This is a precaution in case there are dependencies on the binaries in the
old location. b/124106384 tracks eliminating them (if any).
Test: Flash and check symlinks are there with adb shell ls -l system/bin
Test: adb shell system/bin/<binary>
Bug: 113373927
Bug: 124106384
Change-Id: Ib4102fe55117611f68184102e68a10ea47de0065
Originally, vndk_lite does not include system/lib/vndk-* directory but
searching the required files in system/lib instead. However, in GSI,
they are using the vndk libs which has symbols than core variants.
To avoid this problem, allow the vendor processes in vndk_lite devices
to search system/lib prior to vndk libs.
Bug: 124063441
Test: Check boot for vndk_lite devices.
Change-Id: I89a72e9d43d6fb05f4b6d87bbd4500f8febfe970
There are tests that require access to both system and vendor libraries,
like what the linker sets up when there is no matching config section.
Test: atest cameraservice_test libsurfaceflinger_unittest perfprofd_test \
inputflinger_tests (no new failures, but 3 old ones)
Test: Internal test can load libandroid.so
Bug: 124127405
Bug: 123700170
Change-Id: I4f5cb2e09bdf1ae510259198c08c252b41249d94
This commit fixes the search paths for vendor binaries in ASAN targets.
Test: Boot aosp_walleye-userdebug to home screen
Change-Id: Id87ceee3c43098bd453f6fae4f32ea62355f922b
This change fixes the problem that apexd is delaying the entire boot
sequence while waiting for the loopback devices to be created. The delay
was as big as 50 ms per a loopback device.
With this change, apexd is started much earlier: from "on post-fs-data"
to "on init". When it is first started, it scans /system/apex to
determine the number of APEXes and creates that number of loopback
devices priori. Since then it enters into the binder loop.
When the data partition is mounted, init lets apexd to initiate the
apexd boot sequence where APEXes in /data is scanned, verified, and
activated. Since the creation of the loopback devices were requested far
before, it is very likely that dev nodes for the devices are ready at
this moment (even if not, this isn't a lose).
Bug: 123404717
Bug: 123772265
Test: compare boot times.
init_zygote_START_TIME_avg is improved from 2831ms to 2622ms on blueline
Change-Id: I12450cee44aa4d17a11def62261c2f82d3f2c718
The sys.use_memfd property is set by default to false in Android
to temporarily disable memfd, till vendor and apps are ready for it.
The main issue: either apps or vendor processes can directly make ashmem
IOCTLs on FDs they receive by assuming they are ashmem, without going
through libcutils. Such fds could have very well be originally created with
libcutils hence they could be memfd. Thus the IOCTLs will break.
Set default value of sys.use_memfd property to true once the issue is
resolved, so that the code can then self-detect if kernel support is present
on the device. The property can also set to true from adb shell, for
debugging.
Bug: 113362644
Change-Id: I0f572ef36cac2a58fe308ddb90bbeffbecdaed3b
Signed-off-by: Joel Fernandes <joelaf@google.com>
JSON supports only decimal values and therefore file mode which should
use octal values has to be represented as strings. Fix the implicit
octal-to-decimal conversion and convert from string to octal in the code.
Bug: 111307099
Test: confirmed by verifying correct file permissions
Change-Id: I3ef9de0aea259f93bf74efeffca72d37d4740e15
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
- package manager needs to read from /data/apex/active, hence 0750
- both /data/apex/backups and /data/apex/sessions are internal to apexd,
hence 0700
Bug: 123927167
Fixes: 123927167
Test: apex_e2e_tests, flashall -w & checked folders were created
Change-Id: I06c28328afe4945d082acd890401651bd37fcb20
As of Id663c5f284e3b4fc65ed8cb8c2da6bcf6542e034, the asan libs
are in the TARGET_COPY_OUT_X subpath of the /data/asan/ dir, rather
than just 'x' unconditionally.
