To support NUMA, it needs to generate SRAT ACPI table.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-6-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move acpi_build_srat_memory to common place so that it could be reused
by ARM. Rename it to build_srat_memory.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-5-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ACPI spec says that Proximity Domain is an "Integer that represents
the proximity domain to which the processor belongs". So define it as a
uint32_t.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Generate memory nodes according to NUMA topology. Set numa-node-id
property for cpu and memory nodes.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-2-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Drop the old SysBus init function and use instance_init
* Move graphic_console_init into realize stage
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1462417489-28603-2-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The various load/store variants under disas_ldst_reg can all reuse the
same decoding for opc, size, rt and is_vector.
This patch unifies the decoding in preparation for generating
instruction syndromes for data aborts.
This will allow us to reduce the number of places to hook in updates
to the load/store state needed to generate the insn syndromes.
No functional change.
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1461931684-1867-7-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use extract32 instead of open coding the bit masking when decoding
is_signed and is_extended. This streamlines the decoding with some
of the other ldst variants.
No functional change.
Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1461931684-1867-6-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split the data abort syndrome generator into two versions:
One with a valid Instruction Specific Syndrome (ISS) and another without.
The following new flags are supported by the syndrome generator
with ISS:
* isv - Instruction syndrome valid
* sas - Syndrome access size
* sse - Syndrome sign extend
* srt - Syndrome register transfer
* sf - Sixty-Four bit register width
* ar - Acquire/Release
These flags are not yet used, so this patch has no functional change
except that we will now correctly set the IL bit in data abort
syndromes without ISS information.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1461931684-1867-5-git-send-email-edgar.iglesias@gmail.com>
[PMM: squashed in with patch which was just adding the IL bit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use tcg_set_insn_param() instead of directly accessing internal
tcg data structures to update an insn param.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1461931684-1867-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add tcg_set_insn_param as a mechanism to modify an insn
parameter after emiting the insn. This is useful for icount
and also for embedding fault information for a specific insn.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1461931684-1867-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a bug in ARM address translation regime with a long-descriptor
format. On the descriptor reading its address is formed from an index
which is a part of the input address. And on the first iteration this index
is incorrectly masked with 'grainsize' mask. But it can be wider according
to pseudo-code.
On the other hand on the iterations other than first the descriptor address
is formed from the previous level descriptor by masking with 'descaddrmask'
value. It always clears just 12 lower bits, but it must clear 'grainsize'
lower bits instead according to pseudo-code.
The patch fixes both cases.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1460996853-22117-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As described in AArch32.CheckS2Permission an instruction fetch fails if
XN bit is set or there is no read permission for the address.
Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
Message-id: 1461002400-3187-1-git-send-email-afarallax@yandex.ru
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
n8x0_init has a huge stack usage of 65536 bytes approx.
Moving large arrays to heap to reduce stack usage.
Signed-off-by: Zhou Jie <zhoujie2011@cn.fujitsu.com>
Message-id: 1461651308-894-1-git-send-email-zhoujie2011@cn.fujitsu.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the framebuffer settings are copied into the result message before it is
reconfigured, inconsistent behavior can happen when, for instance, you set with
a single message the width, height, and depth, and ask at the same time to
allocate the buffer and get the pitch and the size.
In this case, the reported pitch and size would be incorrect as they were
computed with the initial values of width, height and depth, not the ones the
client requested.
Signed-off-by: Sylvain Garrigues <sylvain@sylvaingarrigues.com>
Reviewed-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1461325343-24995-1-git-send-email-sylvain@sylvaingarrigues.com
[PMM: folded a couple of long lines]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Split the old SysBus init into an instance_init and a
DeviceClass::realize function
* Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Split the old SysBus init into an instance_init and a
DeviceClass::realize function
* Drop the old SysBus init function
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: corrected "can not" to "cannot" in error message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* Drop the old SysBus init function and use instance_init
* Split the exynos4210_irq_gate_init into an instance_init
and a DeviceClass::realize function
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the old SysBus init function and use instance_init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
surface_bits_per_pixel() always returns 32
so, removing other dead code which is
based on DEPTH !== 32
Signed-off-by: Pooja Dhannawat <dhannawatpooja1@gmail.com>
Message-id: 1459260142-9144-1-git-send-email-dhannawatpooja1@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Removing support for DEPTH != 32 from blizzard template header
and file that includes it, as macro DEPTH == 32 only used.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Pooja Dhannawat <dhannawatpooja1@gmail.com>
Message-id: 1458971873-2768-1-git-send-email-dhannawatpooja1@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Call vbe_update_vgaregs() when the guest touches GFX, SEQ or CRT
registers, to make sure the vga registers will always have the
values needed by vbe mode. This makes sure the sanity checks
applied by vbe_fixup_regs() are effective.
