The 'wait'/'nowait' parameter is used to tell server sockets whether to
block until a client is accepted during initialization. Client chardevs
have always silently ignored this option. Various tests were mistakenly
passing this option for their client chardevs.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190211182442.8542-6-berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Run qtest with a socket that connects QEMU chardev and test code.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190123120759.7162-2-jusual@mail.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Adds a new qtest command "set_irq_in" which allows
to set qemu gpio lines to a given level.
Based on https://lists.gnu.org/archive/html/qemu-devel/2012-12/msg02363.html
which never got merged.
Signed-off-by: Steffen Görtz <contrib@steffen-goertz.de>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20190103091119.9367-2-stefanha@redhat.com
Originally-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There's no point in waiting 5 full minutes when there will be
no more output. Compute timeout based on elapsed wall clock
time instead of N * delays, as the delay is a minimum sleep time.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
[thuth: Replaced global_qtest with local qts variable]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit ddee57e017.
Meanwhile, revert one line from fa198ad9bd to make sure
qtest_init_without_qmp_handshake() will only pass in one parameter.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-5-peterx@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Out-of-band command execution was introduced in commit cf869d5317.
Unfortunately, we ran into a regression, and had to turn it into an
experimental option for 2.12 (commit be933ffc23).
http://lists.gnu.org/archive/html/qemu-devel/2018-03/msg06231.html
The regression has since been fixed (commit 951702f39c "monitor: bind
dispatch bh to iohandler context"). A thorough re-review of OOB
commands led to a few more issues, which have also been addressed.
This patch partly reverts be933ffc23 (monitor: new parameter "x-oob"),
and makes QMP monitors again offer capability "oob" whenever they can
provide it, i.e. when the monitor's character device is capable of
running in an I/O thread.
Some trivial touch-up in the test code is required to make sure qmp-test
won't break.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20181009062718.1914-4-peterx@redhat.com>
[Conflict with "monitor: check if chardev can switch gcontext for OOB"
resolved, commit message updated]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Record the command line that was used to start QEMU. This can be
useful for debugging.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
[thuth: removed trailing \n from the message string]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Macro g_assert_no_errno() intrudes into GLib's namespace. It's also
pretty pointless. Inline.
At one call site, its redundancy is now obvious. Delete it there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180926122933.3858-1-armbru@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This helper will simplify a bunch of code checking for QMP errors and
can be shared by various tests. Note that test-qga does check for
error description as well, so don't replace the code there for now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The JSON parser has three public headers, json-lexer.h, json-parser.h,
json-streamer.h. They all contain stuff that is of no interest
outside qobject/json-*.c.
Collect the public interface in include/qapi/qmp/json-parser.h, and
everything else in qobject/json-parser-int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-54-armbru@redhat.com>
The callback to consume JSON values takes QObject *json, Error *err.
If both are null, the callback is supposed to make up an error by
itself. This sucks.
qjson.c's consume_json() neglects to do so, which makes
qobject_from_json() null instead of failing. I consider that a bug.
The culprit is json_message_process_token(): it passes two null
pointers when it runs into a lexical error or a limit violation. Fix
it to pass a proper Error object then. Update the callbacks:
* monitor.c's handle_qmp_command(): the code to make up an error is
now dead, drop it.
* qga/main.c's process_event(): lumps the "both null" case together
with the "not a JSON object" case. The former is now gone. The
error message "Invalid JSON syntax" is misleading for the latter.
Improve it to "Input must be a JSON object".
* qobject/qjson.c's consume_json(): no update; check-qjson
demonstrates qobject_from_json() now sets an error on lexical
errors, but still doesn't on some other errors.
* tests/libqtest.c's qmp_response(): the Error object is now reliable,
so use it to improve the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-40-armbru@redhat.com>
The classical way to structure parser and lexer is to have the client
call the parser to get an abstract syntax tree, the parser call the
lexer to get the next token, and the lexer call some function to get
input characters.
