qemu/hw/tcx.c

732 lines
20 KiB
C
Raw Normal View History

/*
* QEMU TCX Frame buffer
*
* Copyright (c) 2003-2005 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "console.h"
#include "pixel_ops.h"
#include "sysbus.h"
#include "qdev-addr.h"
#define MAXX 1024
#define MAXY 768
#define TCX_DAC_NREGS 16
#define TCX_THC_NREGS_8 0x081c
#define TCX_THC_NREGS_24 0x1000
#define TCX_TEC_NREGS 0x1000
typedef struct TCXState {
SysBusDevice busdev;
target_phys_addr_t addr;
DisplayState *ds;
uint8_t *vram;
uint32_t *vram24, *cplane;
MemoryRegion vram_mem;
MemoryRegion vram_8bit;
MemoryRegion vram_24bit;
MemoryRegion vram_cplane;
MemoryRegion dac;
MemoryRegion tec;
MemoryRegion thc24;
MemoryRegion thc8;
ram_addr_t vram24_offset, cplane_offset;
uint32_t vram_size;
uint32_t palette[256];
uint8_t r[256], g[256], b[256];
uint16_t width, height, depth;
uint8_t dac_index, dac_state;
} TCXState;
static void tcx_screen_dump(void *opaque, const char *filename, bool cswitch,
Error **errp);
static void tcx24_screen_dump(void *opaque, const char *filename, bool cswitch,
Error **errp);
static void tcx_set_dirty(TCXState *s)
{
memory_region_set_dirty(&s->vram_mem, 0, MAXX * MAXY);
}
static void tcx24_set_dirty(TCXState *s)
{
memory_region_set_dirty(&s->vram_mem, s->vram24_offset, MAXX * MAXY * 4);
memory_region_set_dirty(&s->vram_mem, s->cplane_offset, MAXX * MAXY * 4);
}
static void update_palette_entries(TCXState *s, int start, int end)
{
int i;
for(i = start; i < end; i++) {
switch(ds_get_bits_per_pixel(s->ds)) {
default:
case 8:
s->palette[i] = rgb_to_pixel8(s->r[i], s->g[i], s->b[i]);
break;
case 15:
s->palette[i] = rgb_to_pixel15(s->r[i], s->g[i], s->b[i]);
break;
case 16:
s->palette[i] = rgb_to_pixel16(s->r[i], s->g[i], s->b[i]);
break;
case 32:
DisplayAllocator interface (Stefano Stabellini) Hi all, this patch adds a DisplayAllocator interface that allows display frontends (sdl in particular) to provide a preallocated display buffer for the graphical backend to use. Whenever a graphical backend cannot use qemu_create_displaysurface_from because its own internal pixel format cannot be exported directly (text mode or graphical mode with color depth 8 or 24), it creates another display buffer in memory using qemu_create_displaysurface and does the conversion. This new buffer needs to be blitted into the sdl surface buffer every time we need to update portions of the screen. We can avoid this using the DisplayAllocator interace: sdl provides its own implementation of qemu_create_displaysurface, giving back the sdl surface buffer directly (as we used to do before the DisplayState changes). Since the buffer returned by sdl could be in bgr format we need to put back in the handlers of that case. This approach is good if the two following conditions are true: 1) the sdl surface is a software surface that resides in main memory; 2) the host display color depth is either 16 or 32 bpp. If first condition is false we can have bad performances using sdl and vnc together. If the second condition is false performances are certainly not going to improve but they shouldn't get worse either. The first condition is always true, at least on linux/X11 systems; but I believe is true also on other platforms. The second condition is true in the vast majority of the cases. This patch should also have the good side effect of solving the sdl 2D slowness malc was reporting on MacOS, because SDL_BlitSurface is not going to be called anymore when the guest is in text mode or 24bpp. However the root problem is still present so I suspect we may still see some slowness on MacOS when the guest is in 32 or 16 bpp. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6839 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13 23:02:13 +08:00
if (is_surface_bgr(s->ds->surface))