Without this guests can muck with shift_control, can turn on planar
vga modes or text mode emulation while VBE is active, making qemu
take code paths meant for CGA compatibility, but with the very
large display widths and heigts settable using VBE registers.
Which is good for one or another buffer overflow. Not that
critical as they typically read overflows happening somewhere
in the display code. So guests can DoS by crashing qemu with a
segfault, but it is probably not possible to break out of the VM.
Fixes: CVE-2016-3712
Reported-by: Zuozhi Fzz <zuozhi.fzz@alibaba-inc.com>
Reported-by: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Call the new vbe_update_vgaregs() function on vbe configuration
changes, to make sure vga registers are up-to-date.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When enabling vbe mode qemu will setup a bunch of vga registers to make
sure the vga emulation operates in correct mode for a linear
framebuffer. Move that code to a separate function so we can call it
from other places too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vga allows banked access to video memory using the window at 0xa00000
and it supports a different access modes with different address
calculations.
The VBE bochs extentions support banked access too, using the
VBE_DISPI_INDEX_BANK register. The code tries to take the different
address calculations into account and applies different limits to
VBE_DISPI_INDEX_BANK depending on the current access mode.
Which is probably effective in stopping misprogramming by accident.
But from a security point of view completely useless as an attacker
can easily change access modes after setting the bank register.
Drop the bogus check, add range checks to vga_mem_{readb,writeb}
instead.
Fixes: CVE-2016-3710
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes build failure with --enable-xfsctl and
new linux headers (>=4.5) and older xfsprogs(<4.5):
In file included from /usr/include/xfs/xfs.h:38:0,
from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:97:
/usr/include/xfs/xfs_fs.h:42:8: error: redefinition of ‘struct fsxattr’
struct fsxattr {
^
In file included from /var/tmp/portage/app-emulation/qemu-2.5.0-r1/work/qemu-2.5.0/block/raw-posix.c:60:0:
/usr/include/linux/fs.h:155:8: note: originally defined here
struct fsxattr {
This is really a bug in the system headers, but we can work around it
by defining HAVE_FSXATTR in the QEMU headers if linux/fs.h provides
the struct, so that xfs_fs.h doesn't try to define it as well.
CC: qemu-trivial@nongnu.org
CC: Markus Armbruster <armbru@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
CC: Stefan Weil <sw@weilnetz.de>
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Jan Vesely <jano.vesely@gmail.com>
[PMM: adjusted commit message, comments]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Minor, obvious fix only affecting BE hosts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXJfnwAAoJECgfDbjSjVRpUqgH/jzhrMSe4r6JizzltOPoQ1ET
5kLv8tsnmJS6VbtEboz2e/4UJZgOKAAkqZ1LV6C9mzxiSmffJWe5gXwCmMrrxdcD
PFyAJwvnEY6chLF7B4/GxzdP8w6qxBhdSh6QGbGrSPodl5VkuceC4ks3E7Te2p+r
6SBSBFeVPusaGz/n0F7AktrPgjS9Yyr2fFVpydC52mamwQXIYrSVHmPR6Ch6GTNt
Z+NbaLq1cId+F8w3CDcDRox8we6UcTMnngg49UZ8XJbv9T19ea3+L1V3fyb7tJ4T
15M4lOxwNsgKvoa66VUNLAitbiar1bioKNP48i/kdG2GP8P30KKXyMazWAJYJ1o=
=Jsvf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi: last minute fix for 2.6
Minor, obvious fix only affecting BE hosts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 01 May 2016 13:43:28 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi: fix bios linker loadder COMMAND_ALLOCATE on bigendian host
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
'make check' fails with:
ERROR:tests/bios-tables-test.c:493:load_expected_aml:
assertion failed: (g_file_test(aml_file, G_FILE_TEST_EXISTS))
since commit:
caf50c7166
tests: pc: acpi: drop not needed 'expected SSDT' blobs
Assert happens because qemu-system-x86_64 generates
SSDT table and test looks for a corresponding expected
table to compare with.
However there is no expected SSDT blob anymore, since
QEMU souldn't generate one. As it happens BIOS is not
able to read ACPI tables from QEMU and fallbacks to
embeded legacy ACPI codepath, which generates SSDT.
That happens due to wrongly sized endiannes conversion
which makes
uint8_t BiosLinkerLoaderEntry.alloc.zone
end up with 0 due to truncation of 32 bit integer
which on host is 1 or 2.
