Commit Graph

4264 Commits

Author SHA1 Message Date
Michael S. Tsirkin 513691b7ff pci/aer: factor out common code
Same logic is used to assert interrupts
and send msix messages, so add a static functin for this.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09 12:48:31 +02:00
Michael S. Tsirkin 5f47c187d9 pci/aer: remove dead code
Remove some unused variables and return values.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2010-12-09 12:48:29 +02:00
Michael S. Tsirkin 2b3cb353e7 pci/aer: fix interrupt on config write
config write handling for aer seems broken:
For example, it won't clear a level interrupt
when command register is set to 0.

Make it match the spec: level should equal
the logical or of enabled bits, msi only
be sent when the logical or changes.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2010-12-09 12:48:27 +02:00
Michael S. Tsirkin c3f33667a6 pci/aer: fix error injection
Fix the injection logic upon aer message to follow 6.2.4.1.2 more
closely: specifically only send an msi interrupt when the logical or of
the enabled bits changed, not when a bit which was previously clear
becomes set.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2010-12-09 12:48:26 +02:00
Michael S. Tsirkin 4a9dd66582 pci: untangle pci/msi dependency
msi depends on pci but pci should not depend on msi.
The only dependency we have is a recent addition
of pci_msi_ functions, IMO they add little enough to
open-code in the small number of users.

Follow-up patches add more cleanups.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2010-12-09 12:48:18 +02:00
Isaku Yamahata b1aeb92666 pci: make command SERR bit writable
pcie aer needs SERR bit to be writable, and the PCI spec requires
this as well.  For compatibility, introduce compat global property
command_serr_enable and make this bit readonly for a pre 0.14 pc
machine.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09 12:47:48 +02:00
Michael S. Tsirkin 783e770693 virtio-net: stop/start bh when appropriate
Avoid sending out packets, and modifying
memory, when VM is stopped.
Add assert statements to verify this does not happen.

Avoid scheduling bh when vhost-net is started.

Stop bh when driver disabled bus mastering
(we must not access memory after this).

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
2010-12-09 12:47:48 +02:00
Michael S. Tsirkin 9547732304 virtio-net: don't dma while vm is stopped
DMA into memory while VM is stopped makes it
hard to debug migration (consequitive saves
result in different files).
Fixing this completely is a large effort,
this patch does this for virtio-net.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
2010-12-09 12:47:48 +02:00
Blue Swirl e6e055c9d7 Fix mingw32 and OpenBSD warnings
ffsl() is not universally available, so there are these warnings
on both mingw32 and OpenBSD:
/src/qemu/hw/pcie_aer.c: In function 'pcie_aer_update_log':
/src/qemu/hw/pcie_aer.c:399: warning: implicit declaration of function 'ffsl'

Since status field in PCIEAERErr is uint32_t, we can just use ffs() instead.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-04 18:36:22 +00:00
Hidetoshi Seto 3867142346 virtio-9p: fix build on !CONFIG_UTIMENSAT
This patch introduce a fallback mechanism for old systems that do not
support utimensat().  This fix build failure with following warnings:

hw/virtio-9p-local.c: In function 'local_utimensat':
hw/virtio-9p-local.c:479: warning: implicit declaration of function 'utimensat'
hw/virtio-9p-local.c:479: warning: nested extern declaration of 'utimensat'

and:

hw/virtio-9p.c: In function 'v9fs_setattr_post_chmod':
hw/virtio-9p.c:1410: error: 'UTIME_NOW' undeclared (first use in this function)
hw/virtio-9p.c:1410: error: (Each undeclared identifier is reported only once
hw/virtio-9p.c:1410: error: for each function it appears in.)
hw/virtio-9p.c:1413: error: 'UTIME_OMIT' undeclared (first use in this function)
hw/virtio-9p.c: In function 'v9fs_wstat_post_chmod':
hw/virtio-9p.c:2905: error: 'UTIME_OMIT' undeclared (first use in this function)

[NOTE: At this time virtio-9p is only user of utimensat(), and is available
       only when host is linux and CONFIG_VIRTFS is defined.  So there are
       no similar warning for win32.  Please provide a wrapper for win32 in
       oslib-win32.c if new user really requires it.]

v5:
  - Allow fallback on runtime
  - Move qemu_utimensat() to oslib-posix.c
  - Rebased on latest qemu.git
v4:
  - Use tv_now.tv_usec
v3:
  - Use better alternative handling for UTIME_NOW/OMIT
  - Move qemu_utimensat() to cutils.c
V2:
  - Introduce qemu_utimensat()

Acked-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: M. Mohan Kumar <mohan@in.ibm.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-12-02 16:08:40 -08:00
Kusanagi Kouichi 0562c67432 virtio-9p: Check the return value of llistxattr.
If llistxattr returned 0, qemu aborts.

Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-12-02 16:08:27 -08:00
Harsh Prateek Bora d04e2826f5 hw/virtio9p: Use appropriate debug print functions in TLINK path
Running fsstress with debug enabled causes assertion failure
because of inappropriate usage of debug print functions.
With this patch, fsstress passes without assertion failure.

Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-12-02 16:07:49 -08:00
Venkateswararao Jujjuri (JV) 49594973fb [virtio-9p] Add datasync to server side TFSYNC/RFSYNC for dotl
SYNOPSIS
    size[4] Tfsync tag[2] fid[4] datasync[4]

    size[4] Rfsync tag[2]

DESCRIPTION

    The Tfsync transaction transfers ("flushes") all modified in-core data of
    file identified by fid to the disk device (or other  permanent  storage
    device)  where that  file  resides.

