- Deal with a missing initializer issue
- Deal with some -Wunused issues
- Deal with some signed/unsigned issues
- switch to usleep from sleep to facilitate win_sdk compile
Change-Id: I64e32a5b0782aeed9582f489e866173c4df1afbf
This changes allows overriding the fs-type and size that
are normally returned by the booloader.
This is in preparation for supporting other FSes.
Change-Id: I8d141a0d4d14df9fe84d3b131484e9696fcd8870
Signed-off-by: JP Abgrall <jpa@google.com>
Formatting large partitions on devices with small transfer buffers did
not work before since format used a strange path through the code to
send data. It now uses the normal path. Also cleaned up a bit. FS
code now lives in a separate file and the custom path for format is
gone.
Change-Id: If4e01cabc2e250b7c02ca7ce8c268e51d49e1529
(Linux only for now) With fastboot reading serial numbers from sysfs, it had
become possible for a fastboot command issued immediately after rebooting
the bootloader to fail, because sysfs still thought the device was online.
To prevent this, after reboot-bootloader we wait for the device to disconnect.
Also made usb_read and usb_write fail immediately if the descriptor has been
closed; this prevents an incorrect error message ("Bad file descriptor")
when errors from fb_getvar are ignored (e.g., by fb_format_supported).
Also removed unused fd param from filter_usb_device, and simplified logic
in usb_write by using do/while instead of a special case for len == 0.
Change-Id: I799b857eab411fd8ad25f5777fc61c685152ea86
The version of MINGW we compile with has more advanced POSIX support.
Removing legacy MINGW workarounds as those are not needed anymore.
Change-Id: Id5d67176b719db6c3667be6d63c41432e0ba9f30
Signed-off-by: Rom Lemarchand <romlem@google.com>
Without the partition name, the bootloader would have to store all
of the data until the next flash command, which potentially wastes
time.
To help the bootloader deal with the data more efficiently, we now
issue a flashing hint ("preflash:%s", partname).
"preflash:" is used to indicate that the following download
should ignore any previous "preflash:%s".
Bug: 6045918
Change-Id: I4e9708f64f28a4781bde14eb3714d36b281ec5be
The removal of extra headers from ext4_utils.h removed an indirect
include of errno.h that breaks building with USE_MINGW=1.
Change-Id: Ic8448db97b5c056a139dc836e1d6f3aaafb917c9
Switch fastboot to use an exported api from libext4_utils that
will change less often, and remove some of the implementation
details from fastboot.
Change-Id: I85a10c8f58abe8093d0c781e1a0e100c348ef0d9
To prevent false error reports from e2fsck, update fastboot to erase
a partition identified as being ext4 partition before flashing an image
to it.
bug: 7259359
Change-Id: I85e9963aa8247b4b33fdd57f994cdb3ee72b670f
Add support to fastboot for automatically using libsparse to break large
files, whether they are in sparse or normal format, into multiple sparse
files that can each fit into the target's memory. Allows flashing
images that are larger than the size of the available memory on the
target.
By default, any file over 512MB will be sparsed into 512MB chunks. The
limit can be modified with the -m argument, or sparsing can be forced
with -S or avoided with -N. If -m is not specified, the target can
override the default by implementing getvar:max-download-size
Change-Id: I6c59381c3d24475c4f2587ea877200b96971cbd7
If the bootloader doesn't support formatting of those partitions
(either because it doesn't support the getvar commands needed or
the partition type is not supported), the errors are printed but
doesn't halt processing of subsequent commands.
Change-Id: I816ac2e5e7593846fcb4fd39c793a8dbdd996f6f
Signed-off-by: Mike J. Chen <mjchen@google.com>
For manufacturing and testing, there is a need to talk to
whatever device is connected to a given port on the host. This
change modifies fastboot's "-s" option to take either a serial
number or a device path. The device paths of the connected
devices can be listed using "fastboot -l devices" whose output
will resemble:
016B75D60A00600D usb:2-5 fastboot
AD3C12020173 usb:1-4.3 fastboot
The second column lists the device paths. If the -l option is
not given, the output from "fastboot devices" will be the same as
it used to be (i.e. the paths will not be printed).
Finally, note that the format of the device paths are platform
dependent. The example above is from Linux. On OS-X, the paths
will be "usb:" followed by hex digits. For Windows, the device
paths will be printed as "????????????" and the -s option will
not be able to select a device until someone implements the
underlying functionality in usb_windows.c.
Change-Id: I1f01b8f47acd32edb0ac18db107316a2c923bbde
Signed-off-by: Scott Anderson <saa@android.com>
There were some changes to make_ext4fs to add SELinux context. Also, we
changed the "android" argument to an fs_config_func that allows you to
customize the permissions put into a ext4 filesystem.
