Merge 835d31d319 ("Merge tag 'media/v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media") into android-mainline

Steps on the way to 5.15-rc1

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: If6d4fd429292ea554534d7ae86147343207a2622

Documentation/devicetree/bindings/media/amlogic,meson-ir-tx.yaml

@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/amlogic,meson-ir-tx.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson IR transmitter
+
+maintainers:
+  - Viktor Prutyanov <viktor.prutyanov@phystech.edu>
+
+description: |
+  Some Amlogic SoCs such as A311D and T950D4 have IR transmitter
+  (also called blaster) controller onboard. It is capable of
+  sending IR signals with arbitrary carrier frequency and duty cycle.
+
+properties:
+  compatible:
+    oneOf:
+      - const: amlogic,meson-ir-tx
+      - items:
+          - const: amlogic,meson-g12a-ir-tx
+          - const: amlogic,meson-ir-tx
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: sysclk
+      - const: xtal
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/g12a-clkc.h>
+
+    ir@ff80014c {
+      compatible = "amlogic,meson-g12a-ir-tx", "amlogic,meson-ir-tx";
+      reg = <0xff80014c 0x10>;
+      interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
+      clocks = <&clkc CLKID_CLK81>, <&xtal>;
+      clock-names = "sysclk", "xtal";
+    };

Documentation/devicetree/bindings/media/i2c/adv7180.yaml

@@ -35,6 +35,14 @@ properties:
   powerdown-gpios:
     maxItems: 1
 
+  reset-gpios:
+    maxItems: 1
+
+  adv,force-bt656-4:
+    description:
+      Indicates that the output is a BT.656-4 compatible stream.
+    type: boolean
+
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
     unevaluatedProperties: false

Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml

@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov9282.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV9282 Sensor
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  OV9282 sensor is an OmniVision black & white CMOS active pixel digital image
+  sensor with an active array size of 1296H x 816V. It is programmable through
+  I2C interface. The I2C client address is fixed to 0x60/0x70 as per sensor data
+  sheet. Image data is sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    const: ovti,ov9282
+  reg:
+    description: I2C address
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description: Clock frequency from 6 to 27MHz
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XCLR pin, if any.
+    maxItems: 1
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/properties/port
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@60 {
+            compatible = "ovti,ov9282";
+            reg = <0x60>;
+            clocks = <&ov9282_clk>;
+
+            assigned-clocks = <&ov9282_clk>;
+            assigned-clock-parents = <&ov9282_clk_parent>;
+            assigned-clock-rates = <24000000>;
+
+            port {
+                ov9282: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2>;
+                    link-frequencies = /bits/ 64 <800000000>;
+                };
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml

@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx335.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX335 Sensor
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  IMX335 sensor is a Sony CMOS active pixel digital image sensor with an active
+  array size of 2592H x 1944V. It is programmable through I2C interface. The
+  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+  sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    const: sony,imx335
+  reg:
+    description: I2C address
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description: Clock frequency from 6 to 27 MHz, 37.125MHz, 74.25MHz
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XCLR pin, if any.
+    maxItems: 1
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/properties/port
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@1a {
+            compatible = "sony,imx335";
+            reg = <0x1a>;
+            clocks = <&imx335_clk>;
+
+            assigned-clocks = <&imx335_clk>;
+            assigned-clock-parents = <&imx335_clk_parent>;
+            assigned-clock-rates = <24000000>;
+
+            port {
+                imx335: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <594000000>;
+                };
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml

@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2021 Intel Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx412.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX412 Sensor
+
+maintainers:
+  - Paul J. Murphy <paul.j.murphy@intel.com>
+  - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+description:
+  IMX412 sensor is a Sony CMOS active pixel digital image sensor with an active
+  array size of 4072H x 3176V. It is programmable through I2C interface. The
+  I2C client address is fixed to 0x1a as per sensor data sheet. Image data is
+  sent through MIPI CSI-2.
+
+properties:
+  compatible:
+    const: sony,imx412
+  reg:
+    description: I2C address
+    maxItems: 1
+
+  assigned-clocks: true
+  assigned-clock-parents: true
+  assigned-clock-rates: true
+
+  clocks:
+    description: Clock frequency 6MHz, 12MHz, 18MHz, 24MHz or 27MHz
+    maxItems: 1
+
+  reset-gpios:
+    description: Reference to the GPIO connected to the XCLR pin, if any.
+    maxItems: 1
+
+  port:
+    additionalProperties: false
+    $ref: /schemas/graph.yaml#/properties/port
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes: true
+          link-frequencies: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+
+    required:
+      - endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@1a {
+            compatible = "sony,imx412";
+            reg = <0x1a>;
+            clocks = <&imx412_clk>;
+
+            assigned-clocks = <&imx412_clk>;
+            assigned-clock-parents = <&imx412_clk_parent>;
+            assigned-clock-rates = <24000000>;
+
+            port {
+                imx412: endpoint {
+                    remote-endpoint = <&cam>;
+                    data-lanes = <1 2 3 4>;
+                    link-frequencies = /bits/ 64 <600000000>;
+                };
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/media/nxp,imx7-csi.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/media/nxp,imx7-csi.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: i.MX7 CMOS Sensor Interface
+title: i.MX7 and i.MX8 CSI bridge (CMOS Sensor Interface)
 
 maintainers:
   - Rui Miguel Silva <rmfrfs@gmail.com>
@@ -15,9 +15,13 @@ description: |
 
 properties:
   compatible:
-    enum:
-      - fsl,imx7-csi
-      - fsl,imx6ul-csi
+    oneOf:
+      - enum:
+          - fsl,imx7-csi
+          - fsl,imx6ul-csi
+      - items:
+          - const: fsl,imx8mm-csi
+          - const: fsl,imx7-csi
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/media/nxp,imx8mq-mipi-csi2.yaml

@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/nxp,imx8mq-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8MQ MIPI CSI-2 receiver
+
+maintainers:
+  - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+  This binding covers the CSI-2 RX PHY and host controller included in the
+  NXP i.MX8MQ SoC. It handles the sensor/image input and process for all the
+  input imaging devices.
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-mipi-csi2
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: core is the RX Controller Core Clock input. This clock
+                     must be exactly equal to or faster than the receive
+                     byteclock from the RX DPHY.
+      - description: esc is the Rx Escape Clock. This must be the same escape
+                     clock that the RX DPHY receives.
+      - description: ui is the pixel clock (phy_ref up to 333Mhz).
+                     See the reference manual for details.
+
+  clock-names:
+    items:
+      - const: core
+      - const: esc
+      - const: ui
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: CORE_RESET reset register bit definition
+      - description: PHY_REF_RESET reset register bit definition
+      - description: ESC_RESET reset register bit definition
+
+  fsl,mipi-phy-gpr:
+    description: |
+      The phandle to the imx8mq syscon iomux-gpr with the register
+      for setting RX_ENABLE for the mipi receiver.
+
+      The format should be as follows:
+      <gpr req_gpr>
+      gpr is the phandle to general purpose register node.
+      req_gpr is the gpr register offset of RX_ENABLE for the mipi phy.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: The 'gpr' is the phandle to general purpose register node.
+        - description: The 'req_gpr' is the gpr register offset containing
+                       CSI2_1_RX_ENABLE or CSI2_2_RX_ENABLE respectively.
+          maximum: 0xff
+
+  interconnects:
+    maxItems: 1
+
+  interconnect-names:
+    const: dram
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description:
+          Input port node, single endpoint describing the CSI-2 transmitter.
+
+        properties:
+          endpoint:
+            $ref: video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                items:
+                  minItems: 1
+                  maxItems: 4
+                  items:
+                    - const: 1
+                    - const: 2
+                    - const: 3
+                    - const: 4
+
+            required:
+              - data-lanes
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output port node
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - power-domains
+  - resets
+  - fsl,mipi-phy-gpr
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8mq-clock.h>
+    #include <dt-bindings/interconnect/imx8mq.h>
+    #include <dt-bindings/reset/imx8mq-reset.h>
+
+    csi@30a70000 {
+        compatible = "fsl,imx8mq-mipi-csi2";
+        reg = <0x30a70000 0x1000>;
+        clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                 <&clk IMX8MQ_CLK_CSI1_ESC>,
+                 <&clk IMX8MQ_CLK_CSI1_PHY_REF>;
+        clock-names = "core", "esc", "ui";
+        assigned-clocks = <&clk IMX8MQ_CLK_CSI1_CORE>,
+                          <&clk IMX8MQ_CLK_CSI1_PHY_REF>,
+                          <&clk IMX8MQ_CLK_CSI1_ESC>;
+        assigned-clock-rates = <266000000>, <200000000>, <66000000>;
+        assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_266M>,
+                                 <&clk IMX8MQ_SYS2_PLL_1000M>,
+                                 <&clk IMX8MQ_SYS1_PLL_800M>;
+        power-domains = <&pgc_mipi_csi1>;
+        resets = <&src IMX8MQ_RESET_MIPI_CSI1_CORE_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET>,
+                 <&src IMX8MQ_RESET_MIPI_CSI1_ESC_RESET>;
+        fsl,mipi-phy-gpr = <&iomuxc_gpr 0x88>;
+        interconnects = <&noc IMX8MQ_ICM_CSI1 &noc IMX8MQ_ICS_DRAM>;
+        interconnect-names = "dram";
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+
+                imx8mm_mipi_csi_in: endpoint {
+                    remote-endpoint = <&imx477_out>;
+                    data-lanes = <1 2 3 4>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+
+                imx8mm_mipi_csi_out: endpoint {
+                    remote-endpoint = <&csi_in>;
+                };
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/media/rockchip-vpu.yaml

@@ -22,6 +22,7 @@ properties:
           - rockchip,rk3288-vpu
           - rockchip,rk3328-vpu
           - rockchip,rk3399-vpu
+          - rockchip,px30-vpu
       - items:
           - const: rockchip,rk3188-vpu
           - const: rockchip,rk3066-vpu

Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt

@@ -6,6 +6,7 @@ Required properties:
 	"ti,da830-mcasp-audio"	: for both DA830 & DA850 platforms
 	"ti,am33xx-mcasp-audio"	: for AM33xx platforms (AM33xx, AM43xx, TI81xx)
 	"ti,dra7-mcasp-audio"	: for DRA7xx platforms
+	"ti,omap4-mcasp-audio"	: for OMAP4
 
 - reg : Should contain reg specifiers for the entries in the reg-names property.
 - reg-names : Should contain:

Documentation/devicetree/bindings/sound/ics43432.txt

@@ -1,4 +1,4 @@
-Invensense ICS-43432 MEMS microphone with I2S output.
+Invensense ICS-43432-compatible MEMS microphone with I2S output.
 
 There are no software configuration options for this device, indeed, the only
 host connection is the I2S interface. Apart from requirements on clock
@@ -8,7 +8,9 @@ contain audio data. A hardware pin determines if the device outputs data
 on the left or right channel of the I2S frame.
 
 Required properties:
-  - compatible : Must be "invensense,ics43432"
+  - compatible: should be one of the following.
+     "invensense,ics43432": For the Invensense ICS43432
+     "cui,cmm-4030d-261": For the CUI CMM-4030D-261-I2S-TR
 
 Example:
 

Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml

@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8195-afe-pcm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek AFE PCM controller for mt8195
+
+maintainers:
+  - Trevor Wu <trevor.wu@mediatek.com>
+
+properties:
+  compatible:
+    const: mediatek,mt8195-audio
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  mediatek,topckgen:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of the mediatek topckgen controller
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: 26M clock
+      - description: audio pll1 clock
+      - description: audio pll2 clock
+      - description: clock divider for i2si1_mck
+      - description: clock divider for i2si2_mck
+      - description: clock divider for i2so1_mck
+      - description: clock divider for i2so2_mck
+      - description: clock divider for dptx_mck
+      - description: a1sys hoping clock
+      - description: audio intbus clock
+      - description: audio hires clock
+      - description: audio local bus clock
+      - description: mux for dptx_mck
+      - description: mux for i2so1_mck
+      - description: mux for i2so2_mck
+      - description: mux for i2si1_mck
+      - description: mux for i2si2_mck
+      - description: audio infra 26M clock
+      - description: infra bus clock
+
+  clock-names:
+    items:
+      - const: clk26m
+      - const: apll1_ck
+      - const: apll2_ck
+      - const: apll12_div0
+      - const: apll12_div1
+      - const: apll12_div2
+      - const: apll12_div3
+      - const: apll12_div9
+      - const: a1sys_hp_sel
+      - const: aud_intbus_sel
+      - const: audio_h_sel
+      - const: audio_local_bus_sel
+      - const: dptx_m_sel
+      - const: i2so1_m_sel
+      - const: i2so2_m_sel
+      - const: i2si1_m_sel
+      - const: i2si2_m_sel
+      - const: infra_ao_audio_26m_b
+      - const: scp_adsp_audiodsp
+
+  mediatek,etdm-in1-chn-disabled:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 24
+    description: Specify which input channel should be disabled.
+
+  mediatek,etdm-in2-chn-disabled:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 16
+    description: Specify which input channel should be disabled.
+
+patternProperties:
+  "^mediatek,etdm-in[1-2]-mclk-always-on-rate-hz$":
+    description: Specify etdm in mclk output rate for always on case.
+
+  "^mediatek,etdm-out[1-3]-mclk-always-on-rate-hz$":
+    description: Specify etdm out mclk output rate for always on case.
+
+  "^mediatek,etdm-in[1-2]-multi-pin-mode$":
+    type: boolean
+    description: if present, the etdm data mode is I2S.
+
+  "^mediatek,etdm-out[1-3]-multi-pin-mode$":
+    type: boolean
+    description: if present, the etdm data mode is I2S.
+
+  "^mediatek,etdm-in[1-2]-cowork-source$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm in moudule.
+    enum:
+      - 0 # etdm1_in
+      - 1 # etdm2_in
+      - 2 # etdm1_out
+      - 3 # etdm2_out
+
+  "^mediatek,etdm-out[1-2]-cowork-source$":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      etdm modules can share the same external clock pin. Specify
+      which etdm clock source is required by this etdm out moudule.
+    enum:
+      - 0 # etdm1_in
+      - 1 # etdm2_in
+      - 2 # etdm1_out
+      - 3 # etdm2_out
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - mediatek,topckgen
+  - power-domains
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8195-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/power/mt8195-power.h>
+
+    afe: mt8195-afe-pcm@10890000 {
+        compatible = "mediatek,mt8195-audio";
+        reg = <0x10890000 0x10000>;
+        interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
+        mediatek,topckgen = <&topckgen>;
+        power-domains = <&spm MT8195_POWER_DOMAIN_AUDIO>;
+        clocks = <&clk26m>,
+                 <&topckgen CLK_TOP_APLL1>,
+                 <&topckgen CLK_TOP_APLL2>,
+                 <&topckgen CLK_TOP_APLL12_DIV0>,
+                 <&topckgen CLK_TOP_APLL12_DIV1>,
+                 <&topckgen CLK_TOP_APLL12_DIV2>,
+                 <&topckgen CLK_TOP_APLL12_DIV3>,
+                 <&topckgen CLK_TOP_APLL12_DIV9>,
+                 <&topckgen CLK_TOP_A1SYS_HP_SEL>,
+                 <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+                 <&topckgen CLK_TOP_AUDIO_H_SEL>,
+                 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS_SEL>,
+                 <&topckgen CLK_TOP_DPTX_M_SEL>,
+                 <&topckgen CLK_TOP_I2SO1_M_SEL>,
+                 <&topckgen CLK_TOP_I2SO2_M_SEL>,
+                 <&topckgen CLK_TOP_I2SI1_M_SEL>,
+                 <&topckgen CLK_TOP_I2SI2_M_SEL>,
+                 <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>,
+                 <&scp_adsp CLK_SCP_ADSP_AUDIODSP>;
+        clock-names = "clk26m",
+                      "apll1_ck",
+                      "apll2_ck",
+                      "apll12_div0",
+                      "apll12_div1",
+                      "apll12_div2",
+                      "apll12_div3",
+                      "apll12_div9",
+                      "a1sys_hp_sel",
+                      "aud_intbus_sel",
+                      "audio_h_sel",
+                      "audio_local_bus_sel",
+                      "dptx_m_sel",
+                      "i2so1_m_sel",
+                      "i2so2_m_sel",
+                      "i2si1_m_sel",
+                      "i2si2_m_sel",
+                      "infra_ao_audio_26m_b",
+                      "scp_adsp_audiodsp";
+    };
+
+...

Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/mt8195-mt6359-rt1019-rt5682.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8195 with MT6359, RT1019 and RT5682 ASoC sound card driver
+
+maintainers:
+  - Trevor Wu <trevor.wu@mediatek.com>
+
+description:
+  This binding describes the MT8195 sound card.
+
+properties:
+  compatible:
+    const: mediatek,mt8195_mt6359_rt1019_rt5682
+
+  mediatek,platform:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 ASoC platform.
+
+  mediatek,dptx-codec:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 Display Port Tx codec node.
+
+  mediatek,hdmi-codec:
+    $ref: "/schemas/types.yaml#/definitions/phandle"
+    description: The phandle of MT8195 HDMI codec node.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - mediatek,platform
+
+examples:
+  - |
+
+    sound: mt8195-sound {
+        compatible = "mediatek,mt8195_mt6359_rt1019_rt5682";
+        mediatek,platform = <&afe>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&aud_pins_default>;
+    };
+
+...

Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml

@@ -15,7 +15,9 @@ description: |
 
 properties:
   compatible:
-    const: realtek,rt1015p
+    enum:
+      - realtek,rt1015p
+      - realtek,rt1019p
 
   sdb-gpios:
     description:

Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml

@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,rz-ssi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L ASoC Sound Serial Interface (SSIF-2)
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-ssi  # RZ/G2{L,LC}
+      - const: renesas,rz-ssi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: int_req
+      - const: dma_rx
+      - const: dma_tx
+      - const: dma_rt
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: ssi
+      - const: ssi_sfr
+      - const: audio_clk1
+      - const: audio_clk2
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    minItems: 1
+    maxItems: 2
+    description:
+      The first cell represents a phandle to dmac
+      The second cell specifies the encoded MID/RID values of the SSI port
+      connected to the DMA client and the slave channel configuration
+      parameters.
+      bits[0:9]   - Specifies MID/RID value of a SSI channel as below
+                    MID/RID value of SSI rx0 = 0x256
+                    MID/RID value of SSI tx0 = 0x255
+                    MID/RID value of SSI rx1 = 0x25a
+                    MID/RID value of SSI tx1 = 0x259
+                    MID/RID value of SSI rt2 = 0x25f
+                    MID/RID value of SSI rx3 = 0x262
+                    MID/RID value of SSI tx3 = 0x261
+      bit[10]     - HIEN = 1, Detects a request in response to the rising edge
+                    of the signal
+      bit[11]     - LVL = 0, Detects based on the edge
+      bits[12:14] - AM = 2, Bus cycle mode
+      bit[15]     - TM = 0, Single transfer mode
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+      - items:
+          - const: rt
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - '#sound-dai-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    ssi0: ssi@10049c00 {
+        compatible = "renesas,r9a07g044-ssi",
+                     "renesas,rz-ssi";
+            reg = <0x10049c00 0x400>;
+            interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
+                         <GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
+            clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
+                     <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
+                     <&audio_clk1>,
+                     <&audio_clk2>;
+            clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
+            power-domains = <&cpg>;
+            resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
+            dmas = <&dmac 0x2655>,
+                   <&dmac 0x2656>;
+            dma-names = "tx", "rx";
+            #sound-dai-cells = <0>;
+    };

Documentation/devicetree/bindings/sound/rockchip-i2s.yaml

@@ -20,7 +20,9 @@ properties:
       - items:
           - enum:
               - rockchip,px30-i2s
+              - rockchip,rk1808-i2s
               - rockchip,rk3036-i2s
+              - rockchip,rk3128-i2s
               - rockchip,rk3188-i2s
               - rockchip,rk3228-i2s
               - rockchip,rk3288-i2s
@@ -29,6 +31,7 @@ properties:
               - rockchip,rk3366-i2s
               - rockchip,rk3368-i2s
               - rockchip,rk3399-i2s
+              - rockchip,rv1126-i2s
           - const: rockchip,rk3066-i2s
 
   reg:
@@ -61,6 +64,14 @@ properties:
   power-domains:
     maxItems: 1
 
+  reset-names:
+    items:
+      - const: reset-m
+      - const: reset-h
+
+  resets:
+    maxItems: 2
+
   rockchip,capture-channels:
     $ref: /schemas/types.yaml#/definitions/uint32
     default: 2

Documentation/devicetree/bindings/sound/rockchip-spdif.yaml

@@ -23,6 +23,7 @@ properties:
       - const: rockchip,rk3366-spdif
       - const: rockchip,rk3368-spdif
       - const: rockchip,rk3399-spdif
+      - const: rockchip,rk3568-spdif
       - items:
           - enum:
               - rockchip,rk3188-spdif

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -271,6 +271,8 @@ patternProperties:
     description: Shenzen Chuangsiqi Technology Co.,Ltd.
   "^cubietech,.*":
     description: Cubietech, Ltd.
+  "^cui,.*":
+    description: CUI Devices
   "^cypress,.*":
     description: Cypress Semiconductor Corporation
   "^cznic,.*":

Documentation/driver-api/media/camera-sensor.rst

@@ -3,10 +3,10 @@
 Writing camera sensor drivers
 =============================
 
-CSI-2
------
+CSI-2 and parallel (BT.601 and BT.656) busses
+---------------------------------------------
 
-Please see what is written on :ref:`MIPI_CSI_2`.
+Please see :ref:`transmitter-receiver`.
 
 Handling clocks
 ---------------
@@ -26,15 +26,16 @@ user.
 ACPI
 ~~~~
 
-Read the "clock-frequency" _DSD property to denote the frequency. The driver can
-rely on this frequency being used.
+Read the ``clock-frequency`` _DSD property to denote the frequency. The driver
+can rely on this frequency being used.
 
 Devicetree
 ~~~~~~~~~~
 
-The currently preferred way to achieve this is using "assigned-clock-rates"
-property. See Documentation/devicetree/bindings/clock/clock-bindings.txt for
-more information. The driver then gets the frequency using clk_get_rate().
+The currently preferred way to achieve this is using ``assigned-clocks``,
+``assigned-clock-parents`` and ``assigned-clock-rates`` properties. See
+``Documentation/devicetree/bindings/clock/clock-bindings.txt`` for more
+information. The driver then gets the frequency using ``clk_get_rate()``.
 
 This approach has the drawback that there's no guarantee that the frequency
 hasn't been modified directly or indirectly by another driver, or supported by
@@ -55,7 +56,7 @@ processing pipeline as one or more sub-devices with different cropping and
 scaling configurations. The output size of the device is the result of a series
 of cropping and scaling operations from the device's pixel array's size.
 
-An example of such a driver is the smiapp driver (see drivers/media/i2c/smiapp).
+An example of such a driver is the CCS driver (see ``drivers/media/i2c/ccs``).
 
 Register list based drivers
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -67,7 +68,7 @@ level are independent. How a driver picks such configuration is based on the
 format set on a source pad at the end of the device's internal pipeline.
 
 Most sensor drivers are implemented this way, see e.g.
-drivers/media/i2c/imx319.c for an example.
+``drivers/media/i2c/imx319.c`` for an example.
 
 Frame interval configuration
 ----------------------------
@@ -94,9 +95,10 @@ large variety of devices beyond camera sensors. Devices that have no analogue
 crop, use the full source image size, i.e. pixel array size.
 
 Horizontal and vertical blanking are specified by ``V4L2_CID_HBLANK`` and
-``V4L2_CID_VBLANK``, respectively. The unit of these controls are lines. The
-pixel rate is specified by ``V4L2_CID_PIXEL_RATE`` in the same sub-device. The
-unit of that control is Hz.
+``V4L2_CID_VBLANK``, respectively. The unit of the ``V4L2_CID_HBLANK`` control
+is pixels and the unit of the ``V4L2_CID_VBLANK`` is lines. The pixel rate in
+the sensor's **pixel array** is specified by ``V4L2_CID_PIXEL_RATE`` in the same
+sub-device. The unit of that control is pixels per second.
 
 Register list based drivers need to implement read-only sub-device nodes for the
 purpose. Devices that are not register list based need these to configure the
@@ -125,14 +127,14 @@ general, the device must be powered on at least when its registers are being
 accessed and when it is streaming.
 
 Existing camera sensor drivers may rely on the old
-:c:type:`v4l2_subdev_core_ops`->s_power() callback for bridge or ISP drivers to
+struct v4l2_subdev_core_ops->s_power() callback for bridge or ISP drivers to
 manage their power state. This is however **deprecated**. If you feel you need
 to begin calling an s_power from an ISP or a bridge driver, instead please add
 runtime PM support to the sensor driver you are using. Likewise, new drivers
 should not use s_power.
 
 Please see examples in e.g. ``drivers/media/i2c/ov8856.c`` and
-``drivers/media/i2c/smiapp/smiapp-core.c``. The two drivers work in both ACPI
+``drivers/media/i2c/ccs/ccs-core.c``. The two drivers work in both ACPI
 and DT based systems.
 
 Control framework
@@ -149,16 +151,3 @@ used to obtain device's power state after the power state transition:
 The function returns a non-zero value if it succeeded getting the power count or
 runtime PM was disabled, in either of which cases the driver may proceed to
 access the device.
-
-Controls
---------
-
-For camera sensors that are connected to a bus where transmitter and receiver
-require common configuration set by drivers, such as CSI-2 or parallel (BT.601
-or BT.656) bus, the ``V4L2_CID_LINK_FREQ`` control is mandatory on transmitter
-drivers. Receiver drivers can use the ``V4L2_CID_LINK_FREQ`` to query the
-frequency used on the bus.
-
-The transmitter drivers should also implement ``V4L2_CID_PIXEL_RATE`` control in
-order to tell the maximum pixel rate to the receiver. This is required on raw
-camera sensors.

Documentation/driver-api/media/cec-core.rst

@@ -130,9 +130,12 @@ To enable/disable the hardware::
 	int (*adap_enable)(struct cec_adapter *adap, bool enable);
 
 This callback enables or disables the CEC hardware. Enabling the CEC hardware
-means powering it up in a state where no logical addresses are claimed. This
-op assumes that the physical address (adap->phys_addr) is valid when enable is
-true and will not change while the CEC adapter remains enabled. The initial
+means powering it up in a state where no logical addresses are claimed. The
+physical address will always be valid if CEC_CAP_NEEDS_HPD is set. If that
+capability is not set, then the physical address can change while the CEC
+hardware is enabled. CEC drivers should not set CEC_CAP_NEEDS_HPD unless
+the hardware design requires that as this will make it impossible to wake
+up displays that pull the HPD low when in standby mode.  The initial
 state of the CEC adapter after calling cec_allocate_adapter() is disabled.
 
 Note that adap_enable must return 0 if enable is false.

Documentation/driver-api/media/csi2.rst

@@ -1,94 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. _MIPI_CSI_2:
-
-MIPI CSI-2
-==========
-
-CSI-2 is a data bus intended for transferring images from cameras to
-the host SoC. It is defined by the `MIPI alliance`_.
-
-.. _`MIPI alliance`: http://www.mipi.org/
-
-Media bus formats
------------------
-
-See :ref:`v4l2-mbus-pixelcode` for details on which media bus formats should
-be used for CSI-2 interfaces.
-
-Transmitter drivers
--------------------
-
-CSI-2 transmitter, such as a sensor or a TV tuner, drivers need to
-provide the CSI-2 receiver with information on the CSI-2 bus
-configuration. These include the V4L2_CID_LINK_FREQ and
-V4L2_CID_PIXEL_RATE controls and
-(:c:type:`v4l2_subdev_video_ops`->s_stream() callback). These
-interface elements must be present on the sub-device represents the
-CSI-2 transmitter.
-
-The V4L2_CID_LINK_FREQ control is used to tell the receiver driver the
-frequency (and not the symbol rate) of the link. The V4L2_CID_PIXEL_RATE
-control may be used by the receiver to obtain the pixel rate the transmitter
-uses. The :c:type:`v4l2_subdev_video_ops`->s_stream() callback provides an
-ability to start and stop the stream.
-
-The value of the V4L2_CID_PIXEL_RATE is calculated as follows::
-
-	pixel_rate = link_freq * 2 * nr_of_lanes * 16 / k / bits_per_sample
-
-where
-
-.. list-table:: variables in pixel rate calculation
-   :header-rows: 1
-
-   * - variable or constant
-     - description
-   * - link_freq
-     - The value of the V4L2_CID_LINK_FREQ integer64 menu item.
-   * - nr_of_lanes
-     - Number of data lanes used on the CSI-2 link. This can
-       be obtained from the OF endpoint configuration.
-   * - 2
-     - Two bits are transferred per clock cycle per lane.
-   * - bits_per_sample
-     - Number of bits per sample.
-   * - k
-     - 16 for D-PHY and 7 for C-PHY
-
-The transmitter drivers must, if possible, configure the CSI-2
-transmitter to *LP-11 mode* whenever the transmitter is powered on but
-not active, and maintain *LP-11 mode* until stream on. Only at stream
-on should the transmitter activate the clock on the clock lane and
-transition to *HS mode*.
-
-Some transmitters do this automatically but some have to be explicitly
-programmed to do so, and some are unable to do so altogether due to
-hardware constraints.
-
-Stopping the transmitter
-^^^^^^^^^^^^^^^^^^^^^^^^
-
-A transmitter stops sending the stream of images as a result of
-calling the ``.s_stream()`` callback. Some transmitters may stop the
-stream at a frame boundary whereas others stop immediately,
-effectively leaving the current frame unfinished. The receiver driver
-should not make assumptions either way, but function properly in both
-cases.
-
-Receiver drivers
-----------------
-
-Before the receiver driver may enable the CSI-2 transmitter by using
-the :c:type:`v4l2_subdev_video_ops`->s_stream(), it must have powered
-the transmitter up by using the
-:c:type:`v4l2_subdev_core_ops`->s_power() callback. This may take
-place either indirectly by using :c:func:`v4l2_pipeline_pm_get` or
-directly.
-
-Formats
--------
-
-The media bus pixel codes document parallel formats. Should the pixel data be
-transported over a serial bus, the media bus pixel code that describes a
-parallel format that transfers a sample on a single clock cycle is used.