    If datasync flag is specified data will be fleshed but does not flush
    modified metadata unless  that  metadata  is  needed  in order to allow a
    subsequent data retrieval to be correctly handled.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-12-02 16:06:47 -08:00
Jason Wang 0c600ce2a7 vhost: Fix address calculation in vhost_dev_sync_region()
We still need advance address even we find there's no dirty pages in
current chunk.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-02 21:13:39 +02:00
Michael S. Tsirkin 3d002df33e migration: allow rate > 4g
I'd like to disable bandwidth limit or make it very high,
Use int64_t all over to make values >= 4g work.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Jason Wang <jasowang@redhat.com>
2010-12-02 21:13:39 +02:00
Michael S. Tsirkin c924f36a30 Merge remote branch 'origin/master' into pci
Conflicts:
	Makefile.objs
	hw/virtio.c
2010-12-01 07:11:51 +02:00
Anthony Liguori 09fa35e5cd Merge remote branch 'kwolf/for-anthony' into staging 2010-11-30 15:25:34 -06:00
Kevin Wolf b76876e602 ide: Reset current_addr after stopping DMA
Whenever SSBM is reset in the command register all state information is lost.
Restarting DMA means that current_addr must be reset to the base address of the
PRD table. The OS is not required to change the base address register before
starting a DMA operation, it can reuse the value it wrote for an earlier
request.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-29 16:15:04 +01:00
Kevin Wolf c29947bbb0 ide: Ignore double DMA transfer starts/stops
You can only start a DMA transfer if it's not running yet, and you can only
cancel it if it's running.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-29 16:15:02 +01:00
Kevin Wolf e3982b3cf6 ide: Set bus master inactive on error
BMIDEA in the status register must be cleared on error. This makes FreeBSD
respond (more) correctly to I/O errors.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-29 16:15:01 +01:00
Kevin Wolf 8337606d35 ide: Factor ide_dma_set_inactive out
Several places that stop a DMA transfer duplicate this code. Factor it out into
a common function.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-29 16:15:01 +01:00
Paul Brook 661a1799ba Add pcnet-pci.c
Add file missing from last commit.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 11:56:02 +00:00
Paul Brook a4c75a21f3 Split out common pcnet code
The core pcnet emulation code is used by both the PCI "pcnet" device
and the SPARC "lance" device.  Split the common code frm the PCI code so
that that can be configures independantly.

Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-11-27 11:23:34 +00:00
Hannes Reinecke 2dd791b630 scsi-disk: Remove duplicate cdb parsing
We parse the CDB twice, which is completely unnecessary.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-25 12:51:50 +01:00
Hannes Reinecke a6d96eb78b scsi: Move sense handling into the driver
The current sense handling in scsi-bus is only used by the
scsi-disk driver; the scsi-generic driver is using its own.
So we should move the current sense handling into the
scsi-disk driver.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-25 12:19:28 +01:00
Hannes Reinecke 39d989823f scsi: INQUIRY VPD fixes
We should announce and support the block device characterics page
only on block devices, not on CDROMs. And the VPD page 0x83 has
an off-by-one error.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-25 12:15:23 +01:00
Hannes Reinecke f017132793 scsi: Return SAM status codes
Traditionally, the linux stack is using SCSI status codes
which are shifted by one as compared to those defined in SAM.
A SCSI emulation should naturally return the SAM defined codes,
not the linux ones.
So to avoid any confusion this patch modifies the existing
definitions to match those found in SAM and removes any
(now obsolete) byte-shift from the returned status codes.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-25 12:00:10 +01:00
Hannes Reinecke 622b520fb4 scsi: Increase the number of possible devices
The SCSI parallel interface has a limit of 8 devices, but
not the SCSI stack in general. So we should be removing the
hard-coded limit and use MAX_SCSI_DEVS instead.
And we only need to scan those devices which are allocated
by the bus.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-25 11:57:32 +01:00
Stefano Stabellini 5cbdebe39e qemu and qemu-xen: support empty write barriers in xen_disk
This patch can be applied to both qemu-xen and qemu and adds support
for empty write barriers to xen_disk.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-24 17:31:06 +01:00
Avi Kivity 9fbef1ac7c ide: convert bmdma address ioport to ioport_register()
cmd646, via compile tested, pci lightly boot tested.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-24 17:31:06 +01:00
Stefan Hajnoczi 6fa2c95f27 scsi-disk: Move active request asserts
SCSI read/write requests should not be re-issued before the current
fragment of I/O completes.  There are asserts in scsi-disk.c that guard
this constraint but they trigger on SPARC Linux 2.4.  It turns out that
the asserts are too early in the code path and don't allow for read
requests to terminate.

Only the read assert needs to be moved but move the write assert too for
consistency.

Reported-by: Nigel Horne <njh@bandsman.co.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-24 17:30:19 +01:00
Michael S. Tsirkin 1abeb5a65d virtio: fix up VQ checks
When migration triggers before a VQ is initialized,
base pa is 0 and last_used_index must be 0 too:
we don't have a ring to compare to.

Reported-by: Juan Quintela <quintela@redhat.com>
Tested-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-24 17:25:44 +02:00
Stefan Hajnoczi ce67ed6500 virtio: Convert fprintf() to error_report()
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
(cherry picked from commit cd92f4cc22)
2010-11-24 17:25:35 +02:00
Michael S. Tsirkin 929176c3b9 pci: fix bus walk under secondary bus reset
Take into account secondary bus reset bit for
bus walk: devices behind a reset bus should not
respond to configuration cycles.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-24 17:04:59 +02:00
Isaku Yamahata a5fce077b1 pci bridge: implement secondary bus reset
Trigger secondary bus reset when secondary bus reset bit
value changes from 0 to 1.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:07 +02:00
Isaku Yamahata 9bb3358627 pci: use qdev reset framework for pci bus reset
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:07 +02:00
Isaku Yamahata 5af0a04bea qdev: trigger reset from a given device
Introduce a helper function which triggers reset from a given device.
Will be used by pci bus emulation.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:07 +02:00
Isaku Yamahata b4694b7ce8 qdev: introduce reset call back for qbus level
and make it called via qbus_reset_all().
The qbus reset callback will be used by pci bus reset.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:07 +02:00
Anthony Liguori ec990eb622 qdev: reset qdev along with qdev tree
This patch changes the reset handling so that qdev has no knowledge of the
global system reset.  Instead, a new bus/device level function is introduced
that allows all devices/buses on the bus/device to be reset using a depth
first transversal.

