Recovery will soon support a minimal implementation of adbd which will
do nothing but accept downloads from the "adb sideload" command and
install them. This is the client side command (mostly resurrected out
of the old circa-2007 "adb recover" command) and the new connection
state.
Change-Id: I4f67b63f1b3b38d28c285d1278d46782679762a2
Normally only bandwidth stats for the uid reading .../stats is returned.
With the extra group, adb shell will be able to read stats from
all UIDs.
This is to be used to offer data usage profiling to developers.
Change-Id: If3d2941ce5aa4dbb1a23947b97b893149ba224f7
Fixed memory leak when using transport:serial. Code was previously
using strdup() to make a copy of the serial number which was not
necessary. Instead, just set serial=service.
Change-Id: Ifa8fe7999c6fb88955d2c6bdfcd3cd724ec1f020
Signed-off-by: Tom Marlin <tomm@bsquare.com>
* Add support for correctly handling subprocess termination in shell service (b/3400254 b/3482112 b/2249397)
- have a waitpid() track the subprocess, then notify the fdevent via a socket
- force an eof on the pty master in fdevent's new subproc handler.
- modify fdevent to force-read the pty after an exit.
* Migrate the "shell:blabla" handling to "#if !ADB_HOST" sections, where it
belongs.
* Fix the race around OOM adjusting.
- Do it in the child before exec() instead of the in the parent as the
child could already have started or not (no /proc/pid/... yet).
* Allow for multi-threaded D() invocations to not clobber each other.
- Allow locks across object files.
- Add lock within D()
- Make sure sysdesp init (mutex init also) is called early.
* Add some missing close(fd) calls
- Match similar existing practices near dup2()
* Add extra D() invocations related to FD handling.
* Warn about using debugging as stderr/stdout is used for protocol.
* Fix some errno handling and make D() correctly handle it.
* Add new adb trace_mask: services.
* Make fdevent_loop's handle BADFDs more gracefully (could occur some subproc closed its pts explicitely).
* Remove obsolete commandline args reported in help. (b/3509092)
Change-Id: I928287fdf4f1a86777e22ce105f9581685f46e35
This is for http://b/3482112 "adb interactions with device causing test harness failures".
This reverts commit 69c5c4c45b.
Change-Id: I630bf2e04d2ecf0223bd2af4e87136754ff880d3
* Handling of the subprocess and its FD.
This fixes http://b/3400254 "Many bugreports getting hung at the end in monkey"
- Start up a service thread that waits on the subprocess to terminate,
then closes the FD associated with it.
- Have the event handler select() with a timeout so that it can
detect the closed FD. Select() with no timeout does not return when an FD is closed.
- Have the event handler force a read on the closed FD to trigger the close sequence.
- Migrate the "shell:blabla" handling to "#if !ADB_HOST" sections.
* Fix the race around OOM adjusting.
- Do it in the child before exec() instead of the in the parent as the
child could already have started or not (no /proc/pid/... yet).
* Allow for multi-threaded D() invocations to not clobber each other.
- Allow locks across object files.
- Add lock within D()
* Add some missing close(fd) calls
- Match similar existing practices near dup2()
* Add extra D() invocations related to FD handling.
* Warn about using debugging as stderr/stdout is used for protocol.
Change-Id: Ie5c4a5e6bfbe3f22201adf5f9a205d32e069bf9d
Signed-off-by: JP Abgrall <jpa@google.com>
accept() creates a new file descriptor that should be closed on exec so
that forked processes don't keep a fd opened on the socket.
This also fixes b/3297070 where adb hangs after running adb on the
target.
Change-Id: I8df511289e5549ae49b4824c9dfb71a3bf85eae8
This patch makes the traces easier to read. For example transports are
displayed by name/serial instead of their hex address.
Change-Id: I7e8df44ddbec19754d63d989bd56485998b4627b
accept() creates a new file descriptor that should be closed on exec so
that forked processes don't keep a fd opened on the socket.
This also fixes b/3297070 where adb hangs after running adb on the
target.
Change-Id: I8df511289e5549ae49b4824c9dfb71a3bf85eae8
This patch makes the traces easier to read. For example transports are
displayed by name/serial instead of their hex address.
