Commit Graph

3720 Commits

Author SHA1 Message Date
Cédric Le Goater 0c575703e4 spapr/xive: add hcall support when under KVM
XIVE hcalls are all redirected to QEMU as none are on a fast path.
When necessary, QEMU invokes KVM through specific ioctls to perform
host operations. QEMU should have done the necessary checks before
calling KVM and, in case of failure, H_HARDWARE is simply returned.

H_INT_ESB is a special case that could have been handled under KVM
but the impact on performance was low when under QEMU. Here are some
figures :

    kernel irqchip      OFF          ON
    H_INT_ESB                    KVM   QEMU

    rtl8139 (LSI )      1.19     1.24  1.23  Gbits/sec
    virtio             31.80    42.30   --   Gbits/sec

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513084245.25755-4-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29 11:39:45 +10:00
Cédric Le Goater 38afd772f8 spapr/xive: add KVM support
This introduces a set of helpers when KVM is in use, which create the
KVM XIVE device, initialize the interrupt sources at a KVM level and
connect the interrupt presenters to the vCPU.

They also handle the initialization of the TIMA and the source ESB
memory regions of the controller. These have a different type under
KVM. They are 'ram device' memory mappings, similarly to VFIO, exposed
to the guest and the associated VMAs on the host are populated
dynamically with the appropriate pages using a fault handler.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513084245.25755-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29 11:39:45 +10:00
David Gibson 64d4a53431 spapr: Add forgotten capability to migration stream
spapr machine capabilities are supposed to be sent in the migration stream
so that we can sanity check the source and destination have compatible
configuration.  Unfortunately, when we added the hpt-max-page-size
capability, we forgot to add it to the migration state.  This means that we
can generate spurious warnings when both ends are configured for large
pages, or potentially fail to warn if the source is configured for huge
pages, but the destination is not.

Fixes: 2309832afd "spapr: Maximum (HPT) pagesize property"

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
2019-05-29 11:39:45 +10:00
Cédric Le Goater 13df93244e spapr/xive: fix EQ page addresses above 64GB
The high order bits of the address of the OS event queue is stored in
bits [4-31] of word2 of the XIVE END internal structures and the low
order bits in word3. This structure is using Big Endian ordering and
computing the value requires some simple arithmetic which happens to
be wrong. The mask removing bits [0-3] of word2 is applied to the
wrong value and the resulting address is bogus when above 64GB.

Guests with more than 64GB of RAM will allocate pages for the OS event
queues which will reside above the 64GB limit. In this case, the XIVE
device model will wake up the CPUs in case of a notification, such as
IPIs, but the update of the event queue will be written at the wrong
place in memory. The result is uncertain as the guest memory is
trashed and IPI are not delivered.

Introduce a helper xive_end_qaddr() to compute this value correctly in
all places where it is used.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20190508171946.657-3-clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-05-29 11:39:44 +10:00
Peter Maydell 8c1ecb5904 Various testing updates
- semihosting re-factor (used in system tests)
   - aarch64 and alpha system tests
   - editorconfig tweak for .S
   - some docker image updates
   - iotests clean-up (without make check inclusion)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAlztYToACgkQ+9DbCVqe
 KkQU9wf/Uv5qBgDn9MwcCt8tzHTX/i21QHwFLBbCmFoUwZjSridZ2KV6Ma3ig4mF
 xY+8Cr5oZT186V+aD39K6KCZKqZRulIpRVNkOKXEfAAklUoAyQs95Wa8F8LtO1eG
 vOtOYEdkXQQiAnlnQ+eaGiZQ2mpbCbREa10JrBhxp6iXh0PYcvtD7iAlOldqIvd2
 hDRwOgTtYoiiKh6UdediAgQsRvv6oNPHFUOjWgrGxfhPWKbjCVKl7VS4furg9zux
 j/S0E0xYKhj+JNq3arjiMUMl19TauCBQLrbQpphd1jOl1s7bELRjAuaKM60TVIbW
 Hd2/PYbGnkpyUcJQh0Pr1cb4RMcznw==
 =lvtu
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging

Various testing updates

  - semihosting re-factor (used in system tests)
  - aarch64 and alpha system tests
  - editorconfig tweak for .S
  - some docker image updates
  - iotests clean-up (without make check inclusion)

# gpg: Signature made Tue 28 May 2019 17:26:34 BST
# gpg:                using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8  DF35 FBD0 DB09 5A9E 2A44

* remotes/stsquad/tags/pull-testing-next-280519-2: (27 commits)
  tests/qemu-iotests: re-format output to for make check-block
  tests/qemu-iotests/group: Re-use the "auto" group for tests that can always run
  Makefile.target: support per-target coverage reports
  Makefile: include per-target build directories in coverage report
  Makefile: fix coverage-report reference to BUILD_DIR
  .travis.yml: enable aarch64-softmmu and alpha-softmmu tcg tests
  tests/tcg/alpha: add system boot.S
  tests/tcg/multiarch: expand system memory test to cover more
  tests/tcg/minilib: support %c format char
  tests/tcg/multiarch: move the system memory test
  tests/tcg/aarch64: add system boot.S
  editorconfig: add settings for .s/.S files
  tests/tcg/multiarch: add hello world system test
  tests/tcg/multiarch: add support for multiarch system tests
  tests/docker: Test more components on the Fedora default image
  tests/docker: add ubuntu 18.04
  MAINTAINERS: update for semihostings new home
  target/mips: convert UHI_plog to use common semihosting code
  target/mips: only build mips-semi for softmmu
  target/arm: correct return values for WRITE/READ in arm-semi
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-28 17:38:32 +01:00
Peter Maydell 4bade28288 RISC-V Patches for the 4.1 Soft Freeze, Part 1
This tag contains a handful of patches that I'd like to target for 4.1:
 
 * An emulation for SiFive's GPIO device.
 * A fix to disallow sfence.vma from userspace.
 * Additional decodetree cleanups that should have no functional impact.
 * C extension emulation fidelity fixes that were noticed as part of that
   cleanup process.
 * A new "spike" target, along with the deprecation of a handful of old
   targets and CPUs.
 * Some initial infastructure related to the hypervisor extension.
 * An emulation fidelity fix that prevents prevents arbitrary bits in the
   SIP CSR from being set.
 * A small performance improvement that avoids excessive TLB flushing
   when the ASID does not change.
 
