Simply enabling CONFIG_KEYSTONE_USB_PHY doesn't work anymore
as it depends on CONFIG_NOP_USB_XCEIV. We need to enable
that as well.
This fixes USB on Keystone boards from v4.8-rc1 onwards.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Select CONFIG_SND_SOC_WM8960 so that we can have audio functional
by default on imx6ul-evk and imx7-sdb boards.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This alters the OMAP2plus defconfig to use the IIO BMP280
driver, which is compatible with the BMP085 instead of the old
BMP085-specific misc driver. The IIO driver nowadays have all
the features of the old driver and more.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This enables UBI+UBIFS to handle the NAND MTDs, including the useful
MTD_UBI_BLOCK.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The schedutil CPUFreq governor could be built as a module but the change
"cpufreq / sched: Pass flags to cpufreq_update_util()" made it
non-modular so attempting to enable as module leads to a warning:
warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The schedutil CPUFreq governor could be built as a module but the change
"cpufreq / sched: Pass flags to cpufreq_update_util()" made it
non-modular so attempting to enable as module leads to a warning:
warning: symbol value 'm' invalid for CPU_FREQ_GOV_SCHEDUTIL
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
This enables the use of the memory/ti-aemif.c driver.
ATM most davinci boards use the mach-davinci aemif code which gets in
the way of genericity and proper DT boot.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Systemd already supports seccomp. It seems some distros are building
systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors:
systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Systemd already supports seccomp. It seems some distros are building
systemd with seccomp, e.g. Arch on ARM, thus leading to boot errors:
systemd-logind.service: Failed at step SECCOMP spawning /usr/lib/systemd/systemd-logind: Invalid argument
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Add MPL3115 NXP pressure sensor configuration.
This sensor is used by warp7 board.
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Select CONFIG_DRM_ETNAVIV, so that GPU support can be enabled by default.
Generated by manually selecting CONFIG_DRM_ETNAVIV and
then running:
make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig
,which results in additional cleanup.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Option is long gone, see
5d9efa7ee9 ("ipv6: Remove privacy config option.")
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
PM_DEBUG and PM_ADVANCED_DEBUG bring some information useful for
development and they should not cause any significant overhead. Enable
them in default configuration so debugging would be slightly easier.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Kukjin Kim <kgene@kernel.org>
This patch enables the bus frequency scaling driver with devfreq and
devfreq-event framework. Devfreq is already supported on Odroid U3/XU3,
Trats2 and Rinato/Monk boards.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[k.kozlowski: Don't enable symbols already selected, adjust commit msg]
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
This patch moves SOC_IMX1 into 'Device tree only' category and renames
imx1-dt.c to mach-imx1.c to align with the name schema of other
i.MX DT only platforms.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Synertronixx SCB9328 board is very similar to Armadeus APF9328,
so it can be easily reimplemented in DT way.
This patch removes support for non-DT support for this board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
mach-apf9328.c can be replaced with devicetree equivalent: imx1-apf9328.dts,
so remove the board file.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- USB test module
- USB gadget functions using configfs which are just ready within
several release cycles.
- USB audio gadget
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The LCDK embeds a LAN8710.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This driver handles the RTC of most davinci SoCs.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This patch disables deprecated IDE subsystem in trizeps4_defconfig
(ide-cs host driver is selected in this config but pata_pcmcia
libata PATA host driver is also selected so ide-cs is redundant
and can be disabled together with the whole IDE subsystem).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in pxa255-idp_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in lpd270_defconfig
(no IDE host drivers are selected in this config so there is no
valid reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
This patch disables deprecated IDE subsystem in colibri_pxa270_defconfig
(no IDE host drivers are selected in this config so there is no valid
reason to enable IDE subsystem itself).
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
If both legacy and device-tree machines are mixed in the same defconfig,
the legacy boards don't boot up anymore with gpio request deferral
errors.
This is seen when attempting to run akita, borzoi, spitz, terrier, or
tosa in qemu with pxa_defconfig.
The real reason behind is that gpio handling for pxa in its current
state cannot be built for _both_ a devicetree machine (ie. pxa-dt.c) and
a non devicetree machine (ie. corgi, tosa, ...).
This is turn is because for devicetree a pinctrl is enforced for the
machine, and a pinctrl driver is required. If it's not available,
pxa_gpio_request() fails on pinctrl_request_gpio() and returns
-EPROBE_DEFER. It was introduced by commit f806dac593
("ARM: pxa: activate pinctrl for device-tree machines").
Now the true chicken and egg problem is than machine files,
ie. arch/arm/mach-pxa/xxx.c are using gpio before the drivers are
probed, in the init_machine() function, and that's why pinctrl/gpio for
legacy machine files is a bit difficult.