Test: presubmit
Change-Id: I3a515791e237ad10703415ea532c7a089660d8e9
TARGET_COPY_OUT_PRODUCT_SERVICES can be equal to
TARGET_COPY_OUT_PRODUCT, in which case the ld.config
lines containing PRODUCT_SERVICES are redundant.
Test: make and diff
Change-Id: I1dc24eb49d37f1ab0faa6eecdb0ccc974321f4ac
Abstract usage of cgroups into task profiles that allows for changes
in cgroup hierarchy and version without affecting framework codebase.
Rework current processgroup and sched_policy API function implementations
to use task profiles instead of hardcoded paths and attributes.
Mount cgroups using information from cgroups.json rather than from init.rc
Exempt-From-Owner-Approval: already approved in internal master
Bug: 111307099
Test: builds, boots
Change-Id: If5532d6dc570add825cebd5b5148e00c7d688e32
Merged-In: If5532d6dc570add825cebd5b5148e00c7d688e32
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Add cgroups.json and task_profiles.json file to be places under /etc/ on
the device to describe cgroups to be mounted and task profiles that
processes can request. This adds additional layer of abstraction between
what a process wants to achieve and how system implements that request.
Bug: 111307099
test: builds, boots
Change-Id: If92f011230ef5d24750e184bad776f30ba226f86
Merged-In: If92f011230ef5d24750e184bad776f30ba226f86
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
The vulkan runtime loads drivers into the sphal namespace and relies
on them being in the sphal search path so that it doesn't have to
hardcode /vendor/${LIB}/hw.
These paths used to be allowed, but were removed by commit 2498e1b
because they were believed not to be required. Things didn't break
immediately because the vulkan runtime has a (supposed to be
temporary) fallback to hw_get_module, which loads from
/vendor/${LIB}/hw using absolute paths.
Bug: 123600276
Test: Launch Vulkan app on device with hw_get_module disabled
Change-Id: I07ac43bc9d2d877d8f427058b2d62c62d065c558
This CL fixes the design problem of the previous mechanism for providing
the bootstrap bionic and the runtime bionic to the same path.
Previously, bootstrap bionic was self-bind-mounted; i.e.
/system/bin/libc.so is bind-mounted to itself. And the runtime bionic
was bind-mounted on top of the bootstrap bionic. This has not only caused
problems like `adb sync` not working(b/122737045), but also is quite
difficult to understand due to the double-and-self mounting.
This is the new design:
Most importantly, these four are all distinct:
1) bootstrap bionic (/system/lib/bootstrap/libc.so)
2) runtime bionic (/apex/com.android.runtime/lib/bionic/libc.so)
3) mount point for 1) and 2) (/bionic/lib/libc.so)
4) symlink for 3) (/system/lib/libc.so -> /bionic/lib/libc.so)
Inside the mount namespace of the pre-apexd processes, 1) is
bind-mounted to 3). Likewise, inside the mount namespace of the
post-apexd processes, 2) is bind-mounted to 3). In other words, there is
no self-mount, and no double-mount.
Another change is that mount points are under /bionic and the legacy
paths become symlinks to the mount points. This is to make sure that
there is no bind mounts under /system, which is breaking some apps.
Finally, code for creating mount namespaces, mounting bionic, etc are
refactored to mount_namespace.cpp
Bug: 120266448
Bug: 123275379
Test: m, device boots, adb sync/push/pull works,
especially with following paths:
/bionic/lib64/libc.so
/bionic/bin/linker64
/system/lib64/bootstrap/libc.so
/system/bin/bootstrap/linker64
Change-Id: Icdfbdcc1efca540ac854d4df79e07ee61fca559f
Getting it back in line with the normal ld.config.txt. This was missed in
http://r.android.com/854740.
Test: Flash and boot on marlin
Bug: 119867084
Bug: 113373927
Change-Id: Ic7e482133250eda20ff2c94c27bdee30e015ab5c
Support netd to load resolv Apex.
