This may be used for deprecated object properties that are kept for
backwards compatibility.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Switch to use QNum/uint where appropriate to remove i64 limitation.
The input visitor will cast i64 input to u64 for compatibility
reasons (existing json QMP client already use negative i64 for large
u64, and expect an implicit cast in qemu).
Note: before the patch, uint64_t values above INT64_MAX are sent over
json QMP as negative values, e.g. UINT64_MAX is sent as -1. After the
patch, they are sent unmodified. Clearly a bug fix, but we have to
consider compatibility issues anyway. libvirt should cope fine,
because its parsing of unsigned integers accepts negative values
modulo 2^64. There's hope that other clients will, too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-12-marcandre.lureau@redhat.com>
[check_native_list() tweaked for consistency with signed case]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Before the previous commit, parameter promote_int = true made
visit_start_alternate() with an input visitor avoid QTYPE_QINT
variants and create QTYPE_QFLOAT variants instead. This was used
where QTYPE_QINT variants were invalid.
The previous commit fused QTYPE_QINT with QTYPE_QFLOAT, rendering
promote_int useless and unused.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170607163635.17635-8-marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We would like to use a same QObject type to represent numbers, whether
they are int, uint, or floats. Getters will allow some compatibility
between the various types if the number fits other representations.
Add a few more tests while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-7-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[parse_stats_intervals() simplified a bit, comment in
test_visitor_in_int_overflow() tidied up, suppress bogus warnings]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Use the more common pattern to error out.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170607163635.17635-6-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Say "SCSI except scsi-generic" instead of "scsi-disk", because
scsi-disk could mean either scsi-disk.c (which is correct) or device
model scsi-disk (which would be incorrect).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1494327362-30727-2-git-send-email-armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
In the process of getting rid of docs/qmp-commands.txt, we managed
to regress on some of the text that changed after the point where
the move was first branched and when the move actually occurred.
For example, commit 3282eca for blockdev-snapshot re-added the
extra "options" layer which had been cleaned up in commit 0153d2f.
This clears up all regressions identified over the range
02b351d..bd6092e:
https://lists.gnu.org/archive/html/qemu-devel/2017-05/msg05127.html
as well as a cleanup to x-blockdev-remove-medium to prefer
'id' over 'device' (matching the cleanup for 'eject').
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The QObject input visitor can produce only finite numbers when its
input comes out of the JSON parser, because the the JSON parser
implements RFC 7159, which provides no syntax for infinity and NaN.
However, it can produce infinity and NaN when its input comes out of
keyval_parse(), because we parse with strtod() then.
The keyval variant should not be able to express things the JSON
variant can't. Rejecting non-finite numbers there is the conservative
fix. It's also minimally invasive.
We could instead extend our JSON dialect to provide for infinity and
NaN. Not today.
Note that the JSON formatter can emit non-finite numbers (marked FIXME
in commit 6e8e5cb).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1495471335-23707-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Libvirt would like to be able to distinguish between a SHUTDOWN
event triggered solely by guest request and one triggered by a
SIGTERM or other action on the host. While qemu_kill_report() was
already able to give different output to stderr based on whether a
shutdown was triggered by a host signal (but NOT by a host UI event,
such as clicking the X on the window), that information was then
lost to management. The previous patches improved things to use an
enum throughout all callsites, so now we have something ready to
expose through QMP.
Note that for now, the decision was to expose ONLY a boolean,
rather than promoting ShutdownCause to a QAPI enum; this is because
libvirt has not expressed an interest in anything finer-grained.
We can still add additional details, in a backwards-compatible
manner, if a need later arises (if the addition happens before 2.10,
we can replace the bool with an enum; otherwise, the enum will have
to be in addition to the bool); this patch merely adds a helper
shutdown_caused_by_guest() to map the internal enum into the
external boolean.
Update expected iotest outputs to match the new data (complete
coverage of the affected tests is obtained by -raw, -qcow2, and -nbd).