Documentation/driver-api/media/index.rst

@@ -37,7 +37,7 @@ Documentation/userspace-api/media/index.rst
     rc-core
     mc-core
     cec-core
-    csi2
+    tx-rx
     camera-sensor
 
     drivers/index

Documentation/driver-api/media/tx-rx.rst

@@ -0,0 +1,133 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _transmitter-receiver:
+
+Pixel data transmitter and receiver drivers
+===========================================
+
+V4L2 supports various devices that transmit and receive pixel data. Examples of
+these devices include a camera sensor, a TV tuner and a parallel or a CSI-2
+receiver in an SoC.
+
+Bus types
+---------
+
+The following busses are the most common. This section discusses these two only.
+
+MIPI CSI-2
+^^^^^^^^^^
+
+CSI-2 is a data bus intended for transferring images from cameras to
+the host SoC. It is defined by the `MIPI alliance`_.
+
+.. _`MIPI alliance`: https://www.mipi.org/
+
+Parallel
+^^^^^^^^
+
+`BT.601`_ and `BT.656`_ are the most common parallel busses.
+
+.. _`BT.601`: https://en.wikipedia.org/wiki/Rec._601
+.. _`BT.656`: https://en.wikipedia.org/wiki/ITU-R_BT.656
+
+Transmitter drivers
+-------------------
+
+Transmitter drivers generally need to provide the receiver drivers with the
+configuration of the transmitter. What is required depends on the type of the
+bus. These are common for both busses.
+
+Media bus pixel code
+^^^^^^^^^^^^^^^^^^^^
+
+See :ref:`v4l2-mbus-pixelcode`.
+
+Link frequency
+^^^^^^^^^^^^^^
+
+The :ref:`V4L2_CID_LINK_FREQ <v4l2-cid-link-freq>` control is used to tell the
+receiver the frequency of the bus (i.e. it is not the same as the symbol rate).
+
+``.s_stream()`` callback
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+The struct struct v4l2_subdev_video_ops->s_stream() callback is used by the
+receiver driver to control the transmitter driver's streaming state.
+
+
+CSI-2 transmitter drivers
+-------------------------
+
+Pixel rate
+^^^^^^^^^^
+
+The pixel rate on the bus is calculated as follows::
+
+	pixel_rate = link_freq * 2 * nr_of_lanes * 16 / k / bits_per_sample
+
+where
+
+.. list-table:: variables in pixel rate calculation
+   :header-rows: 1
+
+   * - variable or constant
+     - description
+   * - link_freq
+     - The value of the ``V4L2_CID_LINK_FREQ`` integer64 menu item.
+   * - nr_of_lanes
+     - Number of data lanes used on the CSI-2 link. This can
+       be obtained from the OF endpoint configuration.
+   * - 2
+     - Data is transferred on both rising and falling edge of the signal.
+   * - bits_per_sample
+     - Number of bits per sample.
+   * - k
+     - 16 for D-PHY and 7 for C-PHY
+
+.. note::
+
+	The pixel rate calculated this way is **not** the same thing as the
+	pixel rate on the camera sensor's pixel array which is indicated by the
+	:ref:`V4L2_CID_PIXEL_RATE <v4l2-cid-pixel-rate>` control.
+
+LP-11 and LP-111 modes
+^^^^^^^^^^^^^^^^^^^^^^
+
+As part of transitioning to high speed mode, a CSI-2 transmitter typically
+briefly sets the bus to LP-11 or LP-111 state, depending on the PHY. This period
+may be as short as 100 µs, during which the receiver observes this state and
+proceeds its own part of high speed mode transition.
+
+Most receivers are capable of autonomously handling this once the software has
+configured them to do so, but there are receivers which require software
+involvement in observing LP-11 or LP-111 state. 100 µs is a brief period to hit
+in software, especially when there is no interrupt telling something is
+happening.
+
+One way to address this is to configure the transmitter side explicitly to LP-11
+or LP-111 mode, which requires support from the transmitter hardware. This is
+not universally available. Many devices return to this state once streaming is
+stopped while the state after power-on is LP-00 or LP-000.
+
+The ``.pre_streamon()`` callback may be used to prepare a transmitter for
+transitioning to streaming state, but not yet start streaming. Similarly, the
+``.post_streamoff()`` callback is used to undo what was done by the
+``.pre_streamon()`` callback. The caller of ``.pre_streamon()`` is thus required
+to call ``.post_streamoff()`` for each successful call of ``.pre_streamon()``.
+
+In the context of CSI-2, the ``.pre_streamon()`` callback is used to transition
+the transmitter to the LP-11 or LP-111 mode. This also requires powering on the
+device, so this should be only done when it is needed.
+
+Receiver drivers that do not need explicit LP-11 or LP-111 mode setup are waived
+from calling the two callbacks.
+
+Stopping the transmitter
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+A transmitter stops sending the stream of images as a result of
+calling the ``.s_stream()`` callback. Some transmitters may stop the
+stream at a frame boundary whereas others stop immediately,
+effectively leaving the current frame unfinished. The receiver driver
+should not make assumptions either way, but function properly in both
+cases.

Documentation/sound/alsa-configuration.rst

@@ -1059,6 +1059,12 @@ The model name ``generic`` is treated as a special case.  When this
 model is given, the driver uses the generic codec parser without
 "codec-patch".  It's sometimes good for testing and debugging.
 
+The model option can be used also for aliasing to another PCI or codec
+SSID.  When it's passed in the form of ``model=XXXX:YYYY`` where XXXX
+and YYYY are the sub-vendor and sub-device IDs in hex numbers,
+respectively, the driver will refer to that SSID as a reference to the
+quirk table.
+
 If the default configuration doesn't work and one of the above
 matches with your device, report it together with alsa-info.sh
 output (with ``--no-upload`` option) to kernel bugzilla or alsa-devel
@@ -2252,6 +2258,27 @@ delayed_register
     The driver prints a message like "Found post-registration device
     assignment: 1234abcd:04" for such a device, so that user can
     notice the need.
+quirk_flags
+    Contains the bit flags for various device specific workarounds.
+    Applied to the corresponding card index.
+
+        * bit 0: Skip reading sample rate for devices
+        * bit 1: Create Media Controller API entries
+        * bit 2: Allow alignment on audio sub-slot at transfer
+        * bit 3: Add length specifier to transfers
+        * bit 4: Start playback stream at first in implement feedback mode
+        * bit 5: Skip clock selector setup
+        * bit 6: Ignore errors from clock source search
+        * bit 7: Indicates ITF-USB DSD based DACs
+        * bit 8: Add a delay of 20ms at each control message handling
+        * bit 9: Add a delay of 1-2ms at each control message handling
+        * bit 10: Add a delay of 5-6ms at each control message handling
+        * bit 11: Add a delay of 50ms at each interface setup
+        * bit 12: Perform sample rate validations at probe
+        * bit 13: Disable runtime PM autosuspend
+        * bit 14: Ignore errors for mixer access
+        * bit 15: Support generic DSD raw U32_BE format
+        * bit 16: Set up the interface at first like UAC1
 
 This module supports multiple devices, autoprobe and hotplugging.
 
@@ -2261,11 +2288,14 @@ check.
 
 NB: ``ignore_ctl_error=1`` may help when you get an error at accessing
 the mixer element such as URB error -22.  This happens on some
-buggy USB device or the controller.
+buggy USB device or the controller.  This workaround corresponds to
+the ``quirk_flags`` bit 14, too.
 
-NB: quirk_alias option is provided only for testing / development.
+NB: ``quirk_alias`` option is provided only for testing / development.
 If you want to have a proper support, contact to upstream for
 adding the matching quirk in the driver code statically.
+Ditto for ``quirk_flags``.  If a device is known to require specific
+workarounds, please report to the upstream.
 
 Module snd-usb-caiaq
 --------------------

Documentation/sound/hd-audio/notes.rst

@@ -215,6 +215,17 @@ There are a few special model option values:
 * when ``generic`` is passed, the codec-specific parser is skipped and
   only the generic parser is used.
 
+A new style for the model option that was introduced since 5.15 kernel
+is to pass the PCI or codec SSID in the form of ``model=XXXX:YYYY``
+where XXXX and YYYY are the sub-vendor and sub-device IDs in hex
+numbers, respectively.  This is a kind of aliasing to another device;
+when this form is given, the driver will refer to that SSID as a
+reference to the quirk table.  It'd be useful especially when the
+target quirk isn't listed in the model table.  For example, passing
+model=103c:8862 will apply the quirk for HP ProBook 445 G8 (which
+isn't found in the model table as of writing) as long as the device is
+handled equivalently by the same driver.
+
 
 Speaker and Headphone Output
 ----------------------------

Documentation/sound/kernel-api/writing-an-alsa-driver.rst

@@ -4172,6 +4172,39 @@ module license as GPL, etc., otherwise the system is shown as “tainted”.
   MODULE_LICENSE("GPL");
 
 
+Device-Managed Resources
+========================
+
+In the examples above, all resources are allocated and released
+manually.  But human beings are lazy in nature, especially developers
+are lazier.  So there are some ways to automate the release part; it's
+the (device-)managed resources aka devres or devm family.  For
+example, an object allocated via :c:func:`devm_kmalloc()` will be
+freed automatically at unbinding the device.
+
+ALSA core provides also the device-managed helper, namely,
+:c:func:`snd_devm_card_new()` for creating a card object.
+Call this functions instead of the normal :c:func:`snd_card_new()`,
+and you can forget the explicit :c:func:`snd_card_free()` call, as
+it's called automagically at error and removal paths.
+
+One caveat is that the call of :c:func:`snd_card_free()` would be put
+at the beginning of the call chain only after you call
+:c:func:`snd_card_register()`.
+
+Also, the ``private_free`` callback is always called at the card free,
+so be careful to put the hardware clean-up procedure in
+``private_free`` callback.  It might be called even before you
+actually set up at an earlier error path.  For avoiding such an
+invalid initialization, you can set ``private_free`` callback after
+:c:func:`snd_card_register()` call succeeds.
+
+Another thing to be remarked is that you should use device-managed
+helpers for each component as much as possible once when you manage
+the card in that way.  Mixing up with the normal and the managed
+resources may screw up the release order.
+
+
 How To Put Your Driver Into ALSA Tree
 =====================================
 

Documentation/userspace-api/media/cec.h.rst.exceptions

@@ -140,7 +140,7 @@ ignore define CEC_OP_REC_SEQ_TUESDAY
 ignore define CEC_OP_REC_SEQ_WEDNESDAY
 ignore define CEC_OP_REC_SEQ_THURSDAY
 ignore define CEC_OP_REC_SEQ_FRIDAY
-ignore define CEC_OP_REC_SEQ_SATERDAY
+ignore define CEC_OP_REC_SEQ_SATURDAY
 ignore define CEC_OP_REC_SEQ_ONCE_ONLY
 
 ignore define CEC_MSG_CLEAR_DIGITAL_TIMER

Documentation/userspace-api/media/v4l/ext-ctrls-codec.rst

@@ -1174,7 +1174,24 @@ enum v4l2_mpeg_video_h264_entropy_mode -
     Cyclic intra macroblock refresh. This is the number of continuous
     macroblocks refreshed every frame. Each frame a successive set of
     macroblocks is refreshed until the cycle completes and starts from
-    the top of the frame. Applicable to H264, H263 and MPEG4 encoder.
+    the top of the frame. Setting this control to zero means that
+    macroblocks will not be refreshed.  Note that this control will not
+    take effect when ``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD`` control
+    is set to non zero value.
+    Applicable to H264, H263 and MPEG4 encoder.
+
+``V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD (integer)``
+    Intra macroblock refresh period. This sets the period to refresh
+    the whole frame. In other words, this defines the number of frames
+    for which the whole frame will be intra-refreshed.  An example:
+    setting period to 1 means that the whole frame will be refreshed,
+    setting period to 2 means that the half of macroblocks will be
+    intra-refreshed on frameX and the other half of macroblocks
+    will be refreshed in frameX + 1 and so on. Setting the period to
+    zero means no period is specified.
+    Note that if the client sets this control to non zero value the
+    ``V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB`` control shall be
+    ignored. Applicable to H264 and HEVC encoders.
 
 ``V4L2_CID_MPEG_VIDEO_FRAME_RC_ENABLE (boolean)``
     Frame level rate control enable. If this control is disabled then
@@ -3000,6 +3017,9 @@ enum v4l2_mpeg_video_hevc_size_of_length_field -
     * - __u8
       - ``pic_struct``
       -
+    * - __u32
+      - ``slice_segment_addr``
+      -
     * - __u8
       - ``ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]``
       - The list of L0 reference elements as indices in the DPB.

Documentation/userspace-api/media/v4l/ext-ctrls-image-process.rst

@@ -20,25 +20,26 @@ Image Process Control IDs
 ``V4L2_CID_IMAGE_PROC_CLASS (class)``
     The IMAGE_PROC class descriptor.
 
+.. _v4l2-cid-link-freq:
+
 ``V4L2_CID_LINK_FREQ (integer menu)``
-    Data bus frequency. Together with the media bus pixel code, bus type
-    (clock cycles per sample), the data bus frequency defines the pixel
-    rate (``V4L2_CID_PIXEL_RATE``) in the pixel array (or possibly
-    elsewhere, if the device is not an image sensor). The frame rate can
-    be calculated from the pixel clock, image width and height and
-    horizontal and vertical blanking. While the pixel rate control may
-    be defined elsewhere than in the subdev containing the pixel array,
-    the frame rate cannot be obtained from that information. This is
-    because only on the pixel array it can be assumed that the vertical
-    and horizontal blanking information is exact: no other blanking is
-    allowed in the pixel array. The selection of frame rate is performed
-    by selecting the desired horizontal and vertical blanking. The unit
-    of this control is Hz.
+    The frequency of the data bus (e.g. parallel or CSI-2).
+
+.. _v4l2-cid-pixel-rate:
 
 ``V4L2_CID_PIXEL_RATE (64-bit integer)``
-    Pixel rate in the source pads of the subdev. This control is
+    Pixel sampling rate in the device's pixel array. This control is
     read-only and its unit is pixels / second.
 
+    Some devices use horizontal and vertical balanking to configure the frame
+    rate. The frame rate can be calculated from the pixel rate, analogue crop
+    rectangle as well as horizontal and vertical blanking. The pixel rate
+    control may be present in a different sub-device than the blanking controls
+    and the analogue crop rectangle configuration.
+
+    The configuration of the frame rate is performed by selecting the desired
+    horizontal and vertical blanking. The unit of this control is Hz.
+
 ``V4L2_CID_TEST_PATTERN (menu)``
     Some capture/display/sensor devices have the capability to generate
     test pattern images. These hardware specific test patterns can be

MAINTAINERS

@@ -13846,6 +13846,15 @@ T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/ov8856.yaml
 F:	drivers/media/i2c/ov8856.c
 
+OMNIVISION OV9282 SENSOR DRIVER
+M:	Paul J. Murphy <paul.j.murphy@intel.com>
+M:	Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
+F:	drivers/media/i2c/ov9282.c
+
 OMNIVISION OV9640 SENSOR DRIVER
 M:	Petr Cvek <petrcvekcz@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -17379,6 +17388,15 @@ T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
 F:	drivers/media/i2c/imx334.c
 
+SONY IMX335 SENSOR DRIVER
+M:	Paul J. Murphy <paul.j.murphy@intel.com>
+M:	Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
+F:	drivers/media/i2c/imx335.c
+
 SONY IMX355 SENSOR DRIVER
 M:	Tianshu Qiu <tian.shu.qiu@intel.com>
 L:	linux-media@vger.kernel.org
@@ -17386,6 +17404,15 @@ S:	Maintained
 T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/i2c/imx355.c
 
+SONY IMX412 SENSOR DRIVER
+M:	Paul J. Murphy <paul.j.murphy@intel.com>
+M:	Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+T:	git git://linuxtv.org/media_tree.git
+F:	Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
+F:	drivers/media/i2c/imx412.c
+
 SONY MEMORYSTICK SUBSYSTEM
 M:	Maxim Levitsky <maximlevitsky@gmail.com>
 M:	Alex Dubov <oakad@yahoo.com>

drivers/media/cec/core/cec-pin-priv.h

@@ -209,8 +209,8 @@ struct cec_pin {
 	u32				work_pin_events_dropped_cnt;
 	ktime_t				timer_ts;
 	u32				timer_cnt;
-	u32				timer_100ms_overruns;
-	u32				timer_300ms_overruns;
+	u32				timer_100us_overruns;
+	u32				timer_300us_overruns;
 	u32				timer_max_overrun;
 	u32				timer_sum_overrun;
 

drivers/media/cec/core/cec-pin.c

@@ -854,9 +854,9 @@ static enum hrtimer_restart cec_pin_timer(struct hrtimer *timer)
 		if (delta > 100 && pin->state != CEC_ST_IDLE) {
 			/* Keep track of timer overruns */
 			pin->timer_sum_overrun += delta;
-			pin->timer_100ms_overruns++;
+			pin->timer_100us_overruns++;
 			if (delta > 300)
-				pin->timer_300ms_overruns++;
+				pin->timer_300us_overruns++;
 			if (delta > pin->timer_max_overrun)
 				pin->timer_max_overrun = delta;
 		}
@@ -1207,15 +1207,15 @@ static void cec_pin_adap_status(struct cec_adapter *adap,
 	seq_printf(file, "cec pin events dropped: %u\n",
 		   pin->work_pin_events_dropped_cnt);
 	seq_printf(file, "irq failed: %d\n", pin->enable_irq_failed);
-	if (pin->timer_100ms_overruns) {
-		seq_printf(file, "timer overruns > 100ms: %u of %u\n",
-			   pin->timer_100ms_overruns, pin->timer_cnt);
-		seq_printf(file, "timer overruns > 300ms: %u of %u\n",
-			   pin->timer_300ms_overruns, pin->timer_cnt);
+	if (pin->timer_100us_overruns) {
+		seq_printf(file, "timer overruns > 100us: %u of %u\n",
+			   pin->timer_100us_overruns, pin->timer_cnt);
+		seq_printf(file, "timer overruns > 300us: %u of %u\n",
+			   pin->timer_300us_overruns, pin->timer_cnt);
 		seq_printf(file, "max timer overrun: %u usecs\n",
 			   pin->timer_max_overrun);
 		seq_printf(file, "avg timer overrun: %u usecs\n",
-			   pin->timer_sum_overrun / pin->timer_100ms_overruns);
+			   pin->timer_sum_overrun / pin->timer_100us_overruns);
 	}
 	if (pin->rx_start_bit_low_too_short_cnt)
 		seq_printf(file,
@@ -1245,8 +1245,8 @@ static void cec_pin_adap_status(struct cec_adapter *adap,
 	seq_printf(file, "tx detected low drive: %u\n", pin->tx_low_drive_cnt);
 	pin->work_pin_events_dropped_cnt = 0;
 	pin->timer_cnt = 0;
-	pin->timer_100ms_overruns = 0;
-	pin->timer_300ms_overruns = 0;
+	pin->timer_100us_overruns = 0;
+	pin->timer_300us_overruns = 0;
 	pin->timer_max_overrun = 0;
 	pin->timer_sum_overrun = 0;
 	pin->rx_start_bit_low_too_short_cnt = 0;

drivers/media/cec/platform/stm32/stm32-cec.c

@@ -305,14 +305,16 @@ static int stm32_cec_probe(struct platform_device *pdev)
 
 	cec->clk_hdmi_cec = devm_clk_get(&pdev->dev, "hdmi-cec");
 	if (IS_ERR(cec->clk_hdmi_cec) &&
-	    PTR_ERR(cec->clk_hdmi_cec) == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
+	    PTR_ERR(cec->clk_hdmi_cec) == -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		goto err_unprepare_cec_clk;
+	}
 
 	if (!IS_ERR(cec->clk_hdmi_cec)) {
 		ret = clk_prepare(cec->clk_hdmi_cec);
 		if (ret) {
 			dev_err(&pdev->dev, "Can't prepare hdmi-cec clock\n");
-			return ret;
+			goto err_unprepare_cec_clk;
 		}
 	}
 
@@ -324,19 +326,27 @@ static int stm32_cec_probe(struct platform_device *pdev)
 			CEC_NAME, caps,	CEC_MAX_LOG_ADDRS);
 	ret = PTR_ERR_OR_ZERO(cec->adap);
 	if (ret)
-		return ret;
+		goto err_unprepare_hdmi_cec_clk;
 
 	ret = cec_register_adapter(cec->adap, &pdev->dev);
-	if (ret) {
-		cec_delete_adapter(cec->adap);
-		return ret;
-	}
+	if (ret)
+		goto err_delete_adapter;
 
 	cec_hw_init(cec);
 
 	platform_set_drvdata(pdev, cec);
 
 	return 0;
+
+err_delete_adapter:
+	cec_delete_adapter(cec->adap);
+
+err_unprepare_hdmi_cec_clk:
+	clk_unprepare(cec->clk_hdmi_cec);
+
+err_unprepare_cec_clk:
+	clk_unprepare(cec->clk_cec);
+	return ret;
 }
 
 static int stm32_cec_remove(struct platform_device *pdev)

drivers/media/cec/platform/tegra/tegra_cec.c

@@ -366,7 +366,11 @@ static int tegra_cec_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	clk_prepare_enable(cec->clk);
+	ret = clk_prepare_enable(cec->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to prepare clock for CEC\n");
+		return ret;
+	}
 
 	/* set context info. */
 	cec->dev = &pdev->dev;
@@ -446,9 +450,7 @@ static int tegra_cec_resume(struct platform_device *pdev)
 
 	dev_notice(&pdev->dev, "Resuming\n");
 
-	clk_prepare_enable(cec->clk);
-
-	return 0;
+	return clk_prepare_enable(cec->clk);
 }
 #endif
 

drivers/media/dvb-frontends/cx24117.c

@@ -1172,7 +1172,6 @@ struct dvb_frontend *cx24117_attach(const struct cx24117_config *config,
 			"%s: Error attaching frontend %d\n",
 			KBUILD_MODNAME, demod);
 		goto error1;
-		break;
 	case 1:
 		/* new priv instance */
 		priv->i2c = i2c;

drivers/media/dvb-frontends/dib8000.c

@@ -2107,32 +2107,55 @@ static void dib8000_load_ana_fe_coefs(struct dib8000_state *state, const s16 *an
 			dib8000_write_word(state, 117 + mode, ana_fe[mode]);
 }
 
-static const u16 lut_prbs_2k[14] = {
-	0, 0x423, 0x009, 0x5C7, 0x7A6, 0x3D8, 0x527, 0x7FF, 0x79B, 0x3D6, 0x3A2, 0x53B, 0x2F4, 0x213
+static const u16 lut_prbs_2k[13] = {
+	0x423, 0x009, 0x5C7,
+	0x7A6, 0x3D8, 0x527,
+	0x7FF, 0x79B, 0x3D6,
+	0x3A2, 0x53B, 0x2F4,
+	0x213
 };
-static const u16 lut_prbs_4k[14] = {
-	0, 0x208, 0x0C3, 0x7B9, 0x423, 0x5C7, 0x3D8, 0x7FF, 0x3D6, 0x53B, 0x213, 0x029, 0x0D0, 0x48E
+
+static const u16 lut_prbs_4k[13] = {
+	0x208, 0x0C3, 0x7B9,
+	0x423, 0x5C7, 0x3D8,
+	0x7FF, 0x3D6, 0x53B,
+	0x213, 0x029, 0x0D0,
+	0x48E
 };
-static const u16 lut_prbs_8k[14] = {
-	0, 0x740, 0x069, 0x7DD, 0x208, 0x7B9, 0x5C7, 0x7FF, 0x53B, 0x029, 0x48E, 0x4C4, 0x367, 0x684
+
+static const u16 lut_prbs_8k[13] = {
+	0x740, 0x069, 0x7DD,
+	0x208, 0x7B9, 0x5C7,
+	0x7FF, 0x53B, 0x029,
+	0x48E, 0x4C4, 0x367,
+	0x684
 };
 
 static u16 dib8000_get_init_prbs(struct dib8000_state *state, u16 subchannel)
 {
 	int sub_channel_prbs_group = 0;
+	int prbs_group;
 
-	sub_channel_prbs_group = (subchannel / 3) + 1;
-	dprintk("sub_channel_prbs_group = %d , subchannel =%d prbs = 0x%04x\n", sub_channel_prbs_group, subchannel, lut_prbs_8k[sub_channel_prbs_group]);
+	sub_channel_prbs_group = subchannel / 3;
+	if (sub_channel_prbs_group >= ARRAY_SIZE(lut_prbs_2k))
+		return 0;
 
 	switch (state->fe[0]->dtv_property_cache.transmission_mode) {
 	case TRANSMISSION_MODE_2K:
-			return lut_prbs_2k[sub_channel_prbs_group];
+		prbs_group = lut_prbs_2k[sub_channel_prbs_group];
+		break;
 	case TRANSMISSION_MODE_4K:
-			return lut_prbs_4k[sub_channel_prbs_group];
+		prbs_group =  lut_prbs_4k[sub_channel_prbs_group];
+		break;
 	default:
 	case TRANSMISSION_MODE_8K:
-			return lut_prbs_8k[sub_channel_prbs_group];
+		prbs_group = lut_prbs_8k[sub_channel_prbs_group];
 	}
+
+	dprintk("sub_channel_prbs_group = %d , subchannel =%d prbs = 0x%04x\n",
+		sub_channel_prbs_group, subchannel, prbs_group);
+
+	return prbs_group;
 }
 
 static void dib8000_set_13seg_channel(struct dib8000_state *state)
@@ -2409,10 +2432,8 @@ static void dib8000_set_isdbt_common_channel(struct dib8000_state *state, u8 seq
 	/* TSB or ISDBT ? apply it now */
 	if (c->isdbt_sb_mode) {
 		dib8000_set_sb_channel(state);
-		if (c->isdbt_sb_subchannel < 14)
-			init_prbs = dib8000_get_init_prbs(state, c->isdbt_sb_subchannel);
-		else
-			init_prbs = 0;
+		init_prbs = dib8000_get_init_prbs(state,
+						  c->isdbt_sb_subchannel);
 	} else {
 		dib8000_set_13seg_channel(state);
 		init_prbs = 0xfff;
@@ -3004,6 +3025,7 @@ static int dib8000_tune(struct dvb_frontend *fe)
 
 	unsigned long *timeout = &state->timeout;
 	unsigned long now = jiffies;
+	u16 init_prbs;
 #ifdef DIB8000_AGC_FREEZE
 	u16 agc1, agc2;
 #endif
@@ -3302,8 +3324,10 @@ static int dib8000_tune(struct dvb_frontend *fe)
 		break;
 
 	case CT_DEMOD_STEP_11:  /* 41 : init prbs autosearch */
-		if (state->subchannel <= 41) {
-			dib8000_set_subchannel_prbs(state, dib8000_get_init_prbs(state, state->subchannel));
+		init_prbs = dib8000_get_init_prbs(state, state->subchannel);
+
+		if (init_prbs) {
+			dib8000_set_subchannel_prbs(state, init_prbs);
 			*tune_state = CT_DEMOD_STEP_9;
 		} else {
 			*tune_state = CT_DEMOD_STOP;

drivers/media/i2c/Kconfig

@@ -842,6 +842,20 @@ config VIDEO_IMX334
 	  To compile this driver as a module, choose M here: the
 	  module will be called imx334.
 