As for now, to keep the compilation coverage and testing of legacy
machines, this patch removes the 2 devicetree machines from
pxa_defconfig.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Guenter Roeck <linux@roeck-us.net>
The Wandboard Quad can make use of the cpufreq support provided by the
driver. Enable it and its dependency, REGULATOR_ANATOP, by default.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Wandboard Quad comes with a SATA port. Enable the IMX SATA driver by
default to make it easy to have the root filesystem on it.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
UBIFS is commonly used on Marvell EBU v7 platforms to store the root
file-system, so it makes sense to have those options enabled by default
in mvebu_v7_defconfig.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Marvell EBU v7 platforms contain various MTD devices, therefore it makes
sense to allow configuring the MTD partition tables via the kernel command
line.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Build audio support for DA850-based devices as modules in the default
defconfig.
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
It's been awhile since a cleanup was done. Regenerate the default settings by
$ make davinci_all_config
$ make savedefconfig
$ cp defconfig arch/arm/configs/davinci_all_defconfig
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The patch that this was preparing for made it into neither v4.7 nor
v4.8, so we should back this out as well to avoid the opposite
warning:
arch/arm/configs/aspeed_g5_defconfig:62:warning: symbol value '1' invalid for PRINTK_TIME
arch/arm/configs/aspeed_g4_defconfig:61:warning: symbol value '1' invalid for PRINTK_TIME
Sorry for not catching this earlier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 0ef659a300 ("ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME")
Cc: stable@vger.kernel.org # v4.7
Defconfig additions, removals, etc. Most of these are small changes adding
the options for newly upstreamed drivers, or drivers needed for new board
support.
- Removed Broadcom bcm_defconfig, targets are all covered in multi_v7_defconfig
- New defconfig: multi_v4t_defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jRHp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Defconfig additions, removals, etc.
Most of these are small changes adding the options for newly
upstreamed drivers, or drivers needed for new board support.
- removed Broadcom bcm_defconfig, targets are all covered in
multi_v7_defconfig
- new defconfig: multi_v4t_defconfig"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
ARM: multi_v7_defconfig: enable STMicroelectronics DRM Support
ARM: multi_v7_defconfig: enable STMicroelectronics BDISP 2D blitter driver
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working
ARM: configs: lpc18xx: enable adc and dac iio drivers
ARM: config: Add a multi_v4t_defconfig
ARM: multi_v7_defconfig: add ACT8945A
ARM: at91/defconfig: Add ACT8945A driver
ARM: imx_v6_v7_defconfig: Select ADS7846 support
ARM: configs: qualcomm: Add MDM9615 missing defconfigs
ARM: multi_v7_defconfig: Enable vivid driver as a module
ARM: exynos_defconfig: Enable vivid driver as a module
ARM: defconfig: enable the MSM8660 pin controller
ARM: imx_v6_v7_defconfig: enable USB FFS gadget
ARM: socfpga: enable PL330 DMA in socfpga_defconfig
ARM: socfpga: add PCIe to socfpga_defconfig
ARM: multi_v7_defconfig: defconfig: Enable r8a7792 SoC
ARM: shmobile: defconfig: Enable r8a7792 SoC
ARM: Remove bcm_defconfig
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
...
Kconfig dependencies for v4.8 merge window. Otherwise things
like USB Ethernet on omap3 beagle, omap4 panda and omap5-uevm
won't work without manual configuration.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXg1ijAAoJEBvUPslcq6VzG4YP/1fHehNHXf/+JgAHFbpL2hm+
57fpjnmxnB7maFGdhz72PKP1vi4APyZUrgzOxuft4IcVgAN71jTeO8B5Oj2ROAn7
TyB99ob5OJ7/uzUSOsIUSDvGw+F0+bL6jj2X7vBphPF740QY3wOacchVBXzOLewc
QN9PfivuJDLmk1+rm9iFZcO7uIOBiIiUH3D+KwIcWt2M4EfFMNJZlXYK+vHwCXOJ
xCRBXzV53wNOZYcEdRSW2qPJ1qnZGbx4N4NybAGmjeREPpgP9sJxE4sHcdnTR8hR
AymoNJa/5GPK0qnRik1MkOLRNrGnOi89zn36LTJnmZ+mDrqp6yBpYrGw+I6yJ2Kc
rspkgDitjklQQHu0DdXojtxXNKaU9aAhKdlc7ILD/LMaAjAgiDMRegohZ3mFbpOH
KeUpuC1C8YclNwvGSV1ZizQzFESP3MGLx9j/THFnr5k6Ef5N70L8Yo+jvhMw6mxY
YBmi5dcY+xqds5SOGbbkLfnbqEJzJwV5gYKgQ2qIGxkSpP3PHxAtao+LSUT5U2it
N4FJi4Aqv2V04A3NCxd2zYxqPukxaIR93wpWV7YgfpAfhMPbz88LIZBnj9c3Fe9X
EtPikpDhXu4aJV/BSiqOPYKrvWmcpXPI/1pNBt1unA9DG/heBLrwp6igwWgzXInh
+ZwKaZ/5AJlyVphgsO0r
=8O1H
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.8/defconfig-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "omap2plus_defconfig fix for v4.8 merge window" from Tony Lindgren:
A defconfig update for omap2plus_defconfig to fix changed USB
Kconfig dependencies for v4.8 merge window. Otherwise things
like USB Ethernet on omap3 beagle, omap4 panda and omap5-uevm
won't work without manual configuration.
