- look in /vendor/firmware/... in addition to /system/etc/firmware/... for firmware loading
- add /vendor/bin to path before /system/bin
- add /vendor/lib to ldpath before /system/lib
- configure appropriate permissions for /system/vendor/bin
- symlink /vendor -> /system/vendor
Change-Id: I0c06ca1e38a44f0c7024cee6cea8907aa93a4532
Merge commit '49b8124a1759cb8b27e0c21a1a5a54b8a81bdb19'
* commit '49b8124a1759cb8b27e0c21a1a5a54b8a81bdb19':
Use makedev helper for device major and minor numbers
Merge commit '17dcc5c57dcffb919f3de65ff7a0134ffa3bd874' into gingerbread-plus-aosp
* commit '17dcc5c57dcffb919f3de65ff7a0134ffa3bd874':
Use makedev helper for device major and minor numbers
Major and minor numbers can be greater than 255. Major numbers
are 12 bits, and minor numbers are 20 bits. Supporting major
and minor numbers > 255 allows the use of the extended block
device for extra mmc partitions.
Change-Id: I4c42bfe0781069e8e4cb13ebe26e860cdc03f866
Since we now support USB host mode, devices might get a different device
file depending if other devices are connected on the host port. This
patch creates symlinks to USB character devices that depend on the port
devices are connected to, but not on the order they have been probed.
(e.g. /dev/usb/tty2-1:1.0 -> /dev/ttyUSB0)
Change-Id: I285bcc2d59446fbff8a7abbe39c21781f3bb4bd3
Merge commit 'fad7204e9eac20a87afacd7547ed8202a39319f8' into gingerbread-plus-aosp
* commit 'fad7204e9eac20a87afacd7547ed8202a39319f8':
validate the source of uevent messages
Merge commit '742150c031756da1393bf4223b2468b17cb79326'
* commit '742150c031756da1393bf4223b2468b17cb79326':
Use complete hardware name without spaces.
Merge commit '62a54f3b1343043528b7e93c1a4311a5e9d5f358'
* commit '62a54f3b1343043528b7e93c1a4311a5e9d5f358':
init: use tmpfs/ftruncate for properties backing store instead of ashmem
This removes the need for ashmem for early bringup and avoids an issue
with permissions enforcement.
Change-Id: I405b080660934d73048c79d614b6b2ebc43ab182
Signed-off-by: Brian Swetland <swetland@google.com>
init now creates files in /dev/bus/usb/ for user access to USB devices.
Files are chmod 660 with group AID_USB.
Signed-off-by: Mike Lockwood <lockwood@android.com>
init now creates files in /dev/bus/usb/ for user access to USB devices.
Files are chmod 660 with group AID_USB.
Signed-off-by: Mike Lockwood <lockwood@android.com>
make doesn't seem to handle the absolute symlink from
$OUT/root/sbin/ueventd to /init well - it follows the link during
dependency resolution, decides $OUT/root/sbin/ueventd doesn't exist
because /init doesn't exist, and relinks it every time.
Change-Id: I9ca1c14fe5fa80634f51ffc51a7c73146d29d42e
When the init process ran out of actions to execute, cur_action was
NULL and action_queue_empty() was true, but cur_command was still
set. This patch clears cur_command when a new action is retreived,
and only depends on cur_action and action_queue_empty() to determine
the poll timeout.
Change-Id: Iaa95063c8c267a5b1ada9f20363b99c433e61ac4
If any child processes exit before signal_init, they won't get reaped
unless another child process exits after signal_init. Calling
handle_signal from signal_init forces them to be reaped immediately.
Change-Id: I459cfbfe6cf00f29454c62a8c840baf21cb1fb03
eMMC block device names may change based on the detection order of
the eMMC device and any other SD bus devices, such as a removable SD
card.
This patch adds support to init for:
* Symlinks to block devices. When a block device uevent is
processed, if it starts with "/devices/platform", the platform
driver name is parsed out, and symlinks to the block device are
created in /dev/block/platform/<platform driver>/
* Symlinks based on partition name and number. If the uevent for
a block device contains information on the partition name or
number, symlinks are created under
/dev/block/platform/<platform driver>/by-num/p<partition>
and
/dev/block/platform/<platform driver>/by-name/<partition name>
init.rc can then use a device path like the following to mount an
eMMC device:
/dev/block/platform/<platform>/by-name/system /system ro
Change-Id: Id11bb7cdf1e2ada7752a5bd671cbf87237b34ae2
Devices with non-MTD storage need to override the filesystem mounting
commands in init.rc. Moving them to a new "fs" init level allows a
custom init.<device>.rc to handle the mounting.
Change-Id: If0e655139b9734650fb798b6eb0a90e2241fc29b
Merge commit '1404c27bff1499dae9b640870ce2251d78cdc5ef' into eclair-plus-aosp
* commit '1404c27bff1499dae9b640870ce2251d78cdc5ef':
system/core/init: set proper permissions for tpa2018d1 (CDMA)
Brian Swetland