N.B. we have to expose the implicit system bus because we have various hacks
that result in an implicit system bus existing.  Instead, we ought to have an
explicitly created system bus that we can trigger reset from.  That's a topic
for a future patch though.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:07 +02:00
Anthony Liguori 81699d8a90 qbus: add functions to walk both devices and busses
There are some cases where you want to walk the busses, in particular, when
searching for a bus either by name or DeviceInfo.
Paolo suggested that we model the return values on how GCC's walkers work which
allows an actor to skip child transversal, or terminate walking with a positive
value that's returned as the qbus_walk_children's result.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:07 +02:00
Stefan Weil 0389ced419 eepro100: Use a single rom file for all i825xx devices
Patching the rom data during load (in qemu) now
also supports i82801 (which had no rom file).

We only need a single rom file for the whole device family,
so remove the second one which is no longer needed.

Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:07 +02:00
Stefan Weil ab85ceb1ad pci: Automatically patch PCI vendor id and device id in PCI ROM
PCI devices with different vendor or device ids sometimes share
the same rom code. Only the ids and the checksum
differs in a boot rom for such devices.

The i825xx ethernet controller family is a typical example
which is implemented in hw/eepro100.c. It uses at least
3 different device ids, so normally 3 boot roms would be needed.

By automatically patching vendor id and device id (and the checksum)
in qemu, all emulated family members can share the same boot rom.

VGA bios roms are another example with different vendor and device ids.

Only qemu's built-in default rom files will be patched.

v2:
    * Patch also the vendor id (and remove the sanity check for vendor id).

v3:
    * Don't patch a rom file when its name was set by the user.
      Thus we avoid modifications of unknown rom data.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:07 +02:00
Stefan Weil b90c73cf47 pci: Replace unneeded type casts in calls of pci_register_bar
There is no need for these type casts (as other existing
code shows). So re-write the first argument without
type cast (and remove a related TODO comment).

Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:06 +02:00
Isaku Yamahata bba5ed772a pcie/port: fix bridge control register wmask
pci generic layer initialized wmask for bridge control register
according to pci spec. pcie deviates slightly from it,
so initialize it properly.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:06 +02:00
Michael S. Tsirkin f6bdfcc935 pci: fix bridge control bit wmask
Bits 12 to 15 in bridge control register are reserver and must be
read-only zero, curent mask is 0xffff which makes them writeable. Fix
this up by using symbolic bit names for writeable bits instead of a
hardcoded constant.

Fix a comment w1mask -> w1cmask as well.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:06 +02:00
Isaku Yamahata 09b926d446 x3130/downstream: support aer.
add aer support.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:06 +02:00
Isaku Yamahata a158f92fa7 x3130/upstream: support aer
add aer support.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:06 +02:00
Isaku Yamahata 61620c2fff ioh3420: support aer
Add aer support.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:06 +02:00
Michael S. Tsirkin d33d9156fd pcie_aer: complete unwinding recursion
Open-code functions created in the previous patch,
to make code more compact and clear.
Detcted and documented what looks like a bug in code
that becomes apparent from this refactoring.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:06 +02:00
Michael S. Tsirkin 247c97f3f5 pcie_aer: get rid of recursion
Added some TODOs: they are trivial but omitted here
to make the patch logic as transparent as possible.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:06 +02:00
Isaku Yamahata 34e65944c0 pcie/aer: helper functions for pcie aer capability
This patch implements helper functions for pcie aer capability
which will be used later.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:06 +02:00
Isaku Yamahata 1a1ea6f093 pcie_regs.h: more constants
Add constants for PCI AER log.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:06 +02:00
Isaku Yamahata 89d437df5e pci: add W1C bits to pci status register
This patch adds W1C bit support in the initialization/reset of pci
status registers.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-22 10:00:06 +02:00
Stefan Hajnoczi 4e02d460dd virtio-pci: Convert fprintf() to error_report()
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:58 -06:00
Stefan Hajnoczi e7b43f7e60 virtio-net: Convert fprintf() to error_report()
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:58 -06:00
Stefan Hajnoczi cd92f4cc22 virtio: Convert fprintf() to error_report()
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:58 -06:00
Stefan Hajnoczi 870cef1dae virtio-blk: Convert fprintf() to error_report()
Errors should be logged using error_report() so they go to the
appropriate monitor.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:57 -06:00
Gerd Hoffmann 281a26b15b vgabios update: handle compatibility with older qemu versions
As pointed out by avi the vgabios update is guest-visible and thus has
migration implications.

One change is that the vga has a valid pci rom bar now.  We already have
a pci bus property to enable/disable the rom bar and we'll load the bios
via fw_cfg as fallback for the no-rom-bar case.  So we just have to add
compat properties to handle this case.

A second change is that the magic bochs lfb @ 0xe0000000 is gone.  When
live-migrating a guest from a older qemu version it might be using the
lfb though, so we have to keep it for the old machine types.  The patch
enables the bochs lfb in case we don't have the pci rom bar enabled
(i.e. we are in 0.13+older compat mode).

This patch depends on these patches which add (and use) the pc-0.13
machine type:
  http://patchwork.ozlabs.org/patch/70797/
  http://patchwork.ozlabs.org/patch/70798/

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: avi@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:57 -06:00
Jan Kiszka c1ded3dc9f pcnet: Do not receive external frames in loopback mode
While not explicitly stated in the spec, it was observed on real systems
that enabling loopback testing on the pcnet controller disables
reception of external frames. And some legacy software relies on it, so
provide this behavior.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:57 -06:00
Avi Kivity 2871a3f6b6 piix4 acpi: convert io BAR to type-safe ioport callbacks
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:57 -06:00
Gerd Hoffmann 9dbcca5aa1 virtfs: enable MSI-X
This patch enables MSI-X for virtfs-9p-pci.  It also adds a
compat property to pc-0.13 which turns it of there to stay
compatible to 0.13-stable.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:57 -06:00
Gerd Hoffmann b903a0f721 pc: add 0.13 pc machine type
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:57 -06:00
Bernhard Kohl 0550f9c1b5 pc: disable the BOCHS BIOS panic port
We have an OS which writes to port 0x400 when probing for special hardware.
This causes an exit of the VM. With SeaBIOS this port isn't used anyway.

Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-By: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-21 09:16:57 -06:00
Alex Williamson 8ca209ad90 pc: Fix e820 fw_cfg for big endian
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16 14:35:00 -06:00
Alex Williamson 67d4b0c190 pc: e820 qemu_cfg tables need to be packed
We can't let the compiler define the alignment for qemu_cfg data.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16 14:35:00 -06:00
Jes Sorensen 43ad7e3e98 Add missing braces
This patch adds missing braces around if/else statements that call
macros which are likely to result in errors if the macro is
changed. It also makes the code comply better with CODING_STYLE.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16 14:35:00 -06:00
Gleb Natapov d59f8ba938 Out off array access in usb-net
Properly check array bounds before accessing array element.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16 14:35:00 -06:00
Adam Lackorzynski 9696846600 multiboot: Prevent loading of x86_64 images
A via -kernel supplied x86_64 ELF image is being started in 32bit mode.
Detect and exit if a 64bit image has been supplied.

Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16 09:31:18 -06:00
Alex Williamson b538e53ee7 apic: Don't iterate past last used apic
local_apics are allocated sequentially and never removed, so
we can stop any iterations that go to MAX_APICS as soon as we
hit the first NULL.  Looking at a small guest running a virtio-net
workload with oprofile, this drops apic_get_delivery_bitmask()
from #3 in the profile to down in the noise.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-16 09:31:18 -06:00
Michael S. Tsirkin 4cff0a5994 pci: allow hotplug removal of cold-plugged devices
This patch fixes hot unplug of cold plugged devices
(those present at system start), which got broken by
5beb8ad503 .

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cam Macdonell <cam@cs.ualberta.ca>
Tested-by: Cam Macdonell <cam@cs.ualberta.ca>
Reported-by: Cam Macdonell <cam@cs.ualberta.ca>.
2010-11-16 08:40:08 -06:00
Alex Williamson a6a9239cd8 PCI: Bus number from the bridge, not the device
pcibus_dev_print() was erroneously retrieving the device bus
number from the secondary bus number offset of the device
instead of the bridge above the device.  This ends of landing
in the 2nd byte of the 3rd BAR for devices, which thankfully
is usually zero.

Note: pcibus_get_dev_path() copied this code,
inheriting the same bug.  pcibus_get_dev_path() is used for
ramblock naming, so changing it can effect migration.  However,
I've only seen this byte be non-zero for an assigned device,
which can't migrate anyway, so hopefully we won't run into
any issues.

This patch does not touch pcibus_get_dev_path, as
bus number is guest assigned for nested buses,
so using it for migration is broken anyway.
Fix it properly later.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-16 08:40:08 -06:00
Alex Williamson 1f892feb37 e1000: Fix TCP checksum overflow with TSO
When adding the length to the pseudo header, we're not properly
accounting for overflow.

From: Mark Wu <dwu@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-16 08:40:08 -06:00
Gerd Hoffmann 788954270d more stdvga cleanups.
video.x is gone now.  It was the only user of the
vga bios_offset + bios_size logic.  Zap it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-11-16 08:40:07 -06:00
Gerd Hoffmann 4eccfec494 switch vmware_vga to pci vgabios
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-11-16 08:40:07 -06:00
Gerd Hoffmann 543f8e3468 switch stdvga to pci vgabios
Make stdvga provide the new vgabios binary (with pcibios support)
using the PCI option rom bar.  Seabios will happily load it from
there.  The new vga bios will also lookup the framebuffer address
in pci config space, so the magic bochs lfb @ 0xe0000000 is not
needed any more -> zap it.

Without the patch:

  # dmesg | grep framebuffer
  vesafb: framebuffer at 0xe0000000, mapped to 0xf7e80000, using 1875k, total 8192k
  # lspci -vs2
  00:02.0 VGA compatible controller: Technical Corp. Device 1111 (prog-if 00 [VGA controller])
	Subsystem: Qumranet, Inc. Device 1100
	Physical Slot: 2
	Flags: fast devsel
	Memory at f0000000 (32-bit, prefetchable) [size=8M]
	Expansion ROM at <unassigned> [disabled]

With patch applied:

  # dmesg | grep framebuffer
  vesafb: framebuffer at 0xf0000000, mapped to 0xf7e80000, using 1875k, total 8192k
  # lspci -vs2
  00:02.0 VGA compatible controller: Technical Corp. Device 1111 (prog-if 00 [VGA controller])
	Subsystem: Qumranet, Inc. Device 1100
	Physical Slot: 2
	Flags: fast devsel
	Memory at f0000000 (32-bit, prefetchable) [size=8M]
	Expansion ROM at f0800000 [disabled] [size=64K]

cheers,
  Gerd

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-11-16 08:40:07 -06:00
Michael S. Tsirkin e927d48722 pci: allow hotplug removal of cold-plugged devices
This patch fixes hot unplug of cold plugged devices
(those present at system start), which got broken by
5beb8ad503 .

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cam Macdonell <cam@cs.ualberta.ca>
Tested-by: Cam Macdonell <cam@cs.ualberta.ca>
Reported-by: Cam Macdonell <cam@cs.ualberta.ca>.
2010-11-16 14:55:23 +02:00
Alex Williamson 7f5feab4dd PCI: Bus number from the bridge, not the device
pcibus_dev_print() was erroneously retrieving the device bus
number from the secondary bus number offset of the device
instead of the bridge above the device.  This ends of landing
in the 2nd byte of the 3rd BAR for devices, which thankfully
is usually zero.

Note: pcibus_get_dev_path() copied this code,
inheriting the same bug.  pcibus_get_dev_path() is used for
ramblock naming, so changing it can effect migration.  However,
I've only seen this byte be non-zero for an assigned device,
which can't migrate anyway, so hopefully we won't run into
any issues.