* tag 'omap-for-v4.8/defconfig-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working
Enable ADC and DAC IIO drivers for LPC18xx/43xx SoCs.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Two patches to enable the DRM driver in the sunxi and multi_v7 defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CrDC
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Merge "Allwinner defconfig changes for 4.8" from Maxime Ripard:
Two patches to enable the DRM driver in the sunxi and multi_v7 defconfig.
* tag 'sunxi-defconfig-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: sunxi: Enable sun4i DRM driver
ARM: multi_v7: Enable sun4i DRM driver
* Enable newly added support for r8a7792 SoC in multi_v7 and shmobile
defconfigs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=f6TZ
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Renesas ARM Based SoC Defconfig Updates for v4.8
* Enable newly added support for r8a7792 SoC in multi_v7 and shmobile
defconfigs
* tag 'renesas-defconfig-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: multi_v7_defconfig: defconfig: Enable r8a7792 SoC
ARM: shmobile: defconfig: Enable r8a7792 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
To allow regression build testing of multi v4t systems, add a
multi_v4t_defconfig, similar to the multi_v5(v7)_defconfig.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Enable Virtual Video Test Driver on nulti_v7 and exynos defconfigs.
Useful for testing.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9A1f
-----END PGP SIGNATURE-----
Merge tag 'samsung-defconfig-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig
Samsung defconfig update for v4.8, part 2:
1. Enable Virtual Video Test Driver on nulti_v7 and exynos defconfigs.
Useful for testing.
* tag 'samsung-defconfig-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: multi_v7_defconfig: Enable vivid driver as a module
ARM: exynos_defconfig: Enable vivid driver as a module
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable TOUCHSCREEN_ADS7846, USB_FUNCTIONFS and USB_USBNET support
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXcm6FAAoJEFBXWFqHsHzOdFEH/jF1mfZbRBYDjkLsg6H++MJ1
q/Yd8GTahIgIQyjAglBbiF5nLnLD6OK03HPu4M5H7fBo/tS6Og5Tk8LshwXzEucZ
eAC6/5iDRlY1AgdFrdxhXqGwVyG04dgK553PQijCR5GSZ9MMhQO9JFJ49Lf64FuV
TqZ0VPDUO7fw0qlE7yqd1JWy1SHa5LthRxUpx8gJUk+6nqJVQO26Ciga1BP6uSsB
5nprCGpWo00Hfn6hMHqWXCyOm4vaWPq+N2E9aHFdo6VNnAIZxbqvYJ3RpfDu1UfV
PoCoRVaNSfqEIr5yaliMykXI96U8gbLfoWXf/E4K08/Z9uB0gyIqbXCmvHoMhC0=
=EWUm
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
The i.MX defconfig update for 4.8:
- Enable TOUCHSCREEN_ADS7846, USB_FUNCTIONFS and USB_USBNET support
* tag 'imx-defconfig-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Select ADS7846 support
ARM: imx_v6_v7_defconfig: enable USB FFS gadget
ARM: imx_v6_v7_defconfig: build in usbnet to support NFS for non-ethernet board
Signed-off-by: Olof Johansson <olof@lixom.net>
ACT8945A is the PMIC present on the sama5d2 Xplained.
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Include ACT8945A mfd, regulator and power drivers.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'
Signed-off-by: Stephan Linz <linz@li-pro.net>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
The Virtual Video Test Driver can be used to emulate video capture and
output devices so it's very useful for testing. Since is not necessary
to boot, can be enabled as module to avoid increasing the kernel size.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
After enabling this I get pins, GPIO, keys and everything on
the MSM8660 surf (APQ8660 DragonBoard).