Switch namespaces when switching library paths between
/system and the APEX, so that internal library dependencies in both
locations are loaded from their own directory.
Bug: 119527674
Test: make; flash; lsof -p $(pidof netd)
Test: 1. manual test datacall/wifi work
2. manual test tethering work
3. system/netd/tests/runtests.sh
Change-Id: I3f69e85f2f529636f0ef29a2d9d71ad582c46dfb
Move APEX symlink creation to alternative module, one that
is targeted at /system not /. Also added comments to reflect
the tenuous connection between the module chosen and the
symlink creation.
Tested with:
rm -rf out/target/product/taimen/system \
&& make droid \
&& ls -l out/target/product/taimen/system/usr
Test: See above
Bug: 122985829
Bug: 123333111
Change-Id: I841dd42827ac2e082505ebf039f40fd394514e54
This change adds new socket declarations to the init scripts for the
Zygote processes. This socket is used for communication between the
System Server and the Blastula pool.
Bug: 68253328
Topic: zygote-prefork
Test: build image; flash device; launch apps
Change-Id: I5dbb87770b1a3100c6c122bb39ca854006bb0b0d
Merged-In: I5dbb87770b1a3100c6c122bb39ca854006bb0b0d
* changes:
Make libdexfile_external.so accessible from binaries and libraries in /system.
The runtime namespace needs to be visible since libopenjdk is loaded through dlopen().
There are dependencies on libdexfile_external from some central libraries
that are widely used (b/123186083).
One example is vendor/bin/hw/android.hardware.media.omx@1.0-service, which
requries the link from "system" to "runtime" in the [vendor] section.
The direct dependants are libunwindstack and simpleperf, so it's enough to
link from namespaces containing /system/{lib,lib64,bin}.
Test: Flash and boot
Test: Flash and boot with Runtime APEX enabled (http://r.android.com/q/topic:art-move-libs-to-runtime-apex)
Bug: 123186083
Bug: 113373927
Change-Id: I081aa7392c875202acdaf1185c2ff28e17ac7e76
The ICU .dat file was moved into the runtime APEX file
in commit b6d855f081c232309961f31c7c7c8a76abf79c3c.
There are some apps that know the old location and its
absence causes them to fail.
This change adds a symlink from the old directory to
the new directory. The ICU .dat file changes its name
with every ICU major release so this is simpler than
linking the file itself.
Bug: 119293618
Bug: 120853401
Bug: 122985829
Test: make droid / inspect output
Test: Confirm broken app works on an internal master build
Change-Id: I452dcb5e52975011c9ebd3db2caa621bbefedaf3
Regardless of VNDK version, use template ld.config.txt instead of
using prebuilt ld.config.txt.
Bug: 74658756
Bug: 123209911
Test: PRODUCT_EXTRA_VNDK_VERSIONS=27 m -j vndk_snapshot_package
Change-Id: I0eb527b71e56c555079c524542508a093bf53111
This reverts commit 67a09e5791.
Exempt-From-Owner-Approval: Fixes P0 failures.
Bug: 123185917
Reason for revert: media namespace needs to be introduced.
Change-Id: I0c28798a3143c1e627278c3a908207e670171416
And have the linker translate a java library path from an apex
to a linker namespace.
Bug: 122874359
Test: m, boots, gtest, run-test, CtsJdwpTests
Change-Id: I216c3509c45589d28acdac068aec53877aeb104a
Exempt-From-Owner-Approval: Carrying Jiyong's +2
It depends on libdexfile_external, libnative{bridge,helper,loader} and
libart(d), which are provided by the Runtime APEX.
Test: flash & boot
Test: atest CtsJdwpTestCases
Bug: 113373927
Change-Id: I0df99f444e892c47a5f06bd1bcf5d184defb4517
This will be used for system internals to access
secondary volumes without having to bypass sdcardfs.