 This time I've used a new testing workflow: I've tested on both 32-bit
 and 64-bit builds of OpenEmbedded, via the default OpenSBI-based boot
 flow.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAlzohuUTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQfcKD/9xSyQld3g41e4qrcq/MHHQhIou0Mpj
 FdJ9jb5k8ndlhJix1RCJorXQ4ld7KPco5ywdQGebEzrSlsI0hanlWkrtBDibR9dU
 OoNjrBRqKAjTQOkIsmgQMW961n9HnfSZNlmm/L1n94TC/6W4/g+hlvDXQNJjyDKX
 u8QalbfNFlolSv11vOxSlVFTo8Cb6/++yBitvbLdNnquWcDgxid6FYWKMEmYB4jK
 pOTzlb0ZDdvS7rGLdMkTB2pTqrvEykP1uLvXpF7qOurGgoeHul2lqKiRuVcFFU46
 6IOsaiwzDtMoUHzuFZypEJfnm0uJ4FEGEK8ZQBXlQhl2c0MDLXzXhIekKZIs/BmG
 K1Anio30zgfJscA6Zv6ZPataeEbPQ/l0LeAgS/Q8n7zIN5oRi3D9kdNTlo1MoSpD
 RLXESf0uXaTxkOAiyQ2hDj/NuPqja4TFD6UKj91eoWIhcga8i4olqsvLmsTsxhCK
 aaaiLGpYnmm/yhmBjMOAeBnu03w0ApTFS2UoPoMvTnrhZI4OXhm9XABEASpzdh57
 5mJL/U8eJ098QSxBui2Sjcpn8mxfy1FHqAQl+urDCAb6/P/94+729LVzyuvEV08U
 IHYMFjO8v4e56Sf6eys6rcPYpPV/jrLnyL8uFODN1PsXY9+OyH/KLCGVb1vyAgsP
 nhE2uPKTnIrPqA==
 =7LvI
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.1-sf0' into staging

RISC-V Patches for the 4.1 Soft Freeze, Part 1

This tag contains a handful of patches that I'd like to target for 4.1:

* An emulation for SiFive's GPIO device.
* A fix to disallow sfence.vma from userspace.
* Additional decodetree cleanups that should have no functional impact.
* C extension emulation fidelity fixes that were noticed as part of that
  cleanup process.
* A new "spike" target, along with the deprecation of a handful of old
  targets and CPUs.
* Some initial infastructure related to the hypervisor extension.
* An emulation fidelity fix that prevents prevents arbitrary bits in the
  SIP CSR from being set.
* A small performance improvement that avoids excessive TLB flushing
  when the ASID does not change.

This time I've used a new testing workflow: I've tested on both 32-bit
and 64-bit builds of OpenEmbedded, via the default OpenSBI-based boot
flow.

# gpg: Signature made Sat 25 May 2019 01:05:57 BST
# gpg:                using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg:                issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg:                 aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88  6DF8 EF4C A150 2CCB AB41

* remotes/palmer/tags/riscv-for-master-4.1-sf0: (29 commits)
  target/riscv: Only flush TLB if SATP.ASID changes
  target/riscv: More accurate handling of `sip` CSR
  target/riscv: Add checks for several RVC reserved operands
  target/riscv: Add the HGATP register masks
  target/riscv: Add the HSTATUS register masks
  target/riscv: Add Hypervisor CSR macros
  target/riscv: Allow setting mstatus virtulisation bits
  target/riscv: Add the MPV and MTL mstatus bits
  target/riscv: Improve the scause logic
  target/riscv: Trigger interrupt on MIP update asynchronously
  target/riscv: Mark privilege level 2 as reserved
  riscv: spike: Add a generic spike machine
  target/riscv: Deprecate the generic no MMU CPUs
  target/riscv: Add a base 32 and 64 bit CPU
  target/riscv: Create settable CPU properties
  riscv: virt: Allow specifying a CPU via commandline
  linux-user/riscv: Add the CPU type as a comment
  target/riscv: Remove unused include of riscv_htif.h for virt board riscv
  target/riscv: Remove spaces from register names
  target/riscv: Split gen_arith_imm into functional and temp
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-28 11:52:53 +01:00
Alex Bennée 4e7f9032cf semihosting: enable chardev backed output for console
It will be useful for a number of use-cases to be able to re-direct
output to a file like we do with serial output. This does the wiring
to allow us to treat then semihosting console like just another
character output device.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-05-28 10:28:50 +01:00
Alex Bennée a331c6d774 semihosting: implement a semihosting console
This provides two functions for handling console output that handle
the common backend behaviour for semihosting.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-05-28 10:28:50 +01:00
Alex Bennée f1672e6f2b semihosting: move semihosting configuration into its own directory
In preparation for having some more common semihosting code let's
excise the current config magic from vl.c into its own file. We shall
later add more conditionals to the build configurations so we can
avoid building this if we don't need it.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-28 10:28:50 +01:00
Alistair Francis 8903bf6e6d
target/riscv: Add a base 32 and 64 bit CPU
At the same time deprecate the ISA string CPUs.

It is dobtful anyone specifies the CPUs, but we are keeping them for the
Spike machine (which is about to be depreated) so we may as well just
mark them as deprecated.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24 12:09:23 -07:00
Fabien Chouteau 30efbf330a
SiFive RISC-V GPIO Device
QEMU model of the GPIO device on the SiFive E300 series SOCs.

The pins are not used by a board definition yet, however this
implementation can already be used to trigger GPIO interrupts from the
software by configuring a pin as both output and input.

Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-05-24 11:58:30 -07:00
Philippe Mathieu-Daudé 948770b0a7 hw/arm/bcm2835: Use object_initialize() on PL011State
To be coherent with the other peripherals contained in the
BCM2835PeripheralState structure, directly allocate the PL011State
(instead of using the pl011 uart as a pointer to a SysBusDevice).

