There was a build error in init.c if you enabled bootchart, this
should probably be shipped upstream if not fixed already.
Change-Id: Iea3451c3e15d5cac00c5420d99bfce9a950aaaac
The mmc block devices on panda boards use a platform device called
omap/omap_hsmmc.0. The number of path entries in the uevent after
the platform device is unknown, and the number of path entries in
the platform device is unknown, so the only way to determine how
many entries make up the platform device is to compare against
a list of platform devices.
Add a list of platform devices that have been registered, and
iterate through it to determine the platform device portion of
a block device uevent.
Change-Id: I1480bc6429172ca6997d548787be3863ce062472
In some situations a driver could try to request firmware before
/system is mounted. Previously we'd fail the request. Now we
will retry the read-from-filesystem every 100ms until we find the
firmware or we've finished the "fs" and "post-fs" stages of init.
Change-Id: Ie32402f7d41c818bf20f3297286ed5f99705b72c
Fix for bug 3415286. The persistent properties are normally read early
in the boot process after /data is mounted. However, for an encrypted
system, at that point /data is a tmpfs ramdisk. This change adds a new
command to init (load_persist_props) to read the persistent properties,
and adds an action to init.rc to load the persistent properties. This
action is triggered by setting a property in vold, but that's in a
different CL.
Change-Id: I74b3057974ee6029c29d956b76fef5566700d471
Ext4 filesystems like to be unmounted before rebooting. The Android system
doesn't have a traditional Linux init setup, and shutting down the system
was not much more than calling sync(2) and reboot(2). This adds a new
function to libcutils called android_reboot(). By default, it calls sync()
and then remounts all writable filesystems as read-only and marks them clean.
There is a flag parameter in which the caller can ask for sync() not to be
called, or to not remount the filesystems as read-only. Then it will call
reboot(2) as directed by the other parameters. This change also updates
adb, init and toolbox to call the new android_reboot() function.
Fixes bugs 3350709 and 3495575.
Change-Id: I16d71ffce3134310d7a260f61ec6f4dd204124a7
rm only removes a single non-directory directory entry (no -r support)
rmdir removes a single empty directory
Change-Id: I49702b02ba98a177027b126268c2c2846f968195
The UI needs to know if the device is running with an encrypted
filesystem or now. So set a read-only property at boot to let it know.
Change-Id: I753de2d606c975bcbe9946d10fd47558cf357dac
If a keychord is pressed when debugging is turned off, the main
event poll in init will return an event on the keychord fd,
but handle_keychord never reads the data. Once this happens,
the poll will always return immediately, and init enters an
infinite loop. Fix it by always reading from the keychord fd,
but only handling the returned keychord if debugging is
enabled.
Change-Id: Ie4efa98247d3cc978d275dc8a4516b32aa710278
These are the changes to init and init.rc necessary to
support booting with and encrypted /data filesystem.
A corresponding change to init.<device>.rc goes along
with this change.
Change-Id: I0c7e2cc39568358014a82e317735c0eae14dd683
This keyword will cause init to wait a few seconds before exec'ing
the target binary. Maybe only useful for hacks and debugging.
Change-Id: I85caa0bcbc0be7e48bd21eb9e31e039c0740c8d5
Under some circumstances, setuid() and family can fail,
returning a non-zero value. (see "man setuid" for details).
If this happens, we want to ensure that init doesn't spawn a
process which has root privileges when it's not suppose to.
Change-Id: Idd03f2c8f82a7eaf6e696b5bcfe308e51ea58b52
If firmware is not found, write -1 /sys/$DEVPATH/loading to cancel the
firmware load. Otherwise the driver has to wait for the 60s timeout.
Change-Id: Id2787cda9b2be45b9adea41f6f161cd54cda212e
Signed-off-by: Benoit Goby <benoit@android.com>
This should be much nicer than peppering init.rc with chown/chmod
directives.
Also, remove some dead code and obsolete comments.
Change-Id: I10895f10a9cf2f1226c8d12976cd3db3743da9ec
This enhances robustness by allowing the Telephony Framework to restart
ril-daemon if it notices some catastrophic failure.
Added setprop ctl.restart.
Added ril-daemon to setprop control_perms and allow users/groups
with the AID_RADIO ID to control it.
Change-Id: I195abdd754a731ce0b77e8f71ab47fde8c3e7977
Merge commit '78ea2374c5c87d7bb58747b1a6173c598f386600'
* commit '78ea2374c5c87d7bb58747b1a6173c598f386600':
init: Add support for SOCK_SEQPACKET socket type
Merge commit '912ff85b035e0e6bc109812c1ea5661ea4df5967' into gingerbread-plus-aosp
* commit '912ff85b035e0e6bc109812c1ea5661ea4df5967':
init: Add support for SOCK_SEQPACKET socket type
- look in /vendor/firmware/... in addition to /system/etc/firmware/... for firmware loading
- add /vendor/bin to path before /system/bin
- add /vendor/lib to ldpath before /system/lib
- configure appropriate permissions for /system/vendor/bin
- symlink /vendor -> /system/vendor
Change-Id: I0c06ca1e38a44f0c7024cee6cea8907aa93a4532
Merge commit '49b8124a1759cb8b27e0c21a1a5a54b8a81bdb19'
* commit '49b8124a1759cb8b27e0c21a1a5a54b8a81bdb19':
Use makedev helper for device major and minor numbers
Merge commit '17dcc5c57dcffb919f3de65ff7a0134ffa3bd874' into gingerbread-plus-aosp
* commit '17dcc5c57dcffb919f3de65ff7a0134ffa3bd874':
Use makedev helper for device major and minor numbers
Major and minor numbers can be greater than 255. Major numbers
are 12 bits, and minor numbers are 20 bits. Supporting major
and minor numbers > 255 allows the use of the extended block
device for extra mmc partitions.
