qemu/hw/i386/acpi-build.c

1566 lines
51 KiB
C
Raw Normal View History

i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
/* Support for generating ACPI tables and passing them to Guests
*
* Copyright (C) 2008-2010 Kevin O'Connor <kevin@koconnor.net>
* Copyright (C) 2006 Fabrice Bellard
* Copyright (C) 2013 Red Hat Inc
*
* Author: Michael S. Tsirkin <mst@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "acpi-build.h"
#include <stddef.h>
#include <glib.h>
#include "qemu-common.h"
#include "qemu/bitmap.h"
#include "qemu/range.h"
#include "hw/pci/pci.h"
#include "qom/cpu.h"
#include "hw/i386/pc.h"
#include "target-i386/cpu.h"
#include "hw/timer/hpet.h"
#include "hw/i386/acpi-defs.h"
#include "hw/acpi/acpi.h"
#include "hw/nvram/fw_cfg.h"
#include "bios-linker-loader.h"
#include "hw/loader.h"
#include "hw/isa/isa.h"
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
/* Supported chipsets: */
#include "hw/acpi/piix4.h"
#include "hw/acpi/pcihp.h"
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
#include "hw/i386/ich9.h"
#include "hw/pci/pci_bus.h"
#include "hw/pci-host/q35.h"
#include "hw/i386/q35-acpi-dsdt.hex"
#include "hw/i386/acpi-dsdt.hex"
#include "qapi/qmp/qint.h"
#include "qom/qom-qobject.h"
typedef struct AcpiCpuInfo {
DECLARE_BITMAP(found_cpus, ACPI_CPU_HOTPLUG_ID_LIMIT);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
} AcpiCpuInfo;
typedef struct AcpiMcfgInfo {
uint64_t mcfg_base;
uint32_t mcfg_size;
} AcpiMcfgInfo;
typedef struct AcpiPmInfo {
bool s3_disabled;
bool s4_disabled;
uint8_t s4_val;
uint16_t sci_int;
uint8_t acpi_enable_cmd;
uint8_t acpi_disable_cmd;
uint32_t gpe0_blk;
uint32_t gpe0_blk_len;
uint32_t io_base;
} AcpiPmInfo;
typedef struct AcpiMiscInfo {
bool has_hpet;
DECLARE_BITMAP(slot_hotplug_enable, PCI_SLOT_MAX);
const unsigned char *dsdt_code;
unsigned dsdt_size;
uint16_t pvpanic_port;
} AcpiMiscInfo;
typedef struct AcpiBuildPciBusHotplugState {
GArray *device_table;
GArray *notify_table;
struct AcpiBuildPciBusHotplugState *parent;
} AcpiBuildPciBusHotplugState;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
static void acpi_get_dsdt(AcpiMiscInfo *info)
{
uint16_t *applesmc_sta;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
Object *piix = piix4_pm_find();
Object *lpc = ich9_lpc_find();
assert(!!piix != !!lpc);
if (piix) {
info->dsdt_code = AcpiDsdtAmlCode;
info->dsdt_size = sizeof AcpiDsdtAmlCode;
applesmc_sta = piix_dsdt_applesmc_sta;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
if (lpc) {
info->dsdt_code = Q35AcpiDsdtAmlCode;
info->dsdt_size = sizeof Q35AcpiDsdtAmlCode;
applesmc_sta = q35_dsdt_applesmc_sta;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
/* Patch in appropriate value for AppleSMC _STA */
*(uint8_t *)(info->dsdt_code + *applesmc_sta) =
applesmc_find() ? 0x0b : 0x00;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
static
int acpi_add_cpu_info(Object *o, void *opaque)
{
AcpiCpuInfo *cpu = opaque;
uint64_t apic_id;
if (object_dynamic_cast(o, TYPE_CPU)) {
apic_id = object_property_get_int(o, "apic-id", NULL);
assert(apic_id < ACPI_CPU_HOTPLUG_ID_LIMIT);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
set_bit(apic_id, cpu->found_cpus);
}
object_child_foreach(o, acpi_add_cpu_info, opaque);
return 0;
}
static void acpi_get_cpu_info(AcpiCpuInfo *cpu)
{
Object *root = object_get_root();
memset(cpu->found_cpus, 0, sizeof cpu->found_cpus);
object_child_foreach(root, acpi_add_cpu_info, cpu);
}
static void acpi_get_pm_info(AcpiPmInfo *pm)
{
Object *piix = piix4_pm_find();
Object *lpc = ich9_lpc_find();
Object *obj = NULL;
QObject *o;
if (piix) {
obj = piix;
}
if (lpc) {
obj = lpc;
}
assert(obj);
/* Fill in optional s3/s4 related properties */
o = object_property_get_qobject(obj, ACPI_PM_PROP_S3_DISABLED, NULL);
if (o) {
pm->s3_disabled = qint_get_int(qobject_to_qint(o));
} else {
pm->s3_disabled = false;
}
qobject_decref(o);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
o = object_property_get_qobject(obj, ACPI_PM_PROP_S4_DISABLED, NULL);
if (o) {
pm->s4_disabled = qint_get_int(qobject_to_qint(o));
} else {
pm->s4_disabled = false;
}
qobject_decref(o);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
o = object_property_get_qobject(obj, ACPI_PM_PROP_S4_VAL, NULL);
if (o) {
pm->s4_val = qint_get_int(qobject_to_qint(o));
} else {
pm->s4_val = false;
}
qobject_decref(o);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
/* Fill in mandatory properties */
pm->sci_int = object_property_get_int(obj, ACPI_PM_PROP_SCI_INT, NULL);
pm->acpi_enable_cmd = object_property_get_int(obj,
ACPI_PM_PROP_ACPI_ENABLE_CMD,
NULL);
pm->acpi_disable_cmd = object_property_get_int(obj,
ACPI_PM_PROP_ACPI_DISABLE_CMD,
NULL);
pm->io_base = object_property_get_int(obj, ACPI_PM_PROP_PM_IO_BASE,
NULL);
pm->gpe0_blk = object_property_get_int(obj, ACPI_PM_PROP_GPE0_BLK,
NULL);
pm->gpe0_blk_len = object_property_get_int(obj, ACPI_PM_PROP_GPE0_BLK_LEN,
NULL);
}
static void acpi_get_misc_info(AcpiMiscInfo *info)
{
info->has_hpet = hpet_find();
info->pvpanic_port = pvpanic_port();
}
static void acpi_get_pci_info(PcPciInfo *info)
{
Object *pci_host;
bool ambiguous;
pci_host = object_resolve_path_type("", TYPE_PCI_HOST_BRIDGE, &ambiguous);
g_assert(!ambiguous);
g_assert(pci_host);
info->w32.begin = object_property_get_int(pci_host,
PCI_HOST_PROP_PCI_HOLE_START,
NULL);
info->w32.end = object_property_get_int(pci_host,
PCI_HOST_PROP_PCI_HOLE_END,
NULL);
info->w64.begin = object_property_get_int(pci_host,
PCI_HOST_PROP_PCI_HOLE64_START,
NULL);
info->w64.end = object_property_get_int(pci_host,
PCI_HOST_PROP_PCI_HOLE64_END,
NULL);
}
#define ACPI_BUILD_APPNAME "Bochs"
#define ACPI_BUILD_APPNAME6 "BOCHS "
#define ACPI_BUILD_APPNAME4 "BXPC"
#define ACPI_BUILD_DPRINTF(level, fmt, ...) do {} while (0)
#define ACPI_BUILD_TABLE_FILE "etc/acpi/tables"
#define ACPI_BUILD_RSDP_FILE "etc/acpi/rsdp"
static void
build_header(GArray *linker, GArray *table_data,
AcpiTableHeader *h, const char *sig, int len, uint8_t rev)
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
{
memcpy(&h->signature, sig, 4);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
h->length = cpu_to_le32(len);
h->revision = rev;
memcpy(h->oem_id, ACPI_BUILD_APPNAME6, 6);
memcpy(h->oem_table_id, ACPI_BUILD_APPNAME4, 4);
memcpy(h->oem_table_id + 4, sig, 4);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
h->oem_revision = cpu_to_le32(1);
memcpy(h->asl_compiler_id, ACPI_BUILD_APPNAME4, 4);
h->asl_compiler_revision = cpu_to_le32(1);
h->checksum = 0;
/* Checksum to be filled in by Guest linker */
bios_linker_loader_add_checksum(linker, ACPI_BUILD_TABLE_FILE,
table_data->data, h, len, &h->checksum);
}
static inline GArray *build_alloc_array(void)
{
return g_array_new(false, true /* clear */, 1);
}
static inline void build_free_array(GArray *array)
{
g_array_free(array, true);
}
static inline void build_prepend_byte(GArray *array, uint8_t val)
{
g_array_prepend_val(array, val);
}
static inline void build_append_byte(GArray *array, uint8_t val)
{
g_array_append_val(array, val);
}
static inline void build_append_array(GArray *array, GArray *val)
{
g_array_append_vals(array, val->data, val->len);
}
static void GCC_FMT_ATTR(2, 3)
build_append_nameseg(GArray *array, const char *format, ...)
