qemu/hw/ppc/trace-events

92 lines
6.7 KiB
Plaintext
Raw Normal View History

# See docs/tracing.txt for syntax documentation.
# hw/ppc/spapr_pci.c
spapr_pci_msi(const char *msg, uint32_t ca) "%s (cfg=%x)"
spapr_pci_msi_setup(const char *name, unsigned vector, uint64_t addr) "dev\"%s\" vector %u, addr=%"PRIx64
spapr_pci_rtas_ibm_change_msi(unsigned cfg, unsigned func, unsigned req, unsigned first) "cfgaddr %x func %u, requested %u, first irq %u"
spapr_pci_rtas_ibm_query_interrupt_source_number(unsigned ioa, unsigned intr) "queries for #%u, IRQ%u"
spapr_pci_msi_write(uint64_t addr, uint64_t data, uint32_t dt_irq) "@%"PRIx64"<=%"PRIx64" IRQ %u"
spapr_pci_lsi_set(const char *busname, int pin, uint32_t irq) "%s PIN%d IRQ %u"
spapr_pci_msi_retry(unsigned config_addr, unsigned req_num, unsigned max_irqs) "Guest device at %x asked %u, have only %u"
# hw/ppc/spapr.c
spapr_cas_failed(unsigned long n) "DT diff buffer is too small: %ld bytes"
spapr_cas_continue(unsigned long n) "Copy changes to the guest: %ld bytes"
# hw/ppc/spapr_hcall.c
spapr_cas_pvr_try(uint32_t pvr) "%x"
spapr_cas_pvr(uint32_t cur_pvr, bool explicit_match, uint32_t new_pvr) "current=%x, explicit_match=%u, new=%x"
# hw/ppc/spapr_iommu.c
spapr_iommu_put(uint64_t liobn, uint64_t ioba, uint64_t tce, uint64_t ret) "liobn=%"PRIx64" ioba=0x%"PRIx64" tce=0x%"PRIx64" ret=%"PRId64
spapr_iommu_get(uint64_t liobn, uint64_t ioba, uint64_t ret, uint64_t tce) "liobn=%"PRIx64" ioba=0x%"PRIx64" ret=%"PRId64" tce=0x%"PRIx64
spapr_iommu_indirect(uint64_t liobn, uint64_t ioba, uint64_t tce, uint64_t iobaN, uint64_t tceN, uint64_t ret) "liobn=%"PRIx64" ioba=0x%"PRIx64" tcelist=0x%"PRIx64" iobaN=0x%"PRIx64" tceN=0x%"PRIx64" ret=%"PRId64
spapr_iommu_stuff(uint64_t liobn, uint64_t ioba, uint64_t tce_value, uint64_t npages, uint64_t ret) "liobn=%"PRIx64" ioba=0x%"PRIx64" tcevalue=0x%"PRIx64" npages=%"PRId64" ret=%"PRId64
spapr_iommu_pci_put(uint64_t liobn, uint64_t ioba, uint64_t tce, uint64_t ret) "liobn=%"PRIx64" ioba=0x%"PRIx64" tce=0x%"PRIx64" ret=%"PRId64
spapr_iommu_pci_get(uint64_t liobn, uint64_t ioba, uint64_t ret, uint64_t tce) "liobn=%"PRIx64" ioba=0x%"PRIx64" ret=%"PRId64" tce=0x%"PRIx64
spapr_iommu_pci_indirect(uint64_t liobn, uint64_t ioba, uint64_t tce, uint64_t iobaN, uint64_t tceN, uint64_t ret) "liobn=%"PRIx64" ioba=0x%"PRIx64" tcelist=0x%"PRIx64" iobaN=0x%"PRIx64" tceN=0x%"PRIx64" ret=%"PRId64
spapr_iommu_pci_stuff(uint64_t liobn, uint64_t ioba, uint64_t tce_value, uint64_t npages, uint64_t ret) "liobn=%"PRIx64" ioba=0x%"PRIx64" tcevalue=0x%"PRIx64" npages=%"PRId64" ret=%"PRId64
spapr_iommu_xlate(uint64_t liobn, uint64_t ioba, uint64_t tce, unsigned perm, unsigned pgsize) "liobn=%"PRIx64" 0x%"PRIx64" -> 0x%"PRIx64" perm=%u mask=%x"
spapr_iommu_new_table(uint64_t liobn, void *table, int fd) "liobn=%"PRIx64" table=%p fd=%d"
spapr_iommu_pre_save(uint64_t liobn, uint32_t nb, uint64_t offs, uint32_t ps) "liobn=%"PRIx64" %"PRIx32" bus_offset=%"PRIx64" ps=%"PRIu32
