Allow certain event types to be rate limited to avoid flooding
monitor clients. The monitor_protocol_event() method is changed
such that instead of immediately emitting the event to Monitor
instances, it will call a new monitor_protocol_event_queue()
method.
This will check to see if the rate limit for the event has been
exceeded, and if so schedule a timer to wakeup at the end of the
rate limit period. If further events arrive before the timer fires,
the previously queued event will be discarded in favour of the new
event. The event will eventually be emitted when the timer fires.
This logic is applied to RTC_CHANGE, BALLOON_CHANGE & WATCHDOG
events, since the data associated with these events is stateless
* monitor.c: Add support for rate limiting
* monitor.h: Define monitor_global_init for one-time setup tasks
* vl.c: Invoke monitor_global_init
* trace-events: Add hooks for monitor event tracing
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add a separate EHCIPacket struct and move fields over from EHCIQueue.
Preparing for supporting multiple packets per queue being in flight at
the same time. No functional changes yet.
Fix some codestyle issues along the way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
uhci_process_frame() can be invoked multiple times per frame, so
accounting usb bandwith in a local variable doesn't fly, use a variable
in UHCIState instead. Also check the limit more frequently.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This allows using LUNs bigger than 2TB. Keep using READ10 for other
device types such as MMC.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
The resulting stp file fails to load because of an unresolvable probe.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch carries a complete rewrite of the usb descriptor parser.
Changes / improvements:
* We are using the USBDescriptor struct instead of hard-coded offsets
now to access descriptor data.
* (debug) printfs are all gone, tracepoints have been added instead.
* We don't try (and fail) to skip over unneeded descriptors. We parse
them all one by one. We keep track of which configuration, interface
and altsetting we are looking at and use this information to figure
which desciptors are in use and which we can ignore.
* On parse errors we clear all endpoint information, which will
disallow any communication with the device, except control endpoint
messages. This makes sure we don't end up with a silly device state
where half of the endpoints got enabled and the other half was left
disabled.
* Some sanity checks have been added.
The new parser is more robust and also leaves complete device
information in the trace log if you enable the ush_host_parse_*
tracepoints.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add pointer to USBPacket to all tracepoints tracking requests to make it
easier to identify them when multiple requests are in flight.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
dprint is still used for qxl_init_common one time prints.
also switched parts of spice-display.c over, mainly all the callbacks to
spice server.
All qxl device trace events start with the qxl device id.
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new function to check whenever the packet state is as expected,
log more informations in case it isn't.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reorganize usb source files. Create a new hw/usb/ directory and move
all usb source code to that place. Also make filenames a bit more
descriptive. Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-". Fixup paths Makefile and include
paths to make it compile. No code changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* kwolf/for-anthony:
test-coroutine: add performance test for nesting
coroutine: adding configure option for sigaltstack coroutine backend
coroutine: adding configure choose mechanism for coroutine backend
coroutine: adding sigaltstack method (.c source)
qcow2: Reduce number of I/O requests
qcow2: Add qcow2_alloc_clusters_at()
qcow2: Factor out count_cow_clusters
qmp: convert blockdev-snapshot-sync to a wrapper around transactions
add mode field to blockdev-snapshot-sync transaction item
rename blockdev-group-snapshot-sync
qapi: complete implementation of unions
use QSIMPLEQ_FOREACH_SAFE when freeing list elements
Add 'make check-block'
make check: Add qemu-iotests subset
qemu-iotests: Mark some tests as quick
qcow2: Add error messages in qcow2_truncate
block: handle -EBUSY in bdrv_commit_all()
qcow2: Add some tracing
qed: do not evict in-use L2 table cache entries
Group snapshot: Fix format name for backing file
If the first part of a write request is allocated, but the second isn't
and it can be allocated so that the resulting area is contiguous, handle
it at once. This is a common case for sequential writes.
After this patch, alloc_cluster_offset() only checks if the clusters are
already allocated or how many new clusters can be allocated contigouosly.
