This patch updates the iscsi layer to automatically pick a 'unique'
initiator-name based on the name of the vm in case the user has not set
an explicit iqn-name to use.
Create a new function qemu_get_vm_name() that returns the name of the VM,
if specified.
This way we can thus create default names to use as the initiator name
based on the guest session.
If the VM is not named via the '-name' command line argument, the iscsi
initiator-name used wiull simply be
iqn.2008-11.org.linux-kvm
If a name for the VM was specified with the '-name' option, iscsi will
use a default initiatorname of
iqn.2008-11.org.linux-kvm:<name>
These names are just the default iscsi initiator name that qemu will
generate/use only when the user has not set an explicit initiator name
via the commandlines or config files.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
FIPS 140-2 requires disabling certain ciphers, including DES, which is used
by VNC to obscure passwords when they are sent over the network. The
solution for FIPS users is to disable the use of VNC password auth when the
host system is operating in FIPS compliance mode and the user has specified
'-enable-fips' on the QEMU command line.
This patch causes QEMU to emit a message to stderr when the host system is
running in FIPS mode and a VNC password was specified on the commend line.
If the system is not running in FIPS mode, or is running in FIPS mode but
VNC password authentication was not requested, QEMU operates normally.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The description for set_password and expire_password commands is
incomplete. This patch fixes the man page that is being generated
to match the real behaviour of these functions.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch improves the description of -nodefaults QEMU command line
option by adding more information what is being disabled using this
command.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is the patch to improve description for -{read|write}config
functions.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When using guestfwd=, Qemu only connects the virtual server's TCP port
to a single chardev. This is useless in most cases, as we usually want
to have more than a single connection from the guest to the outside world.
This patch adds a new cmd: target to guestfwd= that allows for execution
of a command on every TCP connection. This leverages the same code as
the -smb parameter, just that here the command is user defined.
Reported-by: Sascha Wilde <wilde@intevation.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
* sweil/for-1.1:
qemu-doc: Use QEMU instead of qemu for product name
qemu-doc: Fix executable name in examples
qemu-doc: Add missing parameter in description of -D option
configure: Use QEMU instead of Qemu
fix some common typos
qemu-timer: Fix wrong error message
When 'qemu' was used as a product name or as a generic process name,
it is now replaced by the official upper case 'QEMU'.
v2:
Added missing period (hint from Andreas Färber).
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The executable name qemu was replaced some time ago by qemu-system-i386.
Fix all examples accordingly.
Some examples will only work with qemu-system-i386 or qemu-system-x86_64
for obvious reasons ("dos.img").
To keep things simple, I did not vary the executable name.
Place holders like qemu-system-TARGET were also only used once
in the enhanced description for QEMU launches using Wine.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The official spelling is QEMU.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The idea behind qtest is pretty simple. Instead of executing a CPU via TCG or
KVM, rely on an external process to send events to the device model that the CPU
would normally generate.
qtest presents itself as an accelerator. In addition, a new option is added to
establish a qtest server (-qtest) that takes a character device. This is what
allows the external process to send CPU events to the device model.
qtest uses a simple line based protocol to send the events. Documentation of
that protocol is in qtest.c.
I considered reusing the monitor for this job. Adding interrupts would be a bit
difficult. In addition, logging would also be difficult.
qtest has extensive logging support. All protocol commands are logged with
time stamps using a new command line option (-qtest-log). Logging is important
since ultimately, this is a feature for debugging.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This will let people use backwards-compatible semantics for devices that
will be affected by the following patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There's only TODO information in qemu man page for -global option. This is a basic description of this option with simple example.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
v4:
- break long line
v3:
- add use case description
- use prop instead of property
v2:
- Use better value in example
Patch:
--
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If compiled with CONFIG_FDT, allow user to specify a device tree file using
the -dtb argument. If the machine supports it then the dtb will be loaded
into memory and passed to the kernel on boot.
Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
[Peter Maydell: Use machine opt rather than global to pass dtb filename]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VNC clients send a shared flag in the client init message. Up to now
qemu completely ignores this. This patch implements shared flag
handling. It comes with three policies: By default qemu behaves as one
would expect: Asking for a exclusive access grants exclusive access to
the client connecting. There is also a desktop sharing mode which
disallows exclusive connects (so one forgetting -shared wouldn't drop
everybody else) and a compatibility mode which mimics the traditional
(but non-conforming) qemu behavior.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds configuration variables for iSCSI to set
initiator-name to use when logging in to the target,
which type of header-digest to negotiate with the target
and username and password for CHAP authentication.
