Commit b359f4b203 "tests: Rename UserDefNativeListUnion to
UserDefListUnion" renamed test_clone_native_list() to
test_clone_list_union(). The function has nothing to do with unions.
Rename it to test_clone_list().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-24-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Replace simple union __org.qemu_x-Union1 with flat union
__org.qemu_x-Union2, except drop it from __org.qemu_x-command, because
there it's only used to pull it into QMP. Now drop the unused
-Union1, and rename -Union2 to -Union.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-20-armbru@redhat.com>
test_clone_complex3() uses simple union __org.qemu_x-Union1 to cover
arrays. Use UserDefOneList instead. Unions are still covered by
test_clone_complex1().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-19-armbru@redhat.com>
Command boxed-union uses simple union UserDefListUnion to cover
unions. Use UserDefFlatUnion instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-16-armbru@redhat.com>
test_clone_complex1() uses simple union UserDefListUnion to cover
unions. Use UserDefFlatUnion instead. Arrays are still covered by
test_clone_complex3().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-15-armbru@redhat.com>
The test_visitor_out_list_union_FOO() use simple union
UserDefListUnion to cover lists of builtin types. Rewrite as
test_visitor_out_list_struct(), using struct ArrayStruct and a lot
less code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-14-armbru@redhat.com>
The test_visitor_in_list_union_FOO() use simple union UserDefListUnion
to cover lists of builtin types. Rewrite as
test_visitor_in_list_struct(), using struct ArrayStruct and a lot less
code.
test_visitor_in_fail_union_list() uses UserDefListUnion to cover
"variant members don't match the discriminator value". Cover that in
test_visitor_in_fail_union_flat() instead, and drop
test_visitor_in_fail_union_list(). Appropriating the former for this
purpose is okay, because it actually failed due to missing
discriminator, which is still covered by
test_visitor_in_fail_union_flat_no_discrim().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-13-armbru@redhat.com>
Simple unions predate flat unions. Having both complicates the QAPI
schema language and the QAPI generator. We haven't been using simple
unions in new code for a long time, because they are less flexible and
somewhat awkward on the wire.
To prepare for their removal, convert simple union SocketAddressLegacy
to an equivalent flat one, with existing enum SocketAddressType
replacing implicit enum type SocketAddressLegacyKind. Adds some
boilerplate to the schema, which is a bit ugly, but a lot easier to
maintain than the simple union feature.
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210917143134.412106-9-armbru@redhat.com>
Commit 155e1c82ed deprecated the raspi2/raspi3 machine names.
Use the recommended new names: raspi2b and raspi3b.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Message-id: 20210827060815.2384760-2-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
From clang-13:
tests/unit/test-iov.c:161:26: error: variable 't' set but not used \
[-Werror,-Wunused-but-set-variable]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This new adaptor visitor takes a single field of the adaptee, and exposes it
with a different name.
This will be used for QOM alias properties. Alias targets can of course
have a different name than the alias property itself (e.g. a machine's
pflash0 might be an alias of a property named 'drive'). When the target's
getter or setter invokes the visitor, it will use a different name than
what the caller expects, and the visitor will not be able to find it
(or will consume erroneously).
The solution is for alias getters and setters to wrap the incoming
visitor, and forward the sole field that the target is expecting while
renaming it appropriately.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the crypto layer exposes support for a 'des-rfb'
algorithm which is just normal single-DES, with the bits
in each key byte reversed. This special key munging is
required by the RFB protocol password authentication
mechanism.
Since the crypto layer is generic shared code, it makes
more sense to do the key byte munging in the VNC server
code, and expose normal single-DES support.
Replacing cipher 'des-rfb' by 'des' looks like an incompatible
interface change, but it doesn't matter. While the QMP schema
allows any QCryptoCipherAlgorithm for the 'cipher-alg' field
in QCryptoBlockCreateOptionsLUKS, the code restricts what can
be used at runtime. Thus the only effect is a change in error
message.
