The command is not implemented correctly yet. The documentation allows
to not pass any value to set, in which case the time is re-read from
RTC. However, reading CMOS on Windows is not trivial to implement. So
instead of pretending we've set the correct time, fail explicitly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For memory block command, we only support for linux with sysfs.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This conveys general information about guest memory blocks. Currently,
just the memory block size.
The size of a memory block is architecture dependent, it represents the logical
unit upon which memory online/offline operations are to be performed.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*generalized guest-get-memory-block-size to get-get-memory-block-info
for future extensibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We can change guest's online/offline state of memory blocks, by using
command 'guest-set-memory-blocks'.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We can get guest's memory block information by using command
"guest-get-memory-blocks", the returned value contains a list of memory block
info, such as phys-index, online state, can-offline info.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*replaced guest-triggerable assertion with an error msg
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introduce three new guest commands:
guest-get-memory-blocks, guest-set-memory-blocks, guest-get-memory-block-size.
With these three commands, we can support online/offline guest's memory block
(logical memory hotplug/unplug) as required from host.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*generalized guest-get-memory-block-size to get-get-memory-block-info
for future extensibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The following commands are implemented:
- guest_file_open
- guest_file_close
- guest_file_write
- guest_file_read
- guest_file_seek
- guest_file_flush
Motivation is quite simple: Windows guests should be supported with the
same set of features as Linux one. Also this patch is a prerequisite for
Windows guest-exec command support.
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Moved the code that sets non-blocking flag on fd into a separate function.
Signed-off-by: Simon Zolin <szolin@parallels.com>
Reviewed-by: Roman Kagan <rkagan@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
CC: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add a new 'guest-set-user-password' command for changing the password
of guest OS user accounts. This command is needed to enable OpenStack
to support its API for changing the admin password of guests running
on KVM/QEMU. It is not practical to provide a command at the QEMU
level explicitly targetting administrator account password change
only, since different guest OS have different names for the admin
account. While UNIX systems use 'root', Windows systems typically
use 'Administrator' and even that can be renamed. Higher level apps
like OpenStack have the ability to figure out the correct admin
account name since they have info that QEMU/libvirt do not.
The command accepts either the clear text password string, encoded
in base64 to make it 8-bit safe in JSON:
$ echo -n "123456" | base64
MTIzNDU2
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": false,
"username": "root",
"password": "MTIzNDU2" } }'
{"return":{}}
Or a password that has already been run though a crypt(3) like
algorithm appropriate for the guest, again then base64 encoded:
$ echo -n '$6$n01A2Tau$e...snip...DfMOP7of9AJ1I8q0' | base64
JDYkb...snip...YT2Ey
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": true,
"username": "root",
"password": "JDYkb...snip...YT2Ey" } }'
NB windows support is desirable, but not implemented in this
patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Function send_response(s, &qdict->base) returns a negative number
when any failures occured. But strerror()'s parameter cannot be
negative. Let's change the testing condition and pass '-ret' to
strerr().
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If readdir_r fails, error_setg_errno will reference the freed
pointer *dirpath*.
Moreover, readdir_r may cause a buffer overflow, using readdir instead.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Technically, fcntl(soc, F_SETFL, O_NONBLOCK)
is incorrect since it clobbers all other file flags.
We can use F_GETFL to get the current flags, set or
clear the O_NONBLOCK flag, then use F_SETFL to set the flags.
Using the qemu_set_nonblock() wrapper.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Wangxin <wangxinxin.wang@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently management softwares cannot know whether a qemu-ga command is
supported or not on the running platform until they actually execute it.
This patch disables unsupported commands at launch time of qemu-ga, so that
management softwares can check whether they are supported from 'enabled'
property of the result from 'guest-info' command.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Add command to get mounted filesystems information in the guest.
The returned value contains a list of mountpoint paths and
corresponding disks info such as disk bus type, drive address,
and the disk controllers' PCI addresses, so that management layer
such as libvirt can resolve the disk backends.
For example, when `lsblk' result is:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 1G 0 disk
`-sdb1 8:17 0 1024M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
sdc 8:32 0 1G 0 disk
`-sdc1 8:33 0 512M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
vda 252:0 0 25G 0 disk
`-vda1 252:1 0 25G 0 part /
where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1,
sdc is an IDE disk with PCI controller 0000:00:01.1, and
vda is a virtio-blk disk with PCI device 0000:00:06.0,
guest-get-fsinfo command will return the following result:
{"return":
[{"name":"dm-1",
"mountpoint":"/mnt/test",
"disk":[
{"bus-type":"scsi","bus":0,"unit":1,"target":0,
"pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}},
{"bus-type":"ide","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}],
"type":"xfs"},
{"name":"vda1", "mountpoint":"/",
"disk":[
{"bus-type":"virtio","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}],
"type":"ext4"}]}
In Linux guest, the disk information is resolved from sysfs. So far,
it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86
hosts, and "disk" parameter may be empty for unsupported disk types.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If an array of mount point paths is specified as 'mountpoints' argument
of guest-fsfreeze-freeze-list, qemu-ga will only freeze the file systems
mounted on specified paths in Linux guests. Otherwise, it works as the
same way as guest-fsfreeze-freeze.