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
{
/* It would be nicer to use g_string_vprintf but it's only there in 2.22 */
char s[] = "XXXX";
int len;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
va_list args;
va_start(args, format);
len = vsnprintf(s, sizeof s, format, args);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
va_end(args);
assert(len == 4);
g_array_append_vals(array, s, len);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
/* 5.4 Definition Block Encoding */
enum {
PACKAGE_LENGTH_1BYTE_SHIFT = 6, /* Up to 63 - use extra 2 bits. */
PACKAGE_LENGTH_2BYTE_SHIFT = 4,
PACKAGE_LENGTH_3BYTE_SHIFT = 12,
PACKAGE_LENGTH_4BYTE_SHIFT = 20,
};
static void build_prepend_package_length(GArray *package, unsigned min_bytes)
{
uint8_t byte;
unsigned length = package->len;
unsigned length_bytes;
if (length + 1 < (1 << PACKAGE_LENGTH_1BYTE_SHIFT)) {
length_bytes = 1;
} else if (length + 2 < (1 << PACKAGE_LENGTH_3BYTE_SHIFT)) {
length_bytes = 2;
} else if (length + 3 < (1 << PACKAGE_LENGTH_4BYTE_SHIFT)) {
length_bytes = 3;
} else {
length_bytes = 4;
}
/* Force length to at least min_bytes.
* This wastes memory but that's how bios did it.
*/
length_bytes = MAX(length_bytes, min_bytes);
/* PkgLength is the length of the inclusive length of the data. */
length += length_bytes;
switch (length_bytes) {
case 1:
byte = length;
build_prepend_byte(package, byte);
return;
case 4:
byte = length >> PACKAGE_LENGTH_4BYTE_SHIFT;
build_prepend_byte(package, byte);
length &= (1 << PACKAGE_LENGTH_4BYTE_SHIFT) - 1;
/* fall through */
case 3:
byte = length >> PACKAGE_LENGTH_3BYTE_SHIFT;
build_prepend_byte(package, byte);
length &= (1 << PACKAGE_LENGTH_3BYTE_SHIFT) - 1;
/* fall through */
case 2:
byte = length >> PACKAGE_LENGTH_2BYTE_SHIFT;
build_prepend_byte(package, byte);
length &= (1 << PACKAGE_LENGTH_2BYTE_SHIFT) - 1;
/* fall through */
}
/*
* Most significant two bits of byte zero indicate how many following bytes
* are in PkgLength encoding.
*/
byte = ((length_bytes - 1) << PACKAGE_LENGTH_1BYTE_SHIFT) | length;
build_prepend_byte(package, byte);
}
static void build_package(GArray *package, uint8_t op, unsigned min_bytes)
{
build_prepend_package_length(package, min_bytes);
build_prepend_byte(package, op);
}
static void build_extop_package(GArray *package, uint8_t op)
{
build_package(package, op, 1);
build_prepend_byte(package, 0x5B); /* ExtOpPrefix */
}
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
static void build_append_value(GArray *table, uint32_t value, int size)
{
uint8_t prefix;
int i;
switch (size) {
case 1:
prefix = 0x0A; /* BytePrefix */
break;
case 2:
prefix = 0x0B; /* WordPrefix */
break;
case 4:
prefix = 0x0C; /* DWordPrefix */
break;
default:
assert(0);
return;
}
build_append_byte(table, prefix);
for (i = 0; i < size; ++i) {
build_append_byte(table, value & 0xFF);
value = value >> 8;
}
}
static void build_append_int(GArray *table, uint32_t value)
{
if (value == 0x00) {
build_append_byte(table, 0x00); /* ZeroOp */
} else if (value == 0x01) {
build_append_byte(table, 0x01); /* OneOp */
} else if (value <= 0xFF) {
build_append_value(table, value, 1);
} else if (value <= 0xFFFF) {
build_append_value(table, value, 2);
} else {
build_append_value(table, value, 4);
}
}
static GArray *build_alloc_method(const char *name, uint8_t arg_count)
{
GArray *method = build_alloc_array();
build_append_nameseg(method, "%s", name);
build_append_byte(method, arg_count); /* MethodFlags: ArgCount */
return method;
}
static void build_append_and_cleanup_method(GArray *device, GArray *method)
{
uint8_t op = 0x14; /* MethodOp */
build_package(method, op, 0);
build_append_array(device, method);
build_free_array(method);
}
static void build_append_notify_target_ifequal(GArray *method,
GArray *target_name,
uint32_t value, int size)
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
{
GArray *notify = build_alloc_array();
uint8_t op = 0xA0; /* IfOp */
build_append_byte(notify, 0x93); /* LEqualOp */
build_append_byte(notify, 0x68); /* Arg0Op */
build_append_value(notify, value, size);
build_append_byte(notify, 0x86); /* NotifyOp */
build_append_array(notify, target_name);
build_append_byte(notify, 0x69); /* Arg1Op */
/* Pack it up */
build_package(notify, op, 1);
build_append_array(method, notify);
build_free_array(notify);
}
/* End here */
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
#define ACPI_PORT_SMI_CMD 0x00b2 /* TODO: this is APM_CNT_IOPORT */
static inline void *acpi_data_push(GArray *table_data, unsigned size)
{
unsigned off = table_data->len;
g_array_set_size(table_data, off + size);
return table_data->data + off;
}
static unsigned acpi_data_len(GArray *table)
{
#if GLIB_CHECK_VERSION(2, 22, 0)
assert(g_array_get_element_size(table) == 1);
#endif
return table->len;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
static void acpi_align_size(GArray *blob, unsigned align)
{
/* Align size to multiple of given size. This reduces the chance
* we need to change size in the future (breaking cross version migration).