+config VIDEO_IMX335
+	tristate "Sony IMX335 sensor support"
+	depends on OF_GPIO
+	depends on I2C && VIDEO_V4L2
+	select VIDEO_V4L2_SUBDEV_API
+	select MEDIA_CONTROLLER
+	select V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor driver for the Sony
+	  IMX335 camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx335.
+
 config VIDEO_IMX355
 	tristate "Sony IMX355 sensor support"
 	depends on I2C && VIDEO_V4L2
@@ -854,6 +868,20 @@ config VIDEO_IMX355
 	  To compile this driver as a module, choose M here: the
 	  module will be called imx355.
 
+config VIDEO_IMX412
+	tristate "Sony IMX412 sensor support"
+	depends on OF_GPIO
+	depends on I2C && VIDEO_V4L2
+	select VIDEO_V4L2_SUBDEV_API
+	select MEDIA_CONTROLLER
+	select V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor driver for the Sony
+	  IMX412 camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx412.
+
 config VIDEO_OV02A10
 	tristate "OmniVision OV02A10 sensor support"
 	depends on VIDEO_V4L2 && I2C
@@ -1103,6 +1131,20 @@ config VIDEO_OV8865
 	  To compile this driver as a module, choose M here: the
 	  module will be called ov8865.
 
+config VIDEO_OV9282
+	tristate "OmniVision OV9282 sensor support"
+	depends on OF_GPIO
+	depends on I2C && VIDEO_V4L2
+	select VIDEO_V4L2_SUBDEV_API
+	select MEDIA_CONTROLLER
+	select V4L2_FWNODE
+	help
+	  This is a Video4Linux2 sensor driver for the OmniVision
+	  OV9282 camera sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ov9282.
+
 config VIDEO_OV9640
 	tristate "OmniVision OV9640 sensor support"
 	depends on I2C && VIDEO_V4L2

drivers/media/i2c/Makefile

@@ -84,6 +84,7 @@ obj-$(CONFIG_VIDEO_OV772X) += ov772x.o
 obj-$(CONFIG_VIDEO_OV7740) += ov7740.o
 obj-$(CONFIG_VIDEO_OV8856) += ov8856.o
 obj-$(CONFIG_VIDEO_OV8865) += ov8865.o
+obj-$(CONFIG_VIDEO_OV9282) += ov9282.o
 obj-$(CONFIG_VIDEO_OV9640) += ov9640.o
 obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
 obj-$(CONFIG_VIDEO_OV9734) += ov9734.o
@@ -124,11 +125,12 @@ obj-$(CONFIG_VIDEO_IMX274)	+= imx274.o
 obj-$(CONFIG_VIDEO_IMX290)	+= imx290.o
 obj-$(CONFIG_VIDEO_IMX319)	+= imx319.o
 obj-$(CONFIG_VIDEO_IMX334)	+= imx334.o
+obj-$(CONFIG_VIDEO_IMX335)	+= imx335.o
 obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
+obj-$(CONFIG_VIDEO_IMX412)	+= imx412.o
 obj-$(CONFIG_VIDEO_MAX9286)	+= max9286.o
 obj-$(CONFIG_VIDEO_MAX9271_LIB)	+= max9271.o
 obj-$(CONFIG_VIDEO_RDACM20)	+= rdacm20.o
 obj-$(CONFIG_VIDEO_RDACM21)	+= rdacm21.o
 obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
-
 obj-$(CONFIG_SDR_MAX2175) += max2175.o

drivers/media/i2c/adv7180.c

@@ -94,6 +94,7 @@
 #define ADV7180_REG_SHAP_FILTER_CTL_1	0x0017
 #define ADV7180_REG_CTRL_2		0x001d
 #define ADV7180_REG_VSYNC_FIELD_CTL_1	0x0031
+#define ADV7180_VSYNC_FIELD_CTL_1_NEWAV 0x12
 #define ADV7180_REG_MANUAL_WIN_CTL_1	0x003d
 #define ADV7180_REG_MANUAL_WIN_CTL_2	0x003e
 #define ADV7180_REG_MANUAL_WIN_CTL_3	0x003f
@@ -205,6 +206,7 @@ struct adv7180_state {
 	struct mutex		mutex; /* mutual excl. when accessing chip */
 	int			irq;
 	struct gpio_desc	*pwdn_gpio;
+	struct gpio_desc	*rst_gpio;
 	v4l2_std_id		curr_norm;
 	bool			powered;
 	bool			streaming;
@@ -216,6 +218,7 @@ struct adv7180_state {
 	struct i2c_client	*vpp_client;
 	const struct adv7180_chip_info *chip_info;
 	enum v4l2_field		field;
+	bool			force_bt656_4;
 };
 #define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler,		\
 					    struct adv7180_state,	\
@@ -484,6 +487,19 @@ static void adv7180_set_power_pin(struct adv7180_state *state, bool on)
 	}
 }
 
+static void adv7180_set_reset_pin(struct adv7180_state *state, bool on)
+{
+	if (!state->rst_gpio)
+		return;
+
+	if (on) {
+		gpiod_set_value_cansleep(state->rst_gpio, 1);
+	} else {
+		gpiod_set_value_cansleep(state->rst_gpio, 0);
+		usleep_range(5000, 10000);
+	}
+}
+
 static int adv7180_set_power(struct adv7180_state *state, bool on)
 {
 	u8 val;
@@ -963,10 +979,26 @@ static int adv7182_init(struct adv7180_state *state)
 		adv7180_write(state, ADV7180_REG_EXTENDED_OUTPUT_CONTROL, 0x57);
 		adv7180_write(state, ADV7180_REG_CTRL_2, 0xc0);
 	} else {
-		if (state->chip_info->flags & ADV7180_FLAG_V2)
-			adv7180_write(state,
-				      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
-				      0x17);
+		if (state->chip_info->flags & ADV7180_FLAG_V2) {
+			if (state->force_bt656_4) {
+				/* ITU-R BT.656-4 compatible */
+				adv7180_write(state,
+					      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
+					      ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
+				/* Manually set NEWAVMODE */
+				adv7180_write(state,
+					      ADV7180_REG_VSYNC_FIELD_CTL_1,
+					      ADV7180_VSYNC_FIELD_CTL_1_NEWAV);
+				/* Manually set V bit end position in NTSC mode */
+				adv7180_write(state,
+					      ADV7180_REG_NTSC_V_BIT_END,
+					      ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
+			} else {
+				adv7180_write(state,
+					      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
+					      0x17);
+			}
+		}
 		else
 			adv7180_write(state,
 				      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
@@ -1263,6 +1295,7 @@ static int init_device(struct adv7180_state *state)
 	mutex_lock(&state->mutex);
 
 	adv7180_set_power_pin(state, true);
+	adv7180_set_reset_pin(state, false);
 
 	adv7180_write(state, ADV7180_REG_PWR_MAN, ADV7180_PWR_MAN_RES);
 	usleep_range(5000, 10000);
@@ -1314,6 +1347,7 @@ static int init_device(struct adv7180_state *state)
 static int adv7180_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct device_node *np = client->dev.of_node;
 	struct adv7180_state *state;
 	struct v4l2_subdev *sd;
 	int ret;
@@ -1338,6 +1372,17 @@ static int adv7180_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	state->rst_gpio = devm_gpiod_get_optional(&client->dev, "reset",
+						  GPIOD_OUT_HIGH);
+	if (IS_ERR(state->rst_gpio)) {
+		ret = PTR_ERR(state->rst_gpio);
+		v4l_err(client, "request for reset pin failed: %d\n", ret);
+		return ret;
+	}
+
+	if (of_property_read_bool(np, "adv,force-bt656-4"))
+		state->force_bt656_4 = true;
+
 	if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
 		state->csi_client = i2c_new_dummy_device(client->adapter,
 				ADV7180_DEFAULT_CSI_I2C_ADDR);
@@ -1392,11 +1437,19 @@ static int adv7180_probe(struct i2c_client *client,
 	if (ret)
 		goto err_free_irq;
 
-	v4l_info(client, "chip found @ 0x%02x (%s)\n",
-		 client->addr, client->adapter->name);
+	mutex_lock(&state->mutex);
+	ret = adv7180_read(state, ADV7180_REG_IDENT);
+	mutex_unlock(&state->mutex);
+	if (ret < 0)
+		goto err_v4l2_async_unregister;
+
+	v4l_info(client, "chip id 0x%x found @ 0x%02x (%s)\n",
+		 ret, client->addr, client->adapter->name);
 
 	return 0;
 
+err_v4l2_async_unregister:
+	v4l2_async_unregister_subdev(sd);
 err_free_irq:
 	if (state->irq > 0)
 		free_irq(client->irq, state);
@@ -1428,6 +1481,7 @@ static int adv7180_remove(struct i2c_client *client)
 	i2c_unregister_device(state->vpp_client);
 	i2c_unregister_device(state->csi_client);
 
+	adv7180_set_reset_pin(state, true);
 	adv7180_set_power_pin(state, false);
 
 	mutex_destroy(&state->mutex);

drivers/media/i2c/ccs/ccs-core.c

@@ -1943,6 +1943,51 @@ static int ccs_set_stream(struct v4l2_subdev *subdev, int enable)
 	return rval;
 }
 
+static int ccs_pre_streamon(struct v4l2_subdev *subdev, u32 flags)
+{
+	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+	int rval;
+
+	if (flags & V4L2_SUBDEV_PRE_STREAMON_FL_MANUAL_LP) {
+		switch (sensor->hwcfg.csi_signalling_mode) {
+		case CCS_CSI_SIGNALING_MODE_CSI_2_DPHY:
+			if (!(CCS_LIM(sensor, PHY_CTRL_CAPABILITY_2) &
+			      CCS_PHY_CTRL_CAPABILITY_2_MANUAL_LP_DPHY))
+				return -EACCES;
+			break;
+		case CCS_CSI_SIGNALING_MODE_CSI_2_CPHY:
+			if (!(CCS_LIM(sensor, PHY_CTRL_CAPABILITY_2) &
+			      CCS_PHY_CTRL_CAPABILITY_2_MANUAL_LP_CPHY))
+				return -EACCES;
+			break;
+		default:
+			return -EACCES;
+		}
+	}
+
+	rval = ccs_pm_get_init(sensor);
+	if (rval)
+		return rval;
+
+	if (flags & V4L2_SUBDEV_PRE_STREAMON_FL_MANUAL_LP) {
+		rval = ccs_write(sensor, MANUAL_LP_CTRL,
+				 CCS_MANUAL_LP_CTRL_ENABLE);
+		if (rval)
+			pm_runtime_put(&client->dev);
+	}
+
+	return rval;
+}
+
+static int ccs_post_streamoff(struct v4l2_subdev *subdev)
+{
+	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
+	struct i2c_client *client = v4l2_get_subdevdata(&sensor->src->sd);
+
+	return pm_runtime_put(&client->dev);
+}
+
 static int ccs_enum_mbus_code(struct v4l2_subdev *subdev,
 			      struct v4l2_subdev_state *sd_state,
 			      struct v4l2_subdev_mbus_code_enum *code)
@@ -2673,8 +2718,7 @@ static int ccs_get_skip_top_lines(struct v4l2_subdev *subdev, u32 *lines)
  */
 
 static ssize_t
-ccs_sysfs_nvm_read(struct device *dev, struct device_attribute *attr,
-		   char *buf)
+nvm_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev));
 	struct i2c_client *client = v4l2_get_subdevdata(subdev);
@@ -2704,11 +2748,10 @@ ccs_sysfs_nvm_read(struct device *dev, struct device_attribute *attr,
 	 */
 	return rval;
 }
-static DEVICE_ATTR(nvm, S_IRUGO, ccs_sysfs_nvm_read, NULL);
+static DEVICE_ATTR_RO(nvm);
 
 static ssize_t
-ccs_sysfs_ident_read(struct device *dev, struct device_attribute *attr,
-		     char *buf)
+ident_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct v4l2_subdev *subdev = i2c_get_clientdata(to_i2c_client(dev));
 	struct ccs_sensor *sensor = to_ccs_sensor(subdev);
@@ -2723,8 +2766,7 @@ ccs_sysfs_ident_read(struct device *dev, struct device_attribute *attr,
 				minfo->smia_manufacturer_id, minfo->model_id,
 				minfo->revision_number) + 1;
 }
-
-static DEVICE_ATTR(ident, S_IRUGO, ccs_sysfs_ident_read, NULL);
+static DEVICE_ATTR_RO(ident);
 
 /* -----------------------------------------------------------------------------
  * V4L2 subdev core operations
@@ -3058,6 +3100,8 @@ static int ccs_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 
 static const struct v4l2_subdev_video_ops ccs_video_ops = {
 	.s_stream = ccs_set_stream,
+	.pre_streamon = ccs_pre_streamon,
+	.post_streamoff = ccs_post_streamoff,
 };
 
 static const struct v4l2_subdev_pad_ops ccs_pad_ops = {

drivers/media/i2c/et8ek8/et8ek8_driver.c

@@ -1237,8 +1237,7 @@ static int et8ek8_dev_init(struct v4l2_subdev *subdev)
  * sysfs attributes
  */
 static ssize_t
-et8ek8_priv_mem_read(struct device *dev, struct device_attribute *attr,
-		     char *buf)
+priv_mem_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct v4l2_subdev *subdev = dev_get_drvdata(dev);
 	struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
@@ -1251,7 +1250,7 @@ et8ek8_priv_mem_read(struct device *dev, struct device_attribute *attr,
 
 	return ET8EK8_PRIV_MEM_SIZE;
 }
-static DEVICE_ATTR(priv_mem, 0444, et8ek8_priv_mem_read, NULL);
+static DEVICE_ATTR_RO(priv_mem);
 
 /* --------------------------------------------------------------------------
  * V4L2 subdev core operations

drivers/media/i2c/imx258.c

@@ -23,7 +23,7 @@
 #define IMX258_CHIP_ID			0x0258
 
 /* V_TIMING internal */
-#define IMX258_VTS_30FPS		0x0c98
+#define IMX258_VTS_30FPS		0x0c50
 #define IMX258_VTS_30FPS_2K		0x0638
 #define IMX258_VTS_30FPS_VGA		0x034c
 #define IMX258_VTS_MAX			0xffff
@@ -47,7 +47,7 @@
 /* Analog gain control */
 #define IMX258_REG_ANALOG_GAIN		0x0204
 #define IMX258_ANA_GAIN_MIN		0
-#define IMX258_ANA_GAIN_MAX		0x1fff
+#define IMX258_ANA_GAIN_MAX		480
 #define IMX258_ANA_GAIN_STEP		1
 #define IMX258_ANA_GAIN_DEFAULT		0x0
 

drivers/media/i2c/ov2740.c

@@ -51,7 +51,7 @@
 #define OV2740_REG_MWB_R_GAIN		0x500a
 #define OV2740_REG_MWB_G_GAIN		0x500c
 #define OV2740_REG_MWB_B_GAIN		0x500e
-#define OV2740_DGTL_GAIN_MIN		0
+#define OV2740_DGTL_GAIN_MIN		1024
 #define OV2740_DGTL_GAIN_MAX		4095
 #define OV2740_DGTL_GAIN_STEP		1
 #define OV2740_DGTL_GAIN_DEFAULT	1024
@@ -61,6 +61,12 @@
 #define OV2740_TEST_PATTERN_ENABLE	BIT(7)
 #define OV2740_TEST_PATTERN_BAR_SHIFT	2
 
+/* Group Access */
+#define OV2740_REG_GROUP_ACCESS		0x3208
+#define OV2740_GROUP_HOLD_START		0x0
+#define OV2740_GROUP_HOLD_END		0x10
+#define OV2740_GROUP_HOLD_LAUNCH	0xa0
+
 /* ISP CTRL00 */
 #define OV2740_REG_ISP_CTRL00		0x5000
 /* ISP CTRL01 */
@@ -438,6 +444,11 @@ static int ov2740_update_digital_gain(struct ov2740 *ov2740, u32 d_gain)
 {
 	int ret = 0;
 
+	ret = ov2740_write_reg(ov2740, OV2740_REG_GROUP_ACCESS, 1,
+			       OV2740_GROUP_HOLD_START);
+	if (ret)
+		return ret;
+
 	ret = ov2740_write_reg(ov2740, OV2740_REG_MWB_R_GAIN, 2, d_gain);
 	if (ret)
 		return ret;
@@ -446,7 +457,18 @@ static int ov2740_update_digital_gain(struct ov2740 *ov2740, u32 d_gain)
 	if (ret)
 		return ret;
 
-	return ov2740_write_reg(ov2740, OV2740_REG_MWB_B_GAIN, 2, d_gain);
+	ret = ov2740_write_reg(ov2740, OV2740_REG_MWB_B_GAIN, 2, d_gain);
+	if (ret)
+		return ret;
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_GROUP_ACCESS, 1,
+			       OV2740_GROUP_HOLD_END);
+	if (ret)
+		return ret;
+
+	ret = ov2740_write_reg(ov2740, OV2740_REG_GROUP_ACCESS, 1,
+			       OV2740_GROUP_HOLD_LAUNCH);
+	return ret;
 }
 
 static int ov2740_test_pattern(struct ov2740 *ov2740, u32 pattern)

drivers/media/i2c/ov5640.c

@@ -135,7 +135,9 @@ struct ov5640_pixfmt {
 static const struct ov5640_pixfmt ov5640_formats[] = {
 	{ MEDIA_BUS_FMT_JPEG_1X8, V4L2_COLORSPACE_JPEG, },
 	{ MEDIA_BUS_FMT_UYVY8_2X8, V4L2_COLORSPACE_SRGB, },
+	{ MEDIA_BUS_FMT_UYVY8_1X16, V4L2_COLORSPACE_SRGB, },
 	{ MEDIA_BUS_FMT_YUYV8_2X8, V4L2_COLORSPACE_SRGB, },
+	{ MEDIA_BUS_FMT_YUYV8_1X16, V4L2_COLORSPACE_SRGB, },
 	{ MEDIA_BUS_FMT_RGB565_2X8_LE, V4L2_COLORSPACE_SRGB, },
 	{ MEDIA_BUS_FMT_RGB565_2X8_BE, V4L2_COLORSPACE_SRGB, },
 	{ MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_COLORSPACE_SRGB, },
@@ -2338,11 +2340,13 @@ static int ov5640_set_framefmt(struct ov5640_dev *sensor,
 	u8 fmt, mux;
 
 	switch (format->code) {
+	case MEDIA_BUS_FMT_UYVY8_1X16:
 	case MEDIA_BUS_FMT_UYVY8_2X8:
 		/* YUV422, UYVY */
 		fmt = 0x3f;
 		mux = OV5640_FMT_MUX_YUV422;
 		break;
+	case MEDIA_BUS_FMT_YUYV8_1X16:
 	case MEDIA_BUS_FMT_YUYV8_2X8:
 		/* YUV422, YUYV */
 		fmt = 0x30;

drivers/media/i2c/ov8856.c

@@ -2304,25 +2304,26 @@ static int ov8856_get_hwcfg(struct ov8856 *ov8856, struct device *dev)
 
 		clk_set_rate(ov8856->xvclk, xvclk_rate);
 		xvclk_rate = clk_get_rate(ov8856->xvclk);
+
+		ov8856->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+							     GPIOD_OUT_LOW);
+		if (IS_ERR(ov8856->reset_gpio))
+			return PTR_ERR(ov8856->reset_gpio);
+
+		for (i = 0; i < ARRAY_SIZE(ov8856_supply_names); i++)
+			ov8856->supplies[i].supply = ov8856_supply_names[i];
+
+		ret = devm_regulator_bulk_get(dev,
+					      ARRAY_SIZE(ov8856_supply_names),
+					      ov8856->supplies);
+		if (ret)
+			return ret;
 	}
 
 	if (xvclk_rate != OV8856_XVCLK_19_2)
 		dev_warn(dev, "external clock rate %u is unsupported",
 			 xvclk_rate);
 
-	ov8856->reset_gpio = devm_gpiod_get_optional(dev, "reset",
-						     GPIOD_OUT_LOW);
-	if (IS_ERR(ov8856->reset_gpio))
-		return PTR_ERR(ov8856->reset_gpio);
-
-	for (i = 0; i < ARRAY_SIZE(ov8856_supply_names); i++)
-		ov8856->supplies[i].supply = ov8856_supply_names[i];
-
-	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ov8856_supply_names),
-				      ov8856->supplies);
-	if (ret)
-		return ret;
-
 	ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
 	if (!ep)
 		return -ENXIO;

drivers/media/i2c/ov9734.c

@@ -60,6 +60,12 @@
 #define OV9734_TEST_PATTERN_ENABLE	BIT(7)
 #define OV9734_TEST_PATTERN_BAR_SHIFT	2
 
+/* Group Access */
+#define OV9734_REG_GROUP_ACCESS		0x3208
+#define OV9734_GROUP_HOLD_START		0x0
+#define OV9734_GROUP_HOLD_END		0x10
+#define OV9734_GROUP_HOLD_LAUNCH	0xa0
+
 enum {
 	OV9734_LINK_FREQ_180MHZ_INDEX,
 };
@@ -433,6 +439,11 @@ static int ov9734_update_digital_gain(struct ov9734 *ov9734, u32 d_gain)
 {
 	int ret;
 
+	ret = ov9734_write_reg(ov9734, OV9734_REG_GROUP_ACCESS, 1,
+			       OV9734_GROUP_HOLD_START);
+	if (ret)
+		return ret;
+
 	ret = ov9734_write_reg(ov9734, OV9734_REG_MWB_R_GAIN, 2, d_gain);
 	if (ret)
 		return ret;
@@ -441,7 +452,18 @@ static int ov9734_update_digital_gain(struct ov9734 *ov9734, u32 d_gain)
 	if (ret)
 		return ret;
 
-	return ov9734_write_reg(ov9734, OV9734_REG_MWB_B_GAIN, 2, d_gain);
+	ret = ov9734_write_reg(ov9734, OV9734_REG_MWB_B_GAIN, 2, d_gain);
+	if (ret)
+		return ret;
+
+	ret = ov9734_write_reg(ov9734, OV9734_REG_GROUP_ACCESS, 1,
+			       OV9734_GROUP_HOLD_END);
+	if (ret)
+		return ret;
+
+	ret = ov9734_write_reg(ov9734, OV9734_REG_GROUP_ACCESS, 1,
+			       OV9734_GROUP_HOLD_LAUNCH);
+	return ret;
 }
 
 static int ov9734_test_pattern(struct ov9734 *ov9734, u32 pattern)

drivers/media/i2c/tda1997x.c

@@ -563,7 +563,7 @@ static void tda1997x_delayed_work_enable_hpd(struct work_struct *work)
 						    delayed_work_enable_hpd);
 	struct v4l2_subdev *sd = &state->sd;
 
-	v4l2_dbg(2, debug, sd, "%s:\n", __func__);
+	v4l2_dbg(2, debug, sd, "%s\n", __func__);
 
 	/* Set HPD high */
 	tda1997x_manual_hpd(sd, HPD_HIGH_OTHER);
@@ -1107,7 +1107,8 @@ tda1997x_detect_std(struct tda1997x_state *state,
 	hper = io_read16(sd, REG_H_PER) & MASK_HPER;
 	hsper = io_read16(sd, REG_HS_WIDTH) & MASK_HSWIDTH;
 	v4l2_dbg(1, debug, sd, "Signal Timings: %u/%u/%u\n", vper, hper, hsper);
-	if (!vper || !hper || !hsper)
+
+	if (!state->input_detect[0] && !state->input_detect[1])
 		return -ENOLINK;
 
 	for (i = 0; v4l2_dv_timings_presets[i].bt.width; i++) {
@@ -1695,14 +1696,15 @@ static int tda1997x_query_dv_timings(struct v4l2_subdev *sd,
 				     struct v4l2_dv_timings *timings)
 {
 	struct tda1997x_state *state = to_state(sd);
+	int ret;
 
 	v4l_dbg(1, debug, state->client, "%s\n", __func__);
 	memset(timings, 0, sizeof(struct v4l2_dv_timings));
 	mutex_lock(&state->lock);
-	tda1997x_detect_std(state, timings);
+	ret = tda1997x_detect_std(state, timings);
 	mutex_unlock(&state->lock);
 
-	return 0;
+	return ret;
 }
 
 static const struct v4l2_subdev_video_ops tda1997x_video_ops = {
@@ -2233,6 +2235,7 @@ static int tda1997x_core_init(struct v4l2_subdev *sd)
 	/* get initial HDMI status */
 	state->hdmi_status = io_read(sd, REG_HDMI_FLAGS);
 
+	io_write(sd, REG_EDID_ENABLE, EDID_ENABLE_A_EN | EDID_ENABLE_B_EN);
 	return 0;
 }
 

drivers/media/i2c/tvp5150.c

@@ -964,7 +964,7 @@ static int tvp5150_enable(struct v4l2_subdev *sd)
 
 	/*
 	 * Enable the YCbCr and clock outputs. In discrete sync mode
-	 * (non-BT.656) additionally enable the the sync outputs.
+	 * (non-BT.656) additionally enable the sync outputs.
 	 */
 	switch (decoder->mbus_type) {
 	case V4L2_MBUS_PARALLEL:

drivers/media/mc/mc-device.c

@@ -556,7 +556,7 @@ static const struct media_file_operations media_device_fops = {
  * sysfs
  */
 
-static ssize_t show_model(struct device *cd,
+static ssize_t model_show(struct device *cd,
 			  struct device_attribute *attr, char *buf)
 {
 	struct media_devnode *devnode = to_media_devnode(cd);
@@ -565,7 +565,7 @@ static ssize_t show_model(struct device *cd,
 	return sprintf(buf, "%.*s\n", (int)sizeof(mdev->model), mdev->model);
 }
 
-static DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
+static DEVICE_ATTR_RO(model);
 
 /* -----------------------------------------------------------------------------
  * Registration/unregistration

drivers/media/pci/ivtv/ivtv-cards.h

@@ -78,27 +78,53 @@
 #define IVTV_PCI_ID_SONY		0x104d
 
 /* hardware flags, no gaps allowed */
-#define IVTV_HW_CX25840			(1 << 0)
-#define IVTV_HW_SAA7115			(1 << 1)
-#define IVTV_HW_SAA7127			(1 << 2)
-#define IVTV_HW_MSP34XX			(1 << 3)
-#define IVTV_HW_TUNER			(1 << 4)
-#define IVTV_HW_WM8775			(1 << 5)
-#define IVTV_HW_CS53L32A		(1 << 6)
-#define IVTV_HW_TVEEPROM		(1 << 7)
-#define IVTV_HW_SAA7114			(1 << 8)
-#define IVTV_HW_UPD64031A		(1 << 9)
-#define IVTV_HW_UPD6408X		(1 << 10)
-#define IVTV_HW_SAA717X			(1 << 11)
-#define IVTV_HW_WM8739			(1 << 12)
-#define IVTV_HW_VP27SMPX		(1 << 13)
-#define IVTV_HW_M52790			(1 << 14)
-#define IVTV_HW_GPIO			(1 << 15)
-#define IVTV_HW_I2C_IR_RX_AVER		(1 << 16)
-#define IVTV_HW_I2C_IR_RX_HAUP_EXT	(1 << 17) /* External before internal */
-#define IVTV_HW_I2C_IR_RX_HAUP_INT	(1 << 18)
-#define IVTV_HW_Z8F0811_IR_HAUP		(1 << 19)
-#define IVTV_HW_I2C_IR_RX_ADAPTEC	(1 << 20)
+enum ivtv_hw_bits {
+	IVTV_HW_BIT_CX25840,
+	IVTV_HW_BIT_SAA7115,
+	IVTV_HW_BIT_SAA7127,
+	IVTV_HW_BIT_MSP34XX,
+	IVTV_HW_BIT_TUNER,
+	IVTV_HW_BIT_WM8775,
+	IVTV_HW_BIT_CS53L32A,
+	IVTV_HW_BIT_TVEEPROM,
+	IVTV_HW_BIT_SAA7114,
+	IVTV_HW_BIT_UPD64031A,
+	IVTV_HW_BIT_UPD6408X,
+	IVTV_HW_BIT_SAA717X,
+	IVTV_HW_BIT_WM8739,
+	IVTV_HW_BIT_VP27SMPX,
+	IVTV_HW_BIT_M52790,
+	IVTV_HW_BIT_GPIO,
+	IVTV_HW_BIT_I2C_IR_RX_AVER,
+	IVTV_HW_BIT_I2C_IR_RX_HAUP_EXT,		 /* External before internal */
+	IVTV_HW_BIT_I2C_IR_RX_HAUP_INT,
+	IVTV_HW_BIT_Z8F0811_IR_HAUP,
+	IVTV_HW_BIT_I2C_IR_RX_ADAPTEC,
+
+	IVTV_HW_MAX_BITS	/* Should be the last one */
+};
+
+#define IVTV_HW_CX25840			BIT(IVTV_HW_BIT_CX25840)
+#define IVTV_HW_SAA7115			BIT(IVTV_HW_BIT_SAA7115)
+#define IVTV_HW_SAA7127			BIT(IVTV_HW_BIT_SAA7127)
+#define IVTV_HW_MSP34XX			BIT(IVTV_HW_BIT_MSP34XX)
+#define IVTV_HW_TUNER			BIT(IVTV_HW_BIT_TUNER)
+#define IVTV_HW_WM8775			BIT(IVTV_HW_BIT_WM8775)
+#define IVTV_HW_CS53L32A		BIT(IVTV_HW_BIT_CS53L32A)
+#define IVTV_HW_TVEEPROM		BIT(IVTV_HW_BIT_TVEEPROM)
+#define IVTV_HW_SAA7114			BIT(IVTV_HW_BIT_SAA7114)
+#define IVTV_HW_UPD64031A		BIT(IVTV_HW_BIT_UPD64031A)
+#define IVTV_HW_UPD6408X		BIT(IVTV_HW_BIT_UPD6408X)
+#define IVTV_HW_SAA717X			BIT(IVTV_HW_BIT_SAA717X)
+#define IVTV_HW_WM8739			BIT(IVTV_HW_BIT_WM8739)
+#define IVTV_HW_VP27SMPX		BIT(IVTV_HW_BIT_VP27SMPX)
+#define IVTV_HW_M52790			BIT(IVTV_HW_BIT_M52790)
+#define IVTV_HW_GPIO			BIT(IVTV_HW_BIT_GPIO)
+#define IVTV_HW_I2C_IR_RX_AVER		BIT(IVTV_HW_BIT_I2C_IR_RX_AVER)
+#define IVTV_HW_I2C_IR_RX_HAUP_EXT	BIT(IVTV_HW_BIT_I2C_IR_RX_HAUP_EXT)
+#define IVTV_HW_I2C_IR_RX_HAUP_INT	BIT(IVTV_HW_BIT_I2C_IR_RX_HAUP_INT)
+#define IVTV_HW_Z8F0811_IR_HAUP		BIT(IVTV_HW_BIT_Z8F0811_IR_HAUP)
+#define IVTV_HW_I2C_IR_RX_ADAPTEC	BIT(IVTV_HW_BIT_I2C_IR_RX_ADAPTEC)
 