This would be useful when the host wants to create partial disk snapshots.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
token should be closed in all conditions.
So move CloseHandle(token) to "out" branch.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
acquire_privilege(), execute_async() and check_suspend_mode() do
nothing when called with an error set. Callers shouldn't do that, and
no caller does. Drop the superfluous tests.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
The error_is_set(errp) in the guest agent command handler functions
are merely fragile, because all chall chains (do_qmp_dispatch() via
the generated marshalling functions) pass a non-null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Using error_is_set(errp) to check whether a function call failed is
fragile: it breaks when errp is null. ga_get_fd_handle() and
guest_file_handle_add() don't return a useful value when they fail,
but that's just stupid. Fix that, and check them instead. As far
as I can tell, errp can't be null there, but this is more robust and
more obviously correct.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We mixed the use of "guest time", "system time", "hardware time",
"RTC" in documentation, it's unclear.
This patch just added two remarks of RTC and replace two "guest time"
by "guest's system time".
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In mingw64-headers-3.1.0, definition of _com_issue_error() is added, which
conflicts with definition in install.cpp. This adds version checking for
mingw headers to disable the definition when the headers>=3.1 is used.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This file does not depend on windows.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add support for isa-serial method for qemu-ga on Windows,
Added -p command line parameter for serial port name
specification, e.g. "-p COM15".
Signed-off-by: Miki Mishael <mmishael@redhat.com>
Signed-off-by: Dmitry Fleytman <dfleytma@redhat.com>
*added default isa-serial path to help output
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qmp_guest_file_seek() allocates memory for a GuestFileRead object
instead of the GuestFileSeek object it actually uses. Harmless,
because the GuestFileRead is slightly larger.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
As the description to the guest-set-time states, the command is
there to ease time synchronization after resume. If guest was
suspended for longer period of time, its system time can go off
so badly, that even NTP refuses to set it. That's why the command
was invented: to give users chance to set the time (not
necessarily 100% correct). However, there's is no real need for
us to require users to pass an arbitrary time. Especially if we
can read the correct value from RTC (boiling down to reading
host's time). Hence this commit enables logic:
guest-set-time() == guest-set-time($now_from_rtc)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When a VSS requester such as vshadow.exe or diskshadow.exe requests to
delete snapshots, qemu-ga VSS provider's DeleteSnapshots() is also called
and returns E_NOTIMPL, that makes the deletion fail.
To avoid this issue, return S_OK and set values that represent no snapshots
are deleted by qemu-ga VSS provider.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When a VSS requester such as vshadow.exe or diskshadow.exe requests to
create disk snapshots, Windows may choose qemu-ga VSS provider if it is
only provider registered on the system. However, because it provides only a
function to freeze the filesystem, the snapshotting fails.
This patch adds a check into CQGAVssProvider::IsVolumeSupported() to reject
the request from other VSS requesters, so that the other provider is chosen.
The check of requester is done by confirming event channels between
qemu-ga's requester and provider established. To ensure that the events are
initialized when CQGAVssProvider::IsVolumeSupported() is called, it moves
the initialization earlier.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
OpenEvent and CreateEvent WinAPI return NULL when failed to open/create
events handles, instead of INVALID_HANDLE_VALUE (although their return
types are HANDLE).
This replaces INVALID_HANDLE_VALUE related to event handles with NULL.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Both code locations cause a compiler warning. Using "%s" instead of "%lu"
would result in a program crash if the wrong code were executed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1385409257-2522-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
were getting forgotten or that did not have a clear maintainer responsible
for making a pull request.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=c4Hz
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'bonzini/tags/for-anthony' into staging
Here are a bunch of 1.7-tagged patches that I was afraid
were getting forgotten or that did not have a clear maintainer responsible
for making a pull request.
# gpg: Signature made Thu 21 Nov 2013 08:40:59 AM PST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found
# By Peter Maydell (3) and others
# Via Paolo Bonzini
* bonzini/tags/for-anthony:
qga: Fix compiler warnings (missing format attribute, wrong format strings)
mips jazz: do not raise data bus exception when accessing invalid addresses
target-i386: yield to another VCPU on PAUSE
rng-egd: offset the point when repeatedly read from the buffer
rng-egd: remove redundant free
target-i386: Fix build by providing stub kvm_arch_get_supported_cpuid()
vfio-pci: Fix multifunction=on
atomic.h: Fix build with clang
pc: get rid of builtin pvpanic for "-M pc-1.5"
configure: Explicitly set ARFLAGS so we can build with GNU Make 4.0
sun4m: Add FCode ROM for TCX framebuffer
Message-id: 1385052578-32352-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Currently, qemu-ga for Windows fails to execute guset-fsfreeze-freeze when
no user is logging in to Windows, with an error message:
{"error":{"class":"GenericError",
"desc":"failed to add C:\\ to snapshotset: (error: 8004230f)"}}
To enable guest-fsfreeze-freeze/thaw without logging in users, this installs
a service to execute qemu-ga VSS provider COM+ application that has full
access privileges to the local system. The service will automatically be
removed when the COM+ application is deregistered.