Another way to structure them would be to have the client feed
characters to the lexer, the lexer feed tokens to the parser, and the
parser feed abstract syntax trees to some callback provided by the
client. This way is more easily integrated into an event loop that
dispatches input characters as they arrive.
Our JSON parser is kind of between the two. The lexer feeds tokens to
a "streamer" instead of a real parser. The streamer accumulates
tokens until it got the sequence of tokens that comprise a single JSON
value (it counts curly braces and square brackets to decide). It
feeds those token sequences to a callback provided by the client. The
callback passes each token sequence to the parser, and gets back an
abstract syntax tree.
I figure it was done that way to make a straightforward recursive
descent parser possible. "Get next token" becomes "pop the first
token off the token sequence". Drawback: we need to store a complete
token sequence. Each token eats 13 + input characters + malloc
overhead bytes.
Observations:
1. This is not the only way to use recursive descent. If we replaced
"get next token" by a coroutine yield, we could do without a
streamer.
2. The lexer reports errors by passing a JSON_ERROR token to the
streamer. This communicates the offending input characters and
their location, but no more.
3. The streamer reports errors by passing a null token sequence to the
callback. The (already poor) lexical error information is thrown
away.
4. Having the callback receive a token sequence duplicates the code to
convert token sequence to abstract syntax tree in every callback.
5. Known bug: the streamer silently drops incomplete token sequences.
This commit rectifies 4. by lifting the call of the parser from the
callbacks into the streamer. Later commits will address 3. and 5.
The lifting removes a bug from qjson.c's parse_json(): it passed a
pointer to a non-null Error * in certain cases, as demonstrated by
check-qjson.c.
json_parser_parse() is now unused. It's a stupid wrapper around
json_parser_parse_err(). Drop it, and rename json_parser_parse_err()
to json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-35-armbru@redhat.com>
To permit recovering from arbitrary JSON parse errors, the JSON parser
resets itself on lexical errors. We recommend sending a 0xff byte for
that purpose, and test-qga covers this usage since commit 5229564b83.
That commit had to add an ugly hack to qmp_fd_vsend() to make capable
of sending this byte (it's designed to send only valid JSON).
The previous commit added a way to send arbitrary text. Put that to
use for this purpose, and drop the hack from qmp_fd_vsend().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-8-armbru@redhat.com>
qmp-test neglects to cover QMP input that isn't valid JSON. libqtest
doesn't let us send such input. Add qtest_qmp_send_raw() for this
purpose, and put it to use in qmp-test.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-7-armbru@redhat.com>
[Commit message typo fixed]
The tests that check something for all machine types currently spend
a lot of time checking old machine types (like "pc-i440fx-2.0" for
example). The chances that we find something new there in addition
to checking the latest version of a machine type are pretty low, so
we should not waste the time of the developers by testing this again
and again in the "quick" testing mode.
Thus let's add some code to determine whether we are testing a current
machine type or an old one, and only test the old types if we are
running in "SPEED=slow" mode.
This decreases the testing time quite a bit now, e.g. the qom-test
now finishes within 4 seconds for qemu-system-x86_64 instead of 30
seconds when testing all machines.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1534419358-10932-6-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When read() from the qtest socket or the QMP socket fails or EOFs, we
report "Broken pipe" and exit(1). This commonly happens when QEMU
crashes. It also happens when QEMU refuses to run because the test
passed it bad arguments. Sadly, we neglect to report either.
Improve this by calling abort() instead of exit(1), so kill_qemu()
runs, and reports how QEMU died. This improves error reporting to
something like
/x86_64/device/introspect/list: Broken pipe
tests/libqtest.c:129: kill_qemu() detected QEMU death from signal 6 (Aborted) (dumped core)
Three exit() remain in libqtest.c:
* In qmp_response(), when we can't parse a QMP reply read from the QMP
socket. Change to abort() for consistency.
* In qtest_qemu_binary(), when QTEST_QEMU_BINARY isn't in the
environment. This can only happen before we start QEMU. Leave
alone.