Initialize the PL011State with object_initialize() instead of
object_new().

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190507163416.24647-6-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24 15:29:02 -03:00
Philippe Mathieu-Daudé 0a21950e43 hw/arm/bcm2835: Use TYPE_PL011 instead of hardcoded string
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190507163416.24647-5-philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-05-24 15:29:02 -03:00
Peter Maydell 40575757e1 ramfb: misc improvements.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJc57HbAAoJEEy22O7T6HE4WnIQANWL3c/Zmxq2RU++nD6J59hz
 b3+qAgwp9FZfk8FJPpo8ROY3aOcxGgWR5J8rmvDfiu3pzNa6pMTfptvPn0uRiDbd
 evhtT7rMjcKGVH7WOGuJsWkQ50bFOp59vW79puf4p8B2MtRj6UhOmLVGlYFHivwQ
 4uP8cMgeYe16QxYqn5u7IVv95MULEFEnm+QjU27kHLcLYWcZgU6ExyCr4hLYY96e
 f635/nH8bVYqWERb4xRj5e8pDOeQrlFkURjMrL8BS/ytxekIDdKwsbDwaNI6W81k
 lRzeozLqffYpPk1oRsG+5wAOmCxYbcDH+qzc5gqDNpAo4YHJWxUrwcUJzAgXqNDv
 dBmEtR2Zp4GlJVQeWBrUhLm2+YmJ9YQarscr6S5MV2p3td9OqlBN4Yxykr7hEkTG
 MoSgmtrPKEO92dQGg03psmbTafdGYpAPMp8JJrhG5NbpGZqZku0PJAzYKru3PBWc
 oNQ4YJJpHQUzfkXaC9OIFWXMieCk3wwePO0sD753tZw5jAxv9F6p4qJjZ07+jT0w
 WaRs22kF69RE0u4sUSz/4fo6+KyYFVEiTQz1tIi8Trs0L4l+10jtdeh1Cnu7iZQO
 Pf43itvTNPyz54VOBd5APekYnDAlOOMEW9KwIwoL9Pm8yThQc7uWAUQE1u6F0YVT
 mwwPDoO7XaraBlwMhEt7
 =r71e
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kraxel/tags/vga-20190524-pull-request' into staging

ramfb: misc improvements.

# gpg: Signature made Fri 24 May 2019 09:56:59 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/vga-20190524-pull-request:
  hw/display/ramfb: initialize fw-config space with xres/ yres
  hw/display/ramfb: lock guest resolution after it's set
  hw/display/ramfb: fix guest memory un-mapping

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-24 12:09:23 +01:00
Peter Maydell ceac83e9ba target-arm queue:
* exynos4210: QOM'ify the Exynos4210 SoC
  * exynos4210: Add DMA support for the Exynos4210
  * arm_gicv3: Fix writes to ICC_CTLR_EL3
  * arm_gicv3: Fix write of ICH_VMCR_EL2.{VBPR0, VBPR1}
  * target/arm: Fix vector operation segfault
  * target/arm: Minor improvements to BFXIL, EXTR
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAlzmrL8ZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3rh7D/4yQGoQOxXXe7MPJcjk7K0I
 3jlIM7Lw9JJjdc7fJyC0oNpR6sJEjbT/W+tHzb6f5reAojvloM1nMymCoR829n5w
 nxCjeWkbWo5+UGvDlPx4xLA3NaqKKahjMkPI6oyjDWgzIUZ9nFYMmoGBSGIo/ZhP
 JEJKnUoWpYXRNw8ThjmiOT3LHOLb5Bb2XrVcr5l/f0twqeiykmMbK1hZn7f9HjjF
 Kaa9kiiITxWqvQtOr+mMyMoHJ1PSvOf0FpTU6gisbAf2fcjB0vP3NsFq6PEIs61G
 J/P03qsLZrzc0Rf7b/4DCaFrdQVJ83+J8PnP8YyrubEEKY8z98SaxSkb6K++Tmji
 3bqkk/RhLoP6+WTTvWq3MlLTHmeoAKa1/8DCwzO/tCgkfcRmZgGj+LXC/XR5Nbv9
 YhXTbjNdJ4cuLJykiEodLZ1Yjx31eN6TRs8G/yX7rUbhww/TEOkRDK4MvwL3f/E0
 43QqxQ8jpPmPX1X8P3x7ap9H2qPj/LtVnbs4REURRZpA1xleeY3GDgNR2GGfnHWT
 ZXnV+Q1LSG/xu74l7SUD+5FRp72SANEi3GcMyqfapMc1qLGX/bN/ScATR+32GwSy
 0w0Ht6TIsaoVztLgh/kp3kH9xQm0YsdyaFrn48DP3Hs9iYAA22ycc2AFnaPfV9qK
 0s1zmKLB54tszS5TnXkU/g==
 =AixZ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190523' into staging

target-arm queue:
 * exynos4210: QOM'ify the Exynos4210 SoC
 * exynos4210: Add DMA support for the Exynos4210
 * arm_gicv3: Fix writes to ICC_CTLR_EL3
 * arm_gicv3: Fix write of ICH_VMCR_EL2.{VBPR0, VBPR1}
 * target/arm: Fix vector operation segfault
 * target/arm: Minor improvements to BFXIL, EXTR

# gpg: Signature made Thu 23 May 2019 15:22:55 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190523:
  hw/arm/exynos4210: QOM'ify the Exynos4210 SoC
  hw/arm/exynos4210: Add DMA support for the Exynos4210
  hw/arm/exynos4: Use the IEC binary prefix definitions
  hw/arm/exynos4: Remove unuseful debug code
  hw/intc/arm_gicv3: Fix writes to ICC_CTLR_EL3
  hw/intc/arm_gicv3: Fix write of ICH_VMCR_EL2.{VBPR0, VBPR1}
  arm: Rename hw/arm/arm.h to hw/arm/boot.h
  arm: Remove unnecessary includes of hw/arm/arm.h
  arm: Move system_clock_scale to armv7m_systick.h
  target/arm: Fix vector operation segfault
  target/arm: Simplify BFXIL expansion
  target/arm: Use extract2 for EXTR

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-24 10:16:29 +01:00
Hou Qiming f79081b4b7 hw/display/ramfb: initialize fw-config space with xres/ yres
If xres / yres were specified in QEMU command line, write them as an initial
resolution to the fw-config space on guest reset, which a later BIOS / OVMF
patch can take advantage of.