This patch replaces ICOMAdminCatalog interface with ICOMAdminCatalog2
interface that contains CreateServiceForApplication() method in addition.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Tested-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra):
CC qga/commands.o
qga/commands.c: In function ‘slog’:
qga/commands.c:28:5: error:
function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
g_logv("syslog", G_LOG_LEVEL_INFO, fmt, ap);
^
gcc 4.8.2 reports this warning when slog is declared with the
gnu_printf format attribute:
qga/commands-posix.c: In function ‘qmp_guest_file_open’:
qga/commands-posix.c:404:5: warning:
format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘int64_t’ [-Wformat=]
slog("guest-file-open, handle: %d", handle);
^
On 32 bit hosts there are three more warnings which are also fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now guest agent uses following command to shutdown system:
shutdown -P +0 "blabla"
but this syntax works only with shutdown command from systemd or upstart,
because SysV shutdown requires -h switch.
Following patch changes the command so it works with systemd, upstart and SysV
With upstart/systemd qga use one of thee commands, depending on 'mode' parameter:
shutdown -P +0 "..."
shutdown -H +0 "..."
shutdown -r +0 "..."
SysV equivalents for these are:
shutdown -h -P +0 "..."
shutdown -h -H +0 "..."
shutdown -h -r +0 "..."
and these retain their meaning with upstart/systemd.
According to FreeBSD manpages, shutdown does not accept -P and -H options. Commands should be:
shutdown -p +0 "..."
shutdown -h +0 "..."
shutdown -r +0 "..."
shutdown in Solaris does not accept any of -hHpPr and does not accept time in "+0" format
Signed-off-by: Michael Avdienko <whitearchey@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
While MinGW-w64 can compile the qga code, MinGW from Debian lenny
(gcc-mingw32 4.4.2-3) shows these errors:
In file included from qga/vss-win32.c:17:
qga/vss-win32/requester.h:31:
error: expected »=«, »,«, »;«, »asm« or »__attribute__« before »requester_init«
qga/vss-win32/requester.h:32:
error: expected »=«, »,«, »;«, »asm« or »__attribute__« before »requester_deinit«
The macro STDAPI is unknown, so add the missing include file which
defines it.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Now we have several qemu-ga commands not returning response on success.
It has been documented in qga/qapi-schema.json already. This patch exposes
the 'success-response' flag by extending 'guest-info' command. With this
change, the clients can handle the command response more flexibly.
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*fixed up commit subject
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In the original code, qmp_get_command_list is used to construct
a list of all commands' name. To get the information of all qga
commands, it traverses the name list and search the command info
with its name. So it can cause O(n^2) in the number of commands.
This patch adds an interface to traverse the qmp command list by
QmpCommand to replace qmp_get_command_list. It can decrease the
complexity from O(n^2) to O(n).
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*fix up commit subject
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently, fsfreeze-freeze may cause deadlock if a guest has loopback mounts
of image files in its disk; e.g.:
# mount | grep ^/
/dev/vda1 / type ext4 (rw,noatime,seclabel,data=ordered)
/tmp/disk.img on /mnt type ext4 (rw,relatime,seclabel)
To avoid the deadlock, this freezes filesystems in reverse order of mounts.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*fix up commit msg
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Register QGA VSS provider library into Windows when qemu-ga is installed as
Windows service ('-s install' option). It is deregistered when the service
is uninstalled ('-s uninstall' option).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Support guest-fsfreeze-freeze and guest-fsfreeze-thaw commands for Windows
guests. When fsfreeze command is issued, it calls the VSS requester to
freeze filesystems and applications. On thaw command, it again tells the VSS
requester to thaw them.
This also adds calling of initialize functions for the VSS requester.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Adds VSS provider and requester as a qga-vss.dll, which is loaded by
Windows VSS service as well as by qemu-ga.
"provider.cpp" implements a basic stub of a software VSS provider.
Currently, this module only relays a frozen event from VSS service to the
agent, and thaw event from the agent to VSS service, to block VSS process
to keep the system frozen while snapshots are taken at the host.
