We used to use mmio for notification. This could be slow on some arch
(e.g on x86 without EPT). So this patch introduces pio bar and a pio
notification cap for modern device. This ability is enabled through
property "modern-pio-notify" for virtio pci devices and was disabled
by default. Management can enable when it thinks it was needed.
Benchmarks shows almost no obvious difference compared to legacy
device on machines without ept. Thanks Wenli Quan <wquan@redhat.com>
for the benchmarking.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use data match eventfd for 1.0 notification currently. This could
be slow since software decoding is needed for mmio exit. To speed this
up, we can switch to use zero length mmio eventfd for 1.0 notification
since we can examine the queue index directly from the writing
address. KVM kernel module can utilize this by registering it to fast
mmio bus which could be as fast as pio on ept capable machine when
fast mmio is supported by host kernel.
Lots of improvements were seen on a ept capable machine:
Guest RX:(TCP)
size/session/+throughput%/+cpu%/-+per cpu%/
64/1/+1.6807%/[-16.2421%]/[+21.3984%]/
64/2/+0.6091%/[-11.0187%]/[+13.0678%]/
64/4/+0.0553%/[-5.9768%]/[+6.4155%]/
64/8/+0.1206%/[-4.0057%]/[+4.2984%]/
256/1/-0.0031%/[-10.1166%]/[+11.2517%]/
256/2/-0.5058%/[-6.1656%]/+6.0317%]/
...
Guest TX:(TCP)
size/session/+throughput%/+cpu%/-+per cpu%/
64/1/[+18.9183%]/-0.2823%/[+19.2550%]/
64/2/[+13.5714%]/[+2.2675%]/[+11.0533%]/
64/4/[+13.1070%]/[+2.1817%]/[+10.6920%]/
64/8/[+13.0426%]/[+2.0887%]/[+10.7299%]/
256/1/[+36.2761%]/+6.3434%/[+28.1471%]/
...
1024/1/[+44.8873%]/+2.0811%/[+41.9335%]/
...
1024/4/+0.0228%/[-2.2044%]/[+2.2774%]/
...
16384/2/+0.0127%/[-5.0346%]/[+5.3148%]/
...
65535/1/[+0.0062%]/[-4.1183%]/[+4.3017%]/
65535/2/+0.0004%/[-4.2311%]/[+4.4185%]/
65535/4/+0.0107%/[-4.6106%]/[+4.8446%]/
65535/8/-0.0090%/[-5.5178%]/[+5.8306%]/
Latency:(TCP_RR)
size/session/+transaction rate%/+cpu%/-+per cpu%/
64/1/[+6.5248%]/[-9.2882%]/[+17.4322%]/
64/25/[+11.0854%]/[+0.8000%]/[+10.2038%]/
64/50/[+12.1076%]/[+2.4627%]/[+9.4131%]/
256/1/[+5.3677%]/[+10.5669%]/-4.7024%/
256/25/[+5.6402%]/-0.8962%/[+6.5955%]/
256/50/[+5.9685%]/[+1.7766%]/[+4.1188%]/
4096/1/+0.2508%/[-10.4941%]/[+12.0047%]/
4096/25/[+1.8533%]/-0.0273%/+1.8812%/
4096/50/[+1.2156%]/-1.4134%/+2.6667%/
Notes: data with '[]' is the one whose significance is greater than 95%.
Thanks Wenli Quan <wquan@redhat.com> for the benchmarking.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't migrate the followings fields for virtio-pci:
uint32_t dfselect;
uint32_t gfselect;
uint32_t guest_features[2];
struct {
uint16_t num;
bool enabled;
uint32_t desc[2];
uint32_t avail[2];
uint32_t used[2];
} vqs[VIRTIO_QUEUE_MAX];
This will confuse driver if migrating during initialization. Solves
this issue by:
- introduce transport specific callbacks to load and store extra
virtqueue states.
- add a new subsection for virtio to migrate transport specific modern
device state.
- implement pci specific callbacks.
- add a new property for virtio-pci for whether or not to migrate
extra state.
- compat the migration for 2.4 and elder machine types
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
In-kernel ITS emulation on ARM64 will require to supply requester IDs.
These IDs can now be retrieved from the device pointer using new
pci_requester_id() function.
This patch adds pci_dev pointer to KVM GSI routing functions and makes
callers passing it.
x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c
also made passing PCI device pointer instead of NULL for consistency with
the rest of the code.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When CONFIG_LINUX is off, devices "virtio-keyboard-device",
"virtio-mouse-device", "virtio-tablet-device" and
"virtio-input-host-device" aren't compiled in, yet
"virtio-keyboard-pci", "virtio-mouse-pci", "virtio-tablet-pci" and
"virtio-input-host-pci" still are. Attempts to introspect them crash,
e.g.
$ qemu-system-x86_64 -device virtio-tablet-pci,help
**
ERROR:/work/armbru/qemu/qom/object.c:333:object_initialize_with_type: assertion failed: (type != NULL)
Broken in commit 710e2d9 and commit 006a5ed.
