This CL fixes the design problem of the previous mechanism for providing
the bootstrap bionic and the runtime bionic to the same path.
Previously, bootstrap bionic was self-bind-mounted; i.e.
/system/bin/libc.so is bind-mounted to itself. And the runtime bionic
was bind-mounted on top of the bootstrap bionic. This has not only caused
problems like `adb sync` not working(b/122737045), but also is quite
difficult to understand due to the double-and-self mounting.
This is the new design:
Most importantly, these four are all distinct:
1) bootstrap bionic (/system/lib/bootstrap/libc.so)
2) runtime bionic (/apex/com.android.runtime/lib/bionic/libc.so)
3) mount point for 1) and 2) (/bionic/lib/libc.so)
4) symlink for 3) (/system/lib/libc.so -> /bionic/lib/libc.so)
Inside the mount namespace of the pre-apexd processes, 1) is
bind-mounted to 3). Likewise, inside the mount namespace of the
post-apexd processes, 2) is bind-mounted to 3). In other words, there is
no self-mount, and no double-mount.
Another change is that mount points are under /bionic and the legacy
paths become symlinks to the mount points. This is to make sure that
there is no bind mounts under /system, which is breaking some apps.
Finally, code for creating mount namespaces, mounting bionic, etc are
refactored to mount_namespace.cpp
Bug: 120266448
Bug: 123275379
Test: m, device boots, adb sync/push/pull works,
especially with following paths:
/bionic/lib64/libc.so
/bionic/bin/linker64
/system/lib64/bootstrap/libc.so
/system/bin/bootstrap/linker64
Change-Id: Icdfbdcc1efca540ac854d4df79e07ee61fca559f
A symlink for TARGET_ROOT_OUT as a post install command of a package
that is also installed to TARGET_ROOT_OUT. We hijack init.rc which
satisfies this requirement for this symlink.
Bug: 120402274
Bug: 120460755
Bug: 120509320
Bug: 120554662
Test: symlink is created
Test: make bootimage && ls -la $OUT/root/init
Change-Id: I6f1ac06ef152c36d7d7db4618d49a008338da39b
Even though it isn't strictly needed when not system-as-root, for
backwards compatibility, it is desired to keep this symlink.
Bug: 119851742
Test: tree-hugger
Change-Id: I47bc25ab257336f56ef09b5db6ebaf6b17daad35
This CL also adds namespace android::fs_mgr and remove FsManager* prefix
for class names. Note that android::fs_mgr::FsManagerAvbOps will be removed
in later CLs when fs_mgr doesn't rely on libavb->avb_slot_verify() to
parse vbmeta structs.
Some lingering sources for by_name_symlink_map_ are also removed.
Bug: 112103720
Test: boot crosshatch_mainline-userdebug
Change-Id: I2d1a5cc39bcd5a699da8d5539f191d8c7737c4af
init doesn't cooperate with execute-only memory just yet, so disable it
until we can determine the root cause.
Bug: 77958880
Test: Device boots.
Change-Id: Ieb78315ba1e48c9cd0d047a42951bd3fbd36641b
The first split of 1st/2nd stage init went a bit overboard, since it
split these even in the case of the recovery image and system-as-root,
which don't actually need the split. This change simplifies this a
bit:
system-as-root and recovery have a single combined /system/bin/init
and a symlink from /init to it.
non-system-as-root has a separate first stage init at /init on the
first stage ramdisk and a combined /system/bin/init on system.img.
Two particular benefits from this:
1) Removal of the rsync of TARGET_RAMDISK_OUT to the recovery image
2) Decrease of overall space on the recovery image since it won't have
a statically linked first stage init
This also unified the various entry points of init to depend entirely
on the arguments passed to it, instead of the hybrid of arguments and
environment variable used previously.
Bug: 80395578
Test: boot both system-as-root and non-system-as-root
Change-Id: Ic2f29b6f56b7defc80eaa0e7cd0c9107e978816f
Current hwasan implementation breaks when stderr (fd 2) is missing.
Bug: 118776698
Test: hwasan boots without serial console
Change-Id: Id095a87212096526a497563adab3d7f2f9fe8ab0
The file-based encryption setup code is being refactored into its own
library because it applies to both ext4 and f2fs, not just ext4. Update
init to use the new location. For fs_mgr, just remove the include of
ext4_crypt_init_extensions.h since it was unneeded.