Signed-off-by: HOU Qiming <hqm03ster@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-id: 20190513115731.17588-4-marcel.apfelbaum@gmail.com
[fixed malformed patch]
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-24 09:10:29 +02:00
Philippe Mathieu-Daudé 98e4f4fdb8 hw/arm/exynos4210: QOM'ify the Exynos4210 SoC
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190520214342.13709-5-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-23 14:47:44 +01:00
Peter Maydell 12ec8bd51e arm: Rename hw/arm/arm.h to hw/arm/boot.h
The header file hw/arm/arm.h now includes only declarations
relating to hw/arm/boot.c functionality. Rename it accordingly,
and adjust its header comment.

The bulk of this commit was created via
 perl -pi -e 's|hw/arm/arm.h|hw/arm/boot.h|' hw/arm/*.c include/hw/arm/*.h

In a few cases we can just delete the #include:
hw/arm/msf2-soc.c, include/hw/arm/aspeed_soc.h and
include/hw/arm/bcm2836.h did not require it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190516163857.6430-4-peter.maydell@linaro.org
2019-05-23 14:47:43 +01:00
Peter Maydell 807420f0b0 arm: Move system_clock_scale to armv7m_systick.h
The system_clock_scale global is used only by the armv7m systick
device; move the extern declaration to the armv7m_systick.h header,
and expand the comment to explain what it is and that it should
ideally be replaced with a different approach.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190516163857.6430-2-peter.maydell@linaro.org
2019-05-23 14:47:43 +01:00
Philippe Mathieu-Daudé b15c0f7d55 hw/nvram/fw_cfg: Add fw_cfg_arch_key_name()
Add fw_cfg_arch_key_name() which returns the name of
an architecture-specific key.

Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190422195020.1494-3-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-23 14:10:31 +02:00
Li Qiang 2d9574bdbe pci: msix: move 'MSIX_CAP_LENGTH' to header file
'MSIX_CAP_LENGTH' is defined in two .c file. Move it
to hw/pci/msix.h file to reduce duplicated code.

CC: qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Message-Id: <20190521151543.92274-5-liq3ea@163.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-05-22 17:35:27 +02:00
Peter Maydell a4f667b671 s390x update:
- have the bios tolerate bootmap signature entries
 - next chunk of vector instruction support in tcg
 - a headers update against Linux 5.2-rc1
 - add more facilities and gen15 machines to the cpu model
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEw9DWbcNiT/aowBjO3s9rk8bwL68FAlzkFK8SHGNvaHVja0By
 ZWRoYXQuY29tAAoJEN7Pa5PG8C+vV40P/38Q1yqqfQSc6Q7f/xwXLHFnrhuXCHgG
 5BNhGoX+L8ywaQwkX9CndpkbI4BGixzbEPgQ4sf9SQjNvsecTujC2LBV/IZsYQ9N
 dAFxGQbxCVibMWJZUYvyNpgjkwB/XQbGvZKUSFCsqZ308dG//KkGQrlz8HuWOnOe
 qvUUCD8aTe9zX2mCouoBjCv2F+X/piFHubTB2OeYz0NVVIC0AcXbhqenzKqUu3vL
 /UL7qY2ThAiPBNYIoZTKHT1b80o2k0x+JQnFbYq8O03h5hXwR5D4lo8IYxm92xRG
 Xafc33H0k+fIwXUJJUdBsKjZh9fy2eMLoFa/qRE0vlv8g29EDLCFm+CPqGp7otEb
 3i96EOBjAYwT7b23mC2VSVDMCRMmIR5No7PnjllsH8slLz80plF0r/Wj52KQX4ba
 GLWvD6H4KZ0g5tiTgE8m/C5t9+5komll7EDDGfh+HTl/9EpUoESx3r9FXKzxsZFW
 ANuG8nmGnafGvmGvmqPOv6d6BbWsfqV2H8T+yqh+EIftBxM0o7HtAv95hlyOO2xj
 W6/gKIQMMrAwLETFdQLOsDsnRp6zimIYIvLQ33WIqC77YX0Hn6/tSrfPDm1sDvmh
 JfxY9pxUVfiPjIzzvDgyf5ZBhPmsYeXrpqx90cX9QVKDYNcdBP7y9c7Rqj4oZ2qm
 rfCtaFMmOb3c
 =+HXM
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20190521-3' into staging

s390x update:
- have the bios tolerate bootmap signature entries
- next chunk of vector instruction support in tcg
- a headers update against Linux 5.2-rc1
- add more facilities and gen15 machines to the cpu model

# gpg: Signature made Tue 21 May 2019 16:09:35 BST
# gpg:                using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg:                issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20190521-3: (55 commits)
  s390x/cpumodel: wire up 8561 and 8562 as gen15 machines
  s390x/cpumodel: add gen15 defintions
  s390x/cpumodel: add Deflate-conversion facility
  s390x/cpumodel: enhanced sort facility
  s390x/cpumodel: vector enhancements
  s390x/cpumodel: msa9 facility
  s390x/cpumodel: Miscellaneous-Instruction-Extensions Facility 3
  s390x/cpumodel: ignore csske for expansion
  linux headers: update against Linux 5.2-rc1
  update-linux-headers: handle new header file
  s390x/tcg: Implement VECTOR TEST UNDER MASK
  s390x/tcg: Implement VECTOR SUM ACROSS WORD
  s390x/tcg: Implement VECTOR SUM ACROSS QUADWORD
  s390x/tcg: Implement VECTOR SUM ACROSS DOUBLEWORD
  s390x/tcg: Implement VECTOR SUBTRACT WITH BORROW COMPUTE BORROW INDICATION
  s390x/tcg: Implement VECTOR SUBTRACT WITH BORROW INDICATION
  s390x/tcg: Implement VECTOR SUBTRACT COMPUTE BORROW INDICATION
  s390x/tcg: Implement VECTOR SUBTRACT
  s390x/tcg: Implement VECTOR SHIFT RIGHT LOGICAL *
  s390x/tcg: Implement VECTOR SHIFT RIGHT ARITHMETIC
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-21 16:30:13 +01:00
David Gibson b0e5196a52 pci: Simplify pci_bus_is_root()
pci_bus_is_root() currently relies on a method in the PCIBusClass.
But it's always known if a PCI bus is a root bus when we create it, so
using a dynamic method is overkill.

