Add support for up to 64 LBA formats through the LBAFEE field of the
Host Behavior Support feature.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
There is no need to extract the format command parameters for each
namespace. Move it to the entry point.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Add support for getting and setting the Host Behavior Support feature.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Naveen Nagar <naveen.n1@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Co-authored-by: ardxwe <ardxwe@gmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220211043920.28981-7-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Co-authored-by: ardxwe <ardxwe@gmail.com>
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220211043920.28981-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch updates the SPI_DEVICE, SPI_HOST0, SPI_HOST1
base addresses. Also adds these as unimplemented devices.
The address references can be found [1].
[1] 6c317992fb/hw/top_earlgrey/sw/autogen/top_earlgrey_memory.h (L107)
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220218063839.405082-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To facilitate software development of RISC-V systems with large number
of HARTs, we increase the maximum number of allowed CPUs to 512 (2^9).
We also add a detailed source level comments about limit defines which
impact the physical address space utilization.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-Id: <20220220085526.808674-6-anup@brainfault.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We have two new machine options "aia" and "aia-guests" available
for the RISC-V virt machine so let's document these options.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-Id: <20220220085526.808674-5-anup@brainfault.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We extend virt machine to emulate both AIA IMSIC and AIA APLIC
devices only when "aia=aplic-imsic" parameter is passed along
with machine name in the QEMU command-line. The AIA IMSIC is
only a per-HART MSI controller so we use AIA APLIC in MSI-mode
to forward all wired interrupts as MSIs to the AIA IMSIC.
We also provide "aia-guests=<xyz>" parameter which can be used
to specify number of VS-level AIA IMSIC Guests MMIO pages for
each HART.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220220085526.808674-4-anup@brainfault.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V AIA (Advanced Interrupt Architecture) defines a new
interrupt controller for MSIs (message signal interrupts) called
IMSIC (Incoming Message Signal Interrupt Controller). The IMSIC
is per-HART device and also suppport virtualizaiton of MSIs using
dedicated VS-level guest interrupt files.
This patch adds device emulation for RISC-V AIA IMSIC which
supports M-level, S-level, and VS-level MSIs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Message-Id: <20220220085526.808674-3-anup@brainfault.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We extend virt machine to emulate AIA APLIC devices only when
"aia=aplic" parameter is passed along with machine name in QEMU
command-line. When "aia=none" or not specified then we fallback
to original PLIC device emulation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220220085526.808674-2-anup@brainfault.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While changing to the use of cfg_ptr, the conditions for REQUIRE_ZB[ABCS]
inadvertently became inverted and slipped through the initial testing (which
used RV64GC_XVentanaCondOps as a target).
This fixes the regression.
Tested against SPEC2017 w/ GCC 12 (prerelease) for RV64GC_zba_zbb_zbc_zbs.
Fixes: f2a32bec8f ("target/riscv: access cfg structure through DisasContext")
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220203153946.2676353-1-philipp.tomsich@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
A bit of a mix this time:
* Minor fixes from myself, Hanna, and Jack
* VNC password rework by Stefan and Fabian
* Postcopy changes from Peter X that are
the start of a larger series to come
* Removing the prehistoic load_state_old
code from Peter M
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
-----BEGIN PGP SIGNATURE-----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=L5uY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgilbert-gitlab/tags/pull-migration-20220302b' into staging
Migration/HMP/Virtio pull 2022-03-02
A bit of a mix this time:
* Minor fixes from myself, Hanna, and Jack
* VNC password rework by Stefan and Fabian
* Postcopy changes from Peter X that are
the start of a larger series to come
* Removing the prehistoic load_state_old
code from Peter M
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Wed 02 Mar 2022 18:25:12 GMT
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-migration-20220302b:
migration: Remove load_state_old and minimum_version_id_old
tests: Pass in MigrateStart** into test_migrate_start()
migration: Add migration_incoming_transport_cleanup()
migration: postcopy_pause_fault_thread() never fails
migration: Enlarge postcopy recovery to capture !-EIO too
migration: Move static var in ram_block_from_stream() into global
migration: Add postcopy_thread_create()
migration: Dump ramblock and offset too when non-same-page detected
migration: Introduce postcopy channels on dest node
migration: Tracepoint change in postcopy-run bottom half
migration: Finer grained tracepoints for POSTCOPY_LISTEN
migration: Dump sub-cmd name in loadvm_process_command tp
migration/rdma: set the REUSEADDR option for destination
qapi/monitor: allow VNC display id in set/expire_password
qapi/monitor: refactor set/expire_password with enums
monitor/hmp: add support for flag argument with value
virtiofsd: Let meson check for statx.stx_mnt_id
clock-vmstate: Add missing END_OF_LIST
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In commit 6e657e64cd in 2013 we added some autorelease pools to
deal with complaints from macOS when we made calls into Cocoa from
threads that didn't have automatically created autorelease pools.