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable the PL330 DMA and DMATEST on SoCFPGA.
make savedefconfig says CONFIG_FHANDLE is not needed in the defconfig,
remove it.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v2: Also enable DMATEST as a kernel module
- Florian enables support for the BCM63xx DSL SoCs basic peripherals, enables
the networking subsystems for Set Top Box SoCs, enables the PWM, watchdog and
the AHCI controller and SATA PHY drivers
- Florian removes the bcm_defconfig file which is no longer useful and updates
multi_v7_defconfig to include the Kona watchdog to provide proper reboot for the
Broadcom Kona platforms
Please note that Tejun Heo has queued a patch which renames AHCI_BRCMSTB into
AHCI_BRCM, to avoid two patches in a row, we just enable AHCI_BRCM to be future
proof
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vr6G
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.8/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
This pull request contains defconfig changes for Broadcom ARM-based SoCs:
- Florian enables support for the BCM63xx DSL SoCs basic peripherals, enables
the networking subsystems for Set Top Box SoCs, enables the PWM, watchdog and
the AHCI controller and SATA PHY drivers
- Florian removes the bcm_defconfig file which is no longer useful and updates
multi_v7_defconfig to include the Kona watchdog to provide proper reboot for the
Broadcom Kona platforms
Please note that Tejun Heo has queued a patch which renames AHCI_BRCMSTB into
AHCI_BRCM, to avoid two patches in a row, we just enable AHCI_BRCM to be future
proof
* tag 'arm-soc/for-4.8/defconfig' of http://github.com/Broadcom/stblinux:
ARM: Remove bcm_defconfig
ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
ARM: multi_v7_defconfig: Enable Broadcom STB PWM
ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
ARM: multi_v7_defconfig: Enable Broadcom AHCI
ARM: multi_v7_defconfig: Enable BRCMSTB networking
ARM: multi_v7_defconfig: Enable BCM63xx
Signed-off-by: Olof Johansson <olof@lixom.net>
We have everything we need in multi_v7_defconfig that exists in
bcm_defconfig, so get rid of that file to reduce the maintenance burden.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In order to get rid of bcm_defconfig, enable this driver which is needed
by some Broadcom SoCs based on the Kona architecture to reboot.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The BCM7038 watchdog is used by all Broadcom STB SoCs but is not needed
for system reboot, we just turn it on as a module.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable the Broadcom AHCI driver and its companion PHY driver to get
functional SATA3 support.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
At some boards, it has no ethernet support. As an alternative, we can use
USB Ethernet card to support NFS (u-boot supports it too). It supports
AXIS cards which are used most frequently.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the following bits:
CONFIG_TOUCHSCREEN_STMPE
- STMPE touchscreen support, needed on MCVEVK as it contains the
chip. This also enables the STMPE MFD device and touchscreen
input support.
CONFIG_USB_STORAGE
- USB storage support is often used, so enable it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Newer Keystone 2 devices utilize pinmuxing. Enable PINCTRL SINGLE
which is used to handle pinmuxing.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
The Exynos SoC provides a Security SubSystem block for accelerating some
cryptographic operations. Enable the driver for it - s5p-secss to
utilize the hardware acceleration.
Currently the s5p-secss driver supports AES in CBC and ECB modes.
However its usefulness could be doubted. Excerpt of tests on Odroid XU3
(Exynos5422), for 256 bit key, encryption, performance CPU freq governor:
algorithm | block size [b] | average speed [MB/s] |
cbc-aes-s5p | 16 | 11.5 |
cbc-aes-s5p | 64 | 25.4 |
cbc-aes-s5p | 256 | 41.0 |
cbc-aes-s5p | 1024 | 47.4 |
cbc-aes-s5p | 8192 | 49.0 |
cbc(aes-generic) | 16 | 0.4 |
cbc(aes-generic) | 64 | 1.8 |
cbc(aes-generic) | 256 | 6.6 |
cbc(aes-generic) | 1024 | 25.2 |
cbc(aes-generic) | 8192 | 83.1 |
Anyway enable the driver so it will get some testing coverage by
community.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
The Exynos4412-based Trats2 board has CM36651 proximity/ambient light
sensor, MMS114 touchscreen and Wolfson Microelectronics WM1811 CODEC.
Enable them in defconfig to get some testing coverage and use its
features.
While saving defconfig the SND_SOC_ODROIDX2 is removed because it does
not exist since commit ee12a817bb ("ASoC: samsung: Remove unused
Odroid x2/u3 machine driver").
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
1. Fix samsung-keypad build error if INPUT is selected as module.
The error though depends on some uncommon build settings so it
is not as easy to trigger.
2. Get rid of 'samsung_device_dma_mask' defined but not used warning.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=LR9t
-----END PGP SIGNATURE-----
Merge tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes
Two fixes for v4.7 cycle for build issues:
1. Fix samsung-keypad build error if INPUT is selected as module.
The error though depends on some uncommon build settings so it
is not as easy to trigger.