Fix by compiling the "virtio-FOO-pci" exactly when compiling the
"virtio-FOO-device": compile "virtio-keyboard-device",
"virtio-mouse-device", "virtio-tablet-device" regardless of
CONFIG_LINUX, and compile "virtio-input-host-pci" only for
CONFIG_LINUX.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <1444320700-26260-3-git-send-email-armbru@redhat.com>
And do not issue an error_report in that case.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the utility function pow2ceil() for rounding up to the next
largest power of 2, rather than inline calculation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1437741192-20955-3-git-send-email-peter.maydell@linaro.org
Each memory_region_add_subregion must be paired with
memory_region_del_subregion.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
NOTIFY_ON_EMPTY, ANY_LAYOUT and BAD are only valid on the legacy
interface.
Hide them from modern guests.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVo6kaAAoJECgfDbjSjVRpEvcH/jiNHGHD+AzFSJ6+vcKH8MHY
GVyWxvnFimyusnv74c7nwTsRGjRycKCPFy8GN/ZX+VWpIpPwK9mysBQ97zM45xeM
T+w1eT4zXafZESr6coAaUu6AvPnVPmsx2im6j5LxBnyIzj41D7dydOM0dU/OHOSI
gUS2DlhqqRPqkB2LscIrkkCmiWpizxTACzZzrko+AuTZ6YVTOEWcnRps9gqR+MWF
o24uppNPIkkmKoWBbXEiTfTqy7rcWydCb/BiM0UMo2cTOeXESNiaQNbKL2ED8K5d
187sL9XCkBrImh4NOFMy4ZKsJ7Uy9zg+zpk03XbjMF+7S155Fcacp2ahDtuCoDA=
=DITH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio: fixes for 2.4
pc and virtio changes, bugfixes only.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon Jul 13 13:03:38 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
pc: fix reuse of pc-i440fx-2.4 in pc-i440fx-2.3
Revert "virtio-net: enable virtio 1.0"
virtio-pci: don't crash on illegal length
qdev: fix 64 bit properties
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some guests seem to access cfg with an illegal length value.
It's worth fixing them but debugging is easier if
qemu does not crash.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Most notably, this includes the TCO support for ICH: the last feature for 2.4
as we are entering the hard freeze.
Bugfixes only from now on.
virtio pci also gained cfg access capability - arguably a bugfix
since virtio spec makes it mandatory, but it's a big patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVnO/3AAoJECgfDbjSjVRp6lAH/2RAlzoopHDNMCj5r3wHygnA
WD1rjugftcQNJ5HkL1Oe9heQnjUcx4jdaskrTyP8vElY1zheGPYYqtPYjMB3Kfsu
fIQUhjhU6lKjF+0Q9QeyOyz9uvHWgTwtiQsHdFj+fsw7qMpiiADgGmlXoin01ZF9
yGaGZ5GcLNEHXGWyzEpKOml1UxtMFZRe649KV1tqLBoOSLdw+c3SzrGvKYjUtGnG
luMHPAJcKS7khSTyCVJN8un6SjbC/aB22mlh7TgxeNBANsGJVCH09lLCmczkIKAJ
73sut/+2f2aS9qGaSJiI5ElENDhSlWlSjNG/x4dp07fvurxpojde+bYS9veSo3c=
=cQ0D
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,virtio,pci: fixes and updates
Most notably, this includes the TCO support for ICH: the last feature for 2.4
as we are entering the hard freeze.
Bugfixes only from now on.
virtio pci also gained cfg access capability - arguably a bugfix
since virtio spec makes it mandatory, but it's a big patch.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed Jul 8 10:40:07 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
tco-test: fix up config accesses and re-enable
virtio fix cfg endian-ness for BE targets
virtio-pci: implement cfg capability
virtio: define virtio_pci_cfg_cap in header.
pcie: Set the "link active" in the link status register
pci_regs.h: import from linux
virtio_net: reuse constants from linux
hw/i386/pc: don't carry FDC from pc_basic_device_init() to pc_cmos_init()
hw/i386/pc: reflect any FDC @ ioport 0x3f0 in the CMOS
hw/i386/pc: factor out pc_cmos_init_floppy()
ich9: implement strap SPKR pin logic
tests: add testcase for TCO watchdog emulation
ich9: add TCO interface emulation
acpi: split out ICH ACPI support
Revert "dataplane: allow virtio-1 devices"
dataplane: fix cross-endian issues
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
address_space_rw assumes data is in target format
and byte-swaps it if target is BE and device is LE.
Use fixed-endian LE APIs instead.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
spec says we must, so let's do it!
Note: the implementation is incorrect for BE targets.
Will fix with a patch on top, not a big deal now as
the only user is seabios, used on x86 only.
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Anticipating for the introduction of new add/remove functions taking
a qemu_irq parameter, let's rename existing ones with a gsi suffix.