 #define IVTV_HW_SAA711X   (IVTV_HW_SAA7115 | IVTV_HW_SAA7114)
 

drivers/media/pci/ivtv/ivtv-i2c.c

@@ -85,7 +85,7 @@
 #define IVTV_ADAPTEC_IR_ADDR		0x6b
 
 /* This array should match the IVTV_HW_ defines */
-static const u8 hw_addrs[] = {
+static const u8 hw_addrs[IVTV_HW_MAX_BITS] = {
 	IVTV_CX25840_I2C_ADDR,
 	IVTV_SAA7115_I2C_ADDR,
 	IVTV_SAA7127_I2C_ADDR,
@@ -110,7 +110,7 @@ static const u8 hw_addrs[] = {
 };
 
 /* This array should match the IVTV_HW_ defines */
-static const char * const hw_devicenames[] = {
+static const char * const hw_devicenames[IVTV_HW_MAX_BITS] = {
 	"cx25840",
 	"saa7115",
 	"saa7127_auto",	/* saa7127 or saa7129 */
@@ -240,10 +240,16 @@ void ivtv_i2c_new_ir_legacy(struct ivtv *itv)
 
 int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
 {
-	struct v4l2_subdev *sd;
 	struct i2c_adapter *adap = &itv->i2c_adap;
-	const char *type = hw_devicenames[idx];
-	u32 hw = 1 << idx;
+	struct v4l2_subdev *sd;
+	const char *type;
+	u32 hw;
+
+	if (idx >= IVTV_HW_MAX_BITS)
+		return -ENODEV;
+
+	type = hw_devicenames[idx];
+	hw = 1 << idx;
 
 	if (hw == IVTV_HW_TUNER) {
 		/* special tuner handling */

drivers/media/pci/saa7134/saa7134-alsa.c

@@ -1215,15 +1215,13 @@ static int alsa_device_exit(struct saa7134_dev *dev)
 static int saa7134_alsa_init(void)
 {
 	struct saa7134_dev *dev = NULL;
-	struct list_head *list;
 
 	saa7134_dmasound_init = alsa_device_init;
 	saa7134_dmasound_exit = alsa_device_exit;
 
 	pr_info("saa7134 ALSA driver for DMA sound loaded\n");
 
-	list_for_each(list,&saa7134_devlist) {
-		dev = list_entry(list, struct saa7134_dev, devlist);
+	list_for_each_entry(dev, &saa7134_devlist, devlist) {
 		if (dev->pci->device == PCI_DEVICE_ID_PHILIPS_SAA7130)
 			pr_info("%s/alsa: %s doesn't support digital audio\n",
 				dev->name, saa7134_boards[dev->board].name);

drivers/media/pci/saa7134/saa7134-core.c

@@ -223,7 +223,8 @@ int saa7134_pgtable_alloc(struct pci_dev *pci, struct saa7134_pgtable *pt)
 	__le32       *cpu;
 	dma_addr_t   dma_addr = 0;
 
-	cpu = pci_alloc_consistent(pci, SAA7134_PGTABLE_SIZE, &dma_addr);
+	cpu = dma_alloc_coherent(&pci->dev, SAA7134_PGTABLE_SIZE, &dma_addr,
+				 GFP_KERNEL);
 	if (NULL == cpu)
 		return -ENOMEM;
 	pt->size = SAA7134_PGTABLE_SIZE;
@@ -254,7 +255,7 @@ void saa7134_pgtable_free(struct pci_dev *pci, struct saa7134_pgtable *pt)
 {
 	if (NULL == pt->cpu)
 		return;
-	pci_free_consistent(pci, pt->size, pt->cpu, pt->dma);
+	dma_free_coherent(&pci->dev, pt->size, pt->cpu, pt->dma);
 	pt->cpu = NULL;
 }
 
@@ -1092,7 +1093,7 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
 		dev->pci_lat,
 		(unsigned long long)pci_resource_start(pci_dev, 0));
 	pci_set_master(pci_dev);
-	err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
+	err = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32));
 	if (err) {
 		pr_warn("%s: Oops: no 32bit PCI DMA ???\n", dev->name);
 		goto err_v4l2_unregister;

drivers/media/pci/saa7164/saa7164-cmd.c

@@ -549,9 +549,6 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command,
 		/* See of other commands are on the bus */
 		if (saa7164_cmd_dequeue(dev) != SAA_OK)
 			printk(KERN_ERR "dequeue(3) failed\n");
-
-		continue;
-
 	} /* (loop) */
 
 	/* Release the sequence number allocation */

drivers/media/pci/tw5864/tw5864-reg.h

@@ -663,7 +663,7 @@
 #define TW5864_SYNC 0x8008
 /* Define controls in register TW5864_SYNC */
 /*
- * 0 vlc stream to syncrous port
+ * 0 vlc stream to synchronous port
  * 1 vlc stream to ddr buffers
  */
 #define TW5864_SYNC_CFG BIT(7)

drivers/media/platform/atmel/atmel-sama5d2-isc.c

@@ -255,6 +255,23 @@ static void isc_sama5d2_config_rlp(struct isc_device *isc)
 	struct regmap *regmap = isc->regmap;
 	u32 rlp_mode = isc->config.rlp_cfg_mode;
 
+	/*
+	 * In sama5d2, the YUV planar modes and the YUYV modes are treated
+	 * in the same way in RLP register.
+	 * Normally, YYCC mode should be Luma(n) - Color B(n) - Color R (n)
+	 * and YCYC should be Luma(n + 1) - Color B (n) - Luma (n) - Color R (n)
+	 * but in sama5d2, the YCYC mode does not exist, and YYCC must be
+	 * selected for both planar and interleaved modes, as in fact
+	 * both modes are supported.
+	 *
+	 * Thus, if the YCYC mode is selected, replace it with the
+	 * sama5d2-compliant mode which is YYCC .
+	 */
+	if ((rlp_mode & ISC_RLP_CFG_MODE_YCYC) == ISC_RLP_CFG_MODE_YCYC) {
+		rlp_mode &= ~ISC_RLP_CFG_MODE_MASK;
+		rlp_mode |= ISC_RLP_CFG_MODE_YYCC;
+	}
+
 	regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
 			   ISC_RLP_CFG_MODE_MASK, rlp_mode);
 }

drivers/media/platform/coda/coda-bit.c

@@ -2053,17 +2053,25 @@ static int __coda_start_decoding(struct coda_ctx *ctx)
 	u32 src_fourcc, dst_fourcc;
 	int ret;
 
-	if (!ctx->initialized) {
-		ret = __coda_decoder_seq_init(ctx);
-		if (ret < 0)
-			return ret;
-	}
-
 	q_data_src = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_OUTPUT);
 	q_data_dst = get_q_data(ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
 	src_fourcc = q_data_src->fourcc;
 	dst_fourcc = q_data_dst->fourcc;
 
+	if (!ctx->initialized) {
+		ret = __coda_decoder_seq_init(ctx);
+		if (ret < 0)
+			return ret;
+	} else {
+		ctx->frame_mem_ctrl &= ~(CODA_FRAME_CHROMA_INTERLEAVE | (0x3 << 9) |
+					 CODA9_FRAME_TILED2LINEAR);
+		if (dst_fourcc == V4L2_PIX_FMT_NV12 || dst_fourcc == V4L2_PIX_FMT_YUYV)
+			ctx->frame_mem_ctrl |= CODA_FRAME_CHROMA_INTERLEAVE;
+		if (ctx->tiled_map_type == GDI_TILED_FRAME_MB_RASTER_MAP)
+			ctx->frame_mem_ctrl |= (0x3 << 9) |
+				((ctx->use_vdoa) ? 0 : CODA9_FRAME_TILED2LINEAR);
+	}
+
 	coda_write(dev, ctx->parabuf.paddr, CODA_REG_BIT_PARA_BUF_ADDR);
 
 	ret = coda_alloc_framebuffers(ctx, q_data_dst, src_fourcc);

drivers/media/platform/davinci/vpfe_capture.c

@@ -189,7 +189,7 @@ int vpfe_register_ccdc_device(const struct ccdc_hw_device *dev)
 	if (!ccdc_cfg) {
 		/*
 		 * TODO. Will this ever happen? if so, we need to fix it.
-		 * Proabably we need to add the request to a linked list and
+		 * Probably we need to add the request to a linked list and
 		 * walk through it during vpfe probe
 		 */
 		printk(KERN_ERR "vpfe capture not initialized\n");

drivers/media/platform/exynos4-is/media-dev.c

@@ -1238,8 +1238,8 @@ static const struct media_device_ops fimc_md_ops = {
 	.link_notify = fimc_md_link_notify,
 };
 
-static ssize_t fimc_md_sysfs_show(struct device *dev,
-				  struct device_attribute *attr, char *buf)
+static ssize_t subdev_conf_mode_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
 {
 	struct fimc_md *fmd = dev_get_drvdata(dev);
 
@@ -1249,9 +1249,9 @@ static ssize_t fimc_md_sysfs_show(struct device *dev,
 	return strscpy(buf, "V4L2 video node only API (vid-dev)\n", PAGE_SIZE);
 }
 
-static ssize_t fimc_md_sysfs_store(struct device *dev,
-				   struct device_attribute *attr,
-				   const char *buf, size_t count)
+static ssize_t subdev_conf_mode_store(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
 {
 	struct fimc_md *fmd = dev_get_drvdata(dev);
 	bool subdev_api;
@@ -1278,8 +1278,7 @@ static ssize_t fimc_md_sysfs_store(struct device *dev,
  *  sub-dev - for media controller API, subdevs must be configured in user
  *  space before starting streaming.
  */
-static DEVICE_ATTR(subdev_conf_mode, S_IWUSR | S_IRUGO,
-		   fimc_md_sysfs_show, fimc_md_sysfs_store);
+static DEVICE_ATTR_RW(subdev_conf_mode);
 
 static int cam_clk_prepare(struct clk_hw *hw)
 {

drivers/media/platform/marvell-ccic/mcam-core.c

@@ -692,7 +692,7 @@ static void mcam_dma_sg_done(struct mcam_camera *cam, int frame)
  * Scatter/gather mode requires stopping the controller between
  * frames so we can put in a new DMA descriptor array.  If no new
  * buffer exists at frame completion, the controller is left stopped;
- * this function is charged with gettig things going again.
+ * this function is charged with getting things going again.
  */
 static void mcam_sg_restart(struct mcam_camera *cam)
 {

drivers/media/platform/omap3isp/isp.c

@@ -2037,8 +2037,10 @@ static int isp_subdev_notifier_complete(struct v4l2_async_notifier *async)
 	mutex_lock(&isp->media_dev.graph_mutex);
 
 	ret = media_entity_enum_init(&isp->crashed, &isp->media_dev);
-	if (ret)
+	if (ret) {
+		mutex_unlock(&isp->media_dev.graph_mutex);
 		return ret;
+	}
 
 	list_for_each_entry(sd, &v4l2_dev->subdevs, list) {
 		if (sd->notifier != &isp->notifier)

drivers/media/platform/qcom/venus/core.h

@@ -234,6 +234,7 @@ struct venc_controls {
 	u32 h264_loop_filter_mode;
 	s32 h264_loop_filter_alpha;
 	s32 h264_loop_filter_beta;
+	u32 h264_8x8_transform;
 
 	u32 hevc_i_qp;
 	u32 hevc_p_qp;
@@ -256,6 +257,7 @@ struct venc_controls {
 
 	u32 header_mode;
 	bool aud_enable;
+	u32 intra_refresh_period;
 
 	struct {
 		u32 h264;

drivers/media/platform/qcom/venus/helpers.c

@@ -1137,6 +1137,9 @@ int venus_helper_set_format_constraints(struct venus_inst *inst)
 	if (!IS_V6(inst->core))
 		return 0;
 
+	if (inst->opb_fmt == HFI_COLOR_FORMAT_NV12_UBWC)
+		return 0;
+
 	pconstraint.buffer_type = HFI_BUFFER_OUTPUT2;
 	pconstraint.num_planes = 2;
 	pconstraint.plane_format[0].stride_multiples = 128;

drivers/media/platform/qcom/venus/hfi_cmds.c

@@ -1239,6 +1239,14 @@ pkt_session_set_property_4xx(struct hfi_session_set_property_pkt *pkt,
 		break;
 	}
 
+	case HFI_PROPERTY_PARAM_VENC_H264_TRANSFORM_8X8: {
+		struct hfi_h264_8x8_transform *in = pdata, *tm = prop_data;
+
+		tm->enable_type = in->enable_type;
+		pkt->shdr.hdr.size += sizeof(u32) + sizeof(*tm);
+		break;
+	}
+
 	case HFI_PROPERTY_CONFIG_VENC_MAX_BITRATE:
 	case HFI_PROPERTY_CONFIG_VDEC_POST_LOOP_DEBLOCKER:
 	case HFI_PROPERTY_PARAM_BUFFER_ALLOC_MODE:

drivers/media/platform/qcom/venus/hfi_helper.h

@@ -507,6 +507,7 @@
 #define HFI_PROPERTY_PARAM_VENC_MAX_NUM_B_FRAMES		0x2005020
 #define HFI_PROPERTY_PARAM_VENC_H264_VUI_BITSTREAM_RESTRC	0x2005021
 #define HFI_PROPERTY_PARAM_VENC_PRESERVE_TEXT_QUALITY		0x2005023
+#define HFI_PROPERTY_PARAM_VENC_H264_TRANSFORM_8X8			0x2005025
 #define HFI_PROPERTY_PARAM_VENC_HIER_P_MAX_NUM_ENH_LAYER	0x2005026
 #define HFI_PROPERTY_PARAM_VENC_DISABLE_RC_TIMESTAMP		0x2005027
 #define HFI_PROPERTY_PARAM_VENC_INITIAL_QP			0x2005028
@@ -562,6 +563,10 @@ struct hfi_bitrate {
 	u32 layer_id;
 };
 
+struct hfi_h264_8x8_transform {
+	u32 enable_type;
+};
+
 #define HFI_CAPABILITY_FRAME_WIDTH			0x01
 #define HFI_CAPABILITY_FRAME_HEIGHT			0x02
 #define HFI_CAPABILITY_MBS_PER_FRAME			0x03

drivers/media/platform/qcom/venus/hfi_msgs.c

@@ -261,7 +261,7 @@ sys_get_prop_image_version(struct device *dev,
 
 	smem_tbl_ptr = qcom_smem_get(QCOM_SMEM_HOST_ANY,
 		SMEM_IMG_VER_TBL, &smem_blk_sz);
-	if (smem_tbl_ptr && smem_blk_sz >= SMEM_IMG_OFFSET_VENUS + VER_STR_SZ)
+	if (!IS_ERR(smem_tbl_ptr) && smem_blk_sz >= SMEM_IMG_OFFSET_VENUS + VER_STR_SZ)
 		memcpy(smem_tbl_ptr + SMEM_IMG_OFFSET_VENUS,
 		       img_ver, VER_STR_SZ);
 }

drivers/media/platform/qcom/venus/venc.c

@@ -183,6 +183,8 @@ venc_try_fmt_common(struct venus_inst *inst, struct v4l2_format *f)
 		else
 			return NULL;
 		fmt = find_format(inst, pixmp->pixelformat, f->type);
+		if (!fmt)
+			return NULL;
 	}
 
 	pixmp->width = clamp(pixmp->width, frame_width_min(inst),
@@ -547,6 +549,7 @@ static int venc_set_properties(struct venus_inst *inst)
 	struct hfi_quantization_range quant_range;
 	struct hfi_enable en;
 	struct hfi_ltr_mode ltr_mode;
+	struct hfi_intra_refresh intra_refresh = {};
 	u32 ptype, rate_control, bitrate;
 	u32 profile, level;
 	int ret;
@@ -567,6 +570,7 @@ static int venc_set_properties(struct venus_inst *inst)
 		struct hfi_h264_vui_timing_info info;
 		struct hfi_h264_entropy_control entropy;
 		struct hfi_h264_db_control deblock;
+		struct hfi_h264_8x8_transform h264_transform;
 
 		ptype = HFI_PROPERTY_PARAM_VENC_H264_VUI_TIMING_INFO;
 		info.enable = 1;
@@ -597,6 +601,17 @@ static int venc_set_properties(struct venus_inst *inst)
 		ret = hfi_session_set_property(inst, ptype, &deblock);
 		if (ret)
 			return ret;
+
+		ptype = HFI_PROPERTY_PARAM_VENC_H264_TRANSFORM_8X8;
+		h264_transform.enable_type = 0;
+		if (ctr->profile.h264 == HFI_H264_PROFILE_HIGH ||
+		    ctr->profile.h264 == HFI_H264_PROFILE_CONSTRAINED_HIGH)
+			h264_transform.enable_type = ctr->h264_8x8_transform;
+
+		ret = hfi_session_set_property(inst, ptype, &h264_transform);
+		if (ret)
+			return ret;
+
 	}
 
 	if (inst->fmt_cap->pixfmt == V4L2_PIX_FMT_H264 ||
@@ -802,6 +817,31 @@ static int venc_set_properties(struct venus_inst *inst)
 			en.enable = 1;
 
 		ret = hfi_session_set_property(inst, ptype, &en);
+	}
+
+	if ((inst->fmt_cap->pixfmt == V4L2_PIX_FMT_H264 ||
+	     inst->fmt_cap->pixfmt == V4L2_PIX_FMT_HEVC) &&
+	    (rate_control == HFI_RATE_CONTROL_CBR_VFR ||
+	     rate_control == HFI_RATE_CONTROL_CBR_CFR)) {
+		intra_refresh.mode = HFI_INTRA_REFRESH_NONE;
+		intra_refresh.cir_mbs = 0;
+
+		if (ctr->intra_refresh_period) {
+			u32 mbs;
+
+			mbs = ALIGN(inst->width, 16) * ALIGN(inst->height, 16);
+			mbs /= 16 * 16;
+			if (mbs % ctr->intra_refresh_period)
+				mbs++;
+			mbs /= ctr->intra_refresh_period;
+
+			intra_refresh.mode = HFI_INTRA_REFRESH_RANDOM;
+			intra_refresh.cir_mbs = mbs;
+		}
+
+		ptype = HFI_PROPERTY_PARAM_VENC_INTRA_REFRESH;
+
+		ret = hfi_session_set_property(inst, ptype, &intra_refresh);
 		if (ret)
 			return ret;
 	}

drivers/media/platform/qcom/venus/venc_ctrls.c

@@ -17,7 +17,6 @@
 #define SLICE_BYTE_SIZE_MAX	1024
 #define SLICE_BYTE_SIZE_MIN	1024
 #define SLICE_MB_SIZE_MAX	300
-#define INTRA_REFRESH_MBS_MAX	300
 #define AT_SLICE_BOUNDARY	\
 	V4L2_MPEG_VIDEO_H264_LOOP_FILTER_MODE_DISABLED_AT_SLICE_BOUNDARY
 #define MAX_LTR_FRAME_COUNT 4
@@ -227,8 +226,6 @@ static int venc_op_s_ctrl(struct v4l2_ctrl *ctrl)
 		}
 		mutex_unlock(&inst->lock);
 		break;
-	case V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB:
-		break;
 	case V4L2_CID_MPEG_VIDEO_GOP_SIZE:
 		ret = venc_calc_bpframes(ctrl->val, ctr->num_b_frames, &bframes,
 					 &ctr->num_p_frames);
@@ -319,6 +316,28 @@ static int venc_op_s_ctrl(struct v4l2_ctrl *ctrl)
 	case V4L2_CID_COLORIMETRY_HDR10_MASTERING_DISPLAY:
 		ctr->mastering = *ctrl->p_new.p_hdr10_mastering;
 		break;
+	case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD:
+		ctr->intra_refresh_period = ctrl->val;
+		break;
+	case V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM:
+		if (ctr->profile.h264 != HFI_H264_PROFILE_HIGH &&
+		    ctr->profile.h264 != HFI_H264_PROFILE_CONSTRAINED_HIGH)
+			return -EINVAL;
+
+		/*
+		 * In video firmware, 8x8 transform is supported only for
+		 * high profile(HP) and constrained high profile(CHP).
+		 * If client wants to disable 8x8 transform for HP/CHP,
+		 * it is better to set profile as main profile(MP).
+		 * Because there is no difference between HP and MP
+		 * if we disable 8x8 transform for HP.
+		 */
+
+		if (ctrl->val == 0)
+			return -EINVAL;
+
+		ctr->h264_8x8_transform = ctrl->val;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -334,7 +353,7 @@ int venc_ctrl_init(struct venus_inst *inst)
 {
 	int ret;
 
-	ret = v4l2_ctrl_handler_init(&inst->ctrl_handler, 57);
+	ret = v4l2_ctrl_handler_init(&inst->ctrl_handler, 58);
 	if (ret)
 		return ret;
 
@@ -437,6 +456,9 @@ int venc_ctrl_init(struct venus_inst *inst)
 	v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
 			  V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP, 1, 51, 1, 1);
 
+	v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
+			  V4L2_CID_MPEG_VIDEO_H264_8X8_TRANSFORM, 0, 1, 1, 0);
+
 	v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
 			  V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP, 1, 51, 1, 1);
 
@@ -502,10 +524,6 @@ int venc_ctrl_init(struct venus_inst *inst)
 	v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
 		V4L2_CID_MPEG_VIDEO_H264_LOOP_FILTER_BETA, -6, 6, 1, 0);
 
-	v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
-		V4L2_CID_MPEG_VIDEO_CYCLIC_INTRA_REFRESH_MB,
-		0, INTRA_REFRESH_MBS_MAX, 1, 0);
-
 	v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
 		V4L2_CID_MPEG_VIDEO_GOP_SIZE, 0, (1 << 16) - 1, 1, 30);
 
@@ -564,6 +582,10 @@ int venc_ctrl_init(struct venus_inst *inst)
 				   V4L2_CID_COLORIMETRY_HDR10_MASTERING_DISPLAY,
 				   v4l2_ctrl_ptr_create(NULL));
 
+	v4l2_ctrl_new_std(&inst->ctrl_handler, &venc_ctrl_ops,
+			  V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD, 0,
+			  ((4096 * 2304) >> 8), 1, 0);
+
 	ret = inst->ctrl_handler.error;
 	if (ret)
 		goto err;

drivers/media/platform/rcar-vin/rcar-v4l2.c

@@ -253,8 +253,8 @@ static int rvin_try_format(struct rvin_dev *vin, u32 which,
 	int ret;
 
 	sd_state = v4l2_subdev_alloc_state(sd);
-	if (sd_state == NULL)
-		return -ENOMEM;
+	if (IS_ERR(sd_state))
+		return PTR_ERR(sd_state);
 
 	if (!rvin_format_from_pixel(vin, pix->pixelformat))
 		pix->pixelformat = RVIN_DEFAULT_FORMAT;

drivers/media/platform/rockchip/rga/rga.c

@@ -863,12 +863,12 @@ static int rga_probe(struct platform_device *pdev)
 	if (IS_ERR(rga->m2m_dev)) {
 		v4l2_err(&rga->v4l2_dev, "Failed to init mem2mem device\n");
 		ret = PTR_ERR(rga->m2m_dev);
-		goto unreg_video_dev;
+		goto rel_vdev;
 	}
 
 	ret = pm_runtime_resume_and_get(rga->dev);
 	if (ret < 0)
-		goto unreg_video_dev;
+		goto rel_vdev;
 
 	rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
 	rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;
@@ -882,11 +882,23 @@ static int rga_probe(struct platform_device *pdev)
 	rga->cmdbuf_virt = dma_alloc_attrs(rga->dev, RGA_CMDBUF_SIZE,
 					   &rga->cmdbuf_phy, GFP_KERNEL,
 					   DMA_ATTR_WRITE_COMBINE);
+	if (!rga->cmdbuf_virt) {
+		ret = -ENOMEM;
+		goto rel_vdev;
+	}
 
 	rga->src_mmu_pages =
 		(unsigned int *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 3);
+	if (!rga->src_mmu_pages) {
+		ret = -ENOMEM;
+		goto free_dma;
+	}
 	rga->dst_mmu_pages =
 		(unsigned int *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 3);
+	if (rga->dst_mmu_pages) {
+		ret = -ENOMEM;
+		goto free_src_pages;
+	}
 
 	def_frame.stride = (def_frame.width * def_frame.fmt->depth) >> 3;
 	def_frame.size = def_frame.stride * def_frame.height;
@@ -894,7 +906,7 @@ static int rga_probe(struct platform_device *pdev)
 	ret = video_register_device(vfd, VFL_TYPE_VIDEO, -1);
 	if (ret) {
 		v4l2_err(&rga->v4l2_dev, "Failed to register video device\n");
-		goto rel_vdev;
+		goto free_dst_pages;
 	}
 
 	v4l2_info(&rga->v4l2_dev, "Registered %s as /dev/%s\n",
@@ -902,10 +914,15 @@ static int rga_probe(struct platform_device *pdev)
 
 	return 0;
 
+free_dst_pages:
+	free_pages((unsigned long)rga->dst_mmu_pages, 3);
+free_src_pages:
+	free_pages((unsigned long)rga->src_mmu_pages, 3);
+free_dma:
+	dma_free_attrs(rga->dev, RGA_CMDBUF_SIZE, rga->cmdbuf_virt,
+		       rga->cmdbuf_phy, DMA_ATTR_WRITE_COMBINE);
 rel_vdev:
 	video_device_release(vfd);
-unreg_video_dev:
-	video_unregister_device(rga->vfd);
 unreg_v4l2_dev:
 	v4l2_device_unregister(&rga->v4l2_dev);
 err_put_clk:

drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c

@@ -750,7 +750,7 @@ static int rkisp1_vb2_queue_setup(struct vb2_queue *queue,
 	return 0;
 }
 
-static void rkisp1_vb2_buf_queue(struct vb2_buffer *vb)
+static int rkisp1_vb2_buf_init(struct vb2_buffer *vb)
 {
 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
 	struct rkisp1_buffer *ispbuf =
@@ -780,6 +780,15 @@ static void rkisp1_vb2_buf_queue(struct vb2_buffer *vb)
 	if (cap->pix.info->comp_planes == 3 && cap->pix.cfg->uv_swap)
 		swap(ispbuf->buff_addr[RKISP1_PLANE_CR],
 		     ispbuf->buff_addr[RKISP1_PLANE_CB]);
+	return 0;
+}
+
+static void rkisp1_vb2_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct rkisp1_buffer *ispbuf =
+		container_of(vbuf, struct rkisp1_buffer, vb);
+	struct rkisp1_capture *cap = vb->vb2_queue->drv_priv;
 
 	spin_lock_irq(&cap->buf.lock);
 	list_add_tail(&ispbuf->queue, &cap->buf.queue);
@@ -1039,6 +1048,7 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
 
 static const struct vb2_ops rkisp1_vb2_ops = {
 	.queue_setup = rkisp1_vb2_queue_setup,
+	.buf_init = rkisp1_vb2_buf_init,
 	.buf_queue = rkisp1_vb2_buf_queue,
 	.buf_prepare = rkisp1_vb2_buf_prepare,
 	.wait_prepare = vb2_ops_wait_prepare,

drivers/media/platform/rockchip/rkisp1/rkisp1-common.h

@@ -156,15 +156,11 @@ struct rkisp1_vdev_node {
  * @vb:		vb2 buffer
  * @queue:	entry of the buffer in the queue
  * @buff_addr:	dma addresses of each plane, used only by the capture devices: selfpath, mainpath
- * @vaddr:	virtual address for buffers used by params and stats devices
  */
 struct rkisp1_buffer {
 	struct vb2_v4l2_buffer vb;
 	struct list_head queue;
-	union {
-		u32 buff_addr[VIDEO_MAX_PLANES];
-		void *vaddr;
-	};
+	u32 buff_addr[VIDEO_MAX_PLANES];
 };
 
