CONFIG_KVM is only defined for target-specific code, so nobody should
use it by accident in common code. To avoid such subtle bugs,
CONFIG_KVM is now marked as poisoned in common code. The header
include/sysemu/kvm.h is somewhat special since it is included
all over the place from common code, too, so we need some extra
logic via "#ifdef NEED_CPU_H" here to make sure that we can
compile all files without problems.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1498454578-18709-4-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
That reduces DSDT by 910 bytes when memory hotplug
isn't enabled.
While doing so drop intermediate variables/arguments
passing around ACPI_MEMORY_HOTPLUG_IO_LEN and making
it local to memory_hotplug.c, hardcoding it there as
it can't change.
Also don't pass around ACPI_MEMORY_HOTPLUG_BASE through
intermediate variables/arguments where it's not needed.
Instead initialize in module static variable when MMIO
region is mapped and use that within memory_hotplug.c
whenever it's required.
That way MMIO base specified only at one place and AML
with MMIO would always use the same value.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
as they use completely different way to handle hotplug event
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
For compatibility reasons PC/Q35 will start with legacy
CPU hotplug interface by default but with new CPU hotplug
AML code since 2.7 machine type. That way legacy firmware
that doesn't use QEMU generated ACPI tables will be
able to continue using legacy CPU hotplug interface.
While new machine type, with firmware supporting QEMU
provided ACPI tables, will generate new CPU hotplug AML,
which will switch to new CPU hotplug interface when
guest OS executes its _INI method on ACPI tables
loading.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it adds HW and AML parts for CPU_Device._OST method
handling to allow OSPM reports status of hot-(un)plug
operation.
And extends QMP command query-acpi-ospm-status to report
CPU's OST info along with already reported PC-DIMM devices.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it adds hw registers needed for handling CPU hot-remove and
corresponding AML methods to request and eject a CPU with
necessary hotplug callbacks in pc,piix4,ich9 code.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it adds CPU objects to DSDT with _STA method
and QEMU side of CPU hotplug interface initialization
with registers sufficient to handle _STA requests,
including necessary hotplug callbacks in piix4,ich9 code.
Hot-(un)plug hw/acpi parts will be added by
corresponding follow up patches.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It will be used to select which hotplug call-back is called
and for switching from legacy mode into new one.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it reduces number of args passed in handlers by 1 and
a number of used proxy wrappers saving ~20LOC.
Also it allows to make cpu/mem hotplug code more
universal as it would allow ARM to reuse it without
rewrite by providing its own send_event callback
to trigger events usiong GPIO instead of GPE
as fixed hadrware ACPI model doen't have GPE at all.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The enable_tco arguments are always true, so they are not needed
anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Similar to the previous patch, it's nice to have all functions
in the tree that involve a visitor and a name for conversion to
or from QAPI to consistently stick the 'name' parameter next
to the Visitor parameter.
Done by manually changing include/qom/object.h and qom/object.c,
then running this Coccinelle script and touching up the fallout
(Coccinelle insisted on adding some trailing whitespace).
@ rule1 @
identifier fn;
typedef Object, Visitor, Error;
identifier obj, v, opaque, name, errp;
@@
void fn
- (Object *obj, Visitor *v, void *opaque, const char *name,
+ (Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp) { ... }
@@
identifier rule1.fn;
expression obj, v, opaque, name, errp;
@@
fn(obj, v,
- opaque, name,
+ name, opaque,
errp)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
JSON uses "name":value, but many of our visitor interfaces were
called with visit_type_FOO(v, &value, name, errp). This can be
a bit confusing to have to mentally swap the parameter order to
match JSON order. It's particularly bad for visit_start_struct(),
where the 'name' parameter is smack in the middle of the
otherwise-related group of 'obj, kind, size' parameters! It's
time to do a global swap of the parameter ordering, so that the
'name' parameter is always immediately after the Visitor argument.
Additional reason in favor of the swap: the existing include/qjson.h
prefers listing 'name' first in json_prop_*(), and I have plans to
unify that file with the qapi visitors; listing 'name' first in
qapi will minimize churn to the (admittedly few) qjson.h clients.
Later patches will then fix docs, object.h, visitor-impl.h, and
those clients to match.
