Bug: 64848081
Test: built and successfully booted again
Merged-In: I93c899249bf2cc5ab8d880c0eaff471518e73121
Change-Id: I93c899249bf2cc5ab8d880c0eaff471518e73121
Currently, init attempts to set ro.boottime.<service> properties
whenever a service starts, however since these properties are ro. this
means that an error is printed whenever a service is restarted.
Since these properties are intended for reporting boottime, these
subsequent writes during restarts are erroneous and therefore this
change stops attempting to write them, thus silencing the error.
Test: boot bullhead, restart processes, observe no error print
Change-Id: I372f8d5c26590fc0661b92f632410e23e6418841
1) Check subsystems list before doing usb subsystem logic. This allows
developers to handle usb* subsystems in ueventd.rc files.
2) Fix a bug where each subsystem_ instance is not reinitialized, but
rather only the name_ member was set.
Test: boot bullhead
Test: check that multiple uevent_devname subsystems work when
specified in ueventd.rc
Change-Id: Ifcac04763afcaf72a3b14ef5f3a6cb89981b51a1
Test: boot bullhead
Test: Introduce LOG(FATAL) at various points of init and ensure that
it reboots to the bootloader successfully
Test: Introduce LOG(FATAL) during DoReboot() and ensure that it reboots
instead of recursing infinitely
Test: Ensure that fatal signals reboot to bootloader
Change-Id: I409005b6fab379df2d635e3e33d2df48a1a97df3
We currently throw out the return values from builtin functions and
occasionally log errors with no supporting context. This change uses
the newly introduced Result<T> class to communicate a successful result
or an error back to callers in order to print an error with clear
context when a builtin fails.
Example:
init: Command 'write /sys/class/leds/vibrator/trigger transient' action=init (/init.rc:245) took 0ms and failed: Unable to write to file '/sys/class/leds/vibrator/trigger': open() failed: No such file or directory
Test: boot bullhead
Merged-In: Idc18f331d2d646629c6093c1e0f2996cf9b42aec
Change-Id: Idc18f331d2d646629c6093c1e0f2996cf9b42aec
init tries to propagate error information up to build context before
logging errors. This is a good thing, however too often init has the
overly verbose paradigm for error handling, below:
bool CalculateResult(const T& input, U* output, std::string* err)
bool CalculateAndUseResult(const T& input, std::string* err) {
U output;
std::string calculate_result_err;
if (!CalculateResult(input, &output, &calculate_result_err)) {
*err = "CalculateResult " + input + " failed: " +
calculate_result_err;
return false;
}
UseResult(output);
return true;
}
Even more common are functions that return only true/false but also
require passing a std::string* err in order to see the error message.
This change introduces a Result<T> that is use to either hold a
successful return value of type T or to hold an error message as a
std::string. If the functional only returns success or a failure with
an error message, Result<Success> may be used. The classes Error and
ErrnoError are used to indicate a failed Result<T>.
A successful Result<T> is constructed implicitly from any type that
can be implicitly converted to T or from the constructor arguments for
T. This allows you to return a type T directly from a function that
returns Result<T>.
Error and ErrnoError are used to construct a Result<T> has
failed. Each of these classes take an ostream as an input and are
implicitly cast to a Result<T> containing that failure. ErrnoError()
additionally appends ": " + strerror(errno) to the end of the failure
string to aid in interacting with C APIs.
The end result is that the above code snippet is turned into the much
clearer example below:
Result<U> CalculateResult(const T& input);
Result<Success> CalculateAndUseResult(const T& input) {
auto output = CalculateResult(input);
if (!output) {
return Error() << "CalculateResult " << input << " failed: "
<< output.error();
}
UseResult(*output);
return Success();
}
This change also makes this conversion for some of the util.cpp
functions that used the old paradigm.
Test: boot bullhead, init unit tests
Merged-In: I1e7d3a8820a79362245041251057fbeed2f7979b
Change-Id: I1e7d3a8820a79362245041251057fbeed2f7979b
This change splits out the selinux initialization and supporting
functionality into selinux.cpp and splits the security related
initialization of the rng, etc to security.cpp. It also provides
additional documentation for SEPolicy loading as this has been
requested by some teams.
It additionally cleans up sehandle and sehandle_prop. The former is
static within selinux.cpp and new wrapper functions are created around
selabel_lookup*() to better serve the users. The latter is moved to
property_service.cpp as it is isolated to that file for its usage.
Test: boot bullhead
Merged-In: Idc95d493cebc681fbe686b5160502f36af149f60
Change-Id: Idc95d493cebc681fbe686b5160502f36af149f60
(cherry picked from commit 9afb86b25d8675927cb37c86119a7ecf19f74819)
We currently throw out the return values from builtin functions and
occasionally log errors with no supporting context. This change uses
the newly introduced Result<T> class to communicate a successful result
or an error back to callers in order to print an error with clear
context when a builtin fails.