Signed-off-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Vikram Sethi <vikrams@codeaurora.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJVjVb/AAoJECgfDbjSjVRpeaEH/2bwK7BGgczEQ7fhzIEaQSQq
SV7aychNZvUFASXLV6aVmQCdYixZxlI9KDn0pMRYntUcjxRRB48U3N5Sy4km46Pw
LLN3vxGzHazlE7AJ5c+WVDf0e2k7v3CpZ/TKXzPHmvZXIuBfjKXtKzBgyQYxGkmL
JgRrRSHDrsbvfmhI4uHMpCTYs/WeY1cuA1IzvimBjmvVP5kkko4NoX+HEWmGJ6WK
13fQuV+Cvz7Yk40HRpPAM0QPV2etGCj+dU7xgF9BWnn9mzbGC5iy8EUClyGil/af
k3i/bCxs6IgpQ76LaezJtGPtn1jbohrO4qRqlatUAJCwgCYMCkxkIk+Pr4A3x4c=
=6WvB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, pci fixes, enhancements
Almost exclusively bugfixes, though in this case,
we are adding functionality to the pxb in order
to make OVMF work on it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 26 14:43:27 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
Fix glib_subprocess test
hw/pci-bridge: format special OFW unit address for PXB host
hw/core: explicit OFW unit address callback for SysBusDeviceClass
hw/pci-bridge: disable SHPC in PXB
hw/pci-bridge: introduce "shpc" property
hw/pci: introduce shpc_present() helper function
hw/pci-bridge: add macro for "msi" property
hw/pci-bridge: add macro for "chassis_nr" property
hw/pci-bridge: expose _test parameter in SHPC_VMSTATE()
migration: introduce VMSTATE_BUFFER_UNSAFE_INFO_TEST()
add pci-bridge-seat
pc: cleanup and convert TMP ACPI device description to AML API
MAINTAINERS: add ACPI entry
vhost: correctly pass error to caller in vhost_dev_enable_notifiers()
balloon: add a feature bit to let Guest OS deflate balloon on oom
qdev: fix OVERFLOW_BEFORE_WIDEN
virito-pci: fix OVERRUN problem
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This allows to assign host input devices to the guest:
qemu -device virtio-input-host-pci,evdev=/dev/input/event<nr>
The guest gets exclusive access to the input device, so be careful
with assigning the keyboard if you have only one connected to your
machine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move properties from virtio-*-pci to virtio-*-device.
Also make better use of QOM and attach common properties
to the abstract parent classes (virtio-input-device and
virtio-input-pci-device).
Switch the hid device instance init functions over to use
virtio_instance_init_common, so we get the properties of the
virtio device aliased properly to the virtio pci proxy.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Overrunning array "proxy->guest_features" of 2 4-byte
elements at element index 2 (byte offset 8) using index
"proxy->gfselect" (which evaluates to 2). Normally, the
Linux kernel driver just read/write '0' or '1' as the
"proxy->gfselect" values, so using '<' instead of '=<' to
make coverity happy and avoid potential harm.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds virtio-pci support for the emulated virtio-input
devices. Using them is as simple as adding "-device virtio-tablet-pci"
to your command line. If you want add multiple devices but don't want
waste a pci slot for each you can compose a multifunction device this way:
qemu -device virtio-keyboard-pci,addr=0d.0,multifunction=on \
-device virtio-tablet-pci,addr=0d.1,multifunction=on
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds the virtio-pci support bits for virtio-input-device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Initialize the modern bar and the VirtIOPCIRegion fields early, in
realize. Also add a size field to VirtIOPCIRegion and variables for
pci bars to VirtIOPCIProxy.
This allows virtio-pci subclasses to change things before the
device_plugged callback applies them. virtio-vga will use that to
arrange regions in a way that virtio-vga is compatible to both stdvga
(in vga mode) and virtio-gpu-pci (in pci mode).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now the three struct virtio_pci_caps are identical,
lets drop two of them ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Also fill offset and length automatically,
from VirtIOPCIRegion->offset and region size.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add function to map modern virtio regions.
Add offset to VirtIOPCIRegion.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add init function for the modern pci regions,
move over the init code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
For now just place the MemoryRegion there,
following patches will add more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, during host notifier set. We only add eventfd for legacy
bar, this is not correct since:
- Non-transitional device does not have legacy bar, so qemu will crash
since proxy->bar was not initialized.
- Modern device uses modern bar and notify cap to notify the device,
we should add eventfd for proxy->notify.
So this patch fixes the above two issues by adding eventfd based on
whether legacy or modern device were supported.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds variables for the pci bars (to get rid of the magic
numbers in the code) and moves the modern virtio bar to region 4 so
regions 2+3 are kept free. virtio-vga wants use them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Add VIRTIO_PCI_FLAG_DISABLE_LEGACY and VIRTIO_PCI_FLAG_DISABLE_MODERN
for VirtIOPCIProxy->flags. Also add properties for them. They can be
used to disable modern (virtio 1.0) or legacy (virtio 0.9) modes.
By default only legacy is advertized, modern will be turned on by
default once all remaining spec compilance issues are addressed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
virtio 1.0 config space is in LE format for all
devices, use modern wrappers when accessed through
the 1.0 BAR.
Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
This is somewhat functional. With this, and linux driver from my tree,
I was able to use virtio net as virtio 1.0 device for light browsing.
At the moment, dataplane and vhost code is
still missing.