This allows specifying a initiator-name either from the command line
-iscsi initiator-name=iqn.2004-01.com.example:test
or from a configuration file included with -readconfig
[iscsi]
initiator-name = iqn.2004-01.com.example:test
header-digest = CRC32C|CRC32C-NONE|NONE-CRC32C|NONE
user = CHAP username
password = CHAP password
If you use several different targets, you can also configure this on a per
target basis by using a group name:
[iscsi "iqn.target.name"]
...
The configuration file can be read using -readconfig.
Example :
qemu-system-i386 -drive file=iscsi://127.0.0.1/iqn.ronnie.test/1
-readconfig iscsi.conf
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce the KVM-specific machine option kvm_shadow_mem. It allows to
set a custom shadow MMU size for the virtual machine. This is useful for
stress testing e.g.
Only x86 supports this for now, but it is in principle a generic
concept for all targets with shadow MMUs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* aneesh/for-upstream:
hw/9pfs: Remove O_NOATIME flag from 9pfs open() calls in readonly mode
hw/9pfs: Update MAINTAINERS file
fsdev: Fix parameter parsing for proxy helper
hw/9pfs: Fix crash when mounting with synthfs
hw/9pfs: Preserve S_ISGID
hw/9pfs: Add new security model mapped-file.
The most common use of -net tap is to connect a tap device to a bridge. This
requires the use of a script and running qemu as root in order to allocate a
tap device to pass to the script.
This model is great for portability and flexibility but it's incredibly
difficult to eliminate the need to run qemu as root. The only really viable
mechanism is to use tunctl to create a tap device, attach it to a bridge as
root, and then hand that tap device to qemu. The problem with this mechanism
is that it requires administrator intervention whenever a user wants to create
a guest.
By essentially writing a helper that implements the most common qemu-ifup
script that can be safely given cap_net_admin, we can dramatically simplify
things for non-privileged users. We still support existing -net tap options
as a mechanism for advanced users and backwards compatibility.
Currently, this is very Linux centric but there's really no reason why it
couldn't be extended for other Unixes.
A typical invocation would be similar to one of the following:
qemu linux.img -net bridge -net nic,model=virtio
qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper"
-net nic,model=virtio
qemu linux.img -netdev bridge,id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper",id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
The default bridge that we attach to is br0. The thinking is that a distro
could preconfigure such an interface to allow out-of-the-box bridged networking.
Alternatively, if a user wants to use a different bridge, a typical invocation
would be simliar to one of the following:
qemu linux.img -net bridge,br=qemubr0 -net nic,model=virtio
qemu linux.img -net tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0"
-net nic,model=virtio
qemu linux.img -netdev bridge,br=qemubr0,id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
qemu linux.img -netdev tap,helper="/usr/local/libexec/qemu-bridge-helper --br=qemubr0",id=hn0
-device virtio-net-pci,netdev=hn0,id=nic1
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make the basic in-kernel irqchip support selectable via
-machine ...,kernel_irqchip=on. Leave it off by default until it can
fully replace user space models.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This enable us to do passthrough equivalent security model on NFS directory.
NFS server mostly do root squashing and don't support xattr. Hence we cannot
use 'passthrough' or 'mapped' security model
Also added "mapped-xattr" security to indicate earlier "mapped" security model
Older name is still supported.
POSIX rules regarding ctime update on chmod are not followed by this security model.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* stefanha/trivial-patches:
qemu-nbd: drop loop which can never loop
Make python mandatory
net/socket.c: Fix fd leak in net_socket_listen_init() error paths
gdbstub: Fix fd leak in gdbserver_open() error path
configure: Fix test for supported host CPU type
configure: CONFIG_QEMU_INTERP_PREFIX only for user mode
scsi virtio-blk usb-msd: Clean up device init error messages
Strip trailing '\n' from error_report()'s first argument (again)
qemu-options.hx: fix tls-channel help text
Remove the default compiled out tunnel channel, add the always available
cursor channel. Optimally the man page would depend on compiled in
options, but that's harder to do.