Change-Id: I4c42bfe0781069e8e4cb13ebe26e860cdc03f866
Since we now support USB host mode, devices might get a different device
file depending if other devices are connected on the host port. This
patch creates symlinks to USB character devices that depend on the port
devices are connected to, but not on the order they have been probed.
(e.g. /dev/usb/tty2-1:1.0 -> /dev/ttyUSB0)
Change-Id: I285bcc2d59446fbff8a7abbe39c21781f3bb4bd3
Merge commit 'fad7204e9eac20a87afacd7547ed8202a39319f8' into gingerbread-plus-aosp
* commit 'fad7204e9eac20a87afacd7547ed8202a39319f8':
validate the source of uevent messages
Merge commit '742150c031756da1393bf4223b2468b17cb79326'
* commit '742150c031756da1393bf4223b2468b17cb79326':
Use complete hardware name without spaces.
Merge commit '62a54f3b1343043528b7e93c1a4311a5e9d5f358'
* commit '62a54f3b1343043528b7e93c1a4311a5e9d5f358':
init: use tmpfs/ftruncate for properties backing store instead of ashmem
This removes the need for ashmem for early bringup and avoids an issue
with permissions enforcement.
Change-Id: I405b080660934d73048c79d614b6b2ebc43ab182
Signed-off-by: Brian Swetland <swetland@google.com>
init now creates files in /dev/bus/usb/ for user access to USB devices.
Files are chmod 660 with group AID_USB.
Signed-off-by: Mike Lockwood <lockwood@android.com>
init now creates files in /dev/bus/usb/ for user access to USB devices.
Files are chmod 660 with group AID_USB.
Signed-off-by: Mike Lockwood <lockwood@android.com>
make doesn't seem to handle the absolute symlink from
$OUT/root/sbin/ueventd to /init well - it follows the link during
dependency resolution, decides $OUT/root/sbin/ueventd doesn't exist
because /init doesn't exist, and relinks it every time.
Change-Id: I9ca1c14fe5fa80634f51ffc51a7c73146d29d42e
When the init process ran out of actions to execute, cur_action was
NULL and action_queue_empty() was true, but cur_command was still
set. This patch clears cur_command when a new action is retreived,
and only depends on cur_action and action_queue_empty() to determine
the poll timeout.
Change-Id: Iaa95063c8c267a5b1ada9f20363b99c433e61ac4
If any child processes exit before signal_init, they won't get reaped
unless another child process exits after signal_init. Calling
handle_signal from signal_init forces them to be reaped immediately.
Change-Id: I459cfbfe6cf00f29454c62a8c840baf21cb1fb03
eMMC block device names may change based on the detection order of
the eMMC device and any other SD bus devices, such as a removable SD
card.
This patch adds support to init for:
* Symlinks to block devices. When a block device uevent is
processed, if it starts with "/devices/platform", the platform
driver name is parsed out, and symlinks to the block device are
created in /dev/block/platform/<platform driver>/
* Symlinks based on partition name and number. If the uevent for
a block device contains information on the partition name or
number, symlinks are created under
/dev/block/platform/<platform driver>/by-num/p<partition>
and
/dev/block/platform/<platform driver>/by-name/<partition name>
init.rc can then use a device path like the following to mount an
eMMC device:
/dev/block/platform/<platform>/by-name/system /system ro
Change-Id: Id11bb7cdf1e2ada7752a5bd671cbf87237b34ae2
Devices with non-MTD storage need to override the filesystem mounting
commands in init.rc. Moving them to a new "fs" init level allows a
custom init.<device>.rc to handle the mounting.
Change-Id: If0e655139b9734650fb798b6eb0a90e2241fc29b
Merge commit '1404c27bff1499dae9b640870ce2251d78cdc5ef' into eclair-plus-aosp
* commit '1404c27bff1499dae9b640870ce2251d78cdc5ef':
system/core/init: set proper permissions for tpa2018d1 (CDMA)
Drop init's egid to AID_INPUT while creating the device node, so that it is
created with the correct gid. This eliminates the
possibility of system_server opening the device node before its permissions
are set correctly.
Using setegid() allows us to swap back to AID_ROOT immediately after mknod().
Bug: 2375632
The rationale being that we do not want this enabled by default, but
tying it to adb being enabled allows convenient bugreport collection
for savvy users and developers using production devices.
Change-Id: I71535b33f0774faf1975c98d106080f2ff12e349
Signed-off-by: Mike Lockwood <lockwood@android.com>
This change enables persist.security.* flags in the device, allowing oly the system to modify them.
Change is necessary to allow for further progress in the project, as this is an ideal location for access both from the
framework as well as from the recovery mode / transition.
Merge commit '7789f4cc4b712f15e0e5306a874ad6f47dc8c5c0' into eclair-mr2-plus-aosp
* commit '7789f4cc4b712f15e0e5306a874ad6f47dc8c5c0':
init: devices: Remove pmem_gpu regions as they are not needed since we have an mmu
Merge commit '065694b32e481a50e57a793d61181494fbf6ef04' into eclair-plus-aosp
* commit '065694b32e481a50e57a793d61181494fbf6ef04':
init: devices: Remove pmem_gpu regions as they are not needed since we have an mmu
Nick Kralevich