Done by first patching scripts/qapi*.py by hand to make generated
files do what I want, then by running the following Coccinelle
script to affect the rest of the code base:
$ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'`
I then had to apply some touchups (Coccinelle insisted on TAB
indentation in visitor.h, and botched the signature of
visit_type_enum() by rewriting 'const char *const strings[]' to
the syntactically invalid 'const char*const[] strings'). The
movement of parameters is sufficient to provoke compiler errors
if any callers were missed.
// Part 1: Swap declaration order
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_start_struct
-(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type bool, TV, T1;
identifier ARG1;
@@
bool visit_optional
-(TV v, T1 ARG1, const char *name)
+(TV v, const char *name, T1 ARG1)
{ ... }
@@
type TV, TErr, TObj, T1;
identifier OBJ, ARG1;
@@
void visit_get_next_type
-(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp)
{ ... }
@@
type TV, TErr, TObj, T1, T2;
identifier OBJ, ARG1, ARG2;
@@
void visit_type_enum
-(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp)
{ ... }
@@
type TV, TErr, TObj;
identifier OBJ;
identifier VISIT_TYPE =~ "^visit_type_";
@@
void VISIT_TYPE
-(TV v, TObj OBJ, const char *name, TErr errp)
+(TV v, const char *name, TObj OBJ, TErr errp)
{ ... }
// Part 2: swap caller order
@@
expression V, NAME, OBJ, ARG1, ARG2, ERR;
identifier VISIT_TYPE =~ "^visit_type_";
@@
(
-visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR)
+visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-visit_optional(V, ARG1, NAME)
+visit_optional(V, NAME, ARG1)
|
-visit_get_next_type(V, OBJ, ARG1, NAME, ERR)
+visit_get_next_type(V, NAME, OBJ, ARG1, ERR)
|
-visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR)
+visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR)
|
-VISIT_TYPE(V, OBJ, NAME, ERR)
+VISIT_TYPE(V, NAME, OBJ, ERR)
)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-11-git-send-email-peter.maydell@linaro.org
Commit fba72476c6 ("ich9: add smm_enabled field and arguments") detached
SMM availability from kvm_enabled(). However, the comment in pm_reset()
was not updated; let's do it now.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Otherwise on reboot firmware might think (due to APMC_EN remaining set
from the previous boot) that SMI support is absent.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
By declaring another .subsections array for vmstate_tco_io_state made
vmstate_memhp_state not registered anymore. There must be only one
.subsections array for all subsections.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Amit Shah <amit.shah@redhat.com>
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
This interface provides some registers within a 32-byte range and can be
acessed through PCI-to-LPC bridge interface (PMBASE + 0x60).
It's commonly used as a watchdog timer to detect system lockups through
SMIs that are generated -- if TCO_EN bit is set -- on every timeout. If
NO_REBOOT bit is not set in GCS (General Control and Status register),
the system will be resetted upon second timeout if TCO_RLD register
wasn't previously written to prevent timeout.
This patch adds support to TCO watchdog logic and few other features
like mapping NMIs to SMIs (NMI2SMI_EN bit), system intruder detection,
etc. are not implemented yet.
Signed-off-by: Paulo Alcantara <pcacjr@zytor.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Q35's ACPI device is hard-coding SMM availability to KVM. Place the
logic where the board is created instead, so that it will be possible
to override it.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We create optional sections with this patch. But we already have
optional subsections. Instead of having two mechanism that do the
same, we can just generalize it.
For subsections we just change:
- Add a needed function to VMStateDescription
- Remove VMStateSubsection (after removal of the needed function
it is just a VMStateDescription)
- Adjust the whole tree, moving the needed function to the corresponding
VMStateDescription
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add write mask for the smi enable register, so we can disable write
access to certain bits. Open all bits on reset. Disable write access
to GBL_SMI_EN when SMI_LOCK (in ich9 lpc pci config space) is set.
Write access to SMI_LOCK itself is disabled too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch only modifies the function prototype and updates all chipset
code that calls acpi_pm1_cnt_init() to pass in their own disable_s3 and
disable_s4 settings. vt82c686 is assumed to be fixed "S3 and S4 enabled".
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1204696
Cc: Amit Shah <amit.shah@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
This patch adds unplug cb for memory device. It resets memory status
"is_enabled" in acpi_memory_unplug_cb(), removes the corresponding
memory region, unregisters vmstate, and unparents the object.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds unplug request cb for memory device, and adds the
is_removing boolean field to MemStatus. This field is used to indicate
whether the memory device in slot has been requested to be ejected.
