spapr: Treat devices added before inbound migration as coldplugged

When migrating a guest which has already had devices hotplugged,
libvirt typically starts the destination qemu with -incoming defer,
adds those hotplugged devices with qmp, then initiates the incoming
migration.

This causes problems for the management of spapr DRC state.  Because
the device is treated as hotplugged, it goes into a DRC state for a
device immediately after it's plugged, but before the guest has
acknowledged its presence.  However, chances are the guest on the
source machine *has* acknowledged the device's presence and configured
it.

If the source has fully configured the device, then DRC state won't be
sent in the migration stream: for maximum migration compatibility with
earlier versions we don't migrate DRCs in coldplug-equivalent state.
That means that the DRC effectively changes state over the migrate,
causing problems later on.

In addition, logging hotplug events for these devices isn't what we
want because a) those events should already have been issued on the
source host and b) the event queue should get wiped out by the
incoming state anyway.

In short, what we really want is to treat devices added before an
incoming migration as if they were coldplugged.

To do this, we first add a spapr_drc_hotplugged() helper which
determines if the device is hotplugged in the sense relevant for DRC
state management.  We only send hotplug events when this is true.
Second, when we add a device which isn't hotplugged in this sense, we
force a reset of the DRC state - this ensures the DRC is in a
coldplug-equivalent state (there isn't usually a system reset between
these device adds and the incoming migration).

This is based on an earlier patch by Laurent Vivier, cleaned up and
extended.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>

hw/ppc/spapr.c

@@ -2636,6 +2636,7 @@ static void spapr_add_lmbs(DeviceState *dev, uint64_t addr_start, uint64_t size,
     int i, fdt_offset, fdt_size;
     void *fdt;
     uint64_t addr = addr_start;
+    bool hotplugged = spapr_drc_hotplugged(dev);
     Error *local_err = NULL;
 
     for (i = 0; i < nr_lmbs; i++) {
@@ -2659,12 +2660,15 @@ static void spapr_add_lmbs(DeviceState *dev, uint64_t addr_start, uint64_t size,
             error_propagate(errp, local_err);
             return;
         }
+        if (!hotplugged) {
+            spapr_drc_reset(drc);
+        }
         addr += SPAPR_MEMORY_BLOCK_SIZE;
     }
     /* send hotplug notification to the
      * guest only in case of hotplugged memory
      */
-    if (dev->hotplugged) {
+    if (hotplugged) {
         if (dedicated_hp_event_source) {
             drc = spapr_drc_by_id(TYPE_SPAPR_DRC_LMB,
                                   addr_start / SPAPR_MEMORY_BLOCK_SIZE);
@@ -2998,6 +3002,7 @@ static void spapr_core_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
     int smt = kvmppc_smt_threads();
     CPUArchId *core_slot;
     int index;
+    bool hotplugged = spapr_drc_hotplugged(dev);
 
     core_slot = spapr_find_cpu_slot(MACHINE(hotplug_dev), cc->core_id, &index);
     if (!core_slot) {
@@ -3018,15 +3023,18 @@ static void spapr_core_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
             error_propagate(errp, local_err);
             return;
         }
+
+        if (hotplugged) {
+            /*
+             * Send hotplug notification interrupt to the guest only
+             * in case of hotplugged CPUs.
+             */
+            spapr_hotplug_req_add_by_index(drc);
+        } else {
+            spapr_drc_reset(drc);
+        }
     }
 
-    if (dev->hotplugged) {
-        /*
-         * Send hotplug notification interrupt to the guest only in case
-         * of hotplugged CPUs.
-         */
-        spapr_hotplug_req_add_by_index(drc);
-    }
     core_slot->cpu = OBJECT(dev);
 
     if (smc->pre_2_10_has_unused_icps) {

hw/ppc/spapr_drc.c

@@ -412,10 +412,8 @@ static bool release_pending(sPAPRDRConnector *drc)
     return drc->awaiting_release;
 }
 
-static void drc_reset(void *opaque)
+void spapr_drc_reset(sPAPRDRConnector *drc)
 {
-    sPAPRDRConnector *drc = SPAPR_DR_CONNECTOR(opaque);
-
     trace_spapr_drc_reset(spapr_drc_index(drc));
 
     g_free(drc->ccs);
@@ -447,6 +445,11 @@ static void drc_reset(void *opaque)
     }
 }
 
+static void drc_reset(void *opaque)
+{
+    spapr_drc_reset(SPAPR_DR_CONNECTOR(opaque));
+}
+
 static bool spapr_drc_needed(void *opaque)
 {
     sPAPRDRConnector *drc = (sPAPRDRConnector *)opaque;

hw/ppc/spapr_pci.c

@@ -1443,7 +1443,9 @@ static void spapr_pci_plug(HotplugHandler *plug_handler,
     /* If this is function 0, signal hotplug for all the device functions.
      * Otherwise defer sending the hotplug event.
      */
-    if (plugged_dev->hotplugged && PCI_FUNC(pdev->devfn) == 0) {
+    if (!spapr_drc_hotplugged(plugged_dev)) {
+        spapr_drc_reset(drc);
+    } else if (PCI_FUNC(pdev->devfn) == 0) {
         int i;
 
         for (i = 0; i < 8; i++) {

include/hw/ppc/spapr_drc.h

@@ -15,6 +15,7 @@
 
 #include <libfdt.h>
 #include "qom/object.h"
+#include "sysemu/sysemu.h"
 #include "hw/qdev.h"
 
 #define TYPE_SPAPR_DR_CONNECTOR "spapr-dr-connector"
@@ -223,6 +224,13 @@ typedef struct sPAPRDRConnectorClass {
     bool (*release_pending)(sPAPRDRConnector *drc);
 } sPAPRDRConnectorClass;
 
+static inline bool spapr_drc_hotplugged(DeviceState *dev)
+{
+    return dev->hotplugged && !runstate_check(RUN_STATE_INMIGRATE);
+}
+
+void spapr_drc_reset(sPAPRDRConnector *drc);
+
 uint32_t spapr_drc_index(sPAPRDRConnector *drc);
 sPAPRDRConnectorType spapr_drc_type(sPAPRDRConnector *drc);