* In qtest_init_without_qmp_handshake(), when the fork()ed child fails
to execlp(). Leave alone.
exit() elsewhere are unlikely due to QEMU dying on us. If that should
turn out to be wrong, we can move kill_qemu() from @abrt_hooks to
atexit() or something.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180815141945.10457-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[Commit message tweaked slightly]
In kill_qemu() we have an assert that checks that the QEMU process
didn't dump core:
assert(!WCOREDUMP(wstatus));
Unfortunately the WCOREDUMP macro here means the resulting message
is not very easy to comprehend on at least some systems:
ahci-test: tests/libqtest.c:113: kill_qemu: Assertion `!(((__extension__ (((union { __typeof(wstatus) __in; int __i; }) { .__in = (wstatus) }).__i))) & 0x80)' failed.
and it doesn't identify what signal the process took. What's more,
WCOREDUMP is not reliable - in some cases, setrlimit() coupled with
kernel dump settings can result in the flag not being set. It's
better to log ALL death by signal, instead of caring whether a core
dump was attempted (although once we know a signal happened, also
mentioning if a core dump is present can be helpful).
Furthermore, we are NOT detecting EINTR (while EINTR shouldn't be
happening if we didn't install signal handlers, it's still better
to always be robust).
Finally, even non-signal death with a non-zero status is suspicious,
since qemu's SIGINT handler is supposed to result in exit(0).
Instead of using a raw assert, print the information in an
easier to understand way:
/i386/ahci/sanity: tests/libqtest.c:129: kill_qemu() detected QEMU death from signal 11 (Segmentation fault) (core dumped)
(Of course, the really useful information would be why the QEMU
process dumped core in the first place, but we don't have that
by the time the test program has picked up the exit status.)
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180810132800.38549-1-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Core dump reporting and commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
13 of 13 C99 library function pairs taking ... or a va_list parameter
are called FOO() and vFOO(). In QEMU, we sometimes call the one
taking a va_list FOOv() instead. Bad taste. libqtest.h uses both
spellings. Normalize it to the standard spelling.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-24-armbru@redhat.com>
qtest_init() creates a new QTestState, and leaves @global_qtest alone.
qtest_start() additionally assigns it to @global_qtest, but
qtest_startf() additionally assigns NULL to @global_qtest. This makes
no sense. Replace it by qtest_initf() that works like qtest_init(),
i.e. leaves @global_qtest alone.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-23-armbru@redhat.com>
Commit b21373d071 copied wait_command() from tests/migration-test.c
to tests/tpm-util.c. Replace both copies by new libqtest helper
qtest_qmp_receive_success(). Also use it to simplify
qtest_qmp_device_del().
Bonus: gets rid of a non-literal format string. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Cc: Thomas Huth <thuth@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-17-armbru@redhat.com>
Leaving interpolation into JSON to qmp() is more robust than building
QMP input manually, as explained in the commit before previous.
qtest_qmp_device_add() and its wrappers interpolate into JSON as
follows:
* qtest_qmp_device_add() interpolates members into a JSON object.
* So do its wrappers qpci_plug_device_test() and usb_test_hotplug().
* usb_test_hotplug() additionally interpolates strings and numbers
into JSON strings.
Clean them up:
* Have qtest_qmp_device_add() take its extra device properties as
arguments for qdict_from_jsonf_nofail() instead of a string
containing JSON members.
* Drop qpci_plug_device_test(), use qtest_qmp_device_add()
directly.
* Change usb_test_hotplug() parameter @port to string, to avoid
interpolation. Interpolate @hcd_id separately.
Bonus: gets rid of a non-literal format string. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Cc: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-15-armbru@redhat.com>
When you build QMP input manually like this
cmd = g_strdup_printf("{ 'execute': 'migrate',"
"'arguments': { 'uri': '%s' } }",
uri);
rsp = qmp(cmd);
g_free(cmd);
you're responsible for escaping the interpolated values for JSON. Not
done here, and therefore works only for sufficiently nice @uri. For
instance, if @uri contained a single "'", qobject_from_vjsonf_nofail()
would abort. A sufficiently nasty @uri could even inject unwanted
members into the arguments object.