*/
g_array_set_size(blob, ROUND_UP(acpi_data_len(blob), align));
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
/* Set a value within table in a safe manner */
#define ACPI_BUILD_SET_LE(table, size, off, bits, val) \
do { \
uint64_t ACPI_BUILD_SET_LE_val = cpu_to_le64(val); \
memcpy(acpi_data_get_ptr(table, size, off, \
(bits) / BITS_PER_BYTE), \
&ACPI_BUILD_SET_LE_val, \
(bits) / BITS_PER_BYTE); \
} while (0)
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
static inline void *acpi_data_get_ptr(uint8_t *table_data, unsigned table_size,
unsigned off, unsigned size)
{
assert(off + size > off);
assert(off + size <= table_size);
return table_data + off;
}
static inline void acpi_add_table(GArray *table_offsets, GArray *table_data)
{
uint32_t offset = cpu_to_le32(table_data->len);
g_array_append_val(table_offsets, offset);
}
/* FACS */
static void
build_facs(GArray *table_data, GArray *linker, PcGuestInfo *guest_info)
{
AcpiFacsDescriptorRev1 *facs = acpi_data_push(table_data, sizeof *facs);
memcpy(&facs->signature, "FACS", 4);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
facs->length = cpu_to_le32(sizeof(*facs));
}
/* Load chipset information in FADT */
static void fadt_setup(AcpiFadtDescriptorRev1 *fadt, AcpiPmInfo *pm)
{
fadt->model = 1;
fadt->reserved1 = 0;
fadt->sci_int = cpu_to_le16(pm->sci_int);
fadt->smi_cmd = cpu_to_le32(ACPI_PORT_SMI_CMD);
fadt->acpi_enable = pm->acpi_enable_cmd;
fadt->acpi_disable = pm->acpi_disable_cmd;
/* EVT, CNT, TMR offset matches hw/acpi/core.c */
fadt->pm1a_evt_blk = cpu_to_le32(pm->io_base);
fadt->pm1a_cnt_blk = cpu_to_le32(pm->io_base + 0x04);
fadt->pm_tmr_blk = cpu_to_le32(pm->io_base + 0x08);
fadt->gpe0_blk = cpu_to_le32(pm->gpe0_blk);
/* EVT, CNT, TMR length matches hw/acpi/core.c */
fadt->pm1_evt_len = 4;
fadt->pm1_cnt_len = 2;
fadt->pm_tmr_len = 4;
fadt->gpe0_blk_len = pm->gpe0_blk_len;
fadt->plvl2_lat = cpu_to_le16(0xfff); /* C2 state not supported */
fadt->plvl3_lat = cpu_to_le16(0xfff); /* C3 state not supported */
fadt->flags = cpu_to_le32((1 << ACPI_FADT_F_WBINVD) |
(1 << ACPI_FADT_F_PROC_C1) |
(1 << ACPI_FADT_F_SLP_BUTTON) |
(1 << ACPI_FADT_F_RTC_S4));
fadt->flags |= cpu_to_le32(1 << ACPI_FADT_F_USE_PLATFORM_CLOCK);
}
/* FADT */
static void
build_fadt(GArray *table_data, GArray *linker, AcpiPmInfo *pm,
unsigned facs, unsigned dsdt)
{
AcpiFadtDescriptorRev1 *fadt = acpi_data_push(table_data, sizeof(*fadt));
fadt->firmware_ctrl = cpu_to_le32(facs);
/* FACS address to be filled by Guest linker */
bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
ACPI_BUILD_TABLE_FILE,
table_data, &fadt->firmware_ctrl,
sizeof fadt->firmware_ctrl);
fadt->dsdt = cpu_to_le32(dsdt);
/* DSDT address to be filled by Guest linker */
bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
ACPI_BUILD_TABLE_FILE,
table_data, &fadt->dsdt,
sizeof fadt->dsdt);
fadt_setup(fadt, pm);
build_header(linker, table_data,
(void *)fadt, "FACP", sizeof(*fadt), 1);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
static void
build_madt(GArray *table_data, GArray *linker, AcpiCpuInfo *cpu,
PcGuestInfo *guest_info)
{
int madt_start = table_data->len;
AcpiMultipleApicTable *madt;
AcpiMadtIoApic *io_apic;
AcpiMadtIntsrcovr *intsrcovr;
AcpiMadtLocalNmi *local_nmi;
int i;
madt = acpi_data_push(table_data, sizeof *madt);
madt->local_apic_address = cpu_to_le32(APIC_DEFAULT_ADDRESS);
madt->flags = cpu_to_le32(1);
for (i = 0; i < guest_info->apic_id_limit; i++) {
AcpiMadtProcessorApic *apic = acpi_data_push(table_data, sizeof *apic);
apic->type = ACPI_APIC_PROCESSOR;
apic->length = sizeof(*apic);
apic->processor_id = i;
apic->local_apic_id = i;
if (test_bit(i, cpu->found_cpus)) {
apic->flags = cpu_to_le32(1);
} else {
apic->flags = cpu_to_le32(0);
}
}
io_apic = acpi_data_push(table_data, sizeof *io_apic);
io_apic->type = ACPI_APIC_IO;
io_apic->length = sizeof(*io_apic);
#define ACPI_BUILD_IOAPIC_ID 0x0
io_apic->io_apic_id = ACPI_BUILD_IOAPIC_ID;
io_apic->address = cpu_to_le32(IO_APIC_DEFAULT_ADDRESS);
io_apic->interrupt = cpu_to_le32(0);
if (guest_info->apic_xrupt_override) {
intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr);
intsrcovr->type = ACPI_APIC_XRUPT_OVERRIDE;
intsrcovr->length = sizeof(*intsrcovr);
intsrcovr->source = 0;
intsrcovr->gsi = cpu_to_le32(2);
intsrcovr->flags = cpu_to_le16(0); /* conforms to bus specifications */
}
for (i = 1; i < 16; i++) {
#define ACPI_BUILD_PCI_IRQS ((1<<5) | (1<<9) | (1<<10) | (1<<11))
if (!(ACPI_BUILD_PCI_IRQS & (1 << i))) {
/* No need for a INT source override structure. */
continue;
}
intsrcovr = acpi_data_push(table_data, sizeof *intsrcovr);
intsrcovr->type = ACPI_APIC_XRUPT_OVERRIDE;
intsrcovr->length = sizeof(*intsrcovr);
intsrcovr->source = i;
intsrcovr->gsi = cpu_to_le32(i);
intsrcovr->flags = cpu_to_le16(0xd); /* active high, level triggered */
}
local_nmi = acpi_data_push(table_data, sizeof *local_nmi);
local_nmi->type = ACPI_APIC_LOCAL_NMI;
local_nmi->length = sizeof(*local_nmi);
local_nmi->processor_id = 0xff; /* all processors */
local_nmi->flags = cpu_to_le16(0);
local_nmi->lint = 1; /* ACPI_LINT1 */
build_header(linker, table_data,
(void *)(table_data->data + madt_start), "APIC",
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
table_data->len - madt_start, 1);
}
/* Encode a hex value */
static inline char acpi_get_hex(uint32_t val)
{
val &= 0x0f;
return (val <= 9) ? ('0' + val) : ('A' + val - 10);
}
#include "hw/i386/ssdt-proc.hex"
/* 0x5B 0x83 ProcessorOp PkgLength NameString ProcID */
#define ACPI_PROC_OFFSET_CPUHEX (*ssdt_proc_name - *ssdt_proc_start + 2)
#define ACPI_PROC_OFFSET_CPUID1 (*ssdt_proc_name - *ssdt_proc_start + 4)
#define ACPI_PROC_OFFSET_CPUID2 (*ssdt_proc_id - *ssdt_proc_start)
#define ACPI_PROC_SIZEOF (*ssdt_proc_end - *ssdt_proc_start)
#define ACPI_PROC_AML (ssdp_proc_aml + *ssdt_proc_start)
/* 0x5B 0x82 DeviceOp PkgLength NameString */
#define ACPI_PCIHP_OFFSET_HEX (*ssdt_pcihp_name - *ssdt_pcihp_start + 1)
#define ACPI_PCIHP_OFFSET_ID (*ssdt_pcihp_id - *ssdt_pcihp_start)
#define ACPI_PCIHP_OFFSET_ADR (*ssdt_pcihp_adr - *ssdt_pcihp_start)
#define ACPI_PCIHP_OFFSET_EJ0 (*ssdt_pcihp_ej0 - *ssdt_pcihp_start)
#define ACPI_PCIHP_SIZEOF (*ssdt_pcihp_end - *ssdt_pcihp_start)
#define ACPI_PCIHP_AML (ssdp_pcihp_aml + *ssdt_pcihp_start)
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
#define ACPI_PCINOHP_OFFSET_HEX (*ssdt_pcinohp_name - *ssdt_pcinohp_start + 1)
#define ACPI_PCINOHP_OFFSET_ADR (*ssdt_pcinohp_adr - *ssdt_pcinohp_start)
#define ACPI_PCINOHP_SIZEOF (*ssdt_pcinohp_end - *ssdt_pcinohp_start)
#define ACPI_PCINOHP_AML (ssdp_pcihp_aml + *ssdt_pcinohp_start)
#define ACPI_PCIVGA_OFFSET_HEX (*ssdt_pcivga_name - *ssdt_pcivga_start + 1)
#define ACPI_PCIVGA_OFFSET_ADR (*ssdt_pcivga_adr - *ssdt_pcivga_start)
#define ACPI_PCIVGA_SIZEOF (*ssdt_pcivga_end - *ssdt_pcivga_start)