Example:
init: Command 'write /sys/class/leds/vibrator/trigger transient' action=init (/init.rc:245) took 0ms and failed: Unable to write to file '/sys/class/leds/vibrator/trigger': open() failed: No such file or directory
Test: boot bullhead
Change-Id: Idc18f331d2d646629c6093c1e0f2996cf9b42aec
init tries to propagate error information up to build context before
logging errors. This is a good thing, however too often init has the
overly verbose paradigm for error handling, below:
bool CalculateResult(const T& input, U* output, std::string* err)
bool CalculateAndUseResult(const T& input, std::string* err) {
U output;
std::string calculate_result_err;
if (!CalculateResult(input, &output, &calculate_result_err)) {
*err = "CalculateResult " + input + " failed: " +
calculate_result_err;
return false;
}
UseResult(output);
return true;
}
Even more common are functions that return only true/false but also
require passing a std::string* err in order to see the error message.
This change introduces a Result<T> that is use to either hold a
successful return value of type T or to hold an error message as a
std::string. If the functional only returns success or a failure with
an error message, Result<Success> may be used. The classes Error and
ErrnoError are used to indicate a failed Result<T>.
A successful Result<T> is constructed implicitly from any type that
can be implicitly converted to T or from the constructor arguments for
T. This allows you to return a type T directly from a function that
returns Result<T>.
Error and ErrnoError are used to construct a Result<T> has
failed. Each of these classes take an ostream as an input and are
implicitly cast to a Result<T> containing that failure. ErrnoError()
additionally appends ": " + strerror(errno) to the end of the failure
string to aid in interacting with C APIs.
The end result is that the above code snippet is turned into the much
clearer example below:
Result<U> CalculateResult(const T& input);
Result<Success> CalculateAndUseResult(const T& input) {
auto output = CalculateResult(input);
if (!output) {
return Error() << "CalculateResult " << input << " failed: "
<< output.error();
}
UseResult(*output);
return Success();
}
This change also makes this conversion for some of the util.cpp
functions that used the old paradigm.
Test: boot bullhead, init unit tests
Change-Id: I1e7d3a8820a79362245041251057fbeed2f7979b
This change splits out the selinux initialization and supporting
functionality into selinux.cpp and splits the security related
initialization of the rng, etc to security.cpp. It also provides
additional documentation for SEPolicy loading as this has been
requested by some teams.
It additionally cleans up sehandle and sehandle_prop. The former is
static within selinux.cpp and new wrapper functions are created around
selabel_lookup*() to better serve the users. The latter is moved to
property_service.cpp as it is isolated to that file for its usage.
Test: boot bullhead
Merged-In: Idc95d493cebc681fbe686b5160502f36af149f60
Change-Id: Idc95d493cebc681fbe686b5160502f36af149f60
This change splits out the selinux initialization and supporting
functionality into selinux.cpp and splits the security related
initialization of the rng, etc to security.cpp. It also provides
additional documentation for SEPolicy loading as this has been
requested by some teams.
It additionally cleans up sehandle and sehandle_prop. The former is
static within selinux.cpp and new wrapper functions are created around
selabel_lookup*() to better serve the users. The latter is moved to
property_service.cpp as it is isolated to that file for its usage.
Test: boot bullhead
Merged-In: Idc95d493cebc681fbe686b5160502f36af149f60
Change-Id: Idc95d493cebc681fbe686b5160502f36af149f60
(cherry picked from commit 9afb86b25d8675927cb37c86119a7ecf19f74819)
Inspired by ag/2659809/, this CL add readahead built-in command in init
to let files be prefetched into pagecache for faster reading.
Readahead happens in background but due to filesystem limitation it
might take small amount of time in it reading the filesystem metadata
needed to locate the requested blocks. So the command is executed in a
forked process to not block init execution.
Bug: 62413151
Test: boottime, dumpcache
Change-Id: I56c86e2ebc20efda4aa509e6efb736bd1d92baa5
service.cpp, which is part of libinit, references symbols in
property_service.cpp, which causes the linker to complain when linking
libinit.a in some situations.
Therefore, we move property_service.cpp to libinit.
Separately, this will make it easier to write tests for
property_service.cpp, which we will want to do in the future.
Test: build, init unit tests
Change-Id: If1cffa8510b97e9436efed3c8ea0724272383eba
The shared libselinux library does not export all of the symbols that
we use in init and the linker is now complaining about this, so let's
use the static libselinux library in init_tests to match init itself.
Test: build, init unit tests
Change-Id: I9011a959a7c49446b3529740e606140a4ee8c32d
selabel_lookup() must be threadsafe, but had failed in the past.
Bug: 63861738
Test: this newly added test
Change-Id: I78bdb8e555433e8217ac6d4be112ba91de9f03bb
Andreas Huber