Leaving interpolation into JSON to qmp() is more robust:
rsp = qmp("{ 'execute': 'migrate', 'arguments': { 'uri': %s } }", uri);
It's also more concise.
Clean up the simple cases where we interpolate exactly a JSON value.
Bonus: gets rid of non-literal format strings. A step towards
compile-time format string checking without triggering
-Wformat-nonliteral.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-13-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-9-armbru@redhat.com>
qtest_qmp_discard_response(...) is shorthand for
qobject_unref(qtest_qmp(...), except it's not actually shorter.
Moreover, the presence of these functions encourage sloppy testing.
Remove them from libqtest. Add them as macros to the tests that use
them, with a TODO comment asking for cleanup.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-5-armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
qtest_init() still uses the qtest_qmp_discard_response(s, "") hack to
receive the greeting, even though we have qtest_qmp_receive() since
commit 66e0c7b187. Put it to use.
Bonus: gets rid of an empty format string. A step towards
compile-time format string checking without triggering
-Wformat-zero-length.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-4-armbru@redhat.com>
qtest_qmp_device_del() still uses the qmp("") hack to receive a
message, even though we have qmp_receive() since commit 66e0c7b187.
Put it to use.
Bonus: gets rid of empty format strings. A step towards compile-time
format string checking without triggering -Wformat-zero-length.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-3-armbru@redhat.com>
The functions to receive messages are called qtest_qmp_receive() and
qmp_receive(), qmp_fd_receive(). The ones to send messages are called
qtest_async_qmp(), qtest_async_qmpv(), qmp_async(), qmp_fd_send(),
qmp_fd_sendv(). Inconsistent. Rename the *_async* ones to
qmp_send(), qtest_qmp_send(), qtest_qmp_vsend(). Rename
qmp_fd_sendv() to qmp_fd_vsend().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180806065344.7103-2-armbru@redhat.com>
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbEXNvAAoJECgfDbjSjVRpc8gH/R8xrcFrV+k9wwbgYcOcGb6Y
LWjseE31pqJcxRV80vLOdzYEuLStZQKQQY7xBDMlA5vdyvZxIA6FLO2IsiJSbFAk
EK8pclwhpwQAahr8BfzenabohBv2UO7zu5+dqSvuJCiMWF3jGtPAIMxInfjXaOZY
odc1zY2D2EgsC7wZZ1hfraRbISBOiRaez9BoGDKPOyBY9G1ASEgxJgleFgoBLfsK
a1XU+fDM6hAVdxftfkTm0nibyf7PWPDyzqghLqjR9WXLvZP3Cqud4p8N29mY51pR
KSTjA4FYk6Z9EVMltyBHfdJs6RQzglKjxcNGdlrvacDfyFi79fGdiosVllrjfJM=
=3+V0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi, vhost, misc: fixes, features
vDPA support, fix to vhost blk RO bit handling, some include path
cleanups, NFIT ACPI table.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 01 Jun 2018 17:25:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
vhost-blk: turn on pre-defined RO feature bit
ACPI testing: test NFIT platform capabilities
nvdimm, acpi: support NFIT platform capabilities
tests/.gitignore: add entry for generated file
arch_init: sort architectures
ui: use local path for local headers
qga: use local path for local headers
colo: use local path for local headers
migration: use local path for local headers
usb: use local path for local headers
sd: fix up include
vhost-scsi: drop an unused include
ppc: use local path for local headers
rocker: drop an unused include
e1000e: use local path for local headers
ioapic: fix up includes
ide: use local path for local headers
display: use local path for local headers
trace: use local path for local headers
migration: drop an unused include
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* start QEMU with 2 unmapped cpus,
* while in preconfig state
* add 2 numa nodes
* assign cpus to them
* exit preconfig and in running state check that cpus
are mapped correctly.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1526556607-268163-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Right now tests report OK status if QEMU crashes during cleanup.
