Merge branch 'hyp-boot-mode-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable

Documentation/arm/Booting

@@ -154,13 +154,33 @@ In either case, the following conditions must be met:
 
 - CPU mode
   All forms of interrupts must be disabled (IRQs and FIQs)
-  The CPU must be in SVC mode.  (A special exception exists for Angel)
+
+  For CPUs which do not include the ARM virtualization extensions, the
+  CPU must be in SVC mode.  (A special exception exists for Angel)
+
+  CPUs which include support for the virtualization extensions can be
+  entered in HYP mode in order to enable the kernel to make full use of
+  these extensions.  This is the recommended boot method for such CPUs,
+  unless the virtualisations are already in use by a pre-installed
+  hypervisor.
+
+  If the kernel is not entered in HYP mode for any reason, it must be
+  entered in SVC mode.
 
 - Caches, MMUs
   The MMU must be off.
   Instruction cache may be on or off.
   Data cache must be off.
 
+  If the kernel is entered in HYP mode, the above requirements apply to
+  the HYP mode configuration in addition to the ordinary PL1 (privileged
+  kernel modes) configuration.  In addition, all traps into the
+  hypervisor must be disabled, and PL1 access must be granted for all
+  peripherals and CPU resources for which this is architecturally
+  possible.  Except for entering in HYP mode, the system configuration
+  should be such that a kernel which does not include support for the
+  virtualization extensions can boot correctly without extra help.
+
 - The boot loader is expected to call the kernel image by jumping
   directly to the first instruction of the kernel image.
 

arch/arm/boot/compressed/.gitignore

@@ -1,6 +1,7 @@
 ashldi3.S
 font.c
 lib1funcs.S
+hyp-stub.S
 piggy.gzip
 piggy.lzo
 piggy.lzma

arch/arm/boot/compressed/Makefile

@@ -30,6 +30,10 @@ FONTC	= $(srctree)/drivers/video/console/font_acorn_8x8.c
 OBJS		+= string.o
 CFLAGS_string.o	:= -Os
 
+ifeq ($(CONFIG_ARM_VIRT_EXT),y)
+OBJS		+= hyp-stub.o
+endif
+
 #
 # Architecture dependencies
 #
@@ -126,7 +130,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
 ccflags-y := -fpic -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all
+asflags-y := -Wa,-march=all -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
@@ -198,3 +202,6 @@ $(obj)/font.c: $(FONTC)
 
 $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
 	@sed "$(SEDFLAGS)" < $< > $@
+
+$(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
+	$(call cmd,shipped)

arch/arm/boot/compressed/head.S

@@ -9,6 +9,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/linkage.h>
+#include <asm/assembler.h>
 
 /*
  * Debugging stuff
@@ -132,7 +133,12 @@ start:
 		.word	start			@ absolute load/run zImage address
 		.word	_edata			@ zImage end address
  THUMB(		.thumb			)
-1:		mov	r7, r1			@ save architecture ID
+1:
+		mrs	r9, cpsr
+#ifdef CONFIG_ARM_VIRT_EXT
+		bl	__hyp_stub_install	@ get into SVC mode, reversibly
+#endif
+		mov	r7, r1			@ save architecture ID
 		mov	r8, r2			@ save atags pointer
 
 #ifndef __ARM_ARCH_2__
@@ -148,9 +154,9 @@ start:
  ARM(		swi	0x123456	)	@ angel_SWI_ARM
  THUMB(		svc	0xab		)	@ angel_SWI_THUMB
 not_angel:
-		mrs	r2, cpsr		@ turn off interrupts to
+		safe_svcmode_maskall r0
-		orr	r2, r2, #0xc0		@ prevent angel from running
+		msr	spsr_cxsf, r9		@ Save the CPU boot mode in
-		msr	cpsr_c, r2
+						@ SPSR
 #else
 		teqp	pc, #0x0c000003		@ turn off interrupts
 #endif
@@ -350,6 +356,20 @@ dtb_check_done:
 		adr	r5, restart
 		bic	r5, r5, #31
 