This reverts commit 54b8844b13
Bug: 121277410
Test: manual
Change-Id: Id5b995dc5899b5999f1dea662ba1c3ee475a0e46
It's replaced with entries in PRODUCT_PACKAGES_DEBUG in
build/make/target/product/base_system.mk
Test: treehugger
Change-Id: I4dc69c34ddc2c494fc74bc4afee6efa240c9b0d3
This reverts commit 2599088ff6.
Reason: Breaks some 3p apps.
Bug: 122920047
Test: run the app, login.
Change-Id: Idea332b1f91e9d2ac6ebd3879da7820c8ba2284f
*/build.prop files are now loaded much earlier than before; from 'on
post-fs' to the time when the property service is started which is
before init starts the action loop.
This ensures that all processes that are launched by init have a
consistent view of system properties. Previously, the processes that
started before 'on post-fs' were initially with the small number of
sysprops loaded from */default.prop and then suddenly get additional
sysprops from */build.prop while they are executing.
Bug: 122714998
Test: device boots
Change-Id: Ic07528421dfbe8d4f43673cea41175d33cfbf298
This will be used for system internals to access
secondary volumes without having to bypass sdcardfs.
Bug: 121277410
Test: manual
Change-Id: I6546fa8df419157b3c2adcf5ff3faa4db4458cff
Bionic libs, regardless of whether they are bootstrap ones or from the
runtime APEX, are available via /system/lib. Since /system/lib is in the
search paths of the default(platform) namespace, there is no need to
list the bionic libs to the namespace link to the runtime namespace.
Bug: 120266448
Test: m; device boots
Test: atest CtsJniTestCases CtsCompilationTestCases CtsBionicTestCases
all passing except for following tests that are also failing at ToT
dl#exec_linker
dl#exec_linker_load_from_zip
dl#exec_linker_load_self
dl#exec_linker_load_file
Change-Id: Ib67acd4f384b2f0e70b5fe8ec6b45a5506367223
This change makes the bionic libs and the dynamic linker from the
runtime APEX (com.android.runtime) available to all processes started
after apexd finishes activating APEXes.
Specifically, the device has two sets of bionic libs and the dynamic
linker: one in the system partition for pre-apexd processes and another
in the runtime APEX for post-apexd processes. The former is referred as
the 'bootstrap' bionic and are located at
/system/lib/{libc|libdl|libm}.so and /system/bin/linker. The latter is
referred as the 'runtime' bionic and are located at
/apex/com.android.runtime/lib/bionic/{libc|libdl|libm}.so and
/apex/com.android.runtime/bin/linker.
Although the two sets are located in different directories, at runtime,
they are accessed via the same path: /system/lib/* and
/system/bin/linker ... for both pre/post-apexd processes. This is done
by bind-mounting the bootstrap or the runtime bionic to the same path.
Keeping the same path is necessary because there are many modules and
apps that explicitly or implicitly depend on the fact that bionic libs
are located in /system/lib and are loaded into the default linker
namespace (which has /system/lib in its search paths).
Before the apexd is started, init executes a built-in action
'prepare_bootstrap_bionic' that bind-mounts the bootstrap bionic to the
mount points. Processes started during this time are provided with the
bootstrap bionic. Then after the apexd is finished, init executes
another built-in action 'setup_runtime_bionic' which again mounts the
runtime bionic to the same mount points, thus hiding the previous mounts
that target the bootstrap bionic. The mounting of the runtime bionic
(which is only for post-apexd processes) is hidden from pre-apexd
processes by changing propagation type of the mount points to 'private'
and execute the pre-apexd processes with a new mount namespace using
unshare(2). If a pre-apexd process crashes and re-launched after the
apexd is on, the process still gets the bootstrap bionic by unmounting
the runtime bionic which effectively un-hides the previous bind-mounts
targeting the bootstrap bionic.