RHBZ: 688586
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Add option to use named socket for communicating between proxy helper
and qemu proxy FS. Access to socket can be given by using command line
options -u and -g.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
The balloon option is not i386 only, so move it into the standard
options section.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Only print options in the help output that are accepted by our arch.
This is less confusing for users and also for other programs that
consume the help output.
The options affected are:
-g and -prom-env only displayed on PPC or SPARC
-win2k-hack, -rtc-td-hack, -no-fd-bootchk, -no-acpi, -no-hpet,
-acpitable, -smbios only displayed on i386
-semihosting only displayed on ARM, M68K or XTENSA
-old-param only displayed on ARM
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
accidently->accidentally
annother->another
choosen->chosen
consideres->considers
decriptor->descriptor
developement->development
paramter->parameter
preceed->precede
preceeding->preceding
priviledge->privilege
propogation->propagation
substraction->subtraction
throught->through
upto->up to
usefull->useful
Fix also grammar in posix-aio-compat.c
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds the -drive copy-on-read=on|off command-line option:
copy-on-read=on|off
copy-on-read is "on" or "off" and enables whether to copy read backing
file sectors into the image file. Copy-on-read avoids accessing the
same backing file sectors repeatedly and is useful when the backing
file is over a slow network. By default copy-on-read is off.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch create a synthetic file system with mount tag
v_synth when -virtfs_synth command line option is specified
in qemu. The synthetic file system can be mounted in guest
using 9p using the below command line
mount -t 9p -oversion=9p2000.L,trans=virtio v_synth <mountpint>
Synthetic file system enabled different qemu subsystem to register
callbacks for read and write events from guest. The subsystem
can create directories and files in the synthetic file system as show
in ex below
qemu_v9fs_synth_mkdir(NULL, 0777, "test2", &node);
qemu_v9fs_synth_add_file(node, 0777, "testfile",
my_test_read, NULL, NULL);
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
A new fsdev parameter "readonly" is introduced to control accessing 9p export.
"readonly" can be used to specify the access type. By default "rw" access
is given to 9p export.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
This patch adds a short description of how to specify a NBD device
to QEMU.
Syntax for both TCP and Unix Domain Sockets are provided as well
as examples.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add new section for device URL syntax for special files and describe the iSCSI
URL with examples
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Preprocessor directives cannot be used in STEXI/ETEXI sections since
they are not passed through the preprocessor. The spicevmc chardev
option help currently uses #if, which is included verbatim in the man
page output.
Fix this by simply stating that spicevmc chardevs are available only in
builds with spice support.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
writeout=immediate implies the after pwritev we do a sync_file_range.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tensilica iss provides support for applications running in freestanding
environment through SIMCALL command. It is used by Tensilica libc to
access argc/argv, for file I/O, etc.
Note that simcalls that accept buffer addresses expect virtual addresses.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* Replace "available only" by the more common "only available".
* Tracing options depend on the configuration of the QEMU executable,
so clarify the help text for both options.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Allow overriding the location of Samba's smbd.
Pretty much every OS I look at has some means of
changing this path (patching) so lets just make
it easier for OS developers creating packages
and/or end users to override the location.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Uses the generic interface provided in "trace/control.h" in order to provide
a programmatic interface as well as command line and monitor controls.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
The "-trace events" argument can be used to provide a file with a list of trace
event names that will be enabled prior to starting execution, thus providing
early tracing.
This saves the user from manually toggling event states through the monitor
interface or whichever backend-specific interface.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
A default implementation for backend-specific routines is provided in
"trace/default.c", which backends can override by setting "trace_default=no" in
"configure".
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Provides a more hierarchical view of the variable domain.
Also adds the CONFIG_TRACE_* variables for all backends.
[Stefan added missing 'test' in stap if statement]
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch adds -drive cache=directsync for O_DIRECT | O_SYNC host file
I/O with no disk write cache presented to the guest.
This mode is useful when guests may not be sending flushes when
appropriate and therefore leave data at risk in case of power failure.
When cache=directsync is used, write operations are only completed to
the guest when data is safely on disk.
This new mode is like cache=writethrough but it bypasses the host page
cache.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch almost rewrites acpi_table_add() function
(but still leaves it using old get_param_value() interface).