#define ACPI_PCIVGA_AML (ssdp_pcihp_aml + *ssdt_pcivga_start)
#define ACPI_PCIQXL_OFFSET_HEX (*ssdt_pciqxl_name - *ssdt_pciqxl_start + 1)
#define ACPI_PCIQXL_OFFSET_ADR (*ssdt_pciqxl_adr - *ssdt_pciqxl_start)
#define ACPI_PCIQXL_SIZEOF (*ssdt_pciqxl_end - *ssdt_pciqxl_start)
#define ACPI_PCIQXL_AML (ssdp_pcihp_aml + *ssdt_pciqxl_start)
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
#define ACPI_SSDT_SIGNATURE 0x54445353 /* SSDT */
#define ACPI_SSDT_HEADER_LENGTH 36
#include "hw/i386/ssdt-misc.hex"
#include "hw/i386/ssdt-pcihp.hex"
static void
build_append_notify_method(GArray *device, const char *name,
const char *format, int count)
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
{
int i;
GArray *method = build_alloc_method(name, 2);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
for (i = 0; i < count; i++) {
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
GArray *target = build_alloc_array();
build_append_nameseg(target, format, i);
assert(i < 256); /* Fits in 1 byte */
build_append_notify_target_ifequal(method, target, i, 1);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
build_free_array(target);
}
build_append_and_cleanup_method(device, method);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
static void patch_pcihp(int slot, uint8_t *ssdt_ptr)
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
{
unsigned devfn = PCI_DEVFN(slot, 0);
ssdt_ptr[ACPI_PCIHP_OFFSET_HEX] = acpi_get_hex(devfn >> 4);
ssdt_ptr[ACPI_PCIHP_OFFSET_HEX + 1] = acpi_get_hex(devfn);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
ssdt_ptr[ACPI_PCIHP_OFFSET_ID] = slot;
ssdt_ptr[ACPI_PCIHP_OFFSET_ADR + 2] = slot;
}
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
static void patch_pcinohp(int slot, uint8_t *ssdt_ptr)
{
unsigned devfn = PCI_DEVFN(slot, 0);
ssdt_ptr[ACPI_PCINOHP_OFFSET_HEX] = acpi_get_hex(devfn >> 4);
ssdt_ptr[ACPI_PCINOHP_OFFSET_HEX + 1] = acpi_get_hex(devfn);
ssdt_ptr[ACPI_PCINOHP_OFFSET_ADR + 2] = slot;
}
static void patch_pcivga(int slot, uint8_t *ssdt_ptr)
{
unsigned devfn = PCI_DEVFN(slot, 0);
ssdt_ptr[ACPI_PCIVGA_OFFSET_HEX] = acpi_get_hex(devfn >> 4);
ssdt_ptr[ACPI_PCIVGA_OFFSET_HEX + 1] = acpi_get_hex(devfn);
ssdt_ptr[ACPI_PCIVGA_OFFSET_ADR + 2] = slot;
}
static void patch_pciqxl(int slot, uint8_t *ssdt_ptr)
{
unsigned devfn = PCI_DEVFN(slot, 0);
ssdt_ptr[ACPI_PCIQXL_OFFSET_HEX] = acpi_get_hex(devfn >> 4);
ssdt_ptr[ACPI_PCIQXL_OFFSET_HEX + 1] = acpi_get_hex(devfn);
ssdt_ptr[ACPI_PCIQXL_OFFSET_ADR + 2] = slot;
}
/* Assign BSEL property to all buses. In the future, this can be changed
* to only assign to buses that support hotplug.
*/
static void *acpi_set_bsel(PCIBus *bus, void *opaque)
{
unsigned *bsel_alloc = opaque;
unsigned *bus_bsel;
if (bus->qbus.allow_hotplug) {
bus_bsel = g_malloc(sizeof *bus_bsel);
*bus_bsel = (*bsel_alloc)++;
object_property_add_uint32_ptr(OBJECT(bus), ACPI_PCIHP_PROP_BSEL,
bus_bsel, NULL);
}
return bsel_alloc;
}
static void acpi_set_pci_info(void)
{
PCIBus *bus = find_i440fx(); /* TODO: Q35 support */
unsigned bsel_alloc = 0;
if (bus) {
/* Scan all PCI buses. Set property to enable acpi based hotplug. */
pci_for_each_bus_depth_first(bus, acpi_set_bsel, NULL, &bsel_alloc);
}
}
static void build_pci_bus_state_init(AcpiBuildPciBusHotplugState *state,
AcpiBuildPciBusHotplugState *parent)
{
state->parent = parent;
state->device_table = build_alloc_array();
state->notify_table = build_alloc_array();
}
static void build_pci_bus_state_cleanup(AcpiBuildPciBusHotplugState *state)
{
build_free_array(state->device_table);
build_free_array(state->notify_table);
}
static void *build_pci_bus_begin(PCIBus *bus, void *parent_state)
{
AcpiBuildPciBusHotplugState *parent = parent_state;
AcpiBuildPciBusHotplugState *child = g_malloc(sizeof *child);
build_pci_bus_state_init(child, parent);
return child;
}
static void build_pci_bus_end(PCIBus *bus, void *bus_state)
{
AcpiBuildPciBusHotplugState *child = bus_state;
AcpiBuildPciBusHotplugState *parent = child->parent;
GArray *bus_table = build_alloc_array();
DECLARE_BITMAP(slot_hotplug_enable, PCI_SLOT_MAX);
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
DECLARE_BITMAP(slot_device_present, PCI_SLOT_MAX);
DECLARE_BITMAP(slot_device_system, PCI_SLOT_MAX);
DECLARE_BITMAP(slot_device_vga, PCI_SLOT_MAX);
DECLARE_BITMAP(slot_device_qxl, PCI_SLOT_MAX);
uint8_t op;
int i;
QObject *bsel;
GArray *method;
bool bus_hotplug_support = false;
if (bus->parent_dev) {
op = 0x82; /* DeviceOp */
build_append_nameseg(bus_table, "S%.02X_",
bus->parent_dev->devfn);
build_append_byte(bus_table, 0x08); /* NameOp */
build_append_nameseg(bus_table, "_SUN");
build_append_value(bus_table, PCI_SLOT(bus->parent_dev->devfn), 1);
build_append_byte(bus_table, 0x08); /* NameOp */
build_append_nameseg(bus_table, "_ADR");
build_append_value(bus_table, (PCI_SLOT(bus->parent_dev->devfn) << 16) |
PCI_FUNC(bus->parent_dev->devfn), 4);
} else {
op = 0x10; /* ScopeOp */;
build_append_nameseg(bus_table, "PCI0");
}
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
bsel = object_property_get_qobject(OBJECT(bus), ACPI_PCIHP_PROP_BSEL, NULL);
if (bsel) {
build_append_byte(bus_table, 0x08); /* NameOp */
build_append_nameseg(bus_table, "BSEL");
build_append_int(bus_table, qint_get_int(qobject_to_qint(bsel)));
memset(slot_hotplug_enable, 0xff, sizeof slot_hotplug_enable);
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
} else {
/* No bsel - no slots are hot-pluggable */
memset(slot_hotplug_enable, 0x00, sizeof slot_hotplug_enable);
}
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
memset(slot_device_present, 0x00, sizeof slot_device_present);
memset(slot_device_system, 0x00, sizeof slot_device_present);
memset(slot_device_vga, 0x00, sizeof slot_device_vga);
memset(slot_device_qxl, 0x00, sizeof slot_device_qxl);
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
for (i = 0; i < ARRAY_SIZE(bus->devices); i += PCI_FUNC_MAX) {
DeviceClass *dc;
PCIDeviceClass *pc;
PCIDevice *pdev = bus->devices[i];
int slot = PCI_SLOT(i);
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
if (!pdev) {
continue;
}
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
set_bit(slot, slot_device_present);
pc = PCI_DEVICE_GET_CLASS(pdev);
dc = DEVICE_GET_CLASS(pdev);
if (pc->class_id == PCI_CLASS_BRIDGE_ISA || pc->is_bridge) {
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
set_bit(slot, slot_device_system);
}
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
if (pc->class_id == PCI_CLASS_DISPLAY_VGA) {
set_bit(slot, slot_device_vga);
if (object_dynamic_cast(OBJECT(pdev), "qxl-vga")) {
set_bit(slot, slot_device_qxl);
}
}
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
if (!dc->hotpluggable || pc->is_bridge) {
clear_bit(slot, slot_hotplug_enable);
}
}
/* Append Device object for each slot */