Test: built, booted device with f2fs encryption
Change-Id: I392a763e3349f001bdbc09eb9ca975aa3451fd68
With system-as-root, both first and second stage init belong to
system, but without system-as-root, first stage belongs to vendor and
second stage belongs to system. This change creates two phony
packages to achieve this correctly in the build system.
Bug: 117606184
Test: mainline builds work properly
Change-Id: I19263e76c217c2e70bc06c180be3a460e9144f18
This makes the init module only produce artifacts in
/system. A simultaneous change in the core product
makefiles explicitly adds init_second_stage.recovery.
Bug: 112318375
Test: lunch mainline_arm64 && m nothing
Change-Id: I33f0f0c869dfb1ffe781fc682eeb20589a4ffe90
In the future, systems with dm-linear will require a ramdisk to set up
the mount for system. In this world, first stage init will be a part
of this ramdisk and handle setting up dm-linear, mounting the
necessary partitions, then pivoting to the system image, which will
become the root partition.
This also enables previous devices without system-as-root, to be
unified with system-as-root devices for all aspects of boot after the
pivot_root.
Bug: 79758715
Test: boot hikey
Test: boot sailfish, boot sailfish into recovery
Change-Id: Iefa88a3ec5994e7989aa9f26f2de0351ffa5468b
We're moving past a world where static executables are needed,
including watchdogd, so treat this like any other executable and place
it in /system/bin.
Bug: 73660730
Test: watchdogd still runs
Change-Id: I1f7508fd55dce6e9ee72a6ab7a085011a76c0053
init is now dynamically linked to libselinux. This gives us about 100KB
extra space, which is valuable in the recovery partition.
Bug: 63673171
Test: m -j
Test: adb reboot recovery
Change-Id: I72c4f886cbbb9ce54f8221f05547f5b9f0e1adb0
recovery partition now supports shared librarys. Therefore, init can now
be built as a dynamic executable both for normal and recovery modes.
To save save in the recovery mode, not all libs are dynamically linked.
Libs that are only used by init in the recovery mode are still
statically linked.
Note: init is still a static executable for legacy devices where
system-as-root is not on, because the dynamic linker and shared libs
which are in /system are not available when init starts.
Bug: 63673171
Test: `adb reboot recovery; adb devices` shows the device ID
Test: device boots to the UI in normal mode.
Test: do that for both walleye (system-as-root) and bullhead (legacy
ramdisk).
Change-Id: I30c84ae6a8e507e507ad0bb71acad281316d9e90
I'd be not doing this for a while since some of this code doesn't
compile on host and libinit previously did. But after realizing
the property_service.cpp (libinit) references symbols in init.cpp
(init) and seeing a new linker error crop up due to that, it's time to
make the fix.
My only hold out previously was that libinit compiled on host bionic
and some of init (builtins.cpp, etc) do not, however given that we
don't actually have host bionic support or host bionic init tests,
that isn't a good reason. We can and should mock out the libraries
that aren't available with host bionic when ready.
Test: build, unit tests, boot
Change-Id: Ie49362ddb637924efc272540a4f32b693643fcdc
Instead of requiring each process to parse the property contexts files
in libc initialization, this change has property_service parse these
files one into a serialized trie, which the property code in libc can
then directly interpret for mapping property names to their associated
SELinux context.
Bug: 36001741
Test: boot bullhead, walleye, run unit tests
Change-Id: If67073d56e800b3ca667fb5322e6b993e7d810f6
This associates every service with a list of HIDL services
it provides. If these are disabled, hwservicemanager will
request for the service to startup.
Bug: 64678982
Test: manual with the light service
Change-Id: Ibf8a6f1cd38312c91c798b74574fa792f23c2df4
I probably should have done this from the start... There's a shim to
convert my manually serialized format to protobuf, and since that has
not yet shipped, it'll be reverted in a short period of time.
Test: init unit tests
Test: upgrade from legacy and intermediate property formats successfully
Change-Id: Iad25f6c30d0b44d294230a53dd6876222d1c785b
This allows Android to cleanly shutdown when running in a PID namespace
in a way that does not rely on adbd running. This is useful to allow
Android to be running in a container and its lifetime managed by an
OCI-compliant tool.
Bug: 65415372
Test: `kill -TERM 1` as root is correctly dropped.
Test: `kill -TERM 1` from the init PID namespace causes init to cleanly shutdown.
Change-Id: Ia66ebdb436221919081bc4723337c0c7f1e53b09
service.cpp, which is part of libinit, references symbols in
property_service.cpp, which causes the linker to complain when linking
libinit.a in some situations.