To register the provider to the guest system as COM+ application, the type
library (.tlb) for qga-vss.dll is required. To build it from COM IDL (.idl),
VisualC++, MIDL and stdole2.tlb in Windows SDK are required. This patch also
adds pre-compiled .tlb file in the repository in order to enable
cross-compile qemu-ga.exe for Windows with VSS support.
"requester.cpp" provides the VSS requester to kick the VSS snapshot process.
Qemu-ga.exe works without the DLL, although fsfreeze features are disabled.
These functions are only supported in Windows 2003 or later. In older
systems, fsfreeze features are disabled.
In several versions of Windows which don't support attribute
VSS_VOLSNAP_ATTR_NO_AUTORECOVERY, DoSnapshotSet fails with error
VSS_E_OBJECT_NOT_FOUND. In this patch, we just ignore this error.
To solve this fundamentally, we need a framework to handle mount writable
snapshot on guests, which is required by VSS auto-recovery feature
(cleanup phase after a snapshot is taken).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If the user selects a non-default state directory at service installation
time, we should remember it in the registered service.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We shouldn't snprintf() from a buffer to the same buffer.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
On Win32 the local state directory is application specific and users might
expect qemu-ga to create it automatically.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
No effective change on POSIX, but on Win32 the defaults come from the
environment / session.
Since commit 39097daf ("qemu-ga: use key-value store to avoid recycling fd
handles after restart") we've relied on the state directory for the fd
handles' key-value store. Even though we don't support the guest-file-*
commands on win32 yet, the key-value store is written, and it's the first
use of the state directory on win32. We should have a sensible default for
its location.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* mdroth/qga-pull-2013-05-13:
qga: unlink just created guest-file if fchmod() or fdopen() fails on it
qga: distinguish binary modes in "guest_file_open_modes" map
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In Windows guests this may make a difference.
Since the original patch (commit c689b4f1) sought to be pedantic and to
consider theoretical corner cases of portability, we should fix it up
where it failed to come through in that pursuit.
Suggested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The qemu guest agent creates a bunch of files with insecure permissions
when started in daemon mode. For example:
-rw-rw-rw- 1 root root /var/log/qemu-ga.log
-rw-rw-rw- 1 root root /var/run/qga.state
-rw-rw-rw- 1 root root /var/log/qga-fsfreeze-hook.log
In addition, at least all files created with the "guest-file-open" QMP
command, and all files created with shell output redirection (or
otherwise) by utilities invoked by the fsfreeze hook script are affected.
For now mask all file mode bits for "group" and "others" in
become_daemon().
Temporarily, for compatibility reasons, stick with the 0666 file-mode in
case of files newly created by the "guest-file-open" QMP call. Do so
without changing the umask temporarily.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Today we reset fd_counter if it wraps, but it's better to abort()
instead, as fd_counter should never reach INT64_MAX.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*fixed typo: s/resonable/reasonable/
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Part of the wording was shamelessly stolen from Michael Roth's email.
Suggested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Fix various typos and misspellings. The bulk of these were found with
codespell.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These functions don't exist until glib version 2.26. QEMU is currently only
mandating glib 2.12.
This patch replaces the functions with g_key_file_get/set_integer.
Unbreaks the build on Ubuntu 10.04 and RHEL 5.6.
Regression was introduced by 39097daf15
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1363323879-682-1-git-send-email-peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Hosts hold on to handles provided by guest-file-open for periods that can
span beyond the life of the qemu-ga process that issued them. Since these
are issued starting from 0 on every restart, we run the risk of issuing
duplicate handles after restarts/reboots.
As a result, users with a stale copy of these handles may end up
reading/writing corrupted data due to their existing handles effectively
being re-assigned to an unexpected file or offset.
We unfortunately do not issue handles as strings, but as integers, so a
solution such as using UUIDs can't be implemented without introducing a
new interface.
As a workaround, we fix this by implementing a persistent key-value store
that will be used to track the value of the last handle that was issued
across restarts/reboots to avoid issuing duplicates.
The store is automatically written to the same directory we currently
set via --statedir to track fsfreeze state, and so should be applicable
for stable releases where this flag is supported.
A follow-up can use this same store for handling fsfreeze state, but
that change is cosmetic and left out for now.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
* fixed guest_file_handle_add() return value from uint64_t to int64_t
We currently maintain a whitelist of commands that are safe during
fsfreeze. During fsfreeze, we disable all commands that aren't part of
that whitelist.
guest-sync-delimited meets the criteria for being whitelisted, and is
also required for qemu-ga clients that rely on guest-sync-delimited for
re-syncing the channel after a timeout.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Eric Blake <eblake@redhat.com>
In commit 7868e26e59
("qemu-ga: add initial win32 support") support was added for qemu-ga on
Windows using virtio-serial. Other channel methods (ISA serial and UNIX
domain socket) are not supported on Windows.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This patch fixes a compiler warning when cross-build:
qga/service-win32.c: In function 'printf_win_error':
qga/service-win32.c:32:5: warning: format '%d' expects argument of type 'int',
but argument 3 has type 'DWORD' [-Wformat]
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
I figure it's freed somewhere deep down in QAPI, with g_free().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Neglects to free errors allocated by qmp_guest_fsfreeze_thaw().
