For the A64 instruction set, the semihosting call instruction
is 'HLT 0xf000'. Wire this up to call do_arm_semihosting()
if semihosting is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Christopher Covington <christopher.covington@linaro.org>
Tested-by: Christopher Covington <cov@codeaurora.org>
Message-id: 1439483745-28752-10-git-send-email-peter.maydell@linaro.org
As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base
and the macros GUEST_BASE and RESERVED_VA become useless: replace
them by their values.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.
Anyway, guest base use can be disabled lively by setting guest
base to 0.
CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
For the MIPS N64 ABI when QEMU reads the break/trap instruction so that
it can inspect the break/trap code it reads 8 rather than 4 bytes
which means it finds the code field from the instruction after the
break/trap instruction. This then causes the break/trap handling
code to fail because it does not understand the code number.
The fix forces QEMU to always read 4 bytes of instruction data rather
than deciding how much to read based on the ABI.
Signed-off-by: Andrew Bennett <andrew.bennett@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use
CPUState pointers and retrieving the env_ptr as minimally needed.
Scripted conversion for target-* change:
for I in target-*/cpu.h; do
sed -i \
's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \
$I;
done
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All callsites to this function navigate the cpu->env_ptr only for the
function to take the env ptr back to the original cpu ptr. Change the
function to just pass in the CPU pointer instead. Removes a core code
usage of ENV_GET_CPU() (in gdbstub.c).
Cc: Riku Voipio <riku.voipio@iki.fi>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
All of the core-code usages of this API have the cpu pointer handy so
pass it in. There are only 3 architecture specific usages (2 of which
are commented out) which can just use ENV_GET_CPU() locally to get the
cpu pointer. The reduces core code usage of the CPU env, which brings
us closer to common-obj'ing these core files.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
In qemu-linux-user, when calling gethostbyname2(),
it was hanging in .__res_nmkquery.
(gdb) bt
0 in .__res_nmkquery () from /lib64/libresolv.so.2
1 in .__libc_res_nquery () from /lib64/libresolv.so.2
2 in .__libc_res_nsearch () from /lib64/libresolv.so.2
3 in ._nss_dns_gethostbyname3_r () from /lib64/libnss_dns.so.2
4 in ._nss_dns_gethostbyname2_r () from /lib64/libnss_dns.so.2
5 in .gethostbyname2_r () from /lib64/libc.so.6
6 in .gethostbyname2 () from /lib64/libc.so.6
.__res_nmkquery() is:
...
do { RANDOM_BITS (randombits); } while ((randombits & 0xffff) == 0);
...
<.__res_nmkquery+112>: mftbl r11
<.__res_nmkquery+116>: clrlwi r10,r11,16
<.__res_nmkquery+120>: cmpwi cr7,r10,0
<.__res_nmkquery+124>: beq cr7,<.__res_nmkquery+112>
but as mftbl (Move From Time Base Lower) is not implemented,
r11 is always 0, so we have an infinite loop.
This patch fills the Time Base register with cpu_get_real_ticks().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Alexander Graf <agraf@suse.de>
When executing a 64bit target chroot on 64bit host,
the ioctl() command can mismatch.
It seems the previous commit doesn't solve the problem in
my case:
9c6bf9c7 linux-user: Fix ioctl cmd type mismatch on 64-bit targets
For example, a ppc64 chroot on an x86_64 host:
bash-4.3# ls
Unsupported ioctl: cmd=0x80087467
Unsupported ioctl: cmd=0x802c7415
The origin of the problem is in syscall.c:do_ioctl().
static abi_long do_ioctl(int fd, abi_long cmd, abi_long arg)
In this case (ppc64) abi_long is long (on the x86_64), and
cmd = 0x0000000080087467
then
if (ie->target_cmd == cmd)
target_cmd is int, so target_cmd = 0x80087467
and to compare an int with a long, the sign is extended to 64bit,
so the comparison is:
if (0xffffffff80087467 == 0x0000000080087467)
which doesn't match whereas it should.
This patch uses int in the case of the target command type
instead of abi_long.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When a thread is spawned, cpu_copy re-initializes
the bp & wp lists of current thread, instead of the ones
of the new thread.
The effect is that breakpoints are no longer hit.
Signed-off-by: Thierry Bultel <thierry.bultel@basystemes.fr>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The target payloads in cmsg conversions may not have the alignment
required by the host. Using the get_user and put_user functions is
the easiest way to handle this and also do the byte-swapping we
require.
(Note that prior to this commit target_to_host_cmsg was incorrectly
using __put_user() rather than __get_user() for the SCM_CREDENTIALS
conversion, which meant it wasn't getting the benefit of the
misalignment handling.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The previous code for handling payload length when converting
cmsg structures from host to target had a number of problems:
* we required the msg->msg_controllen to declare the buffer
to have enough space for final trailing padding (we were
checking against CMSG_SPACE), whereas the kernel does not
require this, and common userspace code assumes this. (In
particular, glibc's "try to talk to nscd" code that it will
run on startup will receive a cmsg with a 4 byte payload and
only allocate 4 bytes for it, which was causing us to do
the wrong thing on architectures that need 8-alignment.)
