This CL is in support of another CL c/2048848, topic
'Refactor hid command in /frameworks/base/cmds' in
internal master. Adding the permissions for
shell here to access uhid_node as part of the
new 'uhid' group.
Bug: 34052337
Test: Tested on angler, bluetooth mouse works OK.
Change-Id: If9e100aa1262d689fb8adc5c0ce93f157c96399e
For legacy reason, /data/data is a real dir and /data/user/0 is a
symbolic link to it. Overhead for linux kernel to walk through
symbolic link is not negligible. This is unnessary overhead to
carry over. This patch is to make /data/user/0 a a real dir and
make legacy folder /data/data a symbolic link. OTAed system does
not get impacted.
Test: Manual test
Change-Id: I419564a75f6ebf3154badb8725ba9831164592b6
Signed-off-by: cjbao <cathy.bao@intel.com>
This trigger resets ffs.ready in situations where
adbd is stopped via commandline.
Test: stop adbd
Change-Id: Ib5028d55c4883a8291d6de2dbcb0641ff8eb7a48
This allows devices to use functionfs for mtp and ptp instead
of the ordinary functions. The property is set regardless of
which function is enabled so mtp and ptp functions will continue
to work.
Bug: 33220530
Test: use mtp with ffs and non ffs devices
Change-Id: I4527e153bd10ef1e262e487482ae455835d1c698
Currently zygote is started early for FBE device but update_verifier is run later
which creates a potential risk. This CL ensures update_verifier run before
zygote touches anything within data/ partition. With this change, we also start zygote
early for unencrypted/unsupported encryption state device.
Bug: 37543411
Test: marlin boots
Change-Id: I95daa73bc1a503eecb70d7be78251b74b773abf8
- late start of zygote_secondary leads into occasional
1 second wait for starting system service.
- Early start secondary zygote so that there is no additional
wait.
bug: 37508384
Test: python packages/services/Car/tools/bootanalyze/bootanalyze.py -r -c packages/services/Car/tools/bootanalyze/config.yaml -n 100 -f -e 16 -w 30
Change-Id: I2e4eb0b59a9a8417b56a72fe2de6fa2a6e1ab0a2
ro.logd.kernel, ro.config.low_ram, ro.logd.timestamp and ro.debuggable
need to be retrieved prior to logd start in order for the service to
behave in a configured manner. Other essential services are also
dependent on these system properties as well, so it just makes sense
to pick them all up first in 'on fs'.
Test: smoke test
Bug: 37425809
Change-Id: I33ad185f397ee527ed3c84cc2bcb40ff8ca785b5
Currently if a process sets the sys.powerctl property, init adds this
property change into the event queue, just like any other property.
The actual logic to shutdown the device is not executed until init
gets to the action associated with the property change.
This is bad for multiple reasons, but explicitly causes deadlock in
the follow scenario:
A service is started with `exec` or `exec_start`
The same service sets sys.powerctl indicating to the system to
shutdown
The same service then waits infinitely
In this case, init doesn't process any further commands until the exec
service completes, including the command to reboot the device.
This change causes init to immediately handle sys.powerctl and reboot
the device regardless of the state of the event queue, wait for exec,
or wait for property conditions.
Bug: 37209359
Bug: 37415192
Test: Init reboots normally
Test: Update verifier can reboot the system
Change-Id: Iff2295aed970840f47e56c4bacc93001b791fa35
Starting zygote early requires cpuset to be initialized to all cores for
foreground cpuset. Change to expolit all cores by default at boot and
let device manufacturers override to proper values in device specific
init script.
Bug: 36576280
Test: marlin boot fast and checked cpuset during early boot
Change-Id: I2c1ce0630e58a7b04d1a453c6740d3f0bce9de9f
* changes:
ueventd: Fix up string handling in handle_*_device_event()
ueventd: convert mkdir_recursive() to std::string
ueventd: move subsystem logic from code to ueventd.rc
This CL disables module loading by writing 1 to
/proc/sys/kernel/modules_disabled when the property sys.boot_completed
is set to 1 by ActivityManagerService (at the broadcast of
PHASE_BOOT_COMPLETED).
Bug: 36515654
Test: tested on sailfish and verified that module loading is disabled in
userdebug and enabled in eng mode
Merged-In: Id38d34a6395966ab21e440614337c0cfca791ad0
(cherry picked from commit 6ed19d1675)
Change-Id: I2faa459b450b3a64f854c832c6b91cbf682bbffa
This was marked deprecated in 2014 and removed in 2015, let's remove
the uevent rule now too.
Test: see that logging still works on bullhead
Change-Id: Idaf3f49a1afe7046eba6c976628b9f1c8b3ec094
The class early_hal is essentially for the keymaster hal which needs
to be up before vold tries to unlock a storage encryption key (FDE or
FBE). The current position is too early in the boot process, because
on devices with legacy HAL the wrapper service uses system properties
to find the legacy HAL.
