than one SMMUv3 device in a system, the second and subsequent probes will wind up returning -EBUSY to the driver core and getting torn down again. Avoid re-setting ops if ours are already installed, so that any genuine failures stand out. Fixes: 08d4ca2a672b ("iommu/arm-smmu: Support non-PCI devices with SMMUv3") CC: Lorenzo Pieralisi CC: Hanjun Guo Signed-off-by: Robin Murphy Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu-v3.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 15c01c3cd540..e6f9b2d745ca 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -2636,17 +2636,26 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev) /* And we're up. Go go go! */ of_iommu_set_ops(dev->of_node, &arm_smmu_ops); #ifdef CONFIG_PCI - pci_request_acs(); - ret = bus_set_iommu(&pci_bus_type, &arm_smmu_ops); - if (ret) - return ret; + if (pci_bus_type.iommu_ops != &arm_smmu_ops) { + pci_request_acs(); + ret = bus_set_iommu(&pci_bus_type, &arm_smmu_ops); + if (ret) + return ret; + } #endif #ifdef CONFIG_ARM_AMBA - ret = bus_set_iommu(&amba_bustype, &arm_smmu_ops); - if (ret) - return ret; + if (amba_bustype.iommu_ops != &arm_smmu_ops) { + ret = bus_set_iommu(&amba_bustype, &arm_smmu_ops); + if (ret) + return ret; + } #endif - return bus_set_iommu(&platform_bus_type, &arm_smmu_ops); + if (platform_bus_type.iommu_ops != &arm_smmu_ops) { + ret = bus_set_iommu(&platform_bus_type, &arm_smmu_ops); + if (ret) + return ret; + } + return 0; } static int arm_smmu_device_remove(struct platform_device *pdev) From 3c117b543528b0d25801bd75444037dd0fcd2b8d Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 2 Nov 2016 17:31:32 +0000 Subject: [PATCH 147/224] iommu/arm-smmu: Check that iommu_fwspecs are ours We seem to have forgotten to check that iommu_fwspecs actually belong to us before we go ahead and dereference their private data. Oops. Fixes: 021bb8420d44 ("iommu/arm-smmu: Wire up generic configuration support") Signed-off-by: Robin Murphy Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 3af7f8f62d0a..d388629ab990 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1400,7 +1400,7 @@ static int arm_smmu_add_device(struct device *dev) fwspec = dev->iommu_fwspec; if (ret) goto out_free; - } else if (fwspec) { + } else if (fwspec && fwspec->ops == &arm_smmu_ops) { smmu = arm_smmu_get_by_node(to_of_node(fwspec->iommu_fwnode)); } else { return -ENODEV; From 8c82d6ec5abcf9691d37f329bf5f42f6868405db Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Mon, 7 Nov 2016 18:25:09 +0000 Subject: [PATCH 148/224] iommu/arm-smmu: Fix out-of-bounds dereference When we iterate a master's config entries, what we generally care about is the entry's stream map index, rather than the entry index itself, so it's nice to have the iterator automatically assign the former from the latter. Unfortunately, booting with KASAN reveals the oversight that using a simple comma operator results in the entry index being dereferenced before being checked for validity, so we always access one element past the end of the fwspec array. Flip things around so that the check always happens before the index may be dereferenced. Fixes: adfec2e709d2 ("iommu/arm-smmu: Convert to iommu_fwspec") Reported-by: Mark Rutland Signed-off-by: Robin Murphy Acked-by: Will Deacon Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index d388629ab990..8f7281444551 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -324,8 +324,10 @@ struct arm_smmu_master_cfg { #define INVALID_SMENDX -1 #define __fwspec_cfg(fw) ((struct arm_smmu_master_cfg *)fw->iommu_priv) #define fwspec_smmu(fw) (__fwspec_cfg(fw)->smmu) +#define fwspec_smendx(fw, i) \ + (i >= fw->num_ids ? INVALID_SMENDX : __fwspec_cfg(fw)->smendx[i]) #define for_each_cfg_sme(fw, i, idx) \ - for (i = 0; idx = __fwspec_cfg(fw)->smendx[i], i < fw->num_ids; ++i) + for (i = 0; idx = fwspec_smendx(fw, i), i < fw->num_ids; ++i) struct arm_smmu_device { struct device *dev; From bea64033dd7b5fb6296eda8266acab6364ce1554 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 8 Nov 2016 15:08:26 +0100 Subject: [PATCH 149/224] iommu/vt-d: Fix dead-locks in disable_dmar_iommu() path It turns out that the disable_dmar_iommu() code-path tried to get the device_domain_lock recursivly, which will dead-lock when this code runs on dmar removal. Fix both code-paths that could lead to the dead-lock. Fixes: 55d940430ab9 ('iommu/vt-d: Get rid of domain->iommu_lock') Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index a4407eabf0e6..3965e73db51c 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -1711,6 +1711,7 @@ static void disable_dmar_iommu(struct intel_iommu *iommu) if (!iommu->domains || !iommu->domain_ids) return; +again: spin_lock_irqsave(&device_domain_lock, flags); list_for_each_entry_safe(info, tmp, &device_domain_list, global) { struct dmar_domain *domain; @@ -1723,10 +1724,19 @@ static void disable_dmar_iommu(struct intel_iommu *iommu) domain = info->domain; - dmar_remove_one_dev_info(domain, info->dev); + __dmar_remove_one_dev_info(info); - if (!domain_type_is_vm_or_si(domain)) + if (!domain_type_is_vm_or_si(domain)) { + /* + * The domain_exit() function can't be called under + * device_domain_lock, as it takes this lock itself. + * So release the lock here and re-run the loop + * afterwards. + */ + spin_unlock_irqrestore(&device_domain_lock, flags); domain_exit(domain); + goto again; + } } spin_unlock_irqrestore(&device_domain_lock, flags); From a29d126027c781eaa305ecae432bb04d41e198c5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 8 Nov 2016 14:52:18 +0100 Subject: [PATCH 150/224] drm/amdgpu/powerplay/smu7: fix unintialized data usage A recent bugfix replaced an out-of-bounds access with direct use of unintialized data: drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function 'smu7_patch_limits_vddc': drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddc' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:11: note: 'vddc' was declared here drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddci' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:17: note: 'vddci' was declared here uint32_t vddc, vddci; This initializes the data as before using the correct type. Fixes: 77f7f71f5be1 ("drm/amdgpu/powerplay/smu7: fix static checker warning") Signed-off-by: Arnd Bergmann Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 75854021f403..51fb86f20c21 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -2133,9 +2133,11 @@ static int smu7_patch_limits_vddc(struct pp_hwmgr *hwmgr, struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); if (tab) { + vddc = tab->vddc; smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddc, &data->vddc_leakage); tab->vddc = vddc; + vddci = tab->vddci; smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddci, &data->vddci_leakage); tab->vddci = vddci; From f20024d8ba6bc8abf8d0ec12eabfdedd9935fff2 Mon Sep 17 00:00:00 2001 From: Andrew Shadura Date: Thu, 3 Nov 2016 11:09:24 +0100 Subject: [PATCH 151/224] drm/amd/powerplay: return false instead of -EINVAL Returning -EINVAL from a bool-returning function phm_check_smc_update_required_for_display_configuration has an unexpected effect of returning true, which is probably not what was intended. Replace -EINVAL by false. The only place this function is called from is psm_adjust_power_state_dynamic in drivers/gpu/drm/amd/powerplay/eventmgr/psm.c:106: if (!equal || phm_check_smc_update_required_for_display_configuration(hwmgr)) { phm_apply_state_adjust_rules(hwmgr, requested, pcurrent); phm_set_power_state(hwmgr, &pcurrent->hardware, &requested->hardware); hwmgr->current_ps = requested; } It seems to expect a boolean value here. This issue has been found using the following Coccinelle semantic patch written by Peter Senna Tschudin: @@ identifier f; constant C; typedef bool; @@ bool f (...){ <+... * return -C; ...+> } Reviewed-by: Alex Deucher Signed-off-by: Andrew Shadura Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c index 14f8c1f4da3d..0723758ed065 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c @@ -272,7 +272,7 @@ bool phm_check_smc_update_required_for_display_configuration(struct pp_hwmgr *hw PHM_FUNC_CHECK(hwmgr); if (hwmgr->hwmgr_func->check_smc_update_required_for_display_configuration == NULL) - return -EINVAL; + return false; return hwmgr->hwmgr_func->check_smc_update_required_for_display_configuration(hwmgr); } From 76a08404742e6da79f1e5002ac39033dc79d94da Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 8 Nov 2016 08:47:14 -0800 Subject: [PATCH 152/224] Revert "ARC: build: retire old toggles" This has caused a bunch of build failures at a few sites, with GNU 2015.12 and older as the assembler seems to need -mlock to be able to grok llock/scond instructions for ARC700 builds. different places since the older tools still seem to release of tools which most people are using seem to trip with the -mlock flag not being passed. This reverts commit c3005475889c7c730638f95d13be3360f0b33e98. --- arch/arc/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 864adad52280..aa82d13d4213 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -50,6 +50,9 @@ atleast_gcc44 := $(call cc-ifversion, -ge, 0404, y) cflags-$(atleast_gcc44) += -fsection-anchors +cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock +cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape + ifdef CONFIG_ISA_ARCV2 ifndef CONFIG_ARC_HAS_LL64 From 66619433d0fdf3e7d9f573993217b0d2cc3044fa Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Tue, 8 Nov 2016 11:58:23 +0200 Subject: [PATCH 153/224] ARC: [plat-eznps] remove IPI clear from SMP operations Today we register to plat_smp_ops.clear() method which actually is acking the IPI. However this is already taking care by our irqchip driver specifically by the irq_chip.irq_eoi() method. This is perfect timing where it should be done and no special handling is needed at plat_smp_ops.clear(). Signed-off-by: Noam Camus Signed-off-by: Vineet Gupta --- arch/arc/plat-eznps/smp.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/arc/plat-eznps/smp.c b/arch/arc/plat-eznps/smp.c index 5e901f86e4bd..56a4c8522f11 100644 --- a/arch/arc/plat-eznps/smp.c +++ b/arch/arc/plat-eznps/smp.c @@ -140,16 +140,10 @@ static void eznps_init_per_cpu(int cpu) mtm_enable_core(cpu); } -static void eznps_ipi_clear(int irq) -{ - write_aux_reg(CTOP_AUX_IACK, 1 << irq); -} - struct plat_smp_ops plat_smp_ops = { .info = smp_cpuinfo_buf, .init_early_smp = eznps_init_cpumasks, .cpu_kick = eznps_smp_wakeup_cpu, .ipi_send = eznps_ipi_send, .init_per_cpu = eznps_init_per_cpu, - .ipi_clear = eznps_ipi_clear, }; From 19dbc76228899be555b84a09fd3a364c2ce86bbb Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Tue, 8 Nov 2016 15:20:59 +0200 Subject: [PATCH 154/224] ARC: [plat-eznps] set default baud for early console For CONFIG_SERIAL_EARLYCON we need 800MHz for NPS SoC The early console driver uses BASE_BAUD and not using dtb. The default of 50MHz is NOT good for NPS SoC. Signed-off-by: Noam Camus Signed-off-by: Vineet Gupta --- arch/arc/kernel/devtree.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c index f1e07c2344f8..3b67f538f142 100644 --- a/arch/arc/kernel/devtree.c +++ b/arch/arc/kernel/devtree.c @@ -31,6 +31,8 @@ static void __init arc_set_early_base_baud(unsigned long dt_root) arc_base_baud = 166666666; /* Fixed 166.6MHz clk (TB10x) */ else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp")) arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x) */ + else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps")) + arc_base_baud = 800000000; /* Fixed 800MHz clk (NPS) */ else arc_base_baud = 50000000; /* Fixed default 50MHz */ } From 34e71e4cbb8eb467dbcfb3afbd2b95ff2b08f482 Mon Sep 17 00:00:00 2001 From: Yuriy Kolerov Date: Tue, 8 Nov 2016 10:08:31 +0300 Subject: [PATCH 155/224] ARC: IRQ: Do not use hwirq as virq and vice versa This came up when reviewing code to address missing IRQ affinity setting in AXS103 platform and/or implementing hierarchical IRQ domains - smp_ipi_irq_setup() callers pass hwirq but in turn calls request_percpu_irq() which expects a linux virq. So invoke irq_find_mapping() to do the conversion (also explicitify this in code by renaming the args appropriately) - idu_of_init()/idu_cascade_isr() were similarly using linux virq where hwirq is expected, so do the conversion using irqd_to_hwirq() helper Signed-off-by: Yuriy Kolerov [vgupta: made changelog a bit concise a bit] Signed-off-by: Vineet Gupta --- arch/arc/include/asm/smp.h | 4 ++-- arch/arc/kernel/mcip.c | 19 +++++++++---------- arch/arc/kernel/smp.c | 13 +++++++++---- 3 files changed, 20 insertions(+), 16 deletions(-) diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index 89fdd1b0a76e..0861007d9ef3 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -37,9 +37,9 @@ extern const char *arc_platform_smp_cpuinfo(void); * API expected BY platform smp code (FROM arch smp code) * * smp_ipi_irq_setup: - * Takes @cpu and @irq to which the arch-common ISR is hooked up + * Takes @cpu and @hwirq to which the arch-common ISR is hooked up */ -extern int smp_ipi_irq_setup(int cpu, int irq); +extern int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq); /* * struct plat_smp_ops - SMP callbacks provided by platform to ARC SMP diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index c424d5abc318..6d18bb871926 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -207,16 +207,15 @@ static struct irq_chip idu_irq_chip = { }; -static int idu_first_irq; +static irq_hw_number_t idu_first_hwirq; static void idu_cascade_isr(struct irq_desc *desc) { - struct irq_domain *domain = irq_desc_get_handler_data(desc); - unsigned int core_irq = irq_desc_get_irq(desc); - unsigned int idu_irq; + struct irq_domain *idu_domain = irq_desc_get_handler_data(desc); + irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc)); + irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq; - idu_irq = core_irq - idu_first_irq; - generic_handle_irq(irq_find_mapping(domain, idu_irq)); + generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq)); } static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq) @@ -282,7 +281,7 @@ idu_of_init(struct device_node *intc, struct device_node *parent) struct irq_domain *domain; /* Read IDU BCR to confirm nr_irqs */ int nr_irqs = of_irq_count(intc); - int i, irq; + int i, virq; struct mcip_bcr mp; READ_BCR(ARC_REG_MCIP_BCR, mp); @@ -303,11 +302,11 @@ idu_of_init(struct device_node *intc, struct device_node *parent) * however we need it to get the parent virq and set IDU handler * as first level isr */ - irq = irq_of_parse_and_map(intc, i); + virq = irq_of_parse_and_map(intc, i); if (!i) - idu_first_irq = irq; + idu_first_hwirq = irqd_to_hwirq(irq_get_irq_data(virq)); - irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain); + irq_set_chained_handler_and_data(virq, idu_cascade_isr, domain); } __mcip_cmd(CMD_IDU_ENABLE, 0); diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index f00029e9cbe4..88674d972c9d 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -353,20 +354,24 @@ irqreturn_t do_IPI(int irq, void *dev_id) */ static DEFINE_PER_CPU(int, ipi_dev); -int smp_ipi_irq_setup(int cpu, int irq) +int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq) { int *dev = per_cpu_ptr(&ipi_dev, cpu); + unsigned int virq = irq_find_mapping(NULL, hwirq); + + if (!virq) + panic("Cannot find virq for root domain and hwirq=%lu", hwirq); /* Boot cpu calls request, all call enable */ if (!cpu) { int rc; - rc = request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev); + rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev); if (rc) - panic("Percpu IRQ request failed for %d\n", irq); + panic("Percpu IRQ request failed for %u\n", virq); } - enable_percpu_irq(irq, 0); + enable_percpu_irq(virq, 0); return 0; } From 0a0a047def15b7c8bcd27671d2be2de3d37fb30d Mon Sep 17 00:00:00 2001 From: Yuriy Kolerov Date: Tue, 8 Nov 2016 10:08:32 +0300 Subject: [PATCH 156/224] ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core ARC linux uses 2 distribution modes for common interrupts: round robin mode (IDU_M_DISTRI_RR) and a simple destination mode (IDU_M_DISTRI_DEST). The first one is used when more than 1 cores may handle a common interrupt and the second one is used when only 1 core may handle a common interrupt. However idu_irq_set_affinity() always sets IDU_M_DISTRI_RR for all affinity values. But there is no sense in setting of such mode if only 1 core must handle a common interrupt. Signed-off-by: Yuriy Kolerov Signed-off-by: Vineet Gupta --- arch/arc/kernel/mcip.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index 6d18bb871926..f39142acc89e 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -181,6 +181,8 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask, { unsigned long flags; cpumask_t online; + unsigned int destination_bits; + unsigned int distribution_mode; /* errout if no online cpu per @cpumask */ if (!cpumask_and(&online, cpumask, cpu_online_mask)) @@ -188,8 +190,15 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask, raw_spin_lock_irqsave(&mcip_lock, flags); - idu_set_dest(data->hwirq, cpumask_bits(&online)[0]); - idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR); + destination_bits = cpumask_bits(&online)[0]; + idu_set_dest(data->hwirq, destination_bits); + + if (ffs(destination_bits) == fls(destination_bits)) + distribution_mode = IDU_M_DISTRI_DEST; + else + distribution_mode = IDU_M_DISTRI_RR; + + idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, distribution_mode); raw_spin_unlock_irqrestore(&mcip_lock, flags); From 16d917b130d782b94fa02afc7bdf0d4aae689da4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 8 Nov 2016 14:25:24 -0600 Subject: [PATCH 157/224] PCI: Don't attempt to claim shadow copies of ROM If we're using a shadow copy of a PCI device ROM, the shadow copy is in RAM and the device never sees accesses to it and doesn't respond to it. We don't have to route the shadow range to the PCI device, and the device doesn't have to claim the range. Previously we treated the shadow copy as though it were the ROM BAR, and we failed to claim it because the region wasn't routed to the device: pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci_bus 0000:01: Allocating resources pci 0000:01:00.0: can't claim BAR 6 [mem 0x000c0000-0x000dffff]: no compatible bridge window The failure path of pcibios_allocate_dev_rom_resource() cleared out the resource start address, which also caused the following ioremap() warning: WARNING: CPU: 0 PID: 116 at /build/linux-akdJXO/linux-4.8.0/arch/x86/mm/ioremap.c:121 __ioremap_caller+0x1ec/0x370 ioremap on RAM at 0x0000000000000000 - 0x000000000001ffff Handle an option ROM shadow copy as RAM, without trying to insert it into the iomem resource tree. This fixes a regression caused by 0c0e0736acad ("PCI: Set ROM shadow location in arch code, not in PCI core"), which appeared in v4.6. The regression causes video device initialization to fail. This was reported on AMD Turks, but it likely affects others as well. Fixes: 0c0e0736acad ("PCI: Set ROM shadow location in arch code, not in PCI core") Reported-and-tested-by: Vecu Bosseur Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1627496 Link: https://bugzilla.kernel.org/show_bug.cgi?id=175391 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1352272 Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v4.6+ --- drivers/pci/setup-res.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 66c4d8f42233..9526e341988b 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -121,6 +121,14 @@ int pci_claim_resource(struct pci_dev *dev, int resource) return -EINVAL; } + /* + * If we have a shadow copy in RAM, the PCI device doesn't respond + * to the shadow range, so we don't need to claim it, and upstream + * bridges don't need to route the range to the device. + */ + if (res->flags & IORESOURCE_ROM_SHADOW) + return 0; + root = pci_find_parent_resource(dev, res); if (!root) { dev_info(&dev->dev, "can't claim BAR %d %pR: no compatible bridge window\n", From 69e2d1e6c0af0dd7f18cfd434b008844568641a9 Mon Sep 17 00:00:00 2001 From: Varun Prakash Date: Sat, 5 Nov 2016 21:49:28 +0530 Subject: [PATCH 158/224] scsi: libcxgbi: fix incorrect DDP resource cleanup Before calling task_release_itt() task data is memset to zero because of which DDP context information is lost resulting in incorrect DDP resource cleanup, to fix this call task_release_itt() before memset. Signed-off-by: Varun Prakash Signed-off-by: Martin K. Petersen --- drivers/scsi/cxgbi/libcxgbi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index d1421139e6ea..2ffe029ff2b6 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -2081,9 +2081,10 @@ void cxgbi_cleanup_task(struct iscsi_task *task) /* never reached the xmit task callout */ if (tdata->skb) __kfree_skb(tdata->skb); - memset(tdata, 0, sizeof(*tdata)); task_release_itt(task, task->hdr_itt); + memset(tdata, 0, sizeof(*tdata)); + iscsi_tcp_cleanup_task(task); } EXPORT_SYMBOL_GPL(cxgbi_cleanup_task); From 04dfaa53a0b6e66b328a5bc549e3af8f8b6eac02 Mon Sep 17 00:00:00 2001 From: Mauricio Faria de Oliveira Date: Mon, 7 Nov 2016 17:53:30 -0200 Subject: [PATCH 159/224] scsi: qla2xxx: do not queue commands when unloading When the driver is unloading, in qla2x00_remove_one(), there is a single call/point in time to abort ongoing commands, qla2x00_abort_all_cmds(), which is still several steps away from the call to scsi_remove_host(). If more commands continue to arrive and be processed during that interval, when the driver is tearing down and releasing its structures, it might potentially hit an oops due to invalid memory access: Unable to handle kernel paging request for data at address 0x00000138 <...