Later on, macOS got stricter about forbidding cross-thread Cocoa
calls, and in commit 5588840ff7 we restructured the code to
avoid them. This left the autorelease pool creation in several
functions without any purpose; delete it.
We still need the pool in cocoa_refresh() for the clipboard related
code which is called directly there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220224101330.967429-3-peter.maydell@linaro.org
The updateUIInfo method makes Cocoa API calls. It also calls back
into QEMU functions like dpy_set_ui_info(). To do this safely, we
need to follow two rules:
* Cocoa API calls are made on the Cocoa UI thread
* When calling back into QEMU we must hold the iothread lock
Fix the places where we got this wrong, by taking the iothread lock
while executing updateUIInfo, and moving the call in cocoa_switch()
inside the dispatch_async block.
Some of the Cocoa UI methods which call updateUIInfo are invoked as
part of the initial application startup, while we're still doing the
little cross-thread dance described in the comment just above
call_qemu_main(). This meant they were calling back into the QEMU UI
layer before we'd actually finished initializing our display and
registered the DisplayChangeListener, which isn't really valid. Once
updateUIInfo takes the iothread lock, we no longer get away with
this, because during this startup phase the iothread lock is held by
the QEMU main-loop thread which is waiting for us to finish our
display initialization. So we must suppress updateUIInfo until
applicationDidFinishLaunching allows the QEMU main-loop thread to
continue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220224101330.967429-2-peter.maydell@linaro.org
When we're using KVM, the PSCI implementation is provided by the
kernel, but QEMU has to tell the guest about it via the device tree.
Currently we look at the KVM_CAP_ARM_PSCI_0_2 capability to determine
if the kernel is providing at least PSCI 0.2, but if the kernel
provides a newer version than that we will still only tell the guest
it has PSCI 0.2. (This is fairly harmless; it just means the guest
won't use newer parts of the PSCI API.)
The kernel exposes the specific PSCI version it is implementing via
the ONE_REG API; use this to report in the dtb that the PSCI
implementation is 1.0-compatible if appropriate. (The device tree
binding currently only distinguishes "pre-0.2", "0.2-compatible" and
"1.0-compatible".)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 20220224134655.1207865-1-peter.maydell@linaro.org
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
4k or 16k pages.
This introduces the DS bit to TCR_ELx, which is RES0 unless the
page size is enabled and supports LPA2, resulting in the effective
value of DS for a given table walk. The DS bit changes the format
of the page table descriptor slightly, moving the PS field out to
TCR so that all pages have the same sharability and repurposing
those bits of the page table descriptor for the highest bits of
the output address.
Do not yet enable FEAT_LPA2; we need extra plumbing to avoid
tickling an old kernel bug.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We support 16k pages, but do not advertize that in ID_AA64MMFR0.
The value 0 in the TGRAN*_2 fields indicates that stage2 lookups defer
to the same support as stage1 lookups. This setting is deprecated, so
indicate support for all stage2 page sizes directly.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20220301215958.157011-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For FEAT_LPA2, we will need other ARMVAParameters, which themselves
depend on the translation granule in use. We might as well validate
that the given TG matches; the architecture "does not require that
the instruction invalidates any entries" if this is not true.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The shift of the BaseADDR field depends on the translation
granule in use.