Fix it by dropping invalid cpu_to_le32() as uint8_t
doesn't require any conversion.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1330174
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Commit d5941dd documented that it leaves the default volume name as it
was ("QEMU VVFAT"), but it doesn't actually implement this. You get an
empty name (eleven space characters) instead.
This fixes the implementation to apply the advertised default.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit d5941dd made the volume name configurable, but it didn't consider
that the rw code compares the volume name string to assert that the
first directory entry is the volume name. This made vvfat crash in rw
mode.
This fixes the assertion to compare with the configured volume name
instead of a literal string.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Make sure the error message for visit_type_uint64() gracefully
handles a NULL 'name' when called from the top level or a list
context, as not all the world behaves like glibc in allowing
NULL through a printf-family %s.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1461879932-9020-21-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
On Darwin, connect, sendto and friends want the exact size of the sockaddr,
not more (and in particular, not sizeof(struct sockaddr_storaget))
This commit adds the sockaddr_size helper to be used when passing a sockaddr
size to such function, and makes use of it int sendto and connect calls.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This just has one, last-minute, fix for a serious regression of memory
hotplug.
Patch author's comment:
Really sorry for the way last-minute fix, but without this memory
hotplug is totally broken :( Hoping to get this in for Wednesday's
RC4, which I think will be the final before release.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zSL+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160426' into staging
ppc patch queue for 2016-04-26 (last minute qemu-2.6 fix)
This just has one, last-minute, fix for a serious regression of memory
hotplug.
Patch author's comment:
Really sorry for the way last-minute fix, but without this memory
hotplug is totally broken :( Hoping to get this in for Wednesday's
RC4, which I think will be the final before release.
# gpg: Signature made Tue 26 Apr 2016 03:52:20 BST using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-20160426:
spapr_drc: fix aborts during DRC-count based hotplug
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit b00c72180c ("target-mips: add PC, XNP reg numbers to RDHWR")
changed the rdhwr helpers to use check_hwrena() to check the register
being accessed is enabled in CP0_HWREna when used from user mode. If
that check fails an EXCP_RI exception is raised at the host PC
calculated with GETPC().
However check_hwrena() may not be fully inlined as the
do_raise_exception() part of it is common regardless of the arguments.
This causes GETPC() to calculate the address in the call in the helper
instead of the generated code calling the helper. No TB will be found
and the EPC reported with the resulting guest RI exception points to the
beginning of the TB instead of the RDHWR instruction.
We can't reliably force check_hwrena() to be inlined, and converting it
to a macro would be ugly, so instead pass the host PC in as an argument,
with each rdhwr helper passing GETPC(). This should avoid any dependence
on compiler behaviour, and in practice seems to ensure the full inlining
of check_hwrena() on x86_64.
This issue causes failures when running a MIPS KVM (trap & emulate)
guest in a MIPS QEMU TCG guest, as the inner guest kernel will do a
RDHWR of counter, which is disabled in the outer guest's CP0_HWREna by
KVM so it can emulate the inner guest's counter. The emulation fails and
the RI exception is passed to the inner guest.
Fixes: b00c72180c ("target-mips: add PC, XNP reg numbers to RDHWR")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Yongbok Kim <yongbok.kim@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
qemu_opts_foreach() runs its callback with the error location set to
the option's location. Any errors the callback reports use the
option's location automatically.
Commit 90998d5 moved the actual error reporting from "inside"
qemu_opts_foreach() to after it. Here's a typical hunk:
if (qemu_opts_foreach(qemu_find_opts("object"),
- object_create,
- object_create_initial, NULL)) {
+ user_creatable_add_opts_foreach,
+ object_create_initial, &err)) {
+ error_report_err(err);
exit(1);
}
Before, object_create() reports from within qemu_opts_foreach(), using
the option's location. Afterwards, we do it after
qemu_opts_foreach(), using whatever location happens to be current
there. Commonly a "none" location.
This is because Error objects don't have location information.
Problematic.
Reproducer:
$ qemu-system-x86_64 -nodefaults -display none -object secret,id=foo,foo=bar
qemu-system-x86_64: Property '.foo' not found
Note no location. This commit restores it:
qemu-system-x86_64: -object secret,id=foo,foo=bar: Property '.foo' not found
Note that the qemu_opts_foreach() bug just fixed could mask the bug
here: if the location it leaves dangling hasn't been clobbered, yet,
it's the correct one.
Reported-by: Eric Blake <eblake@redhat.com>
Cc: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1461767349-15329-4-git-send-email-armbru@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Paragraph on Error added to commit message]
Shannon Zhao