Spotted by Coverity.
While there, drop the test whether return value is negative (it's
never true), and improve logging.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
g_strdup_printf already handles OOM errors, so some error handling in
QEMU code can be removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We detect errors in several places. One reports with g_error(), which
calls abort(), the others report with g_critical(). Three of them
exit(), three return false.
Always report with g_critical(), and return false.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
*minor fix-up of commit msg
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Spotted by Coverity. Also document why we keep it open on success.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
After open(), the file offset is already zero, and neither lockf() nor
ftruncate() change it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
For clarity, and to hush up Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This function sets O_CLOEXEC on the log file fd so that it isn't
leaked to executed processes.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Amos Kong <akong@redhat.com>
Tested-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This ensures that O_CLOEXEC is passed to open(), this way the
pid file fd is not leaked to executed processes.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Amos Kong <akong@redhat.com>
Tested-by: Amos Kong <akong@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* stefanha/trivial-patches:
hw/pc.c: Fix converting of ioport_register* to MemoryRegion
Replace remaining gmtime, localtime by gmtime_r, localtime_r
savevm: Remove MinGW specific code which is no longer needed
qga/channel-posix.c: Explicitly include string.h
configure: Fix comment (copy+paste bug)
readline: avoid memcpy() of overlapping regions
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Explicitly include string.h to avoid warnings under MacOS X/clang
about implicit declarations of strerror() and strlen().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To use the online disk snapshot for online-backup, application-level
consistency of the snapshot image is required. However, currently the
guest agent can provide only filesystem-level consistency, and the
snapshot may contain dirty data, for example, incomplete transactions.
This patch provides the opportunity to quiesce applications before
snapshot is taken.
If --fsfreeze-hook option is specified, the hook is executed with
"freeze" argument before the filesystem is frozen by fsfreeze-freeze
command. As for fsfreeze-thaw command, the hook is executed with "thaw"
argument after the filesystem is thawed.
This patch depends on patchset to improve error reporting by Luiz Capitulino:
http://lists.gnu.org/archive/html/qemu-devel/2012-11/msg03016.html
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
*clarified usage in help output
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Most errors are QERR_UNDEFINED_ERROR today.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Most errors are QERR_UNDEFINED_ERROR today.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Convert them to error_setg_errno().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Convert them to error_setg_errno().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Convert them to error_setg_errno().
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Most errors are QERR_UNDEFINED_ERROR. Also, adds ga_wait_child() as
a future commit will use it too.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Use error_setg_errno() when possible with an improved error description.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*Fixed missing space character in error message
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Include:
- <errno.h> for errno
- <unistd.h> & <fcntl.h> for fcntl()
- <stdlib.h> for exit()
- "osdep.h" for qemu_open()
Some of those headers were probably being included by accident because
some other headers were including qemu-common.h, but those headers
should eventually stop including qemu-common.h.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This lets me adjust the clients to do proper error propagation first,
thus avoiding temporary regressions in the quality of the error messages.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* 'trivial-patches' of git://github.com/stefanha/qemu:
versatilepb: Use symbolic indices for ARM PIC
qdev: kill bogus comment
qemu-barrier: Fix compiler version check for future gcc versions
hw: Add missing 'static' attribute for QEMUMachine
cleanup useless return sentence
qemu-sockets: Fix compiler warning (regression for MinGW)
vnc: Fix spelling (hellmen -> hellman) in comment
slirp: Fix spelling in comment (enought -> enough, insure -> ensure)
tcg/arm: Use tcg_out_mov_reg rather than inline equivalent code
cpu: Add missing 'static' attribute to qemu_global_mutex
configure: Support empty target list (--target-list=)
hw: Fix return value check for bdrv_read, bdrv_write
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
NUL-termination of the .ifr_name field is not required, but is fine
(and preferable to using strncpy and leaving the reader to wonder),
since the first thing the linux kernel does is to clear the last byte.
Besides, using pstrcpy here makes this setting of ifr_name consistent
with the other code (e.g., net/tap-linux.c) that does the same thing.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch will fix the following linking failed:
LINK qemu-ga
gcc: error: qga/../qapi-generated/qga-qapi-types.o: No such file or directory
gcc: error: qga/../qapi-generated/qga-qapi-visit.o: No such file or directory
gcc: error: qga/../qapi-generated/qga-qmp-marshal.o: No such file or directory
make: *** [qemu-ga] Error 1
Commit cdc976b040 changes the
dependencies of qemu-ga to depend "../qapi-generated/qga-qapi-types.o",
which will be expanded to "qga/../qapi-generated/qga-qapi-types.o" when
building qemu-ga.