This patch does not touch pcibus_get_dev_path, as
bus number is guest assigned for nested buses,
so using it for migration is broken anyway.
Fix it properly later.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-16 14:53:43 +02:00
Alex Williamson e685b4eb64 e1000: Fix TCP checksum overflow with TSO
When adding the length to the pseudo header, we're not properly
accounting for overflow.

From: Mark Wu <dwu@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-13 23:22:08 +02:00
Gerd Hoffmann df0db2212d intel-hda: fix codec addressing.
The HDA bus supports up to 15 codecs, with addresses 0 ... 14.
We get that wrong in two places:

 * When handing out addresses we accept address 15 as valid.
 * The bitmasks for two registers (WAKEEN and STATESTS) don't
   have bit 14 set.

This patch fixes it.

[ v2: codestyle: add braces ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-11-09 19:32:59 +03:00
malc e2553eb44e Revert "intel-hda: fix codec addressing."
Misses braces

This reverts commit acc086837e.
2010-11-09 19:14:15 +03:00
Gerd Hoffmann acc086837e intel-hda: fix codec addressing.
The HDA bus supports up to 15 codecs, with addresses 0 ... 14.
We get that wrong in two places:

 * When handing out addresses we accept address 15 as valid.
 * The bitmasks for two registers (WAKEEN and STATESTS) don't
   have bit 14 set.

This patch fixes it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-11-09 16:51:12 +03:00
Gerd Hoffmann 17786d52ac intel-hda: add msi support
This patch adds MSI support to the intel hda audio driver.  It is
enabled by default, use '-device intel-hda,msi=0' to disable it.

[ v2: codestyle: add braces ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-11-09 16:51:12 +03:00
Gerd Hoffmann 6a0d02f5be intel-hda: update irq status on WAKEEN changes.
When the guest updates the WAKEEN register we
must re-calculate the IRQ status.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-11-09 16:51:12 +03:00
François Revol af93485cde intel-hda: Honor WAKEEN bits.
HDA: Honor WAKEEN bits when deciding to raise an interrupt on codec
status change.  This prevents an interrupt storm with the Haiku HDA
driver which does not handle codec status changes in the irq handler.

Signed-off-by: François Revol <revol@free.fr>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-11-09 16:51:12 +03:00
Gerd Hoffmann 129dcd2c66 hda-audio: exit cleanup
Add exit callback to the driver.  Unregister the sound card properly
on exit.

[ v2: codestyle: add braces ]

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-11-09 16:51:12 +03:00
Gerd Hoffmann dc4b9240dc intel-hda: exit cleanup
Add pci exit callback for the intel-hda device and cleanup properly.
Also add an exit callback to the HDA bus implementation and make sure
it is called on qdev_free().

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-11-09 16:51:11 +03:00
Kevin Wolf d33ea50a95 scsi-disk: Fix immediate failure of bdrv_aio_*
Fix scsi-disk to use the usual completion paths that involve rerror/werror
handling instead of directly completing the requests in cases where
bdrv_aio_readv/writev returns NULL.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-04 13:54:37 +01:00
Kevin Wolf 18a8d4214b virtio-blk: Handle immediate flush failure properly
Fix virtio-blk to use the usual completion path that involves werror handling
instead of directly completing the request in cases where bdrv_aio_flush
returns NULL.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-04 13:54:37 +01:00
Kevin Wolf b2df7531f3 ide: Handle immediate bdrv_aio_flush failure
If bdrv_aio_flush returns NULL, this should be treated as an error.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-11-04 13:54:37 +01:00
Kevin Wolf 78ced65e6e scsi-disk: Implement werror for flushes
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-04 12:52:16 +01:00
Kevin Wolf 8af7a3ab51 scsi-disk: Complete failed requests in scsi_disk_emulate_command
This pulls the request completion for error cases from the caller to
scsi_disk_emulate_command. This should not change semantics, but allows to
reuse scsi_handle_write_error() for flushes in the next patch.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-04 12:52:16 +01:00
Kevin Wolf 5dba48a882 scsi-disk: Implement rerror option
This implements the rerror option for SCSI disks.

It also includes minor changes to the write path where the same code is used
that was criticized in the review for the changes to the read path required for
rerror support.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2010-11-04 12:52:16 +01:00
Anthony Liguori 4f25ac5f42 Merge remote branch 'mst/for_anthony' into staging 2010-11-01 10:33:45 -05:00
malc 9fe5497c4f hda-audio: Zap tabs
Signed-off-by: malc <av1474@comtv.ru>
2010-11-01 17:57:24 +03:00
Gerd Hoffmann d61a4ce8f0 Add Intel HD Audio support to qemu.
This patch adds three devices to qemu:

intel-hda
	Intel HD Audio Controller, the PCI device.  Provides a HDA bus.
	Emulates ICH6 at the moment.  Adding a ICH9 PCIE
	variant shouldn't be hard.

hda-duplex
	HDA Codec.  Attaches to the HDA bus.  Supports 16bit stereo,
	rates 16k -> 96k, playback, recording and volume control
	(with CONFIG_MIXEMU=y).

hda-output
	HDA Codec without recording support.  Subset of the hda-duplex
	codec.  Use this if you don't want your guests access your mic.

Usage: add '-device intel-hda -device hda-duplex' to your command line.

Tested guests:
 * Linux works.
 * Win7 works.
 * DOS (mpxplay) works.
 * WinXP doesn't work.

[ v2 changes ]
 * Fixed endianess, big endian hosts work now.
 * Fixed some emulation bugs.
 * Added immediate command emulation.
 * Added vmstate support.
 * Make it behave like all other sound card drivers:
   - can be configured via '--audio-card-list=hda'
   - can be added to a VM using '-soundhw hda'
 * Code style fixups.
 * Zapped guest-triggerable asserts.
 * Handle partial reads/writes of audio data correctly.