Let's catch that case and fail the test.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Now that we can safely call QOBJECT() on QObject * as well as its
subtypes, we can have macros qobject_ref() / qobject_unref() that work
everywhere instead of having to use QINCREF() / QDECREF() for QObject
and qobject_incref() / qobject_decref() for its subtypes.
The replacement is mechanical, except I broke a long line, and added a
cast in monitor_qmp_cleanup_req_queue_locked(). Unlike
qobject_decref(), qobject_unref() doesn't accept void *.
Note that the new macros evaluate their argument exactly once, thus no
need to shout them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180419150145.24795-4-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased, semantic conflict resolved, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Allow callers to choose whether to allow OOB support during a test;
for now, all existing callers pass false, but the next patch will
add a new caller. Also, rewrite the monitor setup to be generic
(using the -qmp shorthand is insufficient for honoring the parameter).
Based on an idea by Peter Xu, in <20180326063901.27425-8-peterx@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180327013620.1644387-4-eblake@redhat.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This patch was generated using the following Coccinelle script:
@@
expression Obj;
@@
(
- qobject_to_qnum(Obj)
+ qobject_to(QNum, Obj)
|
- qobject_to_qstring(Obj)
+ qobject_to(QString, Obj)
|
- qobject_to_qdict(Obj)
+ qobject_to(QDict, Obj)
|
- qobject_to_qlist(Obj)
+ qobject_to(QList, Obj)
|
- qobject_to_qbool(Obj)
+ qobject_to(QBool, Obj)
)
and a bit of manual fix-up for overly long lines and three places in
tests/check-qjson.c that Coccinelle did not find.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20180224154033.29559-4-mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[eblake: swap order from qobject_to(o, X), rebase to master, also a fix
to latent false-positive compiler complaint about hw/i386/acpi-build.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
This will keep checkpatch happy when the next patch does code motion.
Fix the include order to match HACKING when adding the needed header.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-14-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qdict.h
drop from 4550 (out of 4743) to 368 in my "build everything" tree.
For qapi/qmp/qobject.h, the number drops from 4552 to 390.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-13-armbru@redhat.com>
This cleanup makes the number of objects depending on qapi/qmp/qlist.h
drop from 4551 (out of 4743) to 16 in my "build everything" tree.
While there, separate #include from file comment with a blank line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-12-armbru@redhat.com>
We have several callers that were formatting the argument strings
themselves; consolidate this effort by adding new convenience
functions directly in libqtest, and update some call-sites that
can benefit from it.
Note that the new functions qtest_startf() and qtest_vstartf()
behave more like qtest_init() (the caller must assign global_qtest
after the fact, rather than getting it implicitly set). This helps
us prepare for future patches that get rid of the global variable,
by explicitly highlighting which tests still depend on it now.
Signed-off-by: Eric Blake <eblake@redhat.com>
[thuth: Dropped the hunks that do not apply cleanly to qemu master
yet and added the missing g_free(args) in qtest_vstartf()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1508336428-20511-2-git-send-email-thuth@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
[PMD: split of some files in other commits of the same series, add libqtest.c]
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Prior to commit 063c23d9, we were tracking a list of parallel
qtest objects, in order to safely clean up a SIGABRT handler
only after the last connection quits. But when we switched to
more of glib's infrastructure, the list became dead code that
is never assigned to.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The user can currently still cause an abort() if running certain tests
(like the prom-env-test) without setting the QTEST_QEMU_BINARY first.
A similar problem has been fixed with commit 7c933ad61b
already, but forgot to also take care of the qtest_get_arch() function,
so let's introduce a proper wrapper around getenv("QTEST_QEMU_BINARY")
that can be used in both locations now.
Buglink: https://bugs.launchpad.net/qemu/+bug/1713434
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
A lot of tests provide code for adding and removing a device via the
device_add and device_del QMP commands. Maintaining this code in so many
places is cumbersome and error-prone (some of the code parts check the
responses for device deletion in an incorrect way, for example, we've got
to deal with both, error code and DEVICE_DEL event here). So let's provide
some proper generic functions for adding and removing a device instead.