Based on Cornelia's virtio 1.0 patchset:
Date: Thu, 11 Dec 2014 14:25:02 +0100
From: Cornelia Huck <cornelia.huck@de.ibm.com>
To: virtualization@lists.linux-foundation.org, qemu-devel@nongnu.org
Cc: rusty@rustcorp.com.au, thuth@linux.vnet.ibm.com, mst@redhat.com,
Cornelia Huck <cornelia.huck@de.ibm.com>
Subject: [PATCH RFC v6 00/20] qemu: towards virtio-1 host support
Message-Id: <1418304322-7546-1-git-send-email-cornelia.huck@de.ibm.com>
which is itself still missing some core bits.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
We should validate the vq index against nvqs_with_notifiers. Otherwise we may
try to mask or unmask vector for vqs without notifiers (e.g control vq). This
will lead qemu abort on kvm_irqchip_commit_routes() when trying to boot win8.1
guest.
Fixes 851c2a75a6 ("virtio-pci: speedup MSI-X
masking and unmasking")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_PCI_QUEUE_MAX is not only used for pci, so rename it be generic.
Cc: Amit Shah <amit.shah@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch passes error pointer to transport specific device_plugged()
callback. Through this way, device_plugged() can do some transport
specific check and fail. This will be uesd by following patches that
check the number of virtqueues against the transport limitation.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Nearly all transports have been offering VIRTIO_F_NOTIFY_ON_EMPTY,
s390-virtio being the exception. There's no reason why it shouldn't
offer it as well, though (handling is done in core anyway), so let's
move it to the common virtio features.
While we're changing it anyway, fix the indentation for the
DEFINE_VIRTIO_COMMON_FEATURES macro.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Move host_features from the individual transport proxies into
the virtio device. Transports may continue to add feature bits
during device plugging.
This should it make easier to offer different sets of host features
for virtio-1/transitional support.
Tested-by: Shannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So far virtio-scsi-device can't expose host features to guest while
using virtio-mmio because it doesn't set DEFINE_VIRTIO_SCSI_FEATURES on
backend or transport.
The host features belong to the backends while virtio-scsi-pci,
virtio-scsi-s390 and virtio-scsi-ccw set the DEFINE_VIRTIO_SCSI_FEATURES
on transports. But they already have the ability to forward property
accesses to the backend child. So if we move the host features to
backends, it doesn't break the backwards compatibility for them and
make host features work while using virtio-mmio.
Move DEFINE_VIRTIO_SCSI_FEATURES to the backend virtio-scsi. The
transports just sync the host features from backends.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
So far virtio-net-device can't expose host features to guest while
using virtio-mmio because it doesn't set DEFINE_VIRTIO_NET_FEATURES on
backend or transport. So the performance is low.
The host features belong to the backend while virtio-net-pci,
virtio-net-s390 and virtio-net-ccw set the DEFINE_VIRTIO_NET_FEATURES
on transports. But they already have the ability to forward property
accesses to the backend child. So if we move the host features to
backends, it doesn't break the backwards compatibility for them and
make host features work while using virtio-mmio.
Here we move DEFINE_VIRTIO_NET_FEATURES to the backend virtio-net. The
transports just sync the host features from backend. Meanwhile move
virtio_net_set_config_size to virtio-net to make sure the config size
is correct and don't expose it.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
This patch tries to speed up the MSI-X masking and unmasking through
the mapping between vector and queues. With this patch it will there's
no need to go through all possible virtqueues, which may help to
reduce the time spent when doing MSI-X masking/unmasking a single
vector when more than hundreds or even thousands of virtqueues were
supported.
Tested with 80 queue pairs virito-net-pci by changing the smp affinity
in the background and doing netperf in the same time:
Before the patch:
5711.70 Gbits/sec
After the patch:
6830.98 Gbits/sec
About 19.6% improvements in throughput.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently we will try to traverse all virtqueues to find a subset that
using a specific vector. This is sub optimal when we will support
hundreds or even thousands of virtqueues. So this patch introduces a
method which could be used by transport to get all virtqueues that
using a same vector. This is done through QLISTs and the number of
QLISTs was queried through a transport specific method. When guest
setting vectors, the virtqueue will be linked and helpers for traverse
the list was also introduced.
The first user will be virtio pci which will use this to speed up
MSI-X masking and unmasking handling.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The idea is that all other virtio devices are calling this helper
to merge properties of the proxy device. This is the only difference
in between this helper and code in inside virtio_instance_init_common.
The patch should not cause any harm as property list in generic balloon
code is empty.
This also allows to avoid some dummy errors like fixed by this
commit 91ba212088
Author: Gonglei <arei.gonglei@huawei.com>
Date: Tue Sep 30 14:10:35 2014 +0800
virtio-balloon: fix virtio-balloon child refcount in transports
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Raushaniya Maksudova <rmaksudova@parallels.com>
Revieved-by: Cornelia Huck <cornelia.huck@de.ibm.com>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Anthony Liguori <aliguori@amazon.com>
CC: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add virtio_{add,clear}_feature helper functions for manipulating a
feature bits variable. This has some benefits over open coding:
- add check that the bit is in a sane range
- make it obvious at a glance what is going on
- have a central point to change when we want to extend feature bits
Convert existing code manipulating features to use the new helpers.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current support for bus master (clearing OK bit) together with the need to
support guests which do not enable PCI bus mastering, leads to extra state in
VIRTIO_PCI_FLAG_BUS_MASTER_BUG bit, which isn't robust in case of cross-version
migration for the case when guests use the device before setting DRIVER_OK.
