x86_cpudef_init() doesn't do anything anymore, cpudef_init(),
cpudef_setup(), and x86_cpudef_init() can be finally removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-16-git-send-email-peter.maydell@linaro.org
Done with this Coccinelle semantic patch
@@
expression FMT, E, S;
expression list ARGS;
@@
- error_report(FMT, ARGS, error_get_pretty(E));
+ error_reportf_err(E, FMT/*@@@*/, ARGS);
(
- error_free(E);
|
exit(S);
|
abort();
)
followed by a replace of '%s"/*@@@*/' by '"' and some line rewrapping,
because I can't figure out how to make Coccinelle transform strings.
We now use the error whole instead of just its message obtained with
error_get_pretty(). This avoids suppressing its hint (see commit
50b7b00), but I can't see how the errors touched in this commit could
come with hints.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1450452927-8346-12-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
To share smbios among different architectures, this patch moves SMBIOS
code (smbios.c and smbios.h) from x86 specific folders into new
hw/smbios directories. As a result, CONFIG_SMBIOS=y is defined in
x86 default config files.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To make changes easier, with the copy, I maintained almost all include
files. Now I remove the unnecessary ones on this patch. This compiles
on linux x64 with all architectures configured, and cross-compiles for
windows 32 and 64 bits.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For historic reasons, ram migration have been on arch_init.c. Just
split it into migration/ram.c, the same that happened with block.c.
There is only code movement, no changes altogether.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The dirty memory bitmap is managed by ram_addr.h and copied to
migration_bitmap[] periodically during live migration.
Move the code to sync the bitmap to ram_addr.h where related code lives.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <1417519399-3166-5-git-send-email-stefanha@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The target-x86_64.conf sysconfig file has been empty and essentially ignored
now for several years. This change removes the unused file to enable moving
towards a stateless configuration.
Signed-off-by: Ikey Doherty <michael.i.doherty@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
If live migration is very fast and can be completed in 1 second,
the dirty_sync_count of MigrationState will not be updated.
Then you will see "dirty sync count: 0" in qemu monitor even if
the actual dirty sync count is not 0.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This bug manifested itself as a VM that could not be resumed by libvirt
following a migration:
# virsh resume example
error: Failed to resume domain example
error: internal error: cannot parse json {"return":
{"xbzrle-cache":
{..., "cache-miss-rate": -nan, ...},
...
}
}: lexical error: malformed number, a digit is required after the minus sign.
This patch also ensures xbzrle_cache_miss_prev and iterations_prev are
cleared at the start of the migration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Implement the core logic of multiple thread decompression,
the decompression can work now.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Now, multiple thread compression can co-work with xbzrle. when
xbzrle is on, multiple thread compression will only work at the
first round of RAM data sync.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Implement the core logic of the multiple thread compression. At this
point, multiple thread compression can't co-work with xbzrle yet.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Split the function save_zero_page from ram_save_page so that we can
reuse it later.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Define the data structure and variables used to do multiple thread
decompression, and add the code to initialize and free them.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Define the data structure and variables used to do multiple thread
compression, and add the code to initialize and free them.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add the code to create and destroy the multiple threads those will be
used to do data decompression. Left some functions empty just to keep
clearness, and the code will be added later.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add the code to create and destroy the multiple threads those will
be used to do data compression. Left some functions empty to keep
clearness, and the code will be added later.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Reviewed-by: Dr.David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Compression code (still not on tree) want to call this funtion from
outside the migration thread, so we can't write to last_sent_block.
Instead of reverting full patch:
[PULL 07/11] save_block_hdr: we can recalculate
Just revert the parts that touch last_sent_block.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
There is already a helper function ram_bytes_total(), we can use it to
help counting the total number of pages used by ram blocks.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It has always been a page header, not a block header. Once there, the
flag argument was only passed to make a bit or with it, just do the or
on the caller.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a parameter to pass the number of bytes written, and make it return
the number of pages written instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a parameter to pass the number of bytes written, and make it return
the number of pages written instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Add a parameter to pass the number of bytes written, and make it return
the number of pages written instead.
Signed-off-by: Juan Quintela <quintela@redhat.com>
It used to be an int, but then we can't pass directly the
bytes_transferred parameter, that would happen later in the series.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Allow "unlocked" reads of the ram_list by using an RCU-enabled QLIST.
The ramlist mutex is kept. call_rcu callbacks are run with the iothread
lock taken, but that may change in the future. Writers still take the
ramlist mutex, but they no longer need to assume that the iothread lock
is taken.
Readers of the list, instead, no longer require either the iothread
or ramlist mutex, but they need to use rcu_read_lock() and
rcu_read_unlock().
