========================= Serving WSGI Applications ========================= .. module:: werkzeug.serving There are many ways to serve a WSGI application. While you're developing it, you usually don't want to have a full-blown webserver like Apache up and running, but instead a simple standalone one. Because of that Werkzeug comes with a builtin development server. The easiest way is creating a small ``start-myproject.py`` file that runs the application using the builtin server:: from werkzeug.serving import run_simple from myproject import make_app app = make_app(...) run_simple('localhost', 8080, app, use_reloader=True) You can also pass it the `extra_files` keyword argument with a list of additional files (like configuration files) you want to observe. .. autofunction:: run_simple .. autofunction:: is_running_from_reloader .. autofunction:: make_ssl_devcert .. admonition:: Information The development server is not intended to be used on production systems. It was designed especially for development purposes and performs poorly under high load. For deployment setups have a look at the :doc:`/deployment/index` pages. .. _reloader: Reloader -------- .. versionchanged:: 0.10 The Werkzeug reloader constantly monitors modules and paths of your web application, and restarts the server if any of the observed files change. Since version 0.10, there are two backends the reloader supports: ``stat`` and ``watchdog``. - The default ``stat`` backend simply checks the ``mtime`` of all files in a regular interval. This is sufficient for most cases, however, it is known to drain a laptop's battery. - The ``watchdog`` backend uses filesystem events, and is much faster than ``stat``. It requires the `watchdog `_ module to be installed. The recommended way to achieve this is to add ``Werkzeug[watchdog]`` to your requirements file. If ``watchdog`` is installed and available it will automatically be used instead of the builtin ``stat`` reloader. To switch between the backends you can use the `reloader_type` parameter of the :func:`run_simple` function. ``'stat'`` sets it to the default stat based polling and ``'watchdog'`` forces it to the watchdog backend. .. note:: Some edge cases, like modules that failed to import correctly, are not handled by the stat reloader for performance reasons. The watchdog reloader monitors such files too. Colored Logging --------------- The development server highlights the request logs in different colors based on the status code. On Windows, `Colorama`_ must be installed as well to enable this. .. _Colorama: https://pypi.org/project/colorama/ Virtual Hosts ------------- Many web applications utilize multiple subdomains. This can be a bit tricky to simulate locally. Fortunately there is the `hosts file`_ that can be used to assign the local computer multiple names. This allows you to call your local computer `yourapplication.local` and `api.yourapplication.local` (or anything else) in addition to `localhost`. You can find the hosts file on the following location: =============== ============================================== Windows ``%SystemRoot%\system32\drivers\etc\hosts`` Linux / OS X ``/etc/hosts`` =============== ============================================== You can open the file with your favorite text editor and add a new name after `localhost`:: 127.0.0.1 localhost yourapplication.local api.yourapplication.local Save the changes and after a while you should be able to access the development server on these host names as well. You can use the :doc:`/routing` system to dispatch between different hosts or parse :attr:`request.host` yourself. Shutting Down The Server ------------------------ In some cases it can be useful to shut down a server after handling a request. For example, a local command line tool that needs OAuth authentication could temporarily start a server to listen for a response, record the user's token, then stop the server. One method to do this could be to start a server in a :mod:`multiprocessing` process, then terminate the process after a value is passed back to the parent. .. code-block:: python import multiprocessing from werkzeug import Request, Response, run_simple def get_token(q: multiprocessing.Queue) -> None: @Request.application def app(request: Request) -> Response: q.put(request.args["token"]) return Response("", 204) run_simple("localhost", 5000, app) if __name__ == "__main__": q = multiprocessing.Queue() p = multiprocessing.Process(target=get_token, args=(q,)) p.start() print("waiting") token = q.get(block=True) p.terminate() print(token) That example uses Werkzeug's development server, but any production server that can be started as a Python process could use the same technique and should be preferred for security. Another method could be to start a :mod:`subprocess` process and send the value back over ``stdout``. Troubleshooting --------------- On operating systems that support ipv6 and have it configured such as modern Linux systems, OS X 10.4 or higher as well as Windows Vista some browsers can be painfully slow if accessing your local server. The reason for this is that sometimes "localhost" is configured to be available on both ipv4 and ipv6 sockets and some browsers will try to access ipv6 first and then ipv4. At the current time the integrated webserver does not support ipv6 and ipv4 at the same time and for better portability ipv4 is the default. If you notice that the web browser takes ages to load the page there are two ways around this issue. If you don't need ipv6 support you can disable the ipv6 entry in the `hosts file`_ by removing this line:: ::1 localhost Alternatively you can also disable ipv6 support in your browser. For example if Firefox shows this behavior you can disable it by going to ``about:config`` and disabling the `network.dns.disableIPv6` key. This however is not recommended as of Werkzeug 0.6.1! Starting with Werkzeug 0.6.1, the server will now switch between ipv4 and ipv6 based on your operating system's configuration. This means if that you disabled ipv6 support in your browser but your operating system is preferring ipv6, you will be unable to connect to your server. In that situation, you can either remove the localhost entry for ``::1`` or explicitly bind the hostname to an ipv4 address (`127.0.0.1`) .. _hosts file: https://en.wikipedia.org/wiki/Hosts_file SSL --- .. versionadded:: 0.6 The builtin server supports SSL for testing purposes. If an SSL context is provided it will be used. That means a server can either run in HTTP or HTTPS mode, but not both. Quickstart `````````` The easiest way to do SSL based development with Werkzeug is by using it to generate an SSL certificate and private key and storing that somewhere and to then put it there. For the certificate you need to provide the name of your server on generation or a `CN`. 1. Generate an SSL key and store it somewhere: >>> from werkzeug.serving import make_ssl_devcert >>> make_ssl_devcert('/path/to/the/key', host='localhost') ('/path/to/the/key.crt', '/path/to/the/key.key') 2. Now this tuple can be passed as ``ssl_context`` to the :func:`run_simple` method:: run_simple('localhost', 4000, application, ssl_context=('/path/to/the/key.crt', '/path/to/the/key.key')) You will have to acknowledge the certificate in your browser once then. Loading Contexts by Hand ```````````````````````` You can use a ``ssl.SSLContext`` object instead of a tuple for full control over the TLS configuration. .. code-block:: python import ssl ctx = ssl.SSLContext(ssl.PROTOCOL_TLS_SERVER) ctx.load_cert_chain('ssl.cert', 'ssl.key') run_simple('localhost', 4000, application, ssl_context=ctx) .. versionchanged 0.10:: ``OpenSSL`` contexts are not supported anymore. Generating Certificates ``````````````````````` A key and certificate can be created in advance using the openssl tool instead of the :func:`make_ssl_devcert`. This requires that you have the `openssl` command installed on your system:: $ openssl genrsa 1024 > ssl.key $ openssl req -new -x509 -nodes -sha1 -days 365 -key ssl.key > ssl.cert Adhoc Certificates `````````````````` The easiest way to enable SSL is to start the server in adhoc-mode. In that case Werkzeug will generate an SSL certificate for you:: run_simple('localhost', 4000, application, ssl_context='adhoc') The downside of this of course is that you will have to acknowledge the certificate each time the server is reloaded. Adhoc certificates are discouraged because modern browsers do a bad job at supporting them for security reasons. This feature requires the cryptography library to be installed. Unix Sockets ------------ The dev server can bind to a Unix socket instead of a TCP socket. :func:`run_simple` will bind to a Unix socket if the ``hostname`` parameter starts with ``'unix://'``. :: from werkzeug.serving import run_simple run_simple('unix://example.sock', 0, app)