mirror of https://gitee.com/openkylin/qemu.git
hw/i386: AMD-Vi IVRS DMA alias support
When we account for DMA aliases in the PCI address space, we can no
longer use a single IVHD entry in the IVRS covering all devices. We
instead need to walk the PCI bus and create alias ranges when we find
a conventional bus. These alias ranges cannot overlap with a "Select
All" range (as currently implemented), so we also need to enumerate
each device with IVHD entries.
Importantly, the IVHD entries used here include a Device ID, which is
simply the PCI BDF (Bus/Device/Function). The guest firmware is
responsible for programming bus numbers, so the final revision of this
table depends on the update mechanism (acpi_build_update) to be called
after guest PCI enumeration.
For an example guest configuration of:
-+-[0000:40]---00.0-[41]----00.0 Intel Corporation 82574L Gigabit Network Connection
\-[0000:00]-+-00.0 Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
+-01.0 Device 1234:1111
+-02.0-[01]----00.0 Intel Corporation 82574L Gigabit Network Connection
+-02.1-[02]----00.0 Red Hat, Inc. QEMU XHCI Host Controller
+-02.2-[03]--
+-02.3-[04]--
+-02.4-[05]--
+-02.5-[06-09]----00.0-[07-09]--+-00.0-[08]--
| \-01.0-[09]----00.0 Intel Corporation 82574L Gigabit Network Connection
+-02.6-[0a-0c]----00.0-[0b-0c]--+-01.0-[0c]--
| \-03.0 Intel Corporation 82540EM Gigabit Ethernet Controller
+-02.7-[0d]----0e.0 Intel Corporation 82540EM Gigabit Ethernet Controller
+-03.0 Red Hat, Inc. QEMU PCIe Expander bridge
+-04.0 Advanced Micro Devices, Inc. [AMD] Device 0020
+-1f.0 Intel Corporation 82801IB (ICH9) LPC Interface Controller
+-1f.2 Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode]
\-1f.3 Intel Corporation 82801I (ICH9 Family) SMBus Controller
Where we have:
00:02.7 PCI bridge: Intel Corporation 82801 PCI Bridge
(dmi-to-pci-bridge)
00:03.0 Host bridge: Red Hat, Inc. QEMU PCIe Expander bridge
(pcie-expander-bus)
06:00.0 PCI bridge: Texas Instruments XIO3130 PCI Express Switch (Upstream)
(pcie-switch-upstream-port)
07:00.0 PCI bridge: Texas Instruments XIO3130 PCI Express Switch (Downstream)
(pcie-switch-downstream-port)
07:01.0 PCI bridge: Texas Instruments XIO3130 PCI Express Switch (Downstream)
(pcie-switch-downstream-port)
0a:00.0 PCI bridge: Red Hat, Inc. Device 000e
(pcie-to-pci-bridge)
The following IVRS table is produced:
AMD-Vi: Using IVHD type 0x10
AMD-Vi: device: 00:04.0 cap: 0040 seg: 0 flags: d1 info 0000
AMD-Vi: mmio-addr: 00000000fed80000
AMD-Vi: DEV_SELECT devid: 40:00.0 flags: 00
AMD-Vi: DEV_SELECT_RANGE_START devid: 41:00.0 flags: 00
AMD-Vi: DEV_RANGE_END devid: 41:1f.7
AMD-Vi: DEV_SELECT devid: 00:00.0 flags: 00
AMD-Vi: DEV_SELECT devid: 00:01.0 flags: 00
AMD-Vi: DEV_SELECT devid: 00:02.0 flags: 00
AMD-Vi: DEV_SELECT_RANGE_START devid: 01:00.0 flags: 00
AMD-Vi: DEV_RANGE_END devid: 01:1f.7
AMD-Vi: DEV_SELECT devid: 00:02.1 flags: 00
AMD-Vi: DEV_SELECT_RANGE_START devid: 02:00.0 flags: 00
AMD-Vi: DEV_RANGE_END devid: 02:1f.7
AMD-Vi: DEV_SELECT devid: 00:02.2 flags: 00
AMD-Vi: DEV_SELECT_RANGE_START devid: 03:00.0 flags: 00
AMD-Vi: DEV_RANGE_END devid: 03:1f.7
AMD-Vi: DEV_SELECT devid: 00:02.3 flags: 00
AMD-Vi: DEV_SELECT_RANGE_START devid: 04:00.0 flags: 00
AMD-Vi: DEV_RANGE_END devid: 04:1f.7
AMD-Vi: DEV_SELECT devid: 00:02.4 flags: 00
AMD-Vi: DEV_SELECT_RANGE_START devid: 05:00.0 flags: 00
AMD-Vi: DEV_RANGE_END devid: 05:1f.7
AMD-Vi: DEV_SELECT devid: 00:02.5 flags: 00
AMD-Vi: DEV_SELECT devid: 06:00.0 flags: 00
AMD-Vi: DEV_SELECT devid: 07:00.0 flags: 00
AMD-Vi: DEV_SELECT_RANGE_START devid: 08:00.0 flags: 00
