Resolve issues seen on continuous testing frame:
- statistics test, info instead of fail on missing radio log data.
- sepolicy switch from /data/misc/logd/ to /data/backup/ as the
directory we access(2) to inject sepolicy violations. The key here
is we are still root, but we are in u:r:shell:s0, and the directory
does not provide us DAC access (0700 system system) so we trigger
the pair dac_override and dac_read_search on every try to get past
the message de-duper. /data/misc/logd is not always there, until
logpersist is enabled, but /data/backup is always there.
- a stricter signature of '): avc: denied'
- put in a looser threshold for sepolicy_rate_limiter_spam test.
Test: gTest logd-unit-tests --gtest_filter=logd.sepolicy*
Bug: 34454758
Change-Id: I28ce4fdb51dc4869944e3253b593ce222d16ec98
Processing overhead for selinux violation messages is costly. We want
to deal with bursts of violations, but we have no intent of allowing
that sustained burst to go unabated as there is a cost of processing
and battery usage.
Tunables in libaudit.h are:
AUDIT_RATE_LIMIT_DEFAULT 20 /* acceptable burst rate */
AUDIT_RATE_LIMIT_BURST_DURATION 10 /* number of seconds of burst */
AUDIT_RATE_LIMIT_MAX 5 /* acceptable sustained rate */
Since we can only asymptotically handle DEFAULT rate, we set an upper
threshold of half way between the MAX and DEFAULT rate.
Default kernel audit subsystem message rate is set to 20 a second.
If sepolicy exceeds 125 violation messages over up to ten seconds
(>=~12/s), tell kernel audit subsystem to drop the rate to 5 messages
a second. If rate drops below 50 messages over the past ten seconds
(<5/s), tell kernel it is ok to increase the burst rate back to 20
messages a second.
Test: gTest logd-unit-tests --gtest_filter=logd.sepolicy_rate_limiter_*
Bug: 27878170
Change-Id: I843f8dcfbb3ecfbbe94a4865ea332c858e3be7f2
Some kernels have a bug which causes a newline to show up in audit
messages. The embedded newlines cause one message to look like two due
to prefix controls.
Replace any newlines with spaces. Duplicate spaces are further
consolidated in code immediately after this newly added code.
Test: create an audit message with a newline, and watch it be cleaned up.
Bug: 27878170
Change-Id: Id90c29ab9e10d3be96f51403b0293622d782422a
log selinux audit messages boolean (true or false, default true)
selection for logging destinations:
ro.logd.auditd - turn on logd.auditd to pick up violations.
ro.logd.auditd.dmesg - to the kernel log.
ro.logd.auditd.main - to the "main" log buffer.
ro.logd.auditd.events - to the "events" log buffer.
We used to also read logd.auditd.dmesg and persist.logd.auditd.dmesg
which do not get refreshed when /data mounts internally. This is a
confusing state as these properties will be read after a logd crash
and restart, adjusting the behavior of the logger. Same can be said
for logd.auditd as well. Drop reading these other parameters.
Test: manual set r/o parameters, stop/start logd to confirm behavior
Bug: 33969000
Bug: 27878170
Change-Id: I1a6bb4a903074c9aa7b227cf583a0094d49cbefd
Until the socket ages out, it sticks around and gets reused in
subsequent tests affecting the outcome of those tests. We opt
to run logd.timeout in a forked and isolated process to keep
these conditions from interfering.
Adjusted benchmark execute to only run the tests we are
interested in to improve the time it takes to run.
Commented some areas of code to make them easier to maintain.
Test: gTest logd-unit-tests success
Bug: 33962045
Change-Id: Ic1b98bc4a2d7e8927f1a87628e3bcc368c9cf8ce
Caused +/- field data to land under the Pruned column
This reverts commit 0adcc3e3e8.
Test: manual
Bug: 30118730
Change-Id: Ic75ce3a90baded19f3efc0cc77474fe5d9a8accd
As an extension to the duplicate multiple message filtering, special
case liblog tagged event messages to be summed. This solves the
inefficient and confusing duplicate message report from the DOS attack
detection such as:
liblog: 2
liblog: 2
liblog: 2
liblog: 2
liblog: 3
which would result in:
liblog: 2
chatty: ... expire 2 lines
liblog: 2
liblog: 3
And instead sums them and turns them all into:
liblog: 11
liblog messages should never be subject to chatty conversion.
Test: liblog-benchmarks manually check for coalesced liblog messages
and make sure they do not turn into chatty messages.
Instrumented code to capture sum intermediates to be sure.
Bug: 33535908
Change-Id: I3bf03c4bfa36071b578bcd6f62234b409a91184b
Inspection turned up that for the case of three identical messages,
the result would be a stutter of the first message only. Added
comments to describe the state machine, incoming variables, outcoming
and false condition outputs, for proper maintenance in the future.