Bug: 120266448
Test: device boots
Test: cat /proc/`pidof zygote`/mountinfo shows that
/system/lib/{libc|libdl|libm}.so and /system/bin/linker are from the
runtime APEX
Test: cat /proc/'pidof vold`/mountinfo shows that the same mount points
are from system partition.
Change-Id: I7ca67755dc0656c0f0c834ba94bf23ba9b1aca68
For consistency with APKs, signature verification is performed
in the system_server. This includes checking that the signature of
an updated install matches the signature of the active package that
it updates. For this, it requires search access to /data/apex and
read access to the files under that directory.
Test: m
Change-Id: I8795b26b9a40ba7126c2a548fbec82ff322a1453
This commit removes the soname filter from the namespace fallback link
from `runtime` to `system` in the vendor process. This fixes the
problem that vendor process might fail to load `libnetd_client.so`,
`libc_malloc_debug.so`, `libc_malloc_debug_leak.so`, and other libc
dependencies.
This commit also removes the namespace fallback link from `runtime` to
`default` in the vendor process. According to the comments in [1], the
original intention was to allow the access to `/system/${LIB}` not
`/vendor/${LIB}`. Furthermore, `com.android.runtime` suppose to work
without libraries from `/vendor/${LIB}`.
[1] https://android-review.googlesource.com/c/858456
Bug: 119867084
Bug: 122025516 # Motivation of this commit
Test: Executables under vendor partition are not blocked by
`libnetd_client.so` not found error.
Change-Id: I682baada9d755910832474bb3d8307cd49c21ece
This is a workaround to allow us to use libnetd_resolv.so from
the resolver APEX before b/120661824 is fixed.
We cannot put the APEX into the search path due to b/120661824,
but we can put it into the permitted path,
Bug: b/122073006
Test: builds, boots
Test: system/netd/tests/runtests.sh
Change-Id: If6f13ba9dc249d019b820a7c37cf6d4cdd8d0a7d
This reverts commit a0d9f2fd6c.
Original change: Needs to support e.g. app_process in "default" ->
libnativehelper in "runtime" -> platform libs in "default" -> libc etc in "runtime".
Always make sure to switch namespaces when switching library paths between
/system and the APEX, so that internal library dependencies in both
locations are loaded from their own directory. E.g. libc++ and libbase live
in both places, and their dependents must always load the version they were
compiled with.
This CL also adds a temporary workaround to not break hwasan builds
(b/121038155).
Bug: 119867084
Bug: 113373927
Bug: 121038155
Change-Id: I58d09ed091dd82b2162c4a0b51555174d9322e0e
Test: Flash and reboot device
Test: Remount / read-write, then on device: rm -f system/lib{,64}/lib{c,m,dl}.so; system/bin/dex2oat -h; stop && start
Test: mmma bionic/tests/ && adb root && adb shell rm -rf /data/nativetest\* && adb push out/target/product/taimen/data/nativetest* /data/ && adb shell /data/nativetest64/bionic-unit-tests/bionic-unit-tests && adb shell /data/nativetest/bionic-unit-tests/bionic-unit-tests
Test: cts-tradefed run commandAndExit cts-dev -m CtsJniTestCases
Test: cts-tradefed run commandAndExit cts-dev -m CtsCompilationTestCases
Test: cts-tradefed run commandAndExit cts-dev -m CtsBionicTestCases (8 failures remain unchanged by this CL)
Test: Patch internal; lunch taimen_hwasan-userdebug && m SANITIZE_TARGET=hwaddress && vendor/google/tools/flashall -w && adb shell /vendor/bin/sh -c ls
Staging Manager is a high-level service (yet to be committed) that
manages multi-package sessions requiring a reboot to be applied, for
example if one of the packages is an APEX file. This directory will
contain the session data and the temporary copies of the packages.
Bug: 118865310
Test: N/A
Change-Id: I8aceefab849cf5af17086cb6868b801d1c2615e9
This is a workaround to allow us to use libnetd_resolv.so from
the resolver APEX before b/120661824 is fixed.