This replaces it with an IS_ROOT bit in a new flags field, which is set on
root buses and otherwise clear.  As a bonus this removes the special
is_root logic from pci_expander_bridge, since it already creates its bus
as a root bus.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20190424041959.4087-3-david@gibson.dropbear.id.au>
2019-05-20 18:40:02 -04:00
Wei Yang 48cefd94c7 hw/arm/virt-acpi-build: pass AcpiMcfgInfo to build_mcfg()
To build MCFG, two information is necessary:

    * bus number
    * base address

Abstract these two information to AcpiMcfgInfo so that build_mcfg and
build_mcfg_q35 will have the same declaration.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>

Message-Id: <20190419003053.8260-5-richardw.yang@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Xie Yongji 77542d4314 vhost-user-blk: Add support to reconnect backend
Since we now support the message VHOST_USER_GET_INFLIGHT_FD
and VHOST_USER_SET_INFLIGHT_FD. The backend is able to restart
safely because it can track inflight I/O in shared memory.
This patch allows qemu to reconnect the backend after
connection closed.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Ni Xun <nixun@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-7-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Xie Yongji badaf79cfd virtio: Introduce started flag to VirtioDevice
The virtio 1.0 transitional devices support driver uses the device
before setting the DRIVER_OK status bit. So we introduce a started
flag to indicate whether driver has started the device or not.

Signed-off-by: Xie Yongji <xieyongji@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Message-Id: <20190320112646.3712-2-xieyongji@baidu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Daniel P. Berrangé 8fa70dbd8b Revert "globals: Allow global properties to be optional"
This reverts commit d7741743f4.

Relying on setting properties on parents types which may not
be relevant to certain sub-classes had unexpected side-effects
causing bugs in device config defaults. It is preferrable to
be explicit about which devices get which properties, even if
this needs repetition.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190215103239.28640-3-berrange@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-05-20 18:40:02 -04:00
Peter Maydell 27cb89d1d3 Mostly bugfixes and cleanups, the most important being
"megasas: fix mapped frame size" from Peter Lieven.
 In addition, -realtime is marked as deprecated.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJc3rY3AAoJEL/70l94x66D91kH/21LLnL+sKmyueSM/Sek4id2
 r06tHdGMdl5Od3I5uMD9gnr4AriiCZc9ybQDQ1N879wKMmQPZwcnf2GJ5DZ0wa3L
 jHoQO07Bg0KZGWALjXiN5PWB0DlJtXsTm0C4q4tnt6V/ueasjxouBk9/fRLRc09n
 QTS379X9QvPElFTv3WPfGz6kmkLq8VMmdRnSlXneB9xTyXXJbFj3zlvDCElNSgWh
 fZ7gnfYWB1LOC19HJxp1mJSkAUD5AgImYEK1Hmnr+BMs2sg6gypYNtp3LtE5FzmZ
 HSdXYFyPkQV9UyTiV1XBs3bXJbGYj5OApfXCtwo/I2JtP+LhHBA2eq1Gs3QgP98=
 =zSSj
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

Mostly bugfixes and cleanups, the most important being
"megasas: fix mapped frame size" from Peter Lieven.
In addition, -realtime is marked as deprecated.

# gpg: Signature made Fri 17 May 2019 14:25:11 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (21 commits)
  hw/net/ne2000: Extract the PCI device from the chipset common code
  hw/char: Move multi-serial devices into separate file
  ioapic: allow buggy guests mishandling level-triggered interrupts to make progress
  build: don't build hardware objects with linux-user
  build: chardev is only needed for softmmu targets
  configure: qemu-ga is only needed with softmmu targets
  build: replace GENERATED_FILES by generated-files-y
  trace: only include trace-event-subdirs when they are needed
  sun4m: obey -vga none
  mips-fulong2e: obey -vga none
  hw/i386/acpi: Assert a pointer is not null BEFORE using it
  hw/i386/acpi: Add object_resolve_type_unambiguous to improve modularity
  hw/acpi/piix4: Move TYPE_PIIX4_PM to a public header
  memory: correct the comment to DIRTY_MEMORY_MIGRATION
  vl: fix -sandbox parsing crash when seccomp support is disabled
  hvf: Add missing break statement
  megasas: fix mapped frame size
  vl: Add missing descriptions to the VGA adapters list
  Declare -realtime as deprecated
  roms: assert if max rom size is less than the used size
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-17 16:17:34 +01:00
Peter Maydell f2a930ad8c qemu-sparc queue
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEzGIauY6CIA2RXMnEW8LFb64PMh8FAlzef04eHG1hcmsuY2F2
 ZS1heWxhbmRAaWxhbmRlLmNvLnVrAAoJEFvCxW+uDzIfsIcIAJYsAv59etzYmqCA
 rGvoma0FypA3SO2+zeqqH8r0b/gaO7b56aXxTIAVhPvf3mskwQ+ffVsxRZ+zIflj
 CCo/PM4OBhqiOvK0qbbOxB0MmrrfGxMKrkUq0tuUubRH3T9fE5TSN3m3ObAHxgvq
 wZFYmeOmlAOhqyqAWARP0xVPNRNcWTVdThSA6viW1FedWsxtMV/Om4bXmidTY7nm
 CKAMdndqqYAgE9oVgFzfd46db4AGWKKIcTS+mrm8Y61hB1YuG7r+Bgu9qFcnjgcV
 AHeGbRDZ0LY0jsAXZkAbRpYyCOsuYW6+yaDKt9h6meLJ7jpzonw4lARFFJtb9a/4
 Kt6RBm0=
 =UzYZ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20190517' into staging

qemu-sparc queue

# gpg: Signature made Fri 17 May 2019 10:30:54 BST
# gpg:                using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg:                issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C  C9C4 5BC2 C56F AE0F 321F