Original behaviour:
$ qemu-img create -f luks --object secret,id=sec0,data=123 -o cipher-alg=des-rfb,key-secret=sec0 demo.luks 1G
Formatting 'demo.luks', fmt=luks size=1073741824 key-secret=sec0 cipher-alg=des-rfb
qemu-img: demo.luks: Algorithm 'des-rfb' not supported
New behaviour:
$ qemu-img create -f luks --object secret,id=sec0,data=123 -o cipher-alg=des-rfb,key-secret=sec0 demo.luks 1G
Formatting 'demo.luks', fmt=luks size=1073741824 key-secret=sec0 cipher-alg=des-fish
qemu-img: demo.luks: Invalid parameter 'des-rfb'
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The GNUTLS crypto provider doesn't support DES-ECB, only DES-CBC.
We can use the latter to simulate the former, if we encrypt only
1 block (8 bytes) of data at a time, using an all-zeros IV. This
is a very inefficient way to use the QCryptoCipher APIs, but
since the VNC authentication challenge is only 16 bytes, this
is acceptable. No other part of QEMU should be using DES. This
test case demonstrates the equivalence of ECB and CBC for the
single-block case.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using error_fatal provides better diagnostics when tests
failed, than using asserts, because we see the text of
the error message.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since we now require gcrypt >= 1.8.0, there is no need
to exclude the pbkdf test case.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The main method checks whether the cipher choice is supported
at runtime, so there is no need for compile time conditions.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
-M was the sole user of qemu_opts_set and qemu_opts_set_defaults,
remove them and the arguments that they used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch introduces a function that merges two keyval-produced
(or keyval-like) QDicts. It can be used to emulate the behavior of
.merge_lists = true QemuOpts groups, merging -readconfig sections and
command-line options in a single QDict, and also to implement -set.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It can be difficult to debug issues with BHs in production environments.
Although BHs can usually be identified by looking up their ->cb()
function pointer, this requires debug information for the program. It is
also not possible to print human-readable diagnostics about BHs because
they have no identifier.
This patch adds a name to each BH. The name is not unique per instance
but differentiates between cb() functions, which is usually enough. It's
done by changing aio_bh_new() and friends to macros that stringify cb.
The next patch will use the name field when reporting leaked BHs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210414200247.917496-2-stefanha@redhat.com>
Move supports_backing check of bdrv_reopen_parse_backing to called
(through bdrv_set_backing_noperm()) bdrv_set_file_or_backing_noperm()
function. The check applies to general case, so it's appropriate for
bdrv_set_file_or_backing_noperm().
We have to declare backing support for two test drivers, otherwise new
check fails.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210610120537.196183-7-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make it depend on gnutls too, since it is only used as part of gnutls
tests.
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
meson.build already decides whether it is possible to build the TLS
test suite. There is no need to include that in the source as well.
The dummy tests in fact are broken because they do not produce valid
TAP output (empty output is rejected by scripts/tap-driver.pl).
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a testcase for the test fixed by commit 'async: the main AioContext
is only "current" if under the BQL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210614110214.726722-1-pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If we want to wake up a coroutine from a worker thread, aio_co_wake()
currently does not work. In that scenario, aio_co_wake() calls
aio_co_enter(), but there is no current AioContext and therefore
qemu_get_current_aio_context() returns the main thread. aio_co_wake()
then attempts to call aio_context_acquire() instead of going through
aio_co_schedule().
The default case of qemu_get_current_aio_context() was added to cover
synchronous I/O started from the vCPU thread, but the main and vCPU
threads are quite different. The main thread is an I/O thread itself,
only running a more complicated event loop; the vCPU thread instead
is essentially a worker thread that occasionally calls
qemu_mutex_lock_iothread(). It is only in those critical sections
that it acts as if it were the home thread of the main AioContext.
Therefore, this patch detaches qemu_get_current_aio_context() from
iothreads, which is a useless complication. The AioContext pointer
is stored directly in the thread-local variable, including for the
main loop. Worker threads (including vCPU threads) optionally behave
as temporary home threads if they have taken the big QEMU lock,
but if that is not the case they will always schedule coroutines
on remote threads via aio_co_schedule().
With this change, the stub qemu_mutex_iothread_locked() must be changed
from true to false. The previous value of true was needed because the
main thread did not have an AioContext in the thread-local variable,
but now it does have one.
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210609122234.544153-1-pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[eblake: tweak commit message per Vladimir's review]
Signed-off-by: Eric Blake <eblake@redhat.com>
Coverity complains that we don't check for failures from dup()
and mkstemp(); add asserts that these syscalls succeeded.