s->palette[i] = rgb_to_pixel32bgr(s->r[i], s->g[i], s->b[i]);
else
s->palette[i] = rgb_to_pixel32(s->r[i], s->g[i], s->b[i]);
break;
}
}
if (s->depth == 24) {
tcx24_set_dirty(s);
} else {
tcx_set_dirty(s);
}
}
static void tcx_draw_line32(TCXState *s1, uint8_t *d,
const uint8_t *s, int width)
{
int x;
uint8_t val;
uint32_t *p = (uint32_t *)d;
for(x = 0; x < width; x++) {
val = *s++;
*p++ = s1->palette[val];
}
}
static void tcx_draw_line16(TCXState *s1, uint8_t *d,
const uint8_t *s, int width)
{
int x;
uint8_t val;
uint16_t *p = (uint16_t *)d;
for(x = 0; x < width; x++) {
val = *s++;
*p++ = s1->palette[val];
}
}
static void tcx_draw_line8(TCXState *s1, uint8_t *d,
const uint8_t *s, int width)
{
int x;
uint8_t val;
for(x = 0; x < width; x++) {
val = *s++;
*d++ = s1->palette[val];
}
}
/*
XXX Could be much more optimal:
* detect if line/page/whole screen is in 24 bit mode
* if destination is also BGR, use memcpy
*/
static inline void tcx24_draw_line32(TCXState *s1, uint8_t *d,
const uint8_t *s, int width,
const uint32_t *cplane,
const uint32_t *s24)
{
DisplayAllocator interface (Stefano Stabellini) Hi all, this patch adds a DisplayAllocator interface that allows display frontends (sdl in particular) to provide a preallocated display buffer for the graphical backend to use. Whenever a graphical backend cannot use qemu_create_displaysurface_from because its own internal pixel format cannot be exported directly (text mode or graphical mode with color depth 8 or 24), it creates another display buffer in memory using qemu_create_displaysurface and does the conversion. This new buffer needs to be blitted into the sdl surface buffer every time we need to update portions of the screen. We can avoid this using the DisplayAllocator interace: sdl provides its own implementation of qemu_create_displaysurface, giving back the sdl surface buffer directly (as we used to do before the DisplayState changes). Since the buffer returned by sdl could be in bgr format we need to put back in the handlers of that case. This approach is good if the two following conditions are true: 1) the sdl surface is a software surface that resides in main memory; 2) the host display color depth is either 16 or 32 bpp. If first condition is false we can have bad performances using sdl and vnc together. If the second condition is false performances are certainly not going to improve but they shouldn't get worse either. The first condition is always true, at least on linux/X11 systems; but I believe is true also on other platforms. The second condition is true in the vast majority of the cases. This patch should also have the good side effect of solving the sdl 2D slowness malc was reporting on MacOS, because SDL_BlitSurface is not going to be called anymore when the guest is in text mode or 24bpp. However the root problem is still present so I suspect we may still see some slowness on MacOS when the guest is in 32 or 16 bpp. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6839 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13 23:02:13 +08:00
int x, bgr, r, g, b;
uint8_t val, *p8;
uint32_t *p = (uint32_t *)d;
uint32_t dval;
DisplayAllocator interface (Stefano Stabellini) Hi all, this patch adds a DisplayAllocator interface that allows display frontends (sdl in particular) to provide a preallocated display buffer for the graphical backend to use. Whenever a graphical backend cannot use qemu_create_displaysurface_from because its own internal pixel format cannot be exported directly (text mode or graphical mode with color depth 8 or 24), it creates another display buffer in memory using qemu_create_displaysurface and does the conversion. This new buffer needs to be blitted into the sdl surface buffer every time we need to update portions