> NIP [d000000004700a40] qla2xxx_queuecommand+0x80/0x3f0 [qla2xxx] LR [d000000004700a10] qla2xxx_queuecommand+0x50/0x3f0 [qla2xxx] So, fail commands in qla2xxx_queuecommand() if the UNLOADING bit is set. Signed-off-by: Mauricio Faria de Oliveira Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 4d99c3b37687..e5db47443668 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -707,6 +707,11 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) srb_t *sp; int rval; + if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags))) { + cmd->result = DID_NO_CONNECT << 16; + goto qc24_fail_command; + } + if (ha->flags.eeh_busy) { if (ha->flags.pci_channel_io_perm_failure) { ql_dbg(ql_dbg_aer, vha, 0x9010, From 1535aa75a3d8320374f82d198e3900d5b0969d7e Mon Sep 17 00:00:00 2001 From: Mauricio Faria de Oliveira Date: Mon, 7 Nov 2016 17:53:31 -0200 Subject: [PATCH 160/224] scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove If a command is aborted in the kernel but not in the adapter, it might be considered complete and its DMA memory released, but it is still alive in the adapter, which will trigger an invalid DMA access upon its completion (in the DMA operations to deliver the command response to the driver). On powerpc platforms with IOMMU/EEH capabilities, the problem is observed during PCI device removal with ongoing IO requests -- which might trigger an EEH event very often, pointing to a 'TCE Request Page Access Error'. In that path, which is qla2x00_remove_one(), the commands are aborted in qla2x00_abort_all_cmds(), which does not perform an abort in the adapter as is done in qla2xxx_eh_abort() for example. So, this patch changes qla2x00_abort_all_cmds() to abort commands in the adapter too, with a call to qla2xxx_eh_abort(), which already implements all the logic to submit abort requests and handle responses. Reported-by: Naresh Bannoth Signed-off-by: Mauricio Faria de Oliveira Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e5db47443668..567fa080e261 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1456,6 +1456,15 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) { sp = req->outstanding_cmds[cnt]; if (sp) { + /* Get a reference to the sp and drop the lock. + * The reference ensures this sp->done() call + * - and not the call in qla2xxx_eh_abort() - + * ends the SCSI command (with result 'res'). + */ + sp_get(sp); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + qla2xxx_eh_abort(GET_CMD_SP(sp)); + spin_lock_irqsave(&ha->hardware_lock, flags); req->outstanding_cmds[cnt] = NULL; sp->done(vha, sp, res); } From 5ced937b7d8dae2c6a536112abaad6352769a931 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 8 Nov 2016 17:04:10 +0100 Subject: [PATCH 161/224] drm/imx: disable planes before DC If the DC clock is disabled before the attached IDMACs are properly stopped the IDMACs may hang the IPU or even the whole system. Make sure the IDMACs are in safe state by disabling the planes before removal of the DC clock. Also set the atomic parameter to false to stop calling the atomic_begin hook, which does nothing useful as we immediately afterwards turn off vblank interrupts and possibly send the pending vblank event. Fixes: 33f14235302f (drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpers) Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-crtc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c index 4e1ae3fc462d..6be515a9fb69 100644 --- a/drivers/gpu/drm/imx/ipuv3-crtc.c +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c @@ -68,6 +68,12 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc, ipu_dc_disable_channel(ipu_crtc->dc); ipu_di_disable(ipu_crtc->di); + /* + * Planes must be disabled before DC clock is removed, as otherwise the + * attached IDMACs will be left in undefined state, possibly hanging + * the IPU or even system. + */ + drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, false); ipu_dc_disable(ipu); spin_lock_irq(&crtc->dev->event_lock); @@ -77,9 +83,6 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc, } spin_unlock_irq(&crtc->dev->event_lock); - /* always disable planes on the CRTC */ - drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, true); - drm_crtc_vblank_off(crtc); } From 5e5ec1759dd663a1d5a2f10930224dd009e500e8 Mon Sep 17 00:00:00 2001 From: Sumit Saxena Date: Wed, 9 Nov 2016 02:59:42 -0800 Subject: [PATCH 162/224] scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression This patch will fix regression caused by commit 1e793f6fc0db ("scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices"). The problem was that the MEGASAS_IS_LOGICAL macro did not have braces and as a result the driver ended up exposing a lot of non-existing SCSI devices (all SCSI commands to channels 1,2,3 were returned as SUCCESS-DID_OK by driver). [mkp: clarified patch description] Fixes: 1e793f6fc0db920400574211c48f9157a37e3945 Reported-by: Jens Axboe CC: stable@vger.kernel.org Signed-off-by: Kashyap Desai Signed-off-by: Sumit Saxena Tested-by: Sumit Saxena Reviewed-by: Tomas Henzl Tested-by: Jens Axboe Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index ca86c885dfaa..3aaea713bf37 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -2233,7 +2233,7 @@ struct megasas_instance_template { }; #define MEGASAS_IS_LOGICAL(scp) \ - (scp->device->channel < MEGASAS_MAX_PD_CHANNELS) ? 0 : 1 + ((scp->device->channel < MEGASAS_MAX_PD_CHANNELS) ? 0 : 1) #define MEGASAS_DEV_INDEX(scp) \ (((scp->device->channel % 2) * MEGASAS_MAX_DEV_PER_CHANNEL) + \ From 1571875beecd5de9657f73931449bda1b1329b6f Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 3 Nov 2016 16:21:26 +0200 Subject: [PATCH 163/224] ACPI / platform: Add support for build-in properties MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We have a couple of drivers, acpi_apd.c and acpi_lpss.c, that need to pass extra build-in properties to the devices they create. Previously the drivers added those properties to the struct device which is member of the struct acpi_device, but that does not work. Those properties need to be assigned to the struct device of the platform device instead in order for them to become available to the drivers. To fix this, this patch changes acpi_create_platform_device function to take struct property_entry pointer as parameter. Fixes: 20a875e2e86e (serial: 8250_dw: Add quirk for APM X-Gene SoC) Signed-off-by: Heikki Krogerus Tested-by: Yazen Ghannam Tested-by: Jérôme de Bretagne Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_apd.c | 10 ++-------- drivers/acpi/acpi_lpss.c | 10 ++-------- drivers/acpi/acpi_platform.c | 5 ++++- drivers/acpi/dptf/int340x_thermal.c | 4 ++-- drivers/acpi/scan.c | 2 +- drivers/platform/x86/intel-hid.c | 2 +- drivers/platform/x86/intel-vbtn.c | 2 +- include/linux/acpi.h | 3 ++- 8 files changed, 15 insertions(+), 23 deletions(-) diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c index 5f112d811e42..5959ed996a75 100644 --- a/drivers/acpi/acpi_apd.c +++ b/drivers/acpi/acpi_apd.c @@ -117,7 +117,7 @@ static int acpi_apd_create_device(struct acpi_device *adev, int ret; if (!dev_desc) { - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, NULL); return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1; } @@ -134,14 +134,8 @@ static int acpi_apd_create_device(struct acpi_device *adev, goto err_out; } - if (dev_desc->properties) { - ret = device_add_properties(&adev->dev, dev_desc->properties); - if (ret) - goto err_out; - } - adev->driver_data = pdata; - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, dev_desc->properties); if (!IS_ERR_OR_NULL(pdev)) return 1; diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 552010288135..373657f7e35a 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -395,7 +395,7 @@ static int acpi_lpss_create_device(struct acpi_device *adev, dev_desc = (const struct lpss_device_desc *)id->driver_data; if (!dev_desc) { - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, NULL); return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1; } pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); @@ -451,14 +451,8 @@ static int acpi_lpss_create_device(struct acpi_device *adev, goto err_out; } - if (dev_desc->properties) { - ret = device_add_properties(&adev->dev, dev_desc->properties); - if (ret) - goto err_out; - } - adev->driver_data = pdata; - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, dev_desc->properties); if (!IS_ERR_OR_NULL(pdev)) { return 1; } diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c index 159f7f19abce..56e70da83c6c 100644 --- a/drivers/acpi/acpi_platform.c +++ b/drivers/acpi/acpi_platform.c @@ -33,6 +33,7 @@ static const struct acpi_device_id forbidden_id_list[] = { /** * acpi_create_platform_device - Create platform device for ACPI device node * @adev: ACPI device node to create a platform device for. + * @properties: Optional collection of build-in properties. * * Check if the given @adev can be represented as a platform device and, if * that's the case, create and register a platform device, populate its common @@ -40,7 +41,8 @@ static const struct acpi_device_id forbidden_id_list[] = { * * Name of the platform device will be the same as @adev's. */ -struct platform_device *acpi_create_platform_device(struct acpi_device *adev) +struct platform_device *acpi_create_platform_device(struct acpi_device *adev, + struct property_entry *properties) { struct platform_device *pdev = NULL; struct platform_device_info pdevinfo; @@ -88,6 +90,7 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *adev) pdevinfo.res = resources; pdevinfo.num_res = count; pdevinfo.fwnode = acpi_fwnode_handle(adev); + pdevinfo.properties = properties; if (acpi_dma_supported(adev)) pdevinfo.dma_mask = DMA_BIT_MASK(32); diff --git a/drivers/acpi/dptf/int340x_thermal.c b/drivers/acpi/dptf/int340x_thermal.c index 33505c651f62..86364097e236 100644 --- a/drivers/acpi/dptf/int340x_thermal.c +++ b/drivers/acpi/dptf/int340x_thermal.c @@ -34,11 +34,11 @@ static int int340x_thermal_handler_attach(struct acpi_device *adev, const struct acpi_device_id *id) { if (IS_ENABLED(CONFIG_INT340X_THERMAL)) - acpi_create_platform_device(adev); + acpi_create_platform_device(adev, NULL); /* Intel SoC DTS thermal driver needs INT3401 to set IRQ descriptor */ else if (IS_ENABLED(CONFIG_INTEL_SOC_DTS_THERMAL) && id->driver_data == INT3401_DEVICE) - acpi_create_platform_device(adev); + acpi_create_platform_device(adev, NULL); return 1; } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index ad9fc84a8601..3d31ae3a482d 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1734,7 +1734,7 @@ static void acpi_default_enumeration(struct acpi_device *device) &is_spi_i2c_slave); acpi_dev_free_resource_list(&resource_list); if (!is_spi_i2c_slave) { - acpi_create_platform_device(device); + acpi_create_platform_device(device, NULL); acpi_device_set_enumerated(device); } else { blocking_notifier_call_chain(&acpi_reconfig_chain, diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index ed5874217ee7..12dbb5063376 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -264,7 +264,7 @@ check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; if (acpi_match_device_ids(dev, ids) == 0) - if (acpi_create_platform_device(dev)) + if (acpi_create_platform_device(dev, NULL)) dev_info(&dev->dev, "intel-hid: created platform device\n"); diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c index 146d02f8c9bc..78080763df51 100644 --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel-vbtn.c @@ -164,7 +164,7 @@ check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; if (acpi_match_device_ids(dev, ids) == 0) - if (acpi_create_platform_device(dev)) + if (acpi_create_platform_device(dev, NULL)) dev_info(&dev->dev, "intel-vbtn: created platform device\n"); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 632ec16a855e..c09936f55166 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -546,7 +546,8 @@ int acpi_device_uevent_modalias(struct device *, struct kobj_uevent_env *); int acpi_device_modalias(struct device *, char *, int); void acpi_walk_dep_device_list(acpi_handle handle); -struct platform_device *acpi_create_platform_device(struct acpi_device *); +struct platform_device *acpi_create_platform_device(struct acpi_device *, + struct property_entry *); #define ACPI_PTR(_ptr) (_ptr) static inline void acpi_device_set_enumerated(struct acpi_device *adev) From d8e9e5e80e882b4f90cba7edf1e6cb7376e52e54 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Wed, 9 Nov 2016 22:52:58 +0100 Subject: [PATCH 164/224] drbd: Fix kernel_sendmsg() usage - potential NULL deref Don't pass a size larger than iov_len to kernel_sendmsg(). Otherwise it will cause a NULL pointer deref when kernel_sendmsg() returns with rv < size. DRBD as external module has been around in the kernel 2.4 days already. We used to be compatible to 2.4 and very early 2.6 kernels, we used to use rv = sock_sendmsg(sock, &msg, iov.iov_len); then later changed to rv = kernel_sendmsg(sock, &msg, &iov, 1, size); when we should have used rv = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); tcp_sendmsg() used to totally ignore the size parameter. 57be5bd ip: convert tcp_sendmsg() to iov_iter primitives changes that, and exposes our long standing error. Even with this error exposed, to trigger the bug, we would need to have an environment (config or otherwise) causing us to not use sendpage() for larger transfers, a failing connection, and have it fail "just at the right time". Apparently that was unlikely enough for most, so this went unnoticed for years. Still, it is known to trigger at least some of these, and suspected for the others: [0] http://lists.linbit.com/pipermail/drbd-user/2016-July/023112.html [1] http://lists.linbit.com/pipermail/drbd-dev/2016-March/003362.html [2] https://forums.grsecurity.net/viewtopic.php?f=3&t=4546 [3] https://ubuntuforums.org/showthread.php?t=2336150 [4] http://e2.howsolveproblem.com/i/1175162/ This should go into 4.9, and into all stable branches since and including v4.0, which is the first to contain the exposing change. It is correct for all stable branches older than that as well (which contain the DRBD driver; which is 2.6.33 and up). It requires a small "conflict" resolution for v4.4 and earlier, with v4.5 we dropped the comment block immediately preceding the kernel_sendmsg(). Fixes: b411b3637fa7 ("The DRBD driver") Cc: # 2.6.33.x- Cc: viro@zeniv.linux.org.uk Cc: christoph.lechleitner@iteg.at Cc: wolfgang.glas@iteg.at Reported-by: Christoph Lechleitner Tested-by: Christoph Lechleitner Signed-off-by: Richard Weinberger [changed oneliner to be "obvious" without context; more verbose message] Signed-off-by: Lars Ellenberg Signed-off-by: Jens Axboe --- drivers/block/drbd/drbd_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 100be556e613..83482721bc01 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -1871,7 +1871,7 @@ int drbd_send(struct drbd_connection *connection, struct socket *sock, drbd_update_congested(connection); } do { - rv = kernel_sendmsg(sock, &msg, &iov, 1, size); + rv = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); if (rv == -EAGAIN) { if (we_should_drop_the_connection(connection, sock)) break; From 18266403f3fe507f0246faa1d5432333a2f139ca Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 8 Nov 2016 13:10:57 +0100 Subject: [PATCH 165/224] USB: cdc-acm: fix TIOCMIWAIT The TIOCMIWAIT implementation would return -EINVAL if any of the three supported signals were included in the mask. Instead of returning an error in case TIOCM_CTS is included, simply drop the mask check completely, which is in accordance with how other drivers implement this ioctl. Fixes: 5a6a62bdb925 ("cdc-acm: add TIOCMIWAIT") Cc: stable Signed-off-by: Johan Hovold Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 4ad4ca44058b..fada988512a1 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -932,8 +932,6 @@ static int wait_serial_change(struct acm *acm, unsigned long arg) DECLARE_WAITQUEUE(wait, current); struct async_icount old, new; - if (arg & (TIOCM_DSR | TIOCM_RI | TIOCM_CD)) - return -EINVAL; do { spin_lock_irq(&acm->read_lock); old = acm->oldcount; From b13d14339baaaa720e7e5448855f33ba501917aa Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Sun, 30 Oct 2016 23:19:24 +0100 Subject: [PATCH 166/224] ppdev: fix double-free of pp->pdev->name free_pardevice() is called by parport_unregister_device() and already frees pp->pdev->name, don't try to do it again. This bug causes kernel crashes. I found and verified this with KASAN and some added pr_emerg()s: [ 60.316568] pp_release: pp->pdev->name == ffff88039cb264c0 [ 60.316692] free_pardevice: freeing par_dev->name at ffff88039cb264c0 [ 60.316706] pp_release: kfree(ffff88039cb264c0) [ 60.316714] ========================================================== [ 60.316722] BUG: Double free or freeing an invalid pointer [ 60.316731] Unexpected shadow byte: 0xFB [ 60.316801] Object at ffff88039cb264c0, in cache kmalloc-32 size: 32 [ 60.316813] Allocated: [ 60.316824] PID = 1695 [ 60.316869] Freed: [ 60.316880] PID = 1695 [ 60.316935] ========================================================== Signed-off-by: Jann Horn Acked-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/char/ppdev.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c index d23368874710..6af1ce04b3da 100644 --- a/drivers/char/ppdev.c +++ b/drivers/char/ppdev.c @@ -748,10 +748,7 @@ static int pp_release(struct inode *inode, struct file *file) } if (pp->pdev) { - const char *name = pp->pdev->name; - parport_unregister_device(pp->pdev); - kfree(name); pp->pdev = NULL; pr_debug(CHRDEV "%x: unregistered pardevice\n", minor); } From 62bdf94a2049822ef8c6d4b0e83cd9c3a1663ab4 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 Nov 2016 16:16:24 -0500 Subject: [PATCH 167/224] xprtrdma: Fix DMAR failure in frwr_op_map() after reconnect When a LOCALINV WR is flushed, the frmr is marked STALE, then frwr_op_unmap_sync DMA-unmaps the frmr's SGL. These STALE frmrs are then recovered when frwr_op_map hunts for an INVALID frmr to use. All other cases that need frmr recovery leave that SGL DMA-mapped. The FRMR recovery path unconditionally DMA-unmaps the frmr's SGL. To avoid DMA unmapping the SGL twice for flushed LOCAL_INV WRs, alter the recovery logic (rather than the hot frwr_op_unmap_sync path) to distinguish among these cases. This solution also takes care of the case where multiple LOCAL_INV WRs are issued for the same rpcrdma_req, some complete successfully, but some are flushed. Reported-by: Vasco Steinmetz Signed-off-by: Chuck Lever Tested-by: Vasco Steinmetz Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/frwr_ops.c | 37 ++++++++++++++++++++------------- net/sunrpc/xprtrdma/xprt_rdma.h | 3 ++- 2 files changed, 24 insertions(+), 16 deletions(-) diff --git a/net/sunrpc/xprtrdma/frwr_ops.c b/net/sunrpc/xprtrdma/frwr_ops.c index 210949562786..26b26beef2d4 100644 --- a/net/sunrpc/xprtrdma/frwr_ops.c +++ b/net/sunrpc/xprtrdma/frwr_ops.c @@ -44,18 +44,20 @@ * being done. * * When the underlying transport disconnects, MRs are left in one of - * three states: + * four states: * * INVALID: The MR was not in use before the QP entered ERROR state. - * (Or, the LOCAL_INV WR has not completed or flushed yet). - * - * STALE: The MR was being registered or unregistered when the QP - * entered ERROR state, and the pending WR was flushed. * * VALID: The MR was registered before the QP entered ERROR state. * - * When frwr_op_map encounters STALE and VALID MRs, they are recovered - * with ib_dereg_mr and then are re-initialized. Beause MR recovery + * FLUSHED_FR: The MR was being registered when the QP entered ERROR + * state, and the pending WR was flushed. + * + * FLUSHED_LI: The MR was being invalidated when the QP entered ERROR + * state, and the pending WR was flushed. + * + * When frwr_op_map encounters FLUSHED and VALID MRs, they are recovered + * with ib_dereg_mr and then are re-initialized. Because MR recovery * allocates fresh resources, it is deferred to a workqueue, and the * recovered MRs are placed back on the rb_mws list when recovery is * complete. frwr_op_map allocates another MR for the current RPC while @@ -177,12 +179,15 @@ __frwr_reset_mr(struct rpcrdma_ia *ia, struct rpcrdma_mw *r) static void frwr_op_recover_mr(struct rpcrdma_mw *mw) { + enum rpcrdma_frmr_state state = mw->frmr.fr_state; struct rpcrdma_xprt *r_xprt = mw->mw_xprt; struct rpcrdma_ia *ia = &r_xprt->rx_ia; int rc; rc = __frwr_reset_mr(ia, mw); - ib_dma_unmap_sg(ia->ri_device, mw->mw_sg, mw->mw_nents, mw->mw_dir); + if (state != FRMR_FLUSHED_LI) + ib_dma_unmap_sg(ia->ri_device, + mw->mw_sg, mw->mw_nents, mw->mw_dir); if (rc) goto out_release; @@ -262,10 +267,8 @@ frwr_op_maxpages(struct rpcrdma_xprt *r_xprt) } static void -__frwr_sendcompletion_flush(struct ib_wc *wc, struct rpcrdma_frmr *frmr, - const char *wr) +__frwr_sendcompletion_flush(struct ib_wc *wc, const char *wr) { - frmr->fr_state = FRMR_IS_STALE; if (wc->status != IB_WC_WR_FLUSH_ERR) pr_err("rpcrdma: %s: %s (%u/0x%x)\n", wr, ib_wc_status_msg(wc->status), @@ -288,7 +291,8 @@ frwr_wc_fastreg(struct ib_cq *cq, struct ib_wc *wc) if (wc->status != IB_WC_SUCCESS) { cqe = wc->wr_cqe; frmr = container_of(cqe, struct rpcrdma_frmr, fr_cqe); - __frwr_sendcompletion_flush(wc, frmr, "fastreg"); + frmr->fr_state = FRMR_FLUSHED_FR; + __frwr_sendcompletion_flush(wc, "fastreg"); } } @@ -308,7 +312,8 @@ frwr_wc_localinv(struct ib_cq *cq, struct ib_wc *wc) if (wc->status != IB_WC_SUCCESS) { cqe = wc->wr_cqe; frmr = container_of(cqe, struct rpcrdma_frmr, fr_cqe); - __frwr_sendcompletion_flush(wc, frmr, "localinv"); + frmr->fr_state = FRMR_FLUSHED_LI; + __frwr_sendcompletion_flush(wc, "localinv"); } } @@ -328,8 +333,10 @@ frwr_wc_localinv_wake(struct ib_cq *cq, struct ib_wc *wc) /* WARNING: Only wr_cqe and status are reliable at this point */ cqe = wc->wr_cqe; frmr = container_of(cqe, struct rpcrdma_frmr, fr_cqe); - if (wc->status != IB_WC_SUCCESS) - __frwr_sendcompletion_flush(wc, frmr, "localinv"); + if (wc->status != IB_WC_SUCCESS) { + frmr->fr_state = FRMR_FLUSHED_LI; + __frwr_sendcompletion_flush(wc, "localinv"); + } complete(&frmr->fr_linv_done); } diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h index 0d35b761c883..6e1bba358203 100644 --- a/net/sunrpc/xprtrdma/xprt_rdma.h +++ b/net/sunrpc/xprtrdma/xprt_rdma.h @@ -216,7 +216,8 @@ struct rpcrdma_rep { enum rpcrdma_frmr_state { FRMR_IS_INVALID, /* ready to be used */ FRMR_IS_VALID, /* in use */ - FRMR_IS_STALE, /* failed completion */ + FRMR_FLUSHED_FR, /* flushed FASTREG WR */ + FRMR_FLUSHED_LI, /* flushed LOCALINV WR */ }; struct rpcrdma_frmr { From 0a866d38ef3c13cf5834b78df21ee4c39bb5a689 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 18:01:01 -0500 Subject: [PATCH 168/224] drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk Missing for one case. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 2ba7937d2545..520665e1ef12 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -711,7 +711,7 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, int ret = 0; if (hwmgr->chip_id < CHIP_POLARIS10) { - atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); + ret = atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); if (*voltage >= 2000 || *voltage == 0) *voltage = 1150; } else { From 90ebf11857c2743fab1b2b64140aff24e256e758 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 18:04:54 -0500 Subject: [PATCH 169/224] drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland Was missing the handling for iceland. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 520665e1ef12..e03dcb6ea9c1 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -710,7 +710,9 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, uint32_t vol; int ret = 0; - if (hwmgr->chip_id < CHIP_POLARIS10) { + if (hwmgr->chip_id < CHIP_TONGA) { + ret = atomctrl_get_voltage_evv(hwmgr, id, voltage); + } else if (hwmgr->chip_id < CHIP_POLARIS10) { ret = atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); if (*voltage >= 2000 || *voltage == 0) *voltage = 1150; From 0f12f73c5175d39445fa10cdca4481f80efdef49 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 17:52:42 -0500 Subject: [PATCH 170/224] drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2) Only check if the tables exist in relevant configs. This fixes a failure on V0 tables. v2: fix version check as suggested by Rex bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 51fb86f20c21..f41cddf2a16b 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1460,19 +1460,19 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) struct phm_ppt_v1_clock_voltage_dependency_table *sclk_table = NULL; - if (table_info == NULL) - return -EINVAL; - - sclk_table = table_info->vdd_dep_on_sclk; - for (i = 0; i < SMU7_MAX_LEAKAGE_COUNT; i++) { vv_id = ATOM_VIRTUAL_VOLTAGE_ID0 + i; if (data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2) { - if (0 == phm_get_sclk_for_voltage_evv(hwmgr, + if ((hwmgr->pp_table_version == PP_TABLE_V1) + && !phm_get_sclk_for_voltage_evv(hwmgr, table_info->vddgfx_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { + if (table_info == NULL) + return -EINVAL; + sclk_table = table_info->vdd_dep_on_sclk; + for (j = 1; j < sclk_table->count; j++) { if (sclk_table->entries[j].clk == sclk && sclk_table->entries[j].cks_enable == 0) { @@ -1498,12 +1498,15 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) } } } else { - if ((hwmgr->pp_table_version == PP_TABLE_V0) || !phm_get_sclk_for_voltage_evv(hwmgr, table_info->vddc_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { + if (table_info == NULL) + return -EINVAL; + sclk_table = table_info->vdd_dep_on_sclk; + for (j = 1; j < sclk_table->count; j++) { if (sclk_table->entries[j].clk == sclk && sclk_table->entries[j].cks_enable == 0) { From 31a3a7b5b26f75fbe82de10ca99f2b673f6c26b4 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Thu, 10 Nov 2016 11:14:37 -0600 Subject: [PATCH 171/224] PCI: rockchip: Add three new resets as required properties pm_rst, aclk_rst, pclk_rst was controlled by ROM code so the software wasn't needed to control it again in theory. But it didn't work properly, so we do need to do it again and add enough delay between the assert of pm_rst and the deassert of pm_rst. The Soc intergrated with this controller, rk3399, is still under MP test internally, so the backward compatibility won't be a big deal. Signed-off-by: Shawn Lin Signed-off-by: Bjorn Helgaas Reviewed-by: Heiko Stuebner Acked-by: Rob Herring --- .../devicetree/bindings/pci/rockchip-pcie.txt | 11 +++- drivers/pci/host/pcie-rockchip.c | 62 +++++++++++++++++++ 2 files changed, 70 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt index ba67b39939c1..71aeda1ca055 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt @@ -26,13 +26,16 @@ Required properties: - "sys" - "legacy" - "client" -- resets: Must contain five entries for each entry in reset-names. +- resets: Must contain seven entries for each entry in reset-names. See ../reset/reset.txt for details. - reset-names: Must include the following names - "core" - "mgmt" - "mgmt-sticky" - "pipe" + - "pm" + - "aclk" + - "pclk" - pinctrl-names : The pin control state names - pinctrl-0: The "default" pinctrl state - #interrupt-cells: specifies the number of cells needed to encode an @@ -86,8 +89,10 @@ pcie0: pcie@f8000000 { reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>; reg-names = "axi-base", "apb-base"; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; phys = <&pcie_phy>; phy-names = "pcie-phy"; pinctrl-names = "default"; diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c index e0b22dab9b7a..e04f69beb42d 100644 --- a/drivers/pci/host/pcie-rockchip.c +++ b/drivers/pci/host/pcie-rockchip.c @@ -190,6 +190,9 @@ struct rockchip_pcie { struct reset_control *mgmt_rst; struct reset_control *mgmt_sticky_rst; struct reset_control *pipe_rst; + struct reset_control *pm_rst; + struct reset_control *aclk_rst; + struct reset_control *pclk_rst; struct clk *aclk_pcie; struct clk *aclk_perf_pcie; struct clk *hclk_pcie; @@ -408,6 +411,44 @@ static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip) gpiod_set_value(rockchip->ep_gpio, 0); + err = reset_control_assert(rockchip->aclk_rst); + if (err) { + dev_err(dev, "assert aclk_rst err %d\n", err); + return err; + } + + err = reset_control_assert(rockchip->pclk_rst); + if (err) { + dev_err(dev, "assert pclk_rst err %d\n", err); + return err; + } + + err = reset_control_assert(rockchip->pm_rst); + if (err) { + dev_err(dev, "assert pm_rst err %d\n", err); + return err; + } + + udelay(10); + + err = reset_control_deassert(rockchip->pm_rst); + if (err) { + dev_err(dev, "deassert pm_rst err %d\n", err); + return err; + } + + err = reset_control_deassert(rockchip->aclk_rst); + if (err) { + dev_err(dev, "deassert mgmt_sticky_rst err %d\n", err); + return err; + } + + err = reset_control_deassert(rockchip->pclk_rst); + if (err) { + dev_err(dev, "deassert mgmt_sticky_rst err %d\n", err); + return err; + } + err = phy_init(rockchip->phy); if (err < 0) { dev_err(dev, "fail to init phy, err %d\n", err); @@ -781,6 +822,27 @@ static int rockchip_pcie_parse_dt(struct rockchip_pcie *rockchip) return PTR_ERR(rockchip->pipe_rst); } + rockchip->pm_rst = devm_reset_control_get(dev, "pm"); + if (IS_ERR(rockchip->pm_rst)) { + if (PTR_ERR(rockchip->pm_rst) != -EPROBE_DEFER) + dev_err(dev, "missing pm reset property in node\n"); + return PTR_ERR(rockchip->pm_rst); + } + + rockchip->pclk_rst = devm_reset_control_get(dev, "pclk"); + if (IS_ERR(rockchip->pclk_rst)) { + if (PTR_ERR(rockchip->pclk_rst) != -EPROBE_DEFER) + dev_err(dev, "missing pclk reset property in node\n"); + return PTR_ERR(rockchip->pclk_rst); + } + + rockchip->aclk_rst = devm_reset_control_get(dev, "aclk"); + if (IS_ERR(rockchip->aclk_rst)) { + if (PTR_ERR(rockchip->aclk_rst) != -EPROBE_DEFER) + dev_err(dev, "missing aclk reset property in node\n"); + return PTR_ERR(rockchip->aclk_rst); + } + rockchip->ep_gpio = devm_gpiod_get(dev, "ep", GPIOD_OUT_HIGH); if (IS_ERR(rockchip->ep_gpio)) { dev_err(dev, "missing ep-gpios property in node\n"); From 4d3222f7071c01104b43300f1c10b55723df8f68 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Thu, 10 Nov 2016 11:14:46 -0600 Subject: [PATCH 172/224] arm64: dts: rockchip: add three new resets for rk3399 PCIe controller pm_rst, aclk_rst and pclk_rst should be controlled by driver, so we need to add these three resets for PCIe controller. Signed-off-by: Shawn Lin Signed-off-by: Bjorn Helgaas Acked-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index b65c193dc64e..7afbfb0f96a3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -300,8 +300,11 @@ pcie0: pcie@f8000000 { ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, + <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; status = "disabled"; pcie0_intc: interrupt-controller { From 954e6bee03fea509a85aea4cbf45307fe4e3b43e Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 10 Nov 2016 14:07:34 +0800 Subject: [PATCH 173/224] drm/amd/powerplay: implement get_clock_by_type for iceland. iceland use pptable v0. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Alex Deucher Signed-off-by: Rex Zhu Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 51 ++++++++++++------- 1 file changed, 33 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index f41cddf2a16b..b0c929dd8beb 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -4233,18 +4233,26 @@ static int smu7_get_sclks(struct pp_hwmgr *hwmgr, struct amd_pp_clocks *clocks) { struct phm_ppt_v1_information *table_info = (struct phm_ppt_v1_information *)hwmgr->pptable; - struct phm_ppt_v1_clock_voltage_dependency_table *dep_sclk_table; + struct phm_ppt_v1_clock_voltage_dependency_table *dep_sclk_table = NULL; + struct phm_clock_voltage_dependency_table *sclk_table; int i; - if (table_info == NULL) - return -EINVAL; - - dep_sclk_table = table_info->vdd_dep_on_sclk; - - for (i = 0; i < dep_sclk_table->count; i++) { - clocks->clock[i] = dep_sclk_table->entries[i].clk; - clocks->count++; + if (hwmgr->pp_table_version == PP_TABLE_V1) { + if (table_info == NULL || table_info->vdd_dep_on_sclk == NULL) + return -EINVAL; + dep_sclk_table = table_info->vdd_dep_on_sclk; + for (i = 0; i < dep_sclk_table->count; i++) { + clocks->clock[i] = dep_sclk_table->entries[i].clk; + clocks->count++; + } + } else if (hwmgr->pp_table_version == PP_TABLE_V0) { + sclk_table = hwmgr->dyn_state.vddc_dependency_on_sclk; + for (i = 0; i < sclk_table->count; i++) { + clocks->clock[i] = sclk_table->entries[i].clk; + clocks->count++; + } } + return 0; } @@ -4266,17 +4274,24 @@ static int smu7_get_mclks(struct pp_hwmgr *hwmgr, struct amd_pp_clocks *clocks) (struct phm_ppt_v1_information *)hwmgr->pptable; struct phm_ppt_v1_clock_voltage_dependency_table *dep_mclk_table; int i; + struct phm_clock_voltage_dependency_table *mclk_table; - if (table_info == NULL) - return -EINVAL; - - dep_mclk_table = table_info->vdd_dep_on_mclk; - - for (i = 0; i < dep_mclk_table->count; i++) { - clocks->clock[i] = dep_mclk_table->entries[i].clk; - clocks->latency[i] = smu7_get_mem_latency(hwmgr, + if (hwmgr->pp_table_version == PP_TABLE_V1) { + if (table_info == NULL) + return -EINVAL; + dep_mclk_table = table_info->vdd_dep_on_mclk; + for (i = 0; i < dep_mclk_table->count; i++) { + clocks->clock[i] = dep_mclk_table->entries[i].clk; + clocks->latency[i] = smu7_get_mem_latency(hwmgr, dep_mclk_table->entries[i].clk); - clocks->count++; + clocks->count++; + } + } else if (hwmgr->pp_table_version == PP_TABLE_V0) { + mclk_table = hwmgr->dyn_state.vddc_dependency_on_mclk; + for (i = 0; i < mclk_table->count; i++) { + clocks->clock[i] = mclk_table->entries[i].clk; + clocks->count++; + } } return 0; } From 8a8d56176635515d607c520580c73d61f300b409 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Wed, 9 Nov 2016 16:47:54 +0800 Subject: [PATCH 174/224] ceph: use default file splice read callback Splice read/write implementation changed recently. When using generic_file_splice_read(), iov_iter with type == ITER_PIPE is passed to filesystem's read_iter callback. But ceph_sync_read() can't serve ITER_PIPE iov_iter correctly (ITER_PIPE iov_iter expects pages from page cache). Fixing ceph_sync_read() requires a big patch. So use default splice read callback for now. Signed-off-by: Yan, Zheng Signed-off-by: Ilya Dryomov --- fs/ceph/file.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ceph/file.c b/fs/ceph/file.c index 18630e800208..f995e3528a33 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -1770,7 +1770,6 @@ const struct file_operations ceph_file_fops = { .fsync = ceph_fsync, .lock = ceph_lock, .flock = ceph_flock, - .splice_read = generic_file_splice_read, .splice_write = iter_file_splice_write, .unlocked_ioctl = ceph_ioctl, .compat_ioctl = ceph_ioctl, From 3890dce1d3a8b9fe3bc36de99496792e468cd079 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Wed, 9 Nov 2016 16:42:48 +0800 Subject: [PATCH 175/224] libceph: fix legacy layout decode with pool 0 If your data pool was pool 0, ceph_file_layout_from_legacy() transform that to -1 unconditionally, which broke upgrades. We only want do that for a fully zeroed ceph_file_layout, so that it still maps to a file_layout_t. If any fields are set, though, we trust the fl_pgpool to be a valid pool. Fixes: 7627151ea30bc ("libceph: define new ceph_file_layout structure") Link: http://tracker.ceph.com/issues/17825 Signed-off-by: Yan, Zheng Signed-off-by: Ilya Dryomov --- net/ceph/ceph_fs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ceph/ceph_fs.c b/net/ceph/ceph_fs.c index 7d54e944de5e..dcbe67ff3e2b 100644 --- a/net/ceph/ceph_fs.c +++ b/net/ceph/ceph_fs.c @@ -34,7 +34,8 @@ void ceph_file_layout_from_legacy(struct ceph_file_layout *fl, fl->stripe_count = le32_to_cpu(legacy->fl_stripe_count); fl->object_size = le32_to_cpu(legacy->fl_object_size); fl->pool_id = le32_to_cpu(legacy->fl_pg_pool); - if (fl->pool_id == 0) + if (fl->pool_id == 0 && fl->stripe_unit == 0 && + fl->stripe_count == 0 && fl->object_size == 0) fl->pool_id = -1; } EXPORT_SYMBOL(ceph_file_layout_from_legacy); From 264048afab27d7c27eedf5394714e0b396d787f7 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 8 Nov 2016 15:15:24 +0100 Subject: [PATCH 176/224] libceph: initialize last_linger_id with a large integer osdc->last_linger_id is a counter for lreq->linger_id, which is used for watch cookies. Starting with a large integer should ease the task of telling apart kernel and userspace clients. Signed-off-by: Ilya Dryomov --- include/linux/ceph/osd_client.h | 2 ++ net/ceph/osd_client.c | 1 + 2 files changed, 3 insertions(+) diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index 96337b15a60d..a8e66344bacc 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -258,6 +258,8 @@ struct ceph_watch_item { struct ceph_entity_addr addr; }; +#define CEPH_LINGER_ID_START 0xffff000000000000ULL + struct ceph_osd_client { struct ceph_client *client; diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index d9bf7a1d0a58..e6ae15bc41b7 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -4094,6 +4094,7 @@ int ceph_osdc_init(struct ceph_osd_client *osdc, struct ceph_client *client) osd_init(&osdc->homeless_osd); osdc->homeless_osd.o_osdc = osdc; osdc->homeless_osd.o_osd = CEPH_HOMELESS_OSD; + osdc->last_linger_id = CEPH_LINGER_ID_START; osdc->linger_requests = RB_ROOT; osdc->map_checks = RB_ROOT; osdc->linger_map_checks = RB_ROOT; From bc79c9851a76d76f269d9ef5150e180825650b67 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Thu, 10 Nov 2016 16:10:44 -0500 Subject: [PATCH 177/224] PCI: VMD: Update filename to reflect move Updating MAINTAINERS to reflect the new location of the VMD driver. Signed-off-by: Keith Busch Signed-off-by: Bjorn Helgaas --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 906e96948520..aefa6bf1782e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9318,7 +9318,7 @@ PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD) M: Keith Busch L: linux-pci@vger.kernel.org S: Supported -F: arch/x86/pci/vmd.c +F: drivers/pci/host/vmd.c PCIE DRIVER FOR ST SPEAR13XX M: Pratyush Anand From e5581fe2b4f40e54bfea9a1eee1bc487da52e98c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 8 Nov 2016 16:38:00 +1000 Subject: [PATCH 178/224] drm/udl: make control msg static const. (v2) Thou shall not send control msg from the stack, does that mean I can send it from the RO memory area? and it looks like the answer is no, so here's v2 which kmemdups. Reported-by: poma Tested-by: poma Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_main.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c index 29f0207fa677..873f010d9616 100644 --- a/drivers/gpu/drm/udl/udl_main.c +++ b/drivers/gpu/drm/udl/udl_main.c @@ -98,17 +98,23 @@ static int udl_parse_vendor_descriptor(struct drm_device *dev, static int udl_select_std_channel(struct udl_device *udl) { int ret; - u8 set_def_chn[] = {0x57, 0xCD, 0xDC, 0xA7, - 0x1C, 0x88, 0x5E, 0x15, - 0x60, 0xFE, 0xC6, 0x97, - 0x16, 0x3D, 0x47, 0xF2}; + static const u8 set_def_chn[] = {0x57, 0xCD, 0xDC, 0xA7, + 0x1C, 0x88, 0x5E, 0x15, + 0x60, 0xFE, 0xC6, 0x97, + 0x16, 0x3D, 0x47, 0xF2}; + void *sendbuf; + + sendbuf = kmemdup(set_def_chn, sizeof(set_def_chn), GFP_KERNEL); + if (!sendbuf) + return -ENOMEM; ret = usb_control_msg(udl->udev, usb_sndctrlpipe(udl->udev, 0), NR_USB_REQUEST_CHANNEL, (USB_DIR_OUT | USB_TYPE_VENDOR), 0, 0, - set_def_chn, sizeof(set_def_chn), + sendbuf, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT); + kfree(sendbuf); return ret < 0 ? ret : 0; } From e519e7774784f3fa7728657d780863805ed1c983 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 10 Nov 2016 18:32:13 -0500 Subject: [PATCH 179/224] splice: remove detritus from generic_file_splice_read() i_size check is a leftover from the horrors that used to play with the page cache in that function. With the switch to ->read_iter(), it's neither needed nor correct - for gfs2 it ends up being buggy, since i_size is not guaranteed to be correct until later (inside ->read_iter()). Spotted-by: Abhi Das Signed-off-by: Al Viro --- fs/splice.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/splice.c b/fs/splice.c index 153d4f3bd441..dcaf185a5731 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -299,13 +299,8 @@ ssize_t generic_file_splice_read(struct file *in, loff_t *ppos, { struct iov_iter to; struct kiocb kiocb; - loff_t isize; int idx, ret; - isize = i_size_read(in->f_mapping->host); - if (unlikely(*ppos >= isize)) - return 0; - iov_iter_pipe(&to, ITER_PIPE | READ, pipe, len); idx = to.idx; init_sync_kiocb(&kiocb, in); From 6f75c3fd56daf547d684127a7f83c283c3c160d1 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 9 Nov 2016 17:21:08 -0800 Subject: [PATCH 180/224] PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails Consider two devices, A and B, where B is a child of A, and B utilizes asynchronous suspend (it does not matter whether A is sync or async). If B fails to suspend_noirq() or suspend_late(), or is interrupted by a wakeup (pm_wakeup_pending()), then it aborts and sets the async_error variable. However, device A does not (immediately) check the async_error variable; it may continue to run its own suspend_noirq()/suspend_late() callback. This is bad. We can resolve this problem by doing our error and wakeup checking (particularly, for the async_error flag) after waiting for children to suspend, instead of before. This also helps align the logic for the noirq and late suspend cases with the logic in __device_suspend(). It's easy to observe this erroneous behavior by, for example, forcing a device to sleep a bit in its suspend_noirq() (to ensure the parent is waiting for the child to complete), then return an error, and watch the parent suspend_noirq() still get called. (Or similarly, fake a wakeup event at the right (or is it wrong?) time.) Fixes: de377b397272 (PM / sleep: Asynchronous threads for suspend_late) Fixes: 28b6fd6e3779 (PM / sleep: Asynchronous threads for suspend_noirq) Reported-by: Jeffy Chen Signed-off-by: Brian Norris Signed-off-by: Rafael J. Wysocki --- drivers/base/power/main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index e44944f4be77..2932a5bd892f 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -1027,6 +1027,8 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a TRACE_DEVICE(dev); TRACE_SUSPEND(0); + dpm_wait_for_children(dev, async); + if (async_error) goto Complete; @@ -1038,8 +1040,6 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a if (dev->power.syscore || dev->power.direct_complete) goto Complete; - dpm_wait_for_children(dev, async); - if (dev->pm_domain) { info = "noirq power domain "; callback = pm_noirq_op(&dev->pm_domain->ops, state); @@ -1174,6 +1174,8 @@ static int __device_suspend_late(struct device *dev, pm_message_t state, bool as __pm_runtime_disable(dev, false); + dpm_wait_for_children(dev, async); + if (async_error) goto Complete; @@ -1185,8 +1187,6 @@ static int __device_suspend_late(struct device *dev, pm_message_t state, bool as if (dev->power.syscore || dev->power.direct_complete) goto Complete; - dpm_wait_for_children(dev, async); - if (dev->pm_domain) { info = "late power domain "; callback = pm_late_early_op(&dev->pm_domain->ops, state); From 9e80c719a82be2399bb06eab6cd27cb97aa59742 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 10 Nov 2016 10:46:04 -0800 Subject: [PATCH 181/224] mm: remove extra newline from allocation stall warning Commit 63f53dea0c98 ("mm: warn about allocations which stall for too long") by error embedded "\n" in the format string, resulting in strange output. [ 722.876655] kworker/0:1: page alloction stalls for 160001ms, order:0 [ 722.876656] , mode:0x2400000(GFP_NOIO) [ 722.876657] CPU: 0 PID: 6966 Comm: kworker/0:1 Not tainted 4.8.0+ #69 Link: http://lkml.kernel.org/r/1476026219-7974-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 072d791dce2d..6de9440e3ae2 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3658,7 +3658,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, /* Make sure we know about allocations which stall for too long */ if (time_after(jiffies, alloc_start + stall_timeout)) { warn_alloc(gfp_mask, - "page alloction stalls for %ums, order:%u\n", + "page allocation stalls for %ums, order:%u", jiffies_to_msecs(jiffies-alloc_start), order); stall_timeout += 10 * HZ; } From 5e322beefc8699b5747cfb35539a9496034e4296 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Thu, 10 Nov 2016 10:46:07 -0800 Subject: [PATCH 182/224] mm, frontswap: make sure allocated frontswap map is assigned Christian Borntraeger reports: With commit 8ea1d2a1985a ("mm, frontswap: convert frontswap_enabled to static key") kmemleak complains about a memory leak in swapon unreferenced object 0x3e09ba56000 (size 32112640): comm "swapon", pid 7852, jiffies 4294968787 (age 1490.770s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: __vmalloc_node_range+0x194/0x2d8 vzalloc+0x58/0x68 SyS_swapon+0xd60/0x12f8 system_call+0xd6/0x270 Turns out kmemleak is right. We now allocate the frontswap map depending on the kernel config (and no longer on the enablement) swapfile.c: [...] if (IS_ENABLED(CONFIG_FRONTSWAP)) frontswap_map = vzalloc(BITS_TO_LONGS(maxpages) * sizeof(long)); but later on this is passed along --> enable_swap_info(p, prio, swap_map, cluster_info, frontswap_map); and ignored if frontswap is disabled --> frontswap_init(p->type, frontswap_map); static inline void frontswap_init(unsigned type, unsigned long *map) { if (frontswap_enabled()) __frontswap_init(type, map); } Thing is, that frontswap map is never freed. The leakage is relatively not that bad, because swapon is an infrequent and privileged operation. However, if the first frontswap backend is registered after a swap type has been already enabled, it will WARN_ON in frontswap_register_ops() and frontswap will not be available for the swap type. Fix this by making sure the map is assigned by frontswap_init() as long as CONFIG_FRONTSWAP is enabled. Fixes: 8ea1d2a1985a ("mm, frontswap: convert frontswap_enabled to static key") Link: http://lkml.kernel.org/r/20161026134220.2566-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka Reported-by: Christian Borntraeger Cc: Konrad Rzeszutek Wilk Cc: Boris Ostrovsky Cc: David Vrabel Cc: Juergen Gross Cc: "Kirill A. Shutemov" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/frontswap.