Fixes: Coverity CID 1432516, 1432574
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20210525134458.6675-7-peter.maydell@linaro.org
This variable is just a cache for !(bs->open_flags & BDRV_O_RDWR),
which we have to synchronize everywhere. Let's just drop it and
consistently use bdrv_is_read_only().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210527154056.70294-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The replication.h file is included from migration/colo.c and tests/unit/test-replication.c,
so it should be in include/.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"qemu/typedefs.h" is enough for include/block/write-threshold.h header
with forward declaration of BlockDriverState. Also drop extra includes
from block/write-threshold.c and tests/unit/test-write-threshold.c
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210506090621.11848-9-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We don't need this extra logic: it doesn't make code simpler.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-8-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Testing set/get of one 64bit variable doesn't seem necessary. We have a
lot of such variables. Also remaining tests do test set/get anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-7-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_write_threshold_exceeded() is unused.
bdrv_write_threshold_is_set() is used only to double check the value of
bs->write_threshold_offset in tests. No real sense in it (both tests do
check real value with help of bdrv_write_threshold_get())
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[mreitz: Adjusted commit message as per Eric's suggestion]
Signed-off-by: Max Reitz <mreitz@redhat.com>
These tests use bdrv_write_threshold_exceeded() API, which is used only
for test (since pre-previous commit). Better is testing real API, which
is used in block.c as well.
So, let's call bdrv_write_threshold_check_write(), and check is
bs->write_threshold_offset cleared or not (it's cleared iff threshold
triggered).
Also we get rid of BdrvTrackedRequest use here. Note, that paranoiac
bdrv_check_request() calls were added in 8b1170012b to protect
BdrvTrackedRequest. Drop them now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-4-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
bdrv_append is not very good for inserting filters: it does extra
permission update as part of bdrv_set_backing_hd(). During this update
filter may conflict with other parents of top_bs.
Instead, let's first do all graph modifications and after it update
permissions.
append-greedy-filter test-case in test-bdrv-graph-mod is now works, so
move it out of debug option.
Note: bdrv_append() is still only works for backing-child based
filters. It's something to improve later.
Note2: we use the fact that bdrv_append() is used to append new nodes,
without backing child, so we don't need frozen check and inherits_from
logic from bdrv_set_backing_hd().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-22-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
inore_children thing doesn't help to track all propagated permissions
of children we want to ignore. The simplest way to correctly update
permissions is update graph first and then do permission update. In
this case we just referesh permissions for the whole subgraph (in
topological-sort defined order) and everything is correctly calculated
automatically without any ignore_children.
So, refactor bdrv_replace_node_common to first do graph update and then
refresh the permissions.
Test test_parallel_exclusive_write() now pass, so move it out of
debugging "if".
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-18-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Rewrite bdrv_check_perm(), bdrv_abort_perm_update() and bdrv_set_perm()
to update nodes in topological sort order instead of simple DFS. With
topologically sorted nodes, we update a node only when all its parents
already updated. With DFS it's not so.
Consider the following example:
A -+
| |
| v
| B
| |
v |
C<-+
A is parent for B and C, B is parent for C.
Obviously, to update permissions, we should go in order A B C, so, when
we update C, all parent permissions already updated. But with current
approach (simple recursion) we can update in sequence A C B C (C is
updated twice). On first update of C, we consider old B permissions, so
doing wrong thing. If it succeed, all is OK, on second C update we will
finish with correct graph. But if the wrong thing failed, we break the
whole process for no reason (it's possible that updated B permission
will be less strict, but we will never check it).
Also new approach gives a way to simultaneously and correctly update
several nodes, we just need to run bdrv_topological_dfs() several times
to add all nodes and their subtrees into one topologically sorted list
(next patch will update bdrv_replace_node() in this manner).
Test test_parallel_perm_update() is now passing, so move it out of
debugging "if".
We also need to support ignore_children in
bdrv_parent_perms_conflict()
For test 283 order of conflicting parents check is changed.
Note also that in bdrv_check_perm() we don't check for parents conflict
at root bs, as we may be in the middle of permission update in
bdrv_reopen_multiple(). bdrv_reopen_multiple() will be updated soon.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-14-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have too much comments for this feature. It seems better just don't
do it. Most of real users (tests don't count) have to create additional
reference.