Therefore, we move property_service.cpp to libinit.
Separately, this will make it easier to write tests for
property_service.cpp, which we will want to do in the future.
Test: build, init unit tests
Change-Id: If1cffa8510b97e9436efed3c8ea0724272383eba
We've blown up twice in init due to the unsigned integer overflow
sanitizer despite the overflows in question being both defined and
intentional.
Test: boot
Change-Id: I08effe3202ac1367d858982ff5478b3a088bab37
clang is the default compiler since Android nougat
Test: mma & verified it´s still build with clang
Change-Id: I34adaeef2f6558a09f26027271222bad94780507
Signed-off-by: Lennart Wieboldt <lennart.1997@gmx.de>
Setting androidboot.seccomp=global on the kernel command line shall
enable seccomp for all processes rather than just in zygote. Doing
this has a performance impact, for now it shall just be used to audit
syscall usage during testing.
Bug: 37960259
Change-Id: I6b9fc95e9bec5e2bcfe6ef0b4343a5b422e30152
init calls fs_mgr to format ext4 partitions. This requires
e2fsdroid and mke2fs in /system/bin/
Bug: 35219933
Change-Id: Ia32fe438cd9b9332f8e18e0cbe7f61bd050adcb1
(cherry picked from commit 041f849548)
Modified Android.mk to define cflag "USER_MODE_LINUX" if
TARGET_USER_MODE_LINUX := true in BoardCofig.mk.
Modified set_mmap_rnd_bits_action to return 0 if "USER_MODE_LINUX" is
defined. This is needed since uml does not support the mmap_rnd_bits
sysctl, and init would otherwise crash without this check.
Test: manual
Bug: 32523022
Change-Id: I409ef64a1fa253bfb3f9fb59d0267be159819bb8
Signed-off-by: Quang Luong <qal@google.com>
Move libinit, init_tests, and test_service to Android.bp
Leave init in Android.mk as it has unfulfilled dependencies, but
create a comment in Android.bp for future use.
Remove libinit_parser and init_parser_tests as that code was never
used in init.
Bug: 36970783
Bug: 37512442
Test: Build, boot bullhead, init unit tests
Change-Id: Id81cd10ea09453a5fd762ba9189276aad79d5444
This should affect only builds that call clang-tidy.
Without this change, clang-tidy has segmentation fault
when compiling several files in the system/core/init directory.
Bug: 38002385
Test: build with WITH_TIDY=1
Change-Id: I63b898370c43e1d6b02671751137b1027ba4cdac
Add unit test to ensure all POD types of Service are initialized.
Bug: 37855222
Test: Ensure bugreport is triggered via keychord properly.
Test: New unit tests
Change-Id: If2cfea15a74ab417a7b909a60c264cb8eb990de7
Previously init_parser.cpp was made generic and capable of parsing any
number of differently named 'sections' or prefixed lines. We now use
these capabilities to do the parsing for ueventd.
Bug: 36250207
Bug: 33785894
Test: boot bullhead and ensure the right /dev nodes exist
with the right permissions set
Test: verify no boot time difference
Change-Id: I698ca962d414f8135af32f6c9cd778841b2b8b53
Also renames "early mount" to "first stage mount" to prevent confusion
with "mount_all --early", which is run in the init second stage.
Also creates a base class: FirstStageMount and two derived classes:
FirstStageMountVBootV1 and FirstStageMountVBootV2 to replace/refactor
existing functions:
- early_mount() -> DoFirstStageMount() and FirstStageMount::DoFirstStageMount()
- vboot_1_0_early_partitions -> FirstStageMountVBootV1::GetRequiredDevices()
- vboot_2_0_early_partitions -> FirstStageMountVBootV2::GetRequiredDevices()
- vboot_1_0_mount_partitions ->
FirstStageMount::MountPartitions() and
FirstStageMountVBootV1::SetUpDmVerity()
- vboot_2_0_mount_partitions ->
FirstStageMount::MountPartitions() and
FirstStageMountVBootV2::SetUpDmVerity()
Bug: 37413399
Test: first stage mount /vendor with vboot 2.0 (avb) on bullhead
Test: first stage mount /system with without verity on bullhead
Test: first stage mount /vendor with with vboot 1.0 on sailfish
Change-Id: I6584bdf7d832c9fbc8740f97c9b8b94e68a90783
Jiyong Park