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/frontswap.h b/include/linux/frontswap.h index c46d2aa16d81..1d18af034554 100644 --- a/include/linux/frontswap.h +++ b/include/linux/frontswap.h @@ -106,8 +106,9 @@ static inline void frontswap_invalidate_area(unsigned type) static inline void frontswap_init(unsigned type, unsigned long *map) { - if (frontswap_enabled()) - __frontswap_init(type, map); +#ifdef CONFIG_FRONTSWAP + __frontswap_init(type, map); +#endif } #endif /* _LINUX_FRONTSWAP_H */ From 9956edf37e65e93fbb76dcff1236dff2323d306a Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 10 Nov 2016 10:46:11 -0800 Subject: [PATCH 183/224] shmem: fix pageflags after swapping DMA32 object If shmem_alloc_page() does not set PageLocked and PageSwapBacked, then shmem_replace_page() needs to do so for itself. Without this, it puts newpage on the wrong lru, re-unlocks the unlocked newpage, and system descends into "Bad page" reports and freeze; or if CONFIG_DEBUG_VM=y, it hits an earlier VM_BUG_ON_PAGE(!PageLocked), depending on config. But shmem_replace_page() is not a common path: it's only called when swapin (or swapoff) finds the page was already read into an unsuitable zone: usually all zones are suitable, but gem objects for a few drm devices (gma500, omapdrm, crestline, broadwater) require zone DMA32 if there's more than 4GB of ram. Fixes: 800d8c63b2e9 ("shmem: add huge pages support") Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1611062003510.11253@eggly.anvils Signed-off-by: Hugh Dickins Acked-by: Kirill A. Shutemov Cc: [4.8.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/shmem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/shmem.c b/mm/shmem.c index ad7813d73ea7..166ebf5d2bce 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1483,6 +1483,8 @@ static int shmem_replace_page(struct page **pagep, gfp_t gfp, copy_highpage(newpage, oldpage); flush_dcache_page(newpage); + __SetPageLocked(newpage); + __SetPageSwapBacked(newpage); SetPageUptodate(newpage); set_page_private(newpage, swap_index); SetPageSwapCache(newpage); From eef06b82f16c78dc0197e3e9d5b2230647a890ff Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 10 Nov 2016 10:46:13 -0800 Subject: [PATCH 184/224] scripts/bloat-o-meter: fix SIGPIPE Fix piping output to a program which quickly exits (read: head -n1) $ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux | head -n1 add/remove: 0/0 grow/shrink: 9/60 up/down: 124/-305 (-181) close failed in file object destructor: sys.excepthook is missing lost sys.stderr Link: http://lkml.kernel.org/r/20161028204618.GA29923@avx2 Signed-off-by: Alexey Dobriyan Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/bloat-o-meter | 3 +++ 1 file changed, 3 insertions(+) diff --git a/scripts/bloat-o-meter b/scripts/bloat-o-meter index 19f5adfd877d..d9ff038c1b28 100755 --- a/scripts/bloat-o-meter +++ b/scripts/bloat-o-meter @@ -8,6 +8,9 @@ # of the GNU General Public License, incorporated herein by reference. import sys, os, re +from signal import signal, SIGPIPE, SIG_DFL + +signal(SIGPIPE, SIG_DFL) if len(sys.argv) != 3: sys.stderr.write("usage: %s file1 file2\n" % sys.argv[0]) From 6b36ba599d602d8a73920fb5c470fe272fac49c1 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Thu, 10 Nov 2016 10:46:16 -0800 Subject: [PATCH 185/224] mm/cma.c: check the max limit for cma allocation CMA allocation request size is represented by size_t that gets truncated when same is passed as int to bitmap_find_next_zero_area_off. We observe that during fuzz testing when cma allocation request is too high, bitmap_find_next_zero_area_off still returns success due to the truncation. This leads to kernel crash, as subsequent code assumes that requested memory is available. Fail cma allocation in case the request breaches the corresponding cma region size. Link: http://lkml.kernel.org/r/1478189211-3467-1-git-send-email-shashim@codeaurora.org Signed-off-by: Shiraz Hashim Cc: Catalin Marinas Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/cma.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/cma.c b/mm/cma.c index 384c2cb51b56..c960459eda7e 100644 --- a/mm/cma.c +++ b/mm/cma.c @@ -385,6 +385,9 @@ struct page *cma_alloc(struct cma *cma, size_t count, unsigned int align) bitmap_maxno = cma_bitmap_maxno(cma); bitmap_count = cma_bitmap_pages_to_bits(cma, count); + if (bitmap_count > bitmap_maxno) + return NULL; + for (;;) { mutex_lock(&cma->lock); bitmap_no = bitmap_find_next_zero_area_off(cma->bitmap, From dd111be69114cc867f8e826284559bfbc1c40e37 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Thu, 10 Nov 2016 10:46:19 -0800 Subject: [PATCH 186/224] swapfile: fix memory corruption via malformed swapfile When root activates a swap partition whose header has the wrong endianness, nr_badpages elements of badpages are swabbed before nr_badpages has been checked, leading to a buffer overrun of up to 8GB. This normally is not a security issue because it can only be exploited by root (more specifically, a process with CAP_SYS_ADMIN or the ability to modify a swap file/partition), and such a process can already e.g. modify swapped-out memory of any other userspace process on the system. Link: http://lkml.kernel.org/r/1477949533-2509-1-git-send-email-jann@thejh.net Signed-off-by: Jann Horn Acked-by: Kees Cook Acked-by: Jerome Marchand Acked-by: Johannes Weiner Cc: "Kirill A. Shutemov" Cc: Vlastimil Babka Cc: Hugh Dickins Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swapfile.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/swapfile.c b/mm/swapfile.c index 2210de290b54..f30438970cd1 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -2224,6 +2224,8 @@ static unsigned long read_swap_header(struct swap_info_struct *p, swab32s(&swap_header->info.version); swab32s(&swap_header->info.last_page); swab32s(&swap_header->info.nr_badpages); + if (swap_header->info.nr_badpages > MAX_SWAP_BADPAGES) + return 0; for (i = 0; i < swap_header->info.nr_badpages; i++) swab32s(&swap_header->info.badpages[i]); } From c3901e722b2975666f42748340df798114742d6d Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Thu, 10 Nov 2016 10:46:23 -0800 Subject: [PATCH 187/224] mm: hwpoison: fix thp split handling in memory_failure() When memory_failure() runs on a thp tail page after pmd is split, we trigger the following VM_BUG_ON_PAGE(): page:ffffd7cd819b0040 count:0 mapcount:0 mapping: (null) index:0x1 flags: 0x1fffc000400000(hwpoison) page dumped because: VM_BUG_ON_PAGE(!page_count(p)) ------------[ cut here ]------------ kernel BUG at /src/linux-dev/mm/memory-failure.c:1132! memory_failure() passed refcount and page lock from tail page to head page, which is not needed because we can pass any subpage to split_huge_page(). Fixes: 61f5d698cc97 ("mm: re-enable THP") Link: http://lkml.kernel.org/r/1477961577-7183-1-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi Cc: [4.5+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index de88f33519c0..19e796d36a62 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1112,10 +1112,10 @@ int memory_failure(unsigned long pfn, int trapno, int flags) } if (!PageHuge(p) && PageTransHuge(hpage)) { - lock_page(hpage); - if (!PageAnon(hpage) || unlikely(split_huge_page(hpage))) { - unlock_page(hpage); - if (!PageAnon(hpage)) + lock_page(p); + if (!PageAnon(p) || unlikely(split_huge_page(p))) { + unlock_page(p); + if (!PageAnon(p)) pr_err("Memory failure: %#lx: non anonymous thp\n", pfn); else @@ -1126,9 +1126,7 @@ int memory_failure(unsigned long pfn, int trapno, int flags) put_hwpoison_page(p); return -EBUSY; } - unlock_page(hpage); - get_hwpoison_page(p); - put_hwpoison_page(hpage); + unlock_page(p); VM_BUG_ON_PAGE(!page_count(p), p); hpage = compound_head(p); } From c6c7d83b9c9e6a8b3e6d84c820ac61fbffc9e396 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 10 Nov 2016 10:46:26 -0800 Subject: [PATCH 188/224] Revert "console: don't prefer first registered if DT specifies stdout-path" This reverts commit 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path"). The reverted commit changes existing behavior on which many ARM boards rely. Many ARM small-board-computers, like e.g. the Raspberry Pi have both a video output and a serial console. Depending on whether the user is using the device as a more regular computer; or as a headless device we need to have the console on either one or the other. Many users rely on the kernel behavior of the console being present on both outputs, before the reverted commit the console setup with no console= kernel arguments on an ARM board which sets stdout-path in dt would look like this: [root@localhost ~]# cat /proc/consoles ttyS0 -W- (EC p a) 4:64 tty0 -WU (E p ) 4:1 Where as after the reverted commit, it looks like this: [root@localhost ~]# cat /proc/consoles ttyS0 -W- (EC p a) 4:64 This commit reverts commit 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path") restoring the original behavior. Fixes: 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path") Link: http://lkml.kernel.org/r/20161104121135.4780-2-hdegoede@redhat.com Signed-off-by: Hans de Goede Cc: Paul Burton Cc: Rob Herring Cc: Frank Rowand Cc: Thorsten Leemhuis Cc: Greg Kroah-Hartman Cc: Tejun Heo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/of/base.c | 2 -- include/linux/console.h | 6 ------ kernel/printk/printk.c | 13 +------------ 3 files changed, 1 insertion(+), 20 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index d687e6de24a0..a0bccb54a9bd 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -2077,8 +2077,6 @@ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)) name = of_get_property(of_aliases, "stdout", NULL); if (name) of_stdout = of_find_node_opts_by_path(name, &of_stdout_options); - if (of_stdout) - console_set_by_of(); } if (!of_aliases) diff --git a/include/linux/console.h b/include/linux/console.h index 3672809234a7..d530c4627e54 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -173,12 +173,6 @@ static inline void console_sysfs_notify(void) #endif extern bool console_suspend_enabled; -#ifdef CONFIG_OF -extern void console_set_by_of(void); -#else -static inline void console_set_by_of(void) {} -#endif - /* Suspend and resume console messages over PM events */ extern void suspend_console(void); extern void resume_console(void); diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index de08fc90baaf..5028f4fd504a 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -253,17 +253,6 @@ static int preferred_console = -1; int console_set_on_cmdline; EXPORT_SYMBOL(console_set_on_cmdline); -#ifdef CONFIG_OF -static bool of_specified_console; - -void console_set_by_of(void) -{ - of_specified_console = true; -} -#else -# define of_specified_console false -#endif - /* Flag: console code may call schedule() */ static int console_may_schedule; @@ -2657,7 +2646,7 @@ void register_console(struct console *newcon) * didn't select a console we take the first one * that registers here. */ - if (preferred_console < 0 && !of_specified_console) { + if (preferred_console < 0) { if (newcon->index < 0) newcon->index = 0; if (newcon->setup == NULL || From d006c71f8ad2663dd47f81bf96bf655eeed428e2 Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 10 Nov 2016 10:46:29 -0800 Subject: [PATCH 189/224] ocfs2: fix not enough credit panic The following panic was caught when run ocfs2 disconfig single test (block size 512 and cluster size 8192). ocfs2_journal_dirty() return -ENOSPC, that means credits were used up. The total credit should include 3 times of "num_dx_leaves" from ocfs2_dx_dir_rebalance(), because 2 times will be consumed in ocfs2_dx_dir_transfer_leaf() and 1 time will be consumed in ocfs2_dx_dir_new_cluster() -> __ocfs2_dx_dir_new_cluster() -> ocfs2_dx_dir_format_cluster(). But only two times is included in ocfs2_dx_dir_rebalance_credits(), fix it. This can cause read-only fs(v4.1+) or panic for mainline linux depending on mount option. ------------[ cut here ]------------ kernel BUG at fs/ocfs2/journal.c:775! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea parport_pc parport acpi_cpufreq i2c_piix4 i2c_core pcspkr ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod CPU: 2 PID: 10601 Comm: dd Not tainted 4.1.12-71.el6uek.bug24939243.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016 task: ffff8800b6de6200 ti: ffff8800a7d48000 task.ti: ffff8800a7d48000 RIP: ocfs2_journal_dirty+0xa7/0xb0 [ocfs2] RSP: 0018:ffff8800a7d4b6d8 EFLAGS: 00010286 RAX: 00000000ffffffe4 RBX: 00000000814d0a9c RCX: 00000000000004f9 RDX: ffffffffa008e990 RSI: ffffffffa008f1ee RDI: ffff8800622b6460 RBP: ffff8800a7d4b6f8 R08: ffffffffa008f288 R09: ffff8800622b6460 R10: 0000000000000000 R11: 0000000000000282 R12: 0000000002c8421e R13: ffff88006d0cad00 R14: ffff880092beef60 R15: 0000000000000070 FS: 00007f9b83e92700(0000) GS:ffff8800be880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb2c0d1a000 CR3: 0000000008f80000 CR4: 00000000000406e0 Call Trace: ocfs2_dx_dir_transfer_leaf+0x159/0x1a0 [ocfs2] ocfs2_dx_dir_rebalance+0xd9b/0xea0 [ocfs2] ocfs2_find_dir_space_dx+0xd3/0x300 [ocfs2] ocfs2_prepare_dx_dir_for_insert+0x219/0x450 [ocfs2] ocfs2_prepare_dir_for_insert+0x1d6/0x580 [ocfs2] ocfs2_mknod+0x5a2/0x1400 [ocfs2] ocfs2_create+0x73/0x180 [ocfs2] vfs_create+0xd8/0x100 lookup_open+0x185/0x1c0 do_last+0x36d/0x780 path_openat+0x92/0x470 do_filp_open+0x4a/0xa0 do_sys_open+0x11a/0x230 SyS_open+0x1e/0x20 system_call_fastpath+0x12/0x71 Code: 1d 3f 29 09 00 48 85 db 74 1f 48 8b 03 0f 1f 80 00 00 00 00 48 8b 7b 08 48 83 c3 10 4c 89 e6 ff d0 48 8b 03 48 85 c0 75 eb eb 90 <0f> 0b eb fe 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 RIP ocfs2_journal_dirty+0xa7/0xb0 [ocfs2] ---[ end trace 91ac5312a6ee1288 ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Link: http://lkml.kernel.org/r/1478248135-31963-1-git-send-email-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Cc: Mark Fasheh Cc: Joel Becker Cc: Joseph Qi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index e7054e2ac922..3ecb9f337b7d 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -3699,7 +3699,7 @@ static void ocfs2_dx_dir_transfer_leaf(struct inode *dir, u32 split_hash, static int ocfs2_dx_dir_rebalance_credits(struct ocfs2_super *osb, struct ocfs2_dx_root_block *dx_root) { - int credits = ocfs2_clusters_to_blocks(osb->sb, 2); + int credits = ocfs2_clusters_to_blocks(osb->sb, 3); credits += ocfs2_calc_extend_credits(osb->sb, &dx_root->dr_list); credits += ocfs2_quota_trans_credits(osb->sb); From 96b96a96ddee4ba08ce4aeb8a558a3271fd4a7a7 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Thu, 10 Nov 2016 10:46:32 -0800 Subject: [PATCH 190/224] mm/hugetlb: fix huge page reservation leak in private mapping error paths Error paths in hugetlb_cow() and hugetlb_no_page() may free a newly allocated huge page. If a reservation was associated with the huge page, alloc_huge_page() consumed the reservation while allocating. When the newly allocated page is freed in free_huge_page(), it will increment the global reservation count. However, the reservation entry in the reserve map will remain. This is not an issue for shared mappings as the entry in the reserve map indicates a reservation exists. But, an entry in a private mapping reserve map indicates the reservation was consumed and no longer exists. This results in an inconsistency between the reserve map and the global reservation count. This 'leaks' a reserved huge page. Create a new routine restore_reserve_on_error() to restore the reserve entry in these specific error paths. This routine makes use of a new function vma_add_reservation() which will add a reserve entry for a specific address/page. In general, these error paths were rarely (if ever) taken on most architectures. However, powerpc contained arch specific code that that resulted in an extra fault and execution of these error paths on all private mappings. Fixes: 67961f9db8c4 ("mm/hugetlb: fix huge page reserve accounting for private mappings) Link: http://lkml.kernel.org/r/1476933077-23091-2-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz Reported-by: Jan Stancek Tested-by: Jan Stancek Reviewed-by: Aneesh Kumar K.V Acked-by: Hillf Danton Cc: Naoya Horiguchi Cc: Michal Hocko Cc: Kirill A . Shutemov Cc: Dave Hansen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index ec49d9ef1eef..418bf01a50ed 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1826,11 +1826,17 @@ static void return_unused_surplus_pages(struct hstate *h, * is not the case is if a reserve map was changed between calls. It * is the responsibility of the caller to notice the difference and * take appropriate action. + * + * vma_add_reservation is used in error paths where a reservation must + * be restored when a newly allocated huge page must be freed. It is + * to be called after calling vma_needs_reservation to determine if a + * reservation exists. */ enum vma_resv_mode { VMA_NEEDS_RESV, VMA_COMMIT_RESV, VMA_END_RESV, + VMA_ADD_RESV, }; static long __vma_reservation_common(struct hstate *h, struct vm_area_struct *vma, unsigned long addr, @@ -1856,6 +1862,14 @@ static long __vma_reservation_common(struct hstate *h, region_abort(resv, idx, idx + 1); ret = 0; break; + case VMA_ADD_RESV: + if (vma->vm_flags & VM_MAYSHARE) + ret = region_add(resv, idx, idx + 1); + else { + region_abort(resv, idx, idx + 1); + ret = region_del(resv, idx, idx + 1); + } + break; default: BUG(); } @@ -1903,6 +1917,56 @@ static void vma_end_reservation(struct hstate *h, (void)__vma_reservation_common(h, vma, addr, VMA_END_RESV); } +static long vma_add_reservation(struct hstate *h, + struct vm_area_struct *vma, unsigned long addr) +{ + return __vma_reservation_common(h, vma, addr, VMA_ADD_RESV); +} + +/* + * This routine is called to restore a reservation on error paths. In the + * specific error paths, a huge page was allocated (via alloc_huge_page) + * and is about to be freed. If a reservation for the page existed, + * alloc_huge_page would have consumed the reservation and set PagePrivate + * in the newly allocated page. When the page is freed via free_huge_page, + * the global reservation count will be incremented if PagePrivate is set. + * However, free_huge_page can not adjust the reserve map. Adjust the + * reserve map here to be consistent with global reserve count adjustments + * to be made by free_huge_page. + */ +static void restore_reserve_on_error(struct hstate *h, + struct vm_area_struct *vma, unsigned long address, + struct page *page) +{ + if (unlikely(PagePrivate(page))) { + long rc = vma_needs_reservation(h, vma, address); + + if (unlikely(rc < 0)) { + /* + * Rare out of memory condition in reserve map + * manipulation. Clear PagePrivate so that + * global reserve count will not be incremented + * by free_huge_page. This will make it appear + * as though the reservation for this page was + * consumed. This may prevent the task from + * faulting in the page at a later time. This + * is better than inconsistent global huge page + * accounting of reserve counts. + */ + ClearPagePrivate(page); + } else if (rc) { + rc = vma_add_reservation(h, vma, address); + if (unlikely(rc < 0)) + /* + * See above comment about rare out of + * memory condition. + */ + ClearPagePrivate(page); + } else + vma_end_reservation(h, vma, address); + } +} + struct page *alloc_huge_page(struct vm_area_struct *vma, unsigned long addr, int avoid_reserve) { @@ -3498,6 +3562,7 @@ static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma, spin_unlock(ptl); mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end); out_release_all: + restore_reserve_on_error(h, vma, address, new_page); put_page(new_page); out_release_old: put_page(old_page); @@ -3680,6 +3745,7 @@ static int hugetlb_no_page(struct mm_struct *mm, struct vm_area_struct *vma, spin_unlock(ptl); backout_unlocked: unlock_page(page); + restore_reserve_on_error(h, vma, address, page); put_page(page); goto out; } From 60da81ea61201f43387793d1cc3f501609d922ed Mon Sep 17 00:00:00 2001 From: Eryu Guan Date: Thu, 10 Nov 2016 10:46:35 -0800 Subject: [PATCH 191/224] mm/filemap: don't allow partially uptodate page for pipes Starting from 4.9-rc1 kernel, I started noticing some test failures of sendfile(2) and splice(2) (sendfile0N and splice01 from LTP) when testing on sub-page block size filesystems (tested both XFS and ext4), these syscalls start to return EIO in the tests. e.g. sendfile02 1 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 26, got: -1 sendfile02 2 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 24, got: -1 sendfile02 3 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 22, got: -1 sendfile02 4 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 20, got: -1 This is because that in sub-page block size cases, we don't need the whole page to be uptodate, only the part we care about is uptodate is OK (if fs has ->is_partially_uptodate defined). But page_cache_pipe_buf_confirm() doesn't have the ability to check the partially-uptodate case, it needs the whole page to be uptodate. So it returns EIO in this case. This is a regression introduced by commit 82c156f85384 ("switch generic_file_splice_read() to use of ->read_iter()"). Prior to the change, generic_file_splice_read() doesn't allow partially-uptodate page either, so it worked fine. Fix it by skipping the partially-uptodate check if we're working on a pipe in do_generic_file_read(), so we read the whole page from disk as long as the page is not uptodate. I think the other way to fix it is to add the ability to check & allow partially-uptodate page to page_cache_pipe_buf_confirm(), but that is much harder to do and seems gain little. Link: http://lkml.kernel.org/r/1477986187-12717-1-git-send-email-guaneryu@gmail.com Signed-off-by: Eryu Guan Reviewed-by: Jan Kara Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/filemap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/filemap.c b/mm/filemap.c index c7fe2f16503f..50b52fe51937 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1732,6 +1732,9 @@ static ssize_t do_generic_file_read(struct file *filp, loff_t *ppos, if (inode->i_blkbits == PAGE_SHIFT || !mapping->a_ops->is_partially_uptodate) goto page_not_up_to_date; + /* pipes can't handle partially uptodate pages */ + if (unlikely(iter->type & ITER_PIPE)) + goto page_not_up_to_date; if (!trylock_page(page)) goto page_not_up_to_date; /* Did it get truncated before we got the lock? */ From 70d78fe7c8b640b5acfad56ad341985b3810998a Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Thu, 10 Nov 2016 10:46:38 -0800 Subject: [PATCH 192/224] coredump: fix unfreezable coredumping task It could be not possible to freeze coredumping task when it waits for 'core_state->startup' completion, because threads are frozen in get_signal() before they got a chance to complete 'core_state->startup'. Inability to freeze a task during suspend will cause suspend to fail. Also CRIU uses cgroup freezer during dump operation. So with an unfreezable task the CRIU dump will fail because it waits for a transition from 'FREEZING' to 'FROZEN' state which will never happen. Use freezer_do_not_count() to tell freezer to ignore coredumping task while it waits for core_state->startup completion. Link: http://lkml.kernel.org/r/1475225434-3753-1-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin Acked-by: Pavel Machek Acked-by: Oleg Nesterov Cc: Alexander Viro Cc: Tejun Heo Cc: "Rafael J. Wysocki" Cc: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/coredump.