Rip out this code, and replace it:
- Modern QEMU doesn't need VIRTIO_PCI_FLAG_BUS_MASTER_BUG
so just drop it for latest machine type.
- For compat machine types, set PCI_COMMAND if DRIVER_OK
is set.
As this is needed for 2.1 for both pc and ppc, move PC_COMPAT macros from pc.h
to a new common header.
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
The virtio-rng backend is currently linked twice, once in the proxy
device (e.g. virtio-rng-pci) and once in virtio-rng-device. This causes
a double unref of the backend when the parent device is unplugged.
To fix this, make the proxy device use an alias, similar to what is
already being done for the iothread link.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1414577839-18695-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Device models should access their block backends only through the
block-backend.h API. Convert them, and drop direct includes of
inappropriate headers.
Just four uses of BlockDriverState are left:
* The Xen paravirtual block device backend (xen_disk.c) opens images
itself when set up via xenbus, bypassing blockdev.c. I figure it
should go through qmp_blockdev_add() instead.
* Device model "usb-storage" prompts for keys. No other device model
does, and this one probably shouldn't do it, either.
* ide_issue_trim_cb() uses bdrv_aio_discard() instead of
blk_aio_discard() because it fishes its backend out of a BlockAIOCB,
which has only the BlockDriverState.
* PC87312State has an unused BlockDriverState[] member.
The next two commits take care of the latter two.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
by making bootindex a writable qom property.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=utUi
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kraxel/tags/pull-bootindex-20141015-1' into staging
allow changing bootorder via monitor at runtime,
by making bootindex a writable qom property.
* remotes/kraxel/tags/pull-bootindex-20141015-1: (34 commits)
bootindex: change fprintf to error_report
bootindex: delete bootindex when device is removed
bootindex: move calling add_boot_device_patch to bootindex setter function
ide: add calling add_boot_device_patch in bootindex setter function
nvma: ide: add bootindex to qom property
usb-storage: add bootindex to qom property
virtio-blk: alias bootindex property explicitly for virt-blk-pci/ccw/s390
block: remove bootindex property from qdev to qom
virtio-blk: add bootindex to qom property
ide: add bootindex to qom property
scsi: add bootindex to qom property
isa-fdc: remove bootindexA/B property from qdev to qom
redirect: remove bootindex property from qdev to qom
vfio: remove bootindex property from qdev to qom
pci-assign: remove bootindex property from qdev to qom
host-libusb: remove bootindex property from qdev to qom
virtio-net: alias bootindex property explicitly for virt-net-pci/ccw/s390
net: remove bootindex property from qdev to qom
usb-net: add bootindex to qom property
vmxnet3: add bootindex to qom property
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the "bootindex" property is a QOM property and not a qdev property
now, we must alias it explicitly for virtio-blk-pci, as well as CCW and
s390-virtio.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since the "bootindex" property is a QOM property and not a qdev property
now, we must alias it explicitly for virtio-net-pci, as well as CCW and
s390-virtio.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
virtio-pci-bus is an internal object of composite
virtio-pci device and it doesn't participate in
-device/device_add hotplug flow, and since it's
not required by bus_add_child() that BUS must
be hotpluggable to be able to add child at runtime,
it's possible to drop not needed 'allow_hotplug'
field.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
yet 100% thread-safe, though, which makes it really, really
experimental. It also brings asynchronous cancellation to
the SCSI subsystem and implements it in virtio-scsi. This
is a pretty important feature. Almost all the work here
was done by Fam Zheng.
I also included the virtio refcount fixes from Gonglei,
because they had a small conflict with virtio-scsi dataplane.
This pull request is using the new subkey 4E6B09D7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJUKpR2AAoJEBRUblpOawnXNLAH/RBeF66ZqWc29dl78JKEbv0+
C5pL61GhlI5vFIjSbPU3/iaZQifw3E4NLvX3SCN5ImsLzBw4r3qerapP2Ut96K/j
5CYdWTF1oqE32oCefvlWhJulHmE1vxGN53BvOz3HHxoehdF1/tJ0wUoZyfztGTOF
tiW85VMewi6CKm47/ns5tSNfGMVzWHqnUg67z/mwN6ZmPFU1dXBlgmiIv8Znahrn
B1AOAeMjWaKvOS+tiYNVG6k0GENWGoiypxiTR3ZXLQKxOYdkh/X0ARULqLMonASX
YsT772nzO9KZDIsdLj9QZZmM7vxs7UhW0MgQlvcSWP9vfZa5SeuRSgoXorPDj3Q=
=54T3
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
This update brings dataplane to virtio-scsi (NOT
yet 100% thread-safe, though, which makes it really, really
experimental. It also brings asynchronous cancellation to
the SCSI subsystem and implements it in virtio-scsi. This
is a pretty important feature. Almost all the work here
was done by Fam Zheng.
I also included the virtio refcount fixes from Gonglei,
because they had a small conflict with virtio-scsi dataplane.
This pull request is using the new subkey 4E6B09D7.