2. Get rid of 'samsung_device_dma_mask' defined but not used warning.
* tag 'samsung-fixes-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: exynos: don't select keyboard driver
ARM: samsung: improve static dma_mask definition
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the required drivers and subsystems to bring-up networking on
Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both
have proper dependencies on their internal PHY and MDIO drivers.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Enable ARCH_BCM_63XX to build ARM-specific boot and SMP code, as well as
the serial console driver for this platform.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The driver can be built as a module, so use this possibility.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that
can be used to {en,de}code video streams by hardware. Enable support for
its driver as a module so the MFC can be tested.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Exynos SoCs have a Multi Format Video Hardware Codec (MFC) IP block that
can be used to {en,de}code video streams by hardware. Enable support for
its driver as a module so the MFC can be tested.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
There are a bunch of media platform drivers under drivers/media/platform/
for Samsung SoCs that are enabled in exynos_defconfig but no in multi_v7.
This patch enables them as a module to improve build coverage for these
drivers and also to allow people use them with proper hardware if modules
are installed.
Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
There are a bunch of media platform drivers under drivers/media/platform/
that are for Samsung SoCs but are not being built with exynos_defconfig.
This patch enables them as a module to improve build coverage for these
drivers and also to allow people use them with proper hardware if modules
are installed. The S5P MFC driver wasn't enabled since it fails to probe.
Only the boolean Kconfig symbols are enabled as built-in, since drivers
are not critical and also to keep the kernel binary image size as small
as possible.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Mixer driver is selected by CONFIG_DRM_EXYNOS_HDMI option. Since Exynos5433
HDMI does not require Mixer and there are separate options to select Mixer
and HDMI.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Enable the new DRM driver in the sunxi default configuration
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Enable the new DRM driver in the multi_v7 defconfig
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Disable big.LITTLE switcher in order to allow automatic usage of
cpufreq-dt driver on Exynos542x/Exynos5800 SoCs based boards.
This change should not cause any problems as arm_big_little[_dt]
driver (which is using big.LITTLE switcher support to do the "real"
big.LITTLE switching work) is not used on any Exynos SoC based
board currently.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
This option was replaced by PAGE_COUNTER which is selected by MEMCG.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As usual, a bunch of commits, mostly adding drivers and other options to
defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol
that got renamed.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ecJp
-----END PGP SIGNATURE-----
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"As usual, a bunch of commits, mostly adding drivers and other options
to defconfigs.
We are adding three new defconfig files for the newly added 32-bit
machines (aspeed and mps2), the rest is mainly housekeeping.
The changes outside of arch/arm/config/ are for a Kconfig symbol that
got renamed"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits)
ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME
ARM: u8500_defconfig: update sensor config
ARM: u8500_defconfig: remove staging from defconfig
ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT
ARM: at91/defconfig: sama5: add CONFIG_FHANDLE
arm/configs: Add Aspeed defconfig
arm/configs/multi_v5: Add Aspeed ast2400
ARM: at91: sama5: Update defconfig
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
ARM: multi_v7: Enable Tegra XUSB controller in defconfig
ARM: tegra: Enable XUSB controller in defconfig
ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver
ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC
ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver
ARM: multi_v7_defconfig: add Atmel watchdog timers
ARM: multi_v7_defconfig: add HLCDC drivers as modules
ARM: at91/defconfig: add PDMIC driver to sama5_defconfig
ARM: at91/defconfig: add HLCDC driver to sama5_defconfig
...
The samsung-keypad driver is implicitly selected by ARCH_EXYNOS4 (why?),
but this fails if CONFIG_INPUT is a loadable module:
drivers/input/built-in.o: In function `samsung_keypad_remove':
drivers/input/keyboard/samsung-keypad.c:461: undefined reference to `input_unregister_device'
drivers/input/built-in.o: In function `samsung_keypad_irq':
drivers/input/keyboard/samsung-keypad.c:137: undefined reference to `input_event'
drivers/input/built-in.o: In function `samsung_keypad_irq':
include/linux/input.h:389: undefined reference to `input_event'
drivers/input/built-in.o: In function `samsung_keypad_probe':
drivers/input/keyboard/samsung-keypad.c:358: undefined reference to `devm_input_allocate_device'
drivers/input/built-in.o:(.debug_addr+0x34): undefined reference to `input_set_capability'
This removes the 'select' as suggested by Krzysztof Kozlowski and
instead enables the driver from the defconfig files.