+/* Relocate the hyp vector base if necessary */
+#ifdef CONFIG_ARM_VIRT_EXT
+		mrs	r0, spsr
+		and	r0, r0, #MODE_MASK
+		cmp	r0, #HYP_MODE
+		bne	1f
+
+		bl	__hyp_get_vectors
+		sub	r0, r0, r5
+		add	r0, r0, r10
+		bl	__hyp_set_vectors
+1:
+#endif
+
 		sub	r9, r6, r5		@ size to copy
 		add	r9, r9, #31		@ rounded up to a multiple
 		bic	r9, r9, #31		@ ... of 32 bytes
@@ -458,11 +478,29 @@ not_relocated:	mov	r0, #0
 		bl	decompress_kernel
 		bl	cache_clean_flush
 		bl	cache_off
-		mov	r0, #0			@ must be zero
 		mov	r1, r7			@ restore architecture number
 		mov	r2, r8			@ restore atags pointer
- ARM(		mov	pc, r4	)		@ call kernel
+
- THUMB(		bx	r4	)		@ entry point is always ARM
+#ifdef CONFIG_ARM_VIRT_EXT
+		mrs	r0, spsr		@ Get saved CPU boot mode
+		and	r0, r0, #MODE_MASK
+		cmp	r0, #HYP_MODE		@ if not booted in HYP mode...
+		bne	__enter_kernel		@ boot kernel directly
+
+		adr	r12, .L__hyp_reentry_vectors_offset
+		ldr	r0, [r12]
+		add	r0, r0, r12
+
+		bl	__hyp_set_vectors
+		__HVC(0)			@ otherwise bounce to hyp mode
+
+		b	.			@ should never be reached
+
+		.align	2
+.L__hyp_reentry_vectors_offset:	.long	__hyp_reentry_vectors - .
+#else
+		b	__enter_kernel
+#endif
 
 		.align	2
 		.type	LC0, #object
@@ -1196,6 +1234,25 @@ memdump:	mov	r12, r0
 #endif
 
 		.ltorg
+
+#ifdef CONFIG_ARM_VIRT_EXT
+.align 5
+__hyp_reentry_vectors:
+		W(b)	.			@ reset
+		W(b)	.			@ undef
+		W(b)	.			@ svc
+		W(b)	.			@ pabort
+		W(b)	.			@ dabort
+		W(b)	__enter_kernel		@ hyp
+		W(b)	.			@ irq
+		W(b)	.			@ fiq
+#endif /* CONFIG_ARM_VIRT_EXT */
+
+__enter_kernel:
+		mov	r0, #0			@ must be 0
+ ARM(		mov	pc, r4	)		@ call kernel
+ THUMB(		bx	r4	)		@ entry point is always ARM
+
 reloc_code_end:
 
 		.align

arch/arm/include/asm/assembler.h

@@ -22,6 +22,7 @@
 
 #include <asm/ptrace.h>
 #include <asm/domain.h>
+#include <asm/opcodes-virt.h>
 
 #define IOMEM(x)	(x)
 
@@ -239,6 +240,33 @@
 	.endm
 #endif
 
+/*
+ * Helper macro to enter SVC mode cleanly and mask interrupts. reg is
+ * a scratch register for the macro to overwrite.
+ *
+ * This macro is intended for forcing the CPU into SVC mode at boot time.
+ * you cannot return to the original mode.
+ *
+ * Beware, it also clobers LR.
+ */
+.macro safe_svcmode_maskall reg:req
+	mrs	\reg , cpsr
+	mov	lr , \reg
+	and	lr , lr , #MODE_MASK
+	cmp	lr , #HYP_MODE
+	orr	\reg , \reg , #PSR_A_BIT | PSR_I_BIT | PSR_F_BIT
+	bic	\reg , \reg , #MODE_MASK
+	orr	\reg , \reg , #SVC_MODE
+THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
+	msr	spsr_cxsf, \reg
+	adr	lr, BSYM(2f)
+	bne	1f
+	__MSR_ELR_HYP(14)
+	__ERET
+1:	movs	pc, lr
+2:
+.endm
+
 /*
  * STRT/LDRT access macros with ARM and Thumb-2 variants
  */

