Old size: 8 MB (traditional upstream qemu value).
New size: 16 MB (traditional qemu-kvm value).
Also adds compat properties so old machine types
keep the old default values.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In preperation for supporting a larger framebuffer for multiple monitors
on a single card, add a property to qxl vgamem_size_mb, and corresponding
byte sized vgamem_size, and use instead of VGA_RAM_SIZE.
[ kraxel: simplify property handling, add sanity checks ]
[ kraxel: fix mode copying ]
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Zap the global VGA_RAM_SIZE #define, make the vga ram size configurable
for standard vga and vmware vga. cirrus and qxl are left with a fixed
size (and private VGA_RAM_SIZE #define) for now.
qxl needs some non-trivial adjustments in the mode list handling deal
with a runtime-configurable size, which calls for a separate qxl patch.
cirrus emulates cards which have 2 MB (isa) and 4 MB (pci), so I guess
it would make sense to use these sizes. That change would break
migration though, so I left it fixed at 8 MB size. Making it
configurabls is pretty pointless for cirrus as we have to match real
hardware.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
soft_reset is called from any of:
* QXL_IO_RESET
* vga io
* pci reset handler
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested with linux guest. Not sure how to check actual performance affect
of this. Checked with the previously send traceevent that the kvm ioctl
to start/stop dirty logging is being called.
(KVM_SET_USER_MEMORY_REGION).
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
val is an uint64_t, therefore %d was not correct.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The addition of those values caused a regression where not specifying
any value for the vram bar size would result in a 4096 _byte_ surface
area. This is ok for the windows driver but causes the X driver to be
unusable. Also, it's a regression. This patch returns the default
behavior of having a 64 megabyte vram BAR.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix compilation failures on 32 bit hosts (cast from pointer to
integer of different size; %ld expects 'long int' not uint64_t).
Reported-by: Steve Langasek <steve.langasek@canonical.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
dprint is still used for qxl_init_common one time prints.
also switched parts of spice-display.c over, mainly all the callbacks to
spice server.
All qxl device trace events start with the qxl device id.
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If pipe creation fails, exit, don't log and continue. Fix indentation at
the same time.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds an 64bit pci bar for vram. It is turned off by default.
It can be enabled by setting the size of the 64bit bar to be larger than
the 32bit bar. Both 32bit and 64bit bar refer to the same memory. Only
the first part of the memory is available via 32bit bar.
The intention is to allow large vram sizes for 64bit guests, by allowing
the vram bar being mapped above 4G, so we don't have to squeeze it into
the pci I/O window below 4G.
With vram_size_mb=16 and vram64_size_mb=256 it looks like this:
00:02.0 VGA compatible controller: Red Hat, Inc. Device 0100 (rev 02) (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc Device 1100
Physical Slot: 2
Flags: fast devsel, IRQ 10
Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Memory at fd020000 (32-bit, non-prefetchable) [size=8K]
I/O ports at c5a0 [size=32]
Memory at ffe0000000 (64-bit, prefetchable) [size=256M]
Expansion ROM at fd000000 [disabled] [size=64K]
[ mapping above 4G needs patched seabios:
http://www.kraxel.org/cgit/seabios/commit/?h=pci64 ]
RHBZ# 747011
Removes the last user of QXL_SYNC when using update drivers that use the
_ASYNC io ports.
The last user is qxl_render_update, it is called both by qxl_hw_update
which is the vga_hw_update_ptr passed to graphic_console_init, and by
qxl_hw_screen_dump.
At the same time the QXLRect area being passed to the red_worker thread
is passed as a copy, as part of the QXLCookie.
The implementation uses interface_update_area_complete with a bh to make
sure dpy_update and qxl_flip are called from the io thread, otherwise
the vga->ds->surface.data can change under our feet.
With this patch sdl+spice works fine. But spice by itself doesn't
produce the expected screendumps unless repeated a few times, due to
ppm_save being called before update_area (rendering done in spice server
thread) having a chance to complete. Fixed by next patch, but see commit
message for problem introduced by it.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
drop all ifdefs on SPICE_INTERFACE_QXL_MINOR >= 1 as a result,
any check for SPICE_SERVER_VERSION that is now always satisfied,
and SPICE_INTERFACE_CORE_MINOR >= 3 tests, because
0.8.2 has SPICE_INTERFACE_QXL_MINOR == 1 and
SPICE_INTERFACE_CORE_MINOR == 3.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
switch console only if needed, also pass down whenever the console was
switched or not because a displaysurface redraw is only needed in case
the console was switched.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add two properties to specify bar sizes in megabytes instead of bytes,
which is alot more user-friendly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no reason to require a minimum size of 16 MB for the vram.
Lower the limit to 4096 (one page). Make it disapper completely would
break guests.
We used to assure the guest surfaces were saved before migration by
setting the whole vram dirty. This patch sets dirty only the areas
that are actually used in the vram.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These are various small stylistic changes which help make things more
consistent such that the automated conversion script can be simpler.
It's not necessary to agree or disagree with these style changes because all
of this code is going to be rewritten by the patch monkey script anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of each target knowing or guessing the guest page size,
just pass the desired size of dirtied memory area.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Currently creating a memory region automatically registers it for
live migration. This differs from other state (which is enumerated
in a VMStateDescription structure) and ties the live migration code
into the memory core.
Decouple the two by introducing a separate API, vmstate_register_ram(),
for registering a RAM block for migration. Currently the same
implementation is reused, but later it can be moved into a separate list,
and registrations can be moved to VMStateDescription blocks.
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit 0a039dc700 broke vga modes for
qxl-vga by loosing vga_ioport_read windup. qxl needs to hook into
vga port writes only and used to realize that by letting vga_init() do
the work for both reads and writes, then overwrite the write function.
That little detail was missed while doing the conversion ...
This patch fixes it. It also switch qxl vga ioport registration to
portio lists while being at it.
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
RHBZ 740547
If we migrate when the device is in vga state the guest
still believes the slots are created, and will cause operations
that reference the slots, causing a "panic: virtual address out of range"
on the first of them. Easy to see by migrating in vga mode with
a driver loaded, for instance windows cmd window in full screen mode,
and then exiting vga mode back to native mode will cause said panic.
Fixed by doing the slot recreation in post_load for vga mode as well.
Note that compat does not require any changes because it creates it's
only slot by a side effect of QXL_IO_SET_MODE.
Signed-off-by: Alon Levy <alevy@redhat.com>
update init_qxl_ram to reset update_surface to 0. This fixes one case
of breakage when installing an old driver in a vm that had a new driver
installed. The newer driver would know about surface creation and would
change update_surface to !=0, then a reset would happen, all surfaces
are destroyed, then the old driver is initialized and issues an
UPDATE_AREA, and spice server aborts on invalid surface.
RHBZ: 690427
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(1) If the guest cursor command is empty, don't reload it after migration.
(2) Cleaning the guest cursor when it is released by
the spice server. In addition, explicitly reset the
cursor in spice upon destroying the primary surface
(was done by spice-server implicitly). This will prevent
access to pci memory that was released.
RHBZ: 744518
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Alon Levy