* remotes/mcayland/tags/qemu-sparc-20190517:
  MAINTAINERS: add myself for leon3
  leon3: introduce the plug and play mechanism
  leon3: add a little bootloader
  grlib, apbuart: get rid of the old-style create function
  grlib, gptimer: get rid of the old-style create function
  grlib, irqmp: get rid of the old-style create function
  leon3: fix the error message when no bios are provided
  hw/char/escc: Lower irq when transmit buffer is filled

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-17 15:46:37 +01:00
Vitaly Kuznetsov 958a01dab8 ioapic: allow buggy guests mishandling level-triggered interrupts to make progress
It was found that Hyper-V 2016 on KVM in some configurations (q35 machine +
piix4-usb-uhci) hangs on boot. Root-cause was that one of Hyper-V
level-triggered interrupt handler performs EOI before fixing the cause of
the interrupt. This results in IOAPIC keep re-raising the level-triggered
interrupt after EOI because irq-line remains asserted.

Gory details: https://www.spinics.net/lists/kvm/msg184484.html
(the whole thread).

Turns out we were dealing with similar issues before; in-kernel IOAPIC
implementation has commit 184564efae4d ("kvm: ioapic: conditionally delay
irq delivery duringeoi broadcast") which describes a very similar issue.

Steal the idea from the above mentioned commit for IOAPIC implementation in
QEMU. SUCCESSIVE_IRQ_MAX_COUNT, delay and the comment are borrowed as well.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20190402080215.10747-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-17 15:19:39 +02:00
Philippe Mathieu-Daudé 81c48dd796 hw/i386/acpi: Add object_resolve_type_unambiguous to improve modularity
When building with CONFIG_Q35=n, we get:

    LINK    x86_64-softmmu/qemu-system-x86_64
  /usr/bin/ld: hw/i386/acpi-build.o: in function `acpi_get_misc_info':
  /source/qemu/hw/i386/acpi-build.c:243: undefined reference to `ich9_lpc_find'
  collect2: error: ld returned 1 exit status
  make[1]: *** [Makefile:204: qemu-system-x86_64] Error 1

This is due to a dependency in acpi-build.c on the ICH9_LPC
(via ich9_lpc_find) and PIIX4_PM (via piix4_pm_find) devices.

To allow better modularity (compile acpi-build.c with only
Q35/ICH9 or ISAPC/PIIX4), refactor the similar helper as
object_resolve_type_unambiguous(). This way we relax the
linker dependencies and can build the x86 targets with a
selection of machines (instead of all of them).

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427144025.22880-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-17 15:19:24 +02:00
Philippe Mathieu-Daudé f5e0a8f42f hw/acpi/piix4: Move TYPE_PIIX4_PM to a public header
Move the TYPE_PIIX4_PM definition to the corresponding header,
so other files can use it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190427144025.22880-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-17 15:19:19 +02:00
Jason Wang 23bfaf77fa vhost_net: don't set backend for the uninitialized virtqueue
We used to set backend unconditionally, this won't work for some
guests (e.g windows driver) who may not initialize all virtqueues. For
kernel backend, this will fail since it may try to validate the rings
during setting backend.

Fixing this by simply skipping the backend set when we find desc is
not ready.

Reviewed-by: Michael S. Tsirkin<mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-05-17 17:00:12 +08:00
KONRAD Frederic 162abf1a83 leon3: introduce the plug and play mechanism
This adds the AHB and APB plug and play devices.
They are scanned during the linux boot to discover the various peripheral.

Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-05-17 09:17:11 +01:00
KONRAD Frederic b70447aaea grlib, apbuart: get rid of the old-style create function
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-05-17 09:17:11 +01:00
KONRAD Frederic 948caec873 grlib, gptimer: get rid of the old-style create function
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-05-17 09:17:11 +01:00
KONRAD Frederic ea005daec3 grlib, irqmp: get rid of the old-style create function
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2019-05-17 09:17:11 +01:00
Cornelia Huck 85fa94e169 s390/css: handle CCW_FLAG_SKIP
If a ccw has CCW_FLAG_SKIP set, and the command is of type
read, read backwards, or sense, no data should be written
to the guest for that command.

Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20190516133327.11430-1-cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-05-17 08:16:02 +02:00
Peter Maydell 01807c8b0e Miscellaneous patches for 2019-05-13
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJc2RbiAAoJEDhwtADrkYZTfpAP/itXg+X9wRfMeerni6SAkgtz
 knaLtJNC7YvwH7W6TIkSf2QgMrg/nYzIXxxj6V+Y3Vdn4CD93C7ldItWkm33amlA
 SEhREHpAn4F3wg/LsOGYYgpuqF/wrUcZsmzudnslfMd3mM6Q9Q6J3q6mu8n1oRcl
 RRKlk++ElqyRdvmxFhddhPxk797Vuunh76vd3ARUFmzKs2n7CGkeBu+qbk41VqI9
 YtjmWHO6BDY5b01PvjuWPir6n1yJsYcpfo3ZElZvPf5jQHMmO6fGB3SZc/PIWegq
 gAVeoXtwhNm+nywMpIv1wHQMkvRDZW0wrurIQBc4VGpH1Pa90dR9FNVZ8r0OZqPB
 aErPCdC7ED73uzJwzXKTnLxY0XDgdhsAsW7lFggANs6YyewZNcbDaVhZWsopTTK/
 3jBbddIw2RsfHNQgXlFVVzjZJGHBNHxFjAFASCKcapUWQwDKU42kQrS1GqxG56NI
 Lgi8Ce+Q0GsVF4wme96Oa/8EMRfmNvsHMfWQvmqGqA1OACSOf2PSGCeD618A5gq6
 kV6wF4v5HdGFkc0x9Vr5ur7kv3eOhpzFzBM6XJXe3CyqnYrkNuBldkyGZBbrNY7G
 aW5sR26Is4m9i+7159cNB5LmnfQqtsscibkSC0UQiXcuWgevd6cdiF+0r1YuNp7C
 Faa2yPOHs4mHCjUwade9
 =yKfZ
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2019-05-13' into staging