Change-Id: If23152c40659122a91771fcbd094f713b38e321e
Some filesystems (e.g. ext4) require flushing an initial
fs image, right after erasing it the partition is unusable.
Doing erase,flush emptyfs is a little bit scaring so we have a
separate command that performs it as atomic step:
- get size of partition
- create an empty filesystem image
- erase the partition
- flush empty fs to the partition
This command applicable only for ext4 filesystem and checks the
partition type before formatting it.
Change-Id: I8529bc3485739487f0d91312f7c0ab1a6e5d8b44
fastboot: Change -w to format after the erase of userdata & cache
If the bootloader doesn't support formatting of those partitions
(either because it doesn't support the getvar commands needed or
the partition type is not supported), the errors are printed but
doesn't halt processing of subsequent commands.
Change-Id: I816ac2e5e7593846fcb4fd39c793a8dbdd996f6f
Signed-off-by: Mike J. Chen <mjchen@google.com>
Some filesystems (e.g. ext4) require flushing an initial
fs image, right after erasing it the partition is unusable.
Doing erase,flush emptyfs is a little bit scaring so we have a
separate command that performs it as atomic step:
- get size of partition
- create an empty filesystem image
- erase the partition
- flush empty fs to the partition
This command applicable only for ext4 filesystem and checks the
partition type before formatting it.
Change-Id: Ifa42deaa66c3cb96ff786a73c3fadad92658f395
Some filesystems (e.g. ext4) require flushing an initial
fs image, right after erasing it the partition is unusable.
Doing erase,flush emptyfs is a little bit scaring so we have a
separate command that performs it as atomic step:
- get size of partition
- create an empty filesystem image
- erase the partition
- flush empty fs to the partition
This command applicable only for ext4 filesystem and checks the
partition type before formatting it.
Change-Id: I8529bc1dc64237f1f0d91312f7c0ab1a6e5d8b44
Some filesystems (e.g. ext4) require flushing an initial
fs image, right after erasing it the partition is unusable.
Doing erase,flush emptyfs is a little bit scaring so we have a
separate command that performs it as atomic step:
- get size of partition
- create an empty filesystem image
- erase the partition
- flush empty fs to the partition
This command applicable only for ext4 filesystem and checks the
partition type before formatting it.
Change-Id: I8529bc1dc64698f1f0d91312f7c0ab1a6e5d8b44
Some filesystems (e.g. ext4) require flushing an initial
fs image, right after erasing it the partition is unusable.
Doing erase,flush emptyfs is a little bit scaring so we have a
separate command that performs it as atomic step:
- get size of partition
- create an empty filesystem image
- erase the partition
- flush empty fs to the partition
This command applicable only for ext4 filesystem and checks the
partition type before formatting it.
Change-Id: I8529bc1dc64698f1f0d91312f7c0ab1a6e5d8b44
This is needed for products like xoom-cdma and xoom-cdma-lte.
The xoom-cdma-lte product requires an lte baseband binary but
it's not needed for xoom-cdma.
This is implemented by allowing an optional product parameter
to "required" statements. The parameter is separated from
"required" by a colon so the version-baseband-2 requirment in
board-info.txt for stingray becomes:
require-for-product:xoom-cdma-lte version-baseband-2=ltedc_u_03.25.00|ltedc_u_03.19.00
In the above statement, only xoom-cdma-lte requires version-baseband-2
and the baseband can be lte_u_03.25.00 or lte_u_03.19.00. For other
products version-baseband-2 will be ignored.
Change-Id: I786bec5f5661c2243d87925b064fc6124d3cffa1
Merge commit 'beb72464ff8c501597cd7e098090f7d131dc5ccb'
* commit 'beb72464ff8c501597cd7e098090f7d131dc5ccb':
fastboot: make it so I can actually see the bootloader chatter
- prefix bootloader messages with (bootloader)
- remove the fancy right justified no newline business
Change-Id: Ica16ebe6a25971db423c5db06300a280d93faf3e
Signed-off-by: Brian Swetland <swetland@google.com>
When using fastboot in scripts, it currently is necessary to parse the
output for FAILED messages and possible other indications of
error. This happens relatively often, for example when there are radio
update issues. Fortunately, fb_execute_queue already has a notion that
an error has occured which is used to abort the queue execution.
This change makes the status value be returned from fb_execute_queue
to main which can then return it as an exit status. usage cases were
also changed to return 1.
Note the code already returned 1 for error in one other case when
there was a problem with boot, so there is a precedent for return 1 on
error in this program.
Change-Id: Ib0463b08c8f2569495e248dd84e331f7e3691039
Mark Salyzyn