The problem does not happen on mainline kernels, as we don't normally
build built-in input drivers when CONFIG_INPUT=m, but I am experimenting
with a patch to change this, and the samsung keypad driver showed up
as one example that was silently broken before.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.org/lkml/2016/2/14/55
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Commit 94ea9c7a579f ("lib, switch CONFIG_PRINTK_TIME to int") changes
the type of CONFIG_PRINTK_TIME and adapts all existing defconfig files,
while we add two new defconfig files with d0bc3483da ("arm/configs:
Add Aspeed defconfig"), with the old type.
This changes the two new defconfig files to match the other ones.
As a result, we get harmless warnings for the arm-soc defconfig
branch by itself, but everything will work when 4.7-rc1 is out.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tb2f
-----END PGP SIGNATURE-----
Merge tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux into next/defconfig
Merge "aspeed defconfig for 4.7" from Joel Stanley:
This adds configurations used for testing Aspeed BMC SoCs, as well as adding
the v5 part to the multi defconfig.
* tag 'aspeed-for-4.7-defconfig' of https://github.com/shenki/linux:
arm/configs: Add Aspeed defconfig
arm/configs/multi_v5: Add Aspeed ast2400
The Ux500 is using buffered IIO as the sensors support
IRQs. The BH1780 ambient light sensor was added to IIO,
so disable the old misc driver and activate the driver
in IIO.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Ux500 was enabling the staging drivers due to the RMI4
touchscreen driver, this is now properly upstream, so drop
this and the dead symbol for the old RMI4 hack from
the defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Merge "i.MX defconfig updates for 4.7" from Shawn Guo:
- Update multi_v5_defconfig for i.MX21/27 and systemd support
- Update imx_v6_v7_defconfig to support devices found on various i.MX6
board: FT5x06 and TSC2004 touch, I2C GPIO, MICREL PHY and M41T80 RTC
* tag 'imx-defconfig-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO
ARM: multi_v5_defconfig: Enable recommended options for systemd
ARM: multi_v5_defconfig: Enable support for MX21/MX27
ARM: imx_v6_v7_defconfig: add CONFIG_RTC_DRV_M41T80
ARM: imx_v6_v7_defconfig: add CONFIG_I2C_MUX_GPIO
ARM: imx_v6_v7_defconfig: add FT5x06 and TSC2004 touch support
Merge "ARM: tegra: Default configuration updates for v4.7-rc1" from Thierry Reding:
Enable the XUSB pad controller and XUSB controller drivers on the Tegra
and multi-v7 default configurations.
* tag 'tegra-for-4.7-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: multi_v7: Enable Tegra XUSB controller in defconfig
ARM: tegra: Enable XUSB controller in defconfig
based filesystems, SPI NOR and GPIO sysfs
entries.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=ocYZ
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Merge "DaVinci defconfig updates for v4.7" from Sekhar Nori:
Some defconfig updates to support systemd
based filesystems, SPI NOR and GPIO sysfs
entries.
* tag 'davinci-for-v4.7/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: enable SPI and NOR as modules
ARM: davinci_all_defconfig: support systemd
ARM: davinci_all_defconfig: enable GPIO_SYSFS
CONFIG_FHANDLE is listed as a mandatory kernel option for systemd. So
explicitly enable it to allow easy use of systemd userspace.
Reported-by: Marek Vasut <marex@denx.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Now that all drivers support the same set of functions and the same
setup code, drop every model-specific DSA switch driver and replace them
with a common mv88e6xxx driver.
This merges the info tables into one, removes the function exports, the
model-specific files, and update the defconfigs.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the Aspeed ast2400 BMC SoC to the build.
The SoC has six UARTs so we need to enable the appropriate options for
SERIAL_8250
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable CGROUPS support, so we can boot userspace that uses systemd on
top of kernel configured using this defconfig. The systemd userspace
depends on cgroups and without them, it dies in mysterious ways.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
The driver for Micrel PHYs is required for the Apalis iMX6 module
plugged into a Ixora carrier board featuring an on-module Micrel
KSZ9031 Gigabit PHY.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GPIO-based bitbanging I2C driver is required to make HDMI work on
the Apalis iMX6 module plugged into a Ixora carrier board featuring a
DDC channel to read a screen's EDID being hooked up to regular GPIOs.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the multi_v7 default configuration.
The XUSB pad controller is built-in because it is needed by PCIe, which
in turn provides the onboard ethernet used for network boot on a Jetson
TK1.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable the XUSB pad controller and XUSB controller (implementing an XHCI
interface) in the Tegra default configuration.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Mostly enable drivers used on various boards as loadable modules
where possible. Also one warning fix related to RXKAD changes
heading to v4.7. And run make save_defconfig to shrink down the
size a bit.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=lX8d
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Merge "Defconfig changes for omap2plus_defconfig for v4.7 merge window" from Tony Lindgren:
Mostly enable drivers used on various boards as loadable modules
where possible. Also one warning fix related to RXKAD changes
heading to v4.7. And run make save_defconfig to shrink down the
size a bit.