 /*

drivers/media/platform/rockchip/rkisp1/rkisp1-params.c

@@ -1143,7 +1143,7 @@ static void rkisp1_params_apply_params_cfg(struct rkisp1_params *params,
 	cur_buf = list_first_entry(&params->params,
 				   struct rkisp1_buffer, queue);
 
-	new_params = (struct rkisp1_params_cfg *)(cur_buf->vaddr);
+	new_params = (struct rkisp1_params_cfg *)vb2_plane_vaddr(&cur_buf->vb.vb2_buf, 0);
 
 	rkisp1_isp_isr_other_config(params, new_params);
 	rkisp1_isp_isr_meas_config(params, new_params);
@@ -1382,7 +1382,6 @@ static void rkisp1_params_vb2_buf_queue(struct vb2_buffer *vb)
 	struct vb2_queue *vq = vb->vb2_queue;
 	struct rkisp1_params *params = vq->drv_priv;
 
-	params_buf->vaddr = vb2_plane_vaddr(vb, 0);
 	spin_lock_irq(&params->config_lock);
 	list_add_tail(&params_buf->queue, &params->params);
 	spin_unlock_irq(&params->config_lock);

drivers/media/platform/rockchip/rkisp1/rkisp1-stats.c

@@ -112,7 +112,6 @@ static void rkisp1_stats_vb2_buf_queue(struct vb2_buffer *vb)
 	struct vb2_queue *vq = vb->vb2_queue;
 	struct rkisp1_stats *stats_dev = vq->drv_priv;
 
-	stats_buf->vaddr = vb2_plane_vaddr(vb, 0);
 
 	spin_lock_irq(&stats_dev->lock);
 	list_add_tail(&stats_buf->queue, &stats_dev->stat);
@@ -305,9 +304,8 @@ rkisp1_stats_send_measurement(struct rkisp1_stats *stats, u32 isp_ris)
 	if (!cur_buf)
 		return;
 
-	cur_stat_buf =
-		(struct rkisp1_stat_buffer *)(cur_buf->vaddr);
-
+	cur_stat_buf = (struct rkisp1_stat_buffer *)
+			vb2_plane_vaddr(&cur_buf->vb.vb2_buf, 0);
 	if (isp_ris & RKISP1_CIF_ISP_AWB_DONE)
 		rkisp1_stats_get_awb_meas(stats, cur_stat_buf);
 

drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c

@@ -1418,7 +1418,7 @@ static void s5p_mfc_try_run_v5(struct s5p_mfc_dev *dev)
 		if (test_and_clear_bit(0, &dev->hw_lock) == 0)
 			mfc_err("Failed to unlock hardware\n");
 
-		/* This is in deed imporant, as no operation has been
+		/* This is indeed important, as no operation has been
 		 * scheduled, reduce the clock count as no one will
 		 * ever do this, because no interrupt related to this try_run
 		 * will ever come from hardware. */

drivers/media/platform/sti/delta/delta-ipc.c

@@ -175,8 +175,7 @@ int delta_ipc_open(struct delta_ctx *pctx, const char *name,
 	msg.ipc_buf_size = ipc_buf_size;
 	msg.ipc_buf_paddr = ctx->ipc_buf->paddr;
 
-	memcpy(msg.name, name, sizeof(msg.name));
-	msg.name[sizeof(msg.name) - 1] = 0;
+	strscpy(msg.name, name, sizeof(msg.name));
 
 	msg.param_size = param->size;
 	memcpy(ctx->ipc_buf->vaddr, param->data, msg.param_size);

drivers/media/platform/ti-vpe/cal-camerarx.c

@@ -45,22 +45,30 @@ static inline void camerarx_write(struct cal_camerarx *phy, u32 offset, u32 val)
  * ------------------------------------------------------------------
  */
 
-static s64 cal_camerarx_get_external_rate(struct cal_camerarx *phy)
+static s64 cal_camerarx_get_ext_link_freq(struct cal_camerarx *phy)
 {
-	struct v4l2_ctrl *ctrl;
-	s64 rate;
+	struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 = &phy->endpoint.bus.mipi_csi2;
+	u32 num_lanes = mipi_csi2->num_data_lanes;
+	const struct cal_format_info *fmtinfo;
+	u32 bpp;
+	s64 freq;
 
-	ctrl = v4l2_ctrl_find(phy->sensor->ctrl_handler, V4L2_CID_PIXEL_RATE);
-	if (!ctrl) {
-		phy_err(phy, "no pixel rate control in subdev: %s\n",
-			phy->sensor->name);
-		return -EPIPE;
+	fmtinfo = cal_format_by_code(phy->formats[CAL_CAMERARX_PAD_SINK].code);
+	if (!fmtinfo)
+		return -EINVAL;
+
+	bpp = fmtinfo->bpp;
+
+	freq = v4l2_get_link_freq(phy->source->ctrl_handler, bpp, 2 * num_lanes);
+	if (freq < 0) {
+		phy_err(phy, "failed to get link freq for subdev '%s'\n",
+			phy->source->name);
+		return freq;
 	}
 
-	rate = v4l2_ctrl_g_ctrl_int64(ctrl);
-	phy_dbg(3, phy, "sensor Pixel Rate: %llu\n", rate);
+	phy_dbg(3, phy, "Source Link Freq: %llu\n", freq);
 
-	return rate;
+	return freq;
 }
 
 static void cal_camerarx_lane_config(struct cal_camerarx *phy)
@@ -116,34 +124,19 @@ void cal_camerarx_disable(struct cal_camerarx *phy)
 #define TCLK_MISS	1
 #define TCLK_SETTLE	14
 
-static void cal_camerarx_config(struct cal_camerarx *phy, s64 external_rate)
+static void cal_camerarx_config(struct cal_camerarx *phy, s64 link_freq)
 {
 	unsigned int reg0, reg1;
 	unsigned int ths_term, ths_settle;
-	unsigned int csi2_ddrclk_khz;
-	struct v4l2_fwnode_bus_mipi_csi2 *mipi_csi2 =
-			&phy->endpoint.bus.mipi_csi2;
-	u32 num_lanes = mipi_csi2->num_data_lanes;
 
 	/* DPHY timing configuration */
 
-	/*
-	 * CSI-2 is DDR and we only count used lanes.
-	 *
-	 * csi2_ddrclk_khz = external_rate / 1000
-	 *		   / (2 * num_lanes) * phy->fmtinfo->bpp;
-	 */
-	csi2_ddrclk_khz = div_s64(external_rate * phy->fmtinfo->bpp,
-				  2 * num_lanes * 1000);
-
-	phy_dbg(1, phy, "csi2_ddrclk_khz: %d\n", csi2_ddrclk_khz);
-
 	/* THS_TERM: Programmed value = floor(20 ns/DDRClk period) */
-	ths_term = 20 * csi2_ddrclk_khz / 1000000;
+	ths_term = div_s64(20 * link_freq, 1000 * 1000 * 1000);
 	phy_dbg(1, phy, "ths_term: %d (0x%02x)\n", ths_term, ths_term);
 
 	/* THS_SETTLE: Programmed value = floor(105 ns/DDRClk period) + 4 */
-	ths_settle = (105 * csi2_ddrclk_khz / 1000000) + 4;
+	ths_settle = div_s64(105 * link_freq, 1000 * 1000 * 1000) + 4;
 	phy_dbg(1, phy, "ths_settle: %d (0x%02x)\n", ths_settle, ths_settle);
 
 	reg0 = camerarx_read(phy, CAL_CSI2_PHY_REG0);
@@ -240,24 +233,41 @@ static void cal_camerarx_enable_irqs(struct cal_camerarx *phy)
 		CAL_CSI2_COMPLEXIO_IRQ_FIFO_OVR_MASK |
 		CAL_CSI2_COMPLEXIO_IRQ_SHORT_PACKET_MASK |
 		CAL_CSI2_COMPLEXIO_IRQ_ECC_NO_CORRECTION_MASK;
+	const u32 vc_err_mask =
+		CAL_CSI2_VC_IRQ_CS_IRQ_MASK(0) |
+		CAL_CSI2_VC_IRQ_CS_IRQ_MASK(1) |
+		CAL_CSI2_VC_IRQ_CS_IRQ_MASK(2) |
+		CAL_CSI2_VC_IRQ_CS_IRQ_MASK(3) |
+		CAL_CSI2_VC_IRQ_ECC_CORRECTION_IRQ_MASK(0) |
+		CAL_CSI2_VC_IRQ_ECC_CORRECTION_IRQ_MASK(1) |
+		CAL_CSI2_VC_IRQ_ECC_CORRECTION_IRQ_MASK(2) |
+		CAL_CSI2_VC_IRQ_ECC_CORRECTION_IRQ_MASK(3);
 
-	/* Enable CIO error IRQs. */
+	/* Enable CIO & VC error IRQs. */
 	cal_write(phy->cal, CAL_HL_IRQENABLE_SET(0),
-		  CAL_HL_IRQ_CIO_MASK(phy->instance));
+		  CAL_HL_IRQ_CIO_MASK(phy->instance) |
+		  CAL_HL_IRQ_VC_MASK(phy->instance));
 	cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance),
 		  cio_err_mask);
+	cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(phy->instance),
+		  vc_err_mask);
 }
 
 static void cal_camerarx_disable_irqs(struct cal_camerarx *phy)
 {
 	/* Disable CIO error irqs */
 	cal_write(phy->cal, CAL_HL_IRQENABLE_CLR(0),
-		  CAL_HL_IRQ_CIO_MASK(phy->instance));
+		  CAL_HL_IRQ_CIO_MASK(phy->instance) |
+		  CAL_HL_IRQ_VC_MASK(phy->instance));
 	cal_write(phy->cal, CAL_CSI2_COMPLEXIO_IRQENABLE(phy->instance), 0);
+	cal_write(phy->cal, CAL_CSI2_VC_IRQENABLE(phy->instance), 0);
 }
 
 static void cal_camerarx_ppi_enable(struct cal_camerarx *phy)
 {
+	cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance),
+			1, CAL_CSI2_PPI_CTRL_ECC_EN_MASK);
+
 	cal_write_field(phy->cal, CAL_CSI2_PPI_CTRL(phy->instance),
 			1, CAL_CSI2_PPI_CTRL_IF_EN_MASK);
 }
@@ -270,16 +280,21 @@ static void cal_camerarx_ppi_disable(struct cal_camerarx *phy)
 
 static int cal_camerarx_start(struct cal_camerarx *phy)
 {
-	s64 external_rate;
+	s64 link_freq;
 	u32 sscounter;
 	u32 val;
 	int ret;
 
-	external_rate = cal_camerarx_get_external_rate(phy);
-	if (external_rate < 0)
-		return external_rate;
+	if (phy->enable_count > 0) {
+		phy->enable_count++;
+		return 0;
+	}
 
-	ret = v4l2_subdev_call(phy->sensor, core, s_power, 1);
+	link_freq = cal_camerarx_get_ext_link_freq(phy);
+	if (link_freq < 0)
+		return link_freq;
+
+	ret = v4l2_subdev_call(phy->source, core, s_power, 1);
 	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) {
 		phy_err(phy, "power on failed in subdev\n");
 		return ret;
@@ -311,7 +326,7 @@ static int cal_camerarx_start(struct cal_camerarx *phy)
 	 * 2. CSI PHY and link initialization sequence.
 	 *
 	 *    a. Deassert the CSI-2 PHY reset. Do not wait for reset completion
-	 *       at this point, as it requires the external sensor to send the
+	 *       at this point, as it requires the external source to send the
 	 *       CSI-2 HS clock.
 	 */
 	cal_write_field(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance),
@@ -325,7 +340,7 @@ static int cal_camerarx_start(struct cal_camerarx *phy)
 	camerarx_read(phy, CAL_CSI2_PHY_REG0);
 
 	/* Program the PHY timing parameters. */
-	cal_camerarx_config(phy, external_rate);
+	cal_camerarx_config(phy, link_freq);
 
 	/*
 	 *    b. Assert the FORCERXMODE signal.
@@ -370,12 +385,12 @@ static int cal_camerarx_start(struct cal_camerarx *phy)
 	cal_camerarx_power(phy, true);
 
 	/*
-	 * Start the sensor to enable the CSI-2 HS clock. We can now wait for
+	 * Start the source to enable the CSI-2 HS clock. We can now wait for
 	 * CSI-2 PHY reset to complete.
 	 */
-	ret = v4l2_subdev_call(phy->sensor, video, s_stream, 1);
+	ret = v4l2_subdev_call(phy->source, video, s_stream, 1);
 	if (ret) {
-		v4l2_subdev_call(phy->sensor, core, s_power, 0);
+		v4l2_subdev_call(phy->source, core, s_power, 0);
 		cal_camerarx_disable_irqs(phy);
 		phy_err(phy, "stream on failed in subdev\n");
 		return ret;
@@ -399,14 +414,18 @@ static int cal_camerarx_start(struct cal_camerarx *phy)
 	/* Finally, enable the PHY Protocol Interface (PPI). */
 	cal_camerarx_ppi_enable(phy);
 
+	phy->enable_count++;
+
 	return 0;
 }
 
 static void cal_camerarx_stop(struct cal_camerarx *phy)
 {
-	unsigned int i;
 	int ret;
 
+	if (--phy->enable_count > 0)
+		return;
+
 	cal_camerarx_ppi_disable(phy);
 
 	cal_camerarx_disable_irqs(phy);
@@ -418,27 +437,17 @@ static void cal_camerarx_stop(struct cal_camerarx *phy)
 			CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL,
 			CAL_CSI2_COMPLEXIO_CFG_RESET_CTRL_MASK);
 
-	/* Wait for power down completion */
-	for (i = 0; i < 10; i++) {
-		if (cal_read_field(phy->cal,
-				   CAL_CSI2_COMPLEXIO_CFG(phy->instance),
-				   CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_MASK) ==
-		    CAL_CSI2_COMPLEXIO_CFG_RESET_DONE_RESETONGOING)
-			break;
-		usleep_range(1000, 1100);
-	}
-	phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x Complex IO in Reset (%d) %s\n",
+	phy_dbg(3, phy, "CAL_CSI2_COMPLEXIO_CFG(%d) = 0x%08x Complex IO in Reset\n",
 		phy->instance,
-		cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)), i,
-		(i >= 10) ? "(timeout)" : "");
+		cal_read(phy->cal, CAL_CSI2_COMPLEXIO_CFG(phy->instance)));
 
 	/* Disable the phy */
 	cal_camerarx_disable(phy);
 
-	if (v4l2_subdev_call(phy->sensor, video, s_stream, 0))
+	if (v4l2_subdev_call(phy->source, video, s_stream, 0))
 		phy_err(phy, "stream off failed in subdev\n");
 
-	ret = v4l2_subdev_call(phy->sensor, core, s_power, 0);
+	ret = v4l2_subdev_call(phy->source, core, s_power, 0);
 	if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV)
 		phy_err(phy, "power off failed in subdev\n");
 }
@@ -558,16 +567,16 @@ static int cal_camerarx_parse_dt(struct cal_camerarx *phy)
 		endpoint->bus.mipi_csi2.flags);
 
 	/* Retrieve the connected device and store it for later use. */
-	phy->sensor_ep_node = of_graph_get_remote_endpoint(ep_node);
-	phy->sensor_node = of_graph_get_port_parent(phy->sensor_ep_node);
-	if (!phy->sensor_node) {
+	phy->source_ep_node = of_graph_get_remote_endpoint(ep_node);
+	phy->source_node = of_graph_get_port_parent(phy->source_ep_node);
+	if (!phy->source_node) {
 		phy_dbg(3, phy, "Can't get remote parent\n");
-		of_node_put(phy->sensor_ep_node);
+		of_node_put(phy->source_ep_node);
 		ret = -EINVAL;
 		goto done;
 	}
 
-	phy_dbg(1, phy, "Found connected device %pOFn\n", phy->sensor_node);
+	phy_dbg(1, phy, "Found connected device %pOFn\n", phy->source_node);
 
 done:
 	of_node_put(ep_node);
@@ -602,12 +611,18 @@ cal_camerarx_get_pad_format(struct cal_camerarx *phy,
 static int cal_camerarx_sd_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct cal_camerarx *phy = to_cal_camerarx(sd);
+	int ret = 0;
+
+	mutex_lock(&phy->mutex);
 
 	if (enable)
-		return cal_camerarx_start(phy);
+		ret = cal_camerarx_start(phy);
+	else
+		cal_camerarx_stop(phy);
 
-	cal_camerarx_stop(phy);
-	return 0;
+	mutex_unlock(&phy->mutex);
+
+	return ret;
 }
 
 static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd,
@@ -615,27 +630,36 @@ static int cal_camerarx_sd_enum_mbus_code(struct v4l2_subdev *sd,
 					  struct v4l2_subdev_mbus_code_enum *code)
 {
 	struct cal_camerarx *phy = to_cal_camerarx(sd);
+	int ret = 0;
+
+	mutex_lock(&phy->mutex);
 
 	/* No transcoding, source and sink codes must match. */
-	if (code->pad == CAL_CAMERARX_PAD_SOURCE) {
+	if (cal_rx_pad_is_source(code->pad)) {
 		struct v4l2_mbus_framefmt *fmt;
 
-		if (code->index > 0)
-			return -EINVAL;
+		if (code->index > 0) {
+			ret = -EINVAL;
+			goto out;
+		}
 
 		fmt = cal_camerarx_get_pad_format(phy, sd_state,
 						  CAL_CAMERARX_PAD_SINK,
 						  code->which);
 		code->code = fmt->code;
-		return 0;
+	} else {
+		if (code->index >= cal_num_formats) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		code->code = cal_formats[code->index].code;
 	}
 
-	if (code->index >= cal_num_formats)
-		return -EINVAL;
+out:
+	mutex_unlock(&phy->mutex);
 
-	code->code = cal_formats[code->index].code;
-
-	return 0;
+	return ret;
 }
 
 static int cal_camerarx_sd_enum_frame_size(struct v4l2_subdev *sd,
@@ -644,38 +668,46 @@ static int cal_camerarx_sd_enum_frame_size(struct v4l2_subdev *sd,
 {
 	struct cal_camerarx *phy = to_cal_camerarx(sd);
 	const struct cal_format_info *fmtinfo;
+	int ret = 0;
 
 	if (fse->index > 0)
 		return -EINVAL;
 
+	mutex_lock(&phy->mutex);
+
 	/* No transcoding, source and sink formats must match. */
-	if (fse->pad == CAL_CAMERARX_PAD_SOURCE) {
+	if (cal_rx_pad_is_source(fse->pad)) {
 		struct v4l2_mbus_framefmt *fmt;
 
 		fmt = cal_camerarx_get_pad_format(phy, sd_state,
 						  CAL_CAMERARX_PAD_SINK,
 						  fse->which);
-		if (fse->code != fmt->code)
-			return -EINVAL;
+		if (fse->code != fmt->code) {
+			ret = -EINVAL;
+			goto out;
+		}
 
 		fse->min_width = fmt->width;
 		fse->max_width = fmt->width;
 		fse->min_height = fmt->height;
 		fse->max_height = fmt->height;
+	} else {
+		fmtinfo = cal_format_by_code(fse->code);
+		if (!fmtinfo) {
+			ret = -EINVAL;
+			goto out;
+		}
 
-		return 0;
+		fse->min_width = CAL_MIN_WIDTH_BYTES * 8 / ALIGN(fmtinfo->bpp, 8);
+		fse->max_width = CAL_MAX_WIDTH_BYTES * 8 / ALIGN(fmtinfo->bpp, 8);
+		fse->min_height = CAL_MIN_HEIGHT_LINES;
+		fse->max_height = CAL_MAX_HEIGHT_LINES;
 	}
 
-	fmtinfo = cal_format_by_code(fse->code);
-	if (!fmtinfo)
-		return -EINVAL;
+out:
+	mutex_unlock(&phy->mutex);
 
-	fse->min_width = CAL_MIN_WIDTH_BYTES * 8 / ALIGN(fmtinfo->bpp, 8);
-	fse->max_width = CAL_MAX_WIDTH_BYTES * 8 / ALIGN(fmtinfo->bpp, 8);
-	fse->min_height = CAL_MIN_HEIGHT_LINES;
-	fse->max_height = CAL_MAX_HEIGHT_LINES;
-
-	return 0;
+	return ret;
 }
 
 static int cal_camerarx_sd_get_fmt(struct v4l2_subdev *sd,
@@ -685,10 +717,14 @@ static int cal_camerarx_sd_get_fmt(struct v4l2_subdev *sd,
 	struct cal_camerarx *phy = to_cal_camerarx(sd);
 	struct v4l2_mbus_framefmt *fmt;
 
+	mutex_lock(&phy->mutex);
+
 	fmt = cal_camerarx_get_pad_format(phy, sd_state, format->pad,
 					  format->which);
 	format->format = *fmt;
 
+	mutex_unlock(&phy->mutex);
+
 	return 0;
 }
 
@@ -702,21 +738,18 @@ static int cal_camerarx_sd_set_fmt(struct v4l2_subdev *sd,
 	unsigned int bpp;
 
 	/* No transcoding, source and sink formats must match. */
-	if (format->pad == CAL_CAMERARX_PAD_SOURCE)
+	if (cal_rx_pad_is_source(format->pad))
 		return cal_camerarx_sd_get_fmt(sd, sd_state, format);
 
 	/*
-	 * Default to the first format is the requested media bus code isn't
+	 * Default to the first format if the requested media bus code isn't
 	 * supported.
 	 */
 	fmtinfo = cal_format_by_code(format->format.code);
 	if (!fmtinfo)
 		fmtinfo = &cal_formats[0];
 
-	/*
-	 * Clamp the size, update the code. The field and colorspace are
-	 * accepted as-is.
-	 */
+	/* Clamp the size, update the code. The colorspace is accepted as-is. */
 	bpp = ALIGN(fmtinfo->bpp, 8);
 
 	format->format.width = clamp_t(unsigned int, format->format.width,
@@ -726,20 +759,23 @@ static int cal_camerarx_sd_set_fmt(struct v4l2_subdev *sd,
 					CAL_MIN_HEIGHT_LINES,
 					CAL_MAX_HEIGHT_LINES);
 	format->format.code = fmtinfo->code;
+	format->format.field = V4L2_FIELD_NONE;
 
 	/* Store the format and propagate it to the source pad. */
+
+	mutex_lock(&phy->mutex);
+
 	fmt = cal_camerarx_get_pad_format(phy, sd_state,
 					  CAL_CAMERARX_PAD_SINK,
 					  format->which);
 	*fmt = format->format;
 
 	fmt = cal_camerarx_get_pad_format(phy, sd_state,
-					  CAL_CAMERARX_PAD_SOURCE,
+					  CAL_CAMERARX_PAD_FIRST_SOURCE,
 					  format->which);
 	*fmt = format->format;
 
-	if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
-		phy->fmtinfo = fmtinfo;
+	mutex_unlock(&phy->mutex);
 
 	return 0;
 }
@@ -798,6 +834,7 @@ struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
 	struct platform_device *pdev = to_platform_device(cal->dev);
 	struct cal_camerarx *phy;
 	struct v4l2_subdev *sd;
+	unsigned int i;
 	int ret;
 
 	phy = kzalloc(sizeof(*phy), GFP_KERNEL);
@@ -807,6 +844,8 @@ struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
 	phy->cal = cal;
 	phy->instance = instance;
 
+	mutex_init(&phy->mutex);
+
 	phy->res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 						(instance == 0) ?
 						"cal_rx_core0" :
@@ -838,14 +877,17 @@ struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
 	sd->dev = cal->dev;
 
 	phy->pads[CAL_CAMERARX_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
-	phy->pads[CAL_CAMERARX_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
+	for (i = CAL_CAMERARX_PAD_FIRST_SOURCE; i < CAL_CAMERARX_NUM_PADS; ++i)
+		phy->pads[i].flags = MEDIA_PAD_FL_SOURCE;
 	sd->entity.ops = &cal_camerarx_media_ops;
 	ret = media_entity_pads_init(&sd->entity, ARRAY_SIZE(phy->pads),
 				     phy->pads);
 	if (ret)
 		goto error;
 
-	cal_camerarx_sd_init_cfg(sd, NULL);
+	ret = cal_camerarx_sd_init_cfg(sd, NULL);
+	if (ret)
+		goto error;
 
 	ret = v4l2_device_register_subdev(&cal->v4l2_dev, sd);
 	if (ret)
@@ -866,7 +908,8 @@ void cal_camerarx_destroy(struct cal_camerarx *phy)
 
 	v4l2_device_unregister_subdev(&phy->subdev);
 	media_entity_cleanup(&phy->subdev.entity);
-	of_node_put(phy->sensor_ep_node);
-	of_node_put(phy->sensor_node);
+	of_node_put(phy->source_ep_node);
+	of_node_put(phy->source_node);
+	mutex_destroy(&phy->mutex);
 	kfree(phy);
 }

drivers/media/platform/ti-vpe/cal-video.c

@@ -102,8 +102,8 @@ static const struct cal_format_info *find_format_by_code(struct cal_ctx *ctx,
 	return NULL;
 }
 
-static int cal_enum_fmt_vid_cap(struct file *file, void  *priv,
-				struct v4l2_fmtdesc *f)
+static int cal_legacy_enum_fmt_vid_cap(struct file *file, void *priv,
+				       struct v4l2_fmtdesc *f)
 {
 	struct cal_ctx *ctx = video_drvdata(file);
 	const struct cal_format_info *fmtinfo;
@@ -128,7 +128,7 @@ static int __subdev_get_format(struct cal_ctx *ctx,
 	sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 	sd_fmt.pad = 0;
 
-	ret = v4l2_subdev_call(ctx->phy->sensor, pad, get_fmt, NULL, &sd_fmt);
+	ret = v4l2_subdev_call(ctx->phy->source, pad, get_fmt, NULL, &sd_fmt);
 	if (ret)
 		return ret;
 
@@ -151,7 +151,7 @@ static int __subdev_set_format(struct cal_ctx *ctx,
 	sd_fmt.pad = 0;
 	*mbus_fmt = *fmt;
 
-	ret = v4l2_subdev_call(ctx->phy->sensor, pad, set_fmt, NULL, &sd_fmt);
+	ret = v4l2_subdev_call(ctx->phy->source, pad, set_fmt, NULL, &sd_fmt);
 	if (ret)
 		return ret;
 
@@ -189,8 +189,8 @@ static void cal_calc_format_size(struct cal_ctx *ctx,
 		f->fmt.pix.bytesperline, f->fmt.pix.sizeimage);
 }
 
-static int cal_try_fmt_vid_cap(struct file *file, void *priv,
-			       struct v4l2_format *f)
+static int cal_legacy_try_fmt_vid_cap(struct file *file, void *priv,
+				      struct v4l2_format *f)
 {
 	struct cal_ctx *ctx = video_drvdata(file);
 	const struct cal_format_info *fmtinfo;
@@ -216,7 +216,7 @@ static int cal_try_fmt_vid_cap(struct file *file, void *priv,
 	fse.code = fmtinfo->code;
 	fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 	for (fse.index = 0; ; fse.index++) {
-		ret = v4l2_subdev_call(ctx->phy->sensor, pad, enum_frame_size,
+		ret = v4l2_subdev_call(ctx->phy->source, pad, enum_frame_size,
 				       NULL, &fse);
 		if (ret)
 			break;
@@ -249,8 +249,8 @@ static int cal_try_fmt_vid_cap(struct file *file, void *priv,
 	return 0;
 }
 
-static int cal_s_fmt_vid_cap(struct file *file, void *priv,
-			     struct v4l2_format *f)
+static int cal_legacy_s_fmt_vid_cap(struct file *file, void *priv,
+				    struct v4l2_format *f)
 {
 	struct cal_ctx *ctx = video_drvdata(file);
 	struct vb2_queue *q = &ctx->vb_vidq;
@@ -266,7 +266,7 @@ static int cal_s_fmt_vid_cap(struct file *file, void *priv,
 		return -EBUSY;
 	}
 
-	ret = cal_try_fmt_vid_cap(file, priv, f);
+	ret = cal_legacy_try_fmt_vid_cap(file, priv, f);
 	if (ret < 0)
 		return ret;
 