Miscellaneous patches for 2019-05-13

# gpg: Signature made Mon 13 May 2019 08:04:02 BST
# gpg:                using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-misc-2019-05-13:
  Clean up decorations and whitespace around header guards
  Normalize header guard symbol definition.
  Clean up ill-advised or unusual header guards
  Clean up header guards that don't match their file name
  target/xtensa: Clean up core-isa.h header guards
  linux-user/nios2 linux-user/riscv: Clean up header guards
  authz: Normalize #include "authz/trace.h" to "trace.h"
  Use #include "..." for our own headers, <...> for others
  Clean up includes

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-13 13:55:13 +01:00
Markus Armbruster 6834c3f410 Clean up decorations and whitespace around header guards
Cleaned up with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-9-armbru@redhat.com>
2019-05-13 08:58:55 +02:00
Markus Armbruster 177d9e0da0 Normalize header guard symbol definition.
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.

Done with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-8-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-05-13 08:58:55 +02:00
Markus Armbruster a8b991b52d Clean up ill-advised or unusual header guards
Leading underscores are ill-advised because such identifiers are
reserved.  Trailing underscores are merely ugly.  Strip both.

Our header guards commonly end in _H.  Normalize the exceptions.

Done with scripts/clean-header-guards.pl.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Changes to slirp/ dropped, as we're about to spin it off]
2019-05-13 08:58:55 +02:00
Markus Armbruster 58ea30f514 Clean up header guards that don't match their file name
Header guard symbols should match their file name to make guard
collisions less likely.

Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
2019-05-13 08:58:55 +02:00
Markus Armbruster bbfff19688 Clean up includes
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:

    contrib/libvhost-user/libvhost-user-glib.h
    contrib/libvhost-user/libvhost-user.c
    contrib/libvhost-user/libvhost-user.h
    linux-user/mips64/cpu_loop.c
    linux-user/mips64/signal.c
    linux-user/sparc64/cpu_loop.c
    linux-user/sparc64/signal.c
    linux-user/x86_64/cpu_loop.c
    linux-user/x86_64/signal.c
    slirp/src/*
    target/s390x/gen-features.c
    tests/fp/platform.h
    tests/migration/s390x/a-b-bios.c
    tests/test-rcu-simpleq.c
    tests/test-rcu-tailq.c
    tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c

We're in the process of spinning out slirp/.  tests/fp/platform.h is
has to include qemu/osdep.h because tests/fp/berkeley-softfloat-3/ and
tests/fp/berkeley-testfloat-3/ don't.  tests/uefi-test-tools/ is guest
software.  The remaining reverts are the same as in commit
b7d89466dd.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190313162812.8885-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Revert change to tests/fp/platform.h, adjust commit message]
2019-05-13 08:58:55 +02:00
Marc-André Lureau 9c4d05b741 Add vhost-user-input-pci
Add a new virtio-input device, which connects to a vhost-user
backend.

Instead of reading configuration directly from an input device /
evdev (like virtio-input-host), it reads it over vhost-user protocol
with {SET,GET}_CONFIG messages. The vhost-user-backend handles the
queues & events setup.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190503130034.24916-5-marcandre.lureau@redhat.com

[ kraxel: drop -{non-,}transitional variants ]
[ kraxel: fix "make check" on !linux ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-10 14:52:47 +02:00
Peter Maydell 629d166994 target-arm queue:
* Stop using variable length array in dc_zva
  * Implement M-profile XPSR GE bits
  * Don't enable ARMV7M_EXCP_DEBUG from reset
  * armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
  * armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
  * fix various minor issues to allow building for Windows-on-ARM64
  * aspeed: Set SDRAM size
  * Allow system registers for KVM guests to be changed by QEMU code
  * raspi: Diagnose requests for too much RAM
  * virt: Support firmware configuration with -blockdev
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAlzRcyIZHHBldGVyLm1h
 eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3lynD/0eOoNsA64b8GeY2OBgmYbc
 tNhgby30IhiiEiSdFK6cnKSq5MkqakGXwWQ5j7aYSjRV3frJD9unZO3yZ0FwlXmM
 PZ9qlvC3AW/TcFiV6nF0uJTh5EFdiV3iPsyRYC9b9Zm+tjAg79OchDp7qOH4vq0W
 rylkvQpbZrI/0poKDu/Efuq10fbT/aj9IwmO2EjWSGpt0R9rFYKFaaIKB0I1yrNQ
 V+JXMCYm39IUP0Zri9Hva67GvWotS6w1Z4J1v5epv2UNAS++LQlL16Mal7EHP9eI
 FWu7dfDUa9g78/ct1/ZEuG0myE9CiWEgpo1zzdLaokKgeZfsrvFYz3Y1zc14cMGh
 O1SuEQbsrrZX9CizYN8iPsFXP631mxk/Bz8jKklxa8L1JAW6RLpXtS8KZCMF+O6B
 PDzx7Tmxg08nG+PtMOD8jOV+cgMji2EFXeF5ojSCOpWyWKidnNUYRdubHDVU7yJR
 SRItNioTrEWQQOW7hiqhedi5QflObfdOUtrAi7i2NTuCaGqNIxkhSWaerCyJ0eli
 rlLctAXjqgU/APp66RdwtgrVnGyPs8hvgWsrHVC6yPLArkn0HpghH53VfijwGObZ
 e6iIRh4UvN94Vp3fGx1ADWkxAcZNi10zxzLFKjSCBpN0izIoNy3qLNEyD9QNK22c
 8AcNj9nR7ZzhLRkpW7sv0A==
 =hcal
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20190507' into staging

target-arm queue:
 * Stop using variable length array in dc_zva
 * Implement M-profile XPSR GE bits
 * Don't enable ARMV7M_EXCP_DEBUG from reset
 * armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
 * armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
 * fix various minor issues to allow building for Windows-on-ARM64
 * aspeed: Set SDRAM size
 * Allow system registers for KVM guests to be changed by QEMU code
 * raspi: Diagnose requests for too much RAM
 * virt: Support firmware configuration with -blockdev