* tag 'omap-for-v4.7/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules
ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable module
ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value
ARM: omap2plus_defconfig: Update with make savedefconfig
ARM: omap2plus_defconfig: Enable MDIO Bus/PHY emulation support
ARM: omap2plus_defconfig: Enable DP83867 support
ARM: omap2plus_defconfig: Enable GPIO_TPIC2810
This includes savedefconfig update of lpc32xx_defconfig, which removes
a number of outdated config options, plus ARM PrimeCell PL17x memory
controller driver is enabled by default now, on LPC32xx boards the
controller is commonly used to access SDRAM and NOR.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=yp6h
-----END PGP SIGNATURE-----
Merge tag 'lpc32xx-defconfig-4.7' of git://github.com/vzapolskiy/linux-lpc32xx into next/defconfig
Merge "NXP LPC32xx defconfig updates for v4.7" from Vladimir Zapolskiy:
This includes savedefconfig update of lpc32xx_defconfig, which removes
a number of outdated config options, plus ARM PrimeCell PL17x memory
controller driver is enabled by default now, on LPC32xx boards the
controller is commonly used to access SDRAM and NOR.
* tag 'lpc32xx-defconfig-4.7' of git://github.com/vzapolskiy/linux-lpc32xx:
ARM: LPC32xx: add PL175 memory controller driver to defconfig
ARM: LPC32xx: defconfig update
Add the Atmel Pulse Density Modulation Interface Controller (PDMIC) driver
as a module. It's used by sama5d2 SoC for instance.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Add both Atmel watchdog timers to the multi_v7_defconfig. They are added
as part of the kernel because it's a core piece of the system.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Add the HLCDC drivers to multi_v7_defconfig.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Add Pulse Density Modulation Interface Controller (PDMIC) driver compilation
for sama5 default configuration. Is used by sama5d2 SoC for instance.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Add the LCD DRM driver with all its dependencies:
- the MFD driver
- the backlight PWM
- the simple panel driver
Remove the CONFIG_FB as it is not needed on any sama5 device.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Selection of the HDMAC option is now needed to allow some sama5 devices
to have the DMA driver compiled and available.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Commit 648af7fca1 ("rxrpc: Absorb the rxkad security module") changed
the RXKAD Kconfig symbol from tristate to boolean but the commit didn't
update the omap2plus_defconfig that was enabling CONFIG_RXKAD as module.
This leads to the following warning when using the omap2plus_defconfig:
arch/arm/configs/omap2plus_defconfig:112:warning: symbol value 'm' invalid for RXKAD
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
* Remove Gen2 designation from Kconfig for R-Car PCIE driver
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HTRw
-----END PGP SIGNATURE-----
Merge tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Merge "Renesas ARM Based SoC Pci Defconfig Updates for v4.7" from Simon Horman:
* Remove Gen2 designation from Kconfig for R-Car PCIE driver
* tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
PCI: rcar-pcie: Remove Gen2 designation from Kconfig
This patch adds a new config for MPS2 platform.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
- Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S,
switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller
- Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root
Power Management support, switching sdhci-bcm2835 for sdhci-iproc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QxkI
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.7/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
Merge "This pull request contains defconfig changes for Broadcom ARM-based SoCs"
from Florian Fainelli:
- Eric enables more BCM2835 peripherals in multi_v7_defconfig: watchdog, I2S,
switches from the sdhci-bcm2835 to the sdhci-iproc driver, DWC2 USB controller
- Eric also enables more BCM2835 peripherals in bcm2835_defconfig: VC4, NFS root
Power Management support, switching sdhci-bcm2835 for sdhci-iproc
* tag 'arm-soc/for-4.7/defconfig' of http://github.com/Broadcom/stblinux:
ARM: bcm2835: Enable NFS root support.
ARM: bcm2835: Enable the VC4 graphics driver in the defconfig
ARM: bcm2835: Enable CONFIG_PM.