One place in arch_init.c was downgrading from write side to read side
like this:
qemu_mutex_lock_iothread()
qemu_mutex_lock_ramlist()
...
qemu_mutex_unlock_iothread()
...
qemu_mutex_unlock_ramlist()
and the equivalent idiom is:
qemu_mutex_lock_ramlist()
rcu_read_lock()
...
qemu_mutex_unlock_ramlist()
...
rcu_read_unlock()
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QLIST has RCU-friendly primitives, so switch to it.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Mike Day <ncmike@ncultra.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid hot pages being replaced by others to remarkably decrease cache
misses
Sample results with the test program which quote from xbzrle.txt ran in
vm:(migrate bandwidth:1GE and xbzrle cache size 8MB)
the test program:
include <stdlib.h>
include <stdio.h>
int main()
{
char *buf = (char *) calloc(4096, 4096);
while (1) {
int i;
for (i = 0; i < 4096 * 4; i++) {
buf[i * 4096 / 4]++;
}
printf(".");
}
}
before this patch:
virsh qemu-monitor-command test_vm '{"execute": "query-migrate"}'
{"return":{"expected-downtime":1020,"xbzrle-cache":{"bytes":1108284,
"cache-size":8388608,"cache-miss-rate":0.987013,"pages":18297,"overflow":8,
"cache-miss":1228737},"status":"active","setup-time":10,"total-time":52398,
"ram":{"total":12466991104,"remaining":1695744,"mbps":935.559472,
"transferred":5780760580,"dirty-sync-counter":271,"duplicate":2878530,
"dirty-pages-rate":29130,"skipped":0,"normal-bytes":5748592640,
"normal":1403465}},"id":"libvirt-706"}
18k pages sent compressed in 52 seconds.
cache-miss-rate is 98.7%, totally miss.
after optimizing:
virsh qemu-monitor-command test_vm '{"execute": "query-migrate"}'
{"return":{"expected-downtime":2054,"xbzrle-cache":{"bytes":5066763,
"cache-size":8388608,"cache-miss-rate":0.485924,"pages":194823,"overflow":0,
"cache-miss":210653},"status":"active","setup-time":11,"total-time":18729,
"ram":{"total":12466991104,"remaining":3895296,"mbps":937.663549,
"transferred":1615042219,"dirty-sync-counter":98,"duplicate":2869840,
"dirty-pages-rate":58781,"skipped":0,"normal-bytes":1588404224,
"normal":387794}},"id":"libvirt-266"}
194k pages sent compressed in 18 seconds.
The value of cache-miss-rate decrease to 48.59%.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
If block used_length does not match, try to resize it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
This patch allows us to distinguish between two
length values for each block:
max_length - length of memory block that was allocated
used_length - length of block used by QEMU/guest
Currently, we set used_length - max_length, unconditionally.
Follow-up patches allow used_length <= max_length.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
The static variables in migration_bitmap_sync will not be reset in
the case of a second attempted migration.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
During migration, the values read from migration stream during ram load
are not validated. Especially offset in host_from_stream_offset() and
also the length of the writes in the callers of said function.
To fix this, we need to make sure that the [offset, offset + length]
range fits into one of the allocated memory regions.
Validating addr < len should be sufficient since data seems to always be
managed in TARGET_PAGE_SIZE chunks.
Fixes: CVE-2014-7840
Note: follow-up patches add extra checks on each block->host access.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
this patch extends commit db80fac by not only checking
for unknown flags, but also filtering out unknown flag
combinations.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
As the function always return 1, it is not needed anymore.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When live migrate fails due to a section length mismatch we currently
see an error message like:
Length mismatch: 0000:00:03.0/virtio-net-pci.rom: 10000 in != 20000
The section lengths are in fact in hex, so this should read
Length mismatch: 0000:00:03.0/virtio-net-pci.rom: 0x10000 in != 0x20000
Correct the error string to reflect this.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
if a saved vm has unknown flags in the memory data qemu
currently simply ignores this flag and continues which
yields in an unpredictable result.
This patch catches all unknown flags and aborts the
loading of the vm. Additionally error reports are thrown
if the migration aborts abnormally.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We call g_free() after cache_fini() in migration_end(), but we don't
call it after cache_fini() in xbzrle_cache_resize(), leaking the
memory.
cache_init() and cache_fini() are a pair. Since cache_init()
allocates the cache, let cache_fini() free it. This plugs the leak.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Replace fprintf(stderr,...) with error_report() in the file
arch_init.c. The trailing "\n"s of the @fmt argument have been removed
because @fmt of error_report() should not contain newline.
Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
ram_save_block is getting a bit too complicated, and does two separate
things:
1) Finds a page to send
2) Sends the page (dealing with compression etc)
Split into 'ram_save_page' to send the page and deal with compression (2)
Rename remaining function to 'ram_find_and_save_block'
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
For xbzrle_decode_buffer(), when decoding contents will exceed writing
buffer, it will return -1, so need not check the return value whether
large than writing buffer.
And when failure occurs within load_xbzrle(), it always return -1
without any resources which need release.
So can remove the related checking statements, and also can remove 'rc'
and 'ret' local variables,
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
When DPRINTF() has effect, the original author wants to print all
ram_load() calling results. So need use 'goto' instead of 'return'
within ram_load(), just like other areas have done.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
expose the count that logs the times of updating the dirty bitmap to
end user.
Signed-off-by: ChenLiang <chenliang88@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Eduardo Habkost