As we want to add more flags to monitor commands, convert the only so
far existing one accordingly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This command was of minimal use before, now it is useless as the hpet
become a qdev device and is thus easily discoverable. We should
definitely not set query-hpet in QMP's stone, and there is also no good
reason to keep it for the interactive monitor.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
One of the most important missing feature in QMP today is its
supported commands documentation.
The plan is to make it part of self-description support, however
self-description is a big task we have been postponing for a
long time now and still don't know when it's going to be done.
In order not to compromise QMP adoption and make users' life easier,
this commit adds a simple text documentation which fully describes
all QMP supported commands.
This is not ideal for a number of reasons (harder to maintain,
text-only, etc) but does improve the current situation. To avoid at
least divering from the user monitor help and texi snippets, QMP bits
are also maintained inside qemu-monitor.hx, and hxtool is extended to
generate a single text file from them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Push the doc fragments for the info command to the end of
qemu-monitor.hx. This helps to establish a proper layout in the upcoming
QMP documentation.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The "info blockstats" documentation was copy-pasted as "info block"
instead of "info blockstats". The documentation for "commands", "jit",
"numa", "qdm", and "roms" is missing. This patch resolves these issues
in qemu-monitor.hx.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We don't want pci_del in QMP. Use device_del instead.
This reverts commit 6848d82716.
Conflicts:
hw/pci-hotplug.c
sysemu.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Short story: We don't want pci_add in QMP. Long story follows.
pci_add can do two things:
* Hot plug a PCI NIC. device_add is more general.
* Hot plug a PCI disk controller, and a drive connected to it.
The controller is either virtio-blk-pci (if=virtio) or lsi53c895a
(if=scsi). With the latter, the drive is optional. Use drive_add to
hotplug additional SCSI drives. Except drive_add is not available in
QMP.
device_add is more general for controllers and the guest part of
drives. I'm working on a more general alternative for the host part
of drives.
Why am I proposing to remove pci_add from QMP before its replacement is
ready? I want it out sooner rather than later, because it isn't fully
functional (errors and drive_add are missing), and we do not plan to
complete the job. In other words, it's not really usable over QMP now,
and it's not what we want for QMP anyway. Since we don't want it to be
used over QMP, we should take it out, not leave it around as a trap for
the uninitiated.
Dan Berrange confirmed that libvirt has no need for pci_add & friends
over QMP.
This reverts commit 7a344f7ac7.
Conflicts:
hw/pci-hotplug.c
sysemu.h
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Remove bogus entries "count", "format" and "size". Accidentally added
in commit 70fcbbe7.
Add missing entry "qmp_capabilities". Was forgotten in commit
4a7e1190.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 15dfcd45 added acl_add and acl_reset, but fat-fingered their
documentation to read acl_allow and acl_remove.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit f3546deb replaced host_net_redir by hostfwd_add,
hostfwd_remove, but neglected to update documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Trivial, as it never fails, doesn't have output nor return
any data.
Note that it's also available under QMP, as kvm-autotest
needs this.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Second argument is now "on" or "off" instead of "up" or "down".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
To make 'b' available for boolean argument.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Now that all handlers are converted to cmd_new_ret(), we can rename
it back to cmd_new(). But now it returns a value.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Not that trivial as the call chain also has to be modified.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that this function only fails in QMP, in the user Monitor
it prints the help text instead.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While there I'm also dropping a unneeded else clause (the last
one in the function).
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The following handlers always succeed and hence can be converted
to cmd_new_ret() in the same commit.
- do_stop()
- do_quit()
- do_system_reset()
- do_system_powerdown()
- do_migrate_cancel()
- do_qmp_capabilities()
- do_migrate_set_speed()
- do_migrate_set_downtime()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This command will be used to enable QMP capabilities advertised
by the capabilities array.
Note that it will be mandatory to issue this command in order
to make QMP functional (although this behavior is not being
enforced by this commit).
Also, as we don't have any capabilities yet, the new command
doesn't accept any arguments. I will postpone the decision for
a format for this until we get our first capability.
Finally, this command is visible from the user Monitor too, in
the meaning that you can execute it but it won't do anything.
Making it only visible in QMP is beyond this series' goal, as
it requires changes in unrelated places.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* Add monitor commands to function index.
* Fix description for acl_remove.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Before, it used type 's', which strips quotes and interprets escapes,
and is quite inappropriate for QMP.
Negative arguments are no flushed to zero. Before, they were cast to
uint32_t, which wrecked the sign.
Ridiculously large arguments including infinities are now rejected.
Before, they were interpreted as zero. Same for NaN.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Before, it used type 's', which strips quotes and interprets escapes,
and is quite inappropriate for QMP.
Negative arguments are no flushed to zero. Before, they were cast to
uint32_t, which wrecked the sign.
Ridiculously large arguments including infinities are now rejected.
Before, they were interpreted as zero. Same for NaN.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When using ballooning to manage overcommitted memory on a host, a system for
guests to communicate their memory usage to the host can provide information
that will minimize the impact of ballooning on the guests. The current method
employs a daemon running in each guest that communicates memory statistics to a
host daemon at a specified time interval. The host daemon aggregates this
information and inflates and/or deflates balloons according to the level of
host memory pressure. This approach is effective but overly complex since a
daemon must be installed inside each guest and coordinated to communicate with
the host. A simpler approach is to collect memory statistics in the virtio
balloon driver and communicate them directly to the hypervisor.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 3a4921047d.
From Luiz:
do_migrate_set_speed() accepts a suffix for the 'value' argument and this is
not good for QMP. We will have to add a new argument type to handle that and
this will have to wait for 0.13.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This makes do_balloon() accept megabyte values from the user
Monitor while accepting byte values for QMP.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Monitor's eject command uses 'filename' for the device name
argument, but 'device' is a better name.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Return a QDict with information about the just added device.
This commit should not change user output.
Please, note that this patch does not do error handling
conversion. In error conditions the handler still calls
monitor_printf().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When using encrypted disk images, QEMU will prompt the user
for passwords when started.
This makes sense for the user protocol, but doesn't for QMP.
The solution is to have Monitor command which allows the user
or a Client to set passwords in advance, so that we avoid
the prompt completely.
This is what block_passwd does, for example:
(QEMU) block_passwd ide0-hd0 foobar
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the option to activate non-shared storage migration from the
monitor.
The migration command is as follows:
(qemu) migrate -d tcp:0:4444 # for ordinary live migration
(qemu) migrate -d -b tcp:0:4444 # for live migration with complete storage copy
(qemu) migrate -d -i tcp:0:4444 # for live migration with incremental storage copy, storage is cow based.
Changes from v4:
- Minor coding style issues.
Signed-off-by: Liran Schour <lirans@il.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jan Kiszka