of the screen. We can avoid this using the DisplayAllocator interace: sdl provides its own implementation of qemu_create_displaysurface, giving back the sdl surface buffer directly (as we used to do before the DisplayState changes). Since the buffer returned by sdl could be in bgr format we need to put back in the handlers of that case. This approach is good if the two following conditions are true: 1) the sdl surface is a software surface that resides in main memory; 2) the host display color depth is either 16 or 32 bpp. If first condition is false we can have bad performances using sdl and vnc together. If the second condition is false performances are certainly not going to improve but they shouldn't get worse either. The first condition is always true, at least on linux/X11 systems; but I believe is true also on other platforms. The second condition is true in the vast majority of the cases. This patch should also have the good side effect of solving the sdl 2D slowness malc was reporting on MacOS, because SDL_BlitSurface is not going to be called anymore when the guest is in text mode or 24bpp. However the root problem is still present so I suspect we may still see some slowness on MacOS when the guest is in 32 or 16 bpp. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6839 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13 23:02:13 +08:00
bgr = is_surface_bgr(s1->ds->surface);
for(x = 0; x < width; x++, s++, s24++) {
if ((be32_to_cpu(*cplane++) & 0xff000000) == 0x03000000) {
// 24-bit direct, BGR order
p8 = (uint8_t *)s24;
p8++;
b = *p8++;
g = *p8++;
r = *p8;
DisplayAllocator interface (Stefano Stabellini) Hi all, this patch adds a DisplayAllocator interface that allows display frontends (sdl in particular) to provide a preallocated display buffer for the graphical backend to use. Whenever a graphical backend cannot use qemu_create_displaysurface_from because its own internal pixel format cannot be exported directly (text mode or graphical mode with color depth 8 or 24), it creates another display buffer in memory using qemu_create_displaysurface and does the conversion. This new buffer needs to be blitted into the sdl surface buffer every time we need to update portions of the screen. We can avoid this using the DisplayAllocator interace: sdl provides its own implementation of qemu_create_displaysurface, giving back the sdl surface buffer directly (as we used to do before the DisplayState changes). Since the buffer returned by sdl could be in bgr format we need to put back in the handlers of that case. This approach is good if the two following conditions are true: 1) the sdl surface is a software surface that resides in main memory; 2) the host display color depth is either 16 or 32 bpp. If first condition is false we can have bad performances using sdl and vnc together. If the second condition is false performances are certainly not going to improve but they shouldn't get worse either. The first condition is always true, at least on linux/X11 systems; but I believe is true also on other platforms. The second condition is true in the vast majority of the cases. This patch should also have the good side effect of solving the sdl 2D slowness malc was reporting on MacOS, because SDL_BlitSurface is not going to be called anymore when the guest is in text mode or 24bpp. However the root problem is still present so I suspect we may still see some slowness on MacOS when the guest is in 32 or 16 bpp. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6839 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13 23:02:13 +08:00
if (bgr)
dval = rgb_to_pixel32bgr(r, g, b);
else
dval = rgb_to_pixel32(r, g, b);
} else {
val = *s;
dval = s1->palette[val];
}
*p++ = dval;
}
}
