ro.logd.kernel, ro.config.low_ram, ro.logd.timestamp and ro.debuggable
need to be retrieved prior to logd start in order for the service to
behave in a configured manner. Other essential services are also
dependent on these system properties as well, so it just makes sense
to pick them all up first in 'on fs'.
Test: smoke test
Bug: 37425809
Change-Id: I33ad185f397ee527ed3c84cc2bcb40ff8ca785b5
Currently if a process sets the sys.powerctl property, init adds this
property change into the event queue, just like any other property.
The actual logic to shutdown the device is not executed until init
gets to the action associated with the property change.
This is bad for multiple reasons, but explicitly causes deadlock in
the follow scenario:
A service is started with `exec` or `exec_start`
The same service sets sys.powerctl indicating to the system to
shutdown
The same service then waits infinitely
In this case, init doesn't process any further commands until the exec
service completes, including the command to reboot the device.
This change causes init to immediately handle sys.powerctl and reboot
the device regardless of the state of the event queue, wait for exec,
or wait for property conditions.
Bug: 37209359
Bug: 37415192
Test: Init reboots normally
Test: Update verifier can reboot the system
Change-Id: Iff2295aed970840f47e56c4bacc93001b791fa35
libui.so is not used by SP-HALs, so it is removed from the list of libs
exposed from the default namespace.
Also, this fixes a warning message "property value is empty" caused by
the automatically removed trailing '/' for the section 'legacy'. Since
the legacy behavior is already implemented by the linker itself, the
behavior doesn't need to specified in ld.config.txt.
Test: marlin/sailfish boots
Test: no warning message is shown
Change-Id: Ib679794d63b01c6794663dc88f1ab7e72cfb11d3
Starting zygote early requires cpuset to be initialized to all cores for
foreground cpuset. Change to expolit all cores by default at boot and
let device manufacturers override to proper values in device specific
init script.
Bug: 36576280
Test: marlin boot fast and checked cpuset during early boot
Change-Id: I2c1ce0630e58a7b04d1a453c6740d3f0bce9de9f
Now, framework process (any process that is executing /system/bin/* or
/system/xbin/*) are started with three namespaces; default, sphal and
vndk.
default namespace is the namespace that is responsible for loading libs
from /system/lib. It can't load libs from other places such as
/vendor/lib. (However, we temporarily open the path since we haven't
finished the system partition cleanup, but will do eventually).
sphal namespace is the namespace where SP-HAL (Same-process HAL) is
loaded. SP-HAL are the only vendor libraries that are allowed to be
loaded inside framework processes. libEGL_<chipset>.so and
android.hardware.graphics.mapper@2.0-impl.so, etc are SP-HALs. When
framework needs to load those SP-HALs, it explicitly loads it from this
namespace using android_get_exported_namespace() and
android_dlopen_ext().
vndk namespace is the namespace for loading vndk-sp (Vendor-NDK for
Same-Process) libs, which is a small set of framework libraries that
SP-HALs can link against. These libraries are compiled for the same
version of Android that the vendor partition is compiled against.
SP-HALs can not use libraries other than vndk-sp and ndk libs.
Membership to vndk-sp and ndk are strictly closed.
Note that in a system, there are two copies of vndk-sp libs. One at
/system/lib and the other at /vendor/lib/vndk-sp. As a result, there can
be two instances of a same library in a process.
Also adds ld.config.legacy.txt which is used on non-Treble devices where
PRODUCT_FULL_TREBLE is not set to true.
Note, this split can be cleaned up further after b/37139976 is solved.
Bug: 34407260
Test: git diff HEAD:rootdir/etc/ld.config.legacy.txt
HEAD^:rootdir/etc/ld.config.txt => 0
Test: sailfish boots (because BOARD_VNDK_VERSION is not set to
'current')
Change-Id: I8331d94edc38f22c4f8abc66cdf2050af9d0605b
* changes:
ueventd: Fix up string handling in handle_*_device_event()
ueventd: convert mkdir_recursive() to std::string
ueventd: move subsystem logic from code to ueventd.rc
With the binder traffic of composer moved to vndbinder,
vndservicemanager is needed to be started early to get bootanim
displayed quickly.
Also servicemanager is required to be start early to support early
bootanim and sufaceflinger.
Bug: 37306311
Test: bootanim regression fixed
Change-Id: Ice1e05bdb3fe4e67a63a49f1db8afdb018c7b61b
This CL disables module loading by writing 1 to
/proc/sys/kernel/modules_disabled when the property sys.boot_completed
is set to 1 by ActivityManagerService (at the broadcast of
PHASE_BOOT_COMPLETED).
Bug: 36515654
Test: tested on sailfish and verified that module loading is disabled in
userdebug and enabled in eng mode
Merged-In: Id38d34a6395966ab21e440614337c0cfca791ad0
(cherry picked from commit 6ed19d1675)
Change-Id: I2faa459b450b3a64f854c832c6b91cbf682bbffa
This was marked deprecated in 2014 and removed in 2015, let's remove
the uevent rule now too.
Test: see that logging still works on bullhead
Change-Id: Idaf3f49a1afe7046eba6c976628b9f1c8b3ec094
This CL disables module loading by writing 1 to
/proc/sys/kernel/modules_disabled when the property sys.boot_completed
is set to 1 by ActivityManagerService (at the broadcast of
PHASE_BOOT_COMPLETED).
Bug: 36515654
Test: tested on sailfish and verified that module loading is disabled in
userdebug and enabled in eng mode
Change-Id: Id38d34a6395966ab21e440614337c0cfca791ad0
The class early_hal is essentially for the keymaster hal which needs
to be up before vold tries to unlock a storage encryption key (FDE or
FBE). The current position is too early in the boot process, because
on devices with legacy HAL the wrapper service uses system properties
to find the legacy HAL.
This patch moves the start of the early_hal class to the late-fs trigger
action which runs right after the system property action.
Test: Manually tested and update tested on bullhead, sailfish, and
another device.
Bug: 35764921
Change-Id: I34b45b85f8450e9ef18861535fdb2ee963df8c9b
(cherry picked from commit 1ad8d21947)
The class early_hal is essentially for the keymaster hal which needs
to be up before vold tries to unlock a storage encryption key (FDE or
FBE). The current position is too early in the boot process, because
on devices with legacy HAL the wrapper service uses system properties
to find the legacy HAL.
This patch moves the start of the early_hal class to the late-fs trigger
action which runs right after the system property action.
Test: Manually tested and update tested on bullhead, sailfish, and
another device.
Bug: 35764921
Change-Id: I34b45b85f8450e9ef18861535fdb2ee963df8c9b
This class is used to start hals which are required in order to mount
data (for instance keymaster).
Test: works to start early_hal in internal
Bug: 36278706
Change-Id: If06908135e59b187683d8cf4cc4a00b490559081
(cherry picked from commit 5d56bad4bd)
This class is used to start hals which are required in order to mount
data (for instance keymaster).
Test: works to start early_hal in internal
Bug: 36278706
Change-Id: If06908135e59b187683d8cf4cc4a00b490559081
Move things over to the new layout.
Bug: 36458146
Test: m && m SANITIZE_TARGET=address SANITIZE_TARGET_SYSTEM=true
Change-Id: I4dba269f82e4f88e39f926c6c2dd3c5efa07b2a1
Add init script and shell script to unzip a tar containing ASAN
libraries on boot.
Bug: 36458146
Test: m && m SANITIZE_TARGET=address
Test: manual (build steps for tar missing)
Change-Id: I1bcf332f86c5bf2e0333cbe3def684999c1002f8
Mark Salyzyn