The code for correctly unplugging a device has been taken from a patch
from Peter Xu.
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently abort handlers only work for the first test function
in a testcase, because the list of abort handlers is not properly
cleared when qtest_quit() is called.
qtest_quit() only deletes the kill_qemu_hook but doesn't completely
clear the abrt_hooks list. The effect is that abrt_hooks.is_setup is
never set to false and in a following test the abrt_hooks list is not
initialized and setup_sigabrt_handler() is not called.
One way to solve this is to clear the list in qtest_quit(), but
that means only asserts between qtest_start and qtest_quit will
be catched by the abort handler.
We can make abort handlers work in all cases if we always setup the
signal handler for SIGABRT in qtest_init.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When you currently try to run a test directly from the command line
without setting the QTEST_QEMU_BINARY environment variable first,
you are presented with an unhelpful assertion message like this:
ERROR:tests/libqtest.c:163:qtest_init_without_qmp_handshake:
assertion failed: (qemu_binary != NULL)
Aborted (core dumped)
Let's replace the assert() with a more user friendly error message
instead.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 62c39b3 introduced test-qga, and at face value, appears
to be testing the 'guest-sync' behavior that is recommended for
guests in sending 0xff to QGA to force the parser to reset. But
this aspect of the test has never actually done anything: the
qmp_fd() call chain converts its string argument into QObject,
then converts that QObject back to the actual string that is
sent over the wire - and the conversion process silently drops
the 0xff byte from the string sent to QGA, thus never resetting
the QGA parser.
An upcoming patch will get rid of the wasteful round trip
through QObject, at which point the string in test-qga will be
directly sent over the wire.
But fixing qmp_fd() to actually send 0xff over the wire is not
all we have to do - the actual QMP parser loudly complains that
0xff is not valid JSON, and sends an error message _prior_ to
actually parsing the 'guest-sync' or 'guest-sync-delimited'
command. With 'guest-sync', we cannot easily tell if this error
message is a result of our command - which is WHY we invented
the 'guest-sync-delimited' command. So for the testsuite, fix
things to only check 0xff behavior on 'guest-sync-delimited',
and to loop until we've consumed all garbage prior to the
requested delimiter, which is compatible with the documented actions
that a real QGA client is supposed to do.
Ideally, we'd fix the QGA JSON parser to silently ignore 0xff
rather than sending an error message back, at which point we
could enhance this test for 'guest-sync' as well as for
'guest-sync-delimited'. But for the sake of this patch, our
testing of 'guest-sync' is no worse than it was pre-patch,
because we have never been sending 0xff over the wire in the
first place.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-11-eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[Additional comment squashed in, along with matching commit message
update]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Some tests need to run single tests for every available machine of the
current QEMU binary. To avoid code duplication, let's extract this
code that deals with 'query-machines' into a separate function.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1490860207-8302-3-git-send-email-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
When running certain HMP commands (like "device_del") via QMP, we
can sometimes get a QMP event in the response first, so that the
"g_assert(ret)" statement in qtest_hmp() triggers and the test
fails. Fix this by ignoring such QMP events while looking for the
real return value from QMP.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1490860207-8302-2-git-send-email-thuth@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Added note to qtest_hmp/qtest_hmpv's header description to say
it discards events
Occasionally if a test crashes or is interrupted by the user
at the wrong moment it could leave behind a stale UNIX
socket in /tmp/. This will then cause a subsequent test
run to fail spuriously with
tests/libqtest.c:70:init_socket: assertion failed (ret != -1): (-1 != -1)
if it happens to reuse the same PID.
Defend against this by deleting any stray stale socket before
trying to open the new ones for this test.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1490963801-27870-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-10-git-send-email-armbru@redhat.com>
The next few commits will put the errors to use where appropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-9-git-send-email-armbru@redhat.com>
Daniel P. Berrangé