The result is that it's now possible to specify whole table
(together with a header) in an external file, instead of just
data portion, with a new file= parameter, but at the same time
it's still possible to specify header fields as before.
Now with the checkpatch.pl formatting fixes, thanks to
Stefan Hajnoczi for suggestions, with changes from
Isaku Yamahata, and with my further refinements.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: John Baboval <john.baboval@virtualcomputer.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
[yamahata@valinux.co.jp: fix compile error, comment fallthrough]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Added options to let qemu transfer two configuration files to bios:
"bootsplash.bmp" and "etc/boot-menu-wait", which could be specified by command
-boot splash=P,splash-time=T
P is jpg/bmp file name or an absolute path, T have a max value of 0xffff, unit
is ms. With these two options, if user invoke qemu with menu=on option, then
a splash picture would be showed in a given time. For example:
qemu -boot menu=on,splash=/root/boot.bmp,splash-time=5000
would make boot.bmp shown as a brand with 5 seconds in the booting up process.
This feature need the new seabios's support, which could be got from git.
Signed-off-by: Wayne Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All other boolean arguments accept on|off - except for slirp's restrict.
Fix that while still accepting the formerly allowed yes|y|no|n, but
reject everything else. This avoids accidentally allowing external
connections because syntax errors were so far interpreted as
'restrict=no'.
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Superseded by -machine. Therefore, this patch removes -M from the help
list and pushes -machine at the same place in the output.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
-machine somehow suggests that it selects the machine, but it doesn't.
Fix that before this command is set in stone.
Actually, -machine should supersede -M and allow to introduce arbitrary
per-machine options to the command line. That will change the internal
realization again, but we will be able to keep the user interface
stable.
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Until now, pxa2xx_lcd only supported 90deg rotation, but
some machines (for example Zipit Z2) needs 270deg rotation.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Add command line support for logging to a location other than /tmp/qemu.log.
With logging enabled (command line option -d), the log is written to
the hard-coded path /tmp/qemu.log. This patch adds support for writing
the log to a different location by passing the -D option.
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Thanks to agraf_, stefanha and Snader_LB for their IRC assistance.
Thanks to Markus Armbruster and Alexander Graf (again) for their
assistance with the second version of this patch. No patch is too
simple to test...
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Turn on SASL support by appending "sasl" to the spice arguments, which
requires that the client use SASL to authenticate with the spice. The
exact choice of authentication method used is controlled from the
system / user's SASL configuration file for the 'qemu' service. This
is typically found in /etc/sasl2/qemu.conf. If running QEMU as an
unprivileged user, an environment variable SASL_CONF_PATH can be used
to make it search alternate locations for the service config. While
some SASL auth methods can also provide data encryption (eg GSSAPI),
it is recommended that SASL always be combined with the 'tls' and
'x509' settings to enable use of SSL and server certificates. This
ensures a data encryption preventing compromise of authentication
credentials.
It requires support from spice 0.8.1.
[ kraxel: moved spell fix to separate commit ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some people want to be able disable spice's guest <-> client copy paste support
because of security considerations.
[ kraxel: drop old-version error message ]
Phillip Merensky reported that the special keys (e.g. Ctrl-Alt-f for full
screen) did not work correctly if -alt-grab is used.
BUG: 696530
Review of ui/sdl.c:sdl_refresh indicates that this is the intended behaviour,
so we should update the documentation to match the actual behaviour, as
suggested by Phillip in the bug report.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This option gives the ability to switch one "accelerator" like kvm, xen
or the default one tcg. We can specify more than one accelerator by
separate them by a colon. QEMU will try each one and use the first whose
works.
So,
./qemu -machine accel=xen:kvm:tcg
which would try Xen support first, then KVM and finally TCG if none of
the other works.
By default, QEMU will use TCG. But we can specify another default in the
global configuration file.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
helpfull -> helpful
usefull -> useful
cotrol -> control
and a grammar fix.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
New option -display none. This option differs from -nographic by not
trying to take control of stdio etc. but instead behaves as if a
graphics display is enabled, except that it doesn't show one.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch introduces a -display argument which consolidates the
setting of the display mode. Valid options are:
sdl/curses/default
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This option allow to disable adaptive behaviors in some encodings.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When MSI is off, each interrupt needs to be bounced through the io
thread when it's set/cleared, so vhost-net causes more context switches and
higher CPU utilization than userspace virtio which handles networking in
the same thread.