Fixes: 84940ed825 ("target/arm: Add support for FEAT_TLBIRANGE")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Merge tlbi_aa64_range_get_length and tlbi_aa64_range_get_base,
returning a structure containing both results. Pass in the
ARMMMUIdx, rather than the digested two_ranges boolean.
This is in preparation for FEAT_LPA2, where the interpretation
of 'value' depends on the effective value of DS for the regime.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With FEAT_LPA2, rather than introducing translation level 4,
we introduce level -1, below the current level 0. Extend
arm_fi_to_lfsc to handle these faults.
Assert that this new translation level does not leak into
fault types for which it is not defined, which allows some
masking of fi->level to be removed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature widens physical addresses (and intermediate physical
addresses for 2-stage translation) from 48 to 52 bits, when using
64k pages. The only thing left at this point is to handle the
extra bits in the TTBR and in the table descriptors.
Note that PAR_EL1 and HPFAR_EL2 are nominally extended, but we don't
mask out the high bits when writing to those registers, so no changes
are required there.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This feature is relatively small, as it applies only to
64k pages and thus requires no additional changes to the
table descriptor walking algorithm, only a change to the
minimum TSZ (which is the inverse of the maximum virtual
address space size).
Note that this feature widens VBAR_ELx, but we already
treat the register as being 64 bits wide.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The original A.a revision of the AArch64 ARM required that we
force-extend the addresses in these registers from 49 bits.
This language has been loosened via a combination of IMPLEMENTATION
DEFINED and CONSTRAINTED UNPREDICTABLE to allow consideration of
the entire aligned address.
This means that we do not have to consider whether or not FEAT_LVA
is enabled, and decide from which bit an address might need to be
extended.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This field controls the output (intermediate) physical address size
of the translation process. V8 requires to raise an AddressSize
fault if the page tables are programmed incorrectly, such that any
intermediate descriptor address, or the final translated address,
is out of range.
Add a PS field to ARMVAParameters, and properly compute outputsize
in get_phys_addr_lpae. Test the descaddr as extracted from TTBR
and from page table entries.
Restrict descaddrmask so that we won't raise the fault for v7.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The macro is a bit more readable than the inlined computation.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pass down the width of the output address from translation.
For now this is still just PAMax, but a subsequent patch will
compute the correct value from TCR_ELx.{I}PS.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We will shortly share parts of this function with other portions
of address translation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Without FEAT_LVA, the behaviour of programming an invalid value
is IMPLEMENTATION DEFINED. With FEAT_LVA, programming an invalid
minimum value requires a Translation fault.
It is most self-consistent to choose to generate the fault always.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set this as the kernel would, to 48 bits, to keep the computation
of the address space correct for PAuth.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add new macros to manipulate signed fields within the register.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220301215958.157011-2-richard.henderson@linaro.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
handle_simd_shift_fpint_conv() was accidentally freeing the TCG
temporary tcg_fpstatus too early, before the last use of it. Move
the free down to where it belongs.
Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[PMM: cleaned up commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support the latest PSCI on TCG and HVF. A 64-bit function called from
AArch32 now returns NOT_SUPPORTED, which is necessary to adhere to SMC
Calling Convention 1.0. It is still not compliant with SMCCC 1.3 since
they do not implement mandatory functions.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220213035753.34577-1-akihiko.odaki@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: update MISMATCH_CHECK checks on PSCI_VERSION macros to match]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previously this device created N subdevices which each owned an i2c bus.
Now this device simply owns the N i2c busses directly.
Tested: Verified devices behind mux are still accessible via qmp and i2c
from within an arm32 SoC.
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Patrick Venture <venture@google.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220202164533.1283668-1-venture@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The tsc210x doesn't support anything other than 16-bit reads on the
SPI bus, but the guest can program the SPI controller to attempt
them anyway. If this happens, don't abort QEMU, just log this as
a guest error.