We cannot put the APEX into the search path due to b/120661824,
but we can put it into the permitted path,
Test: builds, boots
Test: system/netd/tests/runtests.sh
Test: atest FrameworksNetTests android.net.cts.ConnectivityManagerTest
Change-Id: Ia68df860b7edc92180284f62736146e6029d7655
/dev/* nodes referenced in the removed rules are not present on Pixel
devices, i.e. android platform doesn't depend on these nodes. If a
device relies on one of these rules, the rule should be added to the
device-specific ueventd.rc.
v1->v2:
Added back usb-specific rules
/dev/bus/usb/* 0660 root usb
/dev/mtp_usb 0660 root mtp
Bug: 110962171
Test: boot walleye
Test: init_tests
Test: wired headset plays audio
Test: USB PTP works between 2 devices
Change-Id: Ic2d77806a01c8918b2485fb5f0bd9b670b01d1df
The main "base" copy of time zone data is now found in
the runtime module. The system files will likely be deleted.
Test: CTS: run cts -m CtsHostTzDataTests
Test: PTS (cp'd to internal master): run pts -m PtsTimeZoneTestCases
Bug: 116191025
Bug: 119293618
Bug: 113373927
Test: build / boot with logcat inspection
Change-Id: I8dc8ff0d17aac124262d9c7c54abce61d97397e5
Needs to support e.g. app_process in "default" -> libnativehelper in
"runtime" -> platform libs in "default" -> libc etc in "runtime".
Always make sure to switch namespaces when switching library paths between
/system and the APEX, so that internal library dependencies in both
locations are loaded from their own directory. E.g. libc++ and libbase live
in both places, and their dependents must always load the version they were
compiled with.
Bug: 119867084,113373927
Test: Flash and reboot device
Test: Remount / read-write, then on device: rm -f system/lib{,64}/lib{c,m,dl}.so; system/bin/dex2oat -h; stop && start
Test: mmma bionic/tests/ && adb root && adb shell rm -rf /data/nativetest\* && adb push out/target/product/taimen/data/nativetest* /data/ && adb shell /data/nativetest64/bionic-unit-tests/bionic-unit-tests && adb shell /data/nativetest/bionic-unit-tests/bionic-unit-tests
Test: cts-tradefed run commandAndExit cts -m CtsJniTestCases
Change-Id: I6c4fc2f1abea1fb8851546e258ffaaa4ef6fe7d0
This reverts commit 2f56b1fff8.
Reason for revert: Breaks bionic-unit-tests's dlfcn.dladdr_libc
and x86 CtsJniTestCases' JniStaticTest.test_linker_namespaces.
Bug: 113373927
Bug: 120661824
Change-Id: I9b34bcb240a42bf99c6d8b58db4b18a4f6d36961
This reverts commit d3b0b2708b.
Reason for revert: Regression in USB audio handling
Test: USB audio playback on Crosshatch
Bug: 120795549
Change-Id: Ibd05cd9b419f3e7988ce24a45f800d4bfe91ef6a
/dev/* nodes referenced in the removed rules are not present on Pixel
devices, i.e. android platform doesn't depend on these nodes. If a
device relies on one of these rules, the rule should be added to the
device-specific ueventd.rc.
Bug: 110962171
Test: boot walleye
Test: init_tests
Change-Id: I3262475d4ff22386e8da0436efaf98b208e4fa1c
Some configurations won't allow ueventd to have CAP_NET_ADMIN, so the
new default size of 16M is not possible for those. Those
configurations also won't need such a large buffer size, so this
change allows devices to customize the SO_RCVBUF(FORCE) size for the
uevent socket.
This is done by adding the line 'uevent_socket_rcvbuf_size <size>' to
your device's ueventd.rc file. <size> is specified as a byte count,
for example '16M' is 16MiB.
The last parsed uevent_socket_rcvbuf_size line is the one that is
used.