The actual cluster allocation is split off into a new function
do_alloc_cluster_offset().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Per-request attributes like read/write are currently implemented as bool
fields in the QEDAIOCB struct. This becomes unwiedly as the number of
attributes grows. For example, the qed_aio_setup() function would have
to take multiple bool arguments and at call sites it would be hard to
distinguish the meaning of each bool.
Instead use a flags field with bitmask constants. This will be used
when zero write support is added.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The ability to zero regions of an image file is a useful primitive for
higher-level features such as image streaming or zero write detection.
Image formats may support an optimized metadata representation instead
of writing zeroes into the image file. This allows zero writes to be
potentially faster than regular write operations and also preserve
sparseness of the image file.
The .bdrv_co_write_zeroes() interface should be implemented by block
drivers that wish to provide efficient zeroing.
Note that this operation is different from the discard operation, which
may leave the contents of the region indeterminate. That means
discarded blocks are not guaranteed to contain zeroes and may contain
junk data instead.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch implements the RX channel of GRLIB UART with a FIFO to
improve data rate.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
There already exists a virtio_blk_handle_write trace event as well as
completion events. Add the virtio_blk_handle_read event so it's easy to
trace virtio-blk requests for both read and write operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add the block_stream command, which starts copy backing file contents
into the image file. Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes. Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Previously copy-on-read could only be enabled for all requests to a
block device. This means requests coming from the guest as well as
QEMU's internal requests would perform copy-on-read when enabled.
For image streaming we want to support finer-grained behavior than just
populating the image file from its backing image. Image streaming
supports partial streaming where a common backing image is preserved.
In this case guest requests should not perform copy-on-read because they
would indiscriminately copy data which should be left in a backing image
from the backing chain.
Introduce a per-request flag for copy-on-read so that a block device can
process both regular and copy-on-read requests. Overlapping reads and
writes still need to be serialized for correctness when copy-on-read is
happening, so add an in-flight reference count to track this.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-kvm/uq/master:
kvm: Activate in-kernel irqchip support
kvm: x86: Add user space part for in-kernel IOAPIC
kvm: x86: Add user space part for in-kernel i8259
kvm: x86: Add user space part for in-kernel APIC
kvm: x86: Establish IRQ0 override control
kvm: Introduce core services for in-kernel irqchip support
memory: Introduce memory_region_init_reservation
ioapic: Factor out base class for KVM reuse
ioapic: Drop post-load irr initialization
i8259: Factor out base class for KVM reuse
i8259: Completely privatize PicState
apic: Open-code timer save/restore
apic: Factor out base class for KVM reuse
apic: Introduce apic_report_irq_delivered
apic: Inject external NMI events via LINT1
apic: Stop timer on reset
kvm: Move kvmclock into hw/kvm folder
msi: Generalize msix_supported to msi_supported
hyper-v: initialize Hyper-V CPUID leaves.
hyper-v: introduce Hyper-V support infrastructure.
Conflicts:
Makefile.target
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-kvm/memory/page_desc: (22 commits)
Remove cpu_get_physical_page_desc()
sparc: avoid cpu_get_physical_page_desc()
virtio-balloon: avoid cpu_get_physical_page_desc()
vhost: avoid cpu_get_physical_page_desc()
kvm: avoid cpu_get_physical_page_desc()
memory: remove CPUPhysMemoryClient
xen: convert to MemoryListener API
memory: temporarily add memory_region_get_ram_addr()
xen, vga: add API for registering the framebuffer
vhost: convert to MemoryListener API
kvm: convert to MemoryListener API
kvm: switch kvm slots to use host virtual address instead of ram_addr_t
memory: add API for observing updates to the physical memory map
memory: replace cpu_physical_sync_dirty_bitmap() with a memory API
framebuffer: drop use of cpu_physical_sync_dirty_bitmap()
loader: remove calls to cpu_get_physical_page_desc()
framebuffer: drop use of cpu_get_physical_page_desc()
memory: introduce memory_region_find()
memory: add memory_region_is_logging()
memory: add memory_region_is_rom()
...
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
bdrv_aio_readv
| bdrv_aio_writev
| bdrv_aio_flush
| bdrv_aio_discard
| bdrv_aio_ioctl
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Daniel P. Berrange