If qemu couldn't find out what O_DIRECT alignment to use with a given
file, it would run into assert(bdrv_opt_mem_align(bs) != 0); in block.c
and confuse users. This adds a more descriptive error message for such
cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
qcow2's report_unsupported_feature() had two bugs: A 32 bit truncation
would prevent feature table entries for bits 32-63 from being used, and
it could assign errp multiple times if there was more than one unknown
feature, resulting in an error_set() assertion failure.
Fix the truncation, make sure to set the error exactly once and add a
qemu-iotests case for it.
This fixes https://bugs.launchpad.net/qemu/+bug/1342704/
Reported-by: Maria Kustova <maria.k@catit.be>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
when hotplug virtio-scsi disks using laio, the aio_nr will
increase in laio_init() by io_setup(), we can see the number by
# cat /proc/sys/fs/aio-nr
128
if the aio_nr attach the maxnum, which found from
# cat /proc/sys/fs/aio-max-nr
65536
the hotplug process will fail because of aio context leak.
Fix it by io_destroy in laio_cleanup().
Reported-by: daifulai <daifulai@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
At least raw-posix relies on this because it can allocate bounce buffers
based on the request length, but access it using all of the qiov entries
later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
If a QED image has a shorter backing file and a read request to
unallocated clusters goes across EOF of the backing file, the backing
file sees a shortened request and the rest is filled with zeros.
However, the original too long qiov was used with the shortened request.
This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
If a qcow2 image has a shorter backing file and a read request to
unallocated clusters goes across EOF of the backing file, the backing
file sees a shortened request and the rest is filled with zeros.
However, the original too long qiov was used with the shortened request.
This patch makes the qiov size match the request size, avoiding a
potential buffer overflow in raw-posix.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When doing a block backup of an image with an unaligned size (with
respect to the BACKUP_CLUSTER_SIZE), qemu would check the allocation
status of sectors after the end of the image. bdrv_is_allocated()
returns a result that is valid for 0 sectors in this case, so the backup
job ran into an endless loop.
Stop looping when seeing a result valid for 0 sectors, we're at EOF then.
The test case looks somewhat unrelated at first sight because I
originally tried to reproduce a different suspected bug that turned out
to not exist. Still a good test case and it accidentally found this one.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch implements .bdrv_io_plug, .bdrv_io_unplug and
.bdrv_flush_io_queue callbacks for linux-aio Block Drivers,
so that submitting I/O as a batch can be supported on linux-aio.
[Unprocessed requests are completed with -EIO instead of a bogus ret
value.
--Stefan]
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We got a merry mix of -1 and -errno here.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
When mirroring an image of a size that is not a multiple of the
mirror job granularity, the last request would have the right nb_sectors
argument, but a qiov that is rounded up to the next multiple of the
granularity. Don't do this.
This fixes a segfault that is caused by raw-posix being confused by this
and allocating a buffer with request length, but operating on it with
qiov length.
[s/Driver/Drive/ in qemu-iotests 041 as suggested by Eric
--Stefan]
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block job.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-stream api, the user is able to change
the backing file of the active layer as part of the block-stream
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the active image metadata fails, then the block-stream
operation returns failure, without disrupting the guest.
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On some image chains, QEMU may not always be able to resolve the
filenames properly, when updating the backing file of an image
after a block commit.
For instance, certain relative pathnames may fail, or drives may
have been specified originally by file descriptor (e.g. /dev/fd/???),
or a relative protocol pathname may have been used.
In these instances, QEMU may lack the information to be able to make
the correct choice, but the user or management layer most likely does
have that knowledge.
With this extension to the block-commit api, the user is able to change
the backing file of the overlay image as part of the block-commit
operation.
This allows the change to be 'safe', in the sense that if the attempt
to write the overlay image metadata fails, then the block-commit
operation returns failure, without disrupting the guest.
If the commit top is the active layer, then specifying the backing
file string will be treated as an error (there is no overlay image
to modify in that case).
If a backing file string is not specified in the command, the backing
file string to use is determined in the same manner as it was
previously.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 25814e8987 introduced an error-exit code path which does
a "goto exit" before the cow_bs variable is initialized, meaning
we would call bdrv_unref() on an uninitialized variable and
likely segfault. Fix this by moving the NULL-initialization
to the top of the function and making the exit code path handle
the case where it is NULL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add 'nocow' option so that users could have a chance to set NOCOW flag to
newly created files. It's useful on btrfs file system to enhance performance.
Btrfs has low performance when hosting VM images, even more when the guest
in those VM are also using btrfs as file system. One way to mitigate this bad
performance is to turn off COW attributes on VM files. Generally, there are
two ways to turn off NOCOW on btrfs: a) by mounting fs with nodatacow, then
all newly created files will be NOCOW. b) per file. Add the NOCOW file
attribute. It could only be done to empty or new files.
This patch tries the second way, according to the option, it could add NOCOW
per file.
For most block drivers, since the create file step is in raw-posix.c, so we
can do setting NOCOW flag ioctl in raw-posix.c only.
But there are some exceptions, like block/vpc.c and block/vdi.c, they are
creating file by calling qemu_open directly. For them, do the same setting
NOCOW flag ioctl work in them separately.