Bug: 120485624
Test: boot sailfish
Test: ueventd unit tests
Change-Id: If8123b92ca8a9b089ad50318caada2f21bc94707
A symlink for TARGET_ROOT_OUT as a post install command of a package
that is also installed to TARGET_ROOT_OUT. We hijack init.rc which
satisfies this requirement for this symlink.
Bug: 120402274
Bug: 120460755
Bug: 120509320
Bug: 120554662
Test: symlink is created
Test: make bootimage && ls -la $OUT/root/init
Change-Id: I6f1ac06ef152c36d7d7db4618d49a008338da39b
netd will use apex/com.android.resolv/lib64/libned_resolv.so to replace
system/lib64/libned_resolv.so.
note:Without disabling selinux, we setenv LD_LIBRARY_PATH in netd.rc but
netd couldn't use libnetd_resolv.so under com.android.resolv/lib64 because
LD_LIBRARY_PATH is ignored when AT_SECURE is on. Directly add path to the
libnetd_resolv apex to /system/etc/ld.config.txt for temporarily.
Bug: 119527674
Test: make; flash; lsof -p $(pidof netd)
Change-Id: I011d2da625151bf43c10497bb84c15f3d8e6ad33
This change adds an ANDROID_RUNTIME_ROOT environment variable
to indicate the root of the Android runtime. This can be
used in place of ANDROID_SYSTEM to locate files when they
move inside the runtime APEX.
Bug: 119935277
Test: build / boot
Change-Id: Ic3b1ae3e3c98eea7d7c59e514ce62994679ab7b7
Non-treblized devices use ld.config.legacy.txt, which does not
support product partition, leading to access denial from/to product partition.
Declare directly /product since search paths are resolved in linker config.
Test: m -j with non-treblized device upgraded to P.
Change-Id: Ic142b807f5dbffdfa5c774b3df8d0903b9626b6a
Currently /dev/uinput is owned by system/bluetooth.
But that's inconsistent with some of the sepolicies for uhid_device.
This also means that the new native tests for inputflinger aren't able
to execute properly, because they require the ability to register a new
input device via uinput.
Bug: none
Test: atest inputflinger_test
The newly added EventHub_test is still under review
Change-Id: I53524738db1a5d3ba962b9bec35ef322ed3028f2
Test: Device boot test with Android Runtime APEX.
Test: Device boot test without Android Runtime APEX.
Bug: 113373927
Change-Id: Iff32fcd79a667b07df839f4e6ef2cdb3cf70e9d3
This change adds a command to init.rc to write cpu variant information to a file under dev/
Test: sync to device and make sure corresponding files are created.
Change-Id: Ibf90967f13f72af925c82ff79bd973ef4cdc4068
Init now parses *.rc files from the APEXs when the apexd notifies the
mount event via apexd.status sysprop.
Bug: 117403679
Test: m apex.test; adb root; adb push <builtfile> /data/apex; adb reboot
adb root; adb shell setprop ctl.start apex.test; dmesg shows that init
tries to start the service which doesn't exist.
[ 47.979657] init: Could not ctl.start for 'apex.test': Cannot find '/apex/com.android.example.apex/bin/test': No such file or directory
Change-Id: I3f12355346eeb212eca4de85b6b73257283fa054
This directory is used for preloads that are typically placed in
the system_other image and copied to /data on first boot if the
cppreopts script is installed.
Bug: 80508492
Test: make
Change-Id: I4121b07ee2fc96d533075d1907557de7e4be4ee0
Since the build system move to kati/ninja, build command is an
implicit dependency of a target. This makes the bcp_dep / bcp_md5
thing obsolete.
Test: make
Change-Id: I4ce9ebdabfc72b188e49f12888054d63b3cda64d
Now that we mount partitions early, services can be started before the
'fs' trigger. We therefore start the service managers as early as
possible to ensure their transports are online, without device
specific rc files needing to handle that. We also start logd even
one step earlier to ensure that we capture all possible logd.