This fixes our machine_arm_n8x0.py:N8x0Machine.test_n800
acceptance test, which hits this assertion.
The reason we hit the assertion is because the guest kernel thinks
there is a TSC2005 on this SPI bus address, not a TSC210x. (The n810
*does* have a TSC2005 at this address.) The TSC2005 supports the
24-bit accesses which the guest driver makes, and the TSC210x does
not (that is, our TSC210x emulation is not missing support for a word
width the hardware can handle). It's not clear whether the problem
here is that the guest kernel incorrectly thinks the n800 has the
same device at this SPI bus address as the n810, or that QEMU's n810
board model doesn't get the SPI devices right. At this late date
there no longer appears to be any reliable information on the web
about the hardware behaviour, but I am inclined to think this is a
guest kernel bug. In any case, we prefer not to abort QEMU for
guest-triggerable conditions, so logging the error is the right thing
to do.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/736
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20220221140750.514557-1-peter.maydell@linaro.org
The AN547 application note URL has changed: update our comment
accordingly. (Rev B is still downloadable from the old URL,
but there is a new Rev C of the document now.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220221094144.426191-1-peter.maydell@linaro.org
With these interfaces missing, TFM would delegate peripherals 0, 1,
2, 3 and 8, and qemu would ignore the delegation of interface 8, as
it thought interface 4 was eth & USB.
This patch corrects this behavior and allows TFM to delegate the
eth & USB peripheral to NS mode.
(The old QEMU behaviour was based on revision B of the AN547
appnote; revision C corrects this error in the documentation,
and this commit brings QEMU in to line with how the FPGA
image really behaves.)
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Message-id: 20220210210227.3203883-1-jimmy.brisson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: added commit message note clarifying that the old behaviour
was a docs issue, not because there were two different versions
of the FPGA image]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are no longer any VMStateDescription structs in the tree which
use the load_state_old support for custom handling of incoming
migration from very old QEMU. Remove the mechanism entirely.
This includes removing one stray useless setting of
minimum_version_id_old in a VMStateDescription with no load_state_old
function, which crept in after the global weeding-out of them in
commit 17e3134061.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220215175705.3846411-1-peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
test_migrate_start() will release the MigrateStart structure that passed
in, however that's not super clear to the caller because after the call
returned the pointer can still be referenced by the callers. It can easily
be a source of use-after-free.
Let's pass in a double pointer of that, then we can safely clear the
pointer for the caller after the struct is released.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-26-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
dgilbert: Fixup apply since I didn't take 24/25
Add a helper to cleanup the transport listener.
When do it, we should also null-ify the cleanup hook and the data, then it's
even safe to call it multiple times.
Move the socket_address_list cleanup altogether, because that's a mirror of the
listener channels and only for the purpose of query-migrate. Hence when
someone wants to cleanup the listener transport, it should also want to cleanup
the socket list too, always.
No functional change intended.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-15-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Per the title, remove the return code and simplify the callers as the errors
will never be triggered. No functional change intended.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-12-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We used to have quite a few places making sure -EIO happened and that's the
only way to trigger postcopy recovery. That's based on the assumption that
we'll only return -EIO for channel issues.
It'll work in 99.99% cases but logically that won't cover some corner cases.
One example is e.g. ram_block_from_stream() could fail with an interrupted
network, then -EINVAL will be returned instead of -EIO.
I remembered Dave Gilbert pointed that out before, but somehow this is
overlooked. Neither did I encounter anything outside the -EIO error.
However we'd better touch that up before it triggers a rare VM data loss during
live migrating.
To cover as much those cases as possible, remove the -EIO restriction on
triggering the postcopy recovery, because even if it's not a channel failure,
we can't do anything better than halting QEMU anyway - the corpse of the
process may even be used by a good hand to dig out useful memory regions, or
the admin could simply kill the process later on.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-11-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Static variable is very unfriendly to threading of ram_block_from_stream().
Move it into MigrationIncomingState.
Make the incoming state pointer to be passed over to ram_block_from_stream() on
both caller sites.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20220301083925.33483-8-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Naveen Nagar