This reverts commit 6084a0124f.
The original build breakage is fixed by (a) building the verity
code for eng builds as well as userdebug builds and (b) moving
the exported remount service functions into a new header file.
Change-Id: Ice0c4f97d4db38ab7eb333c7a6e56bbd11123f5b
I keep trying to clean things up and needing std::strings. Might as
well just do this now.
usb_linux_client.c is going to stay as C because GCC isn't smart
enough to deal with the designated initializers it uses (though for
some reason it is in C mode).
The Darwin files are staying as C because I don't have a way to test
that they build.
The Windows files are staying as C because while I can actually build
for them, it's slow and painful.
Change-Id: I75367d29205a9049d34460032b3bb36384f43941
Much of adb is duplicated in bootable/recovery/minadb and fastboot.
Changes made to adb rarely get ported to the other two, so the trees
have diverged a bit. We'd like to stop this because it is a
maintenance nightmare, but the divergence makes this difficult to do
all at once. For now, we will start small by moving common files into
a static library. Hopefully some day we can get enough of adb in here
that we no longer need minadb.
Bug: 17626262
Change-Id: Ic8d5653bfcc0fec4e1acbece124402355084b864
If verity is enabled and the underlying block device is marked
read-only, disable-verity fails. We cannot use the existing code
for enable-verity to make the device writable as the device in
/proc/mounts will be the verity device instead of the underlying
device we want to change. This change makes the correct device
writable when altering verity state.
Change-Id: I423ee50fb34d78cff2fe843318b9081c03c5142d
Note that it is *easy* to break your phone with this feature. It is
not a bug that reenabling verity after changing one byte of the system
partition stops the device booting.
(cherry-pick of 7c442e1700e6312727283db402dec6f666f1b55a.)
Bug: 18529433
Change-Id: I632e91281884471a362960f1ba30312d2669b8ff
This reverts commit 152d2d4234.
Fixed build error, and also fixed memory leak spotted from warning.
(cherry-pick of bbb36319119edde9377fb80015235893c30d2bc9.)
Bug: 17691572
Change-Id: I23b5ba537f7b557432041d4338b38b9be434e981
Re-commit https://googleplex-android-review.googlesource.com/#/c/519430/
Add fix for win_sdk build.
Add socketpair debug log.
Also output thread information in log on host side.
(cherry-pick of adb09fa01a16d8c5c92c2f8d325e1678c531223f.)
Change-Id: I21021bc111a3f7362a91b70593e3738125878118
Most code is copied and pasted from adb.h.
Any file can just include it to enable tracing.
Removed some duplications.
Change-Id: Ie1ed9e9edbf92158aac84669fbcbf7dc85fe2cf0
The sideload-host mode turns the host into a server capable of sending
the device various pieces of the file on request, rather than
downloading it all in one transfer. It's used to support sideloading
OTA packages to devices without the need for them to hold the whole
package in RAM.
If the connected device doesn't support sideload-host mode, we fall
back to the older sideload connection.
Change-Id: I5adaedd8243dc3b76414bba0149879ca2bbf35fa
To facilitate device scripts that want to read/write binary data from
the host side, this change introduces a new "exec" service that
behaves like "shell" but without creating a pty, which would otherwise
mangle binary data.
After forking, it hooks up stdin/stdout of the child process to
the socket connected through to the host. The adb transport doesn't
support shutdown(), so the host can't half-close the socket and wait
for device termination. Instead, the host side now has two explicit
commands "exec-in" and "exec-out" for either sending or receiving
data.
Teach host side copy_to_file() to deal with stdin/stdout special
cases. Switch device side backup/restore services to use the new
create_subproc_raw under the hood.
Change-Id: I5993049803519d3959761f2363037b02c50920ee
This implements the logical opposite of 'adb forward', i.e.
the ability to reverse network connections from the device
to the host.
This feature is very useful for testing various programs
running on an Android device without root or poking at the
host's routing table.
Options and parameters are exactly the same as those for
'adb forward', except that the direction is reversed.
Examples:
adb reverse tcp:5000 tcp:6000
connections to localhost:5000 on the device will be
forwarded to localhost:6000 on the host.
adb reverse --no-rebind tcp:5000 tcp:6000
same as above, but fails if the socket is already
bound through a previous 'adb reverse tcp:5000 ...'
command.
adb reverse --list
list all active reversed connections for the target
device. Note: there is no command to list all
reversed connections for all devices at once.
adb reverse --remove tcp:5000
remove any reversed connection on the device from
localhost:5000
adb reverse --remove-all
remove all reversed connections form the current
device.