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/coredump.c b/fs/coredump.c index 281b768000e6..eb9c92c9b20f 100644 --- a/fs/coredump.c +++ b/fs/coredump.c @@ -1,6 +1,7 @@ #include #include #include +#include #include #include #include @@ -423,7 +424,9 @@ static int coredump_wait(int exit_code, struct core_state *core_state) if (core_waiters > 0) { struct core_thread *ptr; + freezer_do_not_count(); wait_for_completion(&core_state->startup); + freezer_count(); /* * Wait for all the threads to become inactive, so that * all the thread context (extended register state, like From f773e36de3d77c4000ca914c9d146f55f2fd51e8 Mon Sep 17 00:00:00 2001 From: Greg Thelen Date: Thu, 10 Nov 2016 10:46:41 -0800 Subject: [PATCH 193/224] memcg: prevent memcg caches to be both OFF_SLAB & OBJFREELIST_SLAB While testing OBJFREELIST_SLAB integration with pagealloc, we found a bug where kmem_cache(sys) would be created with both CFLGS_OFF_SLAB & CFLGS_OBJFREELIST_SLAB. When it happened, critical allocations needed for loading drivers or creating new caches will fail. The original kmem_cache is created early making OFF_SLAB not possible. When kmem_cache(sys) is created, OFF_SLAB is possible and if pagealloc is enabled it will try to enable it first under certain conditions. Given kmem_cache(sys) reuses the original flag, you can have both flags at the same time resulting in allocation failures and odd behaviors. This fix discards allocator specific flags from memcg before calling create_cache. The bug exists since 4.6-rc1 and affects testing debug pagealloc configurations. Fixes: b03a017bebc4 ("mm/slab: introduce new slab management type, OBJFREELIST_SLAB") Link: http://lkml.kernel.org/r/1478553075-120242-1-git-send-email-thgarnie@google.com Signed-off-by: Greg Thelen Signed-off-by: Thomas Garnier Tested-by: Thomas Garnier Acked-by: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Vladimir Davydov Cc: Michal Hocko Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slab_common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/slab_common.c b/mm/slab_common.c index 71f0b28a1bec..329b03843863 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -533,8 +533,8 @@ void memcg_create_kmem_cache(struct mem_cgroup *memcg, s = create_cache(cache_name, root_cache->object_size, root_cache->size, root_cache->align, - root_cache->flags, root_cache->ctor, - memcg, root_cache); + root_cache->flags & CACHE_CREATE_MASK, + root_cache->ctor, memcg, root_cache); /* * If we could not create a memcg cache, do not complain, because * that's not critical at all as we can always proceed with the root From d7c19b066dcf4bd19c4385e8065558d4e74f9e73 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Thu, 10 Nov 2016 10:46:44 -0800 Subject: [PATCH 194/224] mm: kmemleak: scan .data.ro_after_init Limit the number of kmemleak false positives by including .data.ro_after_init in memory scanning. To achieve this we need to add symbols for start and end of the section to the linker scripts. The problem was been uncovered by commit 56989f6d8568 ("genetlink: mark families as __ro_after_init"). Link: http://lkml.kernel.org/r/1478274173-15218-1-git-send-email-jakub.kicinski@netronome.com Reviewed-by: Catalin Marinas Signed-off-by: Jakub Kicinski Cc: Arnd Bergmann Cc: Cong Wang Cc: Johannes Berg Cc: Martin Schwidefsky Cc: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/vmlinux.lds.S | 2 ++ include/asm-generic/sections.h | 3 +++ include/asm-generic/vmlinux.lds.h | 5 ++++- mm/kmemleak.c | 1 + 4 files changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 000e6e91f6a0..3667d20e997f 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -62,9 +62,11 @@ SECTIONS . = ALIGN(PAGE_SIZE); __start_ro_after_init = .; + __start_data_ro_after_init = .; .data..ro_after_init : { *(.data..ro_after_init) } + __end_data_ro_after_init = .; EXCEPTION_TABLE(16) . = ALIGN(PAGE_SIZE); __end_ro_after_init = .; diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h index af0254c09424..4df64a1fc09e 100644 --- a/include/asm-generic/sections.h +++ b/include/asm-generic/sections.h @@ -14,6 +14,8 @@ * [_sdata, _edata]: contains .data.* sections, may also contain .rodata.* * and/or .init.* sections. * [__start_rodata, __end_rodata]: contains .rodata.* sections + * [__start_data_ro_after_init, __end_data_ro_after_init]: + * contains data.ro_after_init section * [__init_begin, __init_end]: contains .init.* sections, but .init.text.* * may be out of this range on some architectures. * [_sinittext, _einittext]: contains .init.text.* sections @@ -31,6 +33,7 @@ extern char _data[], _sdata[], _edata[]; extern char __bss_start[], __bss_stop[]; extern char __init_begin[], __init_end[]; extern char _sinittext[], _einittext[]; +extern char __start_data_ro_after_init[], __end_data_ro_after_init[]; extern char _end[]; extern char __per_cpu_load[], __per_cpu_start[], __per_cpu_end[]; extern char __kprobes_text_start[], __kprobes_text_end[]; diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 30747960bc54..31e1d639abed 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -259,7 +259,10 @@ * own by defining an empty RO_AFTER_INIT_DATA. */ #ifndef RO_AFTER_INIT_DATA -#define RO_AFTER_INIT_DATA *(.data..ro_after_init) +#define RO_AFTER_INIT_DATA \ + __start_data_ro_after_init = .; \ + *(.data..ro_after_init) \ + __end_data_ro_after_init = .; #endif /* diff --git a/mm/kmemleak.c b/mm/kmemleak.c index e5355a5b423f..d1380ed93fdf 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1414,6 +1414,7 @@ static void kmemleak_scan(void) /* data/bss scanning */ scan_large_block(_sdata, _edata); scan_large_block(__bss_start, __bss_stop); + scan_large_block(__start_data_ro_after_init, __end_data_ro_after_init); #ifdef CONFIG_SMP /* per-cpu sections scanning */ From ae65a21fb851f09bf6341761d884fb86b644b75a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 10 Nov 2016 10:46:47 -0800 Subject: [PATCH 195/224] lib/stackdepot: export save/fetch stack for drivers Some drivers would like to record stacktraces in order to aide leak tracing. As stackdepot already provides a facility for only storing the unique traces, thereby reducing the memory required, export that functionality for use by drivers. The code was originally created for KASAN and moved under lib in commit cd11016e5f521 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") so that it could be shared with mm/. In turn, we want to share it now with drivers. Link: http://lkml.kernel.org/r/20161108133209.22704-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson Cc: Andrey Ryabinin Cc: Alexander Potapenko Cc: Dmitry Vyukov Cc: Joonsoo Kim Cc: "Kirill A. Shutemov" Cc: Daniel Vetter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/stackdepot.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/lib/stackdepot.c b/lib/stackdepot.c index 4d830e299989..f87d138e9672 100644 --- a/lib/stackdepot.c +++ b/lib/stackdepot.c @@ -192,6 +192,7 @@ void depot_fetch_stack(depot_stack_handle_t handle, struct stack_trace *trace) trace->entries = stack->entries; trace->skip = 0; } +EXPORT_SYMBOL_GPL(depot_fetch_stack); /** * depot_save_stack - save stack in a stack depot. @@ -283,3 +284,4 @@ depot_stack_handle_t depot_save_stack(struct stack_trace *trace, fast_exit: return retval; } +EXPORT_SYMBOL_GPL(depot_save_stack); From a76bcf557ef408b368cf26f52a60865bfc27b632 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:44 +0100 Subject: [PATCH 196/224] Kbuild: enable -Wmaybe-uninitialized warning for "make W=1" Traditionally, we have always had warnings about uninitialized variables enabled, as this is part of -Wall, and generally a good idea [1], but it also always produced false positives, mainly because this is a variation of the halting problem and provably impossible to get right in all cases [2]. Various people have identified cases that are particularly bad for false positives, and in commit e74fc973b6e5 ("Turn off -Wmaybe-uninitialized when building with -Os"), I turned off the warning for any build that was done with CC_OPTIMIZE_FOR_SIZE. This drastically reduced the number of false positive warnings in the default build but unfortunately had the side effect of turning the warning off completely in 'allmodconfig' builds, which in turn led to a lot of warnings (both actual bugs, and remaining false positives) to go in unnoticed. With commit 877417e6ffb9 ("Kbuild: change CC_OPTIMIZE_FOR_SIZE definition") enabled the warning again for allmodconfig builds in v4.7 and in v4.8-rc1, I had finally managed to address all warnings I get in an ARM allmodconfig build and most other maybe-uninitialized warnings for ARM randconfig builds. However, commit 6e8d666e9253 ("Disable "maybe-uninitialized" warning globally") was merged at the same time and disabled it completely for all configurations, because of false-positive warnings on x86 that I had not addressed until then. This caused a lot of actual bugs to get merged into mainline, and I sent several dozen patches for these during the v4.9 development cycle. Most of these are actual bugs, some are for correct code that is safe because it is only called under external constraints that make it impossible to run into the case that gcc sees, and in a few cases gcc is just stupid and finds something that can obviously never happen. I have now done a few thousand randconfig builds on x86 and collected all patches that I needed to address every single warning I got (I can provide the combined patch for the other warnings if anyone is interested), so I hope we can get the warning back and let people catch the actual bugs earlier. This reverts the change to disable the warning completely and for now brings it back at the "make W=1" level, so we can get it merged into mainline without introducing false positives. A follow-up patch enables it on all levels unless some configuration option turns it off because of false-positives. Link: https://rusty.ozlabs.org/?p=232 [1] Link: https://gcc.gnu.org/wiki/Better_Uninitialized_Warnings [2] Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- Makefile | 10 ++++++---- arch/arc/Makefile | 4 +++- scripts/Makefile.extrawarn | 3 +++ scripts/Makefile.ubsan | 4 ++++ 4 files changed, 16 insertions(+), 5 deletions(-) diff --git a/Makefile b/Makefile index f97f786de58d..06e2b73978e8 100644 --- a/Makefile +++ b/Makefile @@ -370,7 +370,7 @@ LDFLAGS_MODULE = CFLAGS_KERNEL = AFLAGS_KERNEL = LDFLAGS_vmlinux = -CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im +CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im -Wno-maybe-uninitialized CFLAGS_KCOV := $(call cc-option,-fsanitize-coverage=trace-pc,) @@ -620,7 +620,6 @@ ARCH_CFLAGS := include arch/$(SRCARCH)/Makefile KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) -KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,) KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION @@ -629,15 +628,18 @@ KBUILD_CFLAGS += $(call cc-option,-fdata-sections,) endif ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE -KBUILD_CFLAGS += -Os +KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,) else ifdef CONFIG_PROFILE_ALL_BRANCHES -KBUILD_CFLAGS += -O2 +KBUILD_CFLAGS += -O2 $(call cc-disable-warning,maybe-uninitialized,) else KBUILD_CFLAGS += -O2 endif endif +KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \ + $(call cc-disable-warning,maybe-uninitialized,)) + # Tell gcc to never replace conditional load with a non-conditional one KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 864adad52280..25f81a1db9f9 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -68,7 +68,9 @@ cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables $(cfi) ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE # Generic build system uses -O2, we want -O3 # Note: No need to add to cflags-y as that happens anyways -ARCH_CFLAGS += -O3 +# +# Disable the false maybe-uninitialized warings gcc spits out at -O3 +ARCH_CFLAGS += -O3 $(call cc-disable-warning,maybe-uninitialized,) endif # small data is default for elf32 tool-chain. If not usable, disable it diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn index 53449a6ff6aa..7fc2c5a3dbbe 100644 --- a/scripts/Makefile.extrawarn +++ b/scripts/Makefile.extrawarn @@ -36,6 +36,7 @@ warning-2 += -Wshadow warning-2 += $(call cc-option, -Wlogical-op) warning-2 += $(call cc-option, -Wmissing-field-initializers) warning-2 += $(call cc-option, -Wsign-compare) +warning-2 += $(call cc-option, -Wmaybe-uninitialized) warning-3 := -Wbad-function-cast warning-3 += -Wcast-qual @@ -59,6 +60,8 @@ endif KBUILD_CFLAGS += $(warning) else +KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized) + ifeq ($(cc-name),clang) KBUILD_CFLAGS += $(call cc-disable-warning, initializer-overrides) KBUILD_CFLAGS += $(call cc-disable-warning, unused-value) diff --git a/scripts/Makefile.ubsan b/scripts/Makefile.ubsan index dd779c40c8e6..3b1b13818d59 100644 --- a/scripts/Makefile.ubsan +++ b/scripts/Makefile.ubsan @@ -17,4 +17,8 @@ endif ifdef CONFIG_UBSAN_NULL CFLAGS_UBSAN += $(call cc-option, -fsanitize=null) endif + + # -fsanitize=* options makes GCC less smart than usual and + # increase number of 'maybe-uninitialized false-positives + CFLAGS_UBSAN += $(call cc-option, -Wno-maybe-uninitialized) endif From e84efa32b9d2763fb92e73c8942100d8f55ad4ed Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:45 +0100 Subject: [PATCH 197/224] NFSv4.1: work around -Wmaybe-uninitialized warning A bugfix introduced a harmless gcc warning in nfs4_slot_seqid_in_use if we enable -Wmaybe-uninitialized again: fs/nfs/nfs4session.c:203:54: error: 'cur_seq' may be used uninitialized in this function [-Werror=maybe-uninitialized] gcc is not smart enough to conclude that the IS_ERR/PTR_ERR pair results in a nonzero return value here. Using PTR_ERR_OR_ZERO() instead makes this clear to the compiler. Fixes: e09c978aae5b ("NFSv4.1: Fix Oopsable condition in server callback races") Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- fs/nfs/nfs4session.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index b62973045a3e..150c5a1879bf 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -178,12 +178,14 @@ static int nfs4_slot_get_seqid(struct nfs4_slot_table *tbl, u32 slotid, __must_hold(&tbl->slot_tbl_lock) { struct nfs4_slot *slot; + int ret; slot = nfs4_lookup_slot(tbl, slotid); - if (IS_ERR(slot)) - return PTR_ERR(slot); - *seq_nr = slot->seq_nr; - return 0; + ret = PTR_ERR_OR_ZERO(slot); + if (!ret) + *seq_nr = slot->seq_nr; + + return ret; } /* From 3a6d867612dce2035ca50cb02e7871d27c86aa72 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:46 +0100 Subject: [PATCH 198/224] x86: apm: avoid uninitialized data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit apm_bios_call() can fail, and return a status in its argument structure. If that status however is zero during a call from apm_get_power_status(), we end up using data that may have never been set, as reported by "gcc -Wmaybe-uninitialized": arch/x86/kernel/apm_32.c: In function ‘apm’: arch/x86/kernel/apm_32.c:1729:17: error: ‘bx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1835:5: error: ‘cx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1730:17: note: ‘cx’ was declared here arch/x86/kernel/apm_32.c:1842:27: error: ‘dx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1731:17: note: ‘dx’ was declared here This changes the function to return "APM_NO_ERROR" here, which makes the code more robust to broken BIOS versions, and avoids the warning. Signed-off-by: Arnd Bergmann Reviewed-by: Jiri Kosina Reviewed-by: Luis R. Rodriguez Signed-off-by: Linus Torvalds --- arch/x86/kernel/apm_32.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index c7364bd633e1..51287cd90bf6 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -1042,8 +1042,11 @@ static int apm_get_power_status(u_short *status, u_short *bat, u_short *life) if (apm_info.get_power_status_broken) return APM_32_UNSUPPORTED; - if (apm_bios_call(&call)) + if (apm_bios_call(&call)) { + if (!call.err) + return APM_NO_ERROR; return call.err; + } *status = call.ebx; *bat = call.ecx; if (apm_info.get_power_status_swabinminutes) { From 069013a9e2bbf1ace3f796cb664023dcd40730f7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:47 +0100 Subject: [PATCH 199/224] nios2: fix timer initcall return value When called more than twice, the nios2_time_init() function return an uninitialized value, as detected by gcc -Wmaybe-uninitialized arch/nios2/kernel/time.c: warning: 'ret' may be used uninitialized in this function This makes it return '0' here, matching the comment above the function. Acked-by: Ley Foon Tan Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- arch/nios2/kernel/time.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/nios2/kernel/time.c b/arch/nios2/kernel/time.c index d9563ddb337e..746bf5caaffc 100644 --- a/arch/nios2/kernel/time.c +++ b/arch/nios2/kernel/time.c @@ -324,6 +324,7 @@ static int __init nios2_time_init(struct device_node *timer) ret = nios2_clocksource_init(timer); break; default: + ret = 0; break; } From 92dfffee974f75c28b0c89f31318669091de1ec3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:48 +0100 Subject: [PATCH 200/224] s390: pci: don't print uninitialized data for debugging gcc correctly warns about an incorrect use of the 'pa' variable in case we pass an empty scatterlist to __s390_dma_map_sg: arch/s390/pci/pci_dma.c: In function '__s390_dma_map_sg': arch/s390/pci/pci_dma.c:309:13: warning: 'pa' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds a bogus initialization to the function to sanitize the debug output. I would have preferred a solution without the initialization, but I only got the report from the kbuild bot after turning on the warning again, and didn't manage to reproduce it myself. Signed-off-by: Arnd Bergmann Acked-by: Sebastian Ott Acked-by: Martin Schwidefsky Signed-off-by: Linus Torvalds --- arch/s390/pci/pci_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c index 7350c8bc13a2..6b2f72f523b9 100644 --- a/arch/s390/pci/pci_dma.c +++ b/arch/s390/pci/pci_dma.c @@ -423,7 +423,7 @@ static int __s390_dma_map_sg(struct device *dev, struct scatterlist *sg, dma_addr_t dma_addr_base, dma_addr; int flags = ZPCI_PTE_VALID; struct scatterlist *s; - unsigned long pa; + unsigned long pa = 0; int ret; size = PAGE_ALIGN(size); From ba13e98f2cebd55a3744c5ffaa08f9dca73bf521 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Thu, 10 Nov 2016 17:44:49 +0100 Subject: [PATCH 201/224] dib0700: fix nec repeat handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When receiving a nec repeat, ensure the correct scancode is repeated rather than a random value from the stack. This removes the need for the bogus uninitialized_var() and also fixes the warnings: drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’: drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function [sean addon: So after writing the patch and submitting it, I've bought the hardware on ebay. Without this patch you get random scancodes on nec repeats, which the patch indeed fixes.] Signed-off-by: Sean Young Tested-by: Sean Young Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/media/usb/dvb-usb/dib0700_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index 92d5408684ac..47ce9d5de4c6 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -704,7 +704,7 @@ static void dib0700_rc_urb_completion(struct urb *purb) struct dvb_usb_device *d = purb->context; struct dib0700_rc_response *poll_reply; enum rc_type protocol; - u32 uninitialized_var(keycode); + u32 keycode; u8 toggle; deb_info("%s()\n", __func__); @@ -745,7 +745,8 @@ static void dib0700_rc_urb_completion(struct urb *purb) poll_reply->nec.data == 0x00 && poll_reply->nec.not_data == 0xff) { poll_reply->data_state = 2; - break; + rc_repeat(d->rc_dev); + goto resubmit; } if ((poll_reply->nec.data ^ poll_reply->nec.not_data) != 0xff) { From 9cdbe14fb468586454d26d7ff878e7b698449727 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:50 +0100 Subject: [PATCH 202/224] rc: print correct variable for z8f0811 A recent rework accidentally left a debugging printk untouched while changing the meaning of the variables, leading to an uninitialized variable being printed: drivers/media/i2c/ir-kbd-i2c.c: In function 'get_key_haup_common': drivers/media/i2c/ir-kbd-i2c.c:62:2: error: 'toggle' may be used uninitialized in this function [-Werror=maybe-uninitialized] This prints the correct one instead, as we did before the patch. Fixes: 00bb820755ed ("[media] rc: Hauppauge z8f0811 can decode RC6") Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/media/i2c/ir-kbd-i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c index f95a6bc839d5..cede3975d04b 100644 --- a/drivers/media/i2c/ir-kbd-i2c.c +++ b/drivers/media/i2c/ir-kbd-i2c.c @@ -118,7 +118,7 @@ static int get_key_haup_common(struct IR_i2c *ir, enum rc_type *protocol, *protocol = RC_TYPE_RC6_MCE; dev &= 0x7f; dprintk(1, "ir hauppauge (rc6-mce): t%d vendor=%d dev=%d code=%d\n", - toggle, vendor, dev, code); + *ptoggle, vendor, dev, code); } else { *ptoggle = 0; *protocol = RC_TYPE_RC6_6A_32; From beae2c9eb500d5509feb9fd148d34d97a9b1d276 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:51 +0100 Subject: [PATCH 203/224] crypto: aesni: shut up -Wmaybe-uninitialized warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The rfc4106 encrypy/decrypt helper functions cause an annoying false-positive warning in allmodconfig if we turn on -Wmaybe-uninitialized warnings again: arch/x86/crypto/aesni-intel_glue.c: In function ‘helper_rfc4106_decrypt’: include/linux/scatterlist.h:67:31: warning: ‘dst_sg_walk.sg’ may be used uninitialized in this function [-Wmaybe-uninitialized] The problem seems to be that the compiler doesn't track the state of the 'one_entry_in_sg' variable across the kernel_fpu_begin/kernel_fpu_end section. This takes the easy way out by adding a bogus initialization, which should be harmless enough to get the patch into v4.9 so we can turn on this warning again by default without producing useless output. A follow-up patch for v4.10 rearranges the code to make the warning go away. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- arch/x86/crypto/aesni-intel_glue.