It's now specified in the hal .rc file.
Bug: 37105075
Bug: 37483427
Test: Wifi HAL runs on Fugu and Pixel.
Change-Id: Iead8d4146a794cf9afbaa06a60e9f269ddc425af
We can't reuse the GID range for internal cache files, otherwise
we don't have a way to tease apart the difference when deciding if
it's safe to move apps.
Test: builds, boots
Bug: 37193650
Change-Id: I22c4e575cd557636e74c5c73035adb1d4dcbb7f7
By setting vendor_available, the following may become true:
* a prebuilt library from this release may be used at runtime by
in a later releasse (by vendor code compiled against this release).
so this library shouldn't depend on runtime state that may change
in the future.
* this library may be loaded twice into a single process (potentially
an old version and a newer version). The symbols will be isolated
using linker namespaces, but this may break assumptions about 1
library in 1 process (your singletons will run twice).
Background:
This means that these modules may be built and installed twice --
once for the system partition and once for the vendor partition. The
system version will build just like today, and will be used by the
framework components on /system. The vendor version will build
against a reduced set of exports and libraries -- similar to, but
separate from, the NDK. This means that all your dependencies must
also mark vendor_available.
At runtime, /system binaries will load libraries from /system/lib*,
while /vendor binaries will load libraries from /vendor/lib*. There
are some exceptions in both directions -- bionic(libc,etc) and liblog
are always loaded from /system. And SP-HALs (OpenGL, etc) may load
/vendor code into /system processes, but the dependencies of those
libraries will load from /vendor until it reaches a library that's
always on /system. In the SP-HAL case, if both framework and vendor
libraries depend on a library of the same name, both versions will be
loaded, but they will be isolated from each other.
It's possible to compile differently -- reducing your source files,
exporting different include directories, etc. For details see:
https://android-review.googlesource.com/368372
None of this is enabled unless the device opts into the system/vendor
split with BOARD_VNDK_VERSION := current.
Bug: 36426473
Bug: 36079834
Test: m -j libcutils
Test: attempt to compile with BOARD_VNDK_VERSION := current
Test: (sanity) boot internal marlin
Change-Id: I76f9b28ef08a26d84d1365881e00696cc1dcfe5d
- moved __android_log_is_debuggable to a new public header
(log_properties.h)
- vendor version of sched_policy uses ALOG* instead SLOG*
Test: (sanity) liblog-unit-tests
Test: (sanity) libcutils_test (noting b/b/32972117, two tests continue
to fail)
Test: system/core as a whole makes with BOARD_VNDK_VERSION := current
now with no problems.
Test: boots/works on internal marlin
Bug: 33241851
Change-Id: I5bc1f348dc0f0c8814bec5b5c3d2c52c825ab640
(cherry picked from commit 6e9cb8fd79)
Strip off trailing / then /system and then add back the appropriate
config directory. This fixes an issue with reading vendor, oem or odm
partitions.
Test: manual build successfully interprets all etc/fs_config_* files.
Test: manual incremental build successfully interprets all etc/fs_config_* files.
Bug: 36071012
Change-Id: Iba363f0731bb8d15e595bb45c56db97722edabc2
(cherry picked from commit a9403f0db8)
private/fs_config.h is required in order to build an independent
test that requires internal binary knowledge of the
etc/fs_config_(files|dirs) files.
Test: compile
Bug: 36071012
Change-Id: I268bcfdbb6d45b7bf6040cbf307a4e34812f5fef
After removing bg_non_interactive cgroup, there is only a ROOT cgroup.
This CL removes the no-op trying to set cgroup.
It also removes the attempt to open non-exist bg_non_interactive cgroup.
Bug: 36649832
Test: marlin boosts and cgroup ROOT task looks normal
Change-Id: Ibccd6db1499306174c940aec9219b20c1b86173d
Add reading of vendor file-system config files
/odm/etc/fs_config_dirs and /odm/etc/fs_config_files.
Order of interpretation (for dirs and files respectively):
- /system/etc/fs_config_dirs or /system/etc/fs_config_files
- /vendor/etc/fs_config_dirs or /vendor/etc/fs_config_files
- /oem/etc/fs_config_dirs or /oem/etc/fs_config_files
- /odm/etc/fs_config_dirs or /odm/etc/fs_config_files
- internal android_dirs[] or android_files[] structures.
No restrictions are placed on the odm file-system config files,
although the developer is advised to restrict the scope to the /odm
file-system since the intent is to provide support only for
customized portions of odm.img.
Test: full build and install smoke test and inspection
Bug: 36071012
Change-Id: Ic3afb5bb4ea20b15bd5df728be9f16045bf5b039
- Emergency shutdown just marks the fs as clean while leaving fs
in the middle of any state. Do not use it anymore.
- Changed android_reboot to set sys.powerctl property so that
all shutdown can be done by init.
- Normal reboot sequence changed to
1. Terminate processes (give time to clean up). And wait for
completion based on ro.build.shutdown_timeout.
Default value (when not set) is changed to 3 secs. If it is 0, do not
terminate processes.
2. Kill all remaining services except critical services for shutdown.
3. Shutdown vold using "vdc volume shutdown"
4. umount all emulated partitions. If it fails, just detach.
Wait in step 5 can handle it.
5. Try umounting R/W block devices for up to max timeout.
If it fails, try DETACH.
If umount fails to complete before reboot, it can be detected when
system reboots.
6. Reboot
- Log shutdown time and umount stat to log so that it can be collected after reboot
- To umount emulated partitions, all pending writes inside kernel should
be completed.