Change-Id: I7e8df44ddbec19754d63d989bd56485998b4627b
to print msg.command as some odd decimal number is just not helping in debugging;
instead print msg.command as a string
Change-Id: Id1ec770c20c86b8bdae40a0262bf4b63c0213b0a
Port number is now optional. Will use default port 5555 if not specified.
"adb disconnect" with no additional arguments will disconnect all TCP devices.
Change-Id: I7fc26528ed85e66a73b8f6254cea7bf83d98109f
Signed-off-by: Mike Lockwood <lockwood@android.com>
- adb can now connect to an emulator configured with an arbitrary
pair of <console port, adb port>. These two ports do not have to be
adjacent.
This can be done from the commandline at any time using
adb connect emu:<console_port>,<adb_port>
- Emulators running on ports outside the normal range
(5554/5555-5584/5585) register themselves on startup if they follow
the convention "console port+1==abd port".
- Emulators outside the normal port range will not be auto-detected on
adb startup as these ports are not probed.
- The index into local_transports[] array in transport_local.c does no
longer indicate the port number of the local transport. Use the altered
atransport struct to get the port number.
- I have chosen not to document the adb connect emu:console_port,adb_port
syntax on adb's help screen as this might be confusing to most readers
and useful to very few.
- I don't expect this to introduce any (backwards) compatibility issues.
Change-Id: Iad3eccb2dcdde174b24ef0644d705ecfbff6e59d
Signed-off-by: Mike Lockwood <lockwood@android.com>
This is the first CL of a somewhat larger effort which, among other things,
will involve changing the emulator and ddms to talk to adb running on a
configurable port.
The port can be configured using environment variable ANDROID_ADB_SERVER_PORT.
Further CLs will also address the set of ports used for the local transport.
Change-Id: Ib2f431801f0adcd9f2dd290a28005644a36a780a
This was used for adb networking, which no longer exists.
This code also failed when adb was not running as root.
Change-Id: Ied86fb1930094d5ae5009684d25e15385fd31d03
Signed-off-by: Mike Lockwood <lockwood@android.com>
In addition to service.adb.tcp.port, you can now set persist.adb.tcp.port
to specify the port number for adb to listen to instead of USB.
This allows the adb TCP configuration to persist across reboots.
Change-Id: I897ffcb019e8dd1785996d2f3c571cfc2f8ded38
Signed-off-by: Mike Lockwood <lockwood@android.com>
Also check that device is not already connected in "adb connect"
Change-Id: I5f84b56b63d8c6932f23791cac319fd6bc39d36c
Signed-off-by: Mike Lockwood <lockwood@android.com>
Added new commands:
adb connect <host>:<port> (to connect to a device via TCP/IP)
adb tcpip <port> (to restart adbd on the device to listen on TCP/IP)
adb usb (to restart adbd on the device to listen USB)
Signed-off-by: Mike Lockwood <lockwood@android.com>
This will allow rebooting the device via adb on any build, including user builds.
An optional argument can be provided
(for example, "adb reboot bootloader" or adb reboot recovery")
Signed-off-by: Mike Lockwood <lockwood@android.com>
To enable logging, set the property persist.adb.trace_mask to a hex value
containing the bitmask for adb_trace_mask (see the TRACE_* enum values in adb.h).
This will result in adb writing log output to a file in /data/adb/
No logging will occur if persist.adb.trace_mask is not set or has a value
that cannot be parsed as a hex integer.
The property is read once only at startup, so you must reboot or restart adbd
for changes in the property to take effect.
Signed-off-by: Mike Lockwood <lockwood@android.com>
Vendor IDs are read from ~/.android/adb_usb.ini. The format is very simple:
1 number per line. First number is ID count, followed by the ID themselves.
Lines starting with # are considered comments.
Other misc changes: moved VENDOR_ID_* to usb_vendors.c to prevent direct
access. Made transport_usb.c reuse the USB constant introduced in usb_osx
(moved them to adb.h)
Added usb_vendors.* which handles creating (and deleting) a list of vendor ids.
This list is meant to be used everywhere the built-in lists (usb_osx), or the
built-in vendor IDs (transport_usb) were used.
For now the list is only built with the built-in VENDOR_ID_*. Next step
is to read a small file created from all the SDK add-on.
Other misc changes: made is_adb_interface present only if ADB_HOST is true
to prevent accessing a list that doesn't exist (usb_vendors is only
compiled for the host version of adb).
Nick Kralevich