arch/arm/include/asm/opcodes-virt.h

@@ -0,0 +1,39 @@
+/*
+ * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions
+ * Copyright (C) 2012  Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __ASM_ARM_OPCODES_VIRT_H
+#define __ASM_ARM_OPCODES_VIRT_H
+
+#include <asm/opcodes.h>
+
+#define __HVC(imm16) __inst_arm_thumb32(				\
+	0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F),	\
+	0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF)	\
+)
+
+#define __ERET	__inst_arm_thumb32(					\
+	0xE160006E,							\
+	0xF3DE8F00							\
+)
+
+#define __MSR_ELR_HYP(regnum)	__inst_arm_thumb32(			\
+	0xE12EF300 | regnum,						\
+	0xF3808E30 | (regnum << 16)					\
+)
+
+#endif /* ! __ASM_ARM_OPCODES_VIRT_H */

arch/arm/include/asm/opcodes.h

@@ -18,6 +18,33 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
 #define ARM_OPCODE_CONDTEST_UNCOND 2
 
 
+/*
+ * Assembler opcode byteswap helpers.
+ * These are only intended for use by this header: don't use them directly,
+ * because they will be suboptimal in most cases.
+ */
+#define ___asm_opcode_swab32(x) (	\
+	  (((x) << 24) & 0xFF000000)	\
+	| (((x) <<  8) & 0x00FF0000)	\
+	| (((x) >>  8) & 0x0000FF00)	\
+	| (((x) >> 24) & 0x000000FF)	\
+)
+#define ___asm_opcode_swab16(x) (	\
+	  (((x) << 8) & 0xFF00)		\
+	| (((x) >> 8) & 0x00FF)		\
+)
+#define ___asm_opcode_swahb32(x) (	\
+	  (((x) << 8) & 0xFF00FF00)	\
+	| (((x) >> 8) & 0x00FF00FF)	\
+)
+#define ___asm_opcode_swahw32(x) (	\
+	  (((x) << 16) & 0xFFFF0000)	\
+	| (((x) >> 16) & 0x0000FFFF)	\
+)
+#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
+#define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
+
+
 /*
  * Opcode byteswap helpers
  *
@@ -41,39 +68,163 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
  * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
  * represent any valid Thumb-2 instruction.  For this range,
  * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
+ *
+ * The ___asm variants are intended only for use by this header, in situations
+ * involving inline assembler.  For .S files, the normal __opcode_*() macros
+ * should do the right thing.
  */
+#ifdef __ASSEMBLY__
 
-#ifndef __ASSEMBLY__
+#define ___opcode_swab32(x) ___asm_opcode_swab32(x)
+#define ___opcode_swab16(x) ___asm_opcode_swab16(x)
+#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x)
+#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x)
+#define ___opcode_identity32(x) ___asm_opcode_identity32(x)
+#define ___opcode_identity16(x) ___asm_opcode_identity16(x)
+
+#else /* ! __ASSEMBLY__ */
 
 #include <linux/types.h>
 #include <linux/swab.h>
 
+#define ___opcode_swab32(x) swab32(x)
+#define ___opcode_swab16(x) swab16(x)
+#define ___opcode_swahb32(x) swahb32(x)
+#define ___opcode_swahw32(x) swahw32(x)
+#define ___opcode_identity32(x) ((u32)(x))
+#define ___opcode_identity16(x) ((u16)(x))
+
+#endif /* ! __ASSEMBLY__ */
+
+
 #ifdef CONFIG_CPU_ENDIAN_BE8
-#define __opcode_to_mem_arm(x) swab32(x)
+
-#define __opcode_to_mem_thumb16(x) swab16(x)
+#define __opcode_to_mem_arm(x) ___opcode_swab32(x)
-#define __opcode_to_mem_thumb32(x) swahb32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x)
-#else
+#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x)
-#define __opcode_to_mem_arm(x) ((u32)(x))
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x)
-#define __opcode_to_mem_thumb16(x) ((u16)(x))
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x)
-#define __opcode_to_mem_thumb32(x) swahw32(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x)
+
+#else /* ! CONFIG_CPU_ENDIAN_BE8 */
+
+#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
+#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
+#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
+#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
+/*
+ * On BE32 systems, using 32-bit accesses to store Thumb instructions will not
+ * work in all cases, due to alignment constraints.  For now, a correct
+ * version is not provided for BE32.
+ */
+#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
+#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
 #endif
 
+#endif /* ! CONFIG_CPU_ENDIAN_BE8 */
+
 #define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
 #define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
+#ifndef CONFIG_CPU_ENDIAN_BE32
 #define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
+#endif
 
 /* Operations specific to Thumb opcodes */
 
 /* Instruction size checks: */
-#define __opcode_is_thumb32(x) ((u32)(x) >= 0xE8000000UL)
+#define __opcode_is_thumb32(x) (		\
-#define __opcode_is_thumb16(x) ((u32)(x) < 0xE800UL)
+	   ((x) & 0xF8000000) == 0xE8000000	\
+	|| ((x) & 0xF0000000) == 0xF0000000	\
+)
+#define __opcode_is_thumb16(x) (					\
+	   ((x) & 0xFFFF0000) == 0					\
+	&& !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000)	\
+)
 
 /* Operations to construct or split 32-bit Thumb instructions: */
-#define __opcode_thumb32_first(x) ((u16)((x) >> 16))
+#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16))
-#define __opcode_thumb32_second(x) ((u16)(x))
+#define __opcode_thumb32_second(x) (___opcode_identity16(x))
-#define __opcode_thumb32_compose(first, second) \
+#define __opcode_thumb32_compose(first, second) (			\
-	(((u32)(u16)(first) << 16) | (u32)(u16)(second))
+	  (___opcode_identity32(___opcode_identity16(first)) << 16)	\
+	| ___opcode_identity32(___opcode_identity16(second))		\
+)
+#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16))
+#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x))
+#define ___asm_opcode_thumb32_compose(first, second) (			    \
+	  (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \
+	| ___asm_opcode_identity32(___asm_opcode_identity16(second))	    \
+)
 
-#endif /* __ASSEMBLY__ */
+/*
+ * Opcode injection helpers
+ *
+ * In rare cases it is necessary to assemble an opcode which the
+ * assembler does not support directly, or which would normally be
+ * rejected because of the CFLAGS or AFLAGS used to build the affected
+ * file.
+ *
+ * Before using these macros, consider carefully whether it is feasible
+ * instead to change the build flags for your file, or whether it really
+ * makes sense to support old assembler versions when building that
+ * particular kernel feature.
+ *
+ * The macros defined here should only be used where there is no viable
+ * alternative.
+ *
+ *
+ * __inst_arm(x): emit the specified ARM opcode
+ * __inst_thumb16(x): emit the specified 16-bit Thumb opcode
+ * __inst_thumb32(x): emit the specified 32-bit Thumb opcode
+ *
+ * __inst_arm_thumb16(arm, thumb): emit either the specified arm or
+ *	16-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ *	kernel is being built
+ *
+ * __inst_arm_thumb32(arm, thumb): emit either the specified arm or
+ *	32-bit Thumb opcode, depending on whether an ARM or Thumb-2
+ *	kernel is being built
+ *
+ *
+ * Note that using these macros directly is poor practice.  Instead, you
+ * should use them to define human-readable wrapper macros to encode the
+ * instructions that you care about.  In code which might run on ARMv7 or
+ * above, you can usually use the __inst_arm_thumb{16,32} macros to
+ * specify the ARM and Thumb alternatives at the same time.  This ensures
+ * that the correct opcode gets emitted depending on the instruction set
+ * used for the kernel build.
+ *
+ * Look at opcodes-virt.h for an example of how to use these macros.
+ */
+#include <linux/stringify.h>
+
+#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
+#define __inst_thumb32(x) ___inst_thumb32(				\
+	___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)),	\
+	___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x))	\
+)
+#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x))
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \
+	__inst_thumb16(thumb_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \
+	__inst_thumb32(thumb_opcode)
+#else
+#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
+#endif
+
+/* Helpers for the helpers.  Don't use these directly. */
+#ifdef __ASSEMBLY__
+#define ___inst_arm(x) .long x
+#define ___inst_thumb16(x) .short x
+#define ___inst_thumb32(first, second) .short first, second
+#else
+#define ___inst_arm(x) ".long " __stringify(x) "\n\t"
+#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t"
+#define ___inst_thumb32(first, second) \
+	".short " __stringify(first) ", " __stringify(second) "\n\t"
+#endif
 
 #endif /* __ASM_ARM_OPCODES_H */

arch/arm/include/asm/ptrace.h

@@ -44,6 +44,7 @@
 #define IRQ_MODE	0x00000012
 #define SVC_MODE	0x00000013
 #define ABT_MODE	0x00000017
+#define HYP_MODE	0x0000001a
 #define UND_MODE	0x0000001b
 #define SYSTEM_MODE	0x0000001f
 #define MODE32_BIT	0x00000010

arch/arm/include/asm/virt.h

@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2012 Linaro Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef VIRT_H
+#define VIRT_H
+
+#include <asm/ptrace.h>
+
+/*
+ * Flag indicating that the kernel was not entered in the same mode on every
+ * CPU.  The zImage loader stashes this value in an SPSR, so we need an
+ * architecturally defined flag bit here (the N flag, as it happens)
+ */
+#define BOOT_CPU_MODE_MISMATCH (1<<31)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_ARM_VIRT_EXT
+/*
+ * __boot_cpu_mode records what mode the primary CPU was booted in.
+ * A correctly-implemented bootloader must start all CPUs in the same mode:
+ * if it fails to do this, the flag BOOT_CPU_MODE_MISMATCH is set to indicate
+ * that some CPU(s) were booted in a different mode.
+ *
+ * This allows the kernel to flag an error when the secondaries have come up.
+ */
+extern int __boot_cpu_mode;
+
+void __hyp_set_vectors(unsigned long phys_vector_base);
+unsigned long __hyp_get_vectors(void);
+#else
+#define __boot_cpu_mode	(SVC_MODE)
+#endif
+
+#ifndef ZIMAGE
+void hyp_mode_check(void);
+
+/* Reports the availability of HYP mode */
+static inline bool is_hyp_mode_available(void)
+{
+	return ((__boot_cpu_mode & MODE_MASK) == HYP_MODE &&
+		!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH));
+}
+
+/* Check if the bootloader has booted CPUs in different modes */
+static inline bool is_hyp_mode_mismatched(void)
+{
+	return !!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH);
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* ! VIRT_H */

arch/arm/kernel/Makefile

@@ -82,4 +82,6 @@ head-y			:= head$(MMUEXT).o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
+obj-$(CONFIG_ARM_VIRT_EXT)	+= hyp-stub.o
+
 extra-y := $(head-y) vmlinux.lds

arch/arm/kernel/head.S

@@ -83,8 +83,12 @@ ENTRY(stext)
  THUMB(	.thumb			)	@ switch to Thumb now.
  THUMB(1:			)
 
-	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
+#ifdef CONFIG_ARM_VIRT_EXT
-						@ and irqs disabled
+	bl	__hyp_stub_install
+#endif
+	@ ensure svc mode and all interrupts masked
+	safe_svcmode_maskall r9
+
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor (r5=0)?
@@ -326,7 +330,11 @@ ENTRY(secondary_startup)
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
-	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
+#ifdef CONFIG_ARM_VIRT_EXT
+	bl	__hyp_stub_install
+#endif
+	safe_svcmode_maskall r9
+
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type
 	movs	r10, r5				@ invalid processor?

arch/arm/kernel/hyp-stub.S

@@ -0,0 +1,223 @@
+/*
+ * Copyright (c) 2012 Linaro Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/virt.h>
+
+#ifndef ZIMAGE
+/*
+ * For the kernel proper, we need to find out the CPU boot mode long after
+ * boot, so we need to store it in a writable variable.
+ *
+ * This is not in .bss, because we set it sufficiently early that the boot-time
+ * zeroing of .bss would clobber it.
+ */
+.data
+ENTRY(__boot_cpu_mode)
+	.long	0
+.text
+
+	/*
+	 * Save the primary CPU boot mode. Requires 3 scratch registers.
+	 */
+	.macro	store_primary_cpu_mode	reg1, reg2, reg3
+	mrs	\reg1, cpsr
+	and	\reg1, \reg1, #MODE_MASK
+	adr	\reg2, .L__boot_cpu_mode_offset
+	ldr	\reg3, [\reg2]
+	str	\reg1, [\reg2, \reg3]
+	.endm
+
+	/*
+	 * Compare the current mode with the one saved on the primary CPU.
+	 * If they don't match, record that fact. The Z bit indicates
+	 * if there's a match or not.
+	 * Requires 3 additionnal scratch registers.
+	 */
+	.macro	compare_cpu_mode_with_primary mode, reg1, reg2, reg3
+	adr	\reg2, .L__boot_cpu_mode_offset
+	ldr	\reg3, [\reg2]
+	ldr	\reg1, [\reg2, \reg3]
+	cmp	\mode, \reg1		@ matches primary CPU boot mode?
+	orrne	r7, r7, #BOOT_CPU_MODE_MISMATCH
+	strne	r7, [r5, r6]		@ record what happened and give up
+	.endm
+
+#else	/* ZIMAGE */
+
+	.macro	store_primary_cpu_mode	reg1:req, reg2:req, reg3:req
+	.endm
+
+/*
+ * The zImage loader only runs on one CPU, so we don't bother with mult-CPU
+ * consistency checking:
+ */
+	.macro	compare_cpu_mode_with_primary mode, reg1, reg2, reg3
+	cmp	\mode, \mode
+	.endm
+
+#endif /* ZIMAGE */
+
+/*
+ * Hypervisor stub installation functions.
+ *
+ * These must be called with the MMU and D-cache off.
+ * They are not ABI compliant and are only intended to be called from the kernel
+ * entry points in head.S.
+ */
+@ Call this from the primary CPU
+ENTRY(__hyp_stub_install)
+	store_primary_cpu_mode	r4, r5, r6
+ENDPROC(__hyp_stub_install)
+
+	@ fall through...
+
+@ Secondary CPUs should call here
+ENTRY(__hyp_stub_install_secondary)
+	mrs	r4, cpsr
+	and	r4, r4, #MODE_MASK
+
+	/*
+	 * If the secondary has booted with a different mode, give up
+	 * immediately.
+	 */
+	compare_cpu_mode_with_primary	r4, r5, r6, r7
+	bxne	lr
+
+	/*
+	 * Once we have given up on one CPU, we do not try to install the
+	 * stub hypervisor on the remaining ones: because the saved boot mode
+	 * is modified, it can't compare equal to the CPSR mode field any
+	 * more.
+	 *
+	 * Otherwise...
+	 */
+
+	cmp	r4, #HYP_MODE
+	bxne	lr			@ give up if the CPU is not in HYP mode
