If a device is unplugged, a BIND will happen without an ENABLE until the
device is plugged in, which would previously result in adbd crashing
every 5 seconds due to an attempt to join a thread that hadn't been
started.
Bug: http://b/128255355
Test: manually observed adbd via serial cable while unplugged
Change-Id: I90d6384e7e829df1ffaf73a95f2418a2ff97fb03
Reduce the operation sizes to sizes that are small enough that the
kernel will run the OOM killer to try to make them succeed. Compensate
for the smaller operation sizes by increasing the queue depth.
Bug: http://b/126582877
Test: benchmark_device.py
Change-Id: I4d351f56c8f83fea882614238cc3fec8ba1e9bf9
The kernel does a kmalloc of the write size for each write during
io_submit, which can lead to failure if the kernel's heap is fragmented
such that it can't allocate a contiguous 1MB chunk. Partition writes
into 16 page chunks which are much more likely to succeed.
Bug: http://b/126582877
Test: test_device.py
Change-Id: Ib2d48561594e1d81f1a2f62e34eaa40265ac47c4
Switch to the nonblocking FFS implementation that fixes several race
conditions on connect/disconnect.
Test: treehugger
Change-Id: I91fdb9b27152078cb38e610861a05f1fa95aa3a2
Detect kernels that don't support AIO on functionfs endpoints and fall
back to the old legacy implementation.
Test: treehugger
Change-Id: Ice28dcd40c9730ac2dd5e468d065b41c0e076146
Implement a Connection that implements a nonblocking interface to
functionfs, to replace the existing implementation that uses two
threads that loop and call read and write respectively. The existing
implementation is vulnerable to a race condition that can occur when a
connection is terminated, where one thread can notice failure and
complete reinitialization of the USB endpoints before the other thread
noticed anything went wrong, resulting in either the first packet
coming from the other end disappearing in to the void, or the other end
getting a packet of garbage.
As a side benefit, this improves performance on walleye from:
push 100MiB: 10 runs: median 49.48 MiB/s, mean 50.00 MiB/s, stddev: 2.77 MiB/s
pull 100MiB: 10 runs: median 75.82 MiB/s, mean 76.18 MiB/s, stddev: 6.60 MiB/s
to:
push 100MiB: 10 runs: median 73.90 MiB/s, mean 73.51 MiB/s, stddev: 5.26 MiB/s
pull 100MiB: 10 runs: median 105.90 MiB/s, mean 107.19 MiB/s, stddev: 6.10 MiB/s
Test: python test_device.py
Change-Id: I9b77c1057965edfef739ed9736e5d76613adf60a
Extract common functionality that will be useful for implementing a
nonblocking Connection for functionfs.
Test: mma
Change-Id: Iae4f3d55b2f56568d4a5138db9a2af5622eb83ad
Fastboot protocol doesn't include zero packets,
so make it possible to configure that.
Allow fastbootd to see how many bytes the handle
can read/write at once.
Test: adb works
Bug: 78793464
Change-Id: I31e444f384d9d0cdf1ea936439b2028f8151c3b8
Previously, read and write would return 0
on success. Now it will return the number
of bytes read/write. This is more consistent
with other usb handles and is needed in order
to handle partial packets (for fastbootd).
Update usb_write in other usb handles
to return amount written.
Change transport_usb accordingly.
Test: adb works
Bug: 78793464
Change-Id: If07ff05fbc8120343f20661475d34f4e5ff805de
Fastbootd will reuses adb's functionfs transport
implementation.
Move it to daemon/include as well so it can be accessed
with "adbd/usb.h". Otherwise usb.h will conflict with
other imports.
Test: adb builds and works
Bug: 78793464
Change-Id: If3ba190d5c74b5f3633411f0484195e5a2a34d44
Remove some redundancy by moving io_setup
into aio_block_init. The io_contexts will
now live till the end of the program, similar
to the rest of usb_handle
Test: adb works
Bug: 78793464
Change-Id: I910a39d4395645f1ff231f265c285a72893a0ac6
io_submit sleeps waiting for the gadget
to be enabled. Currently if that sleep
is interrupted it will shut down adb,
causing it to have to start back up again.
Rather than return EINTR if interrupted,
io_submit actually completes and the EINTR
is found later when looking through events.
Since an io that is interrupted will be
small anyway, add a loop to retry small ios.
Also upgrade aio logs in accordance with
their importance.
Fixes: 75981904
Test: adb works, logs show successful interrupt handling
Change-Id: I35973fce130ee849ce59fef80d15b65afb816ba4
(cherry picked from commit 6e9a327504)
All devices that previously used ENDPOINT_ALLOC
are on the new async io routines. None of the devices
using aio_compat have ENDPOINT_ALLOC so remove the
code to stop logging failures.
Fixes: 74213465
Test: adb works
Change-Id: I0c903eb76b006b6bcce48cec24f5353fa47cc128
(cherry picked from commit 9a1be3ad0e)
This change opens the control, bulk-in, and bulk-out FunctionFS
endpoints with O_RDONLY or O_WRONLY.
Bug: 70349025
Test: Android on Chrome OS can still use ADB
Test: aosp_sailfish-userdebug can still use ADB
Change-Id: I3895b626cf7cec8437c36bdc6c6e6055aaf3777c
This method works around the downsides of
ENDPOINT_ALLOC, namely that it is not affected
by memory fragmentation and it uses an upstream
interface.
Also add libasyncio to provide the necessary syscalls
to both adb and mtp.
Add some small optimizations to file_sync.
Bug: 37916658
Test: run adb push/pull
Change-Id: If3b3be02b5e2d4f9cffec1b8ddc02a5768a51a1f
This reverts commit 05fe272a87.
Commit "adb: Do not signal gaget stack unless descriptors are written"
fixed the main issue for configfs devices where device wasn't enabled
until after the ioctl was attempted. Thus it is safe to bring up the
retry count so that the ioctl doesn't fail due to small delays in
usb stack.
Test: use adb, switch configs on configfs devices
We have std::thread now, so we can delete this cruft.
Test: python test_device.py
Test: adb_test
Test: wine adb_test.exe
Test: /data/nativetest/adbd_test/adbd_test
Change-Id: Ie1c1792547b20dec45e2a62ce6515fcb981c3ef8
While recovering from endpoint errors, the gadget stack was being
signalled even when desriptors were NOT being rewritten. Avoid this
as this might cause enumeration loops.
Bug: 36036550
Change-Id: Iff2b2fc8cded001ef3c77dc170dce3b96848970c
Sometimes when endpoint_alloc returns ENODEV,
max_rw will end up being a value that is too
big.
Bug: 35634401
Test: push/pull files
Change-Id: Iaa81a3311b1855e2a835562cdf7a46ff4399feb1
This allows reliable use of larger buffer sizes.
Max r/w size is set only when that preallocation
is successful so that memory is guaranteed to be
available.
Bug: 31722483
Test: adb push with multi GB files
Change-Id: Ia0459ca051988abb144645871792e8f840dd3ff7
Break adbd's USB initialization code into its own static library to
allow it to be used by benchmark code that pretends to be adbd.
Bug: http://b/31289465
Test: adb shell works on bullhead
Change-Id: I0ac7d78a4f7aef59bd6d14fc5cf1ed870e1f3a9d
Josh Gao