Here is output from 'virsh qemu-monitor-event --loop' with the
patch installed:
event SHUTDOWN at 1492639680.731251 for domain fedora_13: {"guest":true}
event STOP at 1492639680.732116 for domain fedora_13: <null>
event SHUTDOWN at 1492639680.732830 for domain fedora_13: {"guest":false}
Note that libvirt runs qemu with -no-shutdown: the first SHUTDOWN event
was triggered by an action I took directly in the guest (shutdown -h),
at which point qemu stops the vcpus and waits for libvirt to do any
final cleanups; the second SHUTDOWN event is the result of libvirt
sending SIGTERM now that it has completed cleanup. Libvirt is already
smart enough to only feed the first qemu SHUTDOWN event to the end user
(remember, virsh qemu-monitor-event is a low-level debugging interface
that is explicitly unsupported by libvirt, so it sees things that normal
end users do not); changing qemu to emit SHUTDOWN only once is outside
the scope of this series.
See also https://bugzilla.redhat.com/1384007
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20170515214114.15442-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wJvl
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'dgilbert/tags/pull-hmp-20170517' into staging
HMP pull
# gpg: Signature made Wed 17 May 2017 07:03:39 PM BST
# gpg: using RSA key 0x0516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* dgilbert/tags/pull-hmp-20170517:
ramblock: add new hmp command "info ramblock"
utils: provide size_to_str()
ramblock: add RAMBLOCK_FOREACH()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Moving the algorithm from print_type_size() into size_to_str() so that
other component can also leverage it. With that, refactor
print_type_size().
The assert() in that logic is removed though, since even UINT64_MAX
would not overflow.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1494562661-9063-3-git-send-email-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Since cookies can contain sensitive data (session ID, etc ...) it is
desired to hide them from the prying eyes of users. Add a possibility to
pass them via the secret infrastructure.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1447413
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: f4a22cdebdd0bca6a13a43a2a6deead7f2ec4bb3.1493906281.git.pkrempa@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
Make it easier to simulate various unusual hardware setups (for
example, recent commits 3482b9b and b8d0a98 affect the Dell
Equallogic iSCSI with its 15M preferred and maximum unmap and
write zero sizing, or b2f95fe deals with the Linux loopback
block device having a max_transfer of 64k), by allowing blkdebug
to wrap any other device with further restrictions on various
alignments.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-9-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Making this option available even before implementing it will let
converting tests easier: in coming patches they can specify the option
already when necessary, before we actually write code to lock the
images.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPI_CLONE() returns a newly allocated QAPI object. Inconvenient when
we want to clone into an existing object. QAPI_CLONE_MEMBERS() does
exactly that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-4-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We now have macros in place to make it less verbose to add a scalar
to QDict and QList, so use them.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then touched up manually to fix a couple of '?:' back to original
spacing, as well as avoiding a long line in monitor.c.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-7-eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Source code for the qnio library that this code loads can be downloaded from:
https://github.com/VeritasHyperScale/libqnio.git
Sample command line using JSON syntax:
./x86_64-softmmu/qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0
-k en-us -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
-msg timestamp=on
'json:{"driver":"vxhs","vdisk-id":"c3e9095a-a5ee-4dce-afeb-2a59fb387410",
"server":{"host":"172.172.17.4","port":"9999"}}'
Sample command line using URI syntax:
qemu-img convert -f raw -O raw -n
/var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad
vxhs://192.168.0.1:9999/c6718f6b-0401-441d-a8c3-1f0064d75ee0
Sample command line using TLS credentials (run in secure mode):
./qemu-io --object
tls-creds-x509,id=tls0,dir=/etc/pki/qemu/vxhs,endpoint=client -c 'read
-v 66000 2.5k' 'json:{"server.host": "127.0.0.1", "server.port": "9999",
"vdisk-id": "/test.raw", "driver": "vxhs", "tls-creds":"tls0"}'
[Jeff: Modified trace-events with the correct string formatting]
Signed-off-by: Ashish Mittal <Ashish.Mittal@veritas.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Message-id: 1491277689-24949-2-git-send-email-Ashish.Mittal@veritas.com
Commit 831acdc "sheepdog: Implement bdrv_parse_filename()" and commit
d282f34 "sheepdog: Support blockdev-add" have different ideas on how
the QemuOpts parameters for the server address are named. Fix that.