# gpg: Signature made Tue 30 Sep 2014 12:31:02 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream: (39 commits)
block/iscsi: handle failure on malloc of the allocationmap
util: introduce bitmap_try_new
virtio-scsi: Handle TMF request cancellation asynchronously
scsi: Introduce scsi_req_cancel_async
scsi: Introduce scsi_req_cancel_complete
scsi: Drop SCSIReqOps.cancel_io
scsi: Unify request unref in scsi_req_cancel
scsi-generic: Handle canceled request in scsi_command_complete
scsi: Drop scsi_req_abort
virtio-scsi: Process ".iothread" property
virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling
virtio-scsi: Batched prepare for cmd reqs
virtio-scsi: Two stages processing of cmd request
virtio-scsi: Add migration state notifier for dataplane code
virtio-scsi: Hook up with dataplane
virtio-scsi-dataplane: Code to run virtio-scsi on iothread
virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq
virtio-scsi: Add 'iothread' property to virtio-scsi
virtio: add a wrapper for virtio-backend initialization
virtio-9p: fix virtio-9p child refcount in transports
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Similar to this property in virtio-blk for dataplane, add it as a QOM
link in virtio-scsi and an alias in virtio-scsi-pci and virtio-scsi-ccw,
in order to assign an iothread to the device.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For better code sharing, add a helper function that handles
reference counting of the virtio backend for virtio proxy devices.
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is
dropped again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon
unplug the virtio-9p child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio-9p-pci all duplicate the qdev properties of their
V9fsState child. This approach does not work well with
string or pointer properties since we must be careful
about leaking or double-freeing them.
Use the QOM alias property to forward property accesses to the
V9fsState child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-balloon child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-rng child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio-rng-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIORNG child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIORNG child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-serial child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio-serial-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIOSerial child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIOSerial child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-scsi/vhost-scsi child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
{virtio, vhost}-scsi-{pci, s390, ccw} all duplicate the
qdev properties of their VirtIOSCSI/VHostSCSI child.
This approach does not work well with string or pointer
properties since we must be careful about leaking or
double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIOSCSI/VHostSCSI child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-net child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
virtio-net-pci, virtio-net-s390, and virtio-net-ccw all duplicate the
qdev properties of their VirtIONet child. This approach does not work
well with string or pointer properties since we must be careful about
leaking or double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIONet child. This way no duplication is necessary.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Current support for bus master (clearing OK bit)
together with the need to support guests which do not
enable PCI bus mastering, leads to extra state in
VIRTIO_PCI_FLAG_BUS_MASTER_BUG bit, which isn't robust
in case of cross-version migration for the case when
guests use the device before setting DRIVER_OK.
Rip out VIRTIO_PCI_FLAG_BUS_MASTER_BUG and implement a simpler
work-around: treat clearing of PCI_COMMAND as a virtio reset. Old
guests never touch this bit so they will work.
As reset clears device status, DRIVER and MASTER bits are
now in sync, so we can fix up cross-version migration simply
by synchronising them, without need to detect a buggy guest
explicitly.
Drop tracking VIRTIO_PCI_FLAG_BUS_MASTER_BUG completely.
As reset makes the device quiescent, in the future we'll be able to drop
checking OK bit in a bunch of places.
Cc: Jason Wang <jasowang@redhat.com>
Cc: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit cc943c36fa
pci: Use bus master address space for delivering MSI/MSI-X messages
breaks virtio-net for rhel6.[56] x86 guests because they don't
enable bus mastering for virtio PCI devices. For the same reason,
rhel6.[56] ppc64 guests cannot boot on a virtio-blk disk anymore.
Old guests forgot to enable bus mastering, enable it automatically on
DRIVER (guests use some devices before DRIVER_OK).
Reported-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The function is empty after the previous patch, so remove it.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After memory region QOMification QEMU is stricter in detecting
wrong usage of the memory region API. Here it detected a
memory_region_destroy done before the corresponding
memory_region_del_subregion; the memory_region_destroy is
done by msix_uninit_exclusive_bar, the memory_region_del_subregion
is done by the PCI core's pci_unregister_io_regions before
pc->exit is called.
The problem was introduced by
commit 06a1307379
virtio-pci: add device_unplugged callback
As noted in that commit log, virtio device kick callbacks need to be
stopped before generic virtio is cleaned up. This is because these are
notifications from pci proxy to the generic virtio device so they need
to be stopped in the unplug call before the virtio device is unrealized.
However interrupts are notifications from the virtio device to
the pci proxy so they need to stay around while the device
is realized.
The memory API misuse caused an assertion when hot-unplugging virtio
devices. Using the API correctly fixes the assertion.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The two common virtio features can be defined per bus, so move all
into bus class device to make code more clean.
As discussed with cornelia, s390-virtio-blk doesn't support
the two features at all, so keep s390-virtio as it.
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> #for s390 ccw
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
MST: rebase and resolve conflicts
Up until now -device virtio-blk-pci,x-iothread=<id> was used to assign
an IOThread. This was a temporary solution while we cleaned up QOM link
properties.
This patch switches over to a QOM link property since it is now possible
to restrict the setter to unrealized instances and automatically unref
the IOThread when the virtio-blk-pci device is freed.
Since the "iothread" property is a QOM property and not a qdev property,
we must alias it explicitly for virtio-blk-pci, as well as CCW and
s390-virtio.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
object_initialize() leaves the object with a refcount of 1.
object_property_add_child() adds its own reference which is dropped
again when the property is deleted.