[Fixed up 082.out due to the new 'nocow' creation option
--Stefan]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
drive-mirror will bdrv_swap the new BDS named node-name with the one
pointed by replaces when the mirroring is finished.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make query-blockstats safe for dataplane by acquiring the
BlockDriverState's AioContext. This ensures that the dataplane IOThread
and the main loop's monitor code do not race.
Note the assumption that acquiring the drive's BDS AioContext also
protects ->file and ->backing_hd. This assumption is made by other
aio_context_acquire() callers too.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This function is only called from block/qapi.c. There is no need to
keep it public.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
On read operations when this parameter is set and some replicas are corrupted
while quorum can be reached quorum will proceed to rewrite the correct version
of the data to fix the corrupted replicas.
This will shine with SSD where the FTL will remap the same block at another
place on rewrite.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since we parse backing.* options to add a backing file from the command
line when the driver didn't assign one, it has been possible to have a
backing file for e.g. raw images (it just was never accessed).
This is obvious nonsense and should be rejected.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
upcoming libnfs will feature internal readahead support.
Add a knob to pass the optional readahead value as a URL
parameter.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
this patch fixes the incorrect usage of strncmp and
adds simple error checking by means of parse_uint_full
instead of atoi for the supplied URL parameters.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When mirroring or active committing a zero length image, BLOCK_JOB_READY
is not reported now, instead the job completes because we short circuit
the mirror job loop.
This is inconsistent with non-zero length images, and only confuses
management software.
Let's do the same thing when seeing a 0-length image: report ready
immediately; wait for block-job-cancel or block-job-complete; clear the
cancel flag as existing non-zero image synced case (cancelled after
ready); then jump to the exit.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since BLOCK_JOB_COMPLETED, BLOCK_JOB_CANCELLED, BLOCK_JOB_READY are
related, convert them in one patch. The block_job_event_* functions
are used to keep encapsulation of BlockJob structure.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Following command
qemu-img create -f qcow2 sheepdog:test 20g
will cause core dump because aio_context is NULL in sd_create. We should
initialize it by qemu_get_aio_context() to avoid NULL dereference.
Cc: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
during rebasing the changed init value for the
retry counter was missed. This resulted in no retries
being performed at all.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch lifts the minimum supported libiscsi version from 1.4.0 to
1.9.0 since the BUSY patch required that change.
On one this allows us to remove all #ifdefs from the code which
makes the code easier to maintain and read. On the other hand
I would not recommend libiscsi prior to 1.8.0 for production use
because the following important libiscsi fixes for deadlocks and
protocol errors are missing prior to 1.8.0:
dbe9a1e SOCKET queue cmd PDUs directly in waitpdu queue
30df192 DATA-OUT set pdu->cmdsn appropriately
548bd22 ISCSI fix broken send logic in iscsi_scsi_async_command
14bee10 RECONNECT do not increase CmdSN for immediate PDUs
1f4a66a PDU queue out PDUs in order of itt.
562dd46 PDU avoid incrementing itt to 0xffffffff
cd09c0f PDU use serial32 arithmetic for cmdsn, maxcmdsn and expcmdsn.
89e918e SOCKET validate data_size in in_pdu header
91267f5 Limit immediate and unsolicited data to FirstBurstLength
Note that libiscsi 1.9.0 was released on Feb 24th, 2013, about
one month after 1.8.0.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch changes the driver to uses 16 Byte CDBs for
READ/WRITE only if the target requires 64bit lba addressing.
On one hand this saves 6 bytes in each PDU on the other
hand it seems that 10 Byte CDBs seems to be much better
supported and tested as a recent issue I had with a
major storage supplier lined out.
For WRITESAME the logic is a bit more tricky as WRITESAME10
with UNMAP was added really late. Thus a fallback to WRITESAME16
is possible if it supports UNMAP and WRITESAME10 not.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
it might happen in the future that a function directly invokes its callback.
In this case we end up in a segfault because the iTask is gone when the BH
is scheduled.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch adds handling of BUSY status reponse from an iSCSI target.
Currently, we fail with -EIO in case of SCSI_STATUS_BUSY while the
obvious reaction would be to retry the operation after some time.
The retry time is randomly choosen from a range with exponential
growth increasing with each retry.
This patch includes most of the changes by a an upcoming patch
from Stefan Hajnoczi:
iscsi: implement .bdrv_detach/attach_aio_context()
because I also need the reference to the aio_context for
the retry timer to work. I included the changes to maintain
better mergeability.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that all backend drivers are using QemuOpts, remove all
QEMUOptionParameter related codes.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
One extra change is to define QED_DEFAULT_CLUSTER_SIZE = 65536 instead
of 64 * 1024; because:
according to existing create_options, "cluster size" has default value =
QED_DEFAULT_CLUSTER_SIZE, after switching to create_opts, this has to be
stringized and set to .def_value_str. That is,
.def_value_str = stringify(QED_DEFAULT_CLUSTER_SIZE),
so the QED_DEFAULT_CLUSTER_SIZE could not be a expression.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf