float*_is_zero_or_denormal() is available for float32, but not for
float64, floatx80 and float128. Fix that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now that softfloat-native is gone, there is no real point on not always
enabling floatx80 and float128 support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove softfloat-native support, all targets are now using softfloat
instead.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a new float_flag_output_denormal which is set when the result
of a floating point operation would be denormal but is flushed to
zero because we are in flush_to_zero mode. This is necessary because
some architectures signal this condition as an underflow and others
signal it as an inexact result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add float*_is_any_nan() functions to match the softfloat API.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
float*_scalbn() should be able to take a status parameter. Fix that.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
float*_scalnb() were not taking into account all cases. This patch fixes
some corner cases:
- NaN values in input were not properly propagated and the invalid flag
not correctly raised. Use propagateFloat*NaN() for that.
- NaN or infinite values in input of floatx80_scalnb() were not correctly
detected due to a typo.
- The sum of exponent and n could overflow, leading to strange results.
Additionally having int16 defined to int make that happening for a very
small range of values. Fix that by saturating n to the maximum exponent
range, and using an explicit wider type if needed.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add floatx80_compare() and floatx80_compare_quiet() functions to match
the softfloat-native ones.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a pi constant for float32, float64, floatx80. It will be used by
target-i386 and later by the trigonometric functions.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With floatx80, the explicit bit is set for infinity.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The floatx80 format uses an explicit bit that should be taken into account
when converting to and from commonNaN format.
When converting to commonNaN, the explicit bit should be removed if it is
a 1, and a default NaN should be used if it is 0.
When converting from commonNan, the explicit bit should be added.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make clear for all comparison functions which ones trigger an exception
for all NaNs, and which one only for sNaNs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
I am not a big fan of code moving, but having the signaling version in
the middle of quiet versions and vice versa doesn't make the code easy
to read.
This patch is a simple code move, basically swapping locations of
float*_eq and float*_eq_quiet.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
float*_eq_signaling functions have a different semantics than other
comparison functions. Fix that by renaming float*_quiet_signaling() into
float*_eq().
Note that it is purely mechanical, and the behaviour should be unchanged.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
float*_eq functions have a different semantics than other comparison
functions. Fix that by first renaming float*_quiet() into float*_eq_quiet().
Note that it is purely mechanical, and the behaviour should be unchanged.
That said it clearly highlight problems due to this different semantics,
they are fixed later in this patch series.
Cc: Alexander Graf <agraf@suse.de>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add float*_unordered_quiet() functions to march the softfloat versions.
As FPU status is not tracked with softfloat-native, they don't differ
from the signaling version.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add float*_unordered() functions to softfloat, matching the softfloat-native
ones. Also add float*_unordered_quiet() functions to match the others
comparison functions.
This allow target-i386/ops_sse.h to be compiled with softfloat.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Softfloat has its own implementation to count the leading zeros. However
a lot of architectures have either a dedicated instruction or an
optimized to do that. When using GCC >= 3.4, this patch uses GCC builtins
instead of the handcoded implementation.
Note that I amware that QEMU_GNUC_PREREQ is defined in osdep.h and that
clz32() and clz64() are defined in host-utils.h, but I think it is better
to keep the softfloat implementation self contained.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a setter function for the underflow tininess detection mode,
in line with the similar functions for other parts of the float status
structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add min and max operations to softfloat. This allows us to implement
propagation of NaNs and handling of negative zero correctly (unlike
the approach of having target helper routines return one of the operands
based on the result of a comparison op).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
They are defined with the same semantics as the POSIX types,
so prefer those for consistency. Suggested by Peter Maydell.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The original SoftFloat 2.0b library avoided the use of custom integer types
in its public headers. This requires the definitions of int{8,16,32,64} to
match the assumptions in the declarations. This breaks on BeOS R5 and Haiku/x86,
where int32 is defined in {be,os}/support/SupportDefs.h in terms of a long
rather than an int. Spotted by Michael Lotz.
Since QEMU already breaks this distinction by defining those types just above,
do use them for consistency and to allow #ifndef'ing them out as done for
[u]int16 on AIX.
Cc: Michael Lotz <mmlr@mlotz.ch>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The SoftFloat license requires "prominent notice that the work
is derivative". Having added features like improved 16-bit support
for arm already, add such a notice to the sources.
softfloat-native.[ch] are not under the SoftFloat license
and thus are not changed.