spapr_iommu_post_load(uint64_t liobn, uint32_t pre_nb, uint32_t post_nb, uint64_t offs, uint32_t ps) "liobn=%"PRIx64" %"PRIx32" => %"PRIx32" bus_offset=%"PRIx64" ps=%"PRIu32
spapr_pci/spapr_pci_vfio: Support Dynamic DMA Windows (DDW) This adds support for Dynamic DMA Windows (DDW) option defined by the SPAPR specification which allows to have additional DMA window(s) The "ddw" property is enabled by default on a PHB but for compatibility the pseries-2.6 machine and older disable it. This also creates a single DMA window for the older machines to maintain backward migration. This implements DDW for PHB with emulated and VFIO devices. The host kernel support is required. The advertised IOMMU page sizes are 4K and 64K; 16M pages are supported but not advertised by default, in order to enable them, the user has to specify "pgsz" property for PHB and enable huge pages for RAM. The existing linux guests try creating one additional huge DMA window with 64K or 16MB pages and map the entire guest RAM to. If succeeded, the guest switches to dma_direct_ops and never calls TCE hypercalls (H_PUT_TCE,...) again. This enables VFIO devices to use the entire RAM and not waste time on map/unmap later. This adds a "dma64_win_addr" property which is a bus address for the 64bit window and by default set to 0x800.0000.0000.0000 as this is what the modern POWER8 hardware uses and this allows having emulated and VFIO devices on the same bus. This adds 4 RTAS handlers: * ibm,query-pe-dma-window * ibm,create-pe-dma-window * ibm,remove-pe-dma-window * ibm,reset-pe-dma-window These are registered from type_init() callback. These RTAS handlers are implemented in a separate file to avoid polluting spapr_iommu.c with PCI. This changes sPAPRPHBState::dma_liobn to an array to allow 2 LIOBNs and updates all references to dma_liobn. However this does not add 64bit LIOBN to the migration stream as in fact even 32bit LIOBN is rather pointless there (as it is a PHB property and the management software can/should pass LIOBNs via CLI) but we keep it for the backward migration support. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-07-04 11:33:07 +08:00
spapr_iommu_ddw_query(uint64_t buid, uint32_t cfgaddr, unsigned wa, uint64_t win_size, uint32_t pgmask) "buid=%"PRIx64" addr=%"PRIx32", %u windows available, max window size=%"PRIx64", mask=%"PRIx32
spapr_iommu_ddw_create(uint64_t buid, uint32_t cfgaddr, uint64_t pg_size, uint64_t req_size, uint64_t start, uint32_t liobn) "buid=%"PRIx64" addr=%"PRIx32", page size=0x%"PRIx64", requested=0x%"PRIx64", start addr=%"PRIx64", liobn=%"PRIx32
spapr_iommu_ddw_remove(uint32_t liobn) "liobn=%"PRIx32
spapr_iommu_ddw_reset(uint64_t buid, uint32_t cfgaddr) "buid=%"PRIx64" addr=%"PRIx32
# hw/ppc/spapr_drc.c
spapr_drc_set_isolation_state(uint32_t index, int state) "drc: 0x%"PRIx32", state: %"PRIx32
spapr_drc_set_isolation_state_finalizing(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_set_isolation_state_deferring(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_set_indicator_state(uint32_t index, int state) "drc: 0x%"PRIx32", state: 0x%x"