In top-level Makefile, we defined a target "qapi-generated/qga-qapi-types.o"
which was not equal to "qga/../qapi-generated/qga-qapi-types" in the
Makefile world. So "No such file" error happened when qemu-ga was linking.
The easy approach to fix is to change the target name to
"qga/../qapi-generated/qga-qapi-types.o", but it is weird.
So, in order to solve it more graciously, I move those temporary
files(qga-qapi-*.{c,h}) qemu-ga depends on to qemu-ga/qapi-generated,
this makes dependencies more clearer.
Signed-off-by: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
No reason to leave them out, and it will ensure that the dependencies
are picked up. Later we can perhaps move the files to another
directory to avoid ../ usage.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
FITRIM is a mounted filesystem feature to discard (or "trim") blocks which
are not in use by the filesystem. This is useful for solid-state drives
(SSDs) and thinly-provisioned storage. Provide access to the feature
from the host so that filesystems can be trimmed periodically or before
migration.
Here is an example using scsi_debug:
# modprobe scsi_debug lbpu=1 lbpws=1
# sg_vpd -p0xb2 /dev/sdb
Logical block provisioning VPD page (SBC):
Unmap command supported (LBPU): 1
Write same (16) with unmap bit supported (LBWS): 1
Write same (10) with unmap bit supported (LBWS10): 0
# mke2fs /dev/sdb
# cat /sys/bus/pseudo/drivers/scsi_debug/map
1-616,16257-16383
# mount /dev/sdb /run/media/pbonzini/test
# dd if=/dev/zero of=/run/media/pbonzini/test/file
# cat map
1-616,645-1588,1599-4026,4029-16383
# rm /run/media/pbonzini/test/file
# ./qemu-ga /dev/fd/0
{"execute":"guest-fstrim"}
{"return": {}}
# cat map
1-612
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
We will use these functions and types for more than FSFREEZE, so rename them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently we re-read/re-process /etc/mtab to get an updated list of
mounts when guest-fsfreeze-thaw is called. This can cause an atime
update on /etc/mtab, which will block if we're in a frozen state.
Instead, use /proc's version of mtab, which may not be up-to-date with
options passed via -o remount, but is compatible for our use cases since
we only care about the filesystem type.
Reported-by: Matsuda, Daiki <matsudadik@intellilink.co.jp>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Use _NSGetEnviron() helper to access the environment.
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Cc: Charlie Somerville <charlie@charliesomerville.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 3674838cd0 uses the environ global
variable, but is relying on environ to be declared somewhere else.
This worked for me because on F16 environ is declared in <unistd.h>, but
that doesn't happen in OpenBSD for example, causing a build failure.
This commit fixes the build error by declaring environ if it hasn't
being declared yet.
Also fixes a build warning due to a missing <sys/wait.h> include.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Previously qemu-ga version was defined seperately. Since it is aligned
with QEMU releases, use QEMU_VERSION instead. This also implies the
version bump for 1.1[-rcN] release of qemu-ga.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
POSIX mandates[1] that a child process of a multi-thread program uses
only async-signal-safe functions before exec(). We consider qemu-ga
to be multi-thread, because it uses glib.
However, qmp_guest_shutdown() uses functions that are not
async-signal-safe. Fix it the following way:
- fclose() -> reopen_fd_to_null()
- execl() -> execle()
- exit() -> _exit()
- drop slog() usage (which is not safe)
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/fork.html
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Last commit dropped qemu-ga's SIGCHLD handler, used to automatically
reap terminated children processes. This introduced a bug to
qmp_guest_shutdown(): it will generate zombies.
This problem probably doesn't matter in the success case, as the VM
will shutdown anyway, but let's do the right thing and reap the
created process. This ultimately means that guest-shutdown is now a
synchronous command.
An interesting side effect is that guest-shutdown is now able to
report an error to the client if shutting down fails.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Currently, qemu-ga has a SIGCHLD handler that automatically reaps terminated
children processes. The idea is to avoid having qemu-ga commands blocked
waiting for children to terminate.
That approach has two problems:
1. qemu-ga is unable to detect errors in the child, meaning that qemu-ga
returns success even if the child fails to perform its task
2. if a command does depend on the child exit status, the command has to
play tricks to bypass the automatic reaper
Case 2 impacts the guest-suspend-* API, because it has to execute an external
program to check for suspend support. Today, to bypass the automatic reaper,
suspend code has to double fork and pass exit status information through a
pipe. Besides being complex, this is prone to race condition bugs. Indeed,
the current code does have such bugs.
Making the guest-suspend-* API synchronous (ie. by dropping the SIGCHLD
handler and calling waitpid() from commands) is a much simpler approach,
which fixes current race conditions bugs and enables commands to detect
errors in the child.