static inline int check_dirty(TCXState *s, ram_addr_t page, ram_addr_t page24,
ram_addr_t cpage)
{
int ret;
ret = memory_region_get_dirty(&s->vram_mem, page, TARGET_PAGE_SIZE,
DIRTY_MEMORY_VGA);
ret |= memory_region_get_dirty(&s->vram_mem, page24, TARGET_PAGE_SIZE * 4,
DIRTY_MEMORY_VGA);
ret |= memory_region_get_dirty(&s->vram_mem, cpage, TARGET_PAGE_SIZE * 4,
DIRTY_MEMORY_VGA);
return ret;
}
static inline void reset_dirty(TCXState *ts, ram_addr_t page_min,
ram_addr_t page_max, ram_addr_t page24,
ram_addr_t cpage)
{
memory_region_reset_dirty(&ts->vram_mem,
page_min, page_max + TARGET_PAGE_SIZE,
DIRTY_MEMORY_VGA);
memory_region_reset_dirty(&ts->vram_mem,
page24 + page_min * 4,
page24 + page_max * 4 + TARGET_PAGE_SIZE,
DIRTY_MEMORY_VGA);
memory_region_reset_dirty(&ts->vram_mem,
cpage + page_min * 4,
cpage + page_max * 4 + TARGET_PAGE_SIZE,
DIRTY_MEMORY_VGA);
}
/* Fixed line length 1024 allows us to do nice tricks not possible on
VGA... */
static void tcx_update_display(void *opaque)
{
TCXState *ts = opaque;
ram_addr_t page, page_min, page_max;
int y, y_start, dd, ds;
uint8_t *d, *s;
void (*f)(TCXState *s1, uint8_t *dst, const uint8_t *src, int width);
if (ds_get_bits_per_pixel(ts->ds) == 0)
return;
page = 0;
y_start = -1;
2009-04-28 02:10:37 +08:00
page_min = -1;
page_max = 0;
d = ds_get_data(ts->ds);
s = ts->vram;
dd = ds_get_linesize(ts->ds);
ds = 1024;
switch (ds_get_bits_per_pixel(ts->ds)) {
case 32:
f = tcx_draw_line32;
break;
case 15:
case 16:
f = tcx_draw_line16;
break;
default:
case 8:
f = tcx_draw_line8;
break;
case 0:
return;
}
for(y = 0; y < ts->height; y += 4, page += TARGET_PAGE_SIZE) {
if (memory_region_get_dirty(&ts->vram_mem, page, TARGET_PAGE_SIZE,
DIRTY_MEMORY_VGA)) {
if (y_start < 0)
y_start = y;
if (page < page_min)
page_min = page;
if (page > page_max)
page_max = page;
f(ts, d, s, ts->width);
d += dd;
s += ds;
f(ts, d, s, ts->width);
d += dd;
s += ds;
f(ts, d, s, ts->width);
d += dd;
s += ds;
f(ts, d, s, ts->width);
d += dd;
s += ds;
} else {
if (y_start >= 0) {
/* flush to display */
dpy_update(ts->ds, 0, y_start,
ts->width, y - y_start);
y_start = -1;
}
d += dd * 4;
s += ds * 4;
}
}
if (y_start >= 0) {
/* flush to display */
dpy_update(ts->ds, 0, y_start,
ts->width, y - y_start);
}
/* reset modified pages */
2009-04-28 02:10:37 +08:00
if (page_max >= page_min) {
memory_region_reset_dirty(&ts->vram_mem,
page_min, page_max + TARGET_PAGE_SIZE,
DIRTY_MEMORY_VGA);
}
}
static void tcx24_update_display(void *opaque)
{
TCXState *ts = opaque;
ram_addr_t page, page_min, page_max, cpage, page24;
int y, y_start, dd, ds;
uint8_t *d, *s;
uint32_t *cptr, *s24;
if (ds_get_bits_per_pixel(ts->ds) != 32)
return;
page = 0;
page24 = ts->vram24_offset;
cpage = ts->cplane_offset;
y_start = -1;
2009-04-28 02:10:37 +08:00
page_min = -1;
page_max = 0;
d = ds_get_data(ts->ds);
s = ts->vram;
s24 = ts->vram24;
cptr = ts->cplane;
dd = ds_get_linesize(ts->ds);
ds = 1024;
for(y = 0; y < ts->height; y += 4, page += TARGET_PAGE_SIZE,
page24 += TARGET_PAGE_SIZE, cpage += TARGET_PAGE_SIZE) {
if (check_dirty(ts, page, page24, cpage)) {
if (y_start < 0)
y_start = y;
if (page < page_min)
page_min = page;
if (page > page_max)
page_max = page;
tcx24_draw_line32(ts, d, s, ts->width, cptr, s24);
d += dd;
s += ds;
cptr += ds;
s24 += ds;
tcx24_draw_line32(ts, d, s, ts->width, cptr, s24);
d += dd;
s += ds;
cptr += ds;
s24 += ds;
tcx24_draw_line32(ts, d, s, ts->width, cptr, s24);
d += dd;
s += ds;
cptr += ds;
s24 += ds;
tcx24_draw_line32(ts, d, s, ts->width, cptr, s24);
d += dd;
s += ds;
cptr += ds;
s24 += ds;
} else {
if (y_start >= 0) {
/* flush to display */
dpy_update(ts->ds, 0, y_start,
ts->width, y - y_start);
y_start = -1;
}
d += dd * 4;
s += ds * 4;
cptr += ds * 4;
s24 += ds * 4;
}
}
if (y_start >= 0) {
/* flush to display */
dpy_update(ts->ds, 0, y_start,
