2017-07-29 06:46:05 +08:00
# See docs/devel/tracing.txt for syntax documentation.
2016-06-16 16:40:04 +08:00
2019-03-15 02:09:26 +08:00
# adb-kbd.c
2020-06-24 04:49:35 +08:00
adb_device_kbd_no_key(void) "Ignoring NO_KEY"
adb_device_kbd_writereg(int reg, uint8_t val) "reg %d val 0x%2.2x"
adb_device_kbd_readreg(int reg, uint8_t val0, uint8_t val1) "reg %d obuf[0] 0x%2.2x obuf[1] 0x%2.2x"
adb_device_kbd_request_change_addr(int devaddr) "change addr to 0x%x"
adb_device_kbd_request_change_addr_and_handler(int devaddr, int handler) "change addr and handler to 0x%x, 0x%x"
2018-01-26 17:20:29 +08:00
2019-03-15 02:09:26 +08:00
# adb-mouse.c
2020-06-24 04:49:35 +08:00
adb_device_mouse_flush(void) "flush"
adb_device_mouse_writereg(int reg, uint8_t val) "reg %d val 0x%2.2x"
adb_device_mouse_readreg(int reg, uint8_t val0, uint8_t val1) "reg %d obuf[0] 0x%2.2x obuf[1] 0x%2.2x"
adb_device_mouse_request_change_addr(int devaddr) "change addr to 0x%x"
adb_device_mouse_request_change_addr_and_handler(int devaddr, int handler) "change addr and handler to 0x%x, 0x%x"
2017-12-20 20:14:06 +08:00
2020-06-24 04:49:36 +08:00
# adb.c
adb_bus_request(uint8_t addr, const char *cmd, int size) "device 0x%x %s cmdsize=%d"
adb_bus_request_done(uint8_t addr, const char *cmd, int size) "device 0x%x %s replysize=%d"
adb_bus_autopoll_block(bool blocked) "blocked: %d"
adb_bus_autopoll_cb(uint16_t mask) "executing autopoll_cb with autopoll mask 0x%x"
adb_bus_autopoll_cb_done(uint16_t mask) "done executing autopoll_cb with autopoll mask 0x%x"
2019-03-15 02:09:26 +08:00
# pckbd.c
2018-10-16 19:22:32 +08:00
pckbd_kbd_read_data(uint32_t val) "0x%02x"
pckbd_kbd_read_status(int status) "0x%02x"
pckbd_outport_write(uint32_t val) "0x%02x"
pckbd_kbd_write_command(uint64_t val) "0x%02"PRIx64
pckbd_kbd_write_data(uint64_t val) "0x%02"PRIx64
2019-03-15 02:09:26 +08:00
# ps2.c
2017-10-19 22:28:40 +08:00
ps2_put_keycode(void *opaque, int keycode) "%p keycode 0x%02x"
ps2: fix scancodes sent for Alt-Print key combination (aka SysRq)
The 'Print' key is special in the AT set 1 / set 2 scancode definitions.
An unmodified 'Print' key is supposed to send
AT Set 1: e0 2a e0 37 (Down) e0 b7 e0 aa (Up)
AT Set 2: e0 12 e0 7c (Down) e0 f0 7c e0 f0 12 (Up)
which QEMU gets right. When pressed in combination with the 'Alt_L' or 'Alt_R'
keys (which signify SysRq), the scancodes are required to follow a different
scheme. With Alt_L, the expected sequences are
AT set 1: 38, 54 (Down) d4, b8 (Up)
AT set 2: 11, 84 (Down) f0 84, f0 11 (Up)
And with Alt_R
AT set 1: e0 38, 54 (Down) d4, e0 b8 (Up)
AT set 2: e0 11, 84 (Down) f0 84, f0 e0 11 (Up)
It is actually slightly more complicated than that, because (according results
of 'showkey -s', keyboards will in fact first release the currently pressed
modifier before sending the sequence above (which effectively re-presses &
then releases the modifier) and finally re-press the original modifier
afterwards. IOW, with Alt_L we need to send
AT set 1: b8, 38, 54 (Down) d4, b8, 38 (Up)
AT set 2: f0 11, 11, 84 (Down) f0 84, f0 11, 11 (Up)
And with Alt_R
AT set 1: e0 b8, e0 38, 54 (Down) d4, e0 b8, e0 38 (Up)
AT set 2: e0 f0 11, e0 11, 84 (Down) f0 84, e0 f0 11, e0 11 (Up)
The AT set 3 scancodes have no special handling for Alt-Print.
Rather than fixing the handling of the 'print' key in the ps2 driver to consider
the Alt modifiers, way back, a patch was commited that defined an extra 'sysrq'
key name:
commit f2289cb6924afc97b2a75d21bfc9217024d11741
Author: balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>
Date: Wed Jun 4 10:14:16 2008 +0000
Add sysrq to key names known by "sendkey".
Adding sysrq keycode to the table enabling running sysrq debugging in
the guest via the monitor sendkey command, like:
(qemu) sendkey alt-sysrq-t
Tested on x86-64 target and Linux guest.
Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
With this patch QEMU would send
AT set 1: 38, 54 (Down) d4, b8 (Up)
AT set 2: 11, 84 (Down) f0 84, f0 11 (Up)
but this doesn't match what actual real keyboards send, as it is not releasing
the original modifier & pressing it again afterwards. In addition the original
problem remains, and a new problem was added:
- The sequence 'alt-print-t' is still broken, acting as if 'print-t' was
requested
- The sequence 'sysrq-t' is broken, injecting an undefine scancode sequence
tot he guest os (bare 0x54)
To deal with this mess we make these changes to the ps2 code, so that we track
the state of modifier keys (Alt, Shift, Ctrl - both left & right). Then we can
vary what scancodes are sent for Q_KEY_CODE_PRINT according to the Alt key
modifier state
Interestingly, it appears that of operating systems I've checked (Linux, FreeBSD
and OpenSolaris), none of them actually bother to validate the full sequences
for a unmodified 'Print' key. They all just ignore the leading "e0 2a" and
trigger based off "e0 37" alone. The latter two byte sequence is what keyboards
send with 'Print' is combined with 'Shift' or 'Ctrl' modifiers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-10-19 22:28:43 +08:00
ps2_keyboard_event(void *opaque, int qcode, int down, unsigned int modifier, unsigned int modifiers) "%p qcode %d down %d modifier 0x%x modifiers 0x%x"
2016-06-16 16:40:04 +08:00
ps2_read_data(void *opaque) "%p"
ps2_set_ledstate(void *s, int ledstate) "%p ledstate %d"
ps2_reset_keyboard(void *s) "%p"
ps2_write_keyboard(void *opaque, int val) "%p val %d"
ps2_keyboard_set_translation(void *opaque, int mode) "%p mode %d"
2017-08-01 00:01:33 +08:00
ps2_mouse_send_packet(void *s, int dx1, int dy1, int dz1, int b) "%p x %d y %d z %d bs 0x%x"
2016-06-16 16:40:04 +08:00
ps2_mouse_fake_event(void *opaque) "%p"
ps2_write_mouse(void *opaque, int val) "%p val %d"
ps2_kbd_reset(void *opaque) "%p"
ps2_mouse_reset(void *opaque) "%p"
ps2_kbd_init(void *s) "%p"
ps2_mouse_init(void *s) "%p"
2019-03-15 02:09:26 +08:00
# milkymist-softusb.c
trace-events: fix code style: print 0x before hex numbers
The only exception are groups of numers separated by symbols
'.', ' ', ':', '/', like 'ab.09.7d'.
This patch is made by the following:
> find . -name trace-events | xargs python script.py
where script.py is the following python script:
=========================
#!/usr/bin/env python
import sys
import re
import fileinput
rhex = '%[-+ *.0-9]*(?:[hljztL]|ll|hh)?(?:x|X|"\s*PRI[xX][^"]*"?)'
rgroup = re.compile('((?:' + rhex + '[.:/ ])+' + rhex + ')')
rbad = re.compile('(?<!0x)' + rhex)
files = sys.argv[1:]
for fname in files:
for line in fileinput.input(fname, inplace=True):
arr = re.split(rgroup, line)
for i in range(0, len(arr), 2):
arr[i] = re.sub(rbad, '0x\g<0>', arr[i])
sys.stdout.write(''.join(arr))
=========================
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-id: 20170731160135.12101-5-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-08-01 00:01:35 +08:00
milkymist_softusb_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
milkymist_softusb_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
2016-06-16 16:40:04 +08:00
milkymist_softusb_mevt(uint8_t m) "m %d"
milkymist_softusb_kevt(uint8_t m) "m %d"
milkymist_softusb_pulse_irq(void) "Pulse IRQ"
2016-06-23 17:51:35 +08:00
2019-03-15 02:09:26 +08:00
# hid.c
2016-06-23 17:51:35 +08:00
hid_kbd_queue_full(void) "queue full"
2017-03-30 22:22:55 +08:00
hid_kbd_queue_empty(void) "queue empty"
2016-06-23 17:51:35 +08:00
2019-03-15 02:09:26 +08:00
# tsc2005.c
2018-06-22 01:12:52 +08:00
tsc2005_sense(const char *state) "touchscreen sense %s"
2019-03-15 02:09:29 +08:00
# virtio-input.c
2016-06-23 17:51:35 +08:00
virtio_input_queue_full(void) "queue full"
2019-12-21 05:15:10 +08:00
# lasips2.c
lasips2_reg_read(unsigned int size, int id, uint64_t addr, const char *name, uint64_t val) "%u %d addr 0x%"PRIx64 "%s -> 0x%"PRIx64
lasips2_reg_write(unsigned int size, int id, uint64_t addr, const char *name, uint64_t val) "%u %d addr 0x%"PRIx64 "%s <- 0x%"PRIx64
lasips2_intr(unsigned int val) "%d"