Reversed connections are tied to a transport, in other
words, they disappear as soon as a device is disconnected.
Simple testing protocol:
adb forward tcp:5000 tcp:6000
adb reverse tcp:6000 tcp:7000
nc -l localhost 7000
in another terminal:
echo "Hello" | nc localhost 5000
Will print "Hello" on the first terminal.
Change-Id: I761af790cdb06829b68430afa4145a919fa0e6d5
handle_packet() in adb.c didn't check that when an A_WRTE packet is
received, the sender's local-id matches the socket's peer id.
This meant that a compromised adbd server could sent packets to
the host adb server, spoofing the identity of another connected
device if it could "guess" the right host socket id.
This patch gets rid of the issue by enforcing even more checks
to ensure that all packets comply with the description in
protocol.txt.
+ Fix a bug where closing a local socket associated with a
remote one would always send an A_CLSE(0, remote-id, "")
message, though protocol.txt says that should only happen
for failed opens.
The issue was that local_socket_close() called
remote_socket_close() after clearing the remote socket's
'peer' field.
The fix introduces a new asocket optional callback,
named 'shutdown' that is called before that, and is
used to send the A_CLSE() message with the right ID
in remote_socket_shutdown().
Also add some code in handle_packet() to detect
invalid close commands.
Change-Id: I9098bc8c6e81f8809334b060e5dca4fc92e6fbc9
adb connect calls connect() in the event loop. If you pass a wrong ip
address or the server is slow to respond, this will block the event loop
and you can't even kill the adb server with adb kill-server. Handle connect
requests in a service thread instead.
Change-Id: I2ee732869a3dc22a6d3b87cf8ac80acaa7790037
Add a new connection state, so that devices, that require confirmation
to allow adb, appear as "unauthorized" in the adb devices lists.
Change-Id: Ib4264bc5736dedecf05bcf8e31896f4d7a91fad8
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a :-separated (; under
Windows) list of private keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: I4e84d7621da956f66ff657245901bdaefead8395
Secure adb using a public key authentication, to allow USB debugging
only from authorized hosts.
When a device is connected to an unauthorized host, the adb daemon sends
the user public key to the device. A popup is shown to ask the user to
allow debugging once or permanantly from the host. The public key is
installed on the device in the later case. Other keys may be installed
at build time.
On the host, the user public/private key pair is automatically generated,
if it does not exist, when the adb daemon starts and is stored in
$HOME/.android/adb_key(.pub) or in $ANDROID_SDK_HOME on windows. If needed,
the ADB_KEYS_PATH env variable may be set to a ;-separated list of private
keys, e.g. company-wide or vendor keys.
On the device, vendors public keys are installed at build time in
/adb_keys. User-installed keys are stored in /data/misc/adb/adb_keys.
ADB Protocol change:
If the device needs to authenticate the host, it replies to CNXN
packets with an AUTH packet. The AUTH packet payload is a random token.
The host signs the token with one of its private keys and sends an AUTH(0)
packet. If the signature verification succeeds, the device replies with
a CNXN packet. Otherwise, it sends a new AUTH packet with a new token so
that the host can retry with another private key. Once the host has tried
all its keys, it can send an AUTH(1) packet with a public key as
payload. adbd then sends the public key to the framework (if it has been
started) for confirmation.
Change-Id: Idce931a7bfe4ce878428eaa47838e5184ac6073f
Prior to this change, -s could take either a serial number or a
device path (e.g. "-s 01498B1F02015015" or "-s usb:1-4.2"). This
change extends -s to also allow product, model or device names
(e.g. "-s product:mysid"). These new qualifiers will only be
available on devices that are running an adb daemon that provides
properties in the connect message per Change-Id:
I09200decde4facb8fc9b4056fdae910155f2bcb9
The product, model and device are derived from the
ro.product.name, ro.product.model and ro.product.device
properties respectively. They are prefixed with "product:",
"model:" or "device:" as appropriate. In addition, any
non-alphanumerics in the model are changed to underscores.