ts->width, y - y_start);
}
/* reset modified pages */
2009-04-28 02:10:37 +08:00
if (page_max >= page_min) {
reset_dirty(ts, page_min, page_max, page24, cpage);
}
}
static void tcx_invalidate_display(void *opaque)
{
TCXState *s = opaque;
tcx_set_dirty(s);
qemu_console_resize(s->ds, s->width, s->height);
}
static void tcx24_invalidate_display(void *opaque)
{
TCXState *s = opaque;
tcx_set_dirty(s);
tcx24_set_dirty(s);
qemu_console_resize(s->ds, s->width, s->height);
}
static int vmstate_tcx_post_load(void *opaque, int version_id)
{
TCXState *s = opaque;
update_palette_entries(s, 0, 256);
if (s->depth == 24) {
tcx24_set_dirty(s);
} else {
tcx_set_dirty(s);
}
return 0;
}
static const VMStateDescription vmstate_tcx = {
.name ="tcx",
.version_id = 4,
.minimum_version_id = 4,
.minimum_version_id_old = 4,
.post_load = vmstate_tcx_post_load,
.fields = (VMStateField []) {
VMSTATE_UINT16(height, TCXState),
VMSTATE_UINT16(width, TCXState),
VMSTATE_UINT16(depth, TCXState),
VMSTATE_BUFFER(r, TCXState),
VMSTATE_BUFFER(g, TCXState),
VMSTATE_BUFFER(b, TCXState),
VMSTATE_UINT8(dac_index, TCXState),
VMSTATE_UINT8(dac_state, TCXState),
VMSTATE_END_OF_LIST()
}
};
static void tcx_reset(DeviceState *d)
{
TCXState *s = container_of(d, TCXState, busdev.qdev);
/* Initialize palette */
memset(s->r, 0, 256);
memset(s->g, 0, 256);
memset(s->b, 0, 256);
s->r[255] = s->g[255] = s->b[255] = 255;
update_palette_entries(s, 0, 256);
memset(s->vram, 0, MAXX*MAXY);
memory_region_reset_dirty(&s->vram_mem, 0, MAXX * MAXY * (1 + 4 + 4),
DIRTY_MEMORY_VGA);
s->dac_index = 0;
s->dac_state = 0;
}
static uint64_t tcx_dac_readl(void *opaque, target_phys_addr_t addr,
unsigned size)
{
return 0;
}
static void tcx_dac_writel(void *opaque, target_phys_addr_t addr, uint64_t val,
unsigned size)
{
TCXState *s = opaque;
switch (addr) {
case 0:
s->dac_index = val >> 24;
s->dac_state = 0;
break;
case 4:
switch (s->dac_state) {
case 0:
s->r[s->dac_index] = val >> 24;
update_palette_entries(s, s->dac_index, s->dac_index + 1);
s->dac_state++;
break;
case 1:
s->g[s->dac_index] = val >> 24;
update_palette_entries(s, s->dac_index, s->dac_index + 1);
s->dac_state++;
break;
case 2:
s->b[s->dac_index] = val >> 24;
update_palette_entries(s, s->dac_index, s->dac_index + 1);
s->dac_index = (s->dac_index + 1) & 255; // Index autoincrement
default:
s->dac_state = 0;
break;
}
break;
default:
break;
}
return;
}
static const MemoryRegionOps tcx_dac_ops = {
.read = tcx_dac_readl,
.write = tcx_dac_writel,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
};
static uint64_t dummy_readl(void *opaque, target_phys_addr_t addr,
unsigned size)
{
return 0;
}
static void dummy_writel(void *opaque, target_phys_addr_t addr,
uint64_t val, unsigned size)
{
}
static const MemoryRegionOps dummy_ops = {
.read = dummy_readl,
.write = dummy_writel,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
};
static int tcx_init1(SysBusDevice *dev)
{
TCXState *s = FROM_SYSBUS(TCXState, dev);
ram_addr_t vram_offset = 0;
int size;
uint8_t *vram_base;
memory_region_init_ram(&s->vram_mem, "tcx.vram",
s->vram_size * (1 + 4 + 4));
vmstate_register_ram_global(&s->vram_mem);
vram_base = memory_region_get_ram_ptr(&s->vram_mem);
/* 8-bit plane */
s->vram = vram_base;
size = s->vram_size;
memory_region_init_alias(&s->vram_8bit, "tcx.vram.8bit",
&s->vram_mem, vram_offset, size);
sysbus_init_mmio(dev, &s->vram_8bit);
vram_offset += size;
vram_base += size;
/* DAC */
memory_region_init_io(&s->dac, &tcx_dac_ops, s, "tcx.dac", TCX_DAC_NREGS);
sysbus_init_mmio(dev, &s->dac);
/* TEC (dummy) */
memory_region_init_io(&s->tec, &dummy_ops, s, "tcx.tec", TCX_TEC_NREGS);
sysbus_init_mmio(dev, &s->tec);
/* THC: NetBSD writes here even with 8-bit display: dummy */
memory_region_init_io(&s->thc24, &dummy_ops, s, "tcx.thc24",