While there, rename BlockdevOptionsSheepdog member addr to server, for
consistency with BlockdevOptionsSsh, BlockdevOptionsGluster,
BlockdevOptionsNbd.
Commit 831acdc's example becomes
--drive driver=sheepdog,server.type=inet,server.host=fido,server.port=7000,vdi=dolly
instead of
--drive driver=sheepdog,host=fido,vdi=dolly
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-id: 1490895797-29094-10-git-send-email-armbru@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
SocketAddress is a simple union, and simple unions are awkward: they
have their variant members wrapped in a "data" object on the wire, and
require additional indirections in C. I intend to limit its use to
existing external interfaces, and convert all internal interfaces to
SocketAddressFlat.
BlockdevOptionsNbd is an external interface using SocketAddress. We
already use SocketAddressFlat elsewhere in blockdev-add. Replace it
by SocketAddressFlat while we can (it's new in 2.9) for simplicity and
consistency. For example,
{ "execute": "blockdev-add",
"arguments": { "node-name": "foo", "driver": "nbd",
"server": { "type": "inet",
"data": { "host": "localhost",
"port": "12345" } } } }
becomes
{ "execute": "blockdev-add",
"arguments": { "node-name": "foo", "driver": "nbd",
"server": { "type": "inet",
"host": "localhost", "port": "12345" } } }
Since the internal interfaces still take SocketAddress, this requires
conversion function socket_address_crumple(). It'll go away when I
update the interfaces.
Unfortunately, SocketAddress is also visible in -drive since 2.8:
-drive if=none,driver=nbd,server.type=inet,server.data.host=127.0.0.1,server.data.port=12345
Nobody should be using it, as it's fairly new and has never been
documented, so adding still more compatibility gunk to keep it working
isn't worth the trouble. You now have to use
-drive if=none,driver=nbd,server.type=inet,server.host=127.0.0.1,server.port=12345
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1490895797-29094-9-git-send-email-armbru@redhat.com
[mreitz: Change iotest 147 accordingly]
Because of this interface change, iotest 147 has to be adapted.
Unfortunately, we cannot just flatten all of the addresses because
nbd-server-start still takes a plain SocketAddress. Therefore, we need
both and this is most easily achieved by writing the SocketAddress into
the code and flattening it where necessary.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170330221243.17333-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The curl block driver accepts more options than just "filename"; also,
the URL is actually expected to be passed through the "url" option
instead of "filename".
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170331120431.1767-2-mreitz@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This reverts a part of commit 8a47e8e. We're having second thoughts
on the QAPI schema (and thus the external interface), and haven't
reached consensus, yet. Issues include:
* BlockdevOptionsRbd member @password-secret isn't actually a
password, it's a key generated by Ceph.
* We're not sure where member @password-secret belongs (see the
previous commit).
* How @password-secret interacts with settings from a configuration
file specified with @conf is undocumented.
Let's avoid painting ourselves into a corner now, and revert the
feature for 2.9.
Note that users can still configure an authentication key with a
configuration file. They probably do that anyway if they use Ceph
outside QEMU as well.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-10-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
This reverts half of commit 0a55679. We're having second thoughts on
the QAPI schema (and thus the external interface), and haven't reached
consensus, yet. Issues include:
* The implementation uses deprecated rados_conf_set() key
"auth_supported". No biggie.
* The implementation makes -drive silently ignore invalid parameters
"auth" and "auth-supported.*.X" where X isn't "auth". Fixable (in
fact I'm going to fix similar bugs around parameter server), so
again no biggie.
* BlockdevOptionsRbd member @password-secret applies only to
authentication method cephx. Should it be a variant member of
RbdAuthMethod?
* BlockdevOptionsRbd member @user could apply to both methods cephx
and none, but I'm not sure it's actually used with none. If it
isn't, should it be a variant member of RbdAuthMethod?
* The client offers a *set* of authentication methods, not a list.
Should the methods be optional members of BlockdevOptionsRbd instead
of members of list @auth-supported? The latter begs the question
what multiple entries for the same method mean. Trivial question
now that RbdAuthMethod contains nothing but @type, but less so when
RbdAuthMethod acquires other members, such the ones discussed above.