If the -s parameter matches multiple devices, the result will be
the same as when multiple devices are connected but no -d, -e or
-s option is specified. In general, this means the user will get
"error: more than one device". However for get-state,
get-devpath and get-serialno, they will get "unknown".
The format of "devices -l" was changed to list all of the
qualifiers that are available. The following example output
(with the last digits of the serial numbers replaced with X's) is
with a Galaxy Prime with an older adb daemon and another Galaxy
Prime and Galaxy S both with the enhanced adb daemons:
List of devices attached
016B75D60A0060XX device usb:2-5 product:mysid model:Galaxy_Nexus device:toro
3731B535FAC200XX device usb:1-4.2 product:soju model:Nexus_S device:crespo
01498B1F020150XX device usb:1-4.1
Note that the serial number and state are now column oriented
instead of tab delimited. After the serial number and state, all
qualifiers are listed with each preceded by a space. The output
of the original devices command (without -l) is unchanged.
Change-Id: Iceeb2789874effc25a630d514a375d6f1889dc56
Signed-off-by: Scott Anderson <saa@android.com>
protocol.txt says that the connect message should have three
fields:
<systemtype>:<serialno>:<banner>
In reality, what is transmitted is simply:
<systemtype>::
The serialno is obtained via other means so doesn't really need
to be a part of the connect message. This change puts the
ro.product.name, ro.product.model and ro.product.device
properties in the <banner> for devices. Each property is
terminated by a semicolon (;) with the key and value separated by
an equals sign (=). Example message:
device::ro.product.name=<prd>;ro.product.model=<mdl>;ro.product.device=<dev>;
Making this change will enable the device list to provide more
information to the user and to give the potential for being able
to select which device to talk to with the -s option.
Change-Id: I09200decde4facb8fc9b4056fdae910155f2bcb9
Signed-off-by: Scott Anderson <saa@android.com>
This is the second version of a patch which demonstrates the possibility
of using adbd (Android Debug Bridge daemon) with a generic FunctionFS gadget
instead of a custom adb usb gadget in the Linux kernel. It contains changes
introduced after Benoit's review - thank you Benoit.
The patch adds a new usb access layer to adbd using FunctionFS. The former
usb access method is still available. The method is chosen at runtime
depending if /dev/usb-ffs/adb/ep0 or /dev/android_adb is accessible.
How to use on the target device:
$ insmod g_ffs.ko idVendor=<vendor ID> iSerialNumber=<some string>
$ mount -t functionfs adb /dev/usb-ffs/adb -o uid=2000,gid=2000
$ ./adbd
This patch requires a patch to bionic which adds <linux/usb_functionfs.h>
which is an exact copy of the relevant file in the linux kernel.
Change-Id: I4b42eb267ffa50fca7a5fba46f388a2f083e8b2d
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[benoit@android.com: detect at runtime if functionfs is mounted
or fallback using f_adb]
Signed-off-by: Benoit Goby <benoit@android.com>
For manufacturing and testing, there is a need to talk to
whatever device is connected to a given port on the host. This
change modifies adb's "-s" option to take either a serial
number or a device path. The device paths of the connected
devices can be listed using "adb devices -l" whose output
will resemble:
List of devices attached
016B75D60A00600D usb:2-5 device
3031D0B2E71D00EC usb:1-4.3 device
The second column lists the device paths. If the -l option is
not given, the output from "adb devices" will be the same as
it used to be (i.e. the paths will not be printed).
The device path can also be obtained with the get-devpath
command:
$adb -s 3031D0B2E71D00EC get-devpath
usb:1-4.3
Note that the format of the device paths are platform dependent.
The example above is from Linux. On OS-X, the paths will be
"usb:" followed by hex digits. For other platforms, the device
paths will be printed as "????????????" and the -s option will
not be able to select a device until someone implements the
underlying functionality.
Change-Id: I057d5d9f8c5bb72eddf5b8088aae110763f809d7
Signed-off-by: Scott Anderson <saa@android.com>
Services that cause adbd to reboot are currently implemented this way:
write(fd, response)
close(fd)
sleep(1)
exit(1)
sleep(1) is necessary to leave time for the transport to transmit
the response before the daemon exits. This is slow and unreliable.
Instead, add a flag to the asocket to make it exit the daemon only
after the socket is closed.