TCX_THC_NREGS_24);
sysbus_init_mmio(dev, &s->thc24);
if (s->depth == 24) {
/* 24-bit plane */
size = s->vram_size * 4;
s->vram24 = (uint32_t *)vram_base;
s->vram24_offset = vram_offset;
memory_region_init_alias(&s->vram_24bit, "tcx.vram.24bit",
&s->vram_mem, vram_offset, size);
sysbus_init_mmio(dev, &s->vram_24bit);
vram_offset += size;
vram_base += size;
/* Control plane */
size = s->vram_size * 4;
s->cplane = (uint32_t *)vram_base;
s->cplane_offset = vram_offset;
memory_region_init_alias(&s->vram_cplane, "tcx.vram.cplane",
&s->vram_mem, vram_offset, size);
sysbus_init_mmio(dev, &s->vram_cplane);
s->ds = graphic_console_init(tcx24_update_display,
tcx24_invalidate_display,
tcx24_screen_dump, NULL, s);
} else {
/* THC 8 bit (dummy) */
memory_region_init_io(&s->thc8, &dummy_ops, s, "tcx.thc8",
TCX_THC_NREGS_8);
sysbus_init_mmio(dev, &s->thc8);
s->ds = graphic_console_init(tcx_update_display,
tcx_invalidate_display,
tcx_screen_dump, NULL, s);
}
qemu_console_resize(s->ds, s->width, s->height);
return 0;
}
static void tcx_screen_dump(void *opaque, const char *filename, bool cswitch,
Error **errp)
{
TCXState *s = opaque;
FILE *f;
uint8_t *d, *d1, v;
int ret, y, x;
f = fopen(filename, "wb");
if (!f) {
error_setg(errp, "failed to open file '%s': %s", filename,
strerror(errno));
return;
}
ret = fprintf(f, "P6\n%d %d\n%d\n", s->width, s->height, 255);
if (ret < 0) {
goto write_err;
}
d1 = s->vram;
for(y = 0; y < s->height; y++) {
d = d1;
for(x = 0; x < s->width; x++) {
v = *d;
ret = fputc(s->r[v], f);
if (ret == EOF) {
goto write_err;
}
ret = fputc(s->g[v], f);
if (ret == EOF) {
goto write_err;
}
ret = fputc(s->b[v], f);
if (ret == EOF) {
goto write_err;
}
d++;
}
d1 += MAXX;
}
out:
fclose(f);
return;
write_err:
error_setg(errp, "failed to write to file '%s': %s", filename,
strerror(errno));
unlink(filename);
goto out;
}
static void tcx24_screen_dump(void *opaque, const char *filename, bool cswitch,
Error **errp)
{
TCXState *s = opaque;
FILE *f;
uint8_t *d, *d1, v;
uint32_t *s24, *cptr, dval;
int ret, y, x;
f = fopen(filename, "wb");
if (!f) {
error_setg(errp, "failed to open file '%s': %s", filename,
strerror(errno));
return;
}
ret = fprintf(f, "P6\n%d %d\n%d\n", s->width, s->height, 255);
if (ret < 0) {
goto write_err;
}
d1 = s->vram;
s24 = s->vram24;
cptr = s->cplane;
for(y = 0; y < s->height; y++) {
d = d1;
for(x = 0; x < s->width; x++, d++, s24++) {
if ((*cptr++ & 0xff000000) == 0x03000000) { // 24-bit direct
dval = *s24 & 0x00ffffff;
ret = fputc((dval >> 16) & 0xff, f);
if (ret == EOF) {
goto write_err;
}
ret = fputc((dval >> 8) & 0xff, f);
if (ret == EOF) {
goto write_err;
}
ret = fputc(dval & 0xff, f);
if (ret == EOF) {
goto write_err;
}
} else {
v = *d;
ret = fputc(s->r[v], f);
if (ret == EOF) {
goto write_err;
}
ret = fputc(s->g[v], f);
if (ret == EOF) {
goto write_err;
}
ret = fputc(s->b[v], f);
if (ret == EOF) {
goto write_err;
}
}
}
d1 += MAXX;
}
out:
fclose(f);
return;
write_err:
error_setg(errp, "failed to write to file '%s': %s", filename,
strerror(errno));
unlink(filename);
goto out;
}
static Property tcx_properties[] = {
DEFINE_PROP_TADDR("addr", TCXState, addr, -1),
DEFINE_PROP_HEX32("vram_size", TCXState, vram_size, -1),
DEFINE_PROP_UINT16("width", TCXState, width, -1),
DEFINE_PROP_UINT16("height", TCXState, height, -1),
DEFINE_PROP_UINT16("depth", TCXState, depth, -1),
DEFINE_PROP_END_OF_LIST(),
};
static void tcx_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
k->init = tcx_init1;
dc->reset = tcx_reset;
dc->vmsd = &vmstate_tcx;
dc->props = tcx_properties;
}
static TypeInfo tcx_info = {
.name = "SUNW,tcx",
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(TCXState),
.class_init = tcx_class_init,
};
static void tcx_register_types(void)
{
type_register_static(&tcx_info);
}
type_init(tcx_register_types)