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index 0ab5ee1c26af..aa8b0672f87a 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -888,7 +888,7 @@ static int helper_rfc4106_encrypt(struct aead_request *req) unsigned long auth_tag_len = crypto_aead_authsize(tfm); u8 iv[16] __attribute__ ((__aligned__(AESNI_ALIGN))); struct scatter_walk src_sg_walk; - struct scatter_walk dst_sg_walk; + struct scatter_walk dst_sg_walk = {}; unsigned int i; /* Assuming we are supporting rfc4106 64-bit extended */ @@ -968,7 +968,7 @@ static int helper_rfc4106_decrypt(struct aead_request *req) u8 iv[16] __attribute__ ((__aligned__(AESNI_ALIGN))); u8 authTag[16]; struct scatter_walk src_sg_walk; - struct scatter_walk dst_sg_walk; + struct scatter_walk dst_sg_walk = {}; unsigned int i; if (unlikely(req->assoclen != 16 && req->assoclen != 20)) From c50e90d0d2bc489901c9adb825609cbbb2f7ffa1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:52 +0100 Subject: [PATCH 204/224] infiniband: shut up a maybe-uninitialized warning Some configurations produce this harmless warning when built with gcc -Wmaybe-uninitialized: infiniband/core/cma.c: In function 'cma_get_net_dev': infiniband/core/cma.c:1242:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] I previously reported this for the powerpc64 defconfig, but have now reproduced the same thing for x86 as well, using gcc-5 or higher. The code looks correct to me, and this change just rearranges it by making sure we alway initialize the entire address structure to make the warning disappear. My first approach added an initialization at the time of the declaration, which Doug commented may be too costly, so I hope this version doesn't add overhead. Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.7-rc6/buildall.powerpc.ppc64_defconfig.log.passed Link: https://patchwork.kernel.org/patch/9212825/ Acked-by: Haggai Eran Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/infiniband/core/cma.c | 54 ++++++++++++++++++----------------- 1 file changed, 28 insertions(+), 26 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 36bf50ebb187..89a6b0546804 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1094,47 +1094,47 @@ static void cma_save_ib_info(struct sockaddr *src_addr, } } -static void cma_save_ip4_info(struct sockaddr *src_addr, - struct sockaddr *dst_addr, +static void cma_save_ip4_info(struct sockaddr_in *src_addr, + struct sockaddr_in *dst_addr, struct cma_hdr *hdr, __be16 local_port) { - struct sockaddr_in *ip4; - if (src_addr) { - ip4 = (struct sockaddr_in *)src_addr; - ip4->sin_family = AF_INET; - ip4->sin_addr.s_addr = hdr->dst_addr.ip4.addr; - ip4->sin_port = local_port; + *src_addr = (struct sockaddr_in) { + .sin_family = AF_INET, + .sin_addr.s_addr = hdr->dst_addr.ip4.addr, + .sin_port = local_port, + }; } if (dst_addr) { - ip4 = (struct sockaddr_in *)dst_addr; - ip4->sin_family = AF_INET; - ip4->sin_addr.s_addr = hdr->src_addr.ip4.addr; - ip4->sin_port = hdr->port; + *dst_addr = (struct sockaddr_in) { + .sin_family = AF_INET, + .sin_addr.s_addr = hdr->src_addr.ip4.addr, + .sin_port = hdr->port, + }; } } -static void cma_save_ip6_info(struct sockaddr *src_addr, - struct sockaddr *dst_addr, +static void cma_save_ip6_info(struct sockaddr_in6 *src_addr, + struct sockaddr_in6 *dst_addr, struct cma_hdr *hdr, __be16 local_port) { - struct sockaddr_in6 *ip6; - if (src_addr) { - ip6 = (struct sockaddr_in6 *)src_addr; - ip6->sin6_family = AF_INET6; - ip6->sin6_addr = hdr->dst_addr.ip6; - ip6->sin6_port = local_port; + *src_addr = (struct sockaddr_in6) { + .sin6_family = AF_INET6, + .sin6_addr = hdr->dst_addr.ip6, + .sin6_port = local_port, + }; } if (dst_addr) { - ip6 = (struct sockaddr_in6 *)dst_addr; - ip6->sin6_family = AF_INET6; - ip6->sin6_addr = hdr->src_addr.ip6; - ip6->sin6_port = hdr->port; + *dst_addr = (struct sockaddr_in6) { + .sin6_family = AF_INET6, + .sin6_addr = hdr->src_addr.ip6, + .sin6_port = hdr->port, + }; } } @@ -1159,10 +1159,12 @@ static int cma_save_ip_info(struct sockaddr *src_addr, switch (cma_get_ip_ver(hdr)) { case 4: - cma_save_ip4_info(src_addr, dst_addr, hdr, port); + cma_save_ip4_info((struct sockaddr_in *)src_addr, + (struct sockaddr_in *)dst_addr, hdr, port); break; case 6: - cma_save_ip6_info(src_addr, dst_addr, hdr, port); + cma_save_ip6_info((struct sockaddr_in6 *)src_addr, + (struct sockaddr_in6 *)dst_addr, hdr, port); break; default: return -EAFNOSUPPORT; From 75ed26878b4cc0ca1c9d8ed5a642b45b60c231d9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:53 +0100 Subject: [PATCH 205/224] pcmcia: fix return value of soc_pcmcia_regulator_set The newly introduced soc_pcmcia_regulator_set() function sometimes returns without setting its return code, as shown by this warning: drivers/pcmcia/soc_common.c: In function 'soc_pcmcia_regulator_set': drivers/pcmcia/soc_common.c:112:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes it to propagate the regulator_disable() result instead. Fixes: ac61b6001a63 ("pcmcia: soc_common: add support for Vcc and Vpp regulators") Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/pcmcia/soc_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 153f3122283d..b6b316de055c 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -107,7 +107,7 @@ int soc_pcmcia_regulator_set(struct soc_pcmcia_socket *skt, ret = regulator_enable(r->reg); } else { - regulator_disable(r->reg); + ret = regulator_disable(r->reg); } if (ret == 0) r->on = on; From 4324cb23f4569edcf76e637cdb3c1dfe8e8a85e4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:54 +0100 Subject: [PATCH 206/224] Kbuild: enable -Wmaybe-uninitialized warnings by default Previously the warnings were added back at the W=1 level and above, this now turns them on again by default, assuming that we have addressed all warnings and again have a clean build for v4.10. I found a number of new warnings in linux-next already and submitted bugfixes for those. Hopefully they are caught by the 0day builder in the future as soon as this patch is merged. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- scripts/Makefile.extrawarn | 2 -- 1 file changed, 2 deletions(-) diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn index 7fc2c5a3dbbe..7c321a603b07 100644 --- a/scripts/Makefile.extrawarn +++ b/scripts/Makefile.extrawarn @@ -60,8 +60,6 @@ endif KBUILD_CFLAGS += $(warning) else -KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized) - ifeq ($(cc-name),clang) KBUILD_CFLAGS += $(call cc-disable-warning, initializer-overrides) KBUILD_CFLAGS += $(call cc-disable-warning, unused-value) From 409ae5a76e0505c8ffe1424f9c00dbf2ec7b5eea Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Matias=20Bj=C3=B8rling?= Date: Thu, 10 Nov 2016 12:26:57 +0100 Subject: [PATCH 207/224] lightnvm: invalid offset calculation for lba_shift MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ns->lba_shift assumes its value to be the logarithmic of the LA size. A previous patch duplicated the lba_shift calculation into lightnvm. It prematurely also subtracted a 512byte shift, which commonly is applied per-command. The 512byte shift being subtracted twice led to data loss when restoring the logical to physical mapping table from device and when issuing I/O commands using rrpc. Fix offset by removing the 512byte shift subtraction when calculating lba_shift. Fixes: b0b4e09c1ae7 "lightnvm: control life of nvm_dev in driver" Reported-by: Javier González Signed-off-by: Matias Bjørling Signed-off-by: Jens Axboe --- drivers/nvme/host/lightnvm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/lightnvm.c b/drivers/nvme/host/lightnvm.c index f5e3011e31fc..5daf2f4be0cd 100644 --- a/drivers/nvme/host/lightnvm.c +++ b/drivers/nvme/host/lightnvm.c @@ -612,7 +612,7 @@ int nvme_nvm_register(struct nvme_ns *ns, char *disk_name, int node, ret = nvm_register(dev); - ns->lba_shift = ilog2(dev->sec_size) - 9; + ns->lba_shift = ilog2(dev->sec_size); if (sysfs_create_group(&dev->dev.kobj, attrs)) pr_warn("%s: failed to create sysfs group for identification\n", From 0cbc72a1781250f373327dd7e306e33859a42154 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 11 Nov 2016 18:28:50 -0700 Subject: [PATCH 208/224] aoe: fix crash in page count manipulation aoeblk contains some mysterious code, that wants to elevate the bio vec page counts while it's under IO. That is not needed, it's fragile, and it's causing kernel oopses for some. Reported-by: Tested-by: Don Koch Tested-by: Tested-by: Don Koch Signed-off-by: Jens Axboe --- drivers/block/aoe/aoecmd.c | 41 -------------------------------------- 1 file changed, 41 deletions(-) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index ab19adb07a12..3c606c09fd5a 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -853,45 +853,6 @@ rqbiocnt(struct request *r) return n; } -/* This can be removed if we are certain that no users of the block - * layer will ever use zero-count pages in bios. Otherwise we have to - * protect against the put_page sometimes done by the network layer. - * - * See http://oss.sgi.com/archives/xfs/2007-01/msg00594.html for - * discussion. - * - * We cannot use get_page in the workaround, because it insists on a - * positive page count as a precondition. So we use _refcount directly. - */ -static void -bio_pageinc(struct bio *bio) -{ - struct bio_vec bv; - struct page *page; - struct bvec_iter iter; - - bio_for_each_segment(bv, bio, iter) { - /* Non-zero page count for non-head members of - * compound pages is no longer allowed by the kernel. - */ - page = compound_head(bv.bv_page); - page_ref_inc(page); - } -} - -static void -bio_pagedec(struct bio *bio) -{ - struct page *page; - struct bio_vec bv; - struct bvec_iter iter; - - bio_for_each_segment(bv, bio, iter) { - page = compound_head(bv.bv_page); - page_ref_dec(page); - } -} - static void bufinit(struct buf *buf, struct request *rq, struct bio *bio) { @@ -899,7 +860,6 @@ bufinit(struct buf *buf, struct request *rq, struct bio *bio) buf->rq = rq; buf->bio = bio; buf->iter = bio->bi_iter; - bio_pageinc(bio); } static struct buf * @@ -1127,7 +1087,6 @@ aoe_end_buf(struct aoedev *d, struct buf *buf) if (buf == d->ip.buf) d->ip.buf = NULL; rq = buf->rq; - bio_pagedec(buf->bio); mempool_free(buf, d->bufpool); n = (unsigned long) rq->special; rq->special = (void *) --n; From d70674eeaa5efdefb99928691161578ae0a80316 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 25 Oct 2016 17:55:04 +0200 Subject: [PATCH 209/224] iio: maxim_thermocouple: detect invalid storage size in read() As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other than 2 or 4 will result in undefined behavior: drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read': drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This probably cannot happen, but returning -EINVAL here is appropriate and makes gcc happy and the code more robust. Fixes: 231147ee77f3 ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads") Signed-off-by: Arnd Bergmann Signed-off-by: Jonathan Cameron (cherry picked from commit 32cb7d27e65df9daa7cee8f1fdf7b259f214bee2) Signed-off-by: Greg Kroah-Hartman --- drivers/iio/temperature/maxim_thermocouple.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c index 066161a4bccd..f962f31a5eb2 100644 --- a/drivers/iio/temperature/maxim_thermocouple.c +++ b/drivers/iio/temperature/maxim_thermocouple.c @@ -136,6 +136,8 @@ static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, ret = spi_read(data->spi, (void *)&buf32, storage_bytes); *val = be32_to_cpu(buf32); break; + default: + ret = -EINVAL; } if (ret) From 7724325a19fb0a51d2a69bd2915b33f0ff197f5a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Nov 2016 12:46:26 -0200 Subject: [PATCH 210/224] dvb-usb: move data_mutex to struct dvb_usb_device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The data_mutex is initialized too late, as it is needed for each device driver's power control, causing an OOPS: dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] __mutex_lock_slowpath+0x6f/0x100 PGD 0 Oops: 0002 [#1] SMP Modules linked in: dvb_usb_cinergyT2(+) dvb_usb CPU: 0 PID: 2029 Comm: modprobe Not tainted 4.9.0-rc4-dvbmod #24 Hardware name: FUJITSU LIFEBOOK A544/FJNBB35 , BIOS Version 1.17 05/09/2014 task: ffff88020e943840 task.stack: ffff8801f36ec000 RIP: 0010:[] [] __mutex_lock_slowpath+0x6f/0x100 RSP: 0018:ffff8801f36efb10 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88021509bdc8 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88021509bdcc RBP: ffff8801f36efb58 R08: ffff88021f216320 R09: 0000000000100000 R10: ffff88021f216320 R11: 00000023fee6c5a1 R12: ffff88020e943840 R13: ffff88021509bdcc R14: 00000000ffffffff R15: ffff88021509bdd0 FS: 00007f21adb86740(0000) GS:ffff88021f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000215bce000 CR4: 00000000001406f0 Call Trace: mutex_lock+0x16/0x25 cinergyt2_power_ctrl+0x1f/0x60 [dvb_usb_cinergyT2] dvb_usb_device_init+0x21e/0x5d0 [dvb_usb] cinergyt2_usb_probe+0x21/0x50 [dvb_usb_cinergyT2] usb_probe_interface+0xf3/0x2a0 driver_probe_device+0x208/0x2b0 __driver_attach+0x87/0x90 driver_probe_device+0x2b0/0x2b0 bus_for_each_dev+0x52/0x80 bus_add_driver+0x1a3/0x220 driver_register+0x56/0xd0 usb_register_driver+0x77/0x130 do_one_initcall+0x46/0x180 free_vmap_area_noflush+0x38/0x70 kmem_cache_alloc+0x84/0xc0 do_init_module+0x50/0x1be load_module+0x1d8b/0x2100 find_symbol_in_section+0xa0/0xa0 SyS_finit_module+0x89/0x90 entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 a7 1d 00 00 8b 03 83 f8 01 0f 84 97 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 4c 89 3c 24 41 be ff ff ff ff 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 1a 49 c7 44 24 08 02 00 00 00 c6 43 RIP [] __mutex_lock_slowpath+0x6f/0x100 RSP CR2: 0000000000000000 So, move it to the struct dvb_usb_device and initialize it before calling the driver's callbacks. Reported-by: Jörg Otte Tested-by: Jörg Otte Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/usb/dvb-usb/af9005.c | 33 ++++++------------ drivers/media/usb/dvb-usb/cinergyT2-core.c | 33 ++++++------------ drivers/media/usb/dvb-usb/cxusb.c | 39 +++++++++------------ drivers/media/usb/dvb-usb/cxusb.h | 1 - drivers/media/usb/dvb-usb/dtt200u.c | 40 +++++++++------------- drivers/media/usb/dvb-usb/dvb-usb-init.c | 1 + drivers/media/usb/dvb-usb/dvb-usb.h | 9 +++-- 7 files changed, 61 insertions(+), 95 deletions(-) diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c index b257780fb380..7853261906b1 100644 --- a/drivers/media/usb/dvb-usb/af9005.c +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -53,7 +53,6 @@ struct af9005_device_state { u8 sequence; int led_state; unsigned char data[256]; - struct mutex data_mutex; }; static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, @@ -72,7 +71,7 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, return -EINVAL; } - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = 14; /* rest of buffer length low */ st->data[1] = 0; /* rest of buffer length high */ @@ -140,7 +139,7 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, values[i] = st->data[8 + i]; ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -481,7 +480,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, } packet_len = wlen + 5; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = (u8) (packet_len & 0xff); st->data[1] = (u8) ((packet_len & 0xff00) >> 8); @@ -512,7 +511,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, rbuf[i] = st->data[i + 7]; } - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -523,7 +522,7 @@ int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, u8 seq; int ret, i; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); memset(st->data, 0, sizeof(st->data)); @@ -559,7 +558,7 @@ int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, for (i = 0; i < len; i++) values[i] = st->data[6 + i]; } - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -847,7 +846,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) return 0; } - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); /* deb_info("rc_query\n"); */ st->data[0] = 3; /* rest of packet length low */ @@ -890,7 +889,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) } ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -1004,20 +1003,8 @@ static struct dvb_usb_device_properties af9005_properties; static int af9005_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct af9005_device_state *st; - int ret; - - ret = dvb_usb_device_init(intf, &af9005_properties, - THIS_MODULE, &d, adapter_nr); - - if (ret < 0) - return ret; - - st = d->priv; - mutex_init(&st->data_mutex); - - return 0; + return dvb_usb_device_init(intf, &af9005_properties, + THIS_MODULE, NULL, adapter_nr); } enum af9005_usb_table_entry { diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c index 8ac825413d5a..290275bc7fde 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-core.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c @@ -42,7 +42,6 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct cinergyt2_state { u8 rc_counter; unsigned char data[64]; - struct mutex data_mutex; }; /* We are missing a release hook with usb_device data */ @@ -56,12 +55,12 @@ static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable) struct cinergyt2_state *st = d->priv; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER; st->data[1] = enable ? 1 : 0; ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -71,12 +70,12 @@ static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable) struct cinergyt2_state *st = d->priv; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_SLEEP_MODE; st->data[1] = enable ? 0 : 1; ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -89,7 +88,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev); - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION; ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0); @@ -97,7 +96,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep " "state info\n"); } - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); /* Copy this pointer as we are gonna need it in the release phase */ cinergyt2_usb_device = adap->dev; @@ -166,7 +165,7 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) *state = REMOTE_NO_KEY_PRESSED; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS; ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); @@ -202,29 +201,17 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) } ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } static int cinergyt2_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct cinergyt2_state *st; - int ret; - - ret = dvb_usb_device_init(intf, &cinergyt2_properties, - THIS_MODULE, &d, adapter_nr); - if (ret < 0) - return ret; - - st = d->priv; - mutex_init(&st->data_mutex); - - return 0; + return dvb_usb_device_init(intf, &cinergyt2_properties, + THIS_MODULE, NULL, adapter_nr); } - static struct usb_device_id cinergyt2_usb_table[] = { { USB_DEVICE(USB_VID_TERRATEC, 0x0038) }, { 0 } diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 39772812269d..243403081fa5 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -68,7 +68,7 @@ static int cxusb_ctrl_msg(struct dvb_usb_device *d, wo = (rbuf == NULL || rlen == 0); /* write-only */ - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = cmd; memcpy(&st->data[1], wbuf, wlen); if (wo) @@ -77,7 +77,7 @@ static int cxusb_ctrl_msg(struct dvb_usb_device *d, ret = dvb_usb_generic_rw(d, st->data, 1 + wlen, rbuf, rlen, 0); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -1461,43 +1461,36 @@ static struct dvb_usb_device_properties cxusb_mygica_t230_properties; static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct cxusb_state *st; - if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_needsfirmware_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_rev2_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties, - THIS_MODULE, &d, adapter_nr) || - 0) { - st = d->priv; - mutex_init(&st->data_mutex); - + THIS_MODULE, NULL, adapter_nr) || + 0) return 0; - } return -EINVAL; } diff --git a/drivers/media/usb/dvb-usb/cxusb.h b/drivers/media/usb/dvb-usb/cxusb.h index 9f3ee0e47d5c..18acda19527a 100644 --- a/drivers/media/usb/dvb-usb/cxusb.h +++ b/drivers/media/usb/dvb-usb/cxusb.h @@ -37,7 +37,6 @@ struct cxusb_state { struct i2c_client *i2c_client_tuner; unsigned char data[MAX_XFER_SIZE]; - struct mutex data_mutex; }; #endif diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c index f88572c7ae7c..fcbff7fb0c4e 100644 --- a/drivers/media/usb/dvb-usb/dtt200u.c +++ b/drivers/media/usb/dvb-usb/dtt200u.c @@ -22,7 +22,6 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct dtt200u_state { unsigned char data[80]; - struct mutex data_mutex; }; static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) @@ -30,23 +29,24 @@ static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) struct dtt200u_state *st = d->priv; int ret = 0; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = SET_INIT; if (onoff) ret = dvb_usb_generic_write(d, st->data, 2); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { - struct dtt200u_state *st = adap->dev->priv; + struct dvb_usb_device *d = adap->dev; + struct dtt200u_state *st = d->priv; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = SET_STREAMING; st->data[1] = onoff; @@ -61,26 +61,27 @@ static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) ret = dvb_usb_generic_write(adap->dev, st->data, 1); ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) { - struct dtt200u_state *st = adap->dev->priv; + struct dvb_usb_device *d = adap->dev; + struct dtt200u_state *st = d->priv; int ret; pid = onoff ? pid : 0; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = SET_PID_FILTER; st->data[1] = index; st->data[2] = pid & 0xff; st->data[3] = (pid >> 8) & 0x1f; ret = dvb_usb_generic_write(adap->dev, st->data, 4); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -91,7 +92,7 @@ static int dtt200u_rc_query(struct dvb_usb_device *d) u32 scancode; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = GET_RC_CODE; ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); @@ -126,7 +127,7 @@ static int dtt200u_rc_query(struct dvb_usb_device *d) deb_info("st->data: %*ph\n", 5, st->data); ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -145,24 +146,17 @@ static struct dvb_usb_device_properties wt220u_miglia_properties; static int dtt200u_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct dtt200u_state *st; - if (0 == dvb_usb_device_init(intf, &dtt200u_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_fc_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_miglia_properties, - THIS_MODULE, &d, adapter_nr)) { - st = d->priv; - mutex_init(&st->data_mutex); - + THIS_MODULE, NULL, adapter_nr)) return 0; - } return -ENODEV; } diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c index 3896ba9a4179..84308569e7dc 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c @@ -142,6 +142,7 @@ static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums) { int ret = 0; + mutex_init(&d->data_mutex); mutex_init(&d->usb_mutex); mutex_init(&d->i2c_mutex); diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h index 639c4678c65b..107255b08b2b 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb.h +++ b/drivers/media/usb/dvb-usb/dvb-usb.h @@ -404,8 +404,12 @@ struct dvb_usb_adapter { * Powered is in/decremented for each call to modify the state. * @udev: pointer to the device's struct usb_device. * - * @usb_mutex: semaphore of USB control messages (reading needs two messages) - * @i2c_mutex: semaphore for i2c-transfers + * @data_mutex: mutex to protect the data structure used to store URB data + * @usb_mutex: mutex of USB control messages (reading needs two messages). + * Please notice that this mutex is used internally at the generic + * URB control functions. So, drivers using dvb_usb_generic_rw() and + * derivated functions should not lock it internally. + * @i2c_mutex: mutex for i2c-transfers * * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB * @@ -433,6 +437,7 @@ struct dvb_usb_device { int powered; /* locking */ + struct mutex data_mutex; struct mutex usb_mutex; /* i2c */ From 1596c387e970cb680d4031fbe4d6eb2c2a4ddb63 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Nov 2016 12:46:27 -0200 Subject: [PATCH 211/224] gp8psk: fix gp8psk_usb_in_op() logic Commit bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") fixed the usage of DMA on stack, but the memcpy was wrong for gp8psk_usb_in_op(). Fix it. From Derek's email: "Fix confirmed using 2 different Skywalker models with HD mpeg4, SD mpeg2." Suggested-by: Johannes Stezenbach Fixes: bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") Tested-by: Derek Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/usb/dvb-usb/gp8psk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index adfd76491451..2829e3082d15 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -67,7 +67,6 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 return ret; while (ret >= 0 && ret != blen && try < 3) { - memcpy(st->data, b, blen); ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), req, @@ -81,8 +80,10 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 if (ret < 0 || ret != blen) { warn("usb in %d operation failed.", req); ret = -EIO; - } else + } else { ret = 0; + memcpy(b, st->data, blen); + } deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index); debug_dump(b,blen,deb_xfer); From 7a0786c19d65bd4502b4a53aec9ef75e18192a00 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Nov 2016 12:46:28 -0200 Subject: [PATCH 212/224] gp8psk: Fix DVB frontend attach The DVB binding schema at the DVB core assumes that the frontend is a separate driver. Faling to do that causes OOPS when the module is removed, as it tries to do a symbol_put_addr on an internal symbol, causing craches like: WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70 Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core] CPU: 1 PID: 28102 Comm: rmmod Tainted: P WC O 4.8.4-build.1 #1 Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009 Call Trace: dump_stack+0x44/0x64 __warn+0xfa/0x120 module_put+0x57/0x70 module_put+0x57/0x70 warn_slowpath_null+0x23/0x30 module_put+0x57/0x70 gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk] symbol_put_addr+0x27/0x50 dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb] From Derek's tests: "Attach bug is fixed, tuning works, module unloads without crashing. Everything seems ok!" Reported-by: Derek Tested-by: Derek Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/dvb-frontends/Kconfig | 5 + drivers/media/dvb-frontends/Makefile | 1 + .../dvb-usb => dvb-frontends}/gp8psk-fe.c | 135 +++++++++++------- drivers/media/dvb-frontends/gp8psk-fe.h | 82 +++++++++++ drivers/media/usb/dvb-usb/Makefile | 2 +- drivers/media/usb/dvb-usb/gp8psk.c | 106 ++++++++++---- drivers/media/usb/dvb-usb/gp8psk.h | 63 -------- 7 files changed, 244 insertions(+), 150 deletions(-) rename drivers/media/{usb/dvb-usb => dvb-frontends}/gp8psk-fe.c (72%) create mode 100644 drivers/media/dvb-frontends/gp8psk-fe.h diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig index 012225587c25..b71b747ee0ba 100644 --- a/drivers/media/dvb-frontends/Kconfig +++ b/drivers/media/dvb-frontends/Kconfig @@ -513,6 +513,11 @@ config DVB_AS102_FE depends on DVB_CORE default DVB_AS102 +config DVB_GP8PSK_FE + tristate + depends on DVB_CORE + default DVB_USB_GP8PSK + comment "DVB-C (cable) frontends" depends on DVB_CORE diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile index e90165ad361b..93921a4eaa27 100644 --- a/drivers/media/dvb-frontends/Makefile +++ b/drivers/media/dvb-frontends/Makefile @@ -121,6 +121,7 @@ obj-$(CONFIG_DVB_RTL2832_SDR) += rtl2832_sdr.o obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o obj-$(CONFIG_DVB_AF9033) += af9033.o obj-$(CONFIG_DVB_AS102_FE) += as102_fe.o +obj-$(CONFIG_DVB_GP8PSK_FE) += gp8psk-fe.o obj-$(CONFIG_DVB_TC90522) += tc90522.o obj-$(CONFIG_DVB_HORUS3A) += horus3a.o obj-$(CONFIG_DVB_ASCOT2E) += ascot2e.o diff --git a/drivers/media/usb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb-frontends/gp8psk-fe.c similarity index 72% rename from drivers/media/usb/dvb-usb/gp8psk-fe.c rename to drivers/media/dvb-frontends/gp8psk-fe.c index db6eb79cde07..be19afeed7a9 100644 --- a/drivers/media/usb/dvb-usb/gp8psk-fe.c +++ b/drivers/media/dvb-frontends/gp8psk-fe.c @@ -14,11 +14,27 @@ * * see Documentation/dvb/README.dvb-usb for more information */ -#include "gp8psk.h" + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "gp8psk-fe.h" +#include "dvb_frontend.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + +#define dprintk(fmt, arg...) do { \ + if (debug) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), \ + __func__, ##arg); \ +} while (0) struct gp8psk_fe_state { struct dvb_frontend fe; - struct dvb_usb_device *d; + void *priv; + const struct gp8psk_fe_ops *ops; + bool is_rev1; u8 lock; u16 snr; unsigned long next_status_check; @@ -29,22 +45,24 @@ static int gp8psk_tuned_to_DCII(struct dvb_frontend *fe) { struct gp8psk_fe_state *st = fe->demodulator_priv; u8 status; - gp8psk_usb_in_op(st->d, GET_8PSK_CONFIG, 0, 0, &status, 1); + + st->ops->in(st->priv, GET_8PSK_CONFIG, 0, 0, &status, 1); return status & bmDCtuned; } static int gp8psk_set_tuner_mode(struct dvb_frontend *fe, int mode) { - struct gp8psk_fe_state *state = fe->demodulator_priv; - return gp8psk_usb_out_op(state->d, SET_8PSK_CONFIG, mode, 0, NULL, 0); + struct gp8psk_fe_state *st = fe->demodulator_priv; + + return st->ops->out(st->priv, SET_8PSK_CONFIG, mode, 0, NULL, 0); } static int gp8psk_fe_update_status(struct gp8psk_fe_state *st) { u8 buf[6]; if (time_after(jiffies,st->next_status_check)) { - gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0,0,&st->lock,1); - gp8psk_usb_in_op(st->d, GET_SIGNAL_STRENGTH, 0,0,buf,6); + st->ops->in(st->priv, GET_SIGNAL_LOCK, 0, 0, &st->lock, 1); + st->ops->in(st->priv, GET_SIGNAL_STRENGTH, 0, 0, buf, 6); st->snr = (buf[1]) << 8 | buf[0]; st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; } @@ -116,13 +134,12 @@ static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_front static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) { - struct gp8psk_fe_state *state = fe->demodulator_priv; + struct gp8psk_fe_state *st = fe->demodulator_priv; struct dtv_frontend_properties *c = &fe->dtv_property_cache; u8 cmd[10]; u32 freq = c->frequency * 1000; - int gp_product_id = le16_to_cpu(state->d->udev->descriptor.idProduct); - deb_fe("%s()\n", __func__); + dprintk("%s()\n", __func__); cmd[4] = freq & 0xff; cmd[5] = (freq >> 8) & 0xff; @@ -136,21 +153,21 @@ static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) switch (c->delivery_system) { case SYS_DVBS: if (c->modulation != QPSK) { - deb_fe("%s: unsupported modulation selected (%d)\n", + dprintk("%s: unsupported modulation selected (%d)\n", __func__, c->modulation); return -EOPNOTSUPP; } c->fec_inner = FEC_AUTO; break; case SYS_DVBS2: /* kept for backwards compatibility */ - deb_fe("%s: DVB-S2 delivery system selected\n", __func__); + dprintk("%s: DVB-S2 delivery system selected\n", __func__); break; case SYS_TURBO: - deb_fe("%s: Turbo-FEC delivery system selected\n", __func__); + dprintk("%s: Turbo-FEC delivery system selected\n", __func__); break; default: - deb_fe("%s: unsupported delivery system selected (%d)\n", + dprintk("%s: unsupported delivery system selected (%d)\n", __func__, c->delivery_system); return -EOPNOTSUPP; } @@ -161,9 +178,9 @@ static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) cmd[3] = (c->symbol_rate >> 24) & 0xff; switch (c->modulation) { case QPSK: - if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (st->is_rev1) if (gp8psk_tuned_to_DCII(fe)) - gp8psk_bcm4500_reload(state->d); + st->ops->reload(st->priv); switch (c->fec_inner) { case FEC_1_2: cmd[9] = 0; break; @@ -207,18 +224,18 @@ static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) cmd[9] = 0; break; default: /* Unknown modulation */ - deb_fe("%s: unsupported modulation selected (%d)\n", + dprintk("%s: unsupported modulation selected (%d)\n", __func__, c->modulation); return -EOPNOTSUPP; } - if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (st->is_rev1) gp8psk_set_tuner_mode(fe, 0); - gp8psk_usb_out_op(state->d, TUNE_8PSK, 0, 0, cmd, 10); + st->ops->out(st->priv, TUNE_8PSK, 0, 0, cmd, 10); - state->lock = 0; - state->next_status_check = jiffies; - state->status_check_interval = 200; + st->lock = 0; + st->next_status_check = jiffies; + st->status_check_interval = 200; return 0; } @@ -228,9 +245,9 @@ static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe, { struct gp8psk_fe_state *st = fe->demodulator_priv; - deb_fe("%s\n",__func__); + dprintk("%s\n", __func__); - if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0, + if (st->ops->out(st->priv, SEND_DISEQC_COMMAND, m->msg[0], 0, m->msg, m->msg_len)) { return -EINVAL; } @@ -243,12 +260,12 @@ static int gp8psk_fe_send_diseqc_burst(struct dvb_frontend *fe, struct gp8psk_fe_state *st = fe->demodulator_priv; u8 cmd; - deb_fe("%s\n",__func__); + dprintk("%s\n", __func__); /* These commands are certainly wrong */ cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01; - if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, cmd, 0, + if (st->ops->out(st->priv, SEND_DISEQC_COMMAND, cmd, 0, &cmd, 0)) { return -EINVAL; } @@ -258,10 +275,10 @@ static int gp8psk_fe_send_diseqc_burst(struct dvb_frontend *fe, static int gp8psk_fe_set_tone(struct dvb_frontend *fe, enum fe_sec_tone_mode tone) { - struct gp8psk_fe_state* state = fe->demodulator_priv; + struct gp8psk_fe_state *st = fe->demodulator_priv; - if (gp8psk_usb_out_op(state->d,SET_22KHZ_TONE, - (tone == SEC_TONE_ON), 0, NULL, 0)) { + if (st->ops->out(st->priv, SET_22KHZ_TONE, + (tone == SEC_TONE_ON), 0, NULL, 0)) { return -EINVAL; } return 0; @@ -270,9 +287,9 @@ static int gp8psk_fe_set_tone(struct dvb_frontend *fe, static int gp8psk_fe_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage voltage) { - struct gp8psk_fe_state* state = fe->demodulator_priv; + struct gp8psk_fe_state *st = fe->demodulator_priv; - if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, + if (st->ops->out(st->priv, SET_LNB_VOLTAGE, voltage == SEC_VOLTAGE_18, 0, NULL, 0)) { return -EINVAL; } @@ -281,52 +298,60 @@ static int gp8psk_fe_set_voltage(struct dvb_frontend *fe, static int gp8psk_fe_enable_high_lnb_voltage(struct dvb_frontend* fe, long onoff) { - struct gp8psk_fe_state* state = fe->demodulator_priv; - return gp8psk_usb_out_op(state->d, USE_EXTRA_VOLT, onoff, 0,NULL,0); + struct gp8psk_fe_state *st = fe->demodulator_priv; + + return st->ops->out(st->priv, USE_EXTRA_VOLT, onoff, 0, NULL, 0); } static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd) { - struct gp8psk_fe_state* state = fe->demodulator_priv; + struct gp8psk_fe_state *st = fe->demodulator_priv; u8 cmd = sw_cmd & 0x7f; - if (gp8psk_usb_out_op(state->d,SET_DN_SWITCH, cmd, 0, - NULL, 0)) { + if (st->ops->out(st->priv, SET_DN_SWITCH, cmd, 0, NULL, 0)) return -EINVAL; - } - if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, !!(sw_cmd & 0x80), - 0, NULL, 0)) { + + if (st->ops->out(st->priv, SET_LNB_VOLTAGE, !!(sw_cmd & 0x80), + 0, NULL, 0)) return -EINVAL; - } return 0; } static void gp8psk_fe_release(struct dvb_frontend* fe) { - struct gp8psk_fe_state *state = fe->demodulator_priv; - kfree(state); + struct gp8psk_fe_state *st = fe->demodulator_priv; + + kfree(st); } static struct dvb_frontend_ops gp8psk_fe_ops; -struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d) +struct dvb_frontend *gp8psk_fe_attach(const struct gp8psk_fe_ops *ops, + void *priv, bool is_rev1) { - struct gp8psk_fe_state *s = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL); - if (s == NULL) - goto error; + struct gp8psk_fe_state *st; - s->d = d; - memcpy(&s->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops)); - s->fe.demodulator_priv = s; + if (!ops || !ops->in || !ops->out || !ops->reload) { + pr_err("Error! gp8psk-fe ops not defined.\n"); + return NULL; + } - goto success; -error: - return NULL; -success: - return &s->fe; + st = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL); + if (!st) + return NULL; + + memcpy(&st->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops)); + st->fe.demodulator_priv = st; + st->ops = ops; + st->priv = priv; + st->is_rev1 = is_rev1; + + pr_info("Frontend %sattached\n", is_rev1 ? "revision 1 " : ""); + + return &st->fe; } - +EXPORT_SYMBOL_GPL(gp8psk_fe_attach); static struct dvb_frontend_ops gp8psk_fe_ops = { .delsys = { SYS_DVBS }, diff --git a/drivers/media/dvb-frontends/gp8psk-fe.h b/drivers/media/dvb-frontends/gp8psk-fe.h new file mode 100644 index 000000000000..6c7944b1ecd6 --- /dev/null +++ b/drivers/media/dvb-frontends/gp8psk-fe.h @@ -0,0 +1,82 @@ +/* + * gp8psk_fe driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef GP8PSK_FE_H +#define GP8PSK_FE_H + +#include + +/* gp8psk commands */ + +#define GET_8PSK_CONFIG 0x80 /* in */ +#define SET_8PSK_CONFIG 0x81 +#define I2C_WRITE 0x83 +#define I2C_READ 0x84 +#define ARM_TRANSFER 0x85 +#define TUNE_8PSK 0x86 +#define GET_SIGNAL_STRENGTH 0x87 /* in */ +#define LOAD_BCM4500 0x88 +#define BOOT_8PSK 0x89 /* in */ +#define START_INTERSIL 0x8A /* in */ +#define SET_LNB_VOLTAGE 0x8B +#define SET_22KHZ_TONE 0x8C +#define SEND_DISEQC_COMMAND 0x8D +#define SET_DVB_MODE 0x8E +#define SET_DN_SWITCH 0x8F +#define GET_SIGNAL_LOCK 0x90 /* in */ +#define GET_FW_VERS 0x92 +#define GET_SERIAL_NUMBER 0x93 /* in */ +#define USE_EXTRA_VOLT 0x94 +#define GET_FPGA_VERS 0x95 +#define CW3K_INIT 0x9d + +/* PSK_configuration bits */ +#define bm8pskStarted 0x01 +#define bm8pskFW_Loaded 0x02 +#define bmIntersilOn 0x04 +#define bmDVBmode 0x08 +#define bm22kHz 0x10 +#define bmSEL18V 0x20 +#define bmDCtuned 0x40 +#define bmArmed 0x80 + +/* Satellite modulation modes */ +#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ +#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */ +#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */ +#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */ + +#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */ +#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */ +#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */ +#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */ +#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */ +#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ + +/* firmware revision id's */ +#define GP8PSK_FW_REV1 0x020604 +#define GP8PSK_FW_REV2 0x020704 +#define GP8PSK_FW_VERS(_fw_vers) \ + ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0]) + +struct gp8psk_fe_ops { + int (*in)(void *priv, u8 req, u16 value, u16 index, u8 *b, int blen); + int (*out)(void *priv, u8 req, u16 value, u16 index, u8 *b, int blen); + int (*reload)(void *priv); +}; + +struct dvb_frontend *gp8psk_fe_attach(const struct gp8psk_fe_ops *ops, + void *priv, bool is_rev1); + +#endif diff --git a/drivers/media/usb/dvb-usb/Makefile b/drivers/media/usb/dvb-usb/Makefile index 2a7b5a963acf..3b3f32b426d1 100644 --- a/drivers/media/usb/dvb-usb/Makefile +++ b/drivers/media/usb/dvb-usb/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o dvb-usb-vp702x-objs := vp702x.o vp702x-fe.o obj-$(CONFIG_DVB_USB_VP702X) += dvb-usb-vp702x.o -dvb-usb-gp8psk-objs := gp8psk.o gp8psk-fe.o +dvb-usb-gp8psk-objs := gp8psk.o obj-$(CONFIG_DVB_USB_GP8PSK) += dvb-usb-gp8psk.o dvb-usb-dtt200u-objs := dtt200u.o dtt200u-fe.o diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index 2829e3082d15..993bb7a72985 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -15,6 +15,7 @@ * see Documentation/dvb/README.dvb-usb for more information */ #include "gp8psk.h" +#include "gp8psk-fe.h" /* debug */ static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw"; @@ -28,34 +29,8 @@ struct gp8psk_state { unsigned char data[80]; }; -static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers) -{ - return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6)); -} - -static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers) -{ - return (gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1)); -} - -static void gp8psk_info(struct dvb_usb_device *d) -{ - u8 fpga_vers, fw_vers[6]; - - if (!gp8psk_get_fw_version(d, fw_vers)) - info("FW Version = %i.%02i.%i (0x%x) Build %4i/%02i/%02i", - fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers), - 2000 + fw_vers[5], fw_vers[4], fw_vers[3]); - else - info("failed to get FW version"); - - if (!gp8psk_get_fpga_version(d, &fpga_vers)) - info("FPGA Version = %i", fpga_vers); - else - info("failed to get FPGA version"); -} - -int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) +static int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) { struct gp8psk_state *st = d->priv; int ret = 0,try = 0; @@ -93,7 +68,7 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 return ret; } -int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, +static int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) { struct gp8psk_state *st = d->priv; @@ -124,6 +99,34 @@ int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, return ret; } + +static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers) +{ + return gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6); +} + +static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers) +{ + return gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1); +} + +static void gp8psk_info(struct dvb_usb_device *d) +{ + u8 fpga_vers, fw_vers[6]; + + if (!gp8psk_get_fw_version(d, fw_vers)) + info("FW Version = %i.%02i.%i (0x%x) Build %4i/%02i/%02i", + fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers), + 2000 + fw_vers[5], fw_vers[4], fw_vers[3]); + else + info("failed to get FW version"); + + if (!gp8psk_get_fpga_version(d, &fpga_vers)) + info("FPGA Version = %i", fpga_vers); + else + info("failed to get FPGA version"); +} + static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) { int ret; @@ -226,10 +229,13 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) return 0; } -int gp8psk_bcm4500_reload(struct dvb_usb_device *d) +static int gp8psk_bcm4500_reload(struct dvb_usb_device *d) { u8 buf; int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct); + + deb_xfer("reloading firmware\n"); + /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; @@ -248,9 +254,47 @@ static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0); } +/* Callbacks for gp8psk-fe.c */ + +static int gp8psk_fe_in(void *priv, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + struct dvb_usb_device *d = priv; + + return gp8psk_usb_in_op(d, req, value, index, b, blen); +} + +static int gp8psk_fe_out(void *priv, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + struct dvb_usb_device *d = priv; + + return gp8psk_usb_out_op(d, req, value, index, b, blen); +} + +static int gp8psk_fe_reload(void *priv) +{ + struct dvb_usb_device *d = priv; + + return gp8psk_bcm4500_reload(d); +} + +const struct gp8psk_fe_ops gp8psk_fe_ops = { + .in = gp8psk_fe_in, + .out = gp8psk_fe_out, + .reload = gp8psk_fe_reload, +}; + static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap) { - adap->fe_adap[0].fe = gp8psk_fe_attach(adap->dev); + struct dvb_usb_device *d = adap->dev; + int id = le16_to_cpu(d->udev->descriptor.idProduct); + int is_rev1; + + is_rev1 = (id == USB_PID_GENPIX_8PSK_REV_1_WARM) ? true : false; + + adap->fe_adap[0].fe = dvb_attach(gp8psk_fe_attach, + &gp8psk_fe_ops, d, is_rev1); return 0; } diff --git a/drivers/media/usb/dvb-usb/gp8psk.h b/drivers/media/usb/dvb-usb/gp8psk.h index ed32b9da4843..d8975b866dee 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.h +++ b/drivers/media/usb/dvb-usb/gp8psk.h @@ -24,58 +24,6 @@ extern int dvb_usb_gp8psk_debug; #define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args) #define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args) #define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args) -#define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args) - -/* Twinhan Vendor requests */ -#define TH_COMMAND_IN 0xC0 -#define TH_COMMAND_OUT 0xC1 - -/* gp8psk commands */ - -#define GET_8PSK_CONFIG 0x80 /* in */ -#define SET_8PSK_CONFIG 0x81 -#define I2C_WRITE 0x83 -#define I2C_READ 0x84 -#define ARM_TRANSFER 0x85 -#define TUNE_8PSK 0x86 -#define GET_SIGNAL_STRENGTH 0x87 /* in */ -#define LOAD_BCM4500 0x88 -#define BOOT_8PSK 0x89 /* in */ -#define START_INTERSIL 0x8A /* in */ -#define SET_LNB_VOLTAGE 0x8B -#define SET_22KHZ_TONE 0x8C -#define SEND_DISEQC_COMMAND 0x8D -#define SET_DVB_MODE 0x8E -#define SET_DN_SWITCH 0x8F -#define GET_SIGNAL_LOCK 0x90 /* in */ -#define GET_FW_VERS 0x92 -#define GET_SERIAL_NUMBER 0x93 /* in */ -#define USE_EXTRA_VOLT 0x94 -#define GET_FPGA_VERS 0x95 -#define CW3K_INIT 0x9d - -/* PSK_configuration bits */ -#define bm8pskStarted 0x01 -#define bm8pskFW_Loaded 0x02 -#define bmIntersilOn 0x04 -#define bmDVBmode 0x08 -#define bm22kHz 0x10 -#define bmSEL18V 0x20 -#define bmDCtuned 0x40 -#define bmArmed 0x80 - -/* Satellite modulation modes */ -#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ -#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */ -#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */ -#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */ - -#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */ -#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */ -#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */ -#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */ -#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */ -#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ #define GET_USB_SPEED 0x07 @@ -86,15 +34,4 @@ extern int dvb_usb_gp8psk_debug; #define PRODUCT_STRING_READ 0x0D #define FW_BCD_VERSION_READ 0x14 -/* firmware revision id's */ -#define GP8PSK_FW_REV1 0x020604 -#define GP8PSK_FW_REV2 0x020704 -#define GP8PSK_FW_VERS(_fw_vers) ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0]) - -extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d); -extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); -extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, - u16 index, u8 *b, int blen); -extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d); - #endif From a25f0944ba9b1d8a6813fd6f1a86f1bd59ac25a6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 13 Nov 2016 10:32:32 -0800 Subject: [PATCH 213/224] Linux 4.9-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 06e2b73978e8..247430abfc73 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 9 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Psychotic Stoned Sheep # *DOCUMENTATION* From a6b5fac59cb216ac906f02300d3630c24520d9ef Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 4 Oct 2016 11:09:35 +0200 Subject: [PATCH 214/224] drm: re-export drm_dev_set_unique We still need it, for virtio-gpu for example. Partial revert of commit a742946a1ba57e24e8be205ea87224c05b38c380. Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/drm_drv.c | 38 ++++++++++++++++++++++++-------------- include/drm/drmP.h | 1 + 2 files changed, 25 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 6efdba4993fc..2ad617ed8709 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -313,9 +313,10 @@ void drm_minor_release(struct drm_minor *minor) * callbacks implemented by the driver. The driver then needs to initialize all * the various subsystems for the drm device like memory management, vblank * handling, modesetting support and intial output configuration plus obviously - * initialize all the corresponding hardware bits. Finally when everything is up - * and running and ready for userspace the device instance can be published - * using drm_dev_register(). + * initialize all the corresponding hardware bits. An important part of this is + * also calling drm_dev_set_unique() to set the userspace-visible unique name of + * this device instance. Finally when everything is up and running and ready for + * userspace the device instance can be published using drm_dev_register(). * * There is also deprecated support for initalizing device instances using * bus-specific helpers and the ->load() callback. But due to @@ -337,17 +338,6 @@ void drm_minor_release(struct drm_minor *minor) * dev_priv field of &drm_device. */ -static int drm_dev_set_unique(struct drm_device *dev, const char *name) -{ - if (!name) - return -EINVAL; - - kfree(dev->unique); - dev->unique = kstrdup(name, GFP_KERNEL); - - return dev->unique ? 0 : -ENOMEM; -} - /** * drm_put_dev - Unregister and release a DRM device * @dev: DRM device @@ -764,6 +754,26 @@ void drm_dev_unregister(struct drm_device *dev) } EXPORT_SYMBOL(drm_dev_unregister); +/** + * drm_dev_set_unique - Set the unique name of a DRM device + * @dev: device of which to set the unique name + * @name: unique name + * + * Sets the unique name of a DRM device using the specified string. Drivers + * can use this at driver probe time if the unique name of the devices they + * drive is static. + * + * Return: 0 on success or a negative error code on failure. + */ +int drm_dev_set_unique(struct drm_device *dev, const char *name) +{ + kfree(dev->unique); + dev->unique = kstrdup(name, GFP_KERNEL); + + return dev->unique ? 0 : -ENOMEM; +} +EXPORT_SYMBOL(drm_dev_set_unique); + /* * DRM Core * The DRM core module initializes all global DRM objects and makes them diff --git a/include/drm/drmP.h b/include/drm/drmP.h index 672644031bd5..c9df1934363c 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -1050,6 +1050,7 @@ void drm_dev_ref(struct drm_device *dev); void drm_dev_unref(struct drm_device *dev); int drm_dev_register(struct drm_device *dev, unsigned long flags); void drm_dev_unregister(struct drm_device *dev); +int drm_dev_set_unique(struct drm_device *dev, const char *name); struct drm_minor *drm_minor_acquire(unsigned int minor_id); void drm_minor_release(struct drm_minor *minor); From 9785b4321b0bd701f8d21d3d3c676a7739a5cf22 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 4 Oct 2016 11:19:08 +0200 Subject: [PATCH 215/224] drm/virtio: fix busid regression Created by commit a325725633c26aa66ab940f762a6b0778edf76c0. busid changes and userspace is upset. Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/virtio/virtgpu_drm_bus.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/virtio/virtgpu_drm_bus.c b/drivers/gpu/drm/virtio/virtgpu_drm_bus.c index 49e5996cb9f2..8534a99e1aea 100644 --- a/drivers/gpu/drm/virtio/virtgpu_drm_bus.c +++ b/drivers/gpu/drm/virtio/virtgpu_drm_bus.c @@ -71,13 +71,22 @@ int drm_virtio_init(struct drm_driver *driver, struct virtio_device *vdev) if (strcmp(vdev->dev.parent->bus->name, "pci") == 0) { struct pci_dev *pdev = to_pci_dev(vdev->dev.parent); + const char *pname = dev_name(&pdev->dev); bool vga = (pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA; + char unique[20]; - DRM_INFO("pci: %s detected\n", - vga ? "virtio-vga" : "virtio-gpu-pci"); + DRM_INFO("pci: %s detected at %s\n", + vga ? "virtio-vga" : "virtio-gpu-pci", + pname); dev->pdev = pdev; if (vga) virtio_pci_kick_out_firmware_fb(pdev); + + snprintf(unique, sizeof(unique), "pci:%s", pname); + ret = drm_dev_set_unique(dev, unique); + if (ret) + goto err_free; + } ret = drm_dev_register(dev, 0); From 1775db074a327d33af9536450635aedb6105b71a Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 18 Oct 2016 08:19:36 +0200 Subject: [PATCH 216/224] Revert "drm: virtio: reinstate drm_virtio_set_busid()" This reverts commit c2cbc38b9715bd8318062e600668fc30e5a3fbfa. Commit "drm/virtio: fix busid regression" is a better fix. --- drivers/gpu/drm/virtio/virtgpu_drm_bus.c | 10 ---------- drivers/gpu/drm/virtio/virtgpu_drv.c | 1 - drivers/gpu/drm/virtio/virtgpu_drv.h | 1 - 3 files changed, 12 deletions(-) diff --git a/drivers/gpu/drm/virtio/virtgpu_drm_bus.c b/drivers/gpu/drm/virtio/virtgpu_drm_bus.c index 8534a99e1aea..3b97d50fd392 100644 --- a/drivers/gpu/drm/virtio/virtgpu_drm_bus.c +++ b/drivers/gpu/drm/virtio/virtgpu_drm_bus.c @@ -28,16 +28,6 @@ #include "virtgpu_drv.h" -int drm_virtio_set_busid(struct drm_device *dev, struct drm_master *master) -{ - struct pci_dev *pdev = dev->pdev; - - if (pdev) { - return drm_pci_set_busid(dev, master); - } - return 0; -} - static void virtio_pci_kick_out_firmware_fb(struct pci_dev *pci_dev) { struct apertures_struct *ap; diff --git a/drivers/gpu/drm/virtio/virtgpu_drv.c b/drivers/gpu/drm/virtio/virtgpu_drv.c index 5820b7020ae5..c13f70cfc461 100644 --- a/drivers/gpu/drm/virtio/virtgpu_drv.c +++ b/drivers/gpu/drm/virtio/virtgpu_drv.c @@ -117,7 +117,6 @@ static const struct file_operations virtio_gpu_driver_fops = { static struct drm_driver driver = { .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_PRIME | DRIVER_RENDER | DRIVER_ATOMIC, - .set_busid = drm_virtio_set_busid, .load = virtio_gpu_driver_load, .unload = virtio_gpu_driver_unload, .open = virtio_gpu_driver_open, diff --git a/drivers/gpu/drm/virtio/virtgpu_drv.h b/drivers/gpu/drm/virtio/virtgpu_drv.h index ae59080d63d1..06ad9238044e 100644 --- a/drivers/gpu/drm/virtio/virtgpu_drv.h +++ b/drivers/gpu/drm/virtio/virtgpu_drv.h @@ -49,7 +49,6 @@ #define DRIVER_PATCHLEVEL 1 /* virtgpu_drm_bus.c */ -int drm_virtio_set_busid(struct drm_device *dev, struct drm_master *master); int drm_virtio_init(struct drm_driver *driver, struct virtio_device *vdev); struct virtio_gpu_object { From e4a76442efe137b52bd493698e8134ba49d592fa Mon Sep 17 00:00:00 2001 From: Christophe Fergeau Date: Tue, 8 Nov 2016 10:12:03 +0100 Subject: [PATCH 217/224] qxl: Mark some internal functions as static They are not used outside of their respective source file Signed-off-by: Christophe Fergeau Acked-by: Frediano Ziglio Message-id: 20161108091209.25568-2-cfergeau@redhat.com Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/qxl/qxl_cmd.c | 2 +- drivers/gpu/drm/qxl/qxl_display.c | 4 ++-- drivers/gpu/drm/qxl/qxl_drv.h | 3 --- 3 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/qxl/qxl_cmd.c b/drivers/gpu/drm/qxl/qxl_cmd.c index 04270f5d110c..74fc9362ecf9 100644 --- a/drivers/gpu/drm/qxl/qxl_cmd.c +++ b/drivers/gpu/drm/qxl/qxl_cmd.c @@ -578,7 +578,7 @@ int qxl_hw_surface_dealloc(struct qxl_device *qdev, return 0; } -int qxl_update_surface(struct qxl_device *qdev, struct qxl_bo *surf) +static int qxl_update_surface(struct qxl_device *qdev, struct qxl_bo *surf) { struct qxl_rect rect; int ret; diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c index a61c0d460ec2..156b7de5b73b 100644 --- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -36,7 +36,7 @@ static bool qxl_head_enabled(struct qxl_head *head) return head->width && head->height; } -void qxl_alloc_client_monitors_config(struct qxl_device *qdev, unsigned count) +static void qxl_alloc_client_monitors_config(struct qxl_device *qdev, unsigned count) { if (qdev->client_monitors_config && count > qdev->client_monitors_config->count) { @@ -607,7 +607,7 @@ static bool qxl_crtc_mode_fixup(struct drm_crtc *crtc, return true; } -void +static void qxl_send_monitors_config(struct qxl_device *qdev) { int i; diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h index 5f3e5ad99de7..da41e1f8b527 100644 --- a/drivers/gpu/drm/qxl/qxl_drv.h +++ b/drivers/gpu/drm/qxl/qxl_drv.h @@ -395,13 +395,11 @@ qxl_framebuffer_init(struct drm_device *dev, struct drm_gem_object *obj, const struct drm_framebuffer_funcs *funcs); void qxl_display_read_client_monitors_config(struct qxl_device *qdev); -void qxl_send_monitors_config(struct qxl_device *qdev); int qxl_create_monitors_object(struct qxl_device *qdev); int qxl_destroy_monitors_object(struct qxl_device *qdev); /* used by qxl_debugfs only */ void qxl_crtc_set_from_monitors_config(struct qxl_device *qdev); -void qxl_alloc_client_monitors_config(struct qxl_device *qdev, unsigned count); /* qxl_gem.c */ int qxl_gem_init(struct qxl_device *qdev); @@ -574,6 +572,5 @@ int qxl_bo_check_id(struct qxl_device *qdev, struct qxl_bo *bo); struct qxl_drv_surface * qxl_surface_lookup(struct drm_device *dev, int surface_id); void qxl_surface_evict(struct qxl_device *qdev, struct qxl_bo *surf, bool freeing); -int qxl_update_surface(struct qxl_device *qdev, struct qxl_bo *surf); #endif From 86c792aa22d6fc262f7533ca6cad373300ae4830 Mon Sep 17 00:00:00 2001 From: Christophe Fergeau Date: Tue, 8 Nov 2016 10:12:04 +0100 Subject: [PATCH 218/224] qxl: Remove unused prototype qxl_crtc_set_from_monitors_config() is defined in qxl_drv.h but never implemented. Signed-off-by: Christophe Fergeau Acked-by: Frediano Ziglio Message-id: 20161108091209.25568-3-cfergeau@redhat.com Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/qxl/qxl_drv.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h index da41e1f8b527..590ba25862f4 100644 --- a/drivers/gpu/drm/qxl/qxl_drv.h +++ b/drivers/gpu/drm/qxl/qxl_drv.h @@ -398,9 +398,6 @@ void qxl_display_read_client_monitors_config(struct qxl_device *qdev); int qxl_create_monitors_object(struct qxl_device *qdev); int qxl_destroy_monitors_object(struct qxl_device *qdev); -/* used by qxl_debugfs only */ -void qxl_crtc_set_from_monitors_config(struct qxl_device *qdev); - /* qxl_gem.c */ int qxl_gem_init(struct qxl_device *qdev); void qxl_gem_fini(struct qxl_device *qdev); From 00d7d642702240ac14fb37bb0f95ce4e12879f40 Mon Sep 17 00:00:00 2001 From: Christophe Fergeau Date: Tue, 8 Nov 2016 10:12:05 +0100 Subject: [PATCH 219/224] qxl: Add missing '\n' to qxl_io_log() call The message has to be terminated by a newline as it's not going to get added automatically. Signed-off-by: Christophe Fergeau Acked-by: Frediano Ziglio Message-id: 20161108091209.25568-4-cfergeau@redhat.com Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/qxl/qxl_fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/qxl/qxl_fb.c b/drivers/gpu/drm/qxl/qxl_fb.c index 2cd879a4ae15..0d16107f1909 100644 --- a/drivers/gpu/drm/qxl/qxl_fb.c +++ b/drivers/gpu/drm/qxl/qxl_fb.c @@ -197,7 +197,7 @@ static int qxlfb_framebuffer_dirty(struct drm_framebuffer *fb, /* * we are using a shadow draw buffer, at qdev->surface0_shadow */ - qxl_io_log(qdev, "dirty x[%d, %d], y[%d, %d]", clips->x1, clips->x2, + qxl_io_log(qdev, "dirty x[%d, %d], y[%d, %d]\n", clips->x1, clips->x2, clips->y1, clips->y2); image->dx = clips->x1; image->dy = clips->y1; From b3740e88601d698706f79514cb24ad0b8e415034 Mon Sep 17 00:00:00 2001 From: Christophe Fergeau Date: Tue, 8 Nov 2016 10:12:06 +0100 Subject: [PATCH 220/224] qxl: Call qxl_gem_{init, fini} qdev->gem.objects was initialized directly in qxl_device_init() rather than going through qxl_gem_init(), and qxl_gem_fini() was never called. Signed-off-by: Christophe Fergeau Message-id: 20161108091209.25568-5-cfergeau@redhat.com Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/qxl/qxl_kms.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c index e642242728c0..af685f1d91f8 100644 --- a/drivers/gpu/drm/qxl/qxl_kms.c +++ b/drivers/gpu/drm/qxl/qxl_kms.c @@ -131,7 +131,7 @@ static int qxl_device_init(struct qxl_device *qdev, mutex_init(&qdev->update_area_mutex); mutex_init(&qdev->release_mutex); mutex_init(&qdev->surf_evict_mutex); - INIT_LIST_HEAD(&qdev->gem.objects); + qxl_gem_init(qdev); qdev->rom_base = pci_resource_start(pdev, 2); qdev->rom_size = pci_resource_len(pdev, 2); @@ -273,6 +273,7 @@ static void qxl_device_fini(struct qxl_device *qdev) qxl_ring_free(qdev->command_ring); qxl_ring_free(qdev->cursor_ring); qxl_ring_free(qdev->release_ring); + qxl_gem_fini(qdev); qxl_bo_fini(qdev); io_mapping_free(qdev->surface_mapping); io_mapping_free(qdev->vram_mapping); From ae4b9a09234ec77832406bdb767015ebd82cf22f Mon Sep 17 00:00:00 2001 From: Christophe Fergeau Date: Tue, 8 Nov 2016 10:12:07 +0100 Subject: [PATCH 221/224] qxl: Remove qxl_bo_init() return value It's always returning 0, and it's always ignored. Signed-off-by: Christophe Fergeau Acked-by: Frediano Ziglio Message-id: 20161108091209.25568-6-cfergeau@redhat.com Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/qxl/qxl_drv.h | 2 +- drivers/gpu/drm/qxl/qxl_gem.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/qxl/qxl_drv.h b/drivers/gpu/drm/qxl/qxl_drv.h index 590ba25862f4..707680601c47 100644 --- a/drivers/gpu/drm/qxl/qxl_drv.h +++ b/drivers/gpu/drm/qxl/qxl_drv.h @@ -399,7 +399,7 @@ int qxl_create_monitors_object(struct qxl_device *qdev); int qxl_destroy_monitors_object(struct qxl_device *qdev); /* qxl_gem.c */ -int qxl_gem_init(struct qxl_device *qdev); +void qxl_gem_init(struct qxl_device *qdev); void qxl_gem_fini(struct qxl_device *qdev); int qxl_gem_object_create(struct qxl_device *qdev, int size, int alignment, int initial_domain, diff --git a/drivers/gpu/drm/qxl/qxl_gem.c b/drivers/gpu/drm/qxl/qxl_gem.c index d9746e904ef1..3f185c4da5b7 100644 --- a/drivers/gpu/drm/qxl/qxl_gem.c +++ b/drivers/gpu/drm/qxl/qxl_gem.c @@ -111,10 +111,9 @@ void qxl_gem_object_close(struct drm_gem_object *obj, { } -int qxl_gem_init(struct qxl_device *qdev) +void qxl_gem_init(struct qxl_device *qdev) { INIT_LIST_HEAD(&qdev->gem.objects); - return 0; } void qxl_gem_fini(struct qxl_device *qdev) From 9e3b317839298abc0ab796a691f8449a16792398 Mon Sep 17 00:00:00 2001 From: Christophe Fergeau Date: Tue, 8 Nov 2016 10:12:08 +0100 Subject: [PATCH 222/224] qxl: Don't notify userspace when monitors config is unchanged When the QXL driver receives a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt, we currently always notify userspace that there was some hotplug event. However, gnome-shell/mutter is reacting to this event by attempting a resolution change, which it does by issueing drmModeRmFB, drmModeAddFB, and then drmModeSetCrtc. This has the side-effect of causing qxl_crtc_mode_set() to tell the QXL virtual hardware that a primary surface was destroyed and created. After going through QEMU and then the remote SPICE client, a new identical monitors config message will be sent, resulting in a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt to be emitted, and the same scenario occurring again. As destroying/creating the primary surface causes a visible screen flicker, this makes the guest hard to use ( https://bugzilla.redhat.com/show_bug.cgi?id=1266484 ). This commit checks if the screen configuration we received is the same one as the current one, and does not notify userspace about it if that's the case. Signed-off-by: Christophe Fergeau Acked-by: Frediano Ziglio Message-id: 20161108091209.25568-7-cfergeau@redhat.com Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/qxl/qxl_display.c | 62 ++++++++++++++++++++++++++----- 1 file changed, 52 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c index 156b7de5b73b..eaea0d87cc94 100644 --- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -57,11 +57,18 @@ static void qxl_alloc_client_monitors_config(struct qxl_device *qdev, unsigned c qdev->client_monitors_config->count = count; } +enum { + MONITORS_CONFIG_MODIFIED, + MONITORS_CONFIG_UNCHANGED, + MONITORS_CONFIG_BAD_CRC, +}; + static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev) { int i; int num_monitors; uint32_t crc; + int status = MONITORS_CONFIG_UNCHANGED; num_monitors = qdev->rom->client_monitors_config.count; crc = crc32(0, (const uint8_t *)&qdev->rom->client_monitors_config, @@ -70,7 +77,7 @@ static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev) qxl_io_log(qdev, "crc mismatch: have %X (%zd) != %X\n", crc, sizeof(qdev->rom->client_monitors_config), qdev->rom->client_monitors_config_crc); - return 1; + return MONITORS_CONFIG_BAD_CRC; } if (num_monitors > qdev->monitors_config->max_allowed) { DRM_DEBUG_KMS("client monitors list will be truncated: %d < %d\n", @@ -79,6 +86,10 @@ static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev) } else { num_monitors = qdev->rom->client_monitors_config.count; } + if (qdev->client_monitors_config + && (num_monitors != qdev->client_monitors_config->count)) { + status = MONITORS_CONFIG_MODIFIED; + } qxl_alloc_client_monitors_config(qdev, num_monitors); /* we copy max from the client but it isn't used */ qdev->client_monitors_config->max_allowed = @@ -88,17 +99,39 @@ static int qxl_display_copy_rom_client_monitors_config(struct qxl_device *qdev) &qdev->rom->client_monitors_config.heads[i]; struct qxl_head *client_head = &qdev->client_monitors_config->heads[i]; - client_head->x = c_rect->left; - client_head->y = c_rect->top; - client_head->width = c_rect->right - c_rect->left; - client_head->height = c_rect->bottom - c_rect->top; - client_head->surface_id = 0; - client_head->id = i; - client_head->flags = 0; + if (client_head->x != c_rect->left) { + client_head->x = c_rect->left; + status = MONITORS_CONFIG_MODIFIED; + } + if (client_head->y != c_rect->top) { + client_head->y = c_rect->top; + status = MONITORS_CONFIG_MODIFIED; + } + if (client_head->width != c_rect->right - c_rect->left) { + client_head->width = c_rect->right - c_rect->left; + status = MONITORS_CONFIG_MODIFIED; + } + if (client_head->height != c_rect->bottom - c_rect->top) { + client_head->height = c_rect->bottom - c_rect->top; + status = MONITORS_CONFIG_MODIFIED; + } + if (client_head->surface_id != 0) { + client_head->surface_id = 0; + status = MONITORS_CONFIG_MODIFIED; + } + if (client_head->id != i) { + client_head->id = i; + status = MONITORS_CONFIG_MODIFIED; + } + if (client_head->flags != 0) { + client_head->flags = 0; + status = MONITORS_CONFIG_MODIFIED; + } DRM_DEBUG_KMS("read %dx%d+%d+%d\n", client_head->width, client_head->height, client_head->x, client_head->y); } - return 0; + + return status; } static void qxl_update_offset_props(struct qxl_device *qdev) @@ -124,9 +157,18 @@ void qxl_display_read_client_monitors_config(struct qxl_device *qdev) { struct drm_device *dev = qdev->ddev; - while (qxl_display_copy_rom_client_monitors_config(qdev)) { + int status; + + status = qxl_display_copy_rom_client_monitors_config(qdev); + while (status == MONITORS_CONFIG_BAD_CRC) { qxl_io_log(qdev, "failed crc check for client_monitors_config," " retrying\n"); + status = qxl_display_copy_rom_client_monitors_config(qdev); + } + if (status == MONITORS_CONFIG_UNCHANGED) { + qxl_io_log(qdev, "config unchanged\n"); + DRM_DEBUG("ignoring unchanged client monitors config"); + return; } drm_modeset_lock_all(dev); From ff996e72a0a1503005b76d0869a46b3a712f327a Mon Sep 17 00:00:00 2001 From: Christophe Fergeau Date: Tue, 8 Nov 2016 10:12:09 +0100 Subject: [PATCH 223/224] qxl: Allow resolution which are not multiple of 8 The use of drm_cvt_mode() in qxl_add_monitors_config_modes() means that the resolutions we are going to present to user-space are going to be rounded down to a multiple of 8. In the QXL arbitrary resolution case, this is not useful. This commit forces the actual width/height that was requested by the client in the drm_display_mode structure rather than keeping the rounded version. Signed-off-by: Christophe Fergeau Message-id: 20161108091209.25568-8-cfergeau@redhat.com Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/qxl/qxl_display.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/qxl/qxl_display.c b/drivers/gpu/drm/qxl/qxl_display.c index eaea0d87cc94..4b5eab8a47b3 100644 --- a/drivers/gpu/drm/qxl/qxl_display.c +++ b/drivers/gpu/drm/qxl/qxl_display.c @@ -199,6 +199,9 @@ static int qxl_add_monitors_config_modes(struct drm_connector *connector, mode = drm_cvt_mode(dev, head->width, head->height, 60, false, false, false); mode->type |= DRM_MODE_TYPE_PREFERRED; + mode->hdisplay = head->width; + mode->vdisplay = head->height; + drm_mode_set_name(mode); *pwidth = head->width; *pheight = head->height; drm_mode_probed_add(connector, mode); From 348a4b6dd77d183ef4ea67673ecf30a09ae3f9d7 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 15 Nov 2016 09:46:48 +0100 Subject: [PATCH 224/224] drm/virtio: allocate some extra bufs virtio-gpu guest driver appearently can run out of buffers. allocate some extra buffers, as quick stopgap for 4.9. analyzing root cause and fixing it properly is TBD. Reported-by: Jiri Slaby Tested-by: Jiri Slaby Signed-off-by: Gerd Hoffmann --- drivers/gpu/drm/virtio/virtgpu_vq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/virtio/virtgpu_vq.c b/drivers/gpu/drm/virtio/virtgpu_vq.c index 5a0f8a745b9d..974f9410474b 100644 --- a/drivers/gpu/drm/virtio/virtgpu_vq.c +++ b/drivers/gpu/drm/virtio/virtgpu_vq.c @@ -75,7 +75,7 @@ void virtio_gpu_cursor_ack(struct virtqueue *vq) int virtio_gpu_alloc_vbufs(struct virtio_gpu_device *vgdev) { struct virtio_gpu_vbuffer *vbuf; - int i, size, count = 0; + int i, size, count = 16; void *ptr; INIT_LIST_HEAD(&vgdev->free_vbufs);