This commit does just that. There's a side effect though, guest-shutdown
will generate zombies if shutting down fails. This will be fixed by the
next commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The next commit wants to use it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
These were identified using: http://github.com/lyda/misspell-check
and run like this to create a bourne shell script using GNU sed's
-i option:
git ls-files|grep -vF .bin | misspellings -f - |grep -v '^ERROR:' |perl \
-pe 's/^(.*?)\[(\d+)\]: (\w+) -> "(.*?)"$/sed -i '\''${2}s!$3!$4!'\'' $1/'
Manually eliding the FP, "rela->real" and resolving "addres" to
address (not "adders") we get this:
sed -i '450s!thru!through!' Changelog
sed -i '260s!neccessary!necessary!' coroutine-sigaltstack.c
sed -i '54s!miniscule!minuscule!' disas.c
sed -i '1094s!thru!through!' hw/usb/hcd-ehci.c
sed -i '1095s!thru!through!' hw/usb/hcd-ehci.c
sed -i '21s!unecessary!unnecessary!' qapi-schema-guest.json
sed -i '307s!explictly!explicitly!' qemu-ga.c
sed -i '490s!preceeding!preceding!' qga/commands-posix.c
sed -i '792s!addres!address!' qga/commands-posix.c
sed -i '6s!beeing!being!' tests/tcg/test-mmap.c
Also, manually fix "arithmentic", spotted by Peter Maydell:
sed -i 's!arithmentic!arithmetic!' coroutine-sigaltstack.c
Signed-off-by: Jim Meyering <meyering@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
* mdroth/qga-pull-4-27-12:
qemu-ga: persist tracking of fsfreeze state via filesystem
qemu-ga: add a whitelist for fsfreeze-safe commands
qemu-ga: improve recovery options for fsfreeze
ga_channel_open() was using open flag O_ASYNC for SIGIO-driven I/O.
This breaks on illumos, so fall back to POSIX I_SETSIG ioctl (SIGPOLL).
Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Currently we rely on fsfreeze/thaw commands disabling/enabling logging
then having other commands check whether logging is disabled to avoid
executing if they aren't safe for running while a filesystem is frozen.
Instead, have an explicit whitelist of fsfreeze-safe commands, and
consolidate logging and command enablement/disablement into a pair
of helper functions: ga_set_frozen()/ga_unset_frozen()
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
guest-fsfreeze-thaw relies on state information obtained from
guest-fsfreeze-freeze to determine what filesystems to unfreeze.
This is unreliable due to the fact that that state does not account
for FIFREEZE being issued by other processes, or previous instances
of qemu-ga. This means in certain situations we cannot thaw
filesystems even with a responsive qemu-ga instance at our disposal.
This patch allows guest-fsfreeze-thaw to be issued unconditionally.
It also adds some additional logic to allow us to thaw filesystems
regardless of how many times the filesystem's "frozen" refcount has
been incremented by any guest processes.
Also, guest-fsfreeze-freeze now operates atomically: on success all
freezable filesystems are frozen, and on error all filesystems are
thawed. The ambiguous "GUEST_FSFREEZE_STATUS_ERROR" state is no
longer entered.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
When linux-specific commands (including guest-fsfreeze-*) were consolidated
under defined(__linux__), we forgot to account for the case where
defined(__linux__) && !defined(FIFREEZE). As a result stubs are no longer
being generated on linux hosts that don't have FIFREEZE support. Fix
this.
Tested-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
In the function ga_channel_write(), the handle ov.hEvent is created
by the call to CreateEvent(). However, the handle is not closed
prior to the function return.
This patch closes the handle before the return of the function.
Kudos to Paolo Bonzini for spotting this bug.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Acked-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
guest-sync leaves it as an exercise to the user as to how to reliably
obtain the response to guest-sync if the client had previously read in a
partial response (due qemu-ga previously being restarted mid-"sentence"
due to reboot, forced restart, etc).
qemu-ga handles this situation on its end by having a client precede
their guest-sync request with a 0xFF byte (invalid UTF-8), which
qemu-ga/QEMU JSON parsers will treat as a flush event. Thus we can
reliably flush the qemu-ga parser state in preparation for receiving
the guest-sync request.
guest-sync-delimited provides the same functionality for a client: when
a guest-sync-delimited is issued, qemu-ga will precede it's response
with a 0xFF byte that the client can use as an indicator to flush its
buffer/parser state in preparation for reliably receiving the
guest-sync-delimited response.
It is also useful as an optimization for clients, since, after issuing a
guest-sync-delimited, clients can safely discard all stale data read
from the channel until the 0xFF is found.
More information available on the wiki:
http://wiki.qemu.org/Features/QAPI/GuestAgent#QEMU_Guest_Agent_Protocol
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This command returns an array of:
[ifname, hwaddr, [ipaddr, ipaddr_family, prefix] ]
for each interface in the system.