AMD-Vi: DEV_RANGE_END devid: 08:1f.7
AMD-Vi: DEV_SELECT devid: 07:01.0 flags: 00
AMD-Vi: DEV_SELECT_RANGE_START devid: 09:00.0 flags: 00
AMD-Vi: DEV_RANGE_END devid: 09:1f.7
AMD-Vi: DEV_SELECT devid: 00:02.6 flags: 00
AMD-Vi: DEV_SELECT devid: 0a:00.0 flags: 00
AMD-Vi: DEV_ALIAS_RANGE devid: 0b:00.0 flags: 00 devid_to: 0b:00.0
AMD-Vi: DEV_RANGE_END devid: 0c:1f.7
AMD-Vi: DEV_SELECT devid: 00:02.7 flags: 00
AMD-Vi: DEV_ALIAS_RANGE devid: 0d:00.0 flags: 00 devid_to: 00:02.7
AMD-Vi: DEV_RANGE_END devid: 0d:1f.7
AMD-Vi: DEV_SELECT devid: 00:03.0 flags: 00
AMD-Vi: DEV_SELECT devid: 00:04.0 flags: 00
AMD-Vi: DEV_SELECT devid: 00:1f.0 flags: 00
AMD-Vi: DEV_SELECT devid: 00:1f.2 flags: 00
AMD-Vi: DEV_SELECT devid: 00:1f.3 flags: 00
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <157187084880.5439.16700585779699233836.stgit@gimli.home>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This commit is contained in:
Alex Williamson
Michael S. Tsirkin
parent
77ef8f8db2
commit
977aff1045
|
|
@ -2518,12 +2518,105 @@ build_dmar_q35(GArray *table_data, BIOSLinker *linker)
|
|||
*/
|
||||
#define IOAPIC_SB_DEVID (uint64_t)PCI_BUILD_BDF(0, PCI_DEVFN(0x14, 0))
|
||||
|
||||
/*
|
||||
* Insert IVHD entry for device and recurse, insert alias, or insert range as
|
||||
* necessary for the PCI topology.
|
||||
*/
|
||||
static void
|
||||
insert_ivhd(PCIBus *bus, PCIDevice *dev, void *opaque)
|
||||
{
|
||||
GArray *table_data = opaque;
|
||||
uint32_t entry;
|
||||
|
||||
/* "Select" IVHD entry, type 0x2 */
|
||||
entry = PCI_BUILD_BDF(pci_bus_num(bus), dev->devfn) << 8 | 0x2;
|
||||
build_append_int_noprefix(table_data, entry, 4);
|
||||
|
||||
if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_BRIDGE)) {
|
||||
PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(dev));
|
||||
uint8_t sec = pci_bus_num(sec_bus);
|
||||
uint8_t sub = dev->config[PCI_SUBORDINATE_BUS];
|
||||
|
||||
if (pci_bus_is_express(sec_bus)) {
|
||||
/*
|
||||
* Walk the bus if there are subordinates, otherwise use a range
|
||||
* to cover an entire leaf bus. We could potentially also use a
|
||||
* range for traversed buses, but we'd need to take care not to
|
||||
* create both Select and Range entries covering the same device.
|
||||
* This is easier and potentially more compact.
|
||||
*
|
||||
* An example bare metal system seems to use Select entries for
|
||||
* root ports without a slot (ie. built-ins) and Range entries
|
||||
* when there is a slot. The same system also only hard-codes
|
||||
* the alias range for an onboard PCIe-to-PCI bridge, apparently
|
||||
* making no effort to support nested bridges. We attempt to
|
||||
* be more thorough here.
|
||||
*/
|
||||
if (sec == sub) { /* leaf bus */
|
||||
/* "Start of Range" IVHD entry, type 0x3 */
|
||||
entry = PCI_BUILD_BDF(sec, PCI_DEVFN(0, 0)) << 8 | 0x3;
|
||||
build_append_int_noprefix(table_data, entry, 4);
|
||||
/* "End of Range" IVHD entry, type 0x4 */
|
||||
entry = PCI_BUILD_BDF(sub, PCI_DEVFN(31, 7)) << 8 | 0x4;
|
||||
build_append_int_noprefix(table_data, entry, 4);
|
||||
} else {
|
||||
pci_for_each_device(sec_bus, sec, insert_ivhd, table_data);
|
||||
}
|
||||
} else {
|
||||
/*
|
||||
* If the secondary bus is conventional, then we need to create an
|
||||
* Alias range for everything downstream. The range covers the
|
||||
* first devfn on the secondary bus to the last devfn on the
|
||||
* subordinate bus. The alias target depends on legacy versus
|
||||
* express bridges, just as in pci_device_iommu_address_space().
|
||||
* DeviceIDa vs DeviceIDb as per the AMD IOMMU spec.