- To umount /data partition, all emulated partitions on top of /data should
be umounted and all pending writes should be completed.
- umount retry will only wait up to timeout. If there are too many pending
writes, reboot will discard them and e2fsck after reboot will fix any file system
issues.
bug: 36004738
bug: 32246772
Test: many reboots combining reboot from UI and adb reboot. Check last_kmsg and
fs_stat after reboot.
Change-Id: I6e74d6c68a21e76e08cc0438573d1586fd9aaee2
Anyone who can read this file can call flock(..., LOCK_EX) on it,
thereby blocking any future iptables commands from running.
Restrict it to user AID_RADIO, which includes device-specific
network management daemons, and group root.
Bug: 36108349
Test: see https://android-review.googlesource.com/#/c/348939/
Change-Id: I4dae4b5a835fabdc1a61a330e0446b39651f8156
Bug: 33241851
Test: No changes needed for modules not using VNDK.
For VNDK, enable BOARD_VNDK_VERSION in BoardConfig.mk
and add libcutils to modules that need these headers.
Change-Id: I6102778aab35ed26a5ddde11230502dcd4edc852
Add reading of vendor file-system config files
/oem/etc/fs_config_dirs and /oem/etc/fs_config_files.
Order of interpretation (for dirs and files respectively):
- /system/etc/fs_config_dirs or /system/etc/fs_config_files
- /vendor/etc/fs_config_dirs or /vendor/etc/fs_config_files
- /oem/etc/fs_config_dirs or /oem/etc/fs_config_files
- internal android_dirs[] or android_files[] structures.
No restrictions are placed on the oem file-system config files,
although the developer is advised to restrict the scope to the /oem
file-system since the intent is to provide support only for
customized portions of oem.img.
Test: full build and install smoke test and inspection
Bug: 36071012
Change-Id: I56f3fed5efa44d622a9a110937dbc949083d44ae
Add reading of vendor file-system config files
/vendor/etc/fs_config_dirs and /vendor/etc/fs_config_files.
Order of interpretation (for dirs and files respectively):
- /system/etc/fs_config_dirs or /system/etc/fs_config_files
- /vendor/etc/fs_config_dirs or /vendor/etc/fs_config_files
- internal android_dirs[] or android_files[] structures.
No restrictions are placed on the vendor file-system config files,
although the developer is advised to restrict the scope to the /vendor
file-system since the intent is to provide support only for
customized portions of vendor.img.
Test: full build and install smoke test and inspection
Bug: 36071012
Change-Id: I4077bd6afcda2ee16189b2eb3c322af15205bbb9
Sort android_files[] first by requirements, grouping, specificity and
finally by alphanumeric order.
Test: full build and install smoke test and inspection
Bug: 36071012
Change-Id: I92c4090eac0067e0327ac7c8dde229747893d585
Sort android_dirs[] first by requirements, grouping, specificity and
finally by alphanumeric order.
Test: full build and install smoke test and inspection
Bug: 36071012
Change-Id: Iff579600b05d7b2a0b9fc7d9e9d897e0bb69aebd
Comply with clang-format. Adjust some comments.
Test: full build and install smoke test and inspection
Bug: 36071012
Change-Id: I459a08b4dc4333ab3d75207621a27587849386a5
Move last reboot reason file to new directory data/misc/reboot/ to
require only SELinux permissions specific to this new file.
Bug: 30994946
Test: manual: reboot command, setprop sys.powerctl
Change-Id: I1e067235aa4b06391cff8ab0741a9d317ba5b7da
Save a string identifying the reason for last Android reboot or power
off in file /data/misc/recovery/last_reboot_reason . This file may
be used for informing users of reboot or shutdown reasons at next
boot, and for other diagnostic purposes.
Bug: 30994946
Test: Manual: reboot, setprop sys.powerctl
Change-Id: I01e44473fdd21b33e9e4dced77aba9a66b6d3755
The qtaguid_tagSocket() function tags a network socket by passing a
reference to the given socket to the qtaguid kernel module. The module
will keep the socket alive even if the process calls close() on said
socket. In this scenario, the socket object would not be destroyed
even if all the file descriptor.
While this is at least a memory leak, it plays bad with epoll(7)
if you also didn't remove the socket from the epoll fd before closing
since epoll will not notice that the socket was closed and there is no
way to remove the socket from epoll after it was closed.
This patch updates the documentation to explicitly mention that the
socket must be untag before closing or bad things happen.
Bug: 36264049
Test: None.
Change-Id: I564a9b6d11d22b43a6c12312524386c0338b42ed
Add ANDROID_RB_THERMOFF command to android_reboot(), denoting a power
off due to thermal limits exceeded. When this command is used, Android
may provide notification to the user about the potentially unexpected
power off at next boot.
Bug: 30994946
Test: Manual: setprop sys.powerctl thermal-shutdown
Change-Id: If2cde1b6a3c281a5750b50295412a4801ed5b2f2
Move hostapd to /vendor/bin/ because it's only used by WIFI HAL.
Bug: 34236942
Bug: 34237659
Test: Hotspot works fine. Integration test.
Change-Id: I8d9f51ed85a0614bf0141461dabeddae094ad4e0
Bug: 35328775
Test: works in both binderized and passthrough modes
Merged-In: I61f1ff6b777089d7aad5184c0aee4f653897b32e
Change-Id: I61f1ff6b777089d7aad5184c0aee4f653897b32e
Randy Pan