for (i = 0; i < PCI_SLOT_MAX; i++) {
bool can_eject = test_bit(i, slot_hotplug_enable);
bool present = test_bit(i, slot_device_present);
bool vga = test_bit(i, slot_device_vga);
bool qxl = test_bit(i, slot_device_qxl);
bool system = test_bit(i, slot_device_system);
if (can_eject) {
void *pcihp = acpi_data_push(bus_table,
ACPI_PCIHP_SIZEOF);
memcpy(pcihp, ACPI_PCIHP_AML, ACPI_PCIHP_SIZEOF);
patch_pcihp(i, pcihp);
bus_hotplug_support = true;
} else if (qxl) {
void *pcihp = acpi_data_push(bus_table,
ACPI_PCIQXL_SIZEOF);
memcpy(pcihp, ACPI_PCIQXL_AML, ACPI_PCIQXL_SIZEOF);
patch_pciqxl(i, pcihp);
} else if (vga) {
void *pcihp = acpi_data_push(bus_table,
ACPI_PCIVGA_SIZEOF);
memcpy(pcihp, ACPI_PCIVGA_AML, ACPI_PCIVGA_SIZEOF);
patch_pcivga(i, pcihp);
} else if (system) {
/* Nothing to do: system devices are in DSDT or in SSDT above. */
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
} else if (present) {
void *pcihp = acpi_data_push(bus_table,
ACPI_PCINOHP_SIZEOF);
memcpy(pcihp, ACPI_PCINOHP_AML, ACPI_PCINOHP_SIZEOF);
patch_pcinohp(i, pcihp);
}
}
if (bsel) {
method = build_alloc_method("DVNT", 2);
for (i = 0; i < PCI_SLOT_MAX; i++) {
GArray *notify;
uint8_t op;
if (!test_bit(i, slot_hotplug_enable)) {
continue;
}
notify = build_alloc_array();
op = 0xA0; /* IfOp */
build_append_byte(notify, 0x7B); /* AndOp */
build_append_byte(notify, 0x68); /* Arg0Op */
build_append_int(notify, 0x1U << i);
build_append_byte(notify, 0x00); /* NullName */
build_append_byte(notify, 0x86); /* NotifyOp */
build_append_nameseg(notify, "S%.02X_", PCI_DEVFN(i, 0));
build_append_byte(notify, 0x69); /* Arg1Op */
/* Pack it up */
build_package(notify, op, 0);
build_append_array(method, notify);
build_free_array(notify);
}
build_append_and_cleanup_method(bus_table, method);
}
/* Append PCNT method to notify about events on local and child buses.
* Add unconditionally for root since DSDT expects it.
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
*/
if (bus_hotplug_support || child->notify_table->len || !bus->parent_dev) {
method = build_alloc_method("PCNT", 0);
/* If bus supports hotplug select it and notify about local events */
if (bsel) {
build_append_byte(method, 0x70); /* StoreOp */
build_append_int(method, qint_get_int(qobject_to_qint(bsel)));
build_append_nameseg(method, "BNUM");
build_append_nameseg(method, "DVNT");
build_append_nameseg(method, "PCIU");
build_append_int(method, 1); /* Device Check */
build_append_nameseg(method, "DVNT");
build_append_nameseg(method, "PCID");
build_append_int(method, 3); /* Eject Request */
}
/* Notify about child bus events in any case */
build_append_array(method, child->notify_table);
build_append_and_cleanup_method(bus_table, method);
/* Append description of child buses */
build_append_array(bus_table, child->device_table);
/* Pack it up */
if (bus->parent_dev) {
build_extop_package(bus_table, op);
} else {
build_package(bus_table, op, 0);
}
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
/* Append our bus description to parent table */
build_append_array(parent->device_table, bus_table);
/* Also tell parent how to notify us, invoking PCNT method.
* At the moment this is not needed for root as we have a single root.
*/
if (bus->parent_dev) {
build_append_byte(parent->notify_table, '^'); /* ParentPrefixChar */
build_append_byte(parent->notify_table, 0x2E); /* DualNamePrefix */
build_append_nameseg(parent->notify_table, "S%.02X_",
bus->parent_dev->devfn);
build_append_nameseg(parent->notify_table, "PCNT");
}
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
qobject_decref(bsel);
build_free_array(bus_table);
build_pci_bus_state_cleanup(child);
g_free(child);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
static void patch_pci_windows(PcPciInfo *pci, uint8_t *start, unsigned size)
{
ACPI_BUILD_SET_LE(start, size, acpi_pci32_start[0], 32, pci->w32.begin);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
ACPI_BUILD_SET_LE(start, size, acpi_pci32_end[0], 32, pci->w32.end - 1);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
if (pci->w64.end || pci->w64.begin) {
ACPI_BUILD_SET_LE(start, size, acpi_pci64_valid[0], 8, 1);
ACPI_BUILD_SET_LE(start, size, acpi_pci64_start[0], 64, pci->w64.begin);
ACPI_BUILD_SET_LE(start, size, acpi_pci64_end[0], 64, pci->w64.end - 1);
ACPI_BUILD_SET_LE(start, size, acpi_pci64_length[0], 64, pci->w64.end - pci->w64.begin);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
} else {
ACPI_BUILD_SET_LE(start, size, acpi_pci64_valid[0], 8, 0);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
}
static void
build_ssdt(GArray *table_data, GArray *linker,
AcpiCpuInfo *cpu, AcpiPmInfo *pm, AcpiMiscInfo *misc,
PcPciInfo *pci, PcGuestInfo *guest_info)
{
unsigned acpi_cpus = guest_info->apic_id_limit;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
int ssdt_start = table_data->len;
uint8_t *ssdt_ptr;
int i;
/* The current AML generator can cover the APIC ID range [0..255],
* inclusive, for VCPU hotplug. */
QEMU_BUILD_BUG_ON(ACPI_CPU_HOTPLUG_ID_LIMIT > 256);
g_assert(acpi_cpus <= ACPI_CPU_HOTPLUG_ID_LIMIT);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
/* Copy header and patch values in the S3_ / S4_ / S5_ packages */
ssdt_ptr = acpi_data_push(table_data, sizeof(ssdp_misc_aml));
memcpy(ssdt_ptr, ssdp_misc_aml, sizeof(ssdp_misc_aml));
if (pm->s3_disabled) {
ssdt_ptr[acpi_s3_name[0]] = 'X';
}
if (pm->s4_disabled) {
ssdt_ptr[acpi_s4_name[0]] = 'X';
} else {
ssdt_ptr[acpi_s4_pkg[0] + 1] = ssdt_ptr[acpi_s4_pkg[0] + 3] =
pm->s4_val;
}
patch_pci_windows(pci, ssdt_ptr, sizeof(ssdp_misc_aml));
ACPI_BUILD_SET_LE(ssdt_ptr, sizeof(ssdp_misc_aml),
ssdt_isa_pest[0], 16, misc->pvpanic_port);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
{
GArray *sb_scope = build_alloc_array();
uint8_t op = 0x10; /* ScopeOp */
build_append_nameseg(sb_scope, "_SB_");
/* build Processor object for each processor */
for (i = 0; i < acpi_cpus; i++) {
uint8_t *proc = acpi_data_push(sb_scope, ACPI_PROC_SIZEOF);
memcpy(proc, ACPI_PROC_AML, ACPI_PROC_SIZEOF);
proc[ACPI_PROC_OFFSET_CPUHEX] = acpi_get_hex(i >> 4);
proc[ACPI_PROC_OFFSET_CPUHEX+1] = acpi_get_hex(i);
proc[ACPI_PROC_OFFSET_CPUID1] = i;
proc[ACPI_PROC_OFFSET_CPUID2] = i;
}
/* build this code:
* Method(NTFY, 2) {If (LEqual(Arg0, 0x00)) {Notify(CP00, Arg1)} ...}
*/
/* Arg0 = Processor ID = APIC ID */
build_append_notify_method(sb_scope, "NTFY", "CP%0.02X", acpi_cpus);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
/* build "Name(CPON, Package() { One, One, ..., Zero, Zero, ... })" */
build_append_byte(sb_scope, 0x08); /* NameOp */
build_append_nameseg(sb_scope, "CPON");
{
GArray *package = build_alloc_array();
uint8_t op;
/*
* Note: The ability to create variable-sized packages was first introduced in ACPI 2.0. ACPI 1.0 only
* allowed fixed-size packages with up to 255 elements.