@@ -300,8 +300,8 @@ static int cal_s_fmt_vid_cap(struct file *file, void *priv,
 	return 0;
 }
 
-static int cal_enum_framesizes(struct file *file, void *fh,
-			       struct v4l2_frmsizeenum *fsize)
+static int cal_legacy_enum_framesizes(struct file *file, void *fh,
+				      struct v4l2_frmsizeenum *fsize)
 {
 	struct cal_ctx *ctx = video_drvdata(file);
 	const struct cal_format_info *fmtinfo;
@@ -321,7 +321,7 @@ static int cal_enum_framesizes(struct file *file, void *fh,
 	fse.code = fmtinfo->code;
 	fse.which = V4L2_SUBDEV_FORMAT_ACTIVE;
 
-	ret = v4l2_subdev_call(ctx->phy->sensor, pad, enum_frame_size, NULL,
+	ret = v4l2_subdev_call(ctx->phy->source, pad, enum_frame_size, NULL,
 			       &fse);
 	if (ret)
 		return ret;
@@ -337,8 +337,8 @@ static int cal_enum_framesizes(struct file *file, void *fh,
 	return 0;
 }
 
-static int cal_enum_input(struct file *file, void *priv,
-			  struct v4l2_input *inp)
+static int cal_legacy_enum_input(struct file *file, void *priv,
+				 struct v4l2_input *inp)
 {
 	if (inp->index > 0)
 		return -EINVAL;
@@ -348,20 +348,20 @@ static int cal_enum_input(struct file *file, void *priv,
 	return 0;
 }
 
-static int cal_g_input(struct file *file, void *priv, unsigned int *i)
+static int cal_legacy_g_input(struct file *file, void *priv, unsigned int *i)
 {
 	*i = 0;
 	return 0;
 }
 
-static int cal_s_input(struct file *file, void *priv, unsigned int i)
+static int cal_legacy_s_input(struct file *file, void *priv, unsigned int i)
 {
 	return i > 0 ? -EINVAL : 0;
 }
 
 /* timeperframe is arbitrary and continuous */
-static int cal_enum_frameintervals(struct file *file, void *priv,
-				   struct v4l2_frmivalenum *fival)
+static int cal_legacy_enum_frameintervals(struct file *file, void *priv,
+					  struct v4l2_frmivalenum *fival)
 {
 	struct cal_ctx *ctx = video_drvdata(file);
 	const struct cal_format_info *fmtinfo;
@@ -378,7 +378,7 @@ static int cal_enum_frameintervals(struct file *file, void *priv,
 		return -EINVAL;
 
 	fie.code = fmtinfo->code;
-	ret = v4l2_subdev_call(ctx->phy->sensor, pad, enum_frame_interval,
+	ret = v4l2_subdev_call(ctx->phy->source, pad, enum_frame_interval,
 			       NULL, &fie);
 	if (ret)
 		return ret;
@@ -388,13 +388,27 @@ static int cal_enum_frameintervals(struct file *file, void *priv,
 	return 0;
 }
 
-static const struct v4l2_ioctl_ops cal_ioctl_video_ops = {
+static int cal_legacy_g_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
+{
+	struct cal_ctx *ctx = video_drvdata(file);
+
+	return v4l2_g_parm_cap(video_devdata(file), ctx->phy->source, a);
+}
+
+static int cal_legacy_s_parm(struct file *file, void *fh, struct v4l2_streamparm *a)
+{
+	struct cal_ctx *ctx = video_drvdata(file);
+
+	return v4l2_s_parm_cap(video_devdata(file), ctx->phy->source, a);
+}
+
+static const struct v4l2_ioctl_ops cal_ioctl_legacy_ops = {
 	.vidioc_querycap      = cal_querycap,
-	.vidioc_enum_fmt_vid_cap  = cal_enum_fmt_vid_cap,
+	.vidioc_enum_fmt_vid_cap  = cal_legacy_enum_fmt_vid_cap,
 	.vidioc_g_fmt_vid_cap     = cal_g_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap   = cal_try_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap     = cal_s_fmt_vid_cap,
-	.vidioc_enum_framesizes   = cal_enum_framesizes,
+	.vidioc_try_fmt_vid_cap   = cal_legacy_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap     = cal_legacy_s_fmt_vid_cap,
+	.vidioc_enum_framesizes   = cal_legacy_enum_framesizes,
 	.vidioc_reqbufs       = vb2_ioctl_reqbufs,
 	.vidioc_create_bufs   = vb2_ioctl_create_bufs,
 	.vidioc_prepare_buf   = vb2_ioctl_prepare_buf,
@@ -402,15 +416,17 @@ static const struct v4l2_ioctl_ops cal_ioctl_video_ops = {
 	.vidioc_qbuf          = vb2_ioctl_qbuf,
 	.vidioc_dqbuf         = vb2_ioctl_dqbuf,
 	.vidioc_expbuf        = vb2_ioctl_expbuf,
-	.vidioc_enum_input    = cal_enum_input,
-	.vidioc_g_input       = cal_g_input,
-	.vidioc_s_input       = cal_s_input,
-	.vidioc_enum_frameintervals = cal_enum_frameintervals,
+	.vidioc_enum_input    = cal_legacy_enum_input,
+	.vidioc_g_input       = cal_legacy_g_input,
+	.vidioc_s_input       = cal_legacy_s_input,
+	.vidioc_enum_frameintervals = cal_legacy_enum_frameintervals,
 	.vidioc_streamon      = vb2_ioctl_streamon,
 	.vidioc_streamoff     = vb2_ioctl_streamoff,
 	.vidioc_log_status    = v4l2_ctrl_log_status,
 	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
 	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+	.vidioc_g_parm		= cal_legacy_g_parm,
+	.vidioc_s_parm		= cal_legacy_s_parm,
 };
 
 /* ------------------------------------------------------------------
@@ -421,13 +437,28 @@ static const struct v4l2_ioctl_ops cal_ioctl_video_ops = {
 static int cal_mc_enum_fmt_vid_cap(struct file *file, void  *priv,
 				   struct v4l2_fmtdesc *f)
 {
+	unsigned int i;
+	unsigned int idx;
+
 	if (f->index >= cal_num_formats)
 		return -EINVAL;
 
-	f->pixelformat = cal_formats[f->index].fourcc;
-	f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	idx = 0;
 
-	return 0;
+	for (i = 0; i < cal_num_formats; ++i) {
+		if (f->mbus_code && cal_formats[i].code != f->mbus_code)
+			continue;
+
+		if (idx == f->index) {
+			f->pixelformat = cal_formats[i].fourcc;
+			f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+			return 0;
+		}
+
+		idx++;
+	}
+
+	return -EINVAL;
 }
 
 static void cal_mc_try_fmt(struct cal_ctx *ctx, struct v4l2_format *f,
@@ -656,8 +687,13 @@ static void cal_release_buffers(struct cal_ctx *ctx,
 static int cal_video_check_format(struct cal_ctx *ctx)
 {
 	const struct v4l2_mbus_framefmt *format;
+	struct media_pad *remote_pad;
 
-	format = &ctx->phy->formats[CAL_CAMERARX_PAD_SOURCE];
+	remote_pad = media_entity_remote_pad(&ctx->pad);
+	if (!remote_pad)
+		return -ENODEV;
+
+	format = &ctx->phy->formats[remote_pad->index];
 
 	if (ctx->fmtinfo->code != format->code ||
 	    ctx->v_fmt.fmt.pix.height != format->height ||
@@ -692,9 +728,15 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
 		goto error_pipeline;
 	}
 
+	ret = cal_ctx_prepare(ctx);
+	if (ret) {
+		ctx_err(ctx, "Failed to prepare context: %d\n", ret);
+		goto error_pipeline;
+	}
+
 	spin_lock_irq(&ctx->dma.lock);
 	buf = list_first_entry(&ctx->dma.queue, struct cal_buffer, list);
-	ctx->dma.pending = buf;
+	ctx->dma.active = buf;
 	list_del(&buf->list);
 	spin_unlock_irq(&ctx->dma.lock);
 
@@ -719,6 +761,7 @@ static int cal_start_streaming(struct vb2_queue *vq, unsigned int count)
 error_stop:
 	cal_ctx_stop(ctx);
 	pm_runtime_put_sync(ctx->cal->dev);
+	cal_ctx_unprepare(ctx);
 
 error_pipeline:
 	media_pipeline_stop(&ctx->vdev.entity);
@@ -738,6 +781,8 @@ static void cal_stop_streaming(struct vb2_queue *vq)
 
 	pm_runtime_put_sync(ctx->cal->dev);
 
+	cal_ctx_unprepare(ctx);
+
 	cal_release_buffers(ctx, VB2_BUF_STATE_ERROR);
 
 	media_pipeline_stop(&ctx->vdev.entity);
@@ -785,20 +830,20 @@ static int cal_ctx_v4l2_init_formats(struct cal_ctx *ctx)
 		memset(&mbus_code, 0, sizeof(mbus_code));
 		mbus_code.index = j;
 		mbus_code.which = V4L2_SUBDEV_FORMAT_ACTIVE;
-		ret = v4l2_subdev_call(ctx->phy->sensor, pad, enum_mbus_code,
+		ret = v4l2_subdev_call(ctx->phy->source, pad, enum_mbus_code,
 				       NULL, &mbus_code);
 		if (ret == -EINVAL)
 			break;
 
 		if (ret) {
 			ctx_err(ctx, "Error enumerating mbus codes in subdev %s: %d\n",
-				ctx->phy->sensor->name, ret);
+				ctx->phy->source->name, ret);
 			return ret;
 		}
 
 		ctx_dbg(2, ctx,
 			"subdev %s: code: %04x idx: %u\n",
-			ctx->phy->sensor->name, mbus_code.code, j);
+			ctx->phy->source->name, mbus_code.code, j);
 
 		for (k = 0; k < cal_num_formats; k++) {
 			fmtinfo = &cal_formats[k];
@@ -816,7 +861,7 @@ static int cal_ctx_v4l2_init_formats(struct cal_ctx *ctx)
 
 	if (i == 0) {
 		ctx_err(ctx, "No suitable format reported by subdev %s\n",
-			ctx->phy->sensor->name);
+			ctx->phy->source->name);
 		return -EINVAL;
 	}
 
@@ -841,22 +886,57 @@ static int cal_ctx_v4l2_init_formats(struct cal_ctx *ctx)
 	return 0;
 }
 
+static int cal_ctx_v4l2_init_mc_format(struct cal_ctx *ctx)
+{
+	const struct cal_format_info *fmtinfo;
+	struct v4l2_pix_format *pix_fmt = &ctx->v_fmt.fmt.pix;
+
+	fmtinfo = cal_format_by_code(MEDIA_BUS_FMT_UYVY8_2X8);
+	if (!fmtinfo)
+		return -EINVAL;
+
+	pix_fmt->width = 640;
+	pix_fmt->height = 480;
+	pix_fmt->field = V4L2_FIELD_NONE;
+	pix_fmt->colorspace = V4L2_COLORSPACE_SRGB;
+	pix_fmt->ycbcr_enc = V4L2_YCBCR_ENC_601;
+	pix_fmt->quantization = V4L2_QUANTIZATION_LIM_RANGE;
+	pix_fmt->xfer_func = V4L2_XFER_FUNC_SRGB;
+	pix_fmt->pixelformat = fmtinfo->fourcc;
+
+	ctx->v_fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	/* Save current format */
+	cal_calc_format_size(ctx, fmtinfo, &ctx->v_fmt);
+	ctx->fmtinfo = fmtinfo;
+
+	return 0;
+}
+
 int cal_ctx_v4l2_register(struct cal_ctx *ctx)
 {
 	struct video_device *vfd = &ctx->vdev;
 	int ret;
 
-	ret = cal_ctx_v4l2_init_formats(ctx);
-	if (ret)
-		return ret;
-
 	if (!cal_mc_api) {
 		struct v4l2_ctrl_handler *hdl = &ctx->ctrl_handler;
 
-		ret = v4l2_ctrl_add_handler(hdl, ctx->phy->sensor->ctrl_handler,
+		ret = cal_ctx_v4l2_init_formats(ctx);
+		if (ret) {
+			ctx_err(ctx, "Failed to init formats: %d\n", ret);
+			return ret;
+		}
+
+		ret = v4l2_ctrl_add_handler(hdl, ctx->phy->source->ctrl_handler,
 					    NULL, true);
 		if (ret < 0) {
-			ctx_err(ctx, "Failed to add sensor ctrl handler\n");
+			ctx_err(ctx, "Failed to add source ctrl handler\n");
+			return ret;
+		}
+	} else {
+		ret = cal_ctx_v4l2_init_mc_format(ctx);
+		if (ret) {
+			ctx_err(ctx, "Failed to init format: %d\n", ret);
 			return ret;
 		}
 	}
@@ -868,13 +948,13 @@ int cal_ctx_v4l2_register(struct cal_ctx *ctx)
 	}
 
 	ret = media_create_pad_link(&ctx->phy->subdev.entity,
-				    CAL_CAMERARX_PAD_SOURCE,
+				    CAL_CAMERARX_PAD_FIRST_SOURCE,
 				    &vfd->entity, 0,
 				    MEDIA_LNK_FL_IMMUTABLE |
 				    MEDIA_LNK_FL_ENABLED);
 	if (ret) {
 		ctx_err(ctx, "Failed to create media link for context %u\n",
-			ctx->index);
+			ctx->dma_ctx);
 		video_unregister_device(vfd);
 		return ret;
 	}
@@ -926,9 +1006,9 @@ int cal_ctx_v4l2_init(struct cal_ctx *ctx)
 			 | (cal_mc_api ? V4L2_CAP_IO_MC : 0);
 	vfd->v4l2_dev = &ctx->cal->v4l2_dev;
 	vfd->queue = q;
-	snprintf(vfd->name, sizeof(vfd->name), "CAL output %u", ctx->index);
+	snprintf(vfd->name, sizeof(vfd->name), "CAL output %u", ctx->dma_ctx);
 	vfd->release = video_device_release_empty;
-	vfd->ioctl_ops = cal_mc_api ? &cal_ioctl_mc_ops : &cal_ioctl_video_ops;
+	vfd->ioctl_ops = cal_mc_api ? &cal_ioctl_mc_ops : &cal_ioctl_legacy_ops;
 	vfd->lock = &ctx->mutex;
 	video_set_drvdata(vfd, ctx);
 

drivers/media/platform/ti-vpe/cal.c

@@ -290,11 +290,42 @@ void cal_quickdump_regs(struct cal_dev *cal)
  * ------------------------------------------------------------------
  */
 
+#define CAL_MAX_PIX_PROC 4
+
+static int cal_reserve_pix_proc(struct cal_dev *cal)
+{
+	unsigned long ret;
+
+	spin_lock(&cal->v4l2_dev.lock);
+
+	ret = find_first_zero_bit(&cal->reserved_pix_proc_mask, CAL_MAX_PIX_PROC);
+
+	if (ret == CAL_MAX_PIX_PROC) {
+		spin_unlock(&cal->v4l2_dev.lock);
+		return -ENOSPC;
+	}
+
+	cal->reserved_pix_proc_mask |= BIT(ret);
+
+	spin_unlock(&cal->v4l2_dev.lock);
+
+	return ret;
+}
+
+static void cal_release_pix_proc(struct cal_dev *cal, unsigned int pix_proc_num)
+{
+	spin_lock(&cal->v4l2_dev.lock);
+
+	cal->reserved_pix_proc_mask &= ~BIT(pix_proc_num);
+
+	spin_unlock(&cal->v4l2_dev.lock);
+}
+
 static void cal_ctx_csi2_config(struct cal_ctx *ctx)
 {
 	u32 val;
 
-	val = cal_read(ctx->cal, CAL_CSI2_CTX0(ctx->index));
+	val = cal_read(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx));
 	cal_set_field(&val, ctx->cport, CAL_CSI2_CTX_CPORT_MASK);
 	/*
 	 * DT type: MIPI CSI-2 Specs
@@ -304,15 +335,16 @@ static void cal_ctx_csi2_config(struct cal_ctx *ctx)
 	 *  0x2A: RAW8   1 pixel  = 1 byte
 	 *  0x1E: YUV422 2 pixels = 4 bytes
 	 */
-	cal_set_field(&val, 0x1, CAL_CSI2_CTX_DT_MASK);
-	cal_set_field(&val, 0, CAL_CSI2_CTX_VC_MASK);
+	cal_set_field(&val, ctx->datatype, CAL_CSI2_CTX_DT_MASK);
+	cal_set_field(&val, ctx->vc, CAL_CSI2_CTX_VC_MASK);
 	cal_set_field(&val, ctx->v_fmt.fmt.pix.height, CAL_CSI2_CTX_LINES_MASK);
 	cal_set_field(&val, CAL_CSI2_CTX_ATT_PIX, CAL_CSI2_CTX_ATT_MASK);
 	cal_set_field(&val, CAL_CSI2_CTX_PACK_MODE_LINE,
 		      CAL_CSI2_CTX_PACK_MODE_MASK);
-	cal_write(ctx->cal, CAL_CSI2_CTX0(ctx->index), val);
-	ctx_dbg(3, ctx, "CAL_CSI2_CTX0(%d) = 0x%08x\n", ctx->index,
-		cal_read(ctx->cal, CAL_CSI2_CTX0(ctx->index)));
+	cal_write(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx), val);
+	ctx_dbg(3, ctx, "CAL_CSI2_CTX(%u, %u) = 0x%08x\n",
+		ctx->phy->instance, ctx->csi2_ctx,
+		cal_read(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx)));
 }
 
 static void cal_ctx_pix_proc_config(struct cal_ctx *ctx)
@@ -354,16 +386,16 @@ static void cal_ctx_pix_proc_config(struct cal_ctx *ctx)
 		break;
 	}
 
-	val = cal_read(ctx->cal, CAL_PIX_PROC(ctx->index));
+	val = cal_read(ctx->cal, CAL_PIX_PROC(ctx->pix_proc));
 	cal_set_field(&val, extract, CAL_PIX_PROC_EXTRACT_MASK);
 	cal_set_field(&val, CAL_PIX_PROC_DPCMD_BYPASS, CAL_PIX_PROC_DPCMD_MASK);
 	cal_set_field(&val, CAL_PIX_PROC_DPCME_BYPASS, CAL_PIX_PROC_DPCME_MASK);
 	cal_set_field(&val, pack, CAL_PIX_PROC_PACK_MASK);
 	cal_set_field(&val, ctx->cport, CAL_PIX_PROC_CPORT_MASK);
 	cal_set_field(&val, 1, CAL_PIX_PROC_EN_MASK);
-	cal_write(ctx->cal, CAL_PIX_PROC(ctx->index), val);
-	ctx_dbg(3, ctx, "CAL_PIX_PROC(%d) = 0x%08x\n", ctx->index,
-		cal_read(ctx->cal, CAL_PIX_PROC(ctx->index)));
+	cal_write(ctx->cal, CAL_PIX_PROC(ctx->pix_proc), val);
+	ctx_dbg(3, ctx, "CAL_PIX_PROC(%u) = 0x%08x\n", ctx->pix_proc,
+		cal_read(ctx->cal, CAL_PIX_PROC(ctx->pix_proc)));
 }
 
 static void cal_ctx_wr_dma_config(struct cal_ctx *ctx)
@@ -371,27 +403,25 @@ static void cal_ctx_wr_dma_config(struct cal_ctx *ctx)
 	unsigned int stride = ctx->v_fmt.fmt.pix.bytesperline;
 	u32 val;
 
-	val = cal_read(ctx->cal, CAL_WR_DMA_CTRL(ctx->index));
+	val = cal_read(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx));
 	cal_set_field(&val, ctx->cport, CAL_WR_DMA_CTRL_CPORT_MASK);
 	cal_set_field(&val, ctx->v_fmt.fmt.pix.height,
 		      CAL_WR_DMA_CTRL_YSIZE_MASK);
 	cal_set_field(&val, CAL_WR_DMA_CTRL_DTAG_PIX_DAT,
 		      CAL_WR_DMA_CTRL_DTAG_MASK);
-	cal_set_field(&val, CAL_WR_DMA_CTRL_MODE_CONST,
-		      CAL_WR_DMA_CTRL_MODE_MASK);
 	cal_set_field(&val, CAL_WR_DMA_CTRL_PATTERN_LINEAR,
 		      CAL_WR_DMA_CTRL_PATTERN_MASK);
 	cal_set_field(&val, 1, CAL_WR_DMA_CTRL_STALL_RD_MASK);
-	cal_write(ctx->cal, CAL_WR_DMA_CTRL(ctx->index), val);
-	ctx_dbg(3, ctx, "CAL_WR_DMA_CTRL(%d) = 0x%08x\n", ctx->index,
-		cal_read(ctx->cal, CAL_WR_DMA_CTRL(ctx->index)));
+	cal_write(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx), val);
+	ctx_dbg(3, ctx, "CAL_WR_DMA_CTRL(%d) = 0x%08x\n", ctx->dma_ctx,
+		cal_read(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx)));
 
-	cal_write_field(ctx->cal, CAL_WR_DMA_OFST(ctx->index),
+	cal_write_field(ctx->cal, CAL_WR_DMA_OFST(ctx->dma_ctx),
 			stride / 16, CAL_WR_DMA_OFST_MASK);
-	ctx_dbg(3, ctx, "CAL_WR_DMA_OFST(%d) = 0x%08x\n", ctx->index,
-		cal_read(ctx->cal, CAL_WR_DMA_OFST(ctx->index)));
+	ctx_dbg(3, ctx, "CAL_WR_DMA_OFST(%d) = 0x%08x\n", ctx->dma_ctx,
+		cal_read(ctx->cal, CAL_WR_DMA_OFST(ctx->dma_ctx)));
 
-	val = cal_read(ctx->cal, CAL_WR_DMA_XSIZE(ctx->index));
+	val = cal_read(ctx->cal, CAL_WR_DMA_XSIZE(ctx->dma_ctx));
 	/* 64 bit word means no skipping */
 	cal_set_field(&val, 0, CAL_WR_DMA_XSIZE_XSKIP_MASK);
 	/*
@@ -400,34 +430,32 @@ static void cal_ctx_wr_dma_config(struct cal_ctx *ctx)
 	 * written per line.
 	 */
 	cal_set_field(&val, stride / 8, CAL_WR_DMA_XSIZE_MASK);
-	cal_write(ctx->cal, CAL_WR_DMA_XSIZE(ctx->index), val);
-	ctx_dbg(3, ctx, "CAL_WR_DMA_XSIZE(%d) = 0x%08x\n", ctx->index,
-		cal_read(ctx->cal, CAL_WR_DMA_XSIZE(ctx->index)));
-
-	val = cal_read(ctx->cal, CAL_CTRL);
-	cal_set_field(&val, CAL_CTRL_BURSTSIZE_BURST128,
-		      CAL_CTRL_BURSTSIZE_MASK);
-	cal_set_field(&val, 0xF, CAL_CTRL_TAGCNT_MASK);
-	cal_set_field(&val, CAL_CTRL_POSTED_WRITES_NONPOSTED,
-		      CAL_CTRL_POSTED_WRITES_MASK);
-	cal_set_field(&val, 0xFF, CAL_CTRL_MFLAGL_MASK);
-	cal_set_field(&val, 0xFF, CAL_CTRL_MFLAGH_MASK);
-	cal_write(ctx->cal, CAL_CTRL, val);
-	ctx_dbg(3, ctx, "CAL_CTRL = 0x%08x\n", cal_read(ctx->cal, CAL_CTRL));
+	cal_write(ctx->cal, CAL_WR_DMA_XSIZE(ctx->dma_ctx), val);
+	ctx_dbg(3, ctx, "CAL_WR_DMA_XSIZE(%d) = 0x%08x\n", ctx->dma_ctx,
+		cal_read(ctx->cal, CAL_WR_DMA_XSIZE(ctx->dma_ctx)));
 }
 
 void cal_ctx_set_dma_addr(struct cal_ctx *ctx, dma_addr_t addr)
 {
-	cal_write(ctx->cal, CAL_WR_DMA_ADDR(ctx->index), addr);
+	cal_write(ctx->cal, CAL_WR_DMA_ADDR(ctx->dma_ctx), addr);
+}
+
+static void cal_ctx_wr_dma_enable(struct cal_ctx *ctx)
+{
+	u32 val = cal_read(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx));
+
+	cal_set_field(&val, CAL_WR_DMA_CTRL_MODE_CONST,
+		      CAL_WR_DMA_CTRL_MODE_MASK);
+	cal_write(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx), val);
 }
 
 static void cal_ctx_wr_dma_disable(struct cal_ctx *ctx)
 {
-	u32 val = cal_read(ctx->cal, CAL_WR_DMA_CTRL(ctx->index));
+	u32 val = cal_read(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx));
 
 	cal_set_field(&val, CAL_WR_DMA_CTRL_MODE_DIS,
 		      CAL_WR_DMA_CTRL_MODE_MASK);
-	cal_write(ctx->cal, CAL_WR_DMA_CTRL(ctx->index), val);
+	cal_write(ctx->cal, CAL_WR_DMA_CTRL(ctx->dma_ctx), val);
 }
 
 static bool cal_ctx_wr_dma_stopped(struct cal_ctx *ctx)
@@ -441,6 +469,31 @@ static bool cal_ctx_wr_dma_stopped(struct cal_ctx *ctx)
 	return stopped;
 }
 
+int cal_ctx_prepare(struct cal_ctx *ctx)
+{
+	int ret;
+
+	ctx->use_pix_proc = !ctx->fmtinfo->meta;
+
+	if (ctx->use_pix_proc) {
+		ret = cal_reserve_pix_proc(ctx->cal);
+		if (ret < 0) {
+			ctx_err(ctx, "Failed to reserve pix proc: %d\n", ret);
+			return ret;
+		}
+
+		ctx->pix_proc = ret;
+	}
+
+	return 0;
+}
+
+void cal_ctx_unprepare(struct cal_ctx *ctx)
+{
+	if (ctx->use_pix_proc)
+		cal_release_pix_proc(ctx->cal, ctx->pix_proc);
+}
+
 void cal_ctx_start(struct cal_ctx *ctx)
 {
 	ctx->sequence = 0;
@@ -448,14 +501,17 @@ void cal_ctx_start(struct cal_ctx *ctx)
 
 	/* Configure the CSI-2, pixel processing and write DMA contexts. */
 	cal_ctx_csi2_config(ctx);
-	cal_ctx_pix_proc_config(ctx);
+	if (ctx->use_pix_proc)
+		cal_ctx_pix_proc_config(ctx);
 	cal_ctx_wr_dma_config(ctx);
 
 	/* Enable IRQ_WDMA_END and IRQ_WDMA_START. */
 	cal_write(ctx->cal, CAL_HL_IRQENABLE_SET(1),
-		  CAL_HL_IRQ_MASK(ctx->index));
+		  CAL_HL_IRQ_WDMA_END_MASK(ctx->dma_ctx));
 	cal_write(ctx->cal, CAL_HL_IRQENABLE_SET(2),
-		  CAL_HL_IRQ_MASK(ctx->index));
+		  CAL_HL_IRQ_WDMA_START_MASK(ctx->dma_ctx));
+
+	cal_ctx_wr_dma_enable(ctx);
 }
 
 void cal_ctx_stop(struct cal_ctx *ctx)
@@ -479,11 +535,18 @@ void cal_ctx_stop(struct cal_ctx *ctx)
 
 	/* Disable IRQ_WDMA_END and IRQ_WDMA_START. */
 	cal_write(ctx->cal, CAL_HL_IRQENABLE_CLR(1),
-		  CAL_HL_IRQ_MASK(ctx->index));
+		  CAL_HL_IRQ_WDMA_END_MASK(ctx->dma_ctx));
 	cal_write(ctx->cal, CAL_HL_IRQENABLE_CLR(2),
-		  CAL_HL_IRQ_MASK(ctx->index));
+		  CAL_HL_IRQ_WDMA_START_MASK(ctx->dma_ctx));
 
 	ctx->dma.state = CAL_DMA_STOPPED;
+
+	/* Disable CSI2 context */
+	cal_write(ctx->cal, CAL_CSI2_CTX(ctx->phy->instance, ctx->csi2_ctx), 0);
+
+	/* Disable pix proc */
+	if (ctx->use_pix_proc)
+		cal_write(ctx->cal, CAL_PIX_PROC(ctx->pix_proc), 0);
 }
 
 /* ------------------------------------------------------------------
@@ -577,6 +640,16 @@ static irqreturn_t cal_irq(int irq_cal, void *data)
 				cal_write(cal, CAL_CSI2_COMPLEXIO_IRQSTATUS(i),
 					  cio_stat);
 			}
+
+			if (status & CAL_HL_IRQ_VC_MASK(i)) {
+				u32 vc_stat = cal_read(cal, CAL_CSI2_VC_IRQSTATUS(i));
+
+				dev_err_ratelimited(cal->dev,
+						    "CIO%u VC error: %#08x\n",
+						    i, vc_stat);
+
+				cal_write(cal, CAL_CSI2_VC_IRQSTATUS(i), vc_stat);
+			}
 		}
 	}
 
@@ -588,8 +661,8 @@ static irqreturn_t cal_irq(int irq_cal, void *data)
 		/* Clear Interrupt status */
 		cal_write(cal, CAL_HL_IRQSTATUS(1), status);
 
-		for (i = 0; i < ARRAY_SIZE(cal->ctx); ++i) {
-			if (status & CAL_HL_IRQ_MASK(i))
+		for (i = 0; i < cal->num_contexts; ++i) {
+			if (status & CAL_HL_IRQ_WDMA_END_MASK(i))
 				cal_irq_wdma_end(cal->ctx[i]);
 		}
 	}
@@ -602,8 +675,8 @@ static irqreturn_t cal_irq(int irq_cal, void *data)
 		/* Clear Interrupt status */
 		cal_write(cal, CAL_HL_IRQSTATUS(2), status);
 
-		for (i = 0; i < ARRAY_SIZE(cal->ctx); ++i) {
-			if (status & CAL_HL_IRQ_MASK(i))
+		for (i = 0; i < cal->num_contexts; ++i) {
+			if (status & CAL_HL_IRQ_WDMA_START_MASK(i))
 				cal_irq_wdma_start(cal->ctx[i]);
 		}
 	}
@@ -635,20 +708,20 @@ static int cal_async_notifier_bound(struct v4l2_async_notifier *notifier,
 	int pad;
 	int ret;
 
-	if (phy->sensor) {
+	if (phy->source) {
 		phy_info(phy, "Rejecting subdev %s (Already set!!)",
 			 subdev->name);
 		return 0;
 	}
 
-	phy->sensor = subdev;
-	phy_dbg(1, phy, "Using sensor %s for capture\n", subdev->name);
+	phy->source = subdev;
+	phy_dbg(1, phy, "Using source %s for capture\n", subdev->name);
 
 	pad = media_entity_get_fwnode_pad(&subdev->entity,
-					  of_fwnode_handle(phy->sensor_ep_node),
+					  of_fwnode_handle(phy->source_ep_node),
 					  MEDIA_PAD_FL_SOURCE);
 	if (pad < 0) {
-		phy_err(phy, "Sensor %s has no connected source pad\n",
+		phy_err(phy, "Source %s has no connected source pad\n",
 			subdev->name);
 		return pad;
 	}
@@ -658,7 +731,7 @@ static int cal_async_notifier_bound(struct v4l2_async_notifier *notifier,
 				    MEDIA_LNK_FL_IMMUTABLE |
 				    MEDIA_LNK_FL_ENABLED);
 	if (ret) {
-		phy_err(phy, "Failed to create media link for sensor %s\n",
+		phy_err(phy, "Failed to create media link for source %s\n",
 			subdev->name);
 		return ret;
 	}
@@ -670,15 +743,30 @@ static int cal_async_notifier_complete(struct v4l2_async_notifier *notifier)
 {
 	struct cal_dev *cal = container_of(notifier, struct cal_dev, notifier);
 	unsigned int i;
-	int ret = 0;
+	int ret;
 
-	for (i = 0; i < ARRAY_SIZE(cal->ctx); ++i) {
-		if (cal->ctx[i])
-			cal_ctx_v4l2_register(cal->ctx[i]);
+	for (i = 0; i < cal->num_contexts; ++i) {
+		ret = cal_ctx_v4l2_register(cal->ctx[i]);
+		if (ret)
+			goto err_ctx_unreg;
 	}
 
-	if (cal_mc_api)
-		ret = v4l2_device_register_subdev_nodes(&cal->v4l2_dev);
+	if (!cal_mc_api)
+		return 0;
+
+	ret = v4l2_device_register_subdev_nodes(&cal->v4l2_dev);
+	if (ret)
+		goto err_ctx_unreg;
+
+	return 0;
+
+err_ctx_unreg:
+	for (; i > 0; --i) {
+		if (!cal->ctx[i - 1])
+			continue;
+
+		cal_ctx_v4l2_unregister(cal->ctx[i - 1]);
+	}
 
 	return ret;
 }
@@ -701,10 +789,10 @@ static int cal_async_notifier_register(struct cal_dev *cal)
 		struct cal_v4l2_async_subdev *casd;
 		struct fwnode_handle *fwnode;
 
-		if (!phy->sensor_node)
+		if (!phy->source_node)
 			continue;
 
-		fwnode = of_fwnode_handle(phy->sensor_node);
+		fwnode = of_fwnode_handle(phy->source_node);
 		casd = v4l2_async_notifier_add_fwnode_subdev(&cal->notifier,
 							     fwnode,
 							     struct cal_v4l2_async_subdev);
@@ -777,10 +865,8 @@ static void cal_media_unregister(struct cal_dev *cal)
 	unsigned int i;
 
 	/* Unregister all the V4L2 video devices. */
-	for (i = 0; i < ARRAY_SIZE(cal->ctx); i++) {
-		if (cal->ctx[i])
-			cal_ctx_v4l2_unregister(cal->ctx[i]);
-	}
+	for (i = 0; i < cal->num_contexts; i++)
+		cal_ctx_v4l2_unregister(cal->ctx[i]);
 
 	cal_async_notifier_unregister(cal);
 	media_device_unregister(&cal->mdev);
@@ -825,13 +911,6 @@ static int cal_media_init(struct cal_dev *cal)
  */
 static void cal_media_cleanup(struct cal_dev *cal)
 {
-	unsigned int i;
-
-	for (i = 0; i < ARRAY_SIZE(cal->ctx); i++) {
-		if (cal->ctx[i])
-			cal_ctx_v4l2_cleanup(cal->ctx[i]);
-	}
-
 	v4l2_device_unregister(&cal->v4l2_dev);
 	media_device_cleanup(&cal->mdev);
 
@@ -848,14 +927,17 @@ static struct cal_ctx *cal_ctx_create(struct cal_dev *cal, int inst)
 	struct cal_ctx *ctx;
 	int ret;
 
-	ctx = devm_kzalloc(cal->dev, sizeof(*ctx), GFP_KERNEL);
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
 	if (!ctx)
 		return NULL;
 
 	ctx->cal = cal;
 	ctx->phy = cal->phy[inst];
-	ctx->index = inst;
+	ctx->dma_ctx = inst;
+	ctx->csi2_ctx = inst;
 	ctx->cport = inst;
+	ctx->vc = 0;
+	ctx->datatype = CAL_CSI2_CTX_DT_ANY;
 
 	ret = cal_ctx_v4l2_init(ctx);
 	if (ret)
@@ -864,6 +946,13 @@ static struct cal_ctx *cal_ctx_create(struct cal_dev *cal, int inst)
 	return ctx;
 }
 
+static void cal_ctx_destroy(struct cal_ctx *ctx)
+{
+	cal_ctx_v4l2_cleanup(ctx);
+
+	kfree(ctx);
+}
+
 static const struct of_device_id cal_of_match[] = {
 	{
 		.compatible = "ti,dra72-cal",
@@ -976,7 +1065,6 @@ static int cal_init_camerarx_regmap(struct cal_dev *cal)
 static int cal_probe(struct platform_device *pdev)
 {
 	struct cal_dev *cal;
-	struct cal_ctx *ctx;
 	bool connected = false;
 	unsigned int i;
 	int ret;
@@ -1045,7 +1133,7 @@ static int cal_probe(struct platform_device *pdev)
 			goto error_camerarx;
 		}
 
-		if (cal->phy[i]->sensor_node)
+		if (cal->phy[i]->source_node)
 			connected = true;
 	}
 
@@ -1057,15 +1145,17 @@ static int cal_probe(struct platform_device *pdev)
 
 	/* Create contexts. */
 	for (i = 0; i < cal->data->num_csi2_phy; ++i) {
-		if (!cal->phy[i]->sensor_node)
+		if (!cal->phy[i]->source_node)
 			continue;
 
-		cal->ctx[i] = cal_ctx_create(cal, i);
-		if (!cal->ctx[i]) {
-			cal_err(cal, "Failed to create context %u\n", i);
+		cal->ctx[cal->num_contexts] = cal_ctx_create(cal, i);
+		if (!cal->ctx[cal->num_contexts]) {
+			cal_err(cal, "Failed to create context %u\n", cal->num_contexts);
 			ret = -ENODEV;
 			goto error_context;
 		}
+
+		cal->num_contexts++;
 	}
 
 	/* Register the media device. */
@@ -1076,11 +1166,8 @@ static int cal_probe(struct platform_device *pdev)
 	return 0;
 
 error_context:
-	for (i = 0; i < ARRAY_SIZE(cal->ctx); i++) {
-		ctx = cal->ctx[i];
-		if (ctx)
-			cal_ctx_v4l2_cleanup(ctx);
-	}
+	for (i = 0; i < cal->num_contexts; i++)
+		cal_ctx_destroy(cal->ctx[i]);
 
 error_camerarx:
 	for (i = 0; i < cal->data->num_csi2_phy; i++)
@@ -1106,16 +1193,17 @@ static int cal_remove(struct platform_device *pdev)
 
 	cal_media_unregister(cal);
 
-	for (i = 0; i < ARRAY_SIZE(cal->phy); i++) {
-		if (cal->phy[i])
-			cal_camerarx_disable(cal->phy[i]);
-	}
+	for (i = 0; i < cal->data->num_csi2_phy; i++)
+		cal_camerarx_disable(cal->phy[i]);
 
-	cal_media_cleanup(cal);
+	for (i = 0; i < cal->num_contexts; i++)
+		cal_ctx_destroy(cal->ctx[i]);
 
 	for (i = 0; i < cal->data->num_csi2_phy; i++)
 		cal_camerarx_destroy(cal->phy[i]);
 
+	cal_media_cleanup(cal);
+
 	if (ret >= 0)
 		pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
@@ -1127,6 +1215,7 @@ static int cal_runtime_resume(struct device *dev)
 {
 	struct cal_dev *cal = dev_get_drvdata(dev);
 	unsigned int i;
+	u32 val;
 
 	if (cal->data->flags & DRA72_CAL_PRE_ES2_LDO_DISABLE) {
 		/*
@@ -1143,6 +1232,17 @@ static int cal_runtime_resume(struct device *dev)
 	 */
 	cal_write(cal, CAL_HL_IRQENABLE_SET(0), CAL_HL_IRQ_OCPO_ERR_MASK);
 
+	val = cal_read(cal, CAL_CTRL);
+	cal_set_field(&val, CAL_CTRL_BURSTSIZE_BURST128,
+		      CAL_CTRL_BURSTSIZE_MASK);
+	cal_set_field(&val, 0xf, CAL_CTRL_TAGCNT_MASK);
+	cal_set_field(&val, CAL_CTRL_POSTED_WRITES_NONPOSTED,
+		      CAL_CTRL_POSTED_WRITES_MASK);
+	cal_set_field(&val, 0xff, CAL_CTRL_MFLAGL_MASK);
+	cal_set_field(&val, 0xff, CAL_CTRL_MFLAGH_MASK);
+	cal_write(cal, CAL_CTRL, val);
+	cal_dbg(3, cal, "CAL_CTRL = 0x%08x\n", cal_read(cal, CAL_CTRL));
+
 	return 0;
 }
 

drivers/media/platform/ti-vpe/cal.h

@@ -29,7 +29,7 @@
 #include <media/videobuf2-v4l2.h>
 
 #define CAL_MODULE_NAME			"cal"
-#define CAL_NUM_CONTEXT			2
+#define CAL_MAX_NUM_CONTEXT		8
 #define CAL_NUM_CSI2_PORTS		2
 
 /*
@@ -44,7 +44,22 @@
 #define CAL_MAX_HEIGHT_LINES		16383
 
 #define CAL_CAMERARX_PAD_SINK		0
-#define CAL_CAMERARX_PAD_SOURCE		1
+#define CAL_CAMERARX_PAD_FIRST_SOURCE	1
+#define CAL_CAMERARX_NUM_SOURCE_PADS	1
+#define CAL_CAMERARX_NUM_PADS		(1 + CAL_CAMERARX_NUM_SOURCE_PADS)
+
+static inline bool cal_rx_pad_is_sink(u32 pad)
+{
+	/* Camera RX has 1 sink pad, and N source pads */
+	return pad == 0;
+}
+
+static inline bool cal_rx_pad_is_source(u32 pad)
+{
+	/* Camera RX has 1 sink pad, and N source pads */
+	return pad >= CAL_CAMERARX_PAD_FIRST_SOURCE &&
+	       pad <= CAL_CAMERARX_NUM_SOURCE_PADS;
+}
 
 struct device;
 struct device_node;
@@ -73,6 +88,7 @@ struct cal_format_info {
 	u32	code;
 	/* Bits per pixel */
 	u8	bpp;
+	bool	meta;
 };
 
 /* buffer for one video frame */
@@ -149,22 +165,29 @@ struct cal_data {
 struct cal_camerarx {
 	void __iomem		*base;
 	struct resource		*res;
-	struct device		*dev;
 	struct regmap_field	*fields[F_MAX_FIELDS];
 
 	struct cal_dev		*cal;
 	unsigned int		instance;
 
 	struct v4l2_fwnode_endpoint	endpoint;
-	struct device_node	*sensor_ep_node;
-	struct device_node	*sensor_node;
-	struct v4l2_subdev	*sensor;
+	struct device_node	*source_ep_node;
+	struct device_node	*source_node;
+	struct v4l2_subdev	*source;
 	struct media_pipeline	pipe;
 
 	struct v4l2_subdev	subdev;
-	struct media_pad	pads[2];
-	struct v4l2_mbus_framefmt	formats[2];
-	const struct cal_format_info	*fmtinfo;
+	struct media_pad	pads[CAL_CAMERARX_NUM_PADS];
+	struct v4l2_mbus_framefmt	formats[CAL_CAMERARX_NUM_PADS];
+
+	/*
+	 * Lock for camerarx ops. Protects:
+	 * - formats
+	 * - enable_count
+	 */
+	struct mutex		mutex;
+
+	unsigned int		enable_count;
 };
 
 struct cal_dev {
@@ -184,11 +207,14 @@ struct cal_dev {
 	/* Camera Core Module handle */
 	struct cal_camerarx	*phy[CAL_NUM_CSI2_PORTS];
 
-	struct cal_ctx		*ctx[CAL_NUM_CONTEXT];
+	u32 num_contexts;
+	struct cal_ctx		*ctx[CAL_MAX_NUM_CONTEXT];
 
 	struct media_device	mdev;
 	struct v4l2_device	v4l2_dev;
 	struct v4l2_async_notifier notifier;
+
+	unsigned long		reserved_pix_proc_mask;
 };
 
 /*
@@ -212,14 +238,20 @@ struct cal_ctx {
 	/* Used to store current pixel format */
 	struct v4l2_format	v_fmt;
 
-	/* Current subdev enumerated format */
+	/* Current subdev enumerated format (legacy) */
 	const struct cal_format_info	**active_fmt;
 	unsigned int		num_active_fmt;
 
 	unsigned int		sequence;
 	struct vb2_queue	vb_vidq;
-	unsigned int		index;
-	unsigned int		cport;
+	u8			dma_ctx;
+	u8			cport;
+	u8			csi2_ctx;
+	u8			pix_proc;
+	u8			vc;
+	u8			datatype;
+
+	bool			use_pix_proc;
 };
 
 extern unsigned int cal_debug;
@@ -237,11 +269,11 @@ extern bool cal_mc_api;
 	dev_err((cal)->dev, fmt, ##arg)
 
 #define ctx_dbg(level, ctx, fmt, arg...)				\
-	cal_dbg(level, (ctx)->cal, "ctx%u: " fmt, (ctx)->index, ##arg)
+	cal_dbg(level, (ctx)->cal, "ctx%u: " fmt, (ctx)->dma_ctx, ##arg)
 #define ctx_info(ctx, fmt, arg...)					\
-	cal_info((ctx)->cal, "ctx%u: " fmt, (ctx)->index, ##arg)
+	cal_info((ctx)->cal, "ctx%u: " fmt, (ctx)->dma_ctx, ##arg)
 #define ctx_err(ctx, fmt, arg...)					\
-	cal_err((ctx)->cal, "ctx%u: " fmt, (ctx)->index, ##arg)
+	cal_err((ctx)->cal, "ctx%u: " fmt, (ctx)->dma_ctx, ##arg)
 
 #define phy_dbg(level, phy, fmt, arg...)				\
 	cal_dbg(level, (phy)->cal, "phy%u: " fmt, (phy)->instance, ##arg)
@@ -297,6 +329,8 @@ struct cal_camerarx *cal_camerarx_create(struct cal_dev *cal,
 					 unsigned int instance);
 void cal_camerarx_destroy(struct cal_camerarx *phy);
 
+int cal_ctx_prepare(struct cal_ctx *ctx);
+void cal_ctx_unprepare(struct cal_ctx *ctx);
 void cal_ctx_set_dma_addr(struct cal_ctx *ctx, dma_addr_t addr);
 void cal_ctx_start(struct cal_ctx *ctx);
 void cal_ctx_stop(struct cal_ctx *ctx);

drivers/media/platform/ti-vpe/cal_regs.h

@@ -72,22 +72,8 @@
 #define CAL_CSI2_TIMING(m)		(0x314U + (m) * 0x80U)
 #define CAL_CSI2_VC_IRQENABLE(m)	(0x318U + (m) * 0x80U)
 #define CAL_CSI2_VC_IRQSTATUS(m)	(0x328U + (m) * 0x80U)
-#define CAL_CSI2_CTX0(m)		(0x330U + (m) * 0x80U)
-#define CAL_CSI2_CTX1(m)		(0x334U + (m) * 0x80U)
-#define CAL_CSI2_CTX2(m)		(0x338U + (m) * 0x80U)
-#define CAL_CSI2_CTX3(m)		(0x33cU + (m) * 0x80U)
-#define CAL_CSI2_CTX4(m)		(0x340U + (m) * 0x80U)
-#define CAL_CSI2_CTX5(m)		(0x344U + (m) * 0x80U)
-#define CAL_CSI2_CTX6(m)		(0x348U + (m) * 0x80U)
-#define CAL_CSI2_CTX7(m)		(0x34cU + (m) * 0x80U)
-#define CAL_CSI2_STATUS0(m)		(0x350U + (m) * 0x80U)
-#define CAL_CSI2_STATUS1(m)		(0x354U + (m) * 0x80U)
-#define CAL_CSI2_STATUS2(m)		(0x358U + (m) * 0x80U)
-#define CAL_CSI2_STATUS3(m)		(0x35cU + (m) * 0x80U)
-#define CAL_CSI2_STATUS4(m)		(0x360U + (m) * 0x80U)
-#define CAL_CSI2_STATUS5(m)		(0x364U + (m) * 0x80U)
-#define CAL_CSI2_STATUS6(m)		(0x368U + (m) * 0x80U)
-#define CAL_CSI2_STATUS7(m)		(0x36cU + (m) * 0x80U)
+#define CAL_CSI2_CTX(phy, csi2_ctx)	(0x330U + (phy) * 0x80U + (csi2_ctx) * 4)
+#define CAL_CSI2_STATUS(phy, csi2_ctx)	(0x350U + (phy) * 0x80U + (csi2_ctx) * 4)
 
 /* CAL CSI2 PHY register offsets */
 #define CAL_CSI2_PHY_REG0		0x000
@@ -139,7 +125,8 @@
 #define CAL_HL_IRQ_EOI_LINE_NUMBER_READ0		0
 #define CAL_HL_IRQ_EOI_LINE_NUMBER_EOI0			0
 
-#define CAL_HL_IRQ_MASK(m)			BIT(m)
+#define CAL_HL_IRQ_WDMA_END_MASK(m)		BIT(m)
+#define CAL_HL_IRQ_WDMA_START_MASK(m)		BIT(m)
 
 #define CAL_HL_IRQ_OCPO_ERR_MASK		BIT(6)
 
@@ -419,32 +406,16 @@
 #define CAL_CSI2_TIMING_STOP_STATE_X16_IO1_MASK		BIT(14)
 #define CAL_CSI2_TIMING_FORCE_RX_MODE_IO1_MASK		BIT(15)
 
-#define CAL_CSI2_VC_IRQ_FS_IRQ_0_MASK			BIT(0)
-#define CAL_CSI2_VC_IRQ_FE_IRQ_0_MASK			BIT(1)
-#define CAL_CSI2_VC_IRQ_LS_IRQ_0_MASK			BIT(2)
-#define CAL_CSI2_VC_IRQ_LE_IRQ_0_MASK			BIT(3)
-#define CAL_CSI2_VC_IRQ_CS_IRQ_0_MASK			BIT(4)
-#define CAL_CSI2_VC_IRQ_ECC_CORRECTION0_IRQ_0_MASK	BIT(5)
-#define CAL_CSI2_VC_IRQ_FS_IRQ_1_MASK			BIT(8)
-#define CAL_CSI2_VC_IRQ_FE_IRQ_1_MASK			BIT(9)
-#define CAL_CSI2_VC_IRQ_LS_IRQ_1_MASK			BIT(10)
-#define CAL_CSI2_VC_IRQ_LE_IRQ_1_MASK			BIT(11)
-#define CAL_CSI2_VC_IRQ_CS_IRQ_1_MASK			BIT(12)
-#define CAL_CSI2_VC_IRQ_ECC_CORRECTION0_IRQ_1_MASK	BIT(13)
-#define CAL_CSI2_VC_IRQ_FS_IRQ_2_MASK			BIT(16)
-#define CAL_CSI2_VC_IRQ_FE_IRQ_2_MASK			BIT(17)
-#define CAL_CSI2_VC_IRQ_LS_IRQ_2_MASK			BIT(18)
-#define CAL_CSI2_VC_IRQ_LE_IRQ_2_MASK			BIT(19)
-#define CAL_CSI2_VC_IRQ_CS_IRQ_2_MASK			BIT(20)
-#define CAL_CSI2_VC_IRQ_ECC_CORRECTION0_IRQ_2_MASK	BIT(21)
-#define CAL_CSI2_VC_IRQ_FS_IRQ_3_MASK			BIT(24)
-#define CAL_CSI2_VC_IRQ_FE_IRQ_3_MASK			BIT(25)
-#define CAL_CSI2_VC_IRQ_LS_IRQ_3_MASK			BIT(26)
-#define CAL_CSI2_VC_IRQ_LE_IRQ_3_MASK			BIT(27)
-#define CAL_CSI2_VC_IRQ_CS_IRQ_3_MASK			BIT(28)
-#define CAL_CSI2_VC_IRQ_ECC_CORRECTION0_IRQ_3_MASK	BIT(29)
+#define CAL_CSI2_VC_IRQ_FS_IRQ_MASK(n)			BIT(0 + ((n) * 8))
+#define CAL_CSI2_VC_IRQ_FE_IRQ_MASK(n)			BIT(1 + ((n) * 8))
+#define CAL_CSI2_VC_IRQ_LS_IRQ_MASK(n)			BIT(2 + ((n) * 8))
+#define CAL_CSI2_VC_IRQ_LE_IRQ_MASK(n)			BIT(3 + ((n) * 8))
+#define CAL_CSI2_VC_IRQ_CS_IRQ_MASK(n)			BIT(4 + ((n) * 8))
+#define CAL_CSI2_VC_IRQ_ECC_CORRECTION_IRQ_MASK(n)	BIT(5 + ((n) * 8))
 
 #define CAL_CSI2_CTX_DT_MASK		GENMASK(5, 0)
+#define CAL_CSI2_CTX_DT_DISABLED	0
+#define CAL_CSI2_CTX_DT_ANY		1
 #define CAL_CSI2_CTX_VC_MASK		GENMASK(7, 6)
 #define CAL_CSI2_CTX_CPORT_MASK		GENMASK(12, 8)
 #define CAL_CSI2_CTX_ATT_MASK		BIT(13)

drivers/media/platform/vsp1/vsp1_entity.c

@@ -676,9 +676,9 @@ int vsp1_entity_init(struct vsp1_device *vsp1, struct vsp1_entity *entity,
 	 * rectangles.
 	 */
 	entity->config = v4l2_subdev_alloc_state(&entity->subdev);
-	if (entity->config == NULL) {
+	if (IS_ERR(entity->config)) {
 		media_entity_cleanup(&entity->subdev.entity);
-		return -ENOMEM;
+		return PTR_ERR(entity->config);
 	}
 
 	return 0;

drivers/media/rc/Kconfig

@@ -246,6 +246,16 @@ config IR_MESON
 	   To compile this driver as a module, choose M here: the
 	   module will be called meson-ir.
 
+config IR_MESON_TX
+	tristate "Amlogic Meson IR TX"
+	depends on ARCH_MESON || COMPILE_TEST
+	help
+	   Say Y if you want to use the IR transmitter available on
+	   Amlogic Meson SoCs.
+
+	   To compile this driver as a module, choose M here: the
+	   module will be called meson-ir-tx.
+
 config IR_MTK
 	tristate "Mediatek IR remote receiver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST

drivers/media/rc/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o
 obj-$(CONFIG_IR_MCEUSB) += mceusb.o
 obj-$(CONFIG_IR_FINTEK) += fintek-cir.o
 obj-$(CONFIG_IR_MESON) += meson-ir.o
+obj-$(CONFIG_IR_MESON_TX) += meson-ir-tx.o
 obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
 obj-$(CONFIG_IR_ENE) += ene_ir.o
 obj-$(CONFIG_IR_REDRAT3) += redrat3.o

drivers/media/rc/ene_ir.c

@@ -1052,7 +1052,7 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 	rdev->device_name = "ENE eHome Infrared Remote Receiver";
 
 	if (dev->hw_learning_and_tx_capable) {
-		rdev->s_learning_mode = ene_set_learning_mode;
+		rdev->s_wideband_receiver = ene_set_learning_mode;
 		init_completion(&dev->tx_complete);
 		rdev->tx_ir = ene_transmit;
 		rdev->s_tx_mask = ene_set_tx_mask;

drivers/media/rc/lirc_dev.c

@@ -412,7 +412,7 @@ static long lirc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			val |= LIRC_CAN_SET_REC_CARRIER |
 				LIRC_CAN_SET_REC_CARRIER_RANGE;
 