We'll need to fix this by adding level irq support in kvm irqfd,
for now disable vhost-net in these configurations.
Added a vhostforce flag to force vhost-net back on.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With current sndbuf default value, a blocked
target guest can prevent another guest from
transmitting any packets. While current
sndbuf value (1M) is reported to help some
UDP based workloads, the default should
be safe (0).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Adding a chardev backend for spice, where spice determines what
to do with it based on the name attribute given during chardev creation.
For usage by spice vdagent in conjunction with a properly named
virtio-serial device, and future smartcard channel usage.
Example usage:
qemu -device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent \
-device virtserialport,chardev=vdagent,name=com.redhat.spice.0
v4->v5:
* add tracing events
* fix missing comma
* fix help string to show debug is optional
v3->v4:
* updated commit message
v1->v3 changes: (v2 had a wrong commit message)
* removed spice-qemu-char.h, folded into ui/qemu-spice.h
* removed dead IOCTL code
* removed comment
* removed ifdef CONFIG_SPICE from qemu-config.c and qemu-options.hx help.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qxl is a paravirtual graphics card. The qxl device is the bridge
between the guest and the spice server (aka libspice-server). The
spice server will send the rendering commands to the spice client, which
will actually render them.
The spice server is also able to render locally, which is done in case
the guest wants read something from video memory. Local rendering is
also used to support display over vnc and sdl.
qxl is activated using "-vga qxl". qxl supports multihead, additional
cards can be added via '-device qxl".
[ v2: add copyright to files ]
[ v2: use qemu-common.h for standard includes ]
[ v2: create separate qxl-vga device for primary ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add an option to specify the host IP to send multicast packets from,
when using a multicast socket for networking. The option takes an IP
address and sets the IP_MULTICAST_IF socket option, which causes the
packets to use that IP's interface as an egress.
This is useful if the host machine has several interfaces with several
virtual networks across disparate interfaces.
Signed-off-by: Mike Ryan <mikeryan@ISI.EDU>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add -spice command line switch. Has support setting passwd and port for
now. With this patch applied the spice client can successfully connect
to qemu. You can't do anything useful yet though.
This patch adds an optional command line switch '-trace' to specify the
filename to write traces to, when qemu starts.
Eg, If compiled with the 'simple' trace backend,
[temp@system]$ qemu -trace FILENAME IMAGE
Allows the binary traces to be written to FILENAME instead of the option
set at config-time.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This is equivalent to SM_PASSTHROUGH security model.
The only exception is, failure of privilige operation like chown
are ignored. This makes a passthrough like security model usable
for people who runs kvm as non root
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* 'for-anthony' of git://repo.or.cz/qemu/kevin:
Fix -snapshot deleting images on disk change
block: Use error codes from lower levels for error message
block: default to 0 minimal / optiomal I/O size
move 'unsafe' to end of caching modes in help
virtio-blk: Create exit function to unregister savevm
block migration: propagate return value when bdrv_write() returns < 0
ide/atapi: add support for GET EVENT STATUS NOTIFICATION
The lossy option can be used to enable lossy compression
methods like gradient or jpeg. This patch disable them by
default.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Libvirt parses qemu help output to determine qemu features. In particular
it probes for the following: "cache=writethrough|writeback|none". The
addition of the unsafe cache mode was inserted within this string, as
opposed to being added to the end, which impacted libvirt's probe.
Unbreak libvirt by keeping the existing cache modes intact and add
unsafe to the end.
This problem only manifests itself if a caching mode is explicitly
specified in the libvirt xml, in which case older syntax for caching is
passed to qemu, which it no longer understands.
Signed-off-by: Bruce Rogers <brogers@novell.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5989020bc1 introduced a chardev
option to disable signals on stdio. Add the corresponding documentation.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The new option is:
-fsdev fstype,id=myid,path=/share_path/,security_model=[mapped|passthrough]
-virtfs fstype,path=/share_path/,security_model=[mapped|passthrough],mnt_tag=tag
In the case of mapped security model, files are created with QEMU user
credentials and the client-user's credentials are saved in extended attributes.
Whereas in the case of passthrough security model, files on the
filesystem are directly created with client-user's credentials.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Ronnie Sahlberg