Test: gTest liblog-benchmarks BM_log_maximum* and manually check
for correct midstream chatty messages,
Bug: 33535908
Change-Id: I852260d18a484e6207b80063159f1a74eaa83b55
If a series of messages arrive from a single source with identical
message content payload, then suppress them and generate a chatty
report. The checking is done on a per log id basis.
This alters the assumption that chatty messages are always at the
oldest entries, they now show up in the middle too. To address this
change in behavior we print the first line, a chatty reference
which internally takes little space, then the last line in the series.
This does not conserve processing time in logd, and certainly has no
impact on the long path of formatting and submitting log messages from
from the source, but it may contribute to memory space and signal to
noise savings under heavy spammy loads.
Test: gTest liblog-unit-tests, logd-unit-tests & logcat-unit-tests
Bug: 33535908
Change-Id: I3160c36d4f4e2f8216f528605a1b3993173f4dec
To support upcoming disk usage calculation optimizations, this change
creates a new GID for each app that will be used to mark its cached
data. We're allocating these unique GIDs so that we can use
quotactl() to track cached data on a per-app basis.
This change also tightens up the implementation of both the cache
and shared GID calculation to ensure that they stay inside the valid
ranges, and includes tests to verify.
Test: builds, boots, tests pass
Bug: 27948817
Change-Id: Ie4377e5aae267f2da39a165888139228995987cb
Move existing fast<str*cmp> templates for general use, pulled from
the implementation used in logd that dealt with speed through cache
locality and subroutine call mitigation. Rename to fastcmp.
Test: logd-benchmarks and based on manual profiling from the past
Bug: 31456426
Change-Id: Ic62f4a437fc3e06ffdeaae73a6f34e197957a6b0
NULL represents system default. In the future, NULL could represent
static and dynamic tags, which can come from multiple files based on
implementation details in the liblog library.
Test: gTest logd-unit-tests & liblog-unit-tests
Bug: 31456426
Change-Id: I0e3d296de81ca299ae63d7b83781639ee67ec298
Debugging aid. Allows us to run:
$ cat -n '<STUFF>\0EXIT\0' | nc -U /dev/socket/logd
and the pipeline will exit once done. Without the EXIT command
we will have to <CTRL+C> out to terminate the pipeline. This is
necessary since Android's netcat command does not support the -q
feature, and having the EXIT command is faster and cleaner anyways.
Test: manual as noted above.
Bug: 31456426
Change-Id: I65333358188db85e2eb1bb6a14deed1565826ac4
files.[h|cpp] is bound to be abused with junk, replace with
android_get_control_file.[h|cpp]. Plus some sundry cleanup.
Test: gTest libcutils-tests, logd-unit-tests, liblog-unit-tests,
logcat-unit-tests and init_tests
Bug: 32450474
Change-Id: Ibd4a7aa4624ea19a43d1f98a3c71ac37805d36b5
An estimate based on chatty impact for all known pids, uids and tags
and per log id if applicable, calculate the maximum last pruned
watermark iterator map usage and add to the Total Overhead.
Test: Confirm that the Total Overhead change is negligable.
Bug: 31942525
Change-Id: Icd2e9bc0747c3376ca0e9c90aa110c103529d98f
Add in to the Total Overhead the amount of storage we are
using to hold on to the statistics.
Test: see that the Total Overhead accounts for about 100K
Bug: 31942525
Change-Id: Ibe241c0bccc5a9df52395802338c8a7fc3b64104
* changes:
logd: if eng build, be a bit more permissive about failures
libcutils: klog inherit android_get_control_file("/dev/kmsg")
logd: start logd service in logd uid
logd: auditd + klogd control CAPS
logd: drop capabilities in logd --reinit and logd.daemon
logd: drop libminijail dependency
logd: start logd services in logd gid
logd: set executable's capabilities in file system
logd: inherit android_get_control_file()
init: service file keyword
libcutils: add android_get_control_file()
libcutils: add android_get_control_socket() test
Allows us some leaway to investigate logd issues on eng builds
Test: gTests logd-unit-tests, liblog-unit-tests and logcat-unit-tests
Manual on eng builds, bad logd.rc to fake permission issues
Bug: 32450474
Change-Id: I432016e29e5601d67c502076ead941cecdcbebe7
Use libcap instead of libminijail. Set CAP_SETGID before setgroups,
then clear it afterwards.
Test: gTest logd-unit-tests, liblog-unit-tests and logcat-unit-tests
Bug: 32450474
Change-Id: I2ed027fd5efd95f76b1dd4c5791bae5f2ea94c28
Setup and then collect from the environment /proc/kmsg and /dev/kmsg
file descriptors. Do not do so for logcat --reinit.
Test: gTest logd-unit-tests, liblog-unit-tests and logcat-unit-tests
Bug: 32450474
Change-Id: Ied537ca561fcd4e71a9ad9c57398a23ba23f6ced
Do not allow anyone to see logd memory.
Test: gTest logd-unit-tests, liblog-unit-tests and logcat-unit-tests
Bug: 32450474
Change-Id: Ic7377efcb7e1d3cd91b50741061037a0fb589045
Mark Salyzyn