* we weren't correctly handling the fact that the SO_TIMESTAMP
payload may be larger for the target than the host
* we weren't marking the messages with MSG_CTRUNC when we did
need to truncate a message that wasn't truncated by the host,
but were instead logging a QEMU message; since truncation is
always the result of a guest giving us an insufficiently
sized buffer, we should report it to the guest as the kernel
does and don't log anything
Rewrite the parts of the function that deal with length to
fix these issues, and add a comment in target_to_host_cmsg
to explain why the overflow logging it does is a QEMU bug,
not a guest issue.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TARGET_ELF_PAGESTART is required to use abi_ulong to correctly handle
addresses for different target bits width.
This patch fixes a problem when running a 64-bit user mode application
on 32-bit host machines.
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We store all struct types in an array of static size without ever
checking whether we overrun it. Of course some day someone (like me
in another, ancient ALSA enabling patch set) will run into the limit
without realizing it.
So let's make the allocation dynamic. We already know the number of
structs that we want to allocate, so we only need to pass the variable
into the respective piece of code.
Also, to ensure we don't accidently overwrite random memory, add some
asserts to sanity check whether a thunk is actually part of our array.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Only exposing FPU and LLSC as the only features
supported by the translator.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove cpu_smm_register and cpu_smm_update. Instead, each CPU
address space gets an extra region which is an alias of
/machine/smram. This extra region is enabled or disabled
as the CPU enters/exits SMM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove them from the sundry exec-all.h header, since they are only used by
the TCG runtime in exec.c and user-exec.c.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide a routine to access the correct floating point register,
to simplify future expansion.
Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Misspelled system call name in macro was causing timerfd_create not
to be supported for the ARM target.
Signed-off-by: Timothy Edward Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function is a nop for user mode, so just remove them.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-Id: <1426496617-10702-3-git-send-email-famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If QEMU forks after the CPU threads have been created, qemu_mutex_lock_iothread
will not be able to do qemu_cpu_kick_thread. There is no solution other than
assuming that forks after the CPU threads have been created will end up in an
exec. Forks before the CPU threads have been created (such as -daemonize)
have to call rcu_after_fork manually.
Notably, the oxygen theme for GTK+ forks and shows a "No such process" error
without this patch.
This patch can be reverted once the iothread loses the "kick the TCG thread"
magic.
User-mode emulation does not use the iothread, so it can also call
rcu_after_fork.
Reported by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
New threads always point at the same env which is incorrect and usually
leads to a crash.
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The second and fourth argument are in/out parameters, store them back
after the syscall. Also, the fourth argument was mishandled, and EFAULT
handling was missing.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
start/end_exclusive() need be pairs, except the start_exclusive() in
stop_all_tasks() which is only used by force_sig(), which will be abort.
So at present, start_exclusive() in stop_all_task() need not be paired.
queue_signal() may call force_sig(), or return after kill pid (or queue
signal). If could return from queue_signal(), stop_all_task() would not
be called in time, the next end_exclusive() would be issue.
So in arm_kernel_cmpxchg64_helper() for ARM, need remove end_exclusive()
after queue_signal(). The related commit: "97cc756 linux-user: Implement
new ARM 64 bit cmpxchg kernel helper".
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When support was added for TrustZone to ARM CPU emulation, we failed
to correctly update the support for the linux-user implementation of
the get/set_tls syscalls. This meant that accesses to the TPIDRURO
register via the syscalls were always using the non-secure copy of
the register even if native MRC/MCR accesses were using the secure
register. This inconsistency caused most binaries to segfault on startup
if the CPU type was explicitly set to one of the TZ-enabled ones like
cortex-a15. (The default "any" CPU doesn't have TZ enabled and so is
not affected.)
Use access_secure_reg() to determine whether we should be using
the secure or the nonsecure copy of TPIDRURO when emulating these
syscalls.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Message-id: 1426505198-2411-1-git-send-email-m.ilin@samsung.com
[PMM: rewrote commit message to more clearly explain the issue
and its consequences.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit b8a173b25c, reversing
changes made to 5de090464f.
(I applied this pull request when I should not have done so, and
am now immediately reverting it.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This was the only caller of cpu_init() that was not checking for NULL
yet.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Simple "hello world" MIPS N32 userland program crashes with segfault due to
incorrectly defined stat structure in QEMU.
Correct "target_stat" definition to match kernel's "stat64" as in MIPS N32
there are only plain "stat" syscalls using 64-bit structure.
Reported-by: Daniel Sanders <daniel.sanders@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Tested-by: Daniel Sanders <daniel.sanders@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Fix TARGET_SI_PAD_SIZE calculation to match the way the kernel does it.