* Windows guests up to win2k8 fail when VarPackageOp is used.
*/
if (acpi_cpus <= 255) {
op = 0x12; /* PackageOp */
build_append_byte(package, acpi_cpus); /* NumElements */
} else {
op = 0x13; /* VarPackageOp */
build_append_int(package, acpi_cpus); /* VarNumElements */
}
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
for (i = 0; i < acpi_cpus; i++) {
uint8_t b = test_bit(i, cpu->found_cpus) ? 0x01 : 0x00;
build_append_byte(package, b);
}
build_package(package, op, 2);
build_append_array(sb_scope, package);
build_free_array(package);
}
{
AcpiBuildPciBusHotplugState hotplug_state;
acpi-build: append description for non-hotplug As reported in http://article.gmane.org/gmane.comp.emulators.qemu/253987 Mac OSX actually requires describing all occupied slots in ACPI - even if hotplug isn't enabled. I didn't expect this so I dropped description of all non hotpluggable slots from ACPI. As a result: before commit 99fd437dee468609de8218f0eb3b16621fb6a9c9 (enable hotplug for pci bridges), PCI cards show up in the "device tree" of OS X (System Information). E.g., on MountainLion users have: Hardware -> PCI Cards: Card Type Driver Installed Slot *ethernet Ethernet Controller Yes PCI Slot 2 pci8086,2934 USB UHC Yes PCI Slot 29 ethernet: Type: Ethernet Controller Driver Installed: Yes MSI: No Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Slot PCI Slot 2 Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 After commit 99fd437dee468609de8218f0eb3b16621fb6a9c9, users get: Hardware -> PCI Cards: This computer doesn't contain any PCI cards. If you installed PCI cards, make sure they're properly installed. Hardware -> Ethernet Cards ethernet: Type: Ethernet Controller Bus: PCI Vendor ID: 0x8086 Device ID: 0x100e Subsystem Vendor ID: 0x1af4 Subsystem ID: 0x1100 Revision ID: 0x0003 BSD name: en0 Kext name: AppleIntel8254XEthernet.kext Location: /System/Library/Extensions/... Version: 3.1.1b1 Ethernet still works, but it's not showing up on the PCI bus, and it no longer thinks it's plugged in to slot #2, as it used to before the change. To fix, append description for all occupied non hotpluggable PCI slots. One need to be careful when doing this: VGA devices are now described in SSDT, so we need to drop description from DSDT. And ISA devices are used in DSDT so drop them from SSDT. Reported-by: Gabriel L. Somlo <gsomlo@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Also update generated dsdt and pcihp hex dump files. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-04 23:43:47 +08:00
Object *pci_host;
PCIBus *bus = NULL;
bool ambiguous;
pci_host = object_resolve_path_type("", TYPE_PCI_HOST_BRIDGE, &ambiguous);
if (!ambiguous && pci_host) {
bus = PCI_HOST_BRIDGE(pci_host)->bus;
}
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
build_pci_bus_state_init(&hotplug_state, NULL);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
if (bus) {
/* Scan all PCI buses. Generate tables to support hotplug. */
pci_for_each_bus_depth_first(bus, build_pci_bus_begin,
build_pci_bus_end, &hotplug_state);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
build_append_array(sb_scope, hotplug_state.device_table);
build_pci_bus_state_cleanup(&hotplug_state);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
build_package(sb_scope, op, 3);
build_append_array(table_data, sb_scope);
build_free_array(sb_scope);
}
build_header(linker, table_data,
(void *)(table_data->data + ssdt_start),
"SSDT", table_data->len - ssdt_start, 1);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
static void
build_hpet(GArray *table_data, GArray *linker)
{
Acpi20Hpet *hpet;
hpet = acpi_data_push(table_data, sizeof(*hpet));
/* Note timer_block_id value must be kept in sync with value advertised by
* emulated hpet
*/
hpet->timer_block_id = cpu_to_le32(0x8086a201);
hpet->addr.address = cpu_to_le64(HPET_BASE);
build_header(linker, table_data,
(void *)hpet, "HPET", sizeof(*hpet), 1);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
static void
acpi_build_srat_memory(AcpiSratMemoryAffinity *numamem,
uint64_t base, uint64_t len, int node, int enabled)
{
numamem->type = ACPI_SRAT_MEMORY;
numamem->length = sizeof(*numamem);
memset(numamem->proximity, 0, 4);
numamem->proximity[0] = node;
numamem->flags = cpu_to_le32(!!enabled);
numamem->base_addr = cpu_to_le64(base);
numamem->range_length = cpu_to_le64(len);
}
static void
build_srat(GArray *table_data, GArray *linker,
AcpiCpuInfo *cpu, PcGuestInfo *guest_info)
{
AcpiSystemResourceAffinityTable *srat;
AcpiSratProcessorAffinity *core;
AcpiSratMemoryAffinity *numamem;
int i;
uint64_t curnode;
int srat_start, numa_start, slots;
uint64_t mem_len, mem_base, next_base;
srat_start = table_data->len;
srat = acpi_data_push(table_data, sizeof *srat);
srat->reserved1 = cpu_to_le32(1);
core = (void *)(srat + 1);
for (i = 0; i < guest_info->apic_id_limit; ++i) {
core = acpi_data_push(table_data, sizeof *core);
core->type = ACPI_SRAT_PROCESSOR;
core->length = sizeof(*core);
core->local_apic_id = i;
curnode = guest_info->node_cpu[i];
core->proximity_lo = curnode;
memset(core->proximity_hi, 0, 3);
core->local_sapic_eid = 0;
if (test_bit(i, cpu->found_cpus)) {
core->flags = cpu_to_le32(1);
} else {
core->flags = cpu_to_le32(0);
}
}
/* the memory map is a bit tricky, it contains at least one hole
* from 640k-1M and possibly another one from 3.5G-4G.