+
+/*
+ * Configure HSCTLR to set correct exception endianness/instruction set
+ * state etc.
+ * Turn off all traps
+ * Eventually, CPU-specific code might be needed -- assume not for now
+ *
+ * This code relies on the "eret" instruction to synchronize the
+ * various coprocessor accesses.
+ */
+	@ Now install the hypervisor stub:
+	adr	r7, __hyp_stub_vectors
+	mcr	p15, 4, r7, c12, c0, 0	@ set hypervisor vector base (HVBAR)
+
+	@ Disable all traps, so we don't get any nasty surprise
+	mov	r7, #0
+	mcr	p15, 4, r7, c1, c1, 0	@ HCR
+	mcr	p15, 4, r7, c1, c1, 2	@ HCPTR
+	mcr	p15, 4, r7, c1, c1, 3	@ HSTR
+
+THUMB(	orr	r7, #(1 << 30)	)	@ HSCTLR.TE
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	orr	r7, #(1 << 9)		@ HSCTLR.EE
+#endif
+	mcr	p15, 4, r7, c1, c0, 0	@ HSCTLR
+
+	mrc	p15, 4, r7, c1, c1, 1	@ HDCR
+	and	r7, #0x1f		@ Preserve HPMN
+	mcr	p15, 4, r7, c1, c1, 1	@ HDCR
+
+#if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
+	@ make CNTP_* and CNTPCT accessible from PL1
+	mrc	p15, 0, r7, c0, c1, 1	@ ID_PFR1
+	lsr	r7, #16
+	and	r7, #0xf
+	cmp	r7, #1
+	bne	1f
+	mrc	p15, 4, r7, c14, c1, 0	@ CNTHCTL
+	orr	r7, r7, #3		@ PL1PCEN | PL1PCTEN
+	mcr	p15, 4, r7, c14, c1, 0	@ CNTHCTL
+1:
+#endif
+
+	bic	r7, r4, #MODE_MASK
+	orr	r7, r7, #SVC_MODE
+THUMB(	orr	r7, r7, #PSR_T_BIT	)
+	msr	spsr_cxsf, r7		@ This is SPSR_hyp.
+
+	__MSR_ELR_HYP(14)		@ msr elr_hyp, lr
+	__ERET				@ return, switching to SVC mode
+					@ The boot CPU mode is left in r4.
+ENDPROC(__hyp_stub_install_secondary)
+
+__hyp_stub_do_trap:
+	cmp	r0, #-1
+	mrceq	p15, 4, r0, c12, c0, 0	@ get HVBAR
+	mcrne	p15, 4, r0, c12, c0, 0	@ set HVBAR
+	__ERET
+ENDPROC(__hyp_stub_do_trap)
+
+/*
+ * __hyp_set_vectors: Call this after boot to set the initial hypervisor
+ * vectors as part of hypervisor installation.  On an SMP system, this should
+ * be called on each CPU.
+ *
+ * r0 must be the physical address of the new vector table (which must lie in
+ * the bottom 4GB of physical address space.
+ *
+ * r0 must be 32-byte aligned.
+ *
+ * Before calling this, you must check that the stub hypervisor is installed
+ * everywhere, by waiting for any secondary CPUs to be brought up and then
+ * checking that BOOT_CPU_MODE_HAVE_HYP(__boot_cpu_mode) is true.
+ *
+ * If not, there is a pre-existing hypervisor, some CPUs failed to boot, or
+ * something else went wrong... in such cases, trying to install a new
+ * hypervisor is unlikely to work as desired.
+ *
+ * When you call into your shiny new hypervisor, sp_hyp will contain junk,
+ * so you will need to set that to something sensible at the new hypervisor's
+ * initialisation entry point.
+ */
+ENTRY(__hyp_get_vectors)
+	mov	r0, #-1
+ENDPROC(__hyp_get_vectors)
+	@ fall through
+ENTRY(__hyp_set_vectors)
+	__HVC(0)
+	bx	lr
+ENDPROC(__hyp_set_vectors)
+
+#ifndef ZIMAGE
+.align 2
+.L__boot_cpu_mode_offset:
+	.long	__boot_cpu_mode - .
+#endif
+
+.align 5
+__hyp_stub_vectors:
+__hyp_stub_reset:	W(b)	.
+__hyp_stub_und:		W(b)	.
+__hyp_stub_svc:		W(b)	.
+__hyp_stub_pabort:	W(b)	.
+__hyp_stub_dabort:	W(b)	.
+__hyp_stub_trap:	W(b)	__hyp_stub_do_trap
+__hyp_stub_irq:		W(b)	.
+__hyp_stub_fiq:		W(b)	.
+ENDPROC(__hyp_stub_vectors)
+

