We shouldn't set voltages below the min or above the max voltage the gpu is
able to set, so save the range for future lookups.
Signed-off-by: Karol Herbst <karolherbst@gmail.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This patch adds support for advanced features supported by the
Noise-Aware PLL of Maxwell. Glitchless switch allows the PL field to be
updated without disabling the PLL first if the SYNC_MODE bit of the CFG
register is set.
More significantly, DFS allows the PLL to monitor the actual input
voltage and to dynamically lower the output frequency accordingly. This
allows the clock to be more tolerant of lower voltages.
These improvements are only supported for Tegra speedos >= 1.
Also add the voltage table that is suitable for GM20B's NAPLL. This
change needs to be done atomically for the right voltages to be used by
the clock driver.
v2. Fix build on non-Tegra platforms
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Strip the _ prefix off the gk20a clock constructor.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Split the MNP programming function into two functions for the cases
where we allow sliding or not, instead of making it take a parameter for
this. This results in less conditionals in the code and makes it easier
to read.
Also make the MNP programming functions take the PLL parameters as
arguments, and move bits of code to more relevant places (previous
programming tended to be just-in-time, which added more conditionnals in
the code).
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Use a dedicated function instead of always calculating n_lo on the fly.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Make functions manipulating PLL settings take them as an argument,
instead of assuming we want to work on the copy in the gk20a_clk
structure. This makes these functions more flexible, which we will need
in GM20B.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Add relevant functions to work with the gk20a_pll structure and use them
where they ought to be instead of directly manipulating registers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Move variables declarations to their actual scope of use, and simplify
code a bit.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Slide setup needs to be performed only once, during init. Also
use the proper parameters for different clock speeds.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Chips may be characterized for a minimum voltage. Support this extra
parameter and select the appropriate minimum voltage for the detected
GPU speedo.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Strip the _ prefix off the gk20a volt constructor.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Give a name to this constant so we at least get an idea of what it is
for.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Nobody else is using these, so make them private.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The GPU speedo ID is required to select the right clk/volt parameters on
GM20B.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
There are cases where subdevs need to perform additonal actions around
the master reset, so we want to expost the operations separately.
This commit also adds a flag to the NV_PMC_ENABLE bitfield definitions
which allow skipping the automatic reset() called from core/subdev.c.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We've got a complaint saying that the description was quite obtuse and
indeed it was. This patch tries to improve it.
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Add Gustavo as maintainer for the Sync File Framework. Sumit is
co-maintainer as he maintains drivers/dma-buf/. It also uses Sumit's
tree as base.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
This patch adds support for ARM 64bit architecture with IOMMU-DMA glue
code, so Exynos DRM can be now used on Exynos 5433 with IOMMU enabled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch moves all ARM 32bit DMA-mapping/IOMMU dependant code from
exynos_drm_iommu.c to .h, to let it compile conditionally and prepare
for adding support for other architectures/IOMMU glue code (like ARM
64bit with IOMMU-DMA glue). Later, when ARM 32bit and 64bit will be
unified, this code can be removed.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch removes unused entries from exynos_drm_private strcuture.
da_start/da_space_size were only used in drm_create_iommu_mapping()
function and never set to other value than the defaults. Instead use
default values directly in arm_iommu_create_mapping() call.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds a check if all devices belonging to Exynos DRM have the
same dma_map_ops set. This is required to enable operation with IOMMU
enabled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Move code for managing DMA max segment size parameter to separate
functions. This patch also replaces devm_kzalloc() with kzalloc() and
adds proper kfree call. devm_kzalloc() cannot be used for dma_params
structure, because it will be freed on driver remove not on device
release. This means in case of Exynos DRM being compiled as module and
loaded 2 times, a user-after-free issue will happen.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This was somehow lost between v3 and the merged version in Maarten's
patch merged as:
commit f2d580b9a8
Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Date: Wed May 4 14:38:26 2016 +0200
drm/core: Do not preserve framebuffer on rmfb, v4.
Actual code copied from Maarten's patch, but with the slight change to
just use dev->mode_config.funcs->atomic_commit to decide whether to
use the atomic path or not.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-24-git-send-email-daniel.vetter@ffwll.ch
of_get_drm_display_mode() may fail. Check its return code and bail out
on error.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
If imx-drm is combined with a bridge or panel that requests an
unsupported format, warn and use a default mapping instead of
hanging the machine. The worst that can happen here are wrong
colors.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The error message should say "hsync" instead of "vsync" as
we have just checked the "fsl,hsync-pin" property.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There is no need for doing an extra 'or' operation when reading
the return value from of_property_read_u32().
Just do a simple read instead.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
regulator_set_voltage() may fail, so we better check its return value
and propagate it in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Check the return code on panel attach. Avoids a kernel crash later
on if the attach failed.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The internal bus configuration is imx-drm specific crtc state. Store it
in imx_crtc_state and let the encoder atomic_check callbacks determine
bus_flags, bus_format and the sync pins, possibly taking into account
the mode and the connector display info.
The custom imx_drm_encoder structure can be replaced again with
drm_encoder.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
With all the beforehand phases and steps done, we can adverstise DRIVER_ATOMIC.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Now that we can use atomic configurations, all the legacy callbacks
of CRTCs, encoders and connectors can be switched to the atomic version.
For the imx-ldb driver, there is a clock parent setting mismatch bewteen
->enable and ->disable after the switch, so a fixup is added. For the
imx-tve driver, since the encoder's callback ->dpms is replaced by
->disable, we need to move the setting for the IPU_CLK_EN bit(in register
TVE_COM_CONF_REG) from ->enable/->disable to ->mode_set, otherwise, the
relevant CRTC cannot be disabled correctly with a warning on DC stop timeout.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There is no one using the legacy drm_connector_funcs structure since
the imx-drm has been converted to atomic, so we may remove it.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Replacing drm_crtc_helper_set_config() by drm_atomic_helper_set_config()
and converting the suspend/resume operations to atomic make us be able
to use atomic configurations. All of these allow us to remove the
crtc_funcs->mode_set callback as it is no longer used. Also, change
the plane_funcs->update/disable_plane callbacks from the transitional
version to the atomic version. Furthermore, switching to the pure atomic
version of set_config callback means that we may implement CRTC/plane
atomic checks by using the new CRTC/plane states instead of the legacy
ones and we may remove the private ipu_crtc->enabled state which was left
there for the transitional atomic helpers in phase 1. Page flip is also
switched to the atomic version. Last, the legacy function
drm_helper_disable_unused_functions() is removed from ->load in order
not to confuse the atomic driver.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Karol Herbst