The upshot of this is that we always have a refcount >= 1. Upon hot
unplug the virtio-blk child is not finalized!
Drop our reference after the child property has been added to the
parent.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
virtio-blk-pci, virtio-blk-s390, and virtio-blk-ccw all duplicate the
qdev properties of their VirtIOBlock child. This approach does not work
well with string or pointer properties since we must be careful about
leaking or double-freeing them.
Use the QOM alias property to forward property accesses to the
VirtIOBlock child. This way no duplication is necessary.
Remember to stop calling virtio_blk_set_conf() so that we don't clobber
the values already set on the VirtIOBlock instance.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Move the x-data-plane property. Originally it was outside since not
every transport may wish to support dataplane. But that makes little
sense when we have a dedicated CONFIG_VIRTIO_BLK_DATA_PLANE ifdef
already.
This move makes it easier to switch to property aliases in the next
patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Some CPU families can dynamically change their endianness. This means we
can have little endian ppc or big endian arm guests for example. This has
an impact on legacy virtio data structures since they are target endian.
We hence introduce a new property to track the endianness of each virtio
device. It is reasonnably assumed that endianness won't change while the
device is in use : we hence capture the device endianness when it gets
reset.
We migrate this property in a subsection, after the device descriptor. This
means the load code must not rely on it until it is restored. As a consequence,
the vring sanity checks had to be moved after the call to vmstate_load_state().
We enforce paranoia by poisoning the property at the begining of virtio_load().
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We currently have a virtio_is_big_endian() helper that provides the target
endianness to the virtio code. As of today, the helper returns a fixed
compile-time value. Of course, this will have to change if we want to
support target endianness changes at run-time.
Let's move the TARGET_WORDS_BIGENDIAN bits out to a new helper and have
virtio_is_big_endian() implemented on top of it.
This patch doesn't change any functionality.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently vectors silently cleared to 0 if the initialization is failed,
but user should at least have one way to notice this.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There are currently three types of object_property_add_link() callers:
1. The link property may be set at any time.
2. The link property of a DeviceState instance may only be set before
realize.
3. The link property may never be set, it is read-only.
Something similar can already be achieved with
object_property_add_str()'s set() argument. Follow its example and add
a check() argument to object_property_add_link().
Also provide default check() functions for case #1 and #2. Case #3 is
covered by passing a NULL function pointer.
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Tweaked documentation comment]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some object_property_add_link() callers expect property deletion to
unref the link property object. Other callers expect to manage the
refcount themselves. The former are currently broken and therefore leak
the link property object.
This patch adds a flags argument to object_property_add_link() so the
caller can specify which refcount behavior they require. The new
OBJ_PROP_LINK_UNREF_ON_RELEASE flag causes the link pointer to be
unreferenced when the property is deleted.
This fixes refcount leaks in qdev.c, xilinx_axidma.c, xilinx_axienet.c,
s390-virtio-bus.c, virtio-pci.c, virtio-rng.c, and ui/console.c.
Rationale for refcount behavior:
* hw/core/qdev.c
- bus children are explicitly unreferenced, don't interfere
- parent_bus is essentially a read-only property that doesn't hold a
refcount, don't unref
- hotplug_handler is leaked, do unref
* hw/dma/xilinx_axidma.c
- rx stream "dma" links are set using set_link, therefore they
need unref
- tx streams are set using set_link, therefore they need unref
* hw/net/xilinx_axienet.c
- same reasoning as hw/dma/xilinx_axidma.c
* hw/pcmcia/pxa2xx.c
- pxa2xx bypasses set_link and therefore does not use refcounts
* hw/s390x/s390-virtio-bus.c
* hw/virtio/virtio-pci.c
* hw/virtio/virtio-rng.c
* ui/console.c
- set_link is used and there is no explicit unref, do unref
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Replace them with uint8/32/64.
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This fixes a crash in hot-unplug of virtio-pci devices behind a PCIe
switch. The crash happens because the ioeventfd is still set whent the
child is destroyed (destruction happens in postorder). Then the proxy
tries to unset to ioeventfd, but the virtqueue structure that holds the
EventNotifier has been trashed in the meanwhile. kvm_set_ioeventfd_pio
does not expect failure and aborts.
The fix is simply to move parts of uninitialization to a new
device_unplugged callback, which is called before the child is destroyed.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vdev field is complicated to synchronize. Just access the
BusState's list of children.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The vdev field is complicated to synchronize. Just access the
BusState's list of children.
Cc: qemu-stable@nongnu.org
Acked-by: Andreas Faerber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pci_set_irq and the other pci irq wrappers use
PCI_INTERRUPT_PIN config register to compute device
INTx pin to assert/deassert.
An irq is allocated using pci_allocate_irq wrapper
only if is needed by non pci devices.
