Commit fba72476c6 ("ich9: add smm_enabled field and arguments") detached
SMM availability from kvm_enabled(). However, the comment in pm_reset()
was not updated; let's do it now.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Otherwise on reboot firmware might think (due to APMC_EN remaining set
from the previous boot) that SMI support is absent.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
By declaring another .subsections array for vmstate_tco_io_state made
vmstate_memhp_state not registered anymore. There must be only one
.subsections array for all subsections.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
If the signal is sampled high, this indicates that the system is
strapped to the "No Reboot" mode (ICH9 will disable the TCO Timer system
reboot feature). The status of this strap is readable via the NO_REBOOT
bit (CC: offset 0x3410:bit 5).
The NO_REBOOT bit is set when SPKR pin on ICH9 is sampled high. This bit
may be set or cleared by software if the strap is sampled low but may
not override the strap when it indicates "No Reboot".
This patch implements the logic where hardware has ability to set SPKR
pin through a property named "noreboot" and it's sampled high by
default.
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This interface provides some registers within a 32-byte range and can be
acessed through PCI-to-LPC bridge interface (PMBASE + 0x60).
It's commonly used as a watchdog timer to detect system lockups through
SMIs that are generated -- if TCO_EN bit is set -- on every timeout. If
NO_REBOOT bit is not set in GCS (General Control and Status register),
the system will be resetted upon second timeout if TCO_RLD register
wasn't previously written to prevent timeout.
This patch adds support to TCO watchdog logic and few other features
like mapping NMIs to SMIs (NMI2SMI_EN bit), system intruder detection,
etc. are not implemented yet.
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MIPS doesn't need it, and including it creates problem as we are adding
dependency on ISA LPC bridge.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Q35's ACPI device is hard-coding SMM availability to KVM. Place the
logic where the board is created instead, so that it will be possible
to override it.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We will enable SMM even if KVM is in use. Rename the field and
arguments.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These commands are handled entirely by QEMU. Do not raise an SMI
when they happen, because Windows (at least 2008r2) expects these
commands to work and (depending on the value of APMC_EN at
startup) the firmware might not have installed an SMI handler.
When this happens (e.g. the kernel supports SMIs, or you are using
TCG, but you have used "-machine smm=off") RIP is moved to 0x38000
where there is no code to execute.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Accessing QEMU_CLOCK_VIRTUAL is thread-safe.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1434646046-27150-9-git-send-email-pbonzini@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add write mask for the smi enable register, so we can disable write
access to certain bits. Open all bits on reset. Disable write access
to GBL_SMI_EN when SMI_LOCK (in ich9 lpc pci config space) is set.
Write access to SMI_LOCK itself is disabled too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This PIIX4 init function has no more reason to receive a pointer to the
FwCfg object. Remove the parameter from the prototype, and update callers.
As a result, the pc_init1() function no longer needs to save the return
value of pc_memory_init() and xen_load_linux(), which makes it more
similar to pc_q35_init().
The return type & value of pc_memory_init() and xen_load_linux() are not
changed themselves; maybe we'll need their return values sometime later.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
The acpi_pm1_cnt_init() core function is responsible for setting up the
register block that will ultimately react to S3 and S4 requests (see
acpi_pm1_cnt_write()). It makes sense to advertise this configuration to
the guest firmware via an easy to parse fw_cfg file (ACPI is too complex
for firmware to parse), and indeed PIIX4 does that. However, since
acpi_pm1_cnt_init() is not specific to PIIX4, neither should be the fw_cfg
file.
This patch makes "etc/system-states" appear on all chipsets modified in
the previous patch, not just PIIX4 (assuming they have fw_cfg at all).
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
This patch only modifies the function prototype and updates all chipset
code that calls acpi_pm1_cnt_init() to pass in their own disable_s3 and
disable_s4 settings. vt82c686 is assumed to be fixed "S3 and S4 enabled".
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Commit 68e6b0af7 (acpi: add aml_while() term) added
the definition of aml_while without the actual implementation.
Implement the term.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Add a new API named acpi_send_gpe_event() to send hotplug SCI.
This API can be used by pci, cpu and memory hotplug.
This patch is rebased on master.
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Add encoding for ACPI DefIncrement Opcode.
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add encoding for ACPI DefShiftRight Opcode.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Add encoding for ACPI DefShiftLeft Opcode.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Add encoding for ACPI DefIndex Opcode.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Add encoding for ACPI DefLLess Opcode.
Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add encoding for ACPI DefAdd Opcode.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
build_append_namestringv() and aml_string() first calculate the
resulting string's length with vsnprintf(NULL, ...), then allocate,
then print for real. Simply use g_strdup_vprintf() or g_vasprintf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
As core.c, piix4.c, ich9.c and pcihp.c are for x86, add CONFIG_ACPI_X86
to make it only for x86. ARM doesn't support cpu and memory hotplug, add
CONFIG_ACPI_CPU_HOTPLUG and CONFIG_ACPI_MEMORY_HOTPLUG to exclude them
for target-arm.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-24-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add ToUUID macro, this is useful for generating PCIe ACPI table.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-16-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
According to ACPI spec, DefBuffer can take two parameters: BufferSize
and ByteList. Make it consistent with the spec. Uninitialized buffer
could be requested by passing ByteList as NULL to reserve space.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-15-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
RSDT points to other tables FADT, MADT, GTDT. This code is shared with x86.
Here we still use RSDT as UEFI puts ACPI tables below 4G address space,
and UEFI ignore the RSDT or XSDT.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-12-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add aml_interrupt() for describing device interrupt in resource template.
These can be used to generating DSDT table for ACPI on ARM.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1432522520-8068-7-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add aml_memory32_fixed() for describing device mmio region in resource
template. These can be used to generating DSDT table for ACPI on ARM.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1432522520-8068-6-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVUFj/AAoJECgfDbjSjVRpteQH+gKoOMKilM6qvgdQS9vduFJ+
lDHNnmfgzWjVMEetiUOc9hImfEEyTyDFrkSI3wf4a8RZ7UnnDKD8hZR1nToySJPd
SuDP/EdtXYtInIMjc1MUUrJEP6qtjjgM+IbikVzHDxCeekrTMFz2w05MZ+V+hxI5
8b8ndPNfjX3ciIRjHKZ2u6hKEemhzxr1yyKTnJVGDN07hmfMbCyLsiWnFfShZwfv
g7USgiXjFfpvU5Q7QWpiCapfAaEpevRqieGzRjSbPy5Frm3XT7v+hWbFnvIJqUPj
5/SMV8I4qtKQe15Qah292HB//oaFM/AvRtHWvQkre3YIqFwyCYimQtjqoRCYC1E=
=x0ub
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc, virtio enhancements
Memory hot-unplug support for pc, MSI-X
mapping update speedup for virtio-pci,
misc refactorings and bugfixes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon May 11 08:23:43 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (28 commits)
acpi: update expected files for memory unplug
virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi
virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net
pci: Merge pci_nic_init() into pci_nic_init_nofail()
acpi: add a missing backslash to the \_SB scope.
qmp-event: add event notification for memory hot unplug error
acpi: add hardware implementation for memory hot unplug
acpi: fix "Memory device control fields" register
acpi: extend aml_field() to support UpdateRule
acpi, mem-hotplug: add unplug cb for memory device
acpi, mem-hotplug: add unplug request cb for memory device
acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus
docs: update documentation for memory hot unplug
virtio: coding style tweak
pci: remove hard-coded bar size in msix_init_exclusive_bar()
virtio-pci: speedup MSI-X masking and unmasking
virtio: introduce vector to virtqueues mapping
virtio-ccw: using VIRTIO_NO_VECTOR instead of 0 for invalid virtqueue
monitor: check return value of qemu_find_net_clients_except()
monitor: replace the magic number 255 with MAX_QUEUE_NUM
...
Conflicts:
hw/s390x/s390-virtio-bus.c
[PMM: fixed conflict in s390_virtio_scsi_properties and
s390_virtio_net_properties arrays; since the result of the
two conflicting patches is to empty the property arrays
completely, the conflict resolution is to remove them entirely.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit was generated mechanically by coccinelle from the following
semantic patch:
@@
expression val;
@@
- (ffs(val) - 1)
+ ctz32(val)
The call sites have been audited to ensure the ffs(0) - 1 == -1 case
never occurs (due to input validation, asserts, etc). Therefore we
don't need to worry about the fact that ctz32(0) == 32.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When memory hot unplug fails, this patch adds support to send
QMP event to notify mgmt about this failure.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- implements QEMU hardware part of memory hot unplug protocol
described at "docs/spec/acpi_mem_hotplug.txt"
- handles memory remove notification event
- handles device eject notification
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The flags field is declared with default update rule 'Preserve',
this patch extends aml_field() to support UpdateRule so that we
can specify different values per field.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds unplug cb for memory device. It resets memory status
"is_enabled" in acpi_memory_unplug_cb(), removes the corresponding
memory region, unregisters vmstate, and unparents the object.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds unplug request cb for memory device, and adds the
is_removing boolean field to MemStatus. This field is used to indicate
whether the memory device in slot has been requested to be ejected.
This field is set to true in acpi_memory_unplug_request_cb().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a new API named acpi_memory_slot_status() to obtain a single memory
slot status. Doing this is because this procedure will be used by other
functions in the next coming patches.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move generic acpi building helpers into dedictated file and this
can be shared with other machines.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This fixes these gcc warnings (not enabled in default build):
hw/acpi/aml-build.c:83:5: warning:
function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
hw/acpi/aml-build.c:88:5: warning:
function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Laszlo Ersek