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These constants and utility function are needed to implement some
helpers. Defining constants avoids the need to re-compute them at
runtime.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These special values are needed to implement some helper functions,
which return/use these values in some cases.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make softfloat compile with USE_SOFTFLOAT_STRUCT_TYPES defined, by
adding and using new macros const_float16(), const_float32() and
const_float64() so you can use array initializers in an array of
float16/float32/float64 whether the types are bare or wrapped in the
structs.
[aurelien@aurel32.net: do the same for float16]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly handle NaNs in float16_to_float32(), by defining and
using a float16ToCommonNaN() function, as we do with the other formats.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix various bugs in the single-to-half-precision conversion code:
* input NaNs not correctly converted in IEEE mode
(fixed by defining and using a commonNaNToFloat16())
* wrong values returned when converting NaN/Inf into non-IEEE
half precision value
* wrong values returned for conversion of values which are
on the boundary between denormal and zero for the half
precision format
* zeroes not correctly identified
* excessively large results in non-IEEE mode should
generate InvalidOp, not Overflow
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Honour the default_nan_mode flag when doing conversions between
different floating point formats, as well as when returning a NaN from
a two-operand floating point function. This corrects the behaviour
of float<->double conversions on both ARM and SH4.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a float16 type to softfloat, rather than using bits16 directly.
Also add the missing functions float16_is_quiet_nan(),
float16_is_signaling_nan() and float16_maybe_silence_nan(),
which are needed for the float16 conversion routines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
floatx80_is_{quiet,signaling}_nan() functions are incorrectly detecting
the type of NaN, depending on SNAN_BIT_IS_ONE, one of the two is
returning the correct value, and the other true for any kind of NaN.
This patch fixes that by applying the same kind of comparison as for
other float formats, but taking into account the explicit bit.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a utility function to softfloat to test whether a float32
is zero or denormal.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When the default-NaN mode is enabled, it should return the default NaN
value, but it should anyway raise the invalid operation flag if one of
the operand is an sNaN.
I have checked that this behavior matches the ARM and SH4 manuals, as
well as real SH4 hardware.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement versions of float*_is_any_nan() for the floatx80 and
float128 types.
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Add support to softfloat for flushing input denormal float32 and float64
to zero. softfloat's existing 'flush_to_zero' flag only flushes denormals
to zero on output. Some CPUs need input denormals to be flushed before
processing as well. Implement this, using a new status flag to enable it
and a new exception status bit to indicate when it has happened. Existing
CPUs should be unaffected as there is no behaviour change unless the
mode is enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement the correct NaN propagation rules for PowerPC targets by
providing an appropriate pickNaN function.
Also fix the #ifdef tests for default NaN definition, the correct name
is TARGET_PPC instead of TARGET_POWERPC.
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement the correct NaN propagation rules for MIPS targets by
providing an appropriate pickNaN function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use float{32,64,x80,128}_maybe_silence_nan() instead of toggling the
sNaN bit manually. This allow per target implementation of sNaN to qNaN
conversion.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Add float{x80,128}_maybe_silence_nan() functions, they will be need by
propagateFloat{x80,128}NaN().
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On targets that define sNaN with the sNaN bit as one, simply clearing
this bit may correspond to an infinite value.
Convert it to a default NaN if SNAN_BIT_IS_ONE, as it corresponds to
the MIPS implementation, the only emulated CPU with SNAN_BIT_IS_ONE.
When other CPU of this type are added, this might be updated to include
more cases.
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Similarly to what has been done in commit
185698715d rename the misnamed *IsNaN
variables into *IsQuietNaN.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We don't have any HPPA target, so let's remove HPPA specific code. It
can be re-added when someone adds an HPPA target.
This has been blessed by Stuart Brady <sdb@zubnet.me.uk>, author of the
target-hppa fork.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement the correct NaN propagation rules for ARM targets by
providing an appropriate pickNaN function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
IEEE754 doesn't specify precisely what NaN should be returned as
the result of an operation on two input NaNs. This is therefore
target-specific. Abstract out the code in propagateFloat*NaN()
which was implementing the x87 propagation rules, so that it
can be easily replaced on a per-target basis.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The softfloat functions float*_is_nan() were badly misnamed,
because they return true only for quiet NaNs, not for all NaNs.
Rename them to float*_is_quiet_nan() to more accurately reflect
what they do.
This change was produced by:
perl -p -i -e 's/_is_nan/_is_quiet_nan/g' $(git grep -l is_nan)
(with the results manually checked.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The ARM architecture needs float/double to 16 bit integer conversions.
(The 32 bit versions aren't sufficient because of the requirement
to saturate at 16 bit MAXINT/MININT and to get the exception bits right.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Aurelien Jarno