Currently, only IPv4 and IPv6 are supported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Implement guest-suspend-disk RPC for Windows. Functionally this should be
equivalent to the posix implementation.
Signed-off-by: Gal Hammer <ghammer@redhat.com>
As the command name implies, this command suspends the guest to disk.
The suspend operation is implemented by two functions: bios_supports_mode()
and guest_suspend(). Both functions are generic enough to be used by
other suspend modes (introduced by next commits).
Both functions will try to use the scripts provided by the pm-utils
package if it's available. If it's not available, a manual method,
which consists of directly writing to '/sys/power/state', will be used.
To reap terminated children, a new signal handler is installed in the
parent to catch SIGCHLD signals and a non-blocking call to waitpid()
is done to collect their exit statuses. The statuses, however, are
discarded.
The approach used to query the guest for suspend support deserves some
explanation. It's implemented by bios_supports_mode() and shown below:
qemu-ga
|
create pipe
|
fork()
-----------------
| |
| |
| fork()
| --------------------------
| | |
| | |
| | exec('pm-is-supported')
| |
| wait()
| write exit status to pipe
| exit
|
read pipe
This might look complex, but the resulting code is quite simple.
The purpose of that approach is to allow qemu-ga to reap its children
(semi-)automatically from its SIGCHLD handler.
Implementing this the obvious way, that's, doing the exec() call from
the first child process, would force us to introduce a more complex way
to reap qemu-ga's children. Like registering PIDs to be reaped and
having a way to wait for them when returning their exit status to
qemu-ga is necessary. The approach explained above avoids that complexity.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Implement guest-shutdown RPC for Windows. Functionally this should be
equivalent to the posix implementation.
Original patch by Gal Hammer <ghammer@redhat.com>
This allows qemu-ga to function as a Windows service:
- to install the service (will auto-start on boot):
qemu-ga --service install
- to start the service:
net start qemu-ga
- to stop the service:
net stop qemu-ga
- to uninstall service:
qemu-ga --service uninstall
Original patch by Gal Hammer <ghammer@redhat.com>
This adds a win32 channel implementation that makes qemu-ga functional
on Windows using virtio-serial (unix-listen/isa-serial not currently
implemented). Unlike with the posix implementation, we do not use
GIOChannel for the following reasons:
- glib calls stat() on an fd to check whether S_IFCHR is set, which is
the case for virtio-serial on win32. Because of that, a one-time
check to determine whether the channel is readable is done by making
a call to PeekConsoleInput(), which reports the underlying handle is
not a valid console handle, and thus we can never read from the
channel.
- if one goes as far as to "trick" glib into thinking it is a normal
file descripter, the buffering is done in such a way that data
written to the output stream will subsequently result in that same
data being read back as if it were input, causing an error loop.
furthermore, a forced flush of the channel only moves the data into a
secondary buffer managed by glib, so there's no way to prevent output
from getting read back as input.
The implementation here ties into the glib main loop by implementing a
custom GSource that continually submits asynchronous/overlapped I/O to
fill an GAChannel-managed read buffer, and tells glib to poll the
corresponding event handle for a completion whenever there is no
data/RPC in the read buffer to notify the main application about.
Various stubs and #ifdefs to compile for Windows using mingw
cross-build. Still has 1 linker error due to a dependency on the
forthcoming win32 versions of the GAChannel/transport class.
Many of the current RPC implementations are very much POSIX-specific
and require complete re-writes for Windows. There are however a small
set of core guest agent commands that are common to both, and other
commands such as guest-file-* which *may* be portable. So we introduce
commands.c for the latter, and will rename guest-agent-commands.c to
commands-posix.c in a future commit. Windows implementations will go in
commands-win32.c, eventually.
This is mostly in preparation for the win32 port, which won't use
GIO channels for reasons that will be made clearer later. Here the
GAChannel class is just a loose wrapper around GIOChannel
calls/callbacks, but we also roll in the logic/configuration for
various channel types and managing unix socket connections, which makes
the abstraction much more complete and further aids in the win32 port
since isa-serial/unix-listen will not be supported initially.
There's also a bit of refactoring in the main logic to consolidate the
exit paths so we can do common cleanup for things like pid files, which
weren't always cleaned up previously.
Not that there is blacklisting functionality we can no longer infer
the agent's capabilities via version. This patch extends the current
guest-info RPC to also return a list of dictionaries containing the name
of each supported RPC, along with a boolean indicating whether or not
the command has been disabled by a guest administrator/distro.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is the actual guest daemon, it listens for requests over a
virtio-serial/isa-serial/unix socket channel and routes them through
to dispatch routines, and writes the results back to the channel in
a manner similar to QMP.
A shorthand invocation:
qemu-ga -d
Is equivalent to:
qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 \
-f /var/run/qemu-ga.pid -d
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
Michal Privoznik