Bug: 89689596
Test: logging works for early services, include the servicemanagers
Change-Id: I75dbfcd26eb6fa77f002de10afd00f085c93aa07
This causes adds a call the fucntion to decrement the
checkpoint's retry count as soon as service manager is
available.
Test: vdc setCheckpoint 2 then reboot 3 times checking state
Bug: 112901762
Change-Id: Ie0a78b1eb05b340718e76175509d1ebefae68017
APEX filesystem images will now be mounted in /apex.
Also, make sure /data/apex is created with the right ACL.
Bug: 112455435
Test: flash and wipe, /apex is mounted as tmpfs, /data/apex is created
Change-Id: Ie27775e9f40a27b510272f212762624a04e94f1d
We're moving apps and their libs to product_services for older
devices too, so mimic the rules in the default ld.config related
to product_services.
Also fix a one-off disparity between /product and /product_services
in ld.config.txt.
Bug: 114804489
Test: m out/target/product/marlin/system/etc/ld.config.vndk_lite
Change-Id: I166275c035c85b4d69cff8e9d51af3d6d0ff4857
A few places had /product and /product_services hardcoded. Update
them to use values that get set at build time.
Bug: 114804489
Test: m out/target/product/marlin/system/etc/ld.config.vndk_lite.txt
Change-Id: Ie48dbb2453ae941c1b5ee57f092d12a5497d878f
This reverts commit bd2b0c78a1.
Reason for revert:
Solved the build error on mac_sdk build by using python2
Bug: 112738739
Bug: 111417344
Test: make ld.config.txt
Change-Id: Ic5a3ed2e6b091813c0310f859b7d20935514a7c6
This reverts commit 15bac6bdaf.
Reason for revert:
This caused build errors in mac_sdk build.
Seems that our mac builders do not have python3.
env: python3: No such file or directory
Bug: 112738739
Bug: 111417344
Test: presubmit
Change-Id: I9796f2e9a54a66fc7a4e1c780c8c272b98ed437f
The ld.config.txt file is a template to be used for current build as
well as for the VNDK snapshots for old vendor partitions.
To work with the old Android vendor partitions, the ld.config.txt
template must be backward compatible.
This script checks if the current ld.config.txt template modifies or
deletes the vendor directores in every section. If the change is
detected, it will report a build error.
Bug: 112738739
Bug: 111417344
Test: make ld.config.txt
Change-Id: I1211696d6a00a37d531d40c894f1d7e64b210ae5
Currently zygote is started before loading persistent properties which
stops ART honor experiment flags planned landed as persistent
properties.
The original motivation is we would like zygote be started as early as
possible and loading persistent properties taking time, but after fix of
b/64392887 loading persist properties is now only taking 3ms on P18, 6ms
on P16 respectively.
Bug: 114044733
Test: Boot
Change-Id: Ibc118966e975c741ee8ea47091b14d691692bf2c
Because the original modification (restart SF which is added
for display bootanimation) from O to P causes bootanimation NPE,
we remove the part of restart SF and add other flow to show
bootanimation.
Test: manual, ran the test 10 times and it cause no NPE and
display BootAnimation after decrypt
Test: boot aosp_sailfish
Bug: 79547653
Change-Id: I355ccdbb2e2f27d897e2e0ee00f9300ef38ede03
Attempting to reduce the number of different spellings we have for
"product services" partition in the codebase.
Bug: 112431447
Test: m
Change-Id: I1a87d7e040a8b1f91f973ac7d90d6360b5b54f71
Merged-In: I1a87d7e040a8b1f91f973ac7d90d6360b5b54f71
Bug: 112780007
Test: Build with other changes in the topic (aosp_taimen-userdebug).
Test: Boot into recovery. Verify basic functionalities (`adb shell` and
`adb sideload`, factory reset).
Change-Id: I8686bbc68c9c8a1570289ecd21bcfcb551d1700c
Treehugger Robot