Change-Id: I9df45ea6221f0d9b828703b9b2316a5d4fe59352
When running inside the emulator, guest's adbd can connect to 'adb-debug' qemud
service that can display adb trace messages on condition that emulator has been
started with '-debug adb' option.
This CL enables that functionality in ADB code.
Change-Id: I59b4a76d3c887ad28b8aa8e2a01dfa814e75faa1
Recovery will soon support a minimal implementation of adbd which will
do nothing but accept downloads from the "adb sideload" command and
install them. This is the client side command (mostly resurrected out
of the old circa-2007 "adb recover" command) and the new connection
state.
Change-Id: I4f67b63f1b3b38d28c285d1278d46782679762a2
This reverts commit d15e6ac95d.
Also increment adb version to 1.0.29
Change-Id: I890643f0c18a2fe90f170134df039c54116cecda
Signed-off-by: Mike Lockwood <lockwood@android.com>
This is needed because the USB driver on the device no longer resets the bus
when exits and restarts.
Since the host side adb no longer detects that adbd has restarted we need
to reset the connection on the host side now.
Change-Id: I1a8eabd292e8b45c34fa07a8a8b8c609cc15648d
Signed-off-by: Mike Lockwood <lockwood@android.com>
It won't actually do anything until the 'bu' tool and framework are
updated to respond properly, but this is the adb side of the
necessary infrastructure: we copy the tarfile into the socket pointed
at the device, using the existing mechanisms.
Change-Id: Ic3b5779ade256bd1ad989a94b0685f7b1a7d59d2
* Add support for correctly handling subprocess termination in shell service (b/3400254 b/3482112 b/2249397)
- have a waitpid() track the subprocess, then notify the fdevent via a socket
- force an eof on the pty master in fdevent's new subproc handler.
- modify fdevent to force-read the pty after an exit.
* Migrate the "shell:blabla" handling to "#if !ADB_HOST" sections, where it
belongs.
* Fix the race around OOM adjusting.
- Do it in the child before exec() instead of the in the parent as the
child could already have started or not (no /proc/pid/... yet).
* Allow for multi-threaded D() invocations to not clobber each other.
- Allow locks across object files.
- Add lock within D()
- Make sure sysdesp init (mutex init also) is called early.
* Add some missing close(fd) calls
- Match similar existing practices near dup2()
* Add extra D() invocations related to FD handling.
* Warn about using debugging as stderr/stdout is used for protocol.
* Fix some errno handling and make D() correctly handle it.
* Add new adb trace_mask: services.
* Make fdevent_loop's handle BADFDs more gracefully (could occur some subproc closed its pts explicitely).
* Remove obsolete commandline args reported in help. (b/3509092)
Change-Id: I928287fdf4f1a86777e22ce105f9581685f46e35
This is for http://b/3482112 "adb interactions with device causing test harness failures".
This reverts commit 69c5c4c45b.
Change-Id: I630bf2e04d2ecf0223bd2af4e87136754ff880d3
* Handling of the subprocess and its FD.
This fixes http://b/3400254 "Many bugreports getting hung at the end in monkey"
- Start up a service thread that waits on the subprocess to terminate,
then closes the FD associated with it.
- Have the event handler select() with a timeout so that it can
detect the closed FD. Select() with no timeout does not return when an FD is closed.
- Have the event handler force a read on the closed FD to trigger the close sequence.
- Migrate the "shell:blabla" handling to "#if !ADB_HOST" sections.
* Fix the race around OOM adjusting.
- Do it in the child before exec() instead of the in the parent as the
child could already have started or not (no /proc/pid/... yet).
* Allow for multi-threaded D() invocations to not clobber each other.
- Allow locks across object files.
- Add lock within D()
* Add some missing close(fd) calls
- Match similar existing practices near dup2()
* Add extra D() invocations related to FD handling.
* Warn about using debugging as stderr/stdout is used for protocol.
Change-Id: Ie5c4a5e6bfbe3f22201adf5f9a205d32e069bf9d
Signed-off-by: JP Abgrall <jpa@google.com>
Added a new target for adb, so that the adb
host executable is built for the target as
well. This allows the target to connect to
any Android devices which are attached to it.
Bug: 3022194
Change-Id: Ib01983e70b75cec40a9ee161da7f4cf1343eecf2
Elliott Hughes