* How BlockdevOptionsRbd member @auth-supported interacts with
settings from a configuration file specified with @conf is
undocumented. I suspect it's untested, too.
Let's avoid painting ourselves into a corner now, and revert the
feature for 2.9.
Note that users can still configure authentication methods with a
configuration file. They probably do that anyway if they use Ceph
outside QEMU as well.
Further note that this doesn't affect use of key "auth-supported" in
-drive file=rbd:...:key=value.
qemu_rbd_array_opts()'s parameter @type now must be RBD_MON_HOST,
which is silly. This will be cleaned up shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-9-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
We use InetSocketAddress in the QAPI schema. However, the code
doesn't use inet_connect_saddr(), but formats "host" and "port" into a
configuration string for rados_conf_set(). Thus, members "numeric",
"to", "ipv4" and "ipv6" are silently ignored. Not nice. Example:
-blockdev rbd,node-name=nn,pool=p,image=i,server.0.host=h0,server.0.port=12345,server.0.ipv4=off
Factor a suitable InetSocketAddressBase out of InetSocketAddress, and
use that. "numeric", "to", "ipv4" and "ipv6" are now rejected.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Message-id: 1490691368-32099-2-git-send-email-armbru@redhat.com
Signed-off-by: Jeff Cody <jcody@redhat.com>
It's been a long journey, but here we are.
The supported blockdev-add is not compatible to its experimental
predecessors; bump all Since: tags to 2.9.
x-blockdev-remove-medium, x-blockdev-insert-medium and
x-blockdev-change need a bit more work, so leave them alone for now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
An off-by-one in commit 15c2f669e meant that we were failing to
check for unparsed input in all QemuOpts visitors. Recent testsuite
additions show that fixing the obvious bug with bogus fields will
also fix the case of an incomplete list visit; update the tests to
match the new behavior.
Simple testcase:
./x86_64-softmmu/qemu-system-x86_64 -nodefaults -nographic -qmp stdio -numa node,size=1g
failed to diagnose that 'size' is not a valid argument to -numa, and
now once again reports:
qemu-system-x86_64: -numa node,size=1g: Invalid parameter 'size'
See also https://bugzilla.redhat.com/show_bug.cgi?id=1434666
CC: qemu-stable@nongnu.org
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20170322144525.18964-4-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Visiting a list when input is the empty string should result in an
empty list, not an error. Noticed when commit 3d089ce belatedly added
tests, but simply accepted as weird then. It's actually a regression:
broken in commit 74f24cb, v2.7.0. Fix it, and throw in another test
case for empty string.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1490026424-11330-2-git-send-email-armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This replaces manual references like "For the arguments, see the
documentation of ..." by a generated reference "Arguments: the members
of ...".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-25-git-send-email-armbru@redhat.com>
We traditionally mark optional members #optional in the doc comment.
Before commit 3313b61, this was entirely manual.
Commit 3313b61 added some automation because its qapi2texi.py relied
on #optional to determine whether a member is optional. This is no
longer the case since the previous commit: the only thing qapi2texi.py
still does with #optional is stripping it out. We still reject bogus
qapi-schema.json and six places for qga/qapi-schema.json.
Thus, you can't actually rely on #optional to see whether something is
optional. Yet we still make people add it manually. That's just
busy-work.
Drop the code to check, fix up and strip out #optional, along with all
instances of #optional. To keep it out, add code to reject it, to be
dropped again once the dust settles.
No change to generated documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1489582656-31133-18-git-send-email-armbru@redhat.com>
Talking about #optional like this
# Note: fields are marked #optional to indicate that they may or may
# not appear ...
doesn't work so well in generated documentation, because the #optional
tag is not visible there. Replace by
# Note: optional members may or may not appear ...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1489582656-31133-13-git-send-email-armbru@redhat.com>
The driver has failed to build since commit da34e65, in qemu 2.6,
due to a missing include of qapi/error.h for error_setg().