Cc: malc <av1474@comtv.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-11-01 17:57:22 +03:00
Gerd Hoffmann cdae5cfbd3 add VMSTATE_BOOL
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
2010-11-01 17:57:12 +03:00
Blue Swirl 97bf4851fe sparc32: convert debug printf statements to tracepoints
Replace debug printf statements with tracepoints.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-31 09:24:14 +00:00
Jes Sorensen ff753bb9a6 Do not redefine reserved key-words TRUE/FALSE
TRUE/FALSE are generally reserved keywords and shouldn't be defined in
a driver like this. Rename the macros to SDP_TRUE and SDP_FALSE
respectively.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-30 08:02:38 +00:00
malc 338b922edd Mov muldiv64 to qemu-common.h (Thus unbreaking gus)
Signed-off-by: malc <av1474@comtv.ru>
2010-10-30 01:41:01 +04:00
Michael S. Tsirkin b907b69dd7 Merge branch 'pci' into for_anthony 2010-10-27 19:07:10 +02:00
Michael S. Tsirkin 804b207170 pcie: update satus on reset
Reset never triggers a new event, so it's enough to
update status.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27 19:01:59 +02:00
Michael S. Tsirkin b794ec7ce8 msi: minor cleanups
Comment fixup (tell what it does not what it does not do),
typo fix, whitespace fix.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27 19:01:59 +02:00
Michael S. Tsirkin 531a0b82dd msi: simplify range checks
config write handlers should be idempotent.
So no need for complex range checks: a simple
one checking that we are touching the relevant capability
will do.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27 19:01:59 +02:00
Michael S. Tsirkin f9aebe2ef5 pci: improve w1c mask handling
- save/restore must not check w1c bits
  since they are in fact guest controlled
- clear w1c bits on reset

Note: for express there are different kinds of
reset, some leave part of config space alone.
We will likely need a sticky bit mask to implement this.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27 19:01:59 +02:00
Michael S. Tsirkin 6bde6aaac6 pcie: clean up hot plug notification
Simplify logic for hotplug notification, by tracking state of the
logical interrupt condition.  We then simply use this variable to make
the interrupt decision, according to spec.

API is made cleaner as we no longer force users to pass in
old slot control value.

Includes fixes by Isaku Yamahata.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2010-10-27 19:01:59 +02:00
Michael S. Tsirkin ac0cdda347 pcie: simplify range check
Simplify code slighly by reversing the polarity
for the range check

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2010-10-27 19:01:59 +02:00
Blue Swirl 5afb986917 Introduce range.h
Extract range functions from pci.h. These will be used by later patches
by non-PCI devices. Adjust current users.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
(cherry picked from commit bf1b007123)
2010-10-27 19:01:59 +02:00
Michael S. Tsirkin 258dc7c96b virtio: sanity-check available index
Checking available index upon load instead of
only when vm is running makes is easier to
debug failures.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-27 18:54:02 +02:00
Anthony Liguori 21bcc5907f Merge remote branch 'kwolf/for-anthony' into staging 2010-10-26 09:50:58 -05:00
Blue Swirl c57c846a80 qemu-timer: move commonly used timer code to qemu-timer-common
Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.

Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.

Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.

After this change, tracing can be used also for user code and
simpletrace on Win32.

Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-23 15:24:07 +00:00
Blue Swirl 5340c8a0f3 mips_fulong2e: fix ram allocation
RAM registration used incorrect offset.

Fix by using the offset obtained previously for this purpose.

Spotted by GCC 4.6.0 20100925 warning, which is also avoided.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-22 18:26:08 +00:00
Kevin Wolf 8c269b542c virtio-blk: Respect werror option for flushes
The werror option now affects not only write requests, but also flush requests.
Previously, it was not possible to stop a VM on a failed flush.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-10-22 14:49:35 +02:00
Kevin Wolf e2bcadadc3 ide: Handle flush failure
Instead of always assuming success for bdrv_aio_flush, actually do something
with the error. This respects the werror option and accordingly ignores the
error, reports it to the guest or stops the VM and retries after cont.

Ignoring the error is trivial, obviously. For stopping the VM and retrying
later old code can be reused, but we need to introduce a new status for "retry
a flush". For reporting to the guest, fortunately the same action is required
as for a failed read/write (status = DRDY | ERR, error = ABRT), so this code
can be reused as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-10-22 14:49:35 +02:00
Kevin Wolf 6bcb1a79a3 ide: Factor ide_flush_cache out
The next patch reuses this code, so put it in its own function.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-10-22 14:49:35 +02:00
Christoph Hellwig a58b8d5401 ide: set WCACHE supported in IDENTIFY data
ATA does not only have the WCACHE enabled bit in identify word 85, but also
a WCACHE supported bit in word 82.  While the Linux kernel is fine with the
latter at least hdparm also needs the former before correctly displaying
the cache settings.  There's also a non-zero chance other operating systems
are more picky in their volatile write cache detection.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-10-22 14:49:35 +02:00
Gleb Natapov 633aa0acfe Fix pci hotplug to generate level triggered interrupt.
SCI is level triggered. pci hotplug should behave appropriately.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-20 17:23:28 -05:00
Gleb Natapov 4441a2870a Use defines instead of numbers for pci hotplug sts bit
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-20 17:23:28 -05:00
Gerd Hoffmann b2d4d83299 wacom tablet: activate event handlers.
Add qemu_activate_mouse_event_handler() calls to the usb wavom tablet so
it actually receives events.  Also make sure we only remove the handler
if we registered it before.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-20 12:10:59 -05:00
Gerd Hoffmann cd49692615 vmmouse: adapt to mouse handler changes.
This patch updates the vmmouse handler registration and activation.

Old behavior:
  vmmouse_read_id, vmmouse_request_relative and vmmouse_request_absolute
  unregister the handler and re-register it.

New behavior:
  vmmouse_request_relative and vmmouse_request_absolute will unregister
  the handler in case the mode did change.  Then register and active the
  handler with current mode if needed.

