The ‘enable’ parameter to the vhost_migration_log() function is given as
an int, but "true"/"false" values are passed in wherever it is invoked.
Inside the function itself it is only ever compared with bool values.
Therefore the parameter value itself should be changed to bool.
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <CAFubqFtqNZw=Y-ar3N=3zTQi6LkKg_G-7W7OOHHbE7Y1fV7HAQ@mail.gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Wire the dwc-hsotg (dwc2) emulation into Qemu
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Reviewed-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Message-id: 20200520235349.21215-7-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The dwc-hsotg (dwc2) USB host depends on a short packet to
indicate the end of an IN transfer. The usb-storage driver
currently doesn't provide this, so fix it.
I have tested this change rather extensively using a PC
emulation with xhci, ehci, and uhci controllers, and have
not observed any regressions.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-6-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the dwc-hsotg (dwc2) USB host controller emulation code.
Based on hw/usb/hcd-ehci.c and hw/usb/hcd-ohci.c.
Note that to use this with the dwc-otg driver in the Raspbian
kernel, you must pass the option "dwc_otg.fiq_fsm_enable=0" on
the kernel command line.
Emulation of slave mode and of descriptor-DMA mode has not been
implemented yet. These modes are seldom used.
I have used some on-line sources of information while developing
this emulation, including:
http://www.capital-micro.com/PDF/CME-M7_Family_User_Guide_EN.pdf
which has a pretty complete description of the controller starting
on page 370.
https://sourceforge.net/p/wive-ng/wive-ng-mt/ci/master/tree/docs/DataSheets/RT3050_5x_V2.0_081408_0902.pdf
which has a description of the controller registers starting on
page 130.
Thanks to Felippe Mathieu-Daude for providing a cleaner method
of implementing the memory regions for the controller registers.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-5-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the dwc-hsotg (dwc2) USB host controller state definitions.
Mostly based on hw/usb/hcd-ehci.h.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Message-id: 20200520235349.21215-4-pauldzim@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add BCM2835 SOC MPHI (Message-based Parallel Host Interface)
emulation. It is very basic, only providing the FIQ interrupt
needed to allow the dwc-otg USB host controller driver in the
Raspbian kernel to function.
Signed-off-by: Paul Zimmerman <pauldzim@gmail.com>
Acked-by: Philippe Mathieu-Daude <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200520235349.21215-2-pauldzim@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ADC region size is 256B, split as:
- [0x00 - 0x4f] defined
- [0x50 - 0xff] reserved
All registers are 32-bit (thus when the datasheet mentions the
last defined register is 0x4c, it means its address range is
0x4c .. 0x4f.
This model implementation is also 32-bit. Set MemoryRegionOps
'impl' fields.
See:
'RM0033 Reference manual Rev 8', Table 10.13.18 "ADC register map".
Reported-by: Seth Kintigh <skintigh@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200603055915.17678-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace printf() calls by qemu_log_mask(), which is disabled
by default. This avoid flooding the terminal when fuzzing the
device.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200525114123.21317-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw_error() calls exit(). This a bit overkill when we can log
the accesses as unimplemented or guest error.
When fuzzing the devices, we don't want the whole process to
exit. Replace some hw_error() calls by qemu_log_mask()
(missed in commit 5a0001ec7e).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200525114123.21317-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When inserting the value retrieved (rx) from the spi slave, rx is pushed to
rx_fifo after being cast to uint8_t. rx_fifo is a fifo32, and the rx
register the driver uses is also 32 bit. This zeroes the 24 most
significant bits of rx. This proved problematic with devices that expect to
use the whole 32 bits of the rx register.
Signed-off-by: Eden Mikitas <e.mikitas@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The while statement in question only checked if tx_burst is not 0.
tx_burst is a signed int, which is assigned the value put by the
guest driver in ECSPI_CONREG. The burst length can be anywhere
between 1 and 4096, and since tx_burst is always decremented by 8
it could possibly underflow, causing an infinite loop.
Signed-off-by: Eden Mikitas <e.mikitas@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove the explicit prefetch check when using vfio-ccw devices.
This check does not trigger in practice as all Linux channel programs
are intended to use prefetch.
Newer Linux kernel versions do not require to force the PFCH flag with
vfio-ccw devices anymore.
Signed-off-by: Jared Rossi <jrossi@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Message-Id: <20200512181535.18630-2-jrossi@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390_pv_perf_clear_reset() is not a very helpful name since that
function needs to be called for a normal and a clear reset via
diag308.