|
||||
*/
|
||||
uint16_t dev_id_a, dev_id_b;
|
||||
|
||||
dev_id_a = PCI_BUILD_BDF(sec, PCI_DEVFN(0, 0));
|
||||
|
||||
if (pci_is_express(dev) &&
|
||||
pcie_cap_get_type(dev) == PCI_EXP_TYPE_PCI_BRIDGE) {
|
||||
dev_id_b = dev_id_a;
|
||||
} else {
|
||||
dev_id_b = PCI_BUILD_BDF(pci_bus_num(bus), dev->devfn);
|
||||
}
|
||||
|
||||
/* "Alias Start of Range" IVHD entry, type 0x43, 8 bytes */
|
||||
build_append_int_noprefix(table_data, dev_id_a << 8 | 0x43, 4);
|
||||
build_append_int_noprefix(table_data, dev_id_b << 8 | 0x0, 4);
|
||||
|
||||
/* "End of Range" IVHD entry, type 0x4 */
|
||||
entry = PCI_BUILD_BDF(sub, PCI_DEVFN(31, 7)) << 8 | 0x4;
|
||||
build_append_int_noprefix(table_data, entry, 4);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* For all PCI host bridges, walk and insert IVHD entries */
|
||||
static int
|
||||
ivrs_host_bridges(Object *obj, void *opaque)
|
||||
{
|
||||
GArray *ivhd_blob = opaque;
|
||||
|
||||
if (object_dynamic_cast(obj, TYPE_PCI_HOST_BRIDGE)) {
|
||||
PCIBus *bus = PCI_HOST_BRIDGE(obj)->bus;
|
||||
|
||||
if (bus) {
|
||||
pci_for_each_device(bus, pci_bus_num(bus), insert_ivhd, ivhd_blob);
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
build_amd_iommu(GArray *table_data, BIOSLinker *linker)
|
||||
{
|
||||
int ivhd_table_len = 28;
|
||||
int ivhd_table_len = 24;
|
||||
int iommu_start = table_data->len;
|
||||
AMDVIState *s = AMD_IOMMU_DEVICE(x86_iommu_get_default());
|
||||
GArray *ivhd_blob = g_array_new(false, true, 1);
|
||||
|
||||
/* IVRS header */
|
||||
acpi_data_push(table_data, sizeof(AcpiTableHeader));
|
||||
|
|
@ -2544,6 +2637,27 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker)
|
|||
(1UL << 7), /* PPRSup */
|
||||
1);
|
||||
|
||||
/*
|
||||
* A PCI bus walk, for each PCI host bridge, is necessary to create a
|
||||
* complete set of IVHD entries. Do this into a separate blob so that we
|
||||
* can calculate the total IVRS table length here and then append the new
|
||||
* blob further below. Fall back to an entry covering all devices, which
|
||||
* is sufficient when no aliases are present.
|
||||
*/
|
||||
object_child_foreach_recursive(object_get_root(),
|
||||
ivrs_host_bridges, ivhd_blob);
|
||||
|
||||
if (!ivhd_blob->len) {
|
||||
/*
|
||||
* Type 1 device entry reporting all devices
|
||||
* These are 4-byte device entries currently reporting the range of
|
||||
* Refer to Spec - Table 95:IVHD Device Entry Type Codes(4-byte)
|
||||
*/
|
||||
build_append_int_noprefix(ivhd_blob, 0x0000001, 4);
|
||||
}
|
||||
|
||||
ivhd_table_len += ivhd_blob->len;
|
||||
|
||||
/*
|
||||
* When interrupt remapping is supported, we add a special IVHD device
|
||||
* for type IO-APIC.
|
||||
|
|
@ -2551,6 +2665,7 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker)
|
|||
if (x86_iommu_ir_supported(x86_iommu_get_default())) {
|
||||
ivhd_table_len += 8;
|
||||
}
|
||||
|
||||
/* IVHD length */
|
||||
build_append_int_noprefix(table_data, ivhd_table_len, 2);
|
||||
/* DeviceID */
|
||||
|
|
@ -2570,12 +2685,10 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker)
|
|||
(1UL << 2) | /* GTSup */
|
||||
(1UL << 6), /* GASup */
|
||||
4);
|
||||
/*
|
||||
* Type 1 device entry reporting all devices
|
||||
* These are 4-byte device entries currently reporting the range of
|
||||
* Refer to Spec - Table 95:IVHD Device Entry Type Codes(4-byte)
|
||||
*/
|
||||
build_append_int_noprefix(table_data, 0x0000001, 4);
|
||||
|
||||
/* IVHD entries as found above */
|
||||
g_array_append_vals(table_data, ivhd_blob->data, ivhd_blob->len);
|
||||
g_array_free(ivhd_blob, TRUE);
|
||||
|
||||
/*
|
||||
* Add a special IVHD device type.
|
||||
|
|
|
|||
Loading…
Reference in New Issue