Note that the old code never ever *activates* the handler, so the
vmmouse doesn't receive events.  This trips up Fedora 14 for example:
Boot a default install without usb tablet, watch the X-Server activating
the vmmouse then, enjoy a non-functional mouse.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-10-20 12:10:59 -05:00
Venkateswararao Jujjuri (JV) 45b23ff8f0 [virtio-9p] Add support to v9fs_string_alloc_printf() for handling %lu.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20 12:10:59 -05:00
Sanchit Garg 56d15a5329 [virtio-9p] Use preadv/pwritev instead of readv/writev
readv & writev, read & write respectively from the current offset
of the file & hence their use has to be preceeded by a call to lseek.
preadv/writev can be used instead, as they take the offset as an argument.
This saves one system call( lseek ).
In case preadv is not supported, it is implemented by an lseek
followed by a readv. Depending upon the configuration of QEMU, the
appropriate read & write methods are selected. This patch also fixes the
zero byte read/write bug & obviates the need to apply a fix for that bug separately.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Sanchit Garg <sancgarg@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20 12:10:59 -05:00
Harsh Prateek Bora 9f506893a4 [virtio-9p] Qemu 9p commandline options validity checks
Signed-off-by: Harsh Prateek Bora <harsh@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20 12:10:58 -05:00
Aneesh Kumar K.V 70fc55ebe4 virtio-9p: Support mapped posix acl
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20 12:10:58 -05:00
Aneesh Kumar K.V fc22118d9b virtio-9p: Use layered xattr approach
We would need this to make sure we handle the mapped
security model correctly for different xattr names.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20 12:10:58 -05:00
Venkateswararao Jujjuri (JV) 0f8151cb75 [virtio-9p] Ignore O_DIRECT hint from client.
The O_DIRECT flag imposes alignment restrictions on the length and address
of userspace buffers and the file offset of I/Os.

While VirtFS/9P has plans to implement O_DIRECT behavior on the server,
for now we will stick to a behavior like NFS by bypassing the page cache
only on the client. Server may still cache the I/O.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20 12:10:58 -05:00
M. Mohan Kumar df0973a465 qemu-virtio-9p: Implement TREADLINK operation for 9p2000.L
Synopsis

        size[4] TReadlink tag[2] fid[4]
        size[4] RReadlink tag[2] target[s]

Description
        Readlink is used to return the contents of the symoblic link
        referred by fid. Contents of symboic link is returned as a
        response.

        target[s] - Contents of the symbolic link referred by fid.

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20 12:10:58 -05:00
Venkateswararao Jujjuri (JV) b41e95d348 [virtio-9p] Introduce server side TFSYNC/RFSYNC for dotl
SYNOPSIS
    size[4] Tfsync tag[2] fid[4]

    size[4] Rfsync tag[2]

DESCRIPTION

The Tfsync transaction transfers ("flushes") all modified in-core data of
file identified by fid to the disk device (or other  permanent  storage
device)  where that  file  resides.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20 12:10:58 -05:00
M. Mohan Kumar 8f35400358 qemu-virtio9p: Implement TGETLOCK
Synopsis

    size[4] TGetlock tag[2] fid[4] getlock[n]
    size[4] RGetlock tag[2] getlock[n]

Description

TGetlock is used to test for the existence of byte range posix locks on
a file identified by given fid. The reply contains getlock structure. If
the lock could be placed it returns F_UNLCK in type field of getlock structure.
Otherwise it returns the details of the conflicting locks in the getlock
structure

    getlock structure:
      type[1] - Type of lock: F_RDLCK, F_WRLCK
      start[8] - Starting offset for lock
      length[8] - Number of bytes to lock
        If length is 0, lock all bytes starting at the location
        'start' through to the end of file
      proc_id[4] - process id that wants to take lock/owns the task
               in case of reply
      client[4] - Client id of the system that owns the process

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20 12:10:58 -05:00
M. Mohan Kumar 82cc3ee88b [virto-9p] Implement TLOCK
Synopsis

    size[4] TLock tag[2] fid[4] flock[n]
    size[4] RLock tag[2] status[1]

Description

Tlock is used to acquire/release byte range posix locks on a file
identified by given fid. The reply contains status of the lock request

    flock structure:
        type[1] - Type of lock: F_RDLCK, F_WRLCK, F_UNLCK
        flags[4] - Flags could be either of
          P9_LOCK_FLAGS_BLOCK(1) - Blocked lock request, if there is a
            conflicting lock exists, wait for that lock to be released.
          P9_LOCK_FLAGS_RECLAIM(2) - Reclaim lock request, used when client is
            trying to reclaim a lock after a server restrart (due to crash)
        start[8] - Starting offset for lock
        length[8] - Number of bytes to lock
          If length is 0, lock all bytes starting at the location 'start'
          through to the end of file
        pid[4] - PID of the process that wants to take lock
        client_id[4] - Unique client id

        status[1] - Status of the lock request, can be
          P9_LOCK_SUCCESS(0), P9_LOCK_BLOCKED(1), P9_LOCK_ERROR(2) or
          P9_LOCK_GRACE(3)
          P9_LOCK_SUCCESS - Request was successful
          P9_LOCK_BLOCKED - A conflicting lock is held by another process
          P9_LOCK_ERROR - Error while processing the lock request
          P9_LOCK_GRACE - Server is in grace period, it can't accept new lock
                requests in this period (except locks with
                P9_LOCK_FLAGS_RECLAIM flag set)

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20 12:10:58 -05:00
Sripathi Kodi ab03b63d7a [virtio-9p] open should not return EBADF
When 9P server fails to create a file due to permission problems it should
return EPERM. However the current 9P2000.L code returns EBADF. EBADF is NOT
a valid return value from open() call.