*/
next_base = 0;
numa_start = table_data->len;
numamem = acpi_data_push(table_data, sizeof *numamem);
acpi_build_srat_memory(numamem, 0, 640*1024, 0, 1);
next_base = 1024 * 1024;
for (i = 1; i < guest_info->numa_nodes + 1; ++i) {
mem_base = next_base;
mem_len = guest_info->node_mem[i - 1];
if (i == 1) {
mem_len -= 1024 * 1024;
}
next_base = mem_base + mem_len;
/* Cut out the ACPI_PCI hole */
if (mem_base <= guest_info->ram_size_below_4g &&
next_base > guest_info->ram_size_below_4g) {
mem_len -= next_base - guest_info->ram_size_below_4g;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
if (mem_len > 0) {
numamem = acpi_data_push(table_data, sizeof *numamem);
acpi_build_srat_memory(numamem, mem_base, mem_len, i-1, 1);
}
mem_base = 1ULL << 32;
mem_len = next_base - guest_info->ram_size_below_4g;
next_base += (1ULL << 32) - guest_info->ram_size_below_4g;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
numamem = acpi_data_push(table_data, sizeof *numamem);
acpi_build_srat_memory(numamem, mem_base, mem_len, i - 1, 1);
}
slots = (table_data->len - numa_start) / sizeof *numamem;
for (; slots < guest_info->numa_nodes + 2; slots++) {
numamem = acpi_data_push(table_data, sizeof *numamem);
acpi_build_srat_memory(numamem, 0, 0, 0, 0);
}
build_header(linker, table_data,
(void *)(table_data->data + srat_start),
"SRAT",
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
table_data->len - srat_start, 1);
}
static void
build_mcfg_q35(GArray *table_data, GArray *linker, AcpiMcfgInfo *info)
{
AcpiTableMcfg *mcfg;
const char *sig;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
int len = sizeof(*mcfg) + 1 * sizeof(mcfg->allocation[0]);
mcfg = acpi_data_push(table_data, len);
mcfg->allocation[0].address = cpu_to_le64(info->mcfg_base);
/* Only a single allocation so no need to play with segments */
mcfg->allocation[0].pci_segment = cpu_to_le16(0);
mcfg->allocation[0].start_bus_number = 0;
mcfg->allocation[0].end_bus_number = PCIE_MMCFG_BUS(info->mcfg_size - 1);
/* MCFG is used for ECAM which can be enabled or disabled by guest.
* To avoid table size changes (which create migration issues),
* always create the table even if there are no allocations,
* but set the signature to a reserved value in this case.
* ACPI spec requires OSPMs to ignore such tables.
*/
if (info->mcfg_base == PCIE_BASE_ADDR_UNMAPPED) {
/* Reserved signature: ignored by OSPM */
sig = "QEMU";
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
} else {
sig = "MCFG";
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
build_header(linker, table_data, (void *)mcfg, sig, len, 1);
}
static void
build_dsdt(GArray *table_data, GArray *linker, AcpiMiscInfo *misc)
{
AcpiTableHeader *dsdt;
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
assert(misc->dsdt_code && misc->dsdt_size);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
dsdt = acpi_data_push(table_data, misc->dsdt_size);
memcpy(dsdt, misc->dsdt_code, misc->dsdt_size);
memset(dsdt, 0, sizeof *dsdt);
build_header(linker, table_data, dsdt, "DSDT",
misc->dsdt_size, 1);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
/* Build final rsdt table */
static void
build_rsdt(GArray *table_data, GArray *linker, GArray *table_offsets)
{
AcpiRsdtDescriptorRev1 *rsdt;
size_t rsdt_len;
int i;
rsdt_len = sizeof(*rsdt) + sizeof(uint32_t) * table_offsets->len;
rsdt = acpi_data_push(table_data, rsdt_len);
memcpy(rsdt->table_offset_entry, table_offsets->data,
sizeof(uint32_t) * table_offsets->len);
for (i = 0; i < table_offsets->len; ++i) {
/* rsdt->table_offset_entry to be filled by Guest linker */
bios_linker_loader_add_pointer(linker,
ACPI_BUILD_TABLE_FILE,
ACPI_BUILD_TABLE_FILE,
table_data, &rsdt->table_offset_entry[i],
sizeof(uint32_t));
}
build_header(linker, table_data,
(void *)rsdt, "RSDT", rsdt_len, 1);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
}
static GArray *
build_rsdp(GArray *rsdp_table, GArray *linker, unsigned rsdt)
{
AcpiRsdpDescriptor *rsdp = acpi_data_push(rsdp_table, sizeof *rsdp);
bios_linker_loader_alloc(linker, ACPI_BUILD_RSDP_FILE, 1,
true /* fseg memory */);
memcpy(&rsdp->signature, "RSD PTR ", 8);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
memcpy(rsdp->oem_id, ACPI_BUILD_APPNAME6, 6);
rsdp->rsdt_physical_address = cpu_to_le32(rsdt);
/* Address to be filled by Guest linker */
bios_linker_loader_add_pointer(linker, ACPI_BUILD_RSDP_FILE,
ACPI_BUILD_TABLE_FILE,
rsdp_table, &rsdp->rsdt_physical_address,
sizeof rsdp->rsdt_physical_address);
rsdp->checksum = 0;
/* Checksum to be filled by Guest linker */
bios_linker_loader_add_checksum(linker, ACPI_BUILD_RSDP_FILE,
rsdp, rsdp, sizeof *rsdp, &rsdp->checksum);
return rsdp_table;
}
typedef
struct AcpiBuildTables {
GArray *table_data;
GArray *rsdp;
GArray *linker;
} AcpiBuildTables;
static inline void acpi_build_tables_init(AcpiBuildTables *tables)
{
tables->rsdp = g_array_new(false, true /* clear */, 1);
tables->table_data = g_array_new(false, true /* clear */, 1);
tables->linker = bios_linker_loader_init();
}
static inline void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre)
{
void *linker_data = bios_linker_loader_cleanup(tables->linker);
if (mfre) {
g_free(linker_data);
}
g_array_free(tables->rsdp, mfre);
g_array_free(tables->table_data, mfre);
}
typedef
struct AcpiBuildState {
/* Copy of table in RAM (for patching). */
uint8_t *table_ram;
uint32_t table_size;
/* Is table patched? */
uint8_t patched;
PcGuestInfo *guest_info;
} AcpiBuildState;
static bool acpi_get_mcfg(AcpiMcfgInfo *mcfg)
{
Object *pci_host;
QObject *o;
bool ambiguous;
pci_host = object_resolve_path_type("", TYPE_PCI_HOST_BRIDGE, &ambiguous);
g_assert(!ambiguous);
g_assert(pci_host);
o = object_property_get_qobject(pci_host, PCIE_HOST_MCFG_BASE, NULL);
if (!o) {
return false;
}
mcfg->mcfg_base = qint_get_int(qobject_to_qint(o));
qobject_decref(o);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
o = object_property_get_qobject(pci_host, PCIE_HOST_MCFG_SIZE, NULL);
assert(o);
mcfg->mcfg_size = qint_get_int(qobject_to_qint(o));
qobject_decref(o);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
return true;
}
static
void acpi_build(PcGuestInfo *guest_info, AcpiBuildTables *tables)
{
GArray *table_offsets;
unsigned facs, dsdt, rsdt;
AcpiCpuInfo cpu;
AcpiPmInfo pm;
AcpiMiscInfo misc;
AcpiMcfgInfo mcfg;
PcPciInfo pci;
uint8_t *u;
acpi_get_cpu_info(&cpu);
acpi_get_pm_info(&pm);
acpi_get_dsdt(&misc);
acpi_get_misc_info(&misc);
acpi_get_pci_info(&pci);
table_offsets = g_array_new(false, true /* clear */,
sizeof(uint32_t));
ACPI_BUILD_DPRINTF(3, "init ACPI tables\n");
bios_linker_loader_alloc(tables->linker, ACPI_BUILD_TABLE_FILE,
64 /* Ensure FACS is aligned */,
false /* high memory */);
/*
* FACS is pointed to by FADT.