Removed irq related fields from state if not used anymore.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSIveoAAoJECgfDbjSjVRp2C8IAL7DE0oM0jfEB5DAd8jlULHx
hA8RP21rFzyU8PwtHB+72+C1ImldBge4hvhI+qbsm6PoW3RCeV/lbESIRTiv8dCO
pGUOFmv8MfJAH+WWFsle5mRisoTksYQWWBMHCOqvmaY4JL9pBQOhCLHVhV1XfjtL
hO7uGrWmlijeILv5CxYyPMYuOEdVvRSZKzE+Fp2YKfNstiQrS5fJIlqmwCHrlneW
l2atnt2d9ZV1K8QYiGg4GRVbSAMJvA1wum+0F4gnXIz9yAeOt+Ht1s8cNKQDMouJ
r2OyVgPM9aS/XaO6ejct1Sjo7Vgh/Ublrpw3lFqV/qHix6rEHwy2I3JHFEJPjvk=
=SytJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio_pci: fix level interrupts with irqfd
pc: reduce duplication, fix PIIX descriptions
hw: Clean up bogus default boot order
pci: add config space access traces
pc: fix regression for 64 bit PCI memory
pci: Introduce helper to retrieve a PCI device's DMA address space
Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
commit 62c96360ae
virtio-pci: fix level interrupts
only helps systems without irqfd: on systems with irqfd support we
passed in flag requesting irqfd even when msix is disabled.
As a result, for level interrupts we didn't install an fd handler so
unmasking an fd had no effect.
Fix this up.
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To be passed on to object_initialize_with_type().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (virtio-ccw)
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to object_initialize().
Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.
Signed-off-by: Andreas Färber <afaerber@suse.de>
There's no need to cast the first argument of object_initialize()
to Object. Remove these unnecessary casts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* qemu-kvm/uq/master:
kvm-stub: fix compilation
kvm: shorten the parameter list for get_real_device()
kvm: i386: fix LAPIC TSC deadline timer save/restore
kvm-all.c: max_cpus should not exceed KVM vcpu limit
kvm: Simplify kvm_handle_io
kvm: x86: fix setting IA32_FEATURE_CONTROL with nested VMX disabled
kvm: add KVM_IRQFD_FLAG_RESAMPLE support
kvm: migrate vPMU state
target-i386: remove tabs from target-i386/cpu.h
Initialize IA32_FEATURE_CONTROL MSR in reset and migration
Conflicts:
target-i386/cpu.h
target-i386/kvm.c
aliguori: fixup trivial conflicts due to whitespace and added cpu
argument
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Added an EventNotifier* parameter to
kvm-all.c:kvm_irqchip_add_irqfd_notifier(), in order to give KVM
another eventfd to be used as "resamplefd". See the documentation
in the linux kernel sources in Documentation/virtual/kvm/api.txt
(section 4.75) for more details.
When the added parameter is passed NULL, the behaviour of the
function is unchanged with respect to the previous versions.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
'default_backend' isn't always set, but 'rng' is, so use that.
$ ./x86_64-softmmu/qemu-system-x86_64 -object rng-random,id=rng0,filename=/dev/random -device virtio-rng-pci,rng=rng0
Segmentation fault (core dumped)
Regressed with virtio refactoring in 59ccd20a9a
CC: qemu-stable@nongnu.org
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: bf4505014a0a941dbd3c62068f3cf2c496b69e6a.1370023944.git.crobinso@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The implementation is wrong for kvm, and it's unused anyway.
Drop it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20130528102023.GA30055@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This forwards the name and the type of virtio-net-x to fix the bad
behaviour of "info network" command.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1368619970-23892-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
mask notifiers are never called without msix,
so devices with backend masking like vhost don't work.
Call mask notifiers explicitly at
startup/cleanup to make it work.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The bus name is wrong since the refactoring.
This keeps the behaviour of the command line.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The bus name is wrong since the refactoring.
This keeps the behaviour of the command line.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the proxy id is set, this bus takes the name "id.0" which is expected
to be the virtio-device's first bus.
So force this name to "virtio-bus" as it is an internal bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1367330931-12994-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove virtio-bindings, and use class instead.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove the function pointer in VirtIODevice, and use only
VirtioDeviceClass function pointer.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove the init, exit functions as they are no longer used.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
virtio_x_bus_new are only used in file scope.
So this make them static.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366791683-5350-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-rng-pci is modified for the new API. The device
virtio-rng-pci extends virtio-pci. It creates and connects a virtio-rng-device
during the init. The properties are not changed.
The virtio_pci_reset function, is removed as no longer used.
The virtio_pci_rst function, is renamed virtio_pci_reset.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-rng-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1366790881-3026-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-9p-pci is modified for the new API. The device
virtio-9p-pci extends virtio-pci. It creates and connects a
virtio-9p-device during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-9p-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch refactors existing virtio-scsi code into VirtIOSCSICommon
in order to allow virtio_scsi_init_common() to be used by both internal
virtio_scsi_init() and external vhost-scsi-pci code.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Asias He <asias@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Here the virtio-net-pci is modified for the new API. The device
virtio-net-pci extends virtio-pci. It creates and connects a
virtio-net-device during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-net-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To keep compatibility with the old virtio-balloon-x, add the dynamic properties
to virtio-balloon-pci and virtio-balloon-ccw.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1365941220-8114-1-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-serial-pci is modified for the new API. The device
virtio-serial-pci extends virtio-pci. It creates and connects a
virtio-serial during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-serial which extends virtio-device, so it can be connected
on virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jason Wang