# gpg: Signature made Tue 07 May 2019 12:59:30 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20190507:
  target/arm: Stop using variable length array in dc_zva
  target/arm: Implement XPSR GE bits
  hw/intc/armv7m_nvic: Don't enable ARMV7M_EXCP_DEBUG from reset
  hw/intc/armv7m_nvic: NS BFAR and BFSR are RAZ/WI if BFHFNMINS == 0
  hw/arm/armv7m_nvic: Check subpriority in nvic_recompute_state_secure()
  osdep: Fix mingw compilation regarding stdio formats
  util/cacheinfo: Use uint64_t on LLP64 model to satisfy Windows ARM64
  qga: Fix mingw compilation warnings on enum conversion
  QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targets
  arm: aspeed: Set SDRAM size
  arm: Allow system registers for KVM guests to be changed by QEMU code
  hw/arm/raspi: Diagnose requests for too much RAM
  hw/arm/virt: Support firmware configuration with -blockdev
  pflash_cfi01: New pflash_cfi01_legacy_drive()
  pc: Rearrange pc_system_firmware_init()'s legacy -drive loop

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-08 00:06:43 +01:00
Joel Stanley a9df9622bc arm: aspeed: Set SDRAM size
We currently use Qemu's default of 128MB. As we know how much ram each
machine ships with, make it easier on users by setting a default.

It can still be overridden with -m on the command line.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20190503022958.1394-1-joel@jms.id.au
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-07 12:55:02 +01:00
Markus Armbruster e0561e60f1 hw/arm/virt: Support firmware configuration with -blockdev
The ARM virt machines put firmware in flash memory.  To configure it,
you use -drive if=pflash,unit=0,... and optionally -drive
if=pflash,unit=1,...

Why two -drive?  This permits setting up one part of the flash memory
read-only, and the other part read/write.  It also makes upgrading
firmware on the host easier.  Below the hood, we get two separate
flash devices, because we were too lazy to improve our flash device
models to support sector protection.

The problem at hand is to do the same with -blockdev somehow, as one
more step towards deprecating -drive.

We recently solved this problem for x86 PC machines, in commit
ebc29e1bea.  See the commit message for design rationale.

This commit solves it for ARM virt basically the same way: new machine
properties pflash0, pflash1 forward to the onboard flash devices'
properties.  Requires creating the onboard devices in the
.instance_init() method virt_instance_init().  The existing code to
pick up drives defined with -drive if=pflash is replaced by code to
desugar into the machine properties.

There are a few behavioral differences, though:

* The flash devices are always present (x86: only present if
  configured)

* Flash base addresses and sizes are fixed (x86: sizes depend on
  images, mapped back to back below a fixed address)

* -bios configures contents of first pflash (x86: -bios configures ROM
   contents)

* -bios is rejected when first pflash is also configured with -machine
   pflash0=... (x86: bios is silently ignored then)

* -machine pflash1=... does not require -machine pflash0=... (x86: it
   does).

The actual code is a bit simpler than for x86 mostly due to the first
two differences.

Before the patch, all the action is in create_flash(), called from the
machine's .init() method machvirt_init():

    main()
        machine_run_board_init()
            machvirt_init()
                create_flash()
                    create_one_flash() for flash[0]
                        create
                        configure
                            includes obeying -drive if=pflash,unit=0
                        realize
                        map
                        fall back to -bios
                    create_one_flash() for flash[1]
                        create
                        configure
                            includes obeying -drive if=pflash,unit=1
                        realize
                        map
                    update FDT

To make the machine properties work, we need to move device creation
to its .instance_init() method virt_instance_init().

Another complication is machvirt_init()'s computation of
@firmware_loaded: it predicts what create_flash() will do.  Instead of
predicting what create_flash()'s replacement virt_firmware_init() will
do, I decided to have virt_firmware_init() return what it did.
Requires calling it a bit earlier.

Resulting call tree:

    main()
        current_machine = object_new()
            ...
                virt_instance_init()
                    virt_flash_create()
                        virt_flash_create1() for flash[0]
                            create
                            configure: set defaults
                            become child of machine [NEW]
                            add machine prop pflash0 as alias for drive [NEW]
                        virt_flash_create1() for flash[1]
                            create
                            configure: set defaults
                            become child of machine [NEW]
                            add machine prop pflash1 as alias for drive [NEW]
        for all machine props from the command line: machine_set_property()
            ...
                property_set_alias() for machine props pflash0, pflash1
                    ...
                        set_drive() for cfi.pflash01 prop drive
                            this is how -machine pflash0=... etc set
        machine_run_board_init(current_machine);
            virt_firmware_init()
                pflash_cfi01_legacy_drive()
                    legacy -drive if=pflash,unit=0 and =1 [NEW]
                virt_flash_map()
                    virt_flash_map1() for flash[0]
                        configure: num-blocks
                        realize
                        map
                    virt_flash_map1() for flash[1]
                        configure: num-blocks
                        realize
                        map
                fall back to -bios
            virt_flash_fdt()
                update FDT

You have László to thank for making me explain this in detail.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20190416091348.26075-4-armbru@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-07 12:55:02 +01:00
Markus Armbruster 2d731dbd5e pflash_cfi01: New pflash_cfi01_legacy_drive()
Factored out of pc_system_firmware_init() so the next commit can reuse
it in hw/arm/virt.c.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190416091348.26075-3-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-07 12:55:02 +01:00
Paolo Bonzini 6306cae275 i2c-ddc: move it to hw/display
Move it together with the other EDID code.  hw/i2c should only
include the core and the adapters, not the slaves.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20190325155923.30987-1-pbonzini@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-07 09:56:10 +02:00