Drop also comment in external_snapshot_prepare:
- bdrv_append doesn't "remove" old bs in common sense, it sounds
strange
- the fact that bdrv_append can fail is obvious from the context
- the fact that we must rollback all changes in transaction abort is
known (it's the direct role of abort)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_append() is not quite good for inserting filters: it does extra
permission update in intermediate state, where filter get it filtered
child but is not yet replace it in a backing chain.
Some filters (for example backup-top) may want permissions even when
have no parents. And described intermediate state becomes invalid.
That's (half a) reason, why we need "inactive" state for backup-top
filter.
bdrv_append() will be improved later, now let's add a unit test.
Now test fails, so it runs only with -d flag. To run do
./test-bdrv-graph-mod -d -p /bdrv-graph-mod/append-greedy-filter
from <build-directory>/tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-4-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add test to show that simple DFS recursion order is not correct for
permission update. Correct order is topological-sort order, which will
be introduced later.
Consider the block driver which has two filter children: one active
with exclusive write access and one inactive with no specific
permissions.
And, these two children has a common base child, like this:
┌─────┐ ┌──────┐
│ fl2 │ ◀── │ top │
└─────┘ └──────┘
│ │
│ │ w
│ ▼
│ ┌──────┐
│ │ fl1 │
│ └──────┘
│ │
│ │ w
│ ▼
│ ┌──────┐
└───────▶ │ base │
└──────┘
So, exclusive write is propagated.
Assume, we want to make fl2 active instead of fl1.
So, we set some option for top driver and do permission update.
If permission update (remember, it's DFS) goes first through
top->fl1->base branch it will succeed: it firstly drop exclusive write
permissions and than apply them for another BdrvChildren.
But if permission update goes first through top->fl2->base branch it
will fail, as when we try to update fl2->base child, old not yet
updated fl1->base child will be in conflict.
Now test fails, so it runs only with -d flag. To run do
./test-bdrv-graph-mod -d -p /bdrv-graph-mod/parallel-perm-update
from <build-directory>/tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-3-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the test that shows that concept of ignore_children is incomplete.
Actually, when we want to update something, ignoring permission of some
existing BdrvChild, we should ignore also the propagated effect of this
child to the other children. But that's not done. Better approach
(update permissions on already updated graph) will be implemented
later.
Now the test fails, so it's added with -d argument to not break make
check.
Test fails with
"Conflicts with use by fl1 as 'backing', which does not allow 'write' on base"
because when updating permissions we can ignore original top->fl1
BdrvChild. But we don't ignore exclusive write permission in fl1->base
BdrvChild, which is propagated. Correct thing to do is make graph
change first and then do permission update from the top node.
To run test do
./test-bdrv-graph-mod -d -p /bdrv-graph-mod/parallel-exclusive-write
from <build-directory>/tests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210428151804.439460-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Create a job that remains on STANDBY after a drained section, and see
that invoking job_wait_unpaused() will get it unstuck.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210409120422.144040-5-mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
-----BEGIN PGP SIGNATURE-----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=UwXe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/marcandre/tags/for-6.0-pull-request' into staging
For 6.0 misc patches under my radar.
V2:
- "tests: Add tests for yank with the chardev-change case" updated
- drop the readthedoc theme patch
# gpg: Signature made Thu 01 Apr 2021 12:54:52 BST
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/marcandre/tags/for-6.0-pull-request:
tests: Add tests for yank with the chardev-change case
chardev: Fix yank with the chardev-change case
chardev/char.c: Always pass id to chardev_new
chardev/char.c: Move object_property_try_add_child out of chardev_new
yank: Always link full yank code
yank: Remove dependency on qiochannel
docs: simplify each section title
dbus-vmstate: Increase the size of input stream buffer used during load
util: fix use-after-free in module_load_one
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Test that rwlock upgrade is fair, and that readers go back to sleep if
a writer is in line.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20210325112941.365238-6-pbonzini@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Mingw recognizes that "0x" has value 0 without setting errno, but
fails to advance endptr to the trailing garbage 'x'. This in turn
showed up in our recent testsuite additions for qemu_strtosz (commit
1657ba44b4 utils: Enhance testsuite for do_strtosz()); adjust our
remaining tests to show that we now work around this windows bug.
This patch intentionally fails check-syntax for use of strtol.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210317143325.2165821-3-eblake@redhat.com>
Message-Id: <20210323165308.15244-15-alex.bennee@linaro.org>
Markus Armbruster