The problem is because we do not preserve the errno variable properly. If the
file open had failed, the call to close() on the fd in v9fs_post_lcreate()
fails and sets errno to EBADF. We should preserve the errno that we got from
open() and we should call close() only if we had a valid fd.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
2010-10-20 12:10:58 -05:00
Blue Swirl d8023f3114 apic: convert debug printf statements to tracepoints
Replace debug printf statements with tracepoints.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-20 16:41:28 +00:00
Isaku Yamahata 48ebf2f90f x3130: pcie downstream port
Implement TI x3130 pcie downstream port switch.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20 12:06:53 +02:00
Isaku Yamahata faf1e708d5 x3130: pcie upstream port
Implement TI x3130 pcie upstream port switch.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20 12:06:50 +02:00
Isaku Yamahata 8135aeed0f ioh3420: pcie root port in X58 ioh
Implements pcie root port switch in intel X58 ioh
whose device id is 0x3420.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20 12:06:43 +02:00
Isaku Yamahata bc20ba98b1 pcie port: define struct PCIEPort/PCIESlot and helper functions
define struct PCIEPort which represents common part
of pci express port.(root, upstream and downstream.)
add a helper function for pcie port which can be used commonly by
root/upstream/downstream port.
define struct PCIESlot which represents common part of
pcie slot.(root and downstream.) and helper functions for it.
helper functions for chassis, slot -> PCIESlot conversion.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20 12:05:45 +02:00
Isaku Yamahata 0208def1ca pci/bridge: fix pci_bridge_reset()
The lower bits of base/limit registers is RO and shouldn't be zero
cleared on reset. This patch fixes it.
In fact, the default value of base/limit registers aren't specified
in the spec. And some bridges disable forwarding on reset instead of
zeroing base/limit registers.
So introduce one function to disable bridge forwarding so that
such bridges can use it. It will be used later.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20 12:05:10 +02:00
Isaku Yamahata 6da6d29fa6 pcie: comment on hpev_intx
document hpev_intx.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-20 12:04:36 +02:00
Isaku Yamahata 0428527c62 pcie: helper functions for pcie capability and extended capability
This patch implements helper functions for pci express capability
and pci express extended capability allocation.
NOTE: presence detection depends on pci_qdev_init() change.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19 14:09:44 +02:00
Isaku Yamahata 08f3dcf13f pcie: add pcie constants to pcie_regs.h
add pcie constants to pcie_regs.h.
Those constants should go to Linux pci_regs.h and then the file should
go away eventually.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19 14:09:12 +02:00
Isaku Yamahata e4c7d2aef8 msi: implements msi
implements msi related functions.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19 14:09:06 +02:00
Isaku Yamahata 99443c21b0 pci: use pci_word_test_and_clear_mask() in pci_device_reset()
use pci_clear_bit_word() in pci_device_reset() where appropriate.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19 13:57:33 +02:00
Isaku Yamahata a5d1fd20cc pci: introduce helper function to handle msi-x and msi.
this patch implements helper functions to handle msi-x and msi
uniformly.
They will be used later.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19 13:57:24 +02:00
Isaku Yamahata aabcf5266f pci: introduce helper functions to test-and-{clear, set} mask in configuration space
This patch introduces helper functions to test-and-{clear, set} mask in configuration
space. pci_{byte, word, long, quad}_test_and_{clear, set}_mask().
They will be used later.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-19 13:57:21 +02:00
Isaku Yamahata 1a4f5971b6 pci: make pci_del_capability() update for w1cmask
Clear w1cmask when deleting a pci capability.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-18 08:07:01 +02:00
Blue Swirl 49a2942d9b Delete write only variables
Compiling with GCC 4.6.0 20100925 produced warnings like:
/src/qemu/net/tap-win32.c: In function 'tap_win32_open':
/src/qemu/net/tap-win32.c:582:12: error: variable 'hThread' set but not used [-Werror=unused-but-set-variable]

Fix by removing the unused variables.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-13 18:41:29 +00:00
Blue Swirl ae0bfb79aa ppc: remove video.x
Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it.

Remove video.x MoL hacks.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-13 18:38:07 +00:00
Blue Swirl f3f5b86725 lsi53c895a: avoid a write only variable
Compiling with GCC 4.6.0 20100925 produced a warning:
/src/qemu/hw/lsi53c895a.c: In function 'lsi_do_msgout':
/src/qemu/hw/lsi53c895a.c:848:9: error: variable 'len' set but not used [-Werror=unused-but-set-variable]

Fix by adding a dummy cast so that the variable is not unused for
non-debug case.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-13 18:38:07 +00:00
Blue Swirl ef4760626e eepro100: initialize a variable in all cases
Compiling with GCC 4.6.0 20100925 produced warnings:
/src/qemu/hw/eepro100.c: In function 'eepro100_read4':
/src/qemu/hw/eepro100.c:1351:14: error: 'val' may be used uninitialized in this function [-Werror=uninitialized]
/src/qemu/hw/eepro100.c: In function 'eepro100_read2':
/src/qemu/hw/eepro100.c:1328:14: error: 'val' may be used uninitialized in this function [-Werror=uninitialized]
/src/qemu/hw/eepro100.c: In function 'eepro100_read1':
/src/qemu/hw/eepro100.c:1285:13: error: 'val' may be used uninitialized in this function [-Werror=uninitialized]

Fix by initializing 'val' at start.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-13 18:38:07 +00:00
Blue Swirl 8c78881f48 cirrus: avoid write only variables
Compiling with GCC 4.6.0 20100925 produced a lot of warnings like:
In file included from /src/qemu/hw/cirrus_vga_rop.h:174:0,
                 from /src/qemu/hw/cirrus_vga.c:284:
/src/qemu/hw/cirrus_vga_rop2.h: In function 'cirrus_patternfill_0_8':
/src/qemu/hw/cirrus_vga_rop2.h:48:18: error: variable 'col' set but not used [-Werror=unused-but-set-variable]
/src/qemu/hw/cirrus_vga_rop2.h: In function 'cirrus_colorexpand_transp_0_8':
/src/qemu/hw/cirrus_vga_rop2.h:104:18: error: variable 'col' set but not used [-Werror=unused-but-set-variable]

Fix the warnings by introducing an inline function, which avoids
exposing write-only variables.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-10-13 18:38:07 +00:00
Anthony Liguori a2d3f69530 Merge remote branch 'mst/for_anthony' into staging 2010-10-11 15:37:11 -05:00