This field is set to true in acpi_memory_unplug_request_cb().
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Memory and CPU hot unplug are both asynchronous procedures.
When the unplug operation happens, unplug request cb is called first.
And when guest OS finished handling unplug, unplug cb will be called
to do the real removal of device.
This patch adds hotunplug cb to ich9, which memory and CPU
hot unplug will use it.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Memory and CPU hot unplug are both asynchronous procedures.
They both need unplug request cb when the unplug operation happens.
This patch adds hotunplug request cb for ich9, and memory and CPU
hot unplug will share it.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A bunch of fixes all over the place. Also, beginning to generalize acpi build
code for reuse by ARM.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUx465AAoJECgfDbjSjVRpzewIAI/tzV1oCR1D/YDYBYpiK68W
85JJbyR90DpS9unjrkeUHEnJgkegCk8dMXlWJOlshpwxDw2khC2ol0yS6siwC6Z/
1peL9E5zHz2H8KWfH6JlhqLETovZxjd5Uv3q1mWULvK+zZcPzeQDCky5I8mbEw4b
0LGDGX8mcLlDnit9mnAbgHu7cbqGa0jtXoJTFveKdxQtHdyj4cAg0wCjOLhnEo6s
fJP7K1TJ2Ptiwwlk2cnj8T4Z9AoJkWjpFfr94dST2KqR3z5j8OUZYYhifrZa3e8t
qxO/UatY4IwSnsmWCn/hvzlHZFa03sc9nPIkAlj96j78sHqPafDJxCdnwlX8pF8=
=Kfwr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pci, pc, virtio fixes and cleanups
A bunch of fixes all over the place. Also, beginning to generalize acpi build
code for reuse by ARM.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 27 Jan 2015 13:12:25 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc-dimm: Add Error argument to pc_existing_dimms_capacity
pc-dimm: Make pc_existing_dimms_capacity global
pc: Fix DIMMs capacity calculation
smbios: Don't report unknown CPU speed (fix SVVP regression)
smbios: Fix dimm size calculation when RAM is multiple of 16GB
bios-linker-loader: move source to common location
bios-linker-loader: move header to common location
virtio: fix feature bit checks
bios-tables-test: split piix4 and q35 tests
acpi: build_append_nameseg(): add padding if necessary
acpi: update generated hex files
acpi-test: update expected DSDT
pc: acpi: fix WindowsXP BSOD when memory hotplug is enabled
pci: Split pcie_host_mmcfg_map()
Add some trace calls to pci.c.
ich9: add disable_s3, disable_s4, s4_val properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
PIIX4 has disable_s3 and disable_s4 properties to enable or disable PM
functions. Add such properties to the ICH9 chipset as well for the Q35
machine type.
S3 / S4 are not guaranteed to always work (needs work in the guest as
well as QEMU for things to work properly), and disabling advertising of
these features ensures guests don't go into zombie state if something
isn't working right.
The defaults are kept the same as in PIIX4: both S3 and S4 are enabled
by default.
These can be disabled via the cmdline:
... -global ICH9-LPC.disable_s3=1 -global ICH9-LPC.disable_s4=1
Note: some guests can fake hibernation by writing a hibernate image and
doing a shutdown instead of S4 if S4 isn't available; there's nothing we
can do guests to stop doing this, and this patch can't affect that
functionality.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Rename:
AcpiCpuHotplug_init --> acpi_cpu_hotplug_init
AcpiCpuHotplug_ops --> acpi_cpu_hotplug_ops
for better readability, just cleanup.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Convert notifier based hotplug to hotplug_handler API.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: rebase
... using TYPE_ACPI_DEVICE_IF interface.
Which provides status reporting of ACPI declared memory devices
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Adds an optional subsection that allows to migrate current
state of acpi_memory_hotplug of ACPI PM device.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add memory hotplug initialization/handling to ICH9 LPC device
and enable it by default for post 2.0 machine types
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
.. use IO port 0cd8-0xcf7 range for CPU present bitmap
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
it fixes IRQ storm since guest isn't able to lower SCI IRQ
after it has been handled when it clears GPE event.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
... and rename it into acpi_update_sci() since it changes
SCI on only on PM registers status.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds APIs that will be used to fill in
acpi tables, implemented using QOM,
to various ich9 components.
Some information is still missing in QOM,
so we fall back on lookups by type instead.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Thomas Huth