Use different TARGET_SI_PREAMBLE_SIZE for 32-bit and 64-bit targets.
Signed-off-by: Maxim Ostapenko <m.ostapenko@partner.samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In abi_long do_ioctl_dm(), after lock_user() call, the code does
not call unlock_user() before going to failure return in default case.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In main.c, all SIG* should be TARGET_SIG*, since the relevant functions
(queue_signal() and gdb_handlesig()) expect TARGET_SIG*.
The corresponding vi command is "1,$ s/\<SIG/TARGET_SIG/g".
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It is only a typo issue, need use tswapal(target_vec[i].iov_len) for the
len.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When failure occurs during locking of vec[i], we also need to unlock all
already locked vec[i] in failure processing code block before return.
Code in unlock_user() checks vec[i].iov_base for NULL, so there's no
need not check it .
If error is EFAULT when "i == 0", vec[i].iov_base is NULL, we can just
skip it, so can still use "while (--i >= 0)" loop condition.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When passing ancillary data through a unix socket, handle
credentials properly instead of doing a simple copy and
issuing a warning.
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The m68k signal frame setup code which writes the signal return
trampoline code to the stack was assuming that a 'long' was 32 bits;
on 64 bit systems this meant we would end up writing the 32 bit
(2 insn) trampoline sequence to retaddr+4,retaddr+6 instead of
the intended retaddr+0,retaddr+2, resulting in a guest crash when
it tried to execute the invalid zero-bytes at retaddr+0.
Fix by using uint32_t instead; also use uint16_t rather than short
for consistency. This fixes bug LP:1404690.
Reported-by: Michel Boaventura
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Without this fix, qemu segfaults when emulating the sigaltstack syscall,
because it incorrectly treats the ss_flags field as 64 bits rather than 32
bits.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
linux-user passes the cmd argument of the ioctl syscall as a signed long,
but compares it to an unsigned int when iterating through the ioctl_entries
list. When the cmd is a large value like 0x80047476 (TARGET_TIOCSWINSZ on
mips64) it gets sign-extended to 0xffffffff80047476, causing the comparison
to fail and resulting in lots of spurious "Unsupported ioctl" errors.
Changing the target_cmd field in the ioctl_entries list to a signed int
causes those values to be sign-extended as well during the comparison.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The resource argument is translated from host to target for
[gs]etprlimit but not for prlimit64. Fix this.
Signed-off-by: Felix Janda <felix.janda@posteo.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The function copy_siginfo_to_user() just calls tswap_siginfo(), so
call the latter function directly and delete the wrapper function.
The wrapper is actually misleading since it implies that the
semantics are like the kernel function with the same name which
copies the data to a guest user-space address. In fact tswap_siginfo()
just does data-structure conversion between two structures whose
addresses are host addresses (the copy to userspace is handled
in QEMU by the lock_user/unlock_user calls).
This also fixes clang complaints about the wrapper being unused
in some configs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The function end_exclusive() isn't used on all targets; mark it as
such to avoid a clang warning.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The start_exclusive() infrastructure is used on all target
architectures, even if only to do the "stop all CPUs before
dumping core" in force_sig(), so be consistent and call
cpu_exec_start/end in the main loop of every target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The aCC array in fpopcode.c is completely unused in QEMU; delete
it (silencing a clang warning).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For historical reasons, the define for the shmat() syscall on Alpha is
NR_osf_shmat; however it has the same semantics as this syscall does
on all other architectures, so define TARGET_NR_shmat as well so that
QEMU's code for the syscall is enabled.
This patch brings our behaviour on the LTP shmat tests into line
with that for ARM (still not a perfect pass rate but not "this syscall
is completely broken" as we had before).
(Problem detected via a clang warning that the do_shmat() function
was unused on Alpha.)
Cc: Richard Henderson <rth@twiddle.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Remove the function current_exec_domain_sig(), which always returns
its argument. This was intended as a stub for supporting the kernel's
exec_domain handling, but:
* we don't have any of the other code for execution domains
* in the kernel this handling is architecture-specific, not generic
* we only call this function in the x86, ppc and sh4 signal code paths,
and the PPC one is wrong anyway because the PPC kernel doesn't
have this signal-remapping code
So it's best to simply delete the function; any future attempt to
implement exec domains will be better served by adding the correct
code from scratch based on the kernel sources at that time.
This change also fixes some clang warnings about the function being
defined but not used for some target architectures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In the m68k cpu_loop() use get_user_u16 to read the immediate for
the simcall rahter than lduw, to bring it into line with how other
archs do it and to remove another user of the ldl family of functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-8-git-send-email-peter.maydell@linaro.org
Use the cpu_ld*_data and cpu_st*_data family of functions to access
guest memory in vm86.c rather than the very short-named ldl/stl functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1421334118-3287-7-git-send-email-peter.maydell@linaro.org
Peter Maydell