arch/arm/kernel/setup.c

@@ -55,6 +55,7 @@
 #include <asm/traps.h>
 #include <asm/unwind.h>
 #include <asm/memblock.h>
+#include <asm/virt.h>
 
 #if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
 #include "compat.h"
@@ -937,6 +938,21 @@ static int __init meminfo_cmp(const void *_a, const void *_b)
 	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
 }
 
+void __init hyp_mode_check(void)
+{
+#ifdef CONFIG_ARM_VIRT_EXT
+	if (is_hyp_mode_available()) {
+		pr_info("CPU: All CPU(s) started in HYP mode.\n");
+		pr_info("CPU: Virtualization extensions available.\n");
+	} else if (is_hyp_mode_mismatched()) {
+		pr_warn("CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x%x)\n",
+			__boot_cpu_mode & MODE_MASK);
+		pr_warn("CPU: This may indicate a broken bootloader or firmware.\n");
+	} else
+		pr_info("CPU: All CPU(s) started in SVC mode.\n");
+#endif
+}
+
 void __init setup_arch(char **cmdline_p)
 {
 	struct machine_desc *mdesc;
@@ -980,6 +996,10 @@ void __init setup_arch(char **cmdline_p)
 	if (is_smp())
 		smp_init_cpus();
 #endif
+
+	if (!is_smp())
+		hyp_mode_check();
+
 	reserve_crashkernel();
 
 	tcm_init();

arch/arm/kernel/smp.c

@@ -42,6 +42,7 @@
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
 #include <asm/smp_plat.h>
+#include <asm/virt.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -290,6 +291,8 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	       num_online_cpus(),
 	       bogosum / (500000/HZ),
 	       (bogosum / (5000/HZ)) % 100);
+
+	hyp_mode_check();
 }
 
 void __init smp_prepare_boot_cpu(void)

arch/arm/mm/Kconfig

@@ -624,6 +624,23 @@ config ARM_THUMBEE
 	  Say Y here if you have a CPU with the ThumbEE extension and code to
 	  make use of it. Say N for code that can run on CPUs without ThumbEE.
 
+config ARM_VIRT_EXT
+	bool "Native support for the ARM Virtualization Extensions"
+	depends on MMU && CPU_V7
+	help
+	  Enable the kernel to make use of the ARM Virtualization
+	  Extensions to install hypervisors without run-time firmware
+	  assistance.
+
+	  A compliant bootloader is required in order to make maximum
+	  use of this feature.  Refer to Documentation/arm/Booting for
+	  details.
+
+	  It is safe to enable this option even if the kernel may not be
+	  booted in HYP mode, may not have support for the
+	  virtualization extensions, or may be booted with a
+	  non-compliant bootloader.
+
 config SWP_EMULATE
 	bool "Emulate SWP/SWPB instructions"
 	depends on !CPU_USE_DOMAINS && CPU_V7