-		if (dev->s_learning_mode)
+		if (dev->s_wideband_receiver)
 			val |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
 
 		if (dev->s_carrier_report)
@@ -519,10 +519,10 @@ static long lirc_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		break;
 
 	case LIRC_SET_WIDEBAND_RECEIVER:
-		if (!dev->s_learning_mode)
+		if (!dev->s_wideband_receiver)
 			ret = -ENOTTY;
 		else
-			ret = dev->s_learning_mode(dev, !!val);
+			ret = dev->s_wideband_receiver(dev, !!val);
 		break;
 
 	case LIRC_SET_MEASURE_CARRIER_MODE:

drivers/media/rc/mceusb.c

@@ -1630,7 +1630,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
 		rc->tx_ir = mceusb_tx_ir;
 	}
 	if (ir->flags.rx2 > 0) {
-		rc->s_learning_mode = mceusb_set_rx_wideband;
+		rc->s_wideband_receiver = mceusb_set_rx_wideband;
 		rc->s_carrier_report = mceusb_set_rx_carrier_report;
 	}
 	rc->driver_name = DRIVER_NAME;

drivers/media/rc/meson-ir-tx.c

@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * meson-ir-tx.c - Amlogic Meson IR TX driver
+ *
+ * Copyright (c) 2021, SberDevices. All Rights Reserved.
+ *
+ * Author: Viktor Prutyanov <viktor.prutyanov@phystech.edu>
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <media/rc-core.h>
+
+#define DEVICE_NAME	"Meson IR TX"
+#define DRIVER_NAME	"meson-ir-tx"
+
+#define MIRTX_DEFAULT_CARRIER		38000
+#define MIRTX_DEFAULT_DUTY_CYCLE	50
+#define MIRTX_FIFO_THD			32
+
+#define IRB_MOD_1US_CLK_RATE	1000000
+
+#define IRB_FIFO_LEN	128
+
+#define IRB_ADDR0	0x0
+#define IRB_ADDR1	0x4
+#define IRB_ADDR2	0x8
+#define IRB_ADDR3	0xc
+
+#define IRB_MAX_DELAY	(1 << 10)
+#define IRB_DELAY_MASK	(IRB_MAX_DELAY - 1)
+
+/* IRCTRL_IR_BLASTER_ADDR0 */
+#define IRB_MOD_CLK(x)		((x) << 12)
+#define IRB_MOD_SYS_CLK		0
+#define IRB_MOD_XTAL3_CLK	1
+#define IRB_MOD_1US_CLK		2
+#define IRB_MOD_10US_CLK	3
+#define IRB_INIT_HIGH		BIT(2)
+#define IRB_ENABLE		BIT(0)
+
+/* IRCTRL_IR_BLASTER_ADDR2 */
+#define IRB_MOD_COUNT(lo, hi)	((((lo) - 1) << 16) | ((hi) - 1))
+
+/* IRCTRL_IR_BLASTER_ADDR2 */
+#define IRB_WRITE_FIFO	BIT(16)
+#define IRB_MOD_ENABLE	BIT(12)
+#define IRB_TB_1US	(0x0 << 10)
+#define IRB_TB_10US	(0x1 << 10)
+#define IRB_TB_100US	(0x2 << 10)
+#define IRB_TB_MOD_CLK	(0x3 << 10)
+
+/* IRCTRL_IR_BLASTER_ADDR3 */
+#define IRB_FIFO_THD_PENDING	BIT(16)
+#define IRB_FIFO_IRQ_ENABLE	BIT(8)
+
+struct meson_irtx {
+	struct device *dev;
+	void __iomem *reg_base;
+	u32 *buf;
+	unsigned int buf_len;
+	unsigned int buf_head;
+	unsigned int carrier;
+	unsigned int duty_cycle;
+	/* Locks buf */
+	spinlock_t lock;
+	struct completion completion;
+	unsigned long clk_rate;
+};
+
+static void meson_irtx_set_mod(struct meson_irtx *ir)
+{
+	unsigned int cnt = DIV_ROUND_CLOSEST(ir->clk_rate, ir->carrier);
+	unsigned int pulse_cnt = DIV_ROUND_CLOSEST(cnt * ir->duty_cycle, 100);
+	unsigned int space_cnt = cnt - pulse_cnt;
+
+	dev_dbg(ir->dev, "F_mod = %uHz, T_mod = %luns, duty_cycle = %u%%\n",
+		ir->carrier, NSEC_PER_SEC / ir->clk_rate * cnt,
+		100 * pulse_cnt / cnt);
+
+	writel(IRB_MOD_COUNT(pulse_cnt, space_cnt),
+	       ir->reg_base + IRB_ADDR1);
+}
+
+static void meson_irtx_setup(struct meson_irtx *ir, unsigned int clk_nr)
+{
+	/*
+	 * Disable the TX, set modulator clock tick and set initialize
+	 * output to be high. Set up carrier frequency and duty cycle. Then
+	 * unset initialize output. Enable FIFO interrupt, set FIFO interrupt
+	 * threshold. Finally, enable the transmitter back.
+	 */
+	writel(~IRB_ENABLE & (IRB_MOD_CLK(clk_nr) | IRB_INIT_HIGH),
+	       ir->reg_base + IRB_ADDR0);
+	meson_irtx_set_mod(ir);
+	writel(readl(ir->reg_base + IRB_ADDR0) & ~IRB_INIT_HIGH,
+	       ir->reg_base + IRB_ADDR0);
+	writel(IRB_FIFO_IRQ_ENABLE | MIRTX_FIFO_THD,
+	       ir->reg_base + IRB_ADDR3);
+	writel(readl(ir->reg_base + IRB_ADDR0) | IRB_ENABLE,
+	       ir->reg_base + IRB_ADDR0);
+}
+
+static u32 meson_irtx_prepare_pulse(struct meson_irtx *ir, unsigned int time)
+{
+	unsigned int delay;
+	unsigned int tb = IRB_TB_MOD_CLK;
+	unsigned int tb_us = DIV_ROUND_CLOSEST(USEC_PER_SEC, ir->carrier);
+
+	delay = (DIV_ROUND_CLOSEST(time, tb_us) - 1) & IRB_DELAY_MASK;
+
+	return ((IRB_WRITE_FIFO | IRB_MOD_ENABLE) | tb | delay);
+}
+
+static u32 meson_irtx_prepare_space(struct meson_irtx *ir, unsigned int time)
+{
+	unsigned int delay;
+	unsigned int tb = IRB_TB_100US;
+	unsigned int tb_us = 100;
+
+	if (time <= IRB_MAX_DELAY) {
+		tb = IRB_TB_1US;
+		tb_us = 1;
+	} else if (time <= 10 * IRB_MAX_DELAY) {
+		tb = IRB_TB_10US;
+		tb_us = 10;
+	} else if (time <= 100 * IRB_MAX_DELAY) {
+		tb = IRB_TB_100US;
+		tb_us = 100;
+	}
+
+	delay = (DIV_ROUND_CLOSEST(time, tb_us) - 1) & IRB_DELAY_MASK;
+
+	return ((IRB_WRITE_FIFO & ~IRB_MOD_ENABLE) | tb | delay);
+}
+
+static void meson_irtx_send_buffer(struct meson_irtx *ir)
+{
+	unsigned int nr = 0;
+	unsigned int max_fifo_level = IRB_FIFO_LEN - MIRTX_FIFO_THD;
+
+	while (ir->buf_head < ir->buf_len && nr < max_fifo_level) {
+		writel(ir->buf[ir->buf_head], ir->reg_base + IRB_ADDR2);
+
+		ir->buf_head++;
+		nr++;
+	}
+}
+
+static bool meson_irtx_check_buf(struct meson_irtx *ir,
+				 unsigned int *buf, unsigned int len)
+{
+	unsigned int i;
+
+	for (i = 0; i < len; i++) {
+		unsigned int max_tb_us;
+		/*
+		 * Max space timebase is 100 us.
+		 * Pulse timebase equals to carrier period.
+		 */
+		if (i % 2 == 0)
+			max_tb_us = USEC_PER_SEC / ir->carrier;
+		else
+			max_tb_us = 100;
+
+		if (buf[i] >= max_tb_us * IRB_MAX_DELAY)
+			return false;
+	}
+
+	return true;
+}
+
+static void meson_irtx_fill_buf(struct meson_irtx *ir, u32 *dst_buf,
+				unsigned int *src_buf, unsigned int len)
+{
+	unsigned int i;
+
+	for (i = 0; i < len; i++) {
+		if (i % 2 == 0)
+			dst_buf[i] = meson_irtx_prepare_pulse(ir, src_buf[i]);
+		else
+			dst_buf[i] = meson_irtx_prepare_space(ir, src_buf[i]);
+	}
+}
+
+static irqreturn_t meson_irtx_irqhandler(int irq, void *data)
+{
+	unsigned long flags;
+	struct meson_irtx *ir = data;
+
+	writel(readl(ir->reg_base + IRB_ADDR3) & ~IRB_FIFO_THD_PENDING,
+	       ir->reg_base + IRB_ADDR3);
+
+	if (completion_done(&ir->completion))
+		return IRQ_HANDLED;
+
+	spin_lock_irqsave(&ir->lock, flags);
+	if (ir->buf_head < ir->buf_len)
+		meson_irtx_send_buffer(ir);
+	else
+		complete(&ir->completion);
+	spin_unlock_irqrestore(&ir->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static int meson_irtx_set_carrier(struct rc_dev *rc, u32 carrier)
+{
+	struct meson_irtx *ir = rc->priv;
+
+	if (carrier == 0)
+		return -EINVAL;
+
+	ir->carrier = carrier;
+	meson_irtx_set_mod(ir);
+
+	return 0;
+}
+
+static int meson_irtx_set_duty_cycle(struct rc_dev *rc, u32 duty_cycle)
+{
+	struct meson_irtx *ir = rc->priv;
+
+	ir->duty_cycle = duty_cycle;
+	meson_irtx_set_mod(ir);
+
+	return 0;
+}
+
+static void meson_irtx_update_buf(struct meson_irtx *ir, u32 *buf,
+				  unsigned int len, unsigned int head)
+{
+	ir->buf = buf;
+	ir->buf_len = len;
+	ir->buf_head = head;
+}
+
+static int meson_irtx_transmit(struct rc_dev *rc, unsigned int *buf,
+			       unsigned int len)
+{
+	unsigned long flags;
+	struct meson_irtx *ir = rc->priv;
+	u32 *tx_buf;
+	int ret = len;
+
+	if (!meson_irtx_check_buf(ir, buf, len))
+		return -EINVAL;
+
+	tx_buf = kmalloc_array(len, sizeof(u32), GFP_KERNEL);
+	if (!tx_buf)
+		return -ENOMEM;
+
+	meson_irtx_fill_buf(ir, tx_buf, buf, len);
+	dev_dbg(ir->dev, "TX buffer filled, length = %u\n", len);
+
+	spin_lock_irqsave(&ir->lock, flags);
+	meson_irtx_update_buf(ir, tx_buf, len, 0);
+	reinit_completion(&ir->completion);
+	meson_irtx_send_buffer(ir);
+	spin_unlock_irqrestore(&ir->lock, flags);
+
+	if (!wait_for_completion_timeout(&ir->completion,
+					 usecs_to_jiffies(IR_MAX_DURATION)))
+		ret = -ETIMEDOUT;
+
+	spin_lock_irqsave(&ir->lock, flags);
+	kfree(ir->buf);
+	meson_irtx_update_buf(ir, NULL, 0, 0);
+	spin_unlock_irqrestore(&ir->lock, flags);
+
+	return ret;
+}
+
+static int meson_irtx_mod_clock_probe(struct meson_irtx *ir,
+				      unsigned int *clk_nr)
+{
+	struct device_node *np = ir->dev->of_node;
+	struct clk *clock;
+
+	if (!np)
+		return -ENODEV;
+
+	clock = devm_clk_get(ir->dev, "xtal");
+	if (IS_ERR(clock) || clk_prepare_enable(clock))
+		return -ENODEV;
+
+	*clk_nr = IRB_MOD_XTAL3_CLK;
+	ir->clk_rate = clk_get_rate(clock) / 3;
+
+	if (ir->clk_rate < IRB_MOD_1US_CLK_RATE) {
+		*clk_nr = IRB_MOD_1US_CLK;
+		ir->clk_rate = IRB_MOD_1US_CLK_RATE;
+	}
+
+	dev_info(ir->dev, "F_clk = %luHz\n", ir->clk_rate);
+
+	return 0;
+}
+
+static int __init meson_irtx_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct meson_irtx *ir;
+	struct rc_dev *rc;
+	int irq;
+	unsigned int clk_nr;
+	int ret;
+
+	ir = devm_kzalloc(dev, sizeof(*ir), GFP_KERNEL);
+	if (!ir)
+		return -ENOMEM;
+
+	ir->reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ir->reg_base))
+		return PTR_ERR(ir->reg_base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "no irq resource found\n");
+		return -ENODEV;
+	}
+
+	ir->dev = dev;
+	ir->carrier = MIRTX_DEFAULT_CARRIER;
+	ir->duty_cycle = MIRTX_DEFAULT_DUTY_CYCLE;
+	init_completion(&ir->completion);
+	spin_lock_init(&ir->lock);
+
+	ret = meson_irtx_mod_clock_probe(ir, &clk_nr);
+	if (ret) {
+		dev_err(dev, "modulator clock setup failed\n");
+		return ret;
+	}
+	meson_irtx_setup(ir, clk_nr);
+
+	ret = devm_request_irq(dev, irq,
+			       meson_irtx_irqhandler,
+			       IRQF_TRIGGER_RISING,
+			       DRIVER_NAME, ir);
+	if (ret) {
+		dev_err(dev, "irq request failed\n");
+		return ret;
+	}
+
+	rc = rc_allocate_device(RC_DRIVER_IR_RAW_TX);
+	if (!rc)
+		return -ENOMEM;
+
+	rc->driver_name = DRIVER_NAME;
+	rc->device_name = DEVICE_NAME;
+	rc->priv = ir;
+
+	rc->tx_ir = meson_irtx_transmit;
+	rc->s_tx_carrier = meson_irtx_set_carrier;
+	rc->s_tx_duty_cycle = meson_irtx_set_duty_cycle;
+
+	ret = rc_register_device(rc);
+	if (ret < 0) {
+		dev_err(dev, "rc_dev registration failed\n");
+		rc_free_device(rc);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, rc);
+
+	return 0;
+}
+
+static int meson_irtx_remove(struct platform_device *pdev)
+{
+	struct rc_dev *rc = platform_get_drvdata(pdev);
+
+	rc_unregister_device(rc);
+
+	return 0;
+}
+
+static const struct of_device_id meson_irtx_dt_match[] = {
+	{
+		.compatible = "amlogic,meson-g12a-ir-tx",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, meson_irtx_dt_match);
+
+static struct platform_driver meson_irtx_pd = {
+	.remove = meson_irtx_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner  = THIS_MODULE,
+		.of_match_table = meson_irtx_dt_match,
+	},
+};
+
+module_platform_driver_probe(meson_irtx_pd, meson_irtx_probe);
+
+MODULE_DESCRIPTION("Meson IR TX driver");
+MODULE_AUTHOR("Viktor Prutyanov <viktor.prutyanov@phystech.edu>");
+MODULE_LICENSE("GPL");

drivers/media/rc/rc-loopback.c

@@ -15,12 +15,9 @@
 #include <linux/slab.h>
 #include <media/rc-core.h>
 
-#define DRIVER_NAME	"rc-loopback"
-#define dprintk(x...)	if (debug) printk(KERN_INFO DRIVER_NAME ": " x)
-#define RXMASK_REGULAR	0x1
-#define RXMASK_LEARNING	0x2
-
-static bool debug;
+#define DRIVER_NAME		"rc-loopback"
+#define RXMASK_NARROWBAND	0x1
+#define RXMASK_WIDEBAND		0x2
 
 struct loopback_dev {
 	struct rc_dev *dev;
@@ -28,7 +25,7 @@ struct loopback_dev {
 	u32 txcarrier;
 	u32 txduty;
 	bool idle;
-	bool learning;
+	bool wideband;
 	bool carrierreport;
 	u32 rxcarriermin;
 	u32 rxcarriermax;
@@ -40,12 +37,12 @@ static int loop_set_tx_mask(struct rc_dev *dev, u32 mask)
 {
 	struct loopback_dev *lodev = dev->priv;
 
-	if ((mask & (RXMASK_REGULAR | RXMASK_LEARNING)) != mask) {
-		dprintk("invalid tx mask: %u\n", mask);
-		return -EINVAL;
+	if ((mask & (RXMASK_NARROWBAND | RXMASK_WIDEBAND)) != mask) {
+		dev_dbg(&dev->dev, "invalid tx mask: %u\n", mask);
+		return 2;
 	}
 
-	dprintk("setting tx mask: %u\n", mask);
+	dev_dbg(&dev->dev, "setting tx mask: %u\n", mask);
 	lodev->txmask = mask;
 	return 0;
 }
@@ -54,7 +51,7 @@ static int loop_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 {
 	struct loopback_dev *lodev = dev->priv;
 
-	dprintk("setting tx carrier: %u\n", carrier);
+	dev_dbg(&dev->dev, "setting tx carrier: %u\n", carrier);
 	lodev->txcarrier = carrier;
 	return 0;
 }
@@ -64,11 +61,11 @@ static int loop_set_tx_duty_cycle(struct rc_dev *dev, u32 duty_cycle)
 	struct loopback_dev *lodev = dev->priv;
 
 	if (duty_cycle < 1 || duty_cycle > 99) {
-		dprintk("invalid duty cycle: %u\n", duty_cycle);
+		dev_dbg(&dev->dev, "invalid duty cycle: %u\n", duty_cycle);
 		return -EINVAL;
 	}
 
-	dprintk("setting duty cycle: %u\n", duty_cycle);
+	dev_dbg(&dev->dev, "setting duty cycle: %u\n", duty_cycle);
 	lodev->txduty = duty_cycle;
 	return 0;
 }
@@ -78,11 +75,11 @@ static int loop_set_rx_carrier_range(struct rc_dev *dev, u32 min, u32 max)
 	struct loopback_dev *lodev = dev->priv;
 
 	if (min < 1 || min > max) {
-		dprintk("invalid rx carrier range %u to %u\n", min, max);
+		dev_dbg(&dev->dev, "invalid rx carrier range %u to %u\n", min, max);
 		return -EINVAL;
 	}
 
-	dprintk("setting rx carrier range %u to %u\n", min, max);
+	dev_dbg(&dev->dev, "setting rx carrier range %u to %u\n", min, max);
 	lodev->rxcarriermin = min;
 	lodev->rxcarriermax = max;
 	return 0;
@@ -97,25 +94,33 @@ static int loop_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count)
 
 	if (lodev->txcarrier < lodev->rxcarriermin ||
 	    lodev->txcarrier > lodev->rxcarriermax) {
-		dprintk("ignoring tx, carrier out of range\n");
+		dev_dbg(&dev->dev, "ignoring tx, carrier out of range\n");
 		goto out;
 	}
 
-	if (lodev->learning)
-		rxmask = RXMASK_LEARNING;
+	if (lodev->wideband)
+		rxmask = RXMASK_WIDEBAND;
 	else
-		rxmask = RXMASK_REGULAR;
+		rxmask = RXMASK_NARROWBAND;
 
 	if (!(rxmask & lodev->txmask)) {
-		dprintk("ignoring tx, rx mask mismatch\n");
+		dev_dbg(&dev->dev, "ignoring tx, rx mask mismatch\n");
 		goto out;
 	}
 
 	for (i = 0; i < count; i++) {
 		rawir.pulse = i % 2 ? false : true;
 		rawir.duration = txbuf[i];
-		if (rawir.duration)
-			ir_raw_event_store_with_filter(dev, &rawir);
+
+		ir_raw_event_store_with_filter(dev, &rawir);
+	}
+
+	if (lodev->carrierreport) {
+		rawir.pulse = false;
+		rawir.carrier_report = true;
+		rawir.carrier = lodev->txcarrier;
+
+		ir_raw_event_store(dev, &rawir);
 	}
 
 	/* Fake a silence long enough to cause us to go idle */
@@ -134,18 +139,18 @@ static void loop_set_idle(struct rc_dev *dev, bool enable)
 	struct loopback_dev *lodev = dev->priv;
 
 	if (lodev->idle != enable) {
-		dprintk("%sing idle mode\n", enable ? "enter" : "exit");
+		dev_dbg(&dev->dev, "%sing idle mode\n", enable ? "enter" : "exit");
 		lodev->idle = enable;
 	}
 }
 
-static int loop_set_learning_mode(struct rc_dev *dev, int enable)
+static int loop_set_wideband_receiver(struct rc_dev *dev, int enable)
 {
 	struct loopback_dev *lodev = dev->priv;
 
-	if (lodev->learning != enable) {
-		dprintk("%sing learning mode\n", enable ? "enter" : "exit");
-		lodev->learning = !!enable;
+	if (lodev->wideband != enable) {
+		dev_dbg(&dev->dev, "using %sband receiver\n", enable ? "wide" : "narrow");
+		lodev->wideband = !!enable;
 	}
 
 	return 0;
@@ -156,7 +161,7 @@ static int loop_set_carrier_report(struct rc_dev *dev, int enable)
 	struct loopback_dev *lodev = dev->priv;
 
 	if (lodev->carrierreport != enable) {
-		dprintk("%sabling carrier reports\n", enable ? "en" : "dis");
+		dev_dbg(&dev->dev, "%sabling carrier reports\n", enable ? "en" : "dis");
 		lodev->carrierreport = !!enable;
 	}
 
@@ -204,10 +209,8 @@ static int __init loop_init(void)
 	int ret;
 
 	rc = rc_allocate_device(RC_DRIVER_IR_RAW);
-	if (!rc) {
-		printk(KERN_ERR DRIVER_NAME ": rc_dev allocation failed\n");
+	if (!rc)
 		return -ENOMEM;
-	}
 
 	rc->device_name		= "rc-core loopback device";
 	rc->input_phys		= "rc-core/virtual";
@@ -219,9 +222,9 @@ static int __init loop_init(void)
 	rc->allowed_protocols	= RC_PROTO_BIT_ALL_IR_DECODER;
 	rc->allowed_wakeup_protocols = RC_PROTO_BIT_ALL_IR_ENCODER;
 	rc->encode_wakeup	= true;
-	rc->timeout		= MS_TO_US(100); /* 100 ms */
+	rc->timeout		= IR_DEFAULT_TIMEOUT;
 	rc->min_timeout		= 1;
-	rc->max_timeout		= UINT_MAX;
+	rc->max_timeout		= IR_MAX_TIMEOUT;
 	rc->rx_resolution	= 1;
 	rc->tx_resolution	= 1;
 	rc->s_tx_mask		= loop_set_tx_mask;
@@ -230,22 +233,22 @@ static int __init loop_init(void)
 	rc->s_rx_carrier_range	= loop_set_rx_carrier_range;
 	rc->tx_ir		= loop_tx_ir;
 	rc->s_idle		= loop_set_idle;
-	rc->s_learning_mode	= loop_set_learning_mode;
+	rc->s_wideband_receiver	= loop_set_wideband_receiver;
 	rc->s_carrier_report	= loop_set_carrier_report;
 	rc->s_wakeup_filter	= loop_set_wakeup_filter;
 
-	loopdev.txmask		= RXMASK_REGULAR;
+	loopdev.txmask		= RXMASK_NARROWBAND;
 	loopdev.txcarrier	= 36000;
 	loopdev.txduty		= 50;
 	loopdev.rxcarriermin	= 1;
 	loopdev.rxcarriermax	= ~0;
 	loopdev.idle		= true;
-	loopdev.learning	= false;
+	loopdev.wideband	= false;
 	loopdev.carrierreport	= false;
 
 	ret = rc_register_device(rc);
 	if (ret < 0) {
-		printk(KERN_ERR DRIVER_NAME ": rc_dev registration failed\n");
+		dev_err(&rc->dev, "rc_dev registration failed\n");
 		rc_free_device(rc);
 		return ret;
 	}
@@ -262,9 +265,6 @@ static void __exit loop_exit(void)
 module_init(loop_init);
 module_exit(loop_exit);
 
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debug messages");
-
 MODULE_DESCRIPTION("Loopback device for rc-core debugging");
 MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
 MODULE_LICENSE("GPL");

drivers/media/rc/rc-main.c

@@ -1940,7 +1940,7 @@ int rc_register_device(struct rc_dev *dev)
 	kfree(path);
 
 	/*
-	 * once the the input device is registered in rc_setup_rx_device,
+	 * once the input device is registered in rc_setup_rx_device,
 	 * userspace can open the input device and rc_open() will be called
 	 * as a result. This results in driver code being allowed to submit
 	 * keycodes with rc_keydown, so lirc must be registered first.

drivers/media/rc/redrat3.c

@@ -6,7 +6,7 @@
  *  based heavily on the work of Stephen Cox, with additional
  *  help from RedRat Ltd.
  *
- * This driver began life based an an old version of the first-generation
+ * This driver began life based on an old version of the first-generation
  * lirc_mceusb driver from the lirc 0.7.2 distribution. It was then
  * significantly rewritten by Stephen Cox with the aid of RedRat Ltd's
  * Chris Dodge.

drivers/media/rc/streamzap.c

@@ -265,8 +265,6 @@ static void streamzap_callback(struct urb *urb)
 
 	ir_raw_event_handle(sz->rdev);
 	usb_submit_urb(urb, GFP_ATOMIC);
-
-	return;
 }
 
 static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)

drivers/media/spi/cxd2880-spi.c

@@ -524,13 +524,13 @@ cxd2880_spi_probe(struct spi_device *spi)
 	if (IS_ERR(dvb_spi->vcc_supply)) {
 		if (PTR_ERR(dvb_spi->vcc_supply) == -EPROBE_DEFER) {
 			ret = -EPROBE_DEFER;
-			goto fail_adapter;
+			goto fail_regulator;
 		}
 		dvb_spi->vcc_supply = NULL;
 	} else {
 		ret = regulator_enable(dvb_spi->vcc_supply);
 		if (ret)
-			goto fail_adapter;
+			goto fail_regulator;
 	}
 
 	dvb_spi->spi = spi;
@@ -618,6 +618,9 @@ cxd2880_spi_probe(struct spi_device *spi)
 fail_attach:
 	dvb_unregister_adapter(&dvb_spi->adapter);
 fail_adapter:
+	if (!dvb_spi->vcc_supply)
+		regulator_disable(dvb_spi->vcc_supply);
+fail_regulator:
 	kfree(dvb_spi);
 	return ret;
 }

drivers/media/test-drivers/vivid/vivid-cec.c

@@ -282,5 +282,5 @@ struct cec_adapter *vivid_cec_alloc_adap(struct vivid_dev *dev,
 	snprintf(name, sizeof(name), "vivid-%03d-vid-%s%d",
 		 dev->inst, is_source ? "out" : "cap", idx);
 	return cec_allocate_adapter(&vivid_cec_adap_ops, dev,
-		name, caps, 1);
+				    name, caps, CEC_MAX_LOG_ADDRS);
 }

drivers/media/usb/dvb-usb-v2/Kconfig

@@ -34,6 +34,8 @@ config DVB_USB_AF9035
 	tristate "Afatech AF9035 DVB-T USB2.0 support"
 	depends on DVB_USB_V2
 	select DVB_AF9033
+	select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_TUA9001 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_FC0011 if MEDIA_SUBDRV_AUTOSELECT
 	select MEDIA_TUNER_MXL5007T if MEDIA_SUBDRV_AUTOSELECT

drivers/media/usb/dvb-usb-v2/af9035.c

@@ -210,6 +210,7 @@ static int af9035_add_i2c_dev(struct dvb_usb_device *d, const char *type,
 	/* register I2C device */
 	client = i2c_new_client_device(adapter, &board_info);
 	if (!i2c_client_has_driver(client)) {
+		dev_err(&intf->dev, "failed to bind i2c device to %s driver\n", type);
 		ret = -ENODEV;
 		goto err;
 	}

drivers/media/usb/dvb-usb-v2/dvbsky.c

@@ -541,7 +541,9 @@ static int dvbsky_mygica_t230c_attach(struct dvb_usb_adapter *adap)
 	si2168_config.i2c_adapter = &i2c_adapter;
 	si2168_config.fe = &adap->fe[0];
 	si2168_config.ts_mode = SI2168_TS_PARALLEL;
-	if (le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_MYGICA_T230C2)
+	if (le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_MYGICA_T230C2 ||
+	    le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_MYGICA_T230C2_LITE ||
+	    le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_MYGICA_T230A)
 		si2168_config.ts_mode |= SI2168_TS_CLK_MANUAL;
 	si2168_config.ts_clock_inv = 1;
 
@@ -577,15 +579,24 @@ static int dvbsky_mygica_t230c_attach(struct dvb_usb_adapter *adap)
 
 static int dvbsky_identify_state(struct dvb_usb_device *d, const char **name)
 {
-	dvbsky_gpio_ctrl(d, 0x04, 1);
-	msleep(20);
-	dvbsky_gpio_ctrl(d, 0x83, 0);
-	dvbsky_gpio_ctrl(d, 0xc0, 1);
-	msleep(100);
-	dvbsky_gpio_ctrl(d, 0x83, 1);
-	dvbsky_gpio_ctrl(d, 0xc0, 0);
-	msleep(50);
-
+	if (le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_MYGICA_T230A) {
+		dvbsky_gpio_ctrl(d, 0x87, 0);
+		msleep(20);
+		dvbsky_gpio_ctrl(d, 0x86, 1);
+		dvbsky_gpio_ctrl(d, 0x80, 0);
+		msleep(100);
+		dvbsky_gpio_ctrl(d, 0x80, 1);
+		msleep(50);
+	} else {
+		dvbsky_gpio_ctrl(d, 0x04, 1);
+		msleep(20);
+		dvbsky_gpio_ctrl(d, 0x83, 0);
+		dvbsky_gpio_ctrl(d, 0xc0, 1);
+		msleep(100);
+		dvbsky_gpio_ctrl(d, 0x83, 1);
+		dvbsky_gpio_ctrl(d, 0xc0, 0);
+		msleep(50);
+	}
 	return WARM;
 }
 
@@ -789,6 +800,12 @@ static const struct usb_device_id dvbsky_id_table[] = {
 	{ DVB_USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230C2,
 		&mygica_t230c_props, "MyGica Mini DVB-(T/T2/C) USB Stick T230C v2",
 		RC_MAP_TOTAL_MEDIA_IN_HAND_02) },
+	{ DVB_USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230C2_LITE,
+		 &mygica_t230c_props, "MyGica Mini DVB-(T/T2/C) USB Stick T230C v2  Lite",
+		 NULL) },
+	{ DVB_USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230A,
+		 &mygica_t230c_props, "MyGica Mini DVB-(T/T2/C) USB Stick T230A",
+		 NULL) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, dvbsky_id_table);

drivers/media/usb/dvb-usb/dvb-usb-i2c.c

@@ -17,7 +17,8 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d)
 
 	if (d->props.i2c_algo == NULL) {
 		err("no i2c algorithm specified");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
 	}
 
 	strscpy(d->i2c_adap.name, d->desc->name, sizeof(d->i2c_adap.name));
@@ -27,11 +28,15 @@ int dvb_usb_i2c_init(struct dvb_usb_device *d)
 
 	i2c_set_adapdata(&d->i2c_adap, d);
 
-	if ((ret = i2c_add_adapter(&d->i2c_adap)) < 0)
+	ret = i2c_add_adapter(&d->i2c_adap);
+	if (ret < 0) {
 		err("could not add i2c adapter");
+		goto err;
+	}
 
 	d->state |= DVB_USB_STATE_I2C;
 
+err:
 	return ret;
 }