This patch moves the start of the early_hal class to the late-fs trigger
action which runs right after the system property action.
Test: Manually tested and update tested on bullhead, sailfish, and
another device.
Bug: 35764921
Change-Id: I34b45b85f8450e9ef18861535fdb2ee963df8c9b
(cherry picked from commit 1ad8d21947)
This class is used to start hals which are required in order to mount
data (for instance keymaster).
Test: works to start early_hal in internal
Bug: 36278706
Change-Id: If06908135e59b187683d8cf4cc4a00b490559081
This reverts commit 5011270225.
Now starting even earlier.
Reason for revert: Needed change, reverted b/c broken device.
Bug: 36278706
Test: original DOA device boots
Test: angler, bullhead, fugu, marlin, ryu
Test: all these devices boot with wipe
Test: all these devices boot with w/o wipe
Test: lshal shows all included services
Change-Id: Ic639aedf7834b1bd3a26d23d109727f5559317e9
Vendor owns /data/vendor.
HAL data must go in /data/vendor/hardware/.
Bug: 34980020
Test: build and boot AOSP Marlin. Observe /data/vendor and
/data/vendor/hardware exist and are empty.
Change-Id: I6fe96e3c76a10a5eb480ba10e10d4d006de56c12
Also start hals where hwservicemanager was started before.
Bug: 36278706
Test: internal marlin+angler boots
Change-Id: Ia55d2ef747fcbd086a09e1bb856824b14343118b
We have seen cases when threads in this cgroup not scheduled for more than
a few seconds in heavy workload situation and causing device freeze.
In Linux, multiple threads placed in ROOT cgroup cause the CPU resource to
be split per thread, rather than per group.
Currently we have many threads in ROOT cgroup, which makes threads in
bg_non_interactive cgroup to have "tiny" CPU resource other than 5%
quota defined.
Bug: 34193533
Test: on marlin
Change-Id: I7721f6196560fbedf6265e8b6db130cec9edefd7
This file describes how loader should set up
default namespace for different kind of binaries.
Note that vendor and some of system binaries are
not yet ready for this config to be enabled - they
rely on libraries they shouldn't be relying upon.
Bug: http://b/30435785
Test: m
Change-Id: I7d5853a6b55db169be1dc2c38cc682711bf7f7f5
Motivation:
1. Reduce skew between userdebug and user builds.
2. Make the decision to mount debugfs on debug builds on a
per-device basis.
3. Prepare to not mount it at all to reduce the attack surface
of the kernel, reduce boot time, and free up memory.
4. Remove the selinux denial on devices that mount twice, i.e.
unconditionally in the device specific .rc file and in the
init-debug.rc file.
avc: denied { mounton } for path="/sys/kernel/debug" dev="debugfs"
ino=1 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0
tclass=dir permissive=0
If desired, debugfs may be mounted in device specific rc files
instead.
Bug: 31856701
Bug: 35197529
Test: Build and boot Marlin. Selinux denial no longer observed.
Change-Id: Ie0d954f77f7cf70ed2b94f67a57a6c9eba45ba8e
Add SANITIZE_LITE_SERVICES to drive usage of asan.options for a
large set of native services.
Test: m SANITIZE_TARGET=address SANITIZE_LITE=true
Test: m SANITIZE_TARGET=address SANITIZE_LITE=true SANITIZE_LITE_SERVICES=true
Change-Id: I84458dcc1b193b762daeb3004cf6c49e2fd8fae2
Current init doesn't order the triggeres it scaned, and there is no
guarantee that general event trigger exec first and then event+property
triggers.
This CL will make sure netd started after post-fs-data trigger is done.
Bug: 35110957
Test: marlin boots
Change-Id: I7bb55af4e00f336682388abfa8a06eac2136b7d4
This change makes the init process to always attempts to enable
transient trigger for vibrator. This allows the exported properties to
change the ownership later at the on boot stage.
Test: device vibrates with the driver supports ledtrig-transient
Change-Id: If5eb7b7feaefe803f2ead634fbe4fc7b48da84ea
Signed-off-by: David Lin <dtwlin@google.com>
When native coverage is enabled, add a global GCOV_PREFIX
environment variable specifying that gcda files be output
with path prefix /data/local/tmp.
Bug: 35635587
Test: make NATIVE_COVERAGE=true; check init.environ.rc
Change-Id: I40972aea3ca3168d0687bdc93e9d4b7b3a1071b9
Parts of this change were accidentally reverted by an incorrect
manual merge conflict resolution.
Bug: 35306127
Test: manual
Change-Id: I8e6d6b07dcaa548775213dd42ba9def7431c62d3
Siarhei Vishniakou