ARM: bcm2835: Switch BCM2835 to sdhci-iproc.c for MMC
ARM: multi_v7_defconfig: Build in DWC2 USB support
ARM: multi_v7_defconfig: Switch BCM2835 to sdhci-iproc.c for MMC
ARM: multi_v7_defconfig: Add more BCM2835 support
- Use the new cryto engine(mv_cesa) in the mvebu and multi-arm
defcongig files
- Attach mvebu_*_defconfig to the mvebu maintainers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlcPzQsACgkQCwYYjhRyO9UpUwCghNZsWe0jSWCZyVbmLS4qCGT/
X3oAn1wc1CeLHFDroMVcCw3aBaTLofUP
=LxX6
-----END PGP SIGNATURE-----
Merge tag 'mvebu-defconfig-4.7-1' of git://git.infradead.org/linux-mvebu into next/defconfig
Merge "mvebu defconfig for 4.7 (part 1)" from Gregory CLEMENT
- Use the new cryto engine(mv_cesa) in the mvebu and multi-arm
defcongig files
- Attach mvebu_*_defconfig to the mvebu maintainers
* tag 'mvebu-defconfig-4.7-1' of git://git.infradead.org/linux-mvebu:
ARM: mvebu_v5_defconfig: Switching to the new Marvell's cryptographic engine driver
ARM: multi_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
MAINTAINERS: attach arch/arm/configs/mvebu_*_defconfig to relevant maintainers
ARM: mvebu_v7_defconfig: Enabling the new Marvell's cryptographic engine driver
This NAND controller device is used on UniPhier SoCs (and I know
it is also used on SoC FPGA).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Enable SPI driver and SPI NOR flash support as modules.
Tested with SPI NOR flash on DA850-EVM. Basic boot test only to confirm
NOR flash device detection.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
CONFIG_FHANDLE is required by systemd[1], which is the
default init system in more and more distributions.
So lets enable it for DaVinci platforms as well.
While at it, remove stale entry CONFIG_INOTIFY=y
[1] https://github.com/systemd/systemd/blob/master/README#L37
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
It appears that Gen2 is a misnomer for the R-Car PCIE driver
which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2
from the help text and Kconfig symbol.
Also, re-arange the Kconfig symbol name to use PCIE as the prefix.
This appears to be in keeping with other PCIE Kconfig symbols.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
The change enables build of ARM PrimeCell PL17x driver for LPC32xx
platform, the memory controller is commonly used to interface NOR
flash drives.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
The change is a result of "make lpc32xx_defconfig; make savedefconfig"
run, a number of config options are removed:
CONFIG_BINFMT_AOUT=y -- not needed, legacy
CONFIG_FPE_NWFPE=y -- not needed, AEABI build
CONFIG_IPV6_PRIVACY=y -- removed build option
CONFIG_IPV6=y -- selected by default
CONFIG_MII=y -- not needed, board phys don't select library
CONFIG_MTD_CHAR=y -- removed build option
CONFIG_MTD_M25P80=y -- not needed, AT25 EEPROM driver is in use
CONFIG_USB_PHY=y -- selected by default
Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
This enables the new driver for Marvell CESA crypto engines on all mvebu v5.
The old driver is no longer used, but it is still in the tree for fallback.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This enables the new driver for Marvell CESA crypto engines on all ARMv7.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This enables the new driver for Marvell CESA crypto engines on all mvebu v7.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-----------
- Enable ST's HW Random number generator in multi_v7 defconfig
- Enable PWM regulator support in multi_v7 defconfig
- Enable ST's Power and Reset driver in multi_v7 defconfig
- Enable ST's PWM in multi_v7 defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OJtH
-----END PGP SIGNATURE-----
Merge tag 'sti-defconfig-for-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/defconfig
Highlights:
-----------
- Enable ST's HW Random number generator in multi_v7 defconfig
- Enable PWM regulator support in multi_v7 defconfig
- Enable ST's Power and Reset driver in multi_v7 defconfig
- Enable ST's PWM in multi_v7 defconfig
* tag 'sti-defconfig-for-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti:
ARM: multi_v7_defconfig: Enable ST's HW Random Number Generator
ARM: multi_v7_defconfig: Enable support for PWM Regulators
ARM: multi_v7_defconfig: Enable ST's Power Reset driver
ARM: multi_v7_defconfig: Enable ST's PWM driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Three types of display controller-drivers where added recently. The
Analogix Displayport variant and Designware MIPI DSI used for example
on the rk3288 as well as the Innosilicon HDMI controller used on the
rk3036.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
The displayport phy controls the output of the Analogix displayport
controller on Rockchip SoCs and is therefore one component to enable
veyron devices to use their internal display.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
MDIO Bus/PHY emulation with fixed speed/link PHYs will be used in
Baltos iR5221 devices to connect to ICPlus IP175D switch IC.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable DP83867 Ethernet phy for supporting networking on DRA72-EVM rev C
(SR2.0).
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Enable the TI TPIC2810 8-Bit LED Driver with I2C Interface. This is used
in AM335x ICEv2 Boards.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add the config options needed to get CPU hotplug functional.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
Enable FHANDLE, CGROUPS, BLK_DEV_BSG and DEVTMPFS as recommended by
systemd (which also matches the multi_v7 defconfig). Also enable IPV6,
which defaults to 'y' by now.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Roger Quadros