Since no one has complained in three releases, it is easier to
remove the dead code than to keep it around, especially since it
is not being built by default and therefore prone to bitrot.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Additionally permit non-negative integers as key components. A
dictionary's keys must either be all integers or none. If all keys
are integers, convert the dictionary to a list. The set of keys must
be [0,N].
Examples:
* list.1=goner,list.0=null,list.1=eins,list.2=zwei
is equivalent to JSON [ "null", "eins", "zwei" ]
* a.b.c=1,a.b.0=2
is inconsistent: a.b.c clashes with a.b.0
* list.0=null,list.2=eins,list.2=zwei
has a hole: list.1 is missing
Similar design flaw as for objects: there is no way to denote an empty
list. While interpreting "key absent" as empty list seems natural
(removing a list member from the input string works when there are
multiple ones, so why not when there's just one), it doesn't work:
"key absent" already means "optional list absent", which isn't the
same as "empty list present".
Update the keyval object visitor to use this a.0 syntax in error
messages rather than the usual a[0].
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488317230-26248-25-git-send-email-armbru@redhat.com>
[Off-by-one fix squashed in, as per Kevin's review]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Incorrect option
-blockdev node-name=foo,driver=file,filename=foo.img,aio.unmap=on
is rejected with "Invalid parameter type for 'aio', expected: string".
To make sense of this, you almost have to translate it into the
equivalent QMP command
{ "execute": "blockdev-add", "arguments": { "node-name": "foo", "driver": "file", "filename": "foo.img", "aio": { "unmap": true } } }
Improve the error message to "Parameters 'aio.*' are unexpected".
Take care not to confuse the case "unexpected nested parameters"
(i.e. the object is a QDict or QList) with the case "non-string scalar
parameter". The latter is a misuse of the visitor, and should perhaps
be an assertion. Note that test-qobject-input-visitor exercises this
misuse in test_visitor_in_int_keyval(), test_visitor_in_bool_keyval()
and test_visitor_in_number_keyval().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-23-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-19-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-8-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-7-git-send-email-armbru@redhat.com>
Currently the QObjectInputVisitor assumes that all scalar values are
directly represented as the final types declared by the thing being
visited. i.e. it assumes an 'int' is using QInt, and a 'bool' is using
QBool, etc. This is good when QObjectInputVisitor is fed a QObject
that came from a JSON document on the QMP monitor, as it will strictly
validate correctness.
To allow QObjectInputVisitor to be reused for visiting a QObject
originating from keyval_parse(), an alternative mode is needed where
all the scalars types are represented as QString and converted on the
fly to the final desired type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-8-git-send-email-berrange@redhat.com>
Rebased, conflicts resolved, commit message updated to refer to
keyval_parse(). autocast replaced by keyval in identifiers,
noautocast replaced by fail in tests.
Fix qobject_input_type_uint64_keyval() not to reject '-', for QemuOpts
compatibility: replace parse_uint_full() by open-coded
parse_option_number(). The next commit will add suitable tests.
Leave out the fancy ERANGE error reporting for now, but add a TODO
comment. Add it qobject_input_type_int64_keyval() and
qobject_input_type_number_keyval(), too.
Open code parse_option_bool() and parse_option_size() so we have to
call qobject_input_get_name() only when actually needed. Again, leave
out ERANGE error reporting for now.
QAPI/QMP downstream extension prefixes __RFQDN_ don't work, because
keyval_parse() splits them at '.'. This will be addressed later in
the series.
qobject_input_type_int64_keyval(), qobject_input_type_uint64_keyval(),
qobject_input_type_number_keyval() tweaked for style.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-5-git-send-email-armbru@redhat.com>
As its documentation says, it's not specific to Gluster. Rename it,
as I'm going to use it for something else.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488544368-30622-28-git-send-email-armbru@redhat.com>
Fix the design flaw demonstrated in the previous commit: new method
check_list() lets input visitors report that unvisited input remains
for a list, exactly like check_struct() lets them report that
unvisited input remains for a struct or union.
Implement the method for the qobject input visitor (straightforward),
and the string input visitor (less so, due to the magic list syntax
there). The opts visitor's list magic is even more impenetrable, and
all I can do there today is a stub with a FIXME comment. No worse
than before.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488544368-30622-26-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Greg Kurz