The commands that use "host-serial:<serial-number>:<request>"
service did not handle "-s usb:<path>". The -s parameter is
passed as the serial number in the protocol and then matched
against either the serial number or device path. However,
skip_host_serial() in sockets.c did not know about the usb:
syntax, the serial number was parsed incorrectly. Before this
change:
$ adb -s usb:1-4.1 get-state
error: unknown host service
After:
$ adb -s usb:1-4.1 get-state
device
Code was added in find_transport() in transport.c to match device
paths, but find_transport() is only used for socket connections
so matching device paths is not needed.
Change-Id: I922cec963659dafadd0fbc8fa36dee3b55fe366c
Signed-off-by: Scott Anderson <saa@android.com>
system/core/adb/adb.c: In function 'connect_device':
system/core/adb/adb.c:1001: warning: comparison between signed and unsigned integer expressions
Change-Id: I206f85395e1d7ad8d6ef130a26c95dcf0f498696
Signed-off-by: Scott Anderson <saa@android.com>
Windows adb connection could be lost if the target
side kernel enables the kmemleak.
The root cause is that kmemleak downgrades USB
performance, and lead to Windows adb host application
timeout because usb_write()/usb_read()'s timeout time is
very short. That issue is not reproducible in Linux
host because its usb_write() timeout is 5s and usb_read()
is blocked until return:
usb_write() usb_read()
Linux 5000ms blocked until return
Windows 500+len*8 ms 500+len*8 ms
To fix that issue, extend the Windows adb host usb_write
timeout time to 5 seconds and usb_read() as a blocked routine:
usb_write() usb_read()
Windows 5000ms blocked until return
Change-Id: If54e2b4c396a5a06318c0ee0b3326a00e7661fbc
Signed-off-by: Yu Wang <yu.y.wang@intel.com>
Signed-off-by: Jin Can Zhuang <jin.can.zhuang@intel.com>
Signed-off-by: Jack Ren <jack.ren@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
For manufacturing and testing, there is a need to talk to
whatever device is connected to a given port on the host. This
change modifies adb's "-s" option to take either a serial
number or a device path. The device paths of the connected
devices can be listed using "adb devices -l" whose output
will resemble:
List of devices attached
016B75D60A00600D usb:2-5 device
3031D0B2E71D00EC usb:1-4.3 device
The second column lists the device paths. If the -l option is
not given, the output from "adb devices" will be the same as
it used to be (i.e. the paths will not be printed).
The device path can also be obtained with the get-devpath
command:
$adb -s 3031D0B2E71D00EC get-devpath
usb:1-4.3
Note that the format of the device paths are platform dependent.
The example above is from Linux. On OS-X, the paths will be
"usb:" followed by hex digits. For other platforms, the device
paths will be printed as "????????????" and the -s option will
not be able to select a device until someone implements the
underlying functionality.
Change-Id: I057d5d9f8c5bb72eddf5b8088aae110763f809d7
Signed-off-by: Scott Anderson <saa@android.com>
Init is going to be modified to set the umask to 077.
This will impact adb, as "adb install" and "adb sync"
assume that files will be world-readable / writable.
Keep adb's umask at 000 for now.
Bug: 3272072
Change-Id: I75978e8dd7bbdf4dbe7c9a691ef516235f207da2
The handling of adb root:/tpcip:/usb: is normally only for non-ADB_HOST.
This avoids getuid() being invoked on windows builds.
Change-Id: I365b81d9f70de99b9347d3eac82e690a8ac5e747
"adb root" creates a socket, then starts the service.
Socket creation should not set the exit_on_close when the service will be
a no-op.
Bug: 6259353
Change-Id: Ie526d2fad64f39a48051ed0ff6fb3405c2802ced
If an error occurs during the verification of an APK, it could be left
in the temporary installation directory.
Change-Id: I4afa5535fc0b978532b31d5b8fb63776963c39db
Services that cause adbd to reboot are currently implemented this way:
write(fd, response)
close(fd)
sleep(1)
exit(1)
sleep(1) is necessary to leave time for the transport to transmit
the response before the daemon exits. This is slow and unreliable.
Instead, add a flag to the asocket to make it exit the daemon only
after the socket is closed.
Change-Id: I9df45ea6221f0d9b828703b9b2316a5d4fe59352
BUILD_ADBD is always true
ANDROID_GADGET is not used in the code anymore. adbd now checks at
runtime if /dev/android_adb is present
Change-Id: If6c3278606c79cc74d1ef5978e7b8e3a4513aef8
whitelist connection for
1) emulator
2) "eng" or "tests" build, or
3) IP matches with "persist.service.adb.client_ip"
Change-Id: I8ac149149873f3bd206bd4d5abc063e5274fb468
Signed-off-by: Wei Zhong <wzhong@google.com>
When running inside the emulator, guest's adbd can connect to 'adb-debug' qemud
service that can display adb trace messages on condition that emulator has been
started with '-debug adb' option.
This CL enables that functionality in ADB code.
Change-Id: I59b4a76d3c887ad28b8aa8e2a01dfa814e75faa1
This patch adds Intel USB Vendor ID into the support
list for adb and fastboot.
Signed-off-by: Wu, Hao <hao.wu@intel.com>
Signed-off-by: Jack Ren <jack.ren@intel.com>
Scott Anderson