qemu/default-configs/xtensa-softmmu.mak

# Default configuration for Xtensa

CONFIG_SEMIHOSTING=y

# Boards:
#
CONFIG_XTENSA_SIM=y
CONFIG_XTENSA_VIRT=y
CONFIG_XTENSA_XTFPGA=y
target-xtensa: add target to the configure script Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com> 2011-09-06 07:55:26 +08:00			`# Default configuration for Xtensa`
target-xtensa: add Avnet LX60/LX110/LX200 boards These boards carry similar hardware: SDRAM (48M for LX110, 64M for LX60, 96M for LX200), 16 Mbyte FLASH, FPGA, 10/100 Mbps Ethernet PHY and 16550 UART. FPGA may be loaded with almost any Tensilica processor. It is also used to implement Ethernet MAC, e.g. OpenCores 10/100 Mbps Ethernet MAC and LED/DIP switches access. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com> 2011-10-16 06:56:46 +08:00
semihosting: introduce CONFIG_SEMIHOSTING There isn't much point building semihosting for platforms that don't support it. Introduce a new symbol and enable it only for the softmmu targets that need it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> 2019-05-13 22:25:27 +08:00			`CONFIG_SEMIHOSTING=y`

xtensa-softmmu.mak: express dependencies with Kconfig %-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2019-01-29 19:16:27 +08:00			`# Boards:`
			`#`
hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally Add the new CONFIG_* values to default-config/xtensa*-softmmu.mak. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20190202072456.6468-17-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2019-02-02 15:24:45 +08:00			`CONFIG_XTENSA_SIM=y`
hw/xtensa: add virt machine virt machine is a sim machine with generic PCI host controller. Make common parts of sim machine initialization reusable. Add PCI controller at 0xf0000000 with PIO space at its base address, ECAM space at base address + 1M and MMIO space at base address + 64M. Connect IRQ lines to consecutive CPU external IRQ pins starting from 0. Instantiate network interfaces on virt machine. Xtensa linux kernel configuration virt_defconfig can successfully boot on this machine. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> 2018-09-11 07:33:24 +08:00			`CONFIG_XTENSA_VIRT=y`
xtensa: rename CONFIG_XTENSA_FPGA to CONFIG_XTENSA_XTFPGA Match the symbol name that is used e.g. in Linux (drivers/spi/Kconfig). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2019-02-21 01:45:35 +08:00			`CONFIG_XTENSA_XTFPGA=y`