spapr_drc_set_allocation_state(uint32_t index, int state) "drc: 0x%"PRIx32", state: 0x%x"
spapr_drc_set_allocation_state_finalizing(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_set_configured(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_set_configured_skipping(uint32_t index) "drc: 0x%"PRIx32", isolated device"
spapr_drc_entity_sense(uint32_t index, int state) "drc: 0x%"PRIx32", state: 0x%x"
spapr_drc_attach(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_detach(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_awaiting_isolated(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_awaiting_unusable(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_awaiting_allocation(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_reset(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_realize(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_realize_child(uint32_t index, char *childname) "drc: 0x%"PRIx32", child name: %s"
spapr_drc_realize_complete(uint32_t index) "drc: 0x%"PRIx32
spapr_drc_unrealize(uint32_t index) "drc: 0x%"PRIx32
# hw/ppc/spapr_rtas.c
spapr_rtas_set_indicator_invalid(uint32_t index) "sensor index: 0x%"PRIx32
spapr_rtas_set_indicator_not_supported(uint32_t index, uint32_t type) "sensor index: 0x%"PRIx32", type: %"PRIu32
spapr_rtas_get_sensor_state_not_supported(uint32_t index, uint32_t type) "sensor index: 0x%"PRIx32", type: %"PRIu32
spapr_rtas_get_sensor_state_invalid(uint32_t index) "sensor index: 0x%"PRIx32
spapr_rtas_ibm_configure_connector_invalid(uint32_t index) "DRC index: 0x%"PRIx32
spapr_rtas_ibm_configure_connector_missing_fdt(uint32_t index) "DRC index: 0x%"PRIx32
# hw/ppc/spapr_vio.c
spapr_vio_h_reg_crq(uint64_t reg, uint64_t queue_addr, uint64_t queue_len) "CRQ for dev 0x%" PRIx64 " registered at 0x%" PRIx64 "/0x%" PRIx64
spapr_vio_free_crq(uint32_t reg) "CRQ for dev 0x%" PRIx32 " freed"
# hw/ppc/ppc.c
ppc_tb_adjust(uint64_t offs1, uint64_t offs2, int64_t diff, int64_t seconds) "adjusted from 0x%"PRIx64" to 0x%"PRIx64", diff %"PRId64" (%"PRId64"s)"
# hw/ppc/prep.c
prep_io_800_writeb(uint32_t addr, uint32_t val) "0x%08" PRIx32 " => 0x%02" PRIx32
prep_io_800_readb(uint32_t addr, uint32_t retval) "0x%08" PRIx32 " <= 0x%02" PRIx32
# hw/ppc/prep_systemio.c
prep_systemio_read(uint32_t addr, uint32_t val) "read addr=%x val=%x"
prep_systemio_write(uint32_t addr, uint32_t val) "write addr=%x val=%x"
# hw/ppc/rs6000_mc.c
rs6000mc_id_read(uint32_t addr, uint32_t val) "read addr=%x val=%x"
rs6000mc_presence_read(uint32_t addr, uint32_t val) "read addr=%x val=%x"
rs6000mc_size_read(uint32_t addr, uint32_t val) "read addr=%x val=%x"
rs6000mc_size_write(uint32_t addr, uint32_t val) "write addr=%x val=%x"
rs6000mc_parity_read(uint32_t addr, uint32_t val) "read addr=%x val=%x"
# hw/ppc/mac_newworld.c
mac99_uninorth_write(uint64_t addr, uint64_t value) "addr=0x%" PRIx64 " val=0x%"PRIx64
mac99_uninorth_read(uint64_t addr, uint64_t value) "addr=0x%" PRIx64 " val=0x%"PRIx64