* We place it first since it's the only table that has alignment
* requirements.
*/
facs = tables->table_data->len;
build_facs(tables->table_data, tables->linker, guest_info);
/* DSDT is pointed to by FADT */
dsdt = tables->table_data->len;
build_dsdt(tables->table_data, tables->linker, &misc);
/* ACPI tables pointed to by RSDT */
acpi_add_table(table_offsets, tables->table_data);
build_fadt(tables->table_data, tables->linker, &pm, facs, dsdt);
acpi_add_table(table_offsets, tables->table_data);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
build_ssdt(tables->table_data, tables->linker, &cpu, &pm, &misc, &pci,
guest_info);
acpi_add_table(table_offsets, tables->table_data);
build_madt(tables->table_data, tables->linker, &cpu, guest_info);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
if (misc.has_hpet) {
acpi_add_table(table_offsets, tables->table_data);
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
build_hpet(tables->table_data, tables->linker);
}
if (guest_info->numa_nodes) {
acpi_add_table(table_offsets, tables->table_data);
build_srat(tables->table_data, tables->linker, &cpu, guest_info);
}
if (acpi_get_mcfg(&mcfg)) {
acpi_add_table(table_offsets, tables->table_data);
build_mcfg_q35(tables->table_data, tables->linker, &mcfg);
}
/* Add tables supplied by user (if any) */
for (u = acpi_table_first(); u; u = acpi_table_next(u)) {
unsigned len = acpi_table_len(u);
acpi_add_table(table_offsets, tables->table_data);
g_array_append_vals(tables->table_data, u, len);
}
/* RSDT is pointed to by RSDP */
rsdt = tables->table_data->len;
build_rsdt(tables->table_data, tables->linker, table_offsets);
/* RSDP is in FSEG memory, so allocate it separately */
build_rsdp(tables->rsdp, tables->linker, rsdt);
/* We'll expose it all to Guest so align size to reduce
* chance of size changes.
* RSDP is small so it's easy to keep it immutable, no need to
* bother with alignment.
*/
acpi_align_size(tables->table_data, 0x1000);
acpi_align_size(tables->linker, 0x1000);
/* Cleanup memory that's no longer used. */
g_array_free(table_offsets, true);
}
static void acpi_build_update(void *build_opaque, uint32_t offset)
{
AcpiBuildState *build_state = build_opaque;
AcpiBuildTables tables;
/* No state to update or already patched? Nothing to do. */
if (!build_state || build_state->patched) {
return;
}
build_state->patched = 1;
acpi_build_tables_init(&tables);
acpi_build(build_state->guest_info, &tables);
assert(acpi_data_len(tables.table_data) == build_state->table_size);
memcpy(build_state->table_ram, tables.table_data->data,
build_state->table_size);
acpi_build_tables_cleanup(&tables, true);
}
static void acpi_build_reset(void *build_opaque)
{
AcpiBuildState *build_state = build_opaque;
build_state->patched = 0;
}
static void *acpi_add_rom_blob(AcpiBuildState *build_state, GArray *blob,
const char *name)
{
return rom_add_blob(name, blob->data, acpi_data_len(blob), -1, name,
acpi_build_update, build_state);
}
static const VMStateDescription vmstate_acpi_build = {
.name = "acpi_build",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT8(patched, AcpiBuildState),
VMSTATE_END_OF_LIST()
},
};
void acpi_setup(PcGuestInfo *guest_info)
{
AcpiBuildTables tables;
AcpiBuildState *build_state;
if (!guest_info->fw_cfg) {
ACPI_BUILD_DPRINTF(3, "No fw cfg. Bailing out.\n");
return;
}
if (!guest_info->has_acpi_build) {
ACPI_BUILD_DPRINTF(3, "ACPI build disabled. Bailing out.\n");
return;
}
if (!acpi_enabled) {
ACPI_BUILD_DPRINTF(3, "ACPI disabled. Bailing out.\n");
return;
}
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
build_state = g_malloc0(sizeof *build_state);
build_state->guest_info = guest_info;
acpi_set_pci_info();
i386: ACPI table generation code from seabios This adds C code for generating ACPI tables at runtime, imported from seabios git tree commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd Although ACPI tables come from a system BIOS on real hw, it makes sense that the ACPI tables are coupled with the virtual machine, since they have to abstract the x86 machine to the OS's. This is widely desired as a way to avoid the churn and proliferation of QEMU-specific interfaces associated with ACPI tables in bios code. Notes: As BIOS can reprogram devices prior to loading ACPI tables, we pre-format ACPI tables but defer loading hardware configuration there until tables are loaded. The code structure was intentionally kept as close to the seabios original as possible, to simplify comparison and making sure we didn't lose anything in translation. Minor code duplication results, to help ensure there are no functional regressions, I think it's better to merge it like this and do more code changes in follow-up patches. Cross-version compatibility concerns have been addressed: ACPI tables are exposed to guest as FW_CFG entries. When running with -M 1.5 and older, this patch disables ACPI table generation, and doesn't expose ACPI tables to guest. As table content is likely to change over time, the following measures are taken to simplify cross-version migration: - All tables besides the RSDP are packed in a single FW CFG entry. This entry size is currently 23K. We round it up to 64K to avoid too much churn there. - Tables are placed in special ROM blob (not mapped into guest memory) which is automatically migrated together with the guest, same as BIOS code. - Offsets where hardware configuration is loaded in ACPI tables are also migrated, this is in case future ACPI changes make us rearrange the tables in memory. This patch reuses some code from SeaBIOS, which was originally under LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This relicensing has been acked by all contributors that had contributed to the code since the v2->v3 relicense. ACKs approving the v2+ relicensing are listed below. The list might include ACKs from people not holding copyright on any parts of the reused code, but it's better to err on the side of caution and include them. Affected SeaBIOS files (GPLv2+ license headers added) <http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>: src/acpi-dsdt-cpu-hotplug.dsl src/acpi-dsdt-dbug.dsl src/acpi-dsdt-hpet.dsl src/acpi-dsdt-isa.dsl src/acpi-dsdt-pci-crs.dsl src/acpi.c src/acpi.h src/ssdt-misc.dsl src/ssdt-pcihp.dsl src/ssdt-proc.dsl tools/acpi_extract.py tools/acpi_extract_preprocess.py Each one of the listed people agreed to the following: > If you allow the use of your contribution in QEMU under the > terms of GPLv2 or later as proposed by this patch, > please respond to this mail including the line: > > Acked-by: Name <email address> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Jason Baron <jbaron@akamai.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Gleb Natapov <gleb@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Dave Frodin <dave.frodin@se-eng.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Kevin O'Connor <kevin@koconnor.net> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Magnus Christensson <magnus.christensson@intel.com> Acked-by: Hu Tao <hutao@cn.fujitsu.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Tested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-24 23:56:14 +08:00
acpi_build_tables_init(&tables);
acpi_build(build_state->guest_info, &tables);
/* Now expose it all to Guest */
build_state->table_ram = acpi_add_rom_blob(build_state, tables.table_data,
ACPI_BUILD_TABLE_FILE);
build_state->table_size = acpi_data_len(tables.table_data);
acpi_add_rom_blob(NULL, tables.linker, "etc/table-loader");
/*
* RSDP is small so it's easy to keep it immutable, no need to
* bother with ROM blobs.
*/
fw_cfg_add_file(guest_info->fw_cfg, ACPI_BUILD_RSDP_FILE,
tables.rsdp->data, acpi_data_len(tables.rsdp));
qemu_register_reset(acpi_build_reset, build_state);
acpi_build_reset(build_state);
vmstate_register(NULL, 0, &vmstate_acpi_build, build_state);
/* Cleanup tables but don't free the memory: we track it
* in build_state.
*/
acpi_build_tables_cleanup(&tables, false);
}