Commit Graph

6 Commits

Author SHA1 Message Date
Steven Rostedt (VMware) ed65df63a3 tracing: Have all levels of checks prevent recursion
While writing an email explaining the "bit = 0" logic for a discussion on
making ftrace_test_recursion_trylock() disable preemption, I discovered a
path that makes the "not do the logic if bit is zero" unsafe.

The recursion logic is done in hot paths like the function tracer. Thus,
any code executed causes noticeable overhead. Thus, tricks are done to try
to limit the amount of code executed. This included the recursion testing
logic.

Having recursion testing is important, as there are many paths that can
end up in an infinite recursion cycle when tracing every function in the
kernel. Thus protection is needed to prevent that from happening.

Because it is OK to recurse due to different running context levels (e.g.
an interrupt preempts a trace, and then a trace occurs in the interrupt
handler), a set of bits are used to know which context one is in (normal,
softirq, irq and NMI). If a recursion occurs in the same level, it is
prevented*.

Then there are infrastructure levels of recursion as well. When more than
one callback is attached to the same function to trace, it calls a loop
function to iterate over all the callbacks. Both the callbacks and the
loop function have recursion protection. The callbacks use the
"ftrace_test_recursion_trylock()" which has a "function" set of context
bits to test, and the loop function calls the internal
trace_test_and_set_recursion() directly, with an "internal" set of bits.

If an architecture does not implement all the features supported by ftrace
then the callbacks are never called directly, and the loop function is
called instead, which will implement the features of ftrace.

Since both the loop function and the callbacks do recursion protection, it
was seemed unnecessary to do it in both locations. Thus, a trick was made
to have the internal set of recursion bits at a more significant bit
location than the function bits. Then, if any of the higher bits were set,
the logic of the function bits could be skipped, as any new recursion
would first have to go through the loop function.

This is true for architectures that do not support all the ftrace
features, because all functions being traced must first go through the
loop function before going to the callbacks. But this is not true for
architectures that support all the ftrace features. That's because the
loop function could be called due to two callbacks attached to the same
function, but then a recursion function inside the callback could be
called that does not share any other callback, and it will be called
directly.

i.e.

 traced_function_1: [ more than one callback tracing it ]
   call loop_func

 loop_func:
   trace_recursion set internal bit
   call callback

 callback:
   trace_recursion [ skipped because internal bit is set, return 0 ]
   call traced_function_2

 traced_function_2: [ only traced by above callback ]
   call callback

 callback:
   trace_recursion [ skipped because internal bit is set, return 0 ]
   call traced_function_2

 [ wash, rinse, repeat, BOOM! out of shampoo! ]

Thus, the "bit == 0 skip" trick is not safe, unless the loop function is
call for all functions.

Since we want to encourage architectures to implement all ftrace features,
having them slow down due to this extra logic may encourage the
maintainers to update to the latest ftrace features. And because this
logic is only safe for them, remove it completely.

 [*] There is on layer of recursion that is allowed, and that is to allow
     for the transition between interrupt context (normal -> softirq ->
     irq -> NMI), because a trace may occur before the context update is
     visible to the trace recursion logic.

Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/
Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
Cc: =?utf-8?b?546L6LSH?= <yun.wang@linux.alibaba.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Fixes: edc15cafcb ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-10-18 18:12:09 -04:00
Steven Rostedt (VMware) 7b68621f8d ftrace: Clean up the recursion code a bit
In trace_test_and_set_recursion(), current->trace_recursion is placed into a
variable, and that variable should be used for the processing, as there's no
reason to dereference current multiple times.

On trace_clear_recursion(), current->trace_recursion is modified and there's
no reason to copy it over to a variable.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-10 20:39:40 -05:00
Steven Rostedt (VMware) 773c167050 ftrace: Add recording of functions that caused recursion
This adds CONFIG_FTRACE_RECORD_RECURSION that will record to a file
"recursed_functions" all the functions that caused recursion while a
callback to the function tracer was running.

Link: https://lkml.kernel.org/r/20201106023548.102375687@goodmis.org

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Guo Ren <guoren@kernel.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-csky@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: live-patching@vger.kernel.org
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06 08:42:26 -05:00
Steven Rostedt (VMware) da5afbeb17 ftrace: Optimize testing what context current is in
The preempt_count() is not a simple location in memory, it could be part of
per_cpu code or more. Each access to preempt_count(), or one of its accessor
functions (like in_interrupt()) takes several cycles. By reading
preempt_count() once, and then doing tests to find the context against the
value return is slightly faster than using in_nmi() and in_interrupt().

Link: https://lkml.kernel.org/r/20201028115612.780796355@goodmis.org
Link: https://lkml.kernel.org/r/20201106023546.558881845@goodmis.org

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06 08:33:23 -05:00
Steven Rostedt (VMware) 6e4eb9cb22 ftrace: Add ftrace_test_recursion_trylock() helper function
To make it easier for ftrace callbacks to have recursion protection, provide
a ftrace_test_recursion_trylock() and ftrace_test_recursion_unlock() helper
that tests for recursion.

Link: https://lkml.kernel.org/r/20201028115612.634927593@goodmis.org
Link: https://lkml.kernel.org/r/20201106023546.378584067@goodmis.org

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06 08:33:23 -05:00
Steven Rostedt (VMware) 0264c8c9e1 ftrace: Move the recursion testing into global headers
Currently, if a callback is registered to a ftrace function and its
ftrace_ops does not have the RECURSION flag set, it is encapsulated in a
helper function that does the recursion for it.

Really, all the callbacks should have their own recursion protection for
performance reasons. But they should not all implement their own. Move the
recursion helpers to global headers, so that all callbacks can use them.

Link: https://lkml.kernel.org/r/20201028115612.460535535@goodmis.org
Link: https://lkml.kernel.org/r/20201106023546.166456258@goodmis.org

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-11-06 08:33:23 -05:00