Let's instead name it s390_pv_prep_reset() which reflects the purpose
of the function a bit better.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200505124159.24099-1-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now than the non-target specific memory_region_msync() function
is available, use it to make this device target-agnostic.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-4-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
While replacing fprintf() by qemu_log_mask() in commit
2b55f4d350, we incorrectly used a 'tab = 4 spaces'
alignment, leading to misindented new code. Fix now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200529165436.23573-1-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While accessing VGA registers via ati_mm_read/write routines,
a guest may set 's->regs.mm_index' such that it leads to infinite
recursion. Check mm_index value to avoid such recursion. Log an
error message for wrong values.
Reported-by: Ren Ding <rding@gatech.edu>
Reported-by: Hanqing Zhao <hanqing@gatech.edu>
Reported-by: Yi Ren <c4tren@gmail.com>
Message-id: 20200604090830.33885-1-ppandit@redhat.com
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds a barebone OpenTitan machine to QEMU.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
The ISA specific Spike machines have been deprecated in QEMU since 4.1,
let's finally remove them.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Remove the riscv_ prefix of the machine* functions.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1590072147-13035-2-git-send-email-bmeng.cn@gmail.com
Message-Id: <1590072147-13035-2-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To keep consistency with the machine* functions, remove the riscv_
prefix of the soc* functions.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1590072147-13035-1-git-send-email-bmeng.cn@gmail.com
Message-Id: <1590072147-13035-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Per QEMU deprecated doc, QEMU 4.1 introduced support for the -bios
option in QEMU for RISC-V for the virt machine and sifive_u machine.
The default behavior has been that QEMU does not automatically load
any firmware if no -bios option is included.
Now 2 releases passed, it's time to change the default behavior to
load the default OpenSBI firmware automatically. The firmware is
included with the QEMU release and no user interaction is required.
All a user needs to do is specify the kernel they want to boot with
the -kernel option.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1588335545-649-1-git-send-email-bmeng.cn@gmail.com
Message-Id: <1588335545-649-1-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We only ship plain binary bios images in the QEMU source. With Spike
machine that uses ELF images as the default bios, running QEMU test
will complain hence let's suppress the error report for QEMU testing.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Message-Id: <1588348254-7241-6-git-send-email-bmeng.cn@gmail.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Loongson processor prefers 16KB page size in system emulator, so let's
define mc->minimum_page_bits to 14.
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1586337380-25217-2-git-send-email-chenhc@lemote.com>
Currently, KVM/MIPS only deliver I/O interrupt via IP2, this patch add
IP3 delivery as well, because Loongson-3 based machine use both IRQ2
(CPU's IP2) and IRQ3 (CPU's IP3).
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1588501221-1205-4-git-send-email-chenhc@lemote.com>
hw_error() calls exit(). This a bit overkill when we can log
the accesses as unimplemented or guest error.
When fuzzing the devices, we don't want the whole process to
exit. Replace some hw_error() calls by qemu_log_mask().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200526094052.1723-3-f4bug@amsat.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
All calls to m5206_mbar_read/m5206_mbar_write are used with
'offset = hwaddr & 0x3ff', so we are sure the offset fits
in 16-bit.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200526094052.1723-2-f4bug@amsat.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
AmigaOS tends to do a lot of small blits (even 1 pixel). Avoid malloc
overhead by keeping around a buffer for this and only alloc when
blitting larger areas.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 7946852258d528497e85f465327fc90b5c3b59fb.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Besides being faster this should also prevent malicious guests to
abuse 2D engine to overwrite data or cause a crash.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 58666389b6cae256e4e972a32c05cf8aa51bffc0.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make variables local to the block they are used in to make it clearer
which operation they are needed for.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: ae59f8138afe7f6a5a4a82539d0f61496a906b06.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some places already use qemu_log_mask() to log unimplemented features
or errors but some others have printf() then abort(). Convert these to
qemu_log_mask() and avoid aborting to prevent guests to easily cause
denial of service.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 305af87f59d81e92f2aaff09eb8a3603b8baa322.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace printf() calls by qemu_log_mask(UNIMP), which is
disabled by default. This avoid flooding the terminal when
fuzzing the device.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-15-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace fprintf() call by qemu_log_mask(LOG_UNIMP), which is
disabled by default. This avoid flooding the terminal when
fuzzing the device.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-14-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To avoid the orphan I/O memory region being added in the /unattached
QOM container, register the PCI device as its owner.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200526062252.19852-12-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Avoid flooding stdio by converting printf() calls to
qemu_log_mask(GUEST_ERROR), which are disabled by default.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-11-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
DPRINTF() calls are disabled by default, so when unexpected
data is used, the whole process